diff options
Diffstat (limited to 'drivers/ide/ide-taskfile.c')
| -rw-r--r-- | drivers/ide/ide-taskfile.c | 1096 |
1 files changed, 457 insertions, 639 deletions
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 9834dce4e20..dabb88b1cbe 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -1,474 +1,437 @@ /* - * linux/drivers/ide/ide-taskfile.c Version 0.38 March 05, 2003 - * - * Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org> - * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2001-2002 Klaus Smolin + * Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org> + * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2001-2002 Klaus Smolin * IBM Storage Technology Division - * Copyright (C) 2003-2004 Bartlomiej Zolnierkiewicz + * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz * * The big the bad and the ugly. - * - * Problems to be fixed because of BH interface or the lack therefore. - * - * Fill me in stupid !!! - * - * HOST: - * General refers to the Controller and Driver "pair". - * DATA HANDLER: - * Under the context of Linux it generally refers to an interrupt handler. - * However, it correctly describes the 'HOST' - * DATA BLOCK: - * The amount of data needed to be transfered as predefined in the - * setup of the device. - * STORAGE ATOMIC: - * The 'DATA BLOCK' associated to the 'DATA HANDLER', and can be as - * small as a single sector or as large as the entire command block - * request. */ -#include <linux/config.h> -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> +#include <linux/export.h> +#include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/major.h> #include <linux/errno.h> -#include <linux/genhd.h> -#include <linux/blkpg.h> #include <linux/slab.h> -#include <linux/pci.h> #include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/bitops.h> +#include <linux/scatterlist.h> +#include <linux/uaccess.h> -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> #include <asm/io.h> -static void ata_bswap_data (void *buffer, int wcount) +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd) { - u16 *p = buffer; + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + + /* Be sure we're looking at the low order bytes */ + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf); + + if (cmd->tf_flags & IDE_TFLAG_LBA48) { + tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - while (wcount--) { - *p = *p << 8 | *p >> 8; p++; - *p = *p << 8 | *p >> 8; p++; + tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob); } } -static void taskfile_input_data(ide_drive_t *drive, void *buffer, u32 wcount) +void ide_tf_dump(const char *s, struct ide_cmd *cmd) { - HWIF(drive)->ata_input_data(drive, buffer, wcount); - if (drive->bswap) - ata_bswap_data(buffer, wcount); +#ifdef DEBUG + printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " + "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", + s, cmd->tf.feature, cmd->tf.nsect, + cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah, + cmd->tf.device, cmd->tf.command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n", + s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah); +#endif } -static void taskfile_output_data(ide_drive_t *drive, void *buffer, u32 wcount) +int taskfile_lib_get_identify(ide_drive_t *drive, u8 *buf) { - if (drive->bswap) { - ata_bswap_data(buffer, wcount); - HWIF(drive)->ata_output_data(drive, buffer, wcount); - ata_bswap_data(buffer, wcount); - } else { - HWIF(drive)->ata_output_data(drive, buffer, wcount); - } -} + struct ide_cmd cmd; -int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) -{ - ide_task_t args; - memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; + memset(&cmd, 0, sizeof(cmd)); + cmd.tf.nsect = 0x01; if (drive->media == ide_disk) - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_IDENTIFY; + cmd.tf.command = ATA_CMD_ID_ATA; else - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_PIDENTIFY; - args.command_type = IDE_DRIVE_TASK_IN; - args.data_phase = TASKFILE_IN; - args.handler = &task_in_intr; - return ide_raw_taskfile(drive, &args, buf); + cmd.tf.command = ATA_CMD_ID_ATAPI; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_PIO; + + return ide_raw_taskfile(drive, &cmd, buf, 1); } -ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) +static ide_startstop_t task_no_data_intr(ide_drive_t *); +static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct ide_cmd *); +static ide_startstop_t task_pio_intr(ide_drive_t *); + +ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) { - ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; - u8 HIHI = (drive->addressing == 1) ? 