aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/sc1200.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/sc1200.c')
-rw-r--r--drivers/ide/pci/sc1200.c460
1 files changed, 0 insertions, 460 deletions
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
deleted file mode 100644
index 79ecab68948..00000000000
--- a/drivers/ide/pci/sc1200.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * linux/drivers/ide/pci/sc1200.c Version 0.95 Jun 16 2007
- *
- * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor.
- *
- * Documentation:
- * Available from National Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define SC1200_REV_A 0x00
-#define SC1200_REV_B1 0x01
-#define SC1200_REV_B3 0x02
-#define SC1200_REV_C1 0x03
-#define SC1200_REV_D1 0x04
-
-#define PCI_CLK_33 0x00
-#define PCI_CLK_48 0x01
-#define PCI_CLK_66 0x02
-#define PCI_CLK_33A 0x03
-
-static unsigned short sc1200_get_pci_clock (void)
-{
- unsigned char chip_id, silicon_revision;
- unsigned int pci_clock;
- /*
- * Check the silicon revision, as not all versions of the chip
- * have the register with the fast PCI bus timings.
- */
- chip_id = inb (0x903c);
- silicon_revision = inb (0x903d);
-
- // Read the fast pci clock frequency
- if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) {
- pci_clock = PCI_CLK_33;
- } else {
- // check clock generator configuration (cfcc)
- // the clock is in bits 8 and 9 of this word
-
- pci_clock = inw (0x901e);
- pci_clock >>= 8;
- pci_clock &= 0x03;
- if (pci_clock == PCI_CLK_33A)
- pci_clock = PCI_CLK_33;
- }
- return pci_clock;
-}
-
-extern char *ide_xfer_verbose (byte xfer_rate);
-
-/*
- * Set a new transfer mode at the drive
- */
-static int sc1200_set_xfer_mode (ide_drive_t *drive, byte mode)
-{
- printk("%s: sc1200_set_xfer_mode(%s)\n", drive->name, ide_xfer_verbose(mode));
- return ide_config_drive_speed(drive, mode);
-}
-
-/*
- * Here are the standard PIO mode 0-4 timings for each "format".
- * Format-0 uses fast data reg timings, with slower command reg timings.
- * Format-1 uses fast timings for all registers, but won't work with all drives.
- */
-static const unsigned int sc1200_pio_timings[4][5] =
- {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
- {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
- {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz
-
-/*
- * After chip reset, the PIO timings are set to 0x00009172, which is not valid.
- */
-//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-
-static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *pdev = hwif->pci_dev;
- unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
-
- pci_read_config_dword(pdev, basereg + 4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
- sc1200_pio_timings[format][pio]);
-}
-
-/*
- * The SC1200 specifies that two drives sharing a cable cannot mix
- * UDMA/MDMA. It has to be one or the other, for the pair, though
- * different timings can still be chosen for each drive. We could
- * set the appropriate timing bits on the fly, but that might be
- * a bit confusing. So, for now we statically handle this requirement
- * by looking at our mate drive to see what it is capable of, before
- * choosing a mode for our own drive.
- */
-static u8 sc1200_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
- struct hd_driveid *mateid = mate->id;
- u8 mask = hwif->ultra_mask;
-
- if (mate->present == 0)
- goto out;
-
- if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
- goto out;
- if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
- mask = 0;
- }
-out:
- return mask;
-}
-
-static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- unsigned int reg, timings;
- unsigned short pci_clock;
- unsigned int basereg = hwif->channel ? 0x50 : 0x40;
-
- /*
- * Tell the drive to switch to the new mode; abort on failure.
- */
- if (sc1200_set_xfer_mode(drive, mode))
- return 1; /* failure */
-
- pci_clock = sc1200_get_pci_clock();
-
- /*
- * Now tune the chipset to match the drive:
- *
- * Note that each DMA mode has several timings associated with it.
- * The correct timing depends on the fast PCI clock freq.
- */
- timings = 0;
- switch (mode) {
- case XFER_UDMA_0:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00921250; break;
- case PCI_CLK_48: timings = 0x00932470; break;
- case PCI_CLK_66: timings = 0x009436a1; break;
- }
- break;
- case XFER_UDMA_1:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00911140; break;
- case PCI_CLK_48: timings = 0x00922260; break;
- case PCI_CLK_66: timings = 0x00933481; break;
- }
- break;
- case XFER_UDMA_2:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00911030; break;
- case PCI_CLK_48: timings = 0x00922140; break;
- case PCI_CLK_66: timings = 0x00923261; break;
- }
- break;
- case XFER_MW_DMA_0:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00077771; break;
- case PCI_CLK_48: timings = 0x000bbbb2; break;
- case PCI_CLK_66: timings = 0x000ffff3; break;
- }
- break;
- case XFER_MW_DMA_1:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00012121; break;
- case PCI_CLK_48: timings = 0x00024241; break;
- case PCI_CLK_66: timings = 0x00035352; break;
- }
- break;
- case XFER_MW_DMA_2:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00002020; break;
- case PCI_CLK_48: timings = 0x00013131; break;
- case PCI_CLK_66: timings = 0x00015151; break;
- }
- break;
- default:
- BUG();
- break;
- }
-
- if (unit == 0) { /* are we configuring drive0? */
- pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
- timings |= reg & 0x80000000; /* preserve PIO format bit */
- pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
- } else {
- pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
- }
-
- return 0; /* success */
-}
-
-/*
- * sc1200_config_dma() handles selection/setting of DMA/UDMA modes
- * for both the chipset and drive.
