diff options
Diffstat (limited to 'drivers/ide/ide-lib.c')
| -rw-r--r-- | drivers/ide/ide-lib.c | 643 |
1 files changed, 113 insertions, 530 deletions
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index d97390c0543..d9c9829c8b2 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,359 +1,11 @@ -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> +#include <linux/export.h> #include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/errno.h> -#include <linux/genhd.h> -#include <linux/blkpg.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> - -/* - * IDE library routines. These are plug in code that most - * drivers can use but occasionally may be weird enough - * to want to do their own thing with - * - * Add common non I/O op stuff here. Make sure it has proper - * kernel-doc function headers or your patch will be rejected - */ - - -/** - * ide_xfer_verbose - return IDE mode names - * @xfer_rate: rate to name - * - * Returns a constant string giving the name of the mode - * requested. - */ - -char *ide_xfer_verbose (u8 xfer_rate) -{ - switch(xfer_rate) { - case XFER_UDMA_7: return("UDMA 7"); - case XFER_UDMA_6: return("UDMA 6"); - case XFER_UDMA_5: return("UDMA 5"); - case XFER_UDMA_4: return("UDMA 4"); - case XFER_UDMA_3: return("UDMA 3"); - case XFER_UDMA_2: return("UDMA 2"); - case XFER_UDMA_1: return("UDMA 1"); - case XFER_UDMA_0: return("UDMA 0"); - case XFER_MW_DMA_2: return("MW DMA 2"); - case XFER_MW_DMA_1: return("MW DMA 1"); - case XFER_MW_DMA_0: return("MW DMA 0"); - case XFER_SW_DMA_2: return("SW DMA 2"); - case XFER_SW_DMA_1: return("SW DMA 1"); - case XFER_SW_DMA_0: return("SW DMA 0"); - case XFER_PIO_4: return("PIO 4"); - case XFER_PIO_3: return("PIO 3"); - case XFER_PIO_2: return("PIO 2"); - case XFER_PIO_1: return("PIO 1"); - case XFER_PIO_0: return("PIO 0"); - case XFER_PIO_SLOW: return("PIO SLOW"); - default: return("XFER ERROR"); - } -} - -EXPORT_SYMBOL(ide_xfer_verbose); - -/** - * ide_rate_filter - filter transfer mode - * @drive: IDE device - * @speed: desired speed - * - * Given the available transfer modes this function returns - * the best available speed at or below the speed requested. - * - * TODO: check device PIO capabilities - */ - -static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mode = ide_find_dma_mode(drive, speed); - - if (mode == 0) { - if (hwif->pio_mask) - mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; - else - mode = XFER_PIO_4; - } - -// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); - - return min(speed, mode); -} - -int ide_use_fast_pio(ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - - if ((id->capability & 1) && drive->autodma) - return 1; - - if ((id->capability & 8) || (id->field_valid & 2)) - return 1; - - return 0; -} - -EXPORT_SYMBOL_GPL(ide_use_fast_pio); - -/* - * Standard (generic) timings for PIO modes, from ATA2 specification. - * These timings are for access to the IDE data port register *only*. - * Some drives may specify a mode, while also specifying a different - * value for cycle_time (from drive identification data). - */ -const ide_pio_timings_t ide_pio_timings[6] = { - { 70, 165, 600 }, /* PIO Mode 0 */ - { 50, 125, 383 }, /* PIO Mode 1 */ - { 30, 100, 240 }, /* PIO Mode 2 */ - { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ - { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ - { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ -}; - -EXPORT_SYMBOL_GPL(ide_pio_timings); - -/* - * Shared data/functions for determining best PIO mode for an IDE drive. - * Most of this stuff originally lived in cmd640.c, and changes to the - * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid - * breaking the fragile cmd640.c support. - */ - -/* - * Black list. Some drives