0xE0 : 0xEF; - - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) { - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - } - SELECT_MASK(drive, 0); - - if (drive->addressing == 1) { - hwif->OUTB(hobfile->feature, IDE_FEATURE_REG); - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); + ide_hwif_t *hwif = drive->hwif; + struct ide_cmd *cmd = &hwif->cmd; + struct ide_taskfile *tf = &cmd->tf; + ide_handler_t *handler = NULL; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + const struct ide_dma_ops *dma_ops = hwif->dma_ops; + + if (orig_cmd->protocol == ATA_PROT_PIO && + (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) && + drive->mult_count == 0) { + pr_err("%s: multimode not set!\n", drive->name); + return ide_stopped; } - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); + if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED) + orig_cmd->ftf_flags |= IDE_FTFLAG_SET_IN_FLAGS; - hwif->OUTB((taskfile->device_head & HIHI) | drive->select.all, IDE_SELECT_REG); + memcpy(cmd, orig_cmd, sizeof(*cmd)); - if (task->handler != NULL) { - if (task->prehandler != NULL) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); - } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); - return ide_started; - } + if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { + ide_tf_dump(drive->name, cmd); + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (!drive->using_dma) - return ide_stopped; + if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) { + u8 data[2] = { cmd->tf.data, cmd->hob.data }; - switch (taskfile->command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, taskfile->command); - hwif->dma_start(drive); - return ide_started; - } - break; - default: - if (task->handler == NULL) - return ide_stopped; - } + tp_ops->output_data(drive, cmd, data, 2); + } - return ide_stopped; -} + if (cmd->valid.out.tf & IDE_VALID_DEVICE) { + u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? + 0xE0 : 0xEF; -/* - * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. - */ -ide_startstop_t set_multmode_intr (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + if (!(cmd->ftf_flags & IDE_FTFLAG_FLAGGED)) + cmd->tf.device &= HIHI; + cmd->tf.device |= drive->select; + } - if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { - drive->mult_count = drive->mult_req; - } else { - drive->mult_req = drive->mult_count = 0; - drive->special.b.recalibrate = 1; - (void) ide_dump_status(drive, "set_multmode", stat); + tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob); + tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf); + } + + switch (cmd->protocol) { + case ATA_PROT_PIO: + if (cmd->tf_flags & IDE_TFLAG_WRITE) { + tp_ops->exec_command(hwif, tf->command); + ndelay(400); /* FIXME */ + return pre_task_out_intr(drive, cmd); + } + handler = task_pio_intr; + /* fall-through */ + case ATA_PROT_NODATA: + if (handler == NULL) + handler = task_no_data_intr; + ide_execute_command(drive, cmd, handler, WAIT_WORSTCASE); + return ide_started; + case ATA_PROT_DMA: + if (ide_dma_prepare(drive, cmd)) + return ide_stopped; + hwif->expiry = dma_ops->dma_timer_expiry; + ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD); + dma_ops->dma_start(drive); + default: + return ide_started; } - return ide_stopped; } +EXPORT_SYMBOL_GPL(do_rw_taskfile); -/* - * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. - */ -ide_startstop_t set_geometry_intr (ide_drive_t *drive) +static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - int retries = 5; + ide_hwif_t *hwif = drive->hwif; + struct ide_cmd *cmd = &hwif->cmd; + struct ide_taskfile *tf = &cmd->tf; + int custom = (cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0; + int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1; u8 stat; - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) - udelay(10); - - if (OK_STAT(stat, READY_STAT, BAD_STAT)) - return ide_stopped; - - if (stat & (ERR_STAT|DRQ_STAT)) - return ide_error(drive, "set_geometry_intr", stat); + local_irq_enable_in_hardirq(); - if (HWGROUP(drive)->handler != NULL) - BUG(); - ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); - return ide_started; -} + while (1) { + stat = hwif->tp_ops->read_status(hwif); + if ((stat & ATA_BUSY) == 0 || retries-- == 0) + break; + udelay(10); + }; -/* - * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. - */ -ide_startstop_t recal_intr (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { + if (custom && tf->command == ATA_CMD_SET_MULTI) { + drive->mult_req = drive->mult_count = 0; + drive->special_flags |= IDE_SFLAG_RECALIBRATE; + (void)ide_dump_status(drive, __func__, stat); + return ide_stopped; + } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) { + if ((stat & (ATA_ERR | ATA_DRQ)) == 0) { + ide_set_handler(drive, &task_no_data_intr, + WAIT_WORSTCASE); + return ide_started; + } + } + return ide_error(drive, "task_no_data_intr", stat); + } - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), READY_STAT, BAD_STAT)) - return ide_error(drive, "recal_intr", stat); - return ide_stopped; -} + if (custom && tf->command == ATA_CMD_SET_MULTI) + drive->mult_count = drive->mult_req; -/* - * Handler for commands without a data phase - */ -ide_startstop_t task_no_data_intr (ide_drive_t *drive) -{ - ide_task_t *args = HWGROUP(drive)->rq->special; - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + if (custom == 0 || tf->command == ATA_CMD_IDLEIMMEDIATE || + tf->command == ATA_CMD_CHK_POWER) { + struct request *rq = hwif->rq; - local_irq_enable(); - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { - return ide_error(drive, "task_no_data_intr", stat); - /* calls ide_end_drive_cmd */ + if (blk_pm_request(rq)) + ide_complete_pm_rq(drive, rq); + else + ide_finish_cmd(drive, cmd, stat); } - if (args) - ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG)); return ide_stopped; } -EXPORT_SYMBOL(task_no_data_intr); - static u8 wait_drive_not_busy(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - int retries = 100; + ide_hwif_t *hwif = drive->hwif; + int retries; u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms - * (drive_cmd_intr() waits that long). + * Last sector was transferred, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) - udelay(10); + for (retries = 0; retries < 1000; retries++) { + stat = hwif->tp_ops->read_status(hwif); + + if (stat & ATA_BUSY) + udelay(10); + else + break; + } - if (!retries) - printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); + if (stat & ATA_BUSY) + pr_err("%s: drive still BUSY!\n", drive->name); return stat; } -static void ide_pio_sector(ide_drive_t *drive, unsigned int write) +void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, + unsigned int write, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + struct scatterlist *cursg = cmd->cursg; + unsigned long uninitialized_var(flags); struct page *page; -#ifdef CONFIG_HIGHMEM - unsigned long flags; -#endif unsigned int offset; u8 *buf; - page = sg[hwif->cursg].page; - offset = sg[hwif->cursg].offset + hwif->cursg_ofs * SECTOR_SIZE; + cursg = cmd->cursg; + if (cursg == NULL) + cursg = cmd->cursg = sg; - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; + while (len) { + unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs); + int page_is_high; -#ifdef CONFIG_HIGHMEM - local_irq_save(flags); -#endif - buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; + page = sg_page(cursg); + offset = cursg->offset + cmd->cursg_ofs; - hwif->nleft--; - hwif->cursg_ofs++; + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; - if ((hwif->cursg_ofs * SECTOR_SIZE) == sg[hwif->cursg].length) { - hwif->cursg++; - hwif->cursg_ofs = 0; - } + nr_bytes = min_t(unsigned, nr_bytes, (PAGE_SIZE - offset)); - /* do the actual data transfer */ - if (write) - taskfile_output_data(drive, buf, SECTOR_WORDS); - else - taskfile_input_data(drive, buf, SECTOR_WORDS); + page_is_high = PageHighMem(page); + if (page_is_high) + local_irq_save(flags); - kunmap_atomic(buf, KM_BIO_SRC_IRQ); -#ifdef CONFIG_HIGHMEM - local_irq_restore(flags); -#endif -} + buf = kmap_atomic(page) + offset; -static void ide_pio_multi(ide_drive_t *drive, unsigned int write) -{ - unsigned int nsect; + cmd->nleft -= nr_bytes; + cmd->cursg_ofs += nr_bytes; - nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); - while (nsect--) - ide_pio_sector(drive, write); -} + if (cmd->cursg_ofs == cursg->length) { + cursg = cmd->cursg = sg_next(cmd->cursg); + cmd->cursg_ofs = 0; + } -static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, - unsigned int write) -{ - if (rq->bio) /* fs request */ - rq->errors = 0; + /* do the actual data transfer */ + if (write) + hwif->tp_ops->output_data(drive, cmd, buf, nr_bytes); + else + hwif->tp_ops->input_data(drive, cmd, buf, nr_bytes); - switch (drive->hwif->data_phase) { - case TASKFILE_MULTI_IN: - case TASKFILE_MULTI_OUT: - ide_pio_multi(drive, write); - break; - default: - ide_pio_sector(drive, write); - break; + kunmap_atomic(buf); + + if (page_is_high) + local_irq_restore(flags); + + len -= nr_bytes; } } +EXPORT_SYMBOL_GPL(ide_pio_bytes); -static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, - const char *s, u8 stat) +static void ide_pio_datablock(ide_drive_t *drive, struct ide_cmd *cmd, + unsigned int write) { - if (rq->bio) { - ide_hwif_t *hwif = drive->hwif; - int sectors = hwif->nsect - hwif->nleft; - - switch (hwif->data_phase) { - case TASKFILE_IN: - if (hwif->nleft) - break; - /* fall through */ - case TASKFILE_OUT: - sectors--; - break; - case TASKFILE_MULTI_IN: - if (hwif->nleft) - break; - /* fall through */ - case TASKFILE_MULTI_OUT: - sectors -= drive->mult_count; - default: - break; - } + unsigned int nr_bytes; - if (sectors > 0) { - ide_driver_t *drv; + u8 saved_io_32bit = drive->io_32bit; - drv = *(ide_driver_t **)rq->rq_disk->private_data; - drv->end_request(drive, 1, sectors); - } - } - return ide_error(drive, s, stat); + if (cmd->tf_flags & IDE_TFLAG_FS) + cmd->rq->errors = 0; + + if (cmd->tf_flags & IDE_TFLAG_IO_16BIT) + drive->io_32bit = 0; + + touch_softlockup_watchdog(); + + if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) + nr_bytes = min_t(unsigned, cmd->nleft, drive->mult_count << 9); + else + nr_bytes = SECTOR_SIZE; + + ide_pio_bytes(drive, cmd, write, nr_bytes); + + drive->io_32bit = saved_io_32bit; } -static void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) +static void ide_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) { - if (rq->flags & REQ_DRIVE_TASKFILE) { - ide_task_t *task = rq->special; - - if (task->tf_out_flags.all) { - u8 err = drive->hwif->INB(IDE_ERROR_REG); - ide_end_drive_cmd(drive, stat, err); - return; + if (cmd->tf_flags & IDE_TFLAG_FS) { + int nr_bytes = cmd->nbytes - cmd->nleft; + + if (cmd->protocol == ATA_PROT_PIO && + ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) { + if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) + nr_bytes -= drive->mult_count << 9; + else + nr_bytes -= SECTOR_SIZE; } - } - ide_end_request(drive, 1, rq->hard_nr_sectors); + if (nr_bytes > 0) + ide_complete_rq(drive, 0, nr_bytes); + } } -/* - * Handler for command with PIO data-in phase (Read/Read Multiple). - */ -ide_startstop_t task_in_intr (ide_drive_t *drive) +void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat) { - ide_hwif_t *hwif = drive->hwif; - struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); - - /* new way for dealing with premature shared PCI interrupts */ - if (!OK_STAT(stat, DATA_READY, BAD_R_STAT)) { - if (stat & (ERR_STAT | DRQ_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); - /* No data yet, so wait for another IRQ. */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - return ide_started; - } + struct request *rq = drive->hwif->rq; + u8 err = ide_read_error(drive), nsect = cmd->tf.nsect; + u8 set_xfer = !!