diff options
Diffstat (limited to 'drivers/ide/pci/alim15x3.c')
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 918 |
1 files changed, 0 insertions, 918 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c deleted file mode 100644 index cf84350efc5..00000000000 --- a/drivers/ide/pci/alim15x3.c +++ /dev/null @@ -1,918 +0,0 @@ -/* - * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 - * - * Copyright (C) 1998-2000 Michel Aubry, Maintainer - * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer - * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer - * - * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) - * May be copied or modified under the terms of the GNU General Public License - * Copyright (C) 2002 Alan Cox <alan@redhat.com> - * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> - * - * (U)DMA capable version of ali 1533/1543(C), 1535(D) - * - ********************************************************************** - * 9/7/99 --Parts from the above author are included and need to be - * converted into standard interface, once I finish the thought. - * - * Recent changes - * Don't use LBA48 mode on ALi <= 0xC4 - * Don't poke 0x79 with a non ALi northbridge - * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang) - * Allow UDMA6 on revisions > 0xC4 - * - * Documentation - * Chipset documentation available under NDA only - * - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DISPLAY_ALI_TIMINGS - -/* - * ALi devices are not plug in. Otherwise these static values would - * need to go. They ought to go away anyway - */ - -static u8 m5229_revision; -static u8 chip_is_1543c_e; -static struct pci_dev *isa_dev; - -#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) -#include <linux/stat.h> -#include <linux/proc_fs.h> - -static u8 ali_proc = 0; - -static struct pci_dev *bmide_dev; - -static char *fifo[4] = { - "FIFO Off", - "FIFO On ", - "DMA mode", - "PIO mode" }; - -static char *udmaT[8] = { - "1.5T", - " 2T", - "2.5T", - " 3T", - "3.5T", - " 4T", - " 6T", - " 8T" -}; - -static char *channel_status[8] = { - "OK ", - "busy ", - "DRQ ", - "DRQ busy ", - "error ", - "error busy ", - "error DRQ ", - "error DRQ busy" -}; - -/** - * ali_get_info - generate proc file for ALi IDE - * @buffer: buffer to fill - * @addr: address of user start in buffer - * @offset: offset into 'file' - * @count: buffer count - * - * Walks the Ali devices and outputs summary data on the tuning and - * anything else that will help with debugging - */ - -static int ali_get_info (char *buffer, char **addr, off_t offset, int count) -{ - unsigned long bibma; - u8 reg53h, reg5xh, reg5yh, reg5xh1, reg5yh1, c0, c1, rev, tmp; - char *q, *p = buffer; - - /* fetch rev. */ - pci_read_config_byte(bmide_dev, 0x08, &rev); - if (rev >= 0xc1) /* M1543C or newer */ - udmaT[7] = " ???"; - else - fifo[3] = " ??? "; - - /* first fetch bibma: */ - - bibma = pci_resource_start(bmide_dev, 4); - - /* - * at that point bibma+0x2 et bibma+0xa are byte - * registers to investigate: - */ - c0 = inb(bibma + 0x02); - c1 = inb(bibma + 0x0a); - - p += sprintf(p, - "\n Ali M15x3 Chipset.\n"); - p += sprintf(p, - " ------------------\n"); - pci_read_config_byte(bmide_dev, 0x78, ®53h); - p += sprintf(p, "PCI Clock: %d.\n", reg53h); - - pci_read_config_byte(bmide_dev, 0x53, ®53h); - p += sprintf(p, - "CD_ROM FIFO:%s, CD_ROM DMA:%s\n", - (reg53h & 0x02) ? "Yes" : "No ", - (reg53h & 0x01) ? "Yes" : "No " ); - pci_read_config_byte(bmide_dev, 0x74, ®53h); - p += sprintf(p, - "FIFO Status: contains %d Words, runs%s%s\n\n", - (reg53h & 0x3f), - (reg53h & 0x40) ? " OVERWR" : "", - (reg53h & 0x80) ? " OVERRD." : "." ); - - p += sprintf(p, - "-------------------primary channel" - "-------------------secondary channel" - "---------\n\n"); - - pci_read_config_byte(bmide_dev, 0x09, ®53h); - p += sprintf(p, - "channel status: %s" - " %s\n", - (reg53h & 0x20) ? "On " : "Off", - (reg53h & 0x10) ? "On " : "Off" ); - - p += sprintf(p, - "both channels togth: %s" - " %s\n", - (c0&0x80) ? "No " : "Yes", - (c1&0x80) ? "No " : "Yes" ); - - pci_read_config_byte(bmide_dev, 0x76, ®53h); - p += sprintf(p, - "Channel state: %s %s\n", - channel_status[reg53h & 0x07], - channel_status[(reg53h & 0x70) >> 4] ); - - pci_read_config_byte(bmide_dev, 0x58, ®5xh); - pci_read_config_byte(bmide_dev, 0x5c, ®5yh); - p += sprintf(p, - "Add. Setup Timing: %dT" - " %dT\n", - (reg5xh & 0x07) ? (reg5xh & 0x07) : 8, - (reg5yh & 0x07) ? (reg5yh & 0x07) : 8 ); - - pci_read_config_byte(bmide_dev, 0x59, ®5xh); - pci_read_config_byte(bmide_dev, 0x5d, ®5yh); - p += sprintf(p, - "Command Act. Count: %dT" - " %dT\n" - "Command Rec. Count: %dT" - " %dT\n\n", - (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, - (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, - (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, - (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16 ); - - p += sprintf(p, - "----------------drive0-----------drive1" - "------------drive0-----------drive1------\n\n"); - p += sprintf(p, - "DMA enabled: %s %s" - " %s %s\n", - (c0&0x20) ? "Yes" : "No ", - (c0&0x40) ? "Yes" : "No ", - (c1&0x20) ? "Yes" : "No ", - (c1&0x40) ? "Yes" : "No " ); - - pci_read_config_byte(bmide_dev, 0x54, ®5xh); - pci_read_config_byte(bmide_dev, 0x55, ®5yh); - q = "FIFO threshold: %2d Words %2d Words" - " %2d Words %2d Words\n"; - if (rev < 0xc1) { - if ((rev == 0x20) && - (pci_read_config_byte(bmide_dev, 0x4f, &tmp), (tmp &= 0x20))) { - p += sprintf(p, q, 8, 8, 8, 8); - } else { - p += sprintf(p, q, - (reg5xh & 0x03) + 12, - ((reg5xh & 0x30)>>4) + 12, - (reg5yh & 0x03) + 12, - ((reg5yh & 0x30)>>4) + 12 ); - } - } else { - int t1 = (tmp = (reg5xh & 0x03)) ? (tmp << 3) : 4; - int t2 = (tmp = ((reg5xh & 0x30)>>4)) ? (tmp << 3) : 4; - int t3 = (tmp = (reg5yh & 0x03)) ? (tmp << 3) : 4; - int t4 = (tmp = ((reg5yh & 0x30)>>4)) ? (tmp << 3) : 4; - p += sprintf(p, q, t1, t2, t3, t4); - } - -#if 0 - p += sprintf(p, - "FIFO threshold: %2d Words %2d Words" - " %2d Words %2d Words\n", - (reg5xh & 0x03) + 12, - ((reg5xh & 0x30)>>4) + 12, - (reg5yh & 0x03) + 12, - ((reg5yh & 0x30)>>4) + 12 ); -#endif - - p += sprintf(p, - "FIFO mode: %s %s %s %s\n", - fifo[((reg5xh & 0x0c) >> 2)], - fifo[((reg5xh & 0xc0) >> 6)], - fifo[((reg5yh & 0x0c) >> 2)], - fifo[((reg5yh & 0xc0) >> 6)] ); - - pci_read_config_byte(bmide_dev, 0x5a, ®5xh); - pci_read_config_byte(bmide_dev, 0x5b, ®5xh1); - pci_read_config_byte(bmide_dev, 0x5e, ®5yh); - pci_read_config_byte(bmide_dev, 0x5f, ®5yh1); - - p += sprintf(p,/* - "------------------drive0-----------drive1" - "------------drive0-----------drive1------\n")*/ - "Dt RW act. Cnt %2dT %2dT" - " %2dT %2dT\n" - "Dt RW rec. Cnt %2dT %2dT" - " %2dT %2dT\n\n", - (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, - (reg5xh1 & 0x70) ? ((reg5xh1 & 0x70) >> 4) : 8, - (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, - (reg5yh1 & 0x70) ? ((reg5yh1 & 0x70) >> 4) : 8, - (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, - (reg5xh1 & 0x0f) ? (reg5xh1 & 0x0f) : 16, - (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16, - (reg5yh1 & 0x0f) ? (reg5yh1 & 0x0f) : 16 ); - - p += sprintf(p, - "-----------------------------------UDMA Timings" - "--------------------------------\n\n"); - - pci_read_config_byte(bmide_dev, 0x56, ®5xh); - pci_read_config_byte(bmide_dev, 0x57, ®5yh); - p += sprintf(p, - "UDMA: %s %s" - " %s %s\n" - "UDMA timings: %s %s" - " %s %s\n\n", - (reg5xh & 0x08) ? "OK" : "No", - (reg5xh & 0x80) ? "OK" : "No", - (reg5yh & 0x08) ? "OK" : "No", - (reg5yh & 0x80) ? "OK" : "No", - udmaT[(reg5xh & 0x07)], - udmaT[(reg5xh & 0x70) >> 4], - udmaT[reg5yh & 0x07], - udmaT[(reg5yh & 0x70) >> 4] ); - - return p-buffer; /* => must be less than 4k! */ -} -#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ - -/** - * ali15x3_tune_drive - set up a drive - * @drive: drive to tune - * @pio: unused - * - * Select the best PIO timing for the drive in question. Then - * program the controller for this drive set up - */ - -static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) -{ - ide_pio_data_t d; - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - int s_time, a_time, c_time; - u8 s_clc, a_clc, r_clc; - unsigned long flags; - int bus_speed = system_bus_clock(); - int port = hwif->channel ? 