diff options
Diffstat (limited to 'drivers/ide/Kconfig')
| -rw-r--r-- | drivers/ide/Kconfig | 61 |
1 files changed, 25 insertions, 36 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 9827c5e686c..a04c49f2a01 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -197,8 +197,8 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK - default ARM && (ARCH_RPC || ARCH_SHARK) + depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC + default ARM && ARCH_RPC help This is the generic IDE driver. This driver attaches to the fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and @@ -322,12 +322,11 @@ config BLK_DEV_GENERIC which otherwise might not be supported. config BLK_DEV_OPTI621 - tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "OPTi 82C621 chipset enhanced support" select BLK_DEV_IDEPCI help This is a driver for the OPTi 82C621 EIDE controller. - Please read the comments at the top of <file:drivers/ide/pci/opti621.c>. + Please read the comments at the top of <file:drivers/ide/opti621.c>. config BLK_DEV_RZ1000 tristate "RZ1000 chipset bugfix/support" @@ -365,7 +364,7 @@ config BLK_DEV_ALI15X3 normal dual channel support. Please read the comments at the top of - <file:drivers/ide/pci/alim15x3.c>. + <file:drivers/ide/alim15x3.c>. If unsure, say N. @@ -417,7 +416,7 @@ config BLK_DEV_CY82C693 config BLK_DEV_CS5520 tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for PIO tuning and virtual DMA on the Cyrix MediaGX @@ -428,6 +427,7 @@ config BLK_DEV_CS5520 config BLK_DEV_CS5530 tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the Cyrix MediaGX 5530 chipset. This @@ -437,7 +437,7 @@ config BLK_DEV_CS5530 config BLK_DEV_CS5535 tristate "AMD CS5535 chipset support" - depends on X86 && !X86_64 + depends on X86_32 select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the NSC/AMD CS5535 companion chipset. @@ -488,6 +488,7 @@ config BLK_DEV_JMICRON config BLK_DEV_SC1200 tristate "National SCx200 chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help This driver adds support for the on-board IDE controller on the @@ -528,7 +529,7 @@ config BLK_DEV_NS87415 This driver adds detection and support for the NS87415 chip (used mainly on SPARC64 and PA-RISC machines). - Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>. + Please read the comments at the top of <file:drivers/ide/ns87415.c>. config BLK_DEV_PDC202XX_OLD tristate "PROMISE PDC202{46|62|65|67} support" @@ -547,7 +548,7 @@ config BLK_DEV_PDC202XX_OLD for more than one card. Please read the comments at the top of - <file:drivers/ide/pci/pdc202xx_old.c>. + <file:drivers/ide/pdc202xx_old.c>. If unsure, say N. @@ -593,7 +594,7 @@ config BLK_DEV_SIS5513 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740, SiS745, SiS750 - Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>. + Please read the comments at the top of <file:drivers/ide/sis5513.c>. config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" @@ -616,7 +617,7 @@ config BLK_DEV_SLC90E66 look-a-like to the PIIX4 it should be a nice addition. Please read the comments at the top of - <file:drivers/ide/pci/slc90e66.c>. + <file:drivers/ide/slc90e66.c>. config BLK_DEV_TRM290 tristate "Tekram TRM290 chipset support" @@ -625,7 +626,7 @@ config BLK_DEV_TRM290 This driver adds support for bus master DMA transfers using the Tekram TRM290 PCI IDE chip. Volunteers are needed for further tweaking and development. - Please read the comments at the top of <file:drivers/ide/pci/trm290.c>. + Please read the comments at the top of <file:drivers/ide/trm290.c>. config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" @@ -677,19 +678,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" - default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + default BLK_DEV_IDE_AU1XXX_PIO_DBDMA + depends on BLK_DEV_IDE_AU1XXX config BLK_DEV_IDE_AU1XXX_PIO_DBDMA bool "PIO+DbDMA IDE for AMD Alchemy Au1200" config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX endchoice config BLK_DEV_IDE_TX4938 @@ -702,11 +703,6 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF -config BLK_DEV_IDE_AT91 - tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support" - depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40 - select IDE_TIMINGS - config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" depends on ARM && ARCH_ACORN @@ -729,13 +725,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config IDE_H8300 - tristate "H8300 IDE support" - depends on H8300 - default y - help - Enables the H8300 IDE driver. - config BLK_DEV_GAYLE tristate "Amiga Gayle IDE interface support" depends on AMIGA @@ -761,8 +750,8 @@ config BLK_DEV_GAYLE use Gayle IDE interfaces on the Zorro expansion bus. config BLK_DEV_BUDDHA - tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" - depends on ZORRO && EXPERIMENTAL + tristate "Buddha/Catweasel/X-Surf IDE interface support" + depends on ZORRO help This is the IDE driver for the IDE interfaces on the Buddha, Catweasel and X-Surf expansion boards. It supports up to two interfaces on the @@ -836,7 +825,7 @@ config BLK_DEV_ALI14XX of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ali14xx.c> for more info. + <file:drivers/ide/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -847,7 +836,7 @@ config BLK_DEV_DTC2278 boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/dtc2278.c> files for more info. + <file:drivers/ide/dtc2278.c> files for more info. config BLK_DEV_HT6560B tristate "Holtek HT6560B support" @@ -858,7 +847,7 @@ config BLK_DEV_HT6560B boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ht6560b.c> files for more info. + <file:drivers/ide/ht6560b.c> files for more info. config BLK_DEV_QD65XX tristate "QDI QD65xx support" @@ -867,7 +856,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c> for more info. config BLK_DEV_UMC8672 @@ -879,7 +868,7 @@ config BLK_DEV_UMC8672 boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/umc8672.c> for more info. + <file:drivers/ide/umc8672.c> for more info. endif |