incorrectly report their maximal PIO mode, - * at least in respect to CMD640. Here we keep info on some known drives. - */ -static struct ide_pio_info { - const char *name; - int pio; -} ide_pio_blacklist [] = { -/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */ - { "Conner Peripherals 540MB - CFS540A", 3 }, - - { "WDC AC2700", 3 }, - { "WDC AC2540", 3 }, - { "WDC AC2420", 3 }, - { "WDC AC2340", 3 }, - { "WDC AC2250", 0 }, - { "WDC AC2200", 0 }, - { "WDC AC21200", 4 }, - { "WDC AC2120", 0 }, - { "WDC AC2850", 3 }, - { "WDC AC1270", 3 }, - { "WDC AC1170", 1 }, - { "WDC AC1210", 1 }, - { "WDC AC280", 0 }, -/* { "WDC AC21000", 4 }, */ - { "WDC AC31000", 3 }, - { "WDC AC31200", 3 }, -/* { "WDC AC31600", 4 }, */ - - { "Maxtor 7131 AT", 1 }, - { "Maxtor 7171 AT", 1 }, - { "Maxtor 7213 AT", 1 }, - { "Maxtor 7245 AT", 1 }, - { "Maxtor 7345 AT", 1 }, - { "Maxtor 7546 AT", 3 }, - { "Maxtor 7540 AV", 3 }, - - { "SAMSUNG SHD-3121A", 1 }, - { "SAMSUNG SHD-3122A", 1 }, - { "SAMSUNG SHD-3172A", 1 }, - -/* { "ST51080A", 4 }, - * { "ST51270A", 4 }, - * { "ST31220A", 4 }, - * { "ST31640A", 4 }, - * { "ST32140A", 4 }, - * { "ST3780A", 4 }, - */ - { "ST5660A", 3 }, - { "ST3660A", 3 }, - { "ST3630A", 3 }, - { "ST3655A", 3 }, - { "ST3391A", 3 }, - { "ST3390A", 1 }, - { "ST3600A", 1 }, - { "ST3290A", 0 }, - { "ST3144A", 0 }, - { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */ - /* drive) according to Seagates FIND-ATA program */ - - { "QUANTUM ELS127A", 0 }, - { "QUANTUM ELS170A", 0 }, - { "QUANTUM LPS240A", 0 }, - { "QUANTUM LPS210A", 3 }, - { "QUANTUM LPS270A", 3 }, - { "QUANTUM LPS365A", 3 }, - { "QUANTUM LPS540A", 3 }, - { "QUANTUM LIGHTNING 540A", 3 }, - { "QUANTUM LIGHTNING 730A", 3 }, - - { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ - { "QUANTUM FIREBALL_640", 3 }, - { "QUANTUM FIREBALL_1080", 3 }, - { "QUANTUM FIREBALL_1280", 3 }, - { NULL, 0 } -}; - -/** - * ide_scan_pio_blacklist - check for a blacklisted drive - * @model: Drive model string - * - * This routine searches the ide_pio_blacklist for an entry - * matching the start/whole of the supplied model name. - * - * Returns -1 if no match found. - * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. - */ - -static int ide_scan_pio_blacklist (char *model) -{ - struct ide_pio_info *p; - - for (p = ide_pio_blacklist; p->name != NULL; p++) { - if (strncmp(p->name, model, strlen(p->name)) == 0) - return p->pio; - } - return -1; -} - -unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio) -{ - struct hd_driveid *id = drive->id; - int cycle_time = 0; - - if (id->field_valid & 2) { - if (id->capability & 8) - cycle_time = id->eide_pio_iordy; - else - cycle_time = id->eide_pio; - } - - /* conservative "downgrade" for all pre-ATA2 drives */ - if (pio < 3) { - if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time) - cycle_time = 0; /* use standard timing */ - } - - return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time; -} - -EXPORT_SYMBOL_GPL(ide_pio_cycle_time); - -/** - * ide_get_best_pio_mode - get PIO mode from drive - * @drive: drive to consider - * @mode_wanted: preferred mode - * @max_mode: highest allowed mode - * - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * - * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. - * This is used by most chipset support modules when "auto-tuning". - */ - -u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) -{ - int pio_mode; - struct hd_driveid* id = drive->id; - int overridden = 0; - - if (mode_wanted != 255) - return min_t(u8, mode_wanted, max_mode); - - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 && - (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) { - printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); - } else { - pio_mode = id->tPIO; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - if (id->field_valid & 2) { /* drive implements ATA2? */ - if (id->capability & 8) { /* IORDY supported? */ - if (id->eide_pio_modes & 7) { - overridden = 0; - if (id->eide_pio_modes & 4) - pio_mode = 5; - else if (id->eide_pio_modes & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } - } - - if (overridden) - printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", - drive->name); - - /* - * Conservative "downgrade" for all pre-ATA2 drives - */ - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 && - pio_mode && pio_mode < 4) { - pio_mode--; - printk(KERN_INFO "%s: applying conservative " - "PIO \"downgrade\"\n", drive->name); - } - } - - if (pio_mode > max_mode) - pio_mode = max_mode; - - return pio_mode; -} - -EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); - -/* req_pio == "255" for auto-tune */ -void ide_set_pio(ide_drive_t *drive, u8 req_pio) -{ - ide_hwif_t *hwif = drive->hwif; - u8 host_pio, pio; - - if (hwif->set_pio_mode == NULL) - return; - - BUG_ON(hwif->pio_mask == 0x00); - - host_pio = fls(hwif->pio_mask) - 1; - - pio = ide_get_best_pio_mode(drive, req_pio, host_pio); - - /* - * TODO: - * - report device max PIO mode - * - check req_pio != 255 against device max PIO mode - */ - printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", - drive->name, host_pio, req_pio, - req_pio == 255 ? "(auto-tune)" : "", pio); - - hwif->set_pio_mode(drive, pio); -} - -EXPORT_SYMBOL_GPL(ide_set_pio); - /** * ide_toggle_bounce - handle bounce buffering * @drive: drive to update @@ -362,7 +14,7 @@ EXPORT_SYMBOL_GPL(ide_set_pio); * Enable or disable bounce buffering for the device. Drives move * between PIO and DMA and that changes the rules we need. */ - + void ide_toggle_bounce(ide_drive_t *drive, int on) { u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */ @@ -370,219 +22,150 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) if (!PCI_DMA_BUS_IS_PHYS) { addr = BLK_BOUNCE_ANY; } else if (on && drive->media == ide_disk) { - if (HWIF(drive)->pci_dev) - addr = HWIF(drive)->pci_dev->dma_mask; + struct device *dev = drive->hwif->dev; + + if (dev && dev->dma_mask) + addr = *dev->dma_mask; } if (drive->queue) blk_queue_bounce_limit(drive->queue, addr); } -/** - * ide_set_xfer_rate - set transfer rate - * @drive: drive to set - * @speed: speed to attempt to set - * - * General helper for setting the speed of an IDE device. This - * function knows about user enforced limits from the configuration - * which speedproc() does not. High level drivers should never - * invoke speedproc() directly. - */ - -int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) +u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { - ide_hwif_t *hwif = drive->hwif; - - if (hwif->speedproc == NULL) - return -1; - - rate = ide_rate_filter(drive, rate); + struct ide_taskfile *tf = &cmd->tf; + u32 high, low; - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) { - if (hwif->set_pio_mode) - hwif->set_pio_mode(drive, rate - XFER_PIO_0); + low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + if (lba48) { + tf = &cmd->hob; + high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + } else + high = tf->device & 0xf; - /* - * FIXME: this is incorrect to return zero here but - * since all users of ide_set_xfer_rate() ignore - * the return value it is not a problem currently - */ - return 0; - } - - return hwif->speedproc(drive, rate); + return ((u64)high << 24) | low; } +EXPORT_SYMBOL_GPL(ide_get_lba_addr); -static void ide_dump_opcode(ide_drive_t *drive) +static void ide_dump_sector(ide_drive_t *drive) { - struct request *rq; - u8 opcode = 0; - int found = 0; - - spin_lock(&ide_lock); - rq = NULL; - if (HWGROUP(drive)) - rq = HWGROUP(drive)->rq; - spin_unlock(&ide_lock); - if (!rq) - return; - if (rq->cmd_type == REQ_TYPE_ATA_CMD || - rq->cmd_type == REQ_TYPE_ATA_TASK) { - char *args = rq->buffer; - if (args) { - opcode = args[0]; - found = 1; - } - } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *args = rq->special; - if (args) { - task_struct_t *tf = (task_struct_t *) args->tfRegister; - opcode = tf->command; - found = 1; - } - } - - printk("ide: failed opcode was: "); - if (!found) - printk("unknown\n"); + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; + u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); + + memset(&cmd, 0, sizeof(cmd)); + if (lba48) { + cmd.valid.in.tf = IDE_VALID_LBA; + cmd.valid.in.hob = IDE_VALID_LBA; + cmd.tf_flags = IDE_TFLAG_LBA48; + } else + cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; + + ide_tf_readback(drive, &cmd); + + if (lba48 || (tf->device & ATA_LBA)) + printk(KERN_CONT ", LBAsect=%llu", + (unsigned long long)ide_get_lba_addr(&cmd, lba48)); else - printk("0x%02x\n", opcode); + printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, + tf->device & 0xf, tf->lbal); } -static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) +static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - ide_hwif_t *hwif = HWIF(drive); - unsigned long flags; - u8 err = 0; - - local_irq_save(flags); - printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); - if (stat & BUSY_STAT) - printk("Busy "); - else { - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("DeviceFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); + printk(KERN_CONT "{ "); + if (err & ATA_ABORTED) + printk(KERN_CONT "DriveStatusError "); + if (err & ATA_ICRC) + printk(KERN_CONT "%s", + (err & ATA_ABORTED) ? "BadCRC " : "BadSector "); + if (err & ATA_UNC) + printk(KERN_CONT "UncorrectableError "); + if (err & ATA_IDNF) + printk(KERN_CONT "SectorIdNotFound "); + if (err & ATA_TRK0NF) + printk(KERN_CONT "TrackZeroNotFound "); + if (err & ATA_AMNF) + printk(KERN_CONT "AddrMarkNotFound "); + printk(KERN_CONT "}"); + if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK || + (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) { + struct request *rq = drive->hwif->rq; + + ide_dump_sector(drive); + + if (rq) + printk(KERN_CONT ", sector=%llu", + (unsigned long long)blk_rq_pos(rq)); } - printk("}\n"); - if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { - err = hwif->INB(IDE_ERROR_REG); - printk("%s: %s: error=0x%02x { ", drive->name, msg, err); - if (err & ABRT_ERR) printk("DriveStatusError "); - if (err & ICRC_ERR) - printk((err & ABRT_ERR) ? "BadCRC " : "BadSector "); - if (err & ECC_ERR) printk("UncorrectableError "); - if (err & ID_ERR) printk("SectorIdNotFound "); - if (err & TRK0_ERR) printk("TrackZeroNotFound "); - if (err & MARK_ERR) printk("AddrMarkNotFound "); - printk("}"); - if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || - (err & (ECC_ERR|ID_ERR|MARK_ERR))) { - if (drive->addressing == 1) { - __u64 sectors = 0; - u32 low = 0, high = 0; - low = ide_read_24(drive); - hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); - high = ide_read_24(drive); - sectors = ((__u64)high << 24) | low; - printk(", LBAsect=%llu, high=%d, low=%d", - (unsigned long long) sectors, - high, low); - } else { - u8 cur = hwif->INB(IDE_SELECT_REG); - if (cur & 0x40) { /* using LBA? */ - printk(", LBAsect=%ld", (unsigned long) - ((cur&0xf)<<24) - |(hwif->INB(IDE_HCYL_REG)<<16) - |(hwif->INB(IDE_LCYL_REG)<<8) - | hwif->INB(IDE_SECTOR_REG)); - } else { - printk(", CHS=%d/%d/%d", - (hwif->INB(IDE_HCYL_REG)<<8) + - hwif->INB(IDE_LCYL_REG), - cur & 0xf, - hwif->INB(IDE_SECTOR_REG)); - } - } - if (HWGROUP(drive) && HWGROUP(drive)->rq) - printk(", sector=%llu", - (unsigned