(cmd->tf_flags & IDE_TFLAG_SET_XFER); - ide_pio_datablock(drive, rq, 0); + ide_complete_cmd(drive, cmd, stat, err); + rq->errors = err; - /* If it was the last datablock check status and finish transfer. */ - if (!hwif->nleft) { - stat = wait_drive_not_busy(drive); - if (!OK_STAT(stat, 0, BAD_R_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); - task_end_request(drive, rq, stat); - return ide_stopped; + if (err == 0 && set_xfer) { + ide_set_xfer_rate(drive, nsect); + ide_driveid_update(drive); } - /* Still data left to transfer. */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - - return ide_started; + ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq)); } -EXPORT_SYMBOL(task_in_intr); /* - * Handler for command with PIO data-out phase (Write/Write Multiple). + * Handler for command with PIO data phase. */ -static ide_startstop_t task_out_intr (ide_drive_t *drive) +static ide_startstop_t task_pio_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); - - if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) - return task_error(drive, rq, __FUNCTION__, stat); - - /* Deal with unexpected ATA data phase. */ - if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) - return task_error(drive, rq, __FUNCTION__, stat); + struct ide_cmd *cmd = &drive->hwif->cmd; + u8 stat = hwif->tp_ops->read_status(hwif); + u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); + + if (write == 0) { + /* Error? */ + if (stat & ATA_ERR) + goto out_err; + + /* Didn't want any data? Odd. */ + if ((stat & ATA_DRQ) == 0) { + /* Command all done? */ + if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) + goto out_end; + + /* Assume it was a spurious irq */ + goto out_wait; + } + } else { + if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) + goto out_err; - if (!hwif->nleft) { - task_end_request(drive, rq, stat); - return ide_stopped; + /* Deal with unexpected ATA data phase. */ + if (((stat & ATA_DRQ) == 0) ^ (cmd->nleft == 0)) + goto out_err; } + if (write && cmd->nleft == 0) + goto out_end; + /* Still data left to transfer. */ - ide_pio_datablock(drive, rq, 1); - ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); + ide_pio_datablock(drive, cmd, write); + /* Are we done? Check status and finish transfer. */ + if (write == 0 && cmd->nleft == 0) { + stat = wait_drive_not_busy(drive); + if (!OK_STAT(stat, 0, BAD_STAT)) + goto out_err; + + goto out_end; + } +out_wait: + /* Still data left to transfer. */ + ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); return ide_started; +out_end: + if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) + ide_finish_cmd(drive, cmd, stat); + else + ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9); + return ide_stopped; +out_err: + ide_error_cmd(drive, cmd); + return ide_error(drive, __func__, stat); } -ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) +static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, + struct ide_cmd *cmd) { ide_startstop_t startstop; - if (ide_wait_stat(&startstop, drive, DATA_READY, + if (ide_wait_stat(&startstop, drive, ATA_DRQ, drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", - drive->name, - drive->hwif->data_phase ? "MULT" : "", - drive->addressing ? "_EXT" : ""); + pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name, + (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "", + (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : ""); return startstop; } - if (!drive->unmask) + if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0) local_irq_disable(); - ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); - ide_pio_datablock(drive, rq, 1); + ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); + + ide_pio_datablock(drive, cmd, 1); return ide_started; } -EXPORT_SYMBOL(pre_task_out_intr); -static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long data_size, u8 *buf) +int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, + u16 nsect) { - struct request rq; + struct request *rq; + int error; + int rw = !(cmd->tf_flags & IDE_TFLAG_WRITE) ? READ : WRITE; - memset(&rq, 0, sizeof(rq)); - rq.flags = REQ_DRIVE_TASKFILE; - rq.buffer = buf; + rq = blk_get_request(drive->queue, rw, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; /* * (ks) We transfer currently only whole sectors. @@ -476,63 +439,58 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - if (args->command_type != IDE_DRIVE_TASK_NO_DATA) { - if (data_size == 0) - rq.nr_sectors = (args->hobRegister[IDE_NSECTOR_OFFSET] << 8) | args->tfRegister[IDE_NSECTOR_OFFSET]; - else - rq.nr_sectors = data_size / SECTOR_SIZE; - - if (!rq.nr_sectors) { - printk(KERN_ERR "%s: in/out