diff options
Diffstat (limited to 'drivers/ide/pmac.c')
| -rw-r--r-- | drivers/ide/pmac.c | 330 |
1 files changed, 164 insertions, 166 deletions
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 74625e821a4..2db803cd095 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -28,11 +28,13 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/notifier.h> +#include <linux/module.h> #include <linux/reboot.h> #include <linux/pci.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/scatterlist.h> +#include <linux/slab.h> #include <asm/prom.h> #include <asm/io.h> @@ -43,10 +45,7 @@ #include <asm/pmac_feature.h> #include <asm/sections.h> #include <asm/irq.h> - -#ifndef CONFIG_PPC64 #include <asm/mediabay.h> -#endif #define DRV_NAME "ide-pmac" @@ -59,13 +58,14 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; struct device_node* node; struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; + ide_hwif_t *hwif; + /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -404,9 +404,6 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) #define IDE_WAKEUP_DELAY (1*HZ) static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); -static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); -static void pmac_ide_selectproc(ide_drive_t *drive); -static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -416,12 +413,10 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); * timing register when selecting that unit. This version is for * ASICs with a single timing register */ -static void -pmac_ide_selectproc(ide_drive_t *drive) +static void pmac_ide_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); @@ -435,12 +430,10 @@ pmac_ide_selectproc(ide_drive_t *drive) * timing register when selecting that unit. This version is for * ASICs with a dual timing register (Kauai) */ -static void -pmac_ide_kauai_selectproc(ide_drive_t *drive) +static void pmac_ide_kauai_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) { writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); @@ -459,15 +452,30 @@ static void pmac_ide_do_update_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (pmif->kind == controller_sh_ata6 || pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6) - pmac_ide_kauai_selectproc(drive); + pmac_ide_kauai_apply_timings(drive); else - pmac_ide_selectproc(drive); + pmac_ide_apply_timings(drive); +} + +static void pmac_dev_select(ide_drive_t *drive) +{ + pmac_ide_apply_timings(drive); + + writeb(drive->select | ATA_DEVICE_OBS, + (void __iomem *)drive->hwif->io_ports.device_addr); +} + +static void pmac_kauai_dev_select(ide_drive_t *drive) +{ + pmac_ide_kauai_apply_timings(drive); + + writeb(drive->select | ATA_DEVICE_OBS, + (void __iomem *)drive->hwif->io_ports.device_addr); } static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) @@ -477,17 +485,8 @@ static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) + IDE_TIMING_CONFIG)); } -static void pmac_set_irq(ide_hwif_t *hwif, int on) +static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl) { - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); (void)readl((void __iomem *)(hwif->io_ports.data_addr + IDE_TIMING_CONFIG)); @@ -496,12 +495,10 @@ static void pmac_set_irq(ide_hwif_t *hwif, int on) /* * Old tuning functions (called on hdparm -p), sets up drive PIO timings */ -static void -pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; @@ -778,14 +775,13 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, #endif } -static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); int ret = 0; u32 *timings, *timings2, tl[2]; u8 unit = drive->dn & 1; + const u8 speed = drive->dma_mode; timings = &pmif->timings[unit]; timings2 = &pmif->timings[unit+2]; @@ -852,6 +848,11 @@ sanitize_timings(pmac_ide_hwif_t *pmif) pmif->timings[2] = pmif->timings[3] = value2; } +static int on_media_bay(pmac_ide_hwif_t *pmif) +{ + return pmif->mdev && pmif->mdev->media_bay != NULL; +} + /* Suspend call back, should be called after the child devices * have actually been suspended */ @@ -864,7 +865,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) disable_irq(pmif->irq); /* The media bay will handle itself just fine */ - if (pmif->mediabay) + if (on_media_bay(pmif)) return 0; /* Kauai has bus control FCRs directly here */ @@ -887,7 +888,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) { /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ - if (!pmif->mediabay) { + if (!on_media_bay(pmif)) { ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); msleep(10); @@ -913,14 +914,21 @@ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct device_node *np = pmif->node; const char *cable = of_get_property(np, "cable-type", NULL); + struct device_node *root = of_find_node_by_path("/"); + const char *model = of_get_property(root, "model", NULL); /* Get cable type from device-tree. */ - if (cable && !strncmp(cable, "80-", 3)) - return ATA_CBL_PATA80; + if (cable && !strncmp(cable, "80-", 3)) { + /* Some drives fail to detect 80c cable in PowerBook */ + /* These machine use proprietary short IDE cable anyway */ + if (!strncmp(model, "PowerBook", 9)) + return ATA_CBL_PATA40_SHORT; + else + return ATA_CBL_PATA80; + } /* * G5's seem to have incorrect cable type in device-tree. @@ -937,16 +945,13 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) static void pmac_ide_init_dev(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + if (on_media_bay(pmif)) { + if (check_media_bay(pmif->mdev->media_bay) == MB_CD) { drive->dev_flags &= ~IDE_DFLAG_NOPROBE; return; } -#endif drive->dev_flags |= IDE_DFLAG_NOPROBE; } } @@ -955,9 +960,9 @@ static const struct ide_tp_ops pmac_tp_ops = { .exec_command = pmac_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = pmac_write_devctl, - .set_irq = pmac_set_irq, - + .dev_select = pmac_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -965,19 +970,24 @@ static const struct ide_tp_ops pmac_tp_ops = { .output_data = ide_output_data, }; -static const struct ide_port_ops pmac_ide_ata6_port_ops = { - .init_dev = pmac_ide_init_dev, - .set_pio_mode = pmac_ide_set_pio_mode, - .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_kauai_selectproc, - .cable_detect = pmac_ide_cable_detect, +static const struct ide_tp_ops pmac_ata6_tp_ops = { + .exec_command = pmac_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = pmac_write_devctl, + + .dev_select = pmac_kauai_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, }; static const struct ide_port_ops pmac_ide_ata4_port_ops = { .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, .cable_detect = pmac_ide_cable_detect, }; @@ -985,7 +995,6 @@ static const struct ide_port_ops pmac_ide_port_ops = { .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, }; static const struct ide_dma_ops pmac_dma_ops; @@ -1009,28 +1018,31 @@ static const struct ide_port_info pmac_port_info = { * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). */ -static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) +static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, struct ide_hw *hw) { struct device_node *np = pmif->node; const int *bidp; struct ide_host *host; ide_hwif_t *hwif; - hw_regs_t *hws[] = { hw, NULL, NULL, NULL }; + struct ide_hw *hws[] = { hw }; struct ide_port_info d = pmac_port_info; int rc; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA6; } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { @@ -1054,26 +1066,23 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) writel(KAUAI_FCR_UATA_MAGIC | KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); - - pmif->mediabay = 0; /* Make sure we have sane timings */ sanitize_timings(pmif); - host = ide_host_alloc(&d, hws); - if (host == NULL) - return -ENOMEM; - hwif = host->ports[0]; + /* If we are on a media bay, wait for it to settle and lock it */ + if (pmif->mdev) + lock_media_bay(pmif->mdev->media_bay); -#ifndef CONFIG_PPC64 - /* XXX FIXME: Media bay stuff need re-organizing */ - if (np->parent && np->parent->name - && strcasecmp(np->parent->name, "media-bay") == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, - hwif); -#endif /* CONFIG_PMAC_MEDIABAY */ - pmif->mediabay = 1; + host = ide_host_alloc(&d, hws, 1); + if (host == NULL) { + rc = -ENOMEM; + goto bail; + } + hwif = pmif->hwif = host->ports[0]; + + if (on_media_bay(pmif)) { + /* Fixup bus ID for media bay */ if (!bidp) pmif->aapl_bus_id = 1; } else if (pmif->kind == controller_ohare) { @@ -1082,9 +1091,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) * units, I keep the old way */ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); - } else -#endif - { + } else { /* This is necessary to enable IDE when net-booting */ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); @@ -1094,20 +1101,24 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) } printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " - "bus ID %d%s, irq %d\n", model_name[pmif->kind], - pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hw->irq); + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + on_media_bay(pmif) ? " (mediabay)" : "", hw->irq); rc = ide_host_register(host, &d, hws); - if (rc) { - ide_host_free(host); - return rc; - } + if (rc) + pmif->hwif = NULL; - return 0; + if (pmif->mdev) + unlock_media_bay(pmif->mdev->media_bay); + + bail: + if (rc && host) + ide_host_free(host); + return rc; } -static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) +static void pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) { int i; @@ -1120,14 +1131,14 @@ static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) /* * Attach to a macio probed interface */ -static int __devinit -pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) +static int pmac_ide_macio_attach(struct macio_dev *mdev, + const struct of_device_id *match) { void __iomem *base; unsigned long regbase; pmac_ide_hwif_t *pmif; int irq, rc; - hw_regs_t hw; + struct ide_hw hw; pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); if (pmif == NULL) @@ -1135,7 +1146,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no address for %s\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); rc = -ENXIO; goto out_free_pmif; } @@ -1143,7 +1154,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) /* Request memory resource for IO ports */ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { printk(KERN_ERR "ide-pmac: can't request MMIO resource for " - "%s!\n", mdev->ofdev.node->full_name); + "%s!\n", mdev->ofdev.dev.of_node->full_name); rc = -EBUSY; goto out_free_pmif; } @@ -1155,7 +1166,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) */ if (macio_irq_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " - "13\n", mdev->ofdev.node->full_name); + "13\n", mdev->ofdev.dev.of_node->full_name); irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1164,7 +1175,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) regbase = (unsigned long) base; pmif->mdev = mdev; - pmif->node = mdev->ofdev.node; + pmif->node = mdev->ofdev.dev.of_node; pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; @@ -1173,7 +1184,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " "resource for %s!\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); else pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else @@ -1210,8 +1221,7 @@ out_free_pmif: static int pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mesg.event != mdev->ofdev.dev.power.power_state.event @@ -1227,8 +1237,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) static int pmac_ide_macio_resume(struct macio_dev *mdev) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { @@ -1243,15 +1252,15 @@ pmac_ide_macio_resume(struct macio_dev *mdev) /* * Attach to a PCI probed interface */ -static int __devinit -pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) +static int pmac_ide_pci_attach(struct pci_dev *pdev, + const struct pci_device_id *id) { struct device_node *np; pmac_ide_hwif_t *pmif; void __iomem *base; unsigned long rbase, rlen; int rc; - hw_regs_t hw; + struct ide_hw hw; np = pci_device_to_OF_node(pdev); if (np == NULL) { @@ -1300,7 +1309,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ - pci_set_drvdata(pdev, NULL); iounmap(base); pci_release_regions(pdev); kfree(pmif); @@ -1316,7 +1324,7 @@ out_free_pmif: static int pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (mesg.event != pdev->dev.power.power_state.event @@ -1332,7 +1340,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) static int pmac_ide_pci_resume(struct pci_dev *pdev) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (pdev->dev.power.power_state.event != PM_EVENT_ON) { @@ -1344,6 +1352,24 @@ pmac_ide_pci_resume(struct pci_dev *pdev) return rc; } +#ifdef CONFIG_PMAC_MEDIABAY +static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state) +{ + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); + + switch(mb_state) { + case MB_CD: + if (!pmif->hwif->present) + ide_port_scan(pmif->hwif); + break; + default: + if (pmif->hwif->present) + ide_port_unregister_devices(pmif->hwif); + } +} +#endif /* CONFIG_PMAC_MEDIABAY */ + + static struct of_device_id pmac_ide_macio_match[] = { { @@ -1363,11 +1389,17 @@ static struct of_device_id pmac_ide_macio_match[] = static struct macio_driver pmac_ide_macio_driver = { - .name = "ide-pmac", - .match_table = pmac_ide_macio_match, + .driver = { + .name = "ide-pmac", + .owner = THIS_MODULE, + .of_match_table = pmac_ide_macio_match, + }, .probe = pmac_ide_macio_attach, .suspend = pmac_ide_macio_suspend, .resume = pmac_ide_macio_resume, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = pmac_ide_macio_mb_event, +#endif }; static const struct pci_device_id pmac_ide_pci_match[] = { @@ -1422,17 +1454,15 @@ out: * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. */ -static int -pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) +static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct dbdma_cmd *table; - int i, count = 0; volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; struct scatterlist *sg; - int wr = (rq_data_dir(rq) == WRITE); + int wr = !!