diff options
Diffstat (limited to 'drivers/ide/it821x.c')
| -rw-r--r-- | drivers/ide/it821x.c | 30 |
1 files changed, 16 insertions, 14 deletions
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 13b8153112e..f01ba4606be 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -61,6 +61,7 @@ #include <linux/types.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> @@ -228,18 +229,18 @@ static void it821x_clock_strategy(ide_drive_t *drive) /** * it821x_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Tune the host to the desired PIO mode taking into the consideration * the maximum PIO mode supported by the other device on the cable. */ -static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); ide_drive_t *pair = ide_get_pair_dev(drive); + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 unit = drive->dn & 1, set_pio = pio; /* Spec says 89 ref driver uses 88 */ @@ -252,7 +253,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) * on the cable. */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; /* trim PIO to the slowest of the master/slave */ if (pair_pio < set_pio) set_pio = pair_pio; @@ -393,14 +394,16 @@ static int it821x_dma_end(ide_drive_t *drive) /** * it821x_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the ITE chipset for the desired DMA mode. */ -static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 speed = drive->dma_mode; + /* * MWDMA tuning is really hard because our MWDMA and PIO * timings are kept in the same place. We can switch in the @@ -508,12 +511,11 @@ static void it821x_quirkproc(ide_drive_t *drive) static struct ide_dma_ops it821x_pass_through_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = it821x_dma_start, .dma_end = it821x_dma_end, .dma_test_irq = ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = ide_dma_lost_irq, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; @@ -526,7 +528,7 @@ static struct ide_dma_ops it821x_pass_through_dma_ops = { * ide DMA handlers appropriately */ -static void __devinit init_hwif_it821x(ide_hwif_t *hwif) +static void init_hwif_it821x(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -603,7 +605,7 @@ static void it8212_disable_raid(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); } -static unsigned int init_chipset_it821x(struct pci_dev *dev) +static int init_chipset_it821x(struct pci_dev *dev) { u8 conf; static char *mode[2] = { "pass through", "smart" }; @@ -628,7 +630,7 @@ static const struct ide_port_ops it821x_port_ops = { .cable_detect = it821x_cable_detect, }; -static const struct ide_port_info it821x_chipset __devinitdata = { +static const struct ide_port_info it821x_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_it821x, .init_hwif = init_hwif_it821x, @@ -645,7 +647,7 @@ static const struct ide_port_info it821x_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct it821x_dev *itdevs; int rc; @@ -665,7 +667,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic return rc; } -static void __devexit it821x_remove(struct pci_dev *dev) +static void it821x_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct it821x_dev *itdevs = host->host_priv; @@ -687,7 +689,7 @@ static struct pci_driver it821x_pci_driver = { .name = "ITE821x IDE", .id_table = it821x_pci_tbl, .probe = it821x_init_one, - .remove = __devexit_p(it821x_remove), + .remove = it821x_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; |