command without data\n", - drive->name); - return -EFAULT; - } + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } - rq.hard_nr_sectors = rq.nr_sectors; - rq.hard_cur_sectors = rq.current_nr_sectors = rq.nr_sectors; + rq->special = cmd; + cmd->rq = rq; - if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE) - rq.flags |= REQ_RW; - } + error = blk_execute_rq(drive->queue, NULL, rq, 0); - rq.special = args; - args->rq = &rq; - return ide_do_drive_cmd(drive, &rq, ide_wait); +put_req: + blk_put_request(rq); + return error; } +EXPORT_SYMBOL(ide_raw_taskfile); -int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf) +int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd) { - return ide_diag_taskfile(drive, args, 0, buf); -} + cmd->protocol = ATA_PROT_NODATA; -EXPORT_SYMBOL(ide_raw_taskfile); + return ide_raw_taskfile(drive, cmd, NULL, 0); +} +EXPORT_SYMBOL_GPL(ide_no_data_taskfile); -int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) +#ifdef CONFIG_IDE_TASK_IOCTL +int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) { ide_task_request_t *req_task; - ide_task_t args; + struct ide_cmd cmd; u8 *outbuf = NULL; u8 *inbuf = NULL; - task_ioreg_t *argsptr = args.tfRegister; - task_ioreg_t *hobsptr = args.hobRegister; + u8 *data_buf = NULL; int err = 0; int tasksize = sizeof(struct ide_task_request_s); - int taskin = 0; - int taskout = 0; - u8 io_32bit = drive->io_32bit; + unsigned int taskin = 0; + unsigned int taskout = 0; + u16 nsect = 0; char __user *buf = (char __user *)arg; -// printk("IDE Taskfile ...\n"); + req_task = memdup_user(buf, tasksize); + if (IS_ERR(req_task)) + return PTR_ERR(req_task); - req_task = kzalloc(tasksize, GFP_KERNEL); - if (req_task == NULL) return -ENOMEM; - if (copy_from_user(req_task, buf, tasksize)) { - kfree(req_task); - return -EFAULT; - } + taskout = req_task->out_size; + taskin = req_task->in_size; - taskout = (int) req_task->out_size; - taskin = (int) req_task->in_size; + if (taskin > 65536 || taskout > 65536) { + err = -EINVAL; + goto abort; + } if (taskout) { int outtotal = tasksize; @@ -560,67 +518,133 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } } - memset(&args, 0, sizeof(ide_task_t)); - memcpy(argsptr, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(hobsptr, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE); + memset(&cmd, 0, sizeof(cmd)); - args.tf_in_flags = req_task->in_flags; - args.tf_out_flags = req_task->out_flags; - args.data_phase = req_task->data_phase; - args.command_type = req_task->req_cmd; + memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - drive->io_32bit = 0; - switch(req_task->data_phase) { - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - err = ide_diag_taskfile(drive, &args, taskout, outbuf); - break; - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - err = ide_diag_taskfile(drive, &args, taskin, inbuf); - break; - case TASKFILE_MULTI_OUT: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Write " \ - "multcount is not set\n", - drive->name, __FUNCTION__); - err = -EPERM; - goto abort; - } - /* fall through */ - case TASKFILE_OUT: - args.prehandler = &pre_task_out_intr; - args.handler = &task_out_intr; - err = ide_diag_taskfile(drive, &args, taskout, outbuf); - break; - case TASKFILE_MULTI_IN: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Read failure " \ - "multcount is not set\n", - drive->name, __FUNCTION__); - err = -EPERM; - goto abort; - } - /* fall through */ - case TASKFILE_IN: - args.handler = &task_in_intr; - err = ide_diag_taskfile(drive, &args, taskin, inbuf); - break; - case TASKFILE_NO_DATA: - args.handler = &task_no_data_intr; - err = ide_diag_taskfile(drive, &args, 0, NULL); - break; - default: + cmd.valid.out.tf = IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; + cmd.tf_flags = IDE_TFLAG_IO_16BIT; + + if (drive->dev_flags & IDE_DFLAG_LBA48) { + cmd.tf_flags |= IDE_TFLAG_LBA48; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + } + + if (req_task->out_flags.all) { + cmd.ftf_flags |= IDE_FTFLAG_FLAGGED; + + if (req_task->out_flags.b.data) + cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA; + + if (req_task->out_flags.b.nsector_hob) + cmd.valid.out.hob |= IDE_VALID_NSECT; + if (req_task->out_flags.b.sector_hob) + cmd.valid.out.hob |= IDE_VALID_LBAL; + if (req_task->out_flags.b.lcyl_hob) + cmd.valid.out.hob |= IDE_VALID_LBAM; + if (req_task->out_flags.b.hcyl_hob) + cmd.valid.out.hob |= IDE_VALID_LBAH; + + if (req_task->out_flags.b.error_feature) + cmd.valid.out.tf |= IDE_VALID_FEATURE; + if (req_task->out_flags.b.nsector) + cmd.valid.out.tf |= IDE_VALID_NSECT; + if (req_task->out_flags.b.sector) + cmd.valid.out.tf |= IDE_VALID_LBAL; + if (req_task->out_flags.b.lcyl) + cmd.valid.out.tf |= IDE_VALID_LBAM; + if (req_task->out_flags.b.hcyl) + cmd.valid.out.tf |= IDE_VALID_LBAH; + } else { + cmd.valid.out.tf |= IDE_VALID_OUT_TF; + if (cmd.tf_flags & IDE_TFLAG_LBA48) + cmd.valid.out.hob |= IDE_VALID_OUT_HOB; + } + + if (req_task->in_flags.b.data) + cmd.ftf_flags |= IDE_FTFLAG_IN_DATA; + + if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) { + /* fixup data phase if needed */ + if (req_task->data_phase == TASKFILE_IN_DMAQ || + req_task->data_phase == TASKFILE_IN_DMA) + cmd.tf_flags |= IDE_TFLAG_WRITE; + } + + cmd.protocol = ATA_PROT_DMA; + + switch (req_task->data_phase) { + case TASKFILE_MULTI_OUT: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Write multcount is not set\n", + drive->name, __func__); + err = -EPERM; + goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_OUT: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_OUT_DMAQ: + case TASKFILE_OUT_DMA: + cmd.tf_flags |= IDE_TFLAG_WRITE; + nsect = taskout / SECTOR_SIZE; + data_buf = outbuf; + break; + case TASKFILE_MULTI_IN: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Read multcount is not set\n", + drive->name, __func__); + err = -EPERM; + goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_IN: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_IN_DMAQ: + case TASKFILE_IN_DMA: + nsect = taskin / SECTOR_SIZE; + data_buf = inbuf; + break; + case TASKFILE_NO_DATA: + cmd.protocol = ATA_PROT_NODATA; + break; + default: + err = -EFAULT; + goto abort; + } + + if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) + nsect = 0; + else if (!nsect) { + nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect; + + if (!nsect) { + pr_err("%s: in/out command without data\n", + drive->name); err = -EFAULT; goto abort; + } } - memcpy(req_task->io_ports, &(args.tfRegister), HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(req_task->hob_ports, &(args.hobRegister), HDIO_DRIVE_HOB_HDR_SIZE); - req_task->in_flags = args.tf_in_flags; - req_task->out_flags = args.tf_out_flags; + err = ide_raw_taskfile(drive, &cmd, data_buf, nsect); + + memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE); + + if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) && + req_task->in_flags.all == 0) { + req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; + if (drive->dev_flags & IDE_DFLAG_LBA48) + req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); + } if (copy_to_user(buf, req_task, tasksize)) { err = -EFAULT; @@ -645,212 +669,6 @@ abort: kfree(outbuf); kfree(inbuf); -// printk("IDE Taskfile ioctl ended. rc = %i\n", err); - - drive->io_32bit = io_32bit; - - return err; -} - -int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf) -{ - struct request rq; - u8 buffer[4]; - - if (!buf) - buf = buffer; - memset(buf, 0, 4 + SECTOR_WORDS * 4 * sectors); - ide_init_drive_cmd(&rq); - rq.buffer = buf; - *buf++ = cmd; - *buf++ = nsect; - *buf++ = feature; - *buf++ = sectors; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - -/* - * FIXME : this needs to map into at taskfile. <andre@linux-ide.org> - */ -int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) -{ - int err = 0; - u8 args[4], *argbuf = args; - u8 xfer_rate = 0; - int argsize = 4; - ide_task_t tfargs; - - if (NULL == (void *) arg) { - struct request rq; - ide_init_drive_cmd(&rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); - } - - if (copy_from_user(args, (void __user *)arg, 4)) - return -EFAULT; - - memset(&tfargs, 0, sizeof(ide_task_t)); - tfargs.tfRegister[IDE_FEATURE_OFFSET] = args[2]; - tfargs.tfRegister[IDE_NSECTOR_OFFSET] = args[3]; - tfargs.tfRegister[IDE_SECTOR_OFFSET] = args[1]; - tfargs.tfRegister[IDE_LCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_HCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_SELECT_OFFSET] = 