diff options
Diffstat (limited to 'drivers/ide/cy82c693.c')
| -rw-r--r-- | drivers/ide/cy82c693.c | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 9383f67deae..f5820079a28 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator - * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * @@ -67,7 +67,7 @@ static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) /* * note: below we set the value for Bus Master IDE TimeOut Register - * I'm not absolutly sure what this does, but it solved my problem + * I'm not absolutely sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with * my IDE driver at the same time :-) * @@ -90,7 +90,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -141,9 +141,11 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } + if (drive->dn > 1) + pci_dev_put(dev); } -static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) +static void init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -161,7 +163,7 @@ static const struct ide_port_ops cy82c693_port_ops = { .set_dma_mode = cy82c693_set_dma_mode, }; -static const struct ide_port_info cy82c693_chipset __devinitdata = { +static const struct ide_port_info cy82c693_chipset = { .name = DRV_NAME, .init_iops = init_iops_cy82c693, .port_ops = &cy82c693_port_ops, @@ -171,7 +173,8 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cy82c693_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct pci_dev *dev2; int ret = -ENODEV; @@ -188,7 +191,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev return ret; } -static void __devexit cy82c693_remove(struct pci_dev *dev) +static void cy82c693_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; @@ -207,7 +210,7 @@ static struct pci_driver cy82c693_pci_driver = { .name = "Cypress_IDE", .id_table = cy82c693_pci_tbl, .probe = cy82c693_init_one, - .remove = __devexit_p(cy82c693_remove), + .remove = cy82c693_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; |