0x5c : 0x58; - int portFIFO = hwif->channel ? 0x55 : 0x54; - u8 cd_dma_fifo = 0; - int unit = drive->select.b.unit & 1; - - pio = ide_get_best_pio_mode(drive, pio, 5, &d); - s_time = ide_pio_timings[pio].setup_time; - a_time = ide_pio_timings[pio].active_time; - if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) - s_clc = 0; - if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) - a_clc = 0; - c_time = ide_pio_timings[pio].cycle_time; - -#if 0 - if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16) - r_clc = 0; -#endif - - if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { - r_clc = 1; - } else { - if (r_clc >= 16) - r_clc = 0; - } - local_irq_save(flags); - - /* - * PIO mode => ATA FIFO on, ATAPI FIFO off - */ - pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); - if (drive->media==ide_disk) { - if (unit) { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); - } else { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); - } - } else { - if (unit) { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); - } else { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); - } - } - - pci_write_config_byte(dev, port, s_clc); - pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); - local_irq_restore(flags); - - /* - * setup active rec - * { 70, 165, 365 }, PIO Mode 0 - * { 50, 125, 208 }, PIO Mode 1 - * { 30, 100, 110 }, PIO Mode 2 - * { 30, 80, 70 }, PIO Mode 3 with IORDY - * { 25, 70, 25 }, PIO Mode 4 with IORDY ns - * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) - */ - -} - -/** - * ali15x3_can_ultra - check for ultra DMA support - * @drive: drive to do the check - * - * Check the drive and controller revisions. Return 0 if UDMA is - * not available, or 1 if UDMA can be used. The actual rules for - * the ALi are - * No UDMA on revisions <= 0x20 - * Disk only for revisions < 0xC2 - * Not WDC drives for revisions < 0xC2 - * - * FIXME: WDC ifdef needs to die - */ - -static u8 ali15x3_can_ultra (ide_drive_t *drive) -{ -#ifndef CONFIG_WDC_ALI15X3 - struct hd_driveid *id = drive->id; -#endif /* CONFIG_WDC_ALI15X3 */ - - if (m5229_revision <= 0x20) { - return 0; - } else if ((m5229_revision < 0xC2) && -#ifndef CONFIG_WDC_ALI15X3 - ((chip_is_1543c_e && strstr(id->model, "WDC ")) || - (drive->media!=ide_disk))) { -#else /* CONFIG_WDC_ALI15X3 */ - (drive->media!=ide_disk)) { -#endif /* CONFIG_WDC_ALI15X3 */ - return 0; - } else { - return 1; - } -} - -/** - * ali15x3_ratemask - generate DMA mode list - * @drive: drive to compute against - * - * Generate a list of the available DMA modes for the drive. - * FIXME: this function contains lots of bogus masking we can dump - * - * Return the highest available mode (UDMA33, UDMA66, UDMA100,..) - */ - -static u8 ali15x3_ratemask (ide_drive_t *drive) -{ - u8 mode = 0, can_ultra = ali15x3_can_ultra(drive); - - if (m5229_revision > 0xC4 && can_ultra) { - mode = 4; - } else if (m5229_revision == 0xC4 && can_ultra) { - mode = 3; - } else if (m5229_revision >= 0xC2 && can_ultra) { - mode = 2; - } else if (can_ultra) { - return 1; - } else { - return 0; - } - - /* - * If the drive sees no suitable cable then UDMA 33 - * is the highest permitted mode - */ - - if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); - return mode; -} - -/** - * ali15x3_tune_chipset - set up chiset for new speed - * @drive: drive to configure for - * @xferspeed: desired speed - * - * Configure the hardware for the desired IDE transfer mode. - * We also do the needed drive configuration through helpers - */ - -static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed); - u8 speed1 = speed; - u8 unit = (drive->select.b.unit & 0x01); - u8 tmpbyte = 0x00; - int m5229_udma = (hwif->channel) ? 