0x00; - tfargs.tfRegister[IDE_COMMAND_OFFSET] = args[0]; - - if (args[3]) { - argsize = 4 + (SECTOR_WORDS * 4 * args[3]); - argbuf = kzalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) - return -ENOMEM; - } - if (set_transfer(drive, &tfargs)) { - xfer_rate = args[1]; - if (ide_ata66_check(drive, &tfargs)) - goto abort; - } - - err = ide_wait_cmd(drive, args[0], args[1], args[2], args[3], argbuf); - - if (!err && xfer_rate) { - /* active-retuning-calls future */ - ide_set_xfer_rate(drive, xfer_rate); - ide_driveid_update(drive); - } -abort: - if (copy_to_user((void __user *)arg, argbuf, argsize)) - err = -EFAULT; - if (argsize > 4) - kfree(argbuf); - return err; -} - -static int ide_wait_cmd_task(ide_drive_t *drive, u8 *buf) -{ - struct request rq; - - ide_init_drive_cmd(&rq); - rq.flags = REQ_DRIVE_TASK; - rq.buffer = buf; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - -/* - * FIXME : this needs to map into at taskfile. <andre@linux-ide.org> - */ -int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) -{ - void __user *p = (void __user *)arg; - int err = 0; - u8 args[7], *argbuf = args; - int argsize = 7; - - if (copy_from_user(args, p, 7)) - return -EFAULT; - err = ide_wait_cmd_task(drive, argbuf); - if (copy_to_user(p, argbuf, argsize)) - err = -EFAULT; return err; } - -/* - * NOTICE: This is additions from IBM to provide a discrete interface, - * for selective taskregister access operations. Nice JOB Klaus!!! - * Glad to be able to work and co-develop this with you and IBM. - */ -ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; - - if (task->data_phase == TASKFILE_MULTI_IN || - task->data_phase == TASKFILE_MULTI_OUT) { - if (!drive->mult_count) { - printk(KERN_ERR "%s: multimode not set!\n", drive->name); - return ide_stopped; - } - } - - /* - * (ks) Check taskfile in flags. - * If set, then execute as it is defined. - * If not set, then define default settings. - * The default values are: - * read all taskfile registers (except data) - * read the hob registers (sector, nsector, lcyl, hcyl) - */ - if (task->tf_in_flags.all == 0) { - task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; - if (drive->addressing == 1) - task->tf_in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); - } - - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - SELECT_MASK(drive, 0); - - if (task->tf_out_flags.b.data) { - u16 data = taskfile->data + (hobfile->data << 8); - hwif->OUTW(data, IDE_DATA_REG); - } - - /* (ks) send hob registers first */ - if (task->tf_out_flags.b.nsector_hob) - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); - if (task->tf_out_flags.b.sector_hob) - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl_hob) - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl_hob) - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); - - /* (ks) Send now the standard registers */ - if (task->tf_out_flags.b.error_feature) - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); - /* refers to number of sectors to transfer */ - if (task->tf_out_flags.b.nsector) - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); - /* refers to sector offset or start sector */ - if (task->tf_out_flags.b.sector) - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl) - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl) - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); - - /* - * (ks) In the flagged taskfile approch, we will use all specified - * registers and the register value will not be changed, except the - * select bit (master/slave) in the drive_head register. We must make - * sure that the desired drive is selected. - */ - hwif->OUTB(taskfile->device_head | drive->select.all, IDE_SELECT_REG); - switch(task->data_phase) { - - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - hwif->dma_setup(drive); - hwif->dma_exec_cmd(drive, taskfile->command); - hwif->dma_start(drive); - break; - - default: - if (task->handler == NULL) - return ide_stopped; - - /* Issue the command */ - if (task->prehandler) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); - } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); - } - - return ide_started; -} +#endif |