(cmd->tf_flags & IDE_TFLAG_WRITE); + int i = cmd->sg_nents, count = 0; /* DMA table is already aligned */ table = (struct dbdma_cmd *) pmif->dma_table_cpu; @@ -1442,11 +1472,6 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) while (readl(&dma->status) & RUN) udelay(1); - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; - /* Build DBDMA commands list */ sg = hwif->sg_table; while (i && sg_dma_len(sg)) { @@ -1462,7 +1487,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) "switching to PIO on Ohare chipset\n", drive->name); pmif->broken_dma_warn = 1; } - goto use_pio_instead; + return 0; } while (cur_len) { unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; @@ -1470,7 +1495,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) if (count++ >= MAX_DCMDS) { printk(KERN_WARNING "%s: DMA table too small\n", drive->name); - goto use_pio_instead; + return 0; } st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE); st_le16(&table->req_count, tc); @@ -1499,9 +1524,6 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name); -use_pio_instead: - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } @@ -1509,39 +1531,26 @@ use_pio_instead: * Prepare a DMA transfer. We build the DMA table, adjust the timings for * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion */ -static int -pmac_ide_dma_setup(ide_drive_t *drive) +static int pmac_ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct request *rq = hwif->rq; + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); + u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); - if (!pmac_ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); + if (pmac_ide_build_dmatable(drive, cmd) == 0) return 1; - } /* Apple adds 60ns to wrDataSetup on reads */ if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) { - writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0), + writel(pmif->timings[unit] + (write ? 0 : 0x00800000UL), PMAC_IDE_REG(IDE_TIMING_CONFIG)); (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); } - drive->waiting_for_dma = 1; - return 0; } -static void -pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL); -} - /* * Kick the DMA controller into life after the DMA command has been issued * to the drive. @@ -1550,8 +1559,7 @@ static void pmac_ide_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; dma = pmif->dma_regs; @@ -1568,17 +1576,13 @@ static int pmac_ide_dma_end (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; u32 dstat; - drive->waiting_for_dma = 0; dstat = readl(&dma->status); writel(((RUN|WAKE|DEAD) << 16), &dma->control); - ide_destroy_dmatable(drive); - /* verify good dma status. we don't check for ACTIVE beeing 0. We should... * in theory, but with ATAPI decices doing buffer underruns, that would * cause us to disable DMA, which isn't what we want @@ -1596,8 +1600,7 @@ static int pmac_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status, timeout; @@ -1635,8 +1638,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) if ((status & FLUSH) == 0) break; if (++timeout > 100) { - printk(KERN_WARNING "ide%d, ide_dma_test_irq \ - timeout flushing channel\n", hwif->index); + printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n", + hwif->index); break; } } @@ -1651,8 +1654,7 @@ static void pmac_ide_dma_lost_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status = readl(&dma->status); @@ -1662,11 +1664,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) static const struct ide_dma_ops pmac_dma_ops = { .dma_host_set = pmac_ide_dma_host_set, .dma_setup = pmac_ide_dma_setup, - .dma_exec_cmd = pmac_ide_dma_exec_cmd, .dma_start = pmac_ide_dma_start, .dma_end = pmac_ide_dma_end, .dma_test_irq = pmac_ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = pmac_ide_dma_lost_irq, }; @@ -1674,11 +1674,9 @@ static const struct ide_dma_ops pmac_dma_ops = { * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent @@ -1691,7 +1689,7 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, * The +2 is +1 for the stop command and +1 to allow for * aligning the start address to a multiple of 16 bytes. */ - pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent( + pmif->dma_table_cpu = pci_alloc_consistent( dev, (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), &hwif->dmatable_dma); |