long long)HWGROUP(drive)->rq->sector); - } - printk("\n"); - } - ide_dump_opcode(drive); - local_irq_restore(flags); - return err; + printk(KERN_CONT "\n"); +} + +static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) +{ + printk(KERN_CONT "{ "); + if (err & ATAPI_ILI) + printk(KERN_CONT "IllegalLengthIndication "); + if (err & ATAPI_EOM) + printk(KERN_CONT "EndOfMedia "); + if (err & ATA_ABORTED) + printk(KERN_CONT "AbortedCommand "); + if (err & ATA_MCR) + printk(KERN_CONT "MediaChangeRequested "); + if (err & ATAPI_LFS) + printk(KERN_CONT "LastFailedSense=0x%02x ", + (err & ATAPI_LFS) >> 4); + printk(KERN_CONT "}\n"); } /** - * ide_dump_atapi_status - print human readable atapi status + * ide_dump_status - translate ATA/ATAPI error * @drive: drive that status applies to * @msg: text message to print * @stat: status byte to decode * * Error reporting, in human readable form (luxurious, but a memory hog). + * Combines the drive name, message and status byte to provide a + * user understandable explanation of the device error. */ -static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) +u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) { - unsigned long flags; - - atapi_status_t status; - atapi_error_t error; + u8 err = 0; - status.all = stat; - error.all = 0; - local_irq_save(flags); - printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); - if (status.b.bsy) - printk("Busy "); + printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat); + if (stat & ATA_BUSY) + printk(KERN_CONT "Busy "); else { - if (status.b.drdy) printk("DriveReady "); - if (status.b.df) printk("DeviceFault "); - if (status.b.dsc) printk("SeekComplete "); - if (status.b.drq) printk("DataRequest "); - if (status.b.corr) printk("CorrectedError "); - if (status.b.idx) printk("Index "); - if (status.b.check) printk("Error "); + if (stat & ATA_DRDY) + printk(KERN_CONT "DriveReady "); + if (stat & ATA_DF) + printk(KERN_CONT "DeviceFault "); + if (stat & ATA_DSC) + printk(KERN_CONT "SeekComplete "); + if (stat & ATA_DRQ) + printk(KERN_CONT "DataRequest "); + if (stat & ATA_CORR) + printk(KERN_CONT "CorrectedError "); + if (stat & ATA_IDX) + printk(KERN_CONT "Index "); + if (stat & ATA_ERR) + printk(KERN_CONT "Error "); } - printk("}\n"); - if (status.b.check && !status.b.bsy) { - error.all = HWIF(drive)->INB(IDE_ERROR_REG); - printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all); - if (error.b.ili) printk("IllegalLengthIndication "); - if (error.b.eom) printk("EndOfMedia "); - if (error.b.abrt) printk("AbortedCommand "); - if (error.b.mcr) printk("MediaChangeRequested "); - if (error.b.sense_key) printk("LastFailedSense=0x%02x ", - error.b.sense_key); - printk("}\n"); + printk(KERN_CONT "}\n"); + if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) { + err = ide_read_error(drive); + printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err); + if (drive->media == ide_disk) + ide_dump_ata_error(drive, err); + else + ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); - local_irq_restore(flags); - return error.all; -} -/** - * ide_dump_status - translate ATA/ATAPI error - * @drive: drive the error occured on - * @msg: information string - * @stat: status byte - * - * Error reporting, in human readable form (luxurious, but a memory hog). - * Combines the drive name, message and status byte to provide a - * user understandable explanation of the device error. - */ + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); -u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) -{ - if (drive->media == ide_disk) - return ide_dump_ata_status(drive, msg, stat); - return ide_dump_atapi_status(drive, msg, stat); + return err; } - EXPORT_SYMBOL(ide_dump_status); |