- */
-static int sc1200_config_dma (ide_drive_t *drive)
-{
- if (ide_tune_dma(drive))
- return 0;
-
- return 1;
-}
-
-
-/* Replacement for the standard ide_dma_end action in
- * dma_proc.
- *
- * returns 1 on error, 0 otherwise
- */
-static int sc1200_ide_dma_end (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long dma_base = hwif->dma_base;
- byte dma_stat;
-
- dma_stat = inb(dma_base+2); /* get DMA status */
-
- if (!(dma_stat & 4))
- printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n",
- dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2));
-
- outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */
- outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */
-
- drive->waiting_for_dma = 0;
- ide_destroy_dmatable(drive); /* purge DMA mappings */
-
- return (dma_stat & 7) != 4; /* verify good DMA status */
-}
-
-/*
- * sc1200_set_pio_mode() handles setting of PIO modes
- * for both the chipset and drive.
- *
- * All existing BIOSs for this chipset guarantee that all drives
- * will have valid default PIO timings set up before we get here.
- */
-
-static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int mode = -1;
-
- /*
- * bad abuse of ->set_pio_mode interface
- */
- switch (pio) {
- case 200: mode = XFER_UDMA_0; break;
- case 201: mode = XFER_UDMA_1; break;
- case 202: mode = XFER_UDMA_2; break;
- case 100: mode = XFER_MW_DMA_0; break;
- case 101: mode = XFER_MW_DMA_1; break;
- case 102: mode = XFER_MW_DMA_2; break;
- }
- if (mode != -1) {
- printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- hwif->dma_off_quietly(drive);
- if (sc1200_tune_chipset(drive, mode) == 0)
- hwif->dma_host_on(drive);
- return;
- }
-
- if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
- sc1200_tunepio(drive, pio);
-}
-
-#ifdef CONFIG_PM
-static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
-{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
- if (prev) {
- if (hwif == prev)
- prev = NULL; // found previous, now look for next match
- } else {
- if (hwif && hwif->pci_dev == dev)
- return hwif; // found next match
- }
- }
- return NULL; // not found
-}
-
-typedef struct sc1200_saved_state_s {
- __u32 regs[4];
-} sc1200_saved_state_t;
-
-
-static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
-{
- ide_hwif_t *hwif = NULL;
-
- printk("SC1200: suspend(%u)\n", state.event);
-
- if (state.event == PM_EVENT_ON) {
- // we only save state when going from full power to less
-
- //
- // Loop over all interfaces that are part of this PCI device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- sc1200_saved_state_t *ss;
- unsigned int basereg, r;
- //
- // allocate a permanent save area, if not already allocated
- //
- ss = (sc1200_saved_state_t *)hwif->config_data;
- if (ss == NULL) {
- ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
- if (ss == NULL)
- return -ENOMEM;
- hwif->config_data = (unsigned long)ss;
- }
- ss = (sc1200_saved_state_t *)hwif->config_data;
- //
- // Save timing registers: this may be unnecessary if
- // BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- for (r = 0; r < 4; ++r) {
- pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
- }
- }
- }
-
- /* You don't need to iterate over disks -- sysfs should have done that for you already */
-
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
- dev->current_state = state.event;
- return 0;
-}
-
-static int sc1200_resume (struct pci_dev *dev)
-{
- ide_hwif_t *hwif = NULL;
-
- pci_set_power_state(dev, PCI_D0); // bring chip back from sleep state
- dev->current_state = PM_EVENT_ON;
- pci_enable_device(dev);
- //
- // loop over all interfaces that are part of this pci device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- unsigned int basereg, r;
- sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data;
-
- //
- // Restore timing registers: this may be unnecessary if BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- if (ss != NULL) {
- for (r = 0; r < 4; ++r) {
- pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
- }
- }
- }
- return 0;
-}
-#endif
-
-/*
- * This gets invoked by the IDE driver once for each channel,
- * and performs channel-specific pre-initialization before drive probing.
- */
-static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
-{
- if (hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
- hwif->autodma = 0;
- if (hwif->dma_base) {
- hwif->udma_filter = sc1200_udma_filter;
- hwif->ide_dma_check = &sc1200_config_dma;
- hwif->ide_dma_end = &sc1200_ide_dma_end;
- if (!noautodma)
- hwif->autodma = 1;
-
- hwif->set_pio_mode = &sc1200_set_pio_mode;
- hwif->speedproc = &sc1200_tune_chipset;
- }
- hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x07;
- hwif->mwdma_mask = 0x07;
-
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
-}
-
-static ide_pci_device_t sc1200_chipset __devinitdata = {
- .name = "SC1200",
- .init_hwif = init_hwif_sc1200,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- .host_flags = IDE_HFLAG_ABUSE_DMA_MODES,
- .pio_mask = ATA_PIO4,
-};
-
-static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_setup_pci_device(dev, &sc1200_chipset);
-}
-
-static struct pci_device_id sc1200_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE), 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
-
-static struct pci_driver driver = {
- .name = "SC1200_IDE",
- .id_table = sc1200_pci_tbl,
- .probe = sc1200_init_one,
-#ifdef CONFIG_PM
- .suspend = sc1200_suspend,
- .resume = sc1200_resume,
-#endif
-};
-
-static int __init sc1200_ide_init(void)
-{
- return ide_pci_register_driver(&driver);
-}
-
-module_init(sc1200_ide_init);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
-MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 22:02:01 +0000