0x57 : 0x56; - - if (speed == XFER_UDMA_6) - speed1 = 0x47; - - if (speed < XFER_UDMA_0) { - u8 ultra_enable = (unit) ? 0x7f : 0xf7; - /* - * clear "ultra enable" bit - */ - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= ultra_enable; - pci_write_config_byte(dev, m5229_udma, tmpbyte); - - if (speed < XFER_SW_DMA_0) - ali15x3_tune_drive(drive, speed); - } else { - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= (0x0f << ((1-unit) << 2)); - /* - * enable ultra dma and set timing - */ - tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); - pci_write_config_byte(dev, m5229_udma, tmpbyte); - if (speed >= XFER_UDMA_3) { - pci_read_config_byte(dev, 0x4b, &tmpbyte); - tmpbyte |= 1; - pci_write_config_byte(dev, 0x4b, tmpbyte); - } - } - return (ide_config_drive_speed(drive, speed)); -} - - -/** - * config_chipset_for_dma - set up DMA mode - * @drive: drive to configure for - * - * Place a drive into DMA mode and tune the chipset for - * the selected speed. - * - * Returns true if DMA mode can be used - */ - -static int config_chipset_for_dma (ide_drive_t *drive) -{ - u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive)); - - if (!(speed)) - return 0; - - (void) ali15x3_tune_chipset(drive, speed); - return ide_dma_enable(drive); -} - -/** - * ali15x3_config_drive_for_dma - configure for DMA - * @drive: drive to configure - * - * Configure a drive for DMA operation. If DMA is not possible we - * drop the drive into PIO mode instead. - * - * FIXME: exactly what are we trying to return here - */ - -static int ali15x3_config_drive_for_dma(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - struct hd_driveid *id = drive->id; - - if ((m5229_revision<=0x20) && (drive->media!=ide_disk)) - return hwif->ide_dma_off_quietly(drive); - - drive->init_speed = 0; - - if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { - /* Consult the list of known "bad" drives */ - if (__ide_dma_bad_drive(drive)) - goto ata_pio; - if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) { - if (id->dma_ultra & hwif->ultra_mask) { - /* Force if Capable UltraDMA */ - int dma = config_chipset_for_dma(drive); - if ((id->field_valid & 2) && !dma) - goto try_dma_modes; - } - } else if (id->field_valid & 2) { -try_dma_modes: - if ((id->dma_mword & hwif->mwdma_mask) || - (id->dma_1word & hwif->swdma_mask)) { - /* Force if Capable regular DMA modes */ - if (!config_chipset_for_dma(drive)) - goto no_dma_set; - } - } else if (__ide_dma_good_drive(drive) && - (id->eide_dma_time < 150)) { - /* Consult the list of known "good" drives */ - if (!config_chipset_for_dma(drive)) - goto no_dma_set; - } else { - goto ata_pio; - } - } else { -ata_pio: - hwif->tuneproc(drive, 255); -no_dma_set: - return hwif->ide_dma_off_quietly(drive); - } - return hwif->ide_dma_on(drive); -} - -/** - * ali15x3_dma_setup - begin a DMA phase - * @drive: target device - * - * Returns 1 if the DMA cannot be performed, zero on success. - */ - -static int ali15x3_dma_setup(ide_drive_t *drive) -{ - if (m5229_revision < 0xC2 && drive->media != ide_disk) { - if (rq_data_dir(drive->hwif->hwgroup->rq)) - return 1; /* try PIO instead of DMA */ - } - return ide_dma_setup(drive); -} - -/** - * init_chipset_ali15x3 - Initialise an ALi IDE controller - * @dev: PCI device - * @name: Name of the controller - * - * This function initializes the ALI IDE controller and where - * appropriate also sets up the 1533 southbridge. - */ - -static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name) -{ - unsigned long flags; - u8 tmpbyte; - struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0)); - - pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); - - isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - -#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) - if (!ali_proc) { - ali_proc = 1; - bmide_dev = dev; - ide_pci_create_host_proc("ali", ali_get_info); - } -#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ - - local_irq_save(flags); - - if (m5229_revision < 0xC2) { - /* - * revision 0x20 (1543-E, 1543-F) - * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E) - * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7 - */ - pci_read_config_byte(dev, 0x4b, &tmpbyte); - /* - * clear bit 7 - */ - pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); - local_irq_restore(flags); - return 0; - } - - /* - * 1543C-B?, 1535, 1535D, 1553 - * Note 1: not all "motherboard" support this detection - * Note 2: if no udma 66 device, the detection may "error". - * but in this case, we will not set the device to - * ultra 66, the detection result is not important - */ - - /* - * enable "Cable Detection", m5229, 0x4b, bit3 - */ - pci_read_config_byte(dev, 0x4b, &tmpbyte); - pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08); - - /* - * We should only tune the 1533 enable if we are using an ALi - * North bridge. We might have no north found on some zany - * box without a device at 0:0.0. The ALi bridge will be at - * 0:0.0 so if we didn't find one we know what is cooking. - */ - if (north && north->vendor != PCI_VENDOR_ID_AL) { - local_irq_restore(flags); - return 0; - } - - if (m5229_revision < 0xC5 && isa_dev) - { - /* - * set south-bridge's enable bit, m1533, 0x79 - */ - - pci_read_config_byte(isa_dev, 0x79, &tmpbyte); - if (m5229_revision == 0xC2) { - /* - * 1543C-B0 (m1533, 0x79, bit 2) - */ - pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04); - } else if (m5229_revision >= 0xC3) { - /* - * 1553/1535 (m1533, 0x79, bit 1) - */ - pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); - } - } - local_irq_restore(flags); - return 0; -} - -/** - * ata66_ali15x3 - check for UDMA 66 support - * @hwif: IDE interface - * - * This checks if the controller and the cable are capable - * of UDMA66 transfers. It doesn't check the drives. - * But see note 2 below! - * - * FIXME: frobs bits that are not defined on newer ALi devicea - */ - -static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif) -{ - struct pci_dev *dev = hwif->pci_dev; - unsigned int ata66 = 0; - u8 cable_80_pin[2] = { 0, 0 }; - - unsigned long flags; - u8 tmpbyte; - - local_irq_save(flags); - - if (m5229_revision >= 0xC2) { - /* - * Ultra66 cable detection (from Host View) - * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin - */ - pci_read_config_byte(dev, 0x4a, &tmpbyte); - /* - * 0x4a, bit0 is 0 => primary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1; - /* - * 0x4a, bit1 is 0 => secondary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1; - /* - * Allow ata66 if cable of current channel has 80 pins - */ - ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0]; - } else { - /* - * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 - */ - pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); - chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; - } - - /* - * CD_ROM DMA on (m5229, 0x53, bit0) - * Enable this bit even if we want to use PIO - * PIO FIFO off (m5229, 0x53, bit1) - * The hardware will use 0x54h and 0x55h to control PIO FIFO - * (Not on later devices it seems) - * - * 0x53 changes meaning on later revs - we must no touch - * bit 1 on them. Need to check if 0x20 is the right break - */ - - pci_read_config_byte(dev, 0x53, &tmpbyte); - - if(m5229_revision <= 0x20) - tmpbyte = (tmpbyte & (~0x02)) | 0x01; - else - tmpbyte |= 0x01; - - pci_write_config_byte(dev, 0x53, tmpbyte); - - local_irq_restore(flags); - - return(ata66); -} - -/** - * init_hwif_common_ali15x3 - Set up ALI IDE hardware - * @hwif: IDE interface - * - * Initialize the IDE structure side of the ALi 15x3 driver. - */ - -static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) -{ - hwif->autodma = 0; - hwif->tuneproc = &ali15x3_tune_drive; - hwif->speedproc = &ali15x3_tune_chipset; - - /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ - hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; - - if (!hwif->dma_base) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - return; - } - - hwif->atapi_dma = 1; - - if (m5229_revision > 0x20) - hwif->ultra_mask = 0x7f; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - - if (m5229_revision >= 0x20) { - /* - * M1543C or newer for DMAing - */ - hwif->ide_dma_check = &ali15x3_config_drive_for_dma; - hwif->dma_setup = &ali15x3_dma_setup; - if (!noautodma) - hwif->autodma = 1; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_ali15x3(hwif); - } - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; -} - -/** - * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff - * @hwif: interface to configure - * - * Obtain the IRQ tables for an ALi based IDE solution on the PC - * class platforms. This part of the code isn't applicable to the - * Sparc systems - */ - -static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) -{ - u8 ideic, inmir; - s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, - 1, 11, 0, 12, 0, 14, 0, 15 }; - int irq = -1; - - if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - - if (isa_dev) { - /* - * read IDE interface control - */ - pci_read_config_byte(isa_dev, 0x58, &ideic); - - /* bit0, bit1 */ - ideic = ideic & 0x03; - - /* get IRQ for IDE Controller */ - if ((hwif->channel && ideic == 0x03) || - (!hwif->channel && !ideic)) { - /* - * get SIRQ1 routing table - */ - pci_read_config_byte(isa_dev, 0x44, &inmir); - inmir = inmir & 0x0f; - irq = irq_routing_table[inmir]; - } else if (hwif->channel && !(ideic & 0x01)) { - /* - * get SIRQ2 routing table - */ - pci_read_config_byte(isa_dev, 0x75, &inmir); - inmir = inmir & 0x0f; - irq = irq_routing_table[inmir]; - } - if(irq >= 0) - hwif->irq = irq; - } - - init_hwif_common_ali15x3(hwif); -} - -/** - * init_dma_ali15x3 - set up DMA on ALi15x3 - * @hwif: IDE interface - * @dmabase: DMA interface base PCI address - * - * Set up the DMA functionality on the ALi 15x3. For the ALi - * controllers this is generic so we can let the generic code do - * the actual work. - */ - -static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) -{ - if (m5229_revision < 0x20) - return; - if (!(hwif->channel)) - hwif->OUTB(hwif->INB(dmabase+2) & 0x60, dmabase+2); - ide_setup_dma(hwif, dmabase, 8); -} - -static ide_pci_device_t ali15x3_chipset __devinitdata = { - .name = "ALI15X3", - .init_chipset = init_chipset_ali15x3, - .init_hwif = init_hwif_ali15x3, - .init_dma = init_dma_ali15x3, - .channels = 2, - .autodma = AUTODMA, - .bootable = ON_BOARD, -}; - -/** - * alim15x3_init_one - set up an ALi15x3 IDE controller - * @dev: PCI device to set up - * - * Perform the actual set up for an ALi15x3 that has been found by the - * hot plug layer. - */ - -static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - static struct pci_device_id ati_rs100[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) }, - { }, - }; - - ide_pci_device_t *d = &ali15x3_chipset; - - if (pci_dev_present(ati_rs100)) - printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); - -#if defined(CONFIG_SPARC64) - d->init_hwif = init_hwif_common_ali15x3; -#endif /* CONFIG_SPARC64 */ - return ide_setup_pci_device(dev, d); -} - - -static struct pci_device_id alim15x3_pci_tbl[] = { - { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); - -static struct pci_driver driver = { - .name = "ALI15x3_IDE", - .id_table = alim15x3_pci_tbl, - .probe = alim15x3_init_one, -}; - -static int ali15x3_ide_init(void) -{ - return ide_pci_register_driver(&driver); -} - -module_init(ali15x3_ide_init); - -MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); -MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); -MODULE_LICENSE("GPL"); |