diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-sis96x.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-sis96x.c | 66 |
1 files changed, 24 insertions, 42 deletions
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index dc235bb8e24..8dc2fc5f74f 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -1,7 +1,4 @@ /* - sis96x.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com> This program is free software; you can redistribute it and/or modify @@ -39,8 +36,8 @@ #include <linux/stddef.h> #include <linux/ioport.h> #include <linux/i2c.h> -#include <linux/init.h> -#include <asm/io.h> +#include <linux/acpi.h> +#include <linux/io.h> /* base address register in PCI config space */ #define SIS96x_BAR 0x04 @@ -111,7 +108,7 @@ static int sis96x_transaction(int size) /* check it again */ if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&sis96x_adapter.dev, "Successful\n"); } @@ -134,21 +131,21 @@ static int sis96x_transaction(int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); - result = -1; + result = -ETIMEDOUT; } /* device error - probably missing ACK */ if (temp & 0x02) { dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n"); - result = -1; + result = -ENXIO; } /* bus collision */ if (temp & 0x04) { dev_dbg(&sis96x_adapter.dev, "Bus collision!\n"); - result = -1; + result = -EIO; } /* Finish up by resetting the bus */ @@ -161,11 +158,12 @@ static int sis96x_transaction(int size) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { + int status; switch (size) { case I2C_SMBUS_QUICK: @@ -200,20 +198,14 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, SIS96x_PROC_CALL : SIS96x_WORD_DATA); break; - case I2C_SMBUS_BLOCK_DATA: - /* TO DO: */ - dev_info(&adap->dev, "SMBus block not implemented!\n"); - return -1; - break; - default: - dev_info(&adap->dev, "Unsupported I2C size\n"); - return -1; - break; + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } - if (sis96x_transaction(size)) - return -1; + status = sis96x_transaction(size); + if (status) + return status; if ((size != SIS96x_PROC_CALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK))) @@ -248,19 +240,18 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS96X, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; -static struct pci_device_id sis96x_ids[] = { +static const struct pci_device_id sis96x_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) }, { 0, } }; MODULE_DEVICE_TABLE (pci, sis96x_ids); -static int __devinit sis96x_probe(struct pci_dev *dev, +static int sis96x_probe(struct pci_dev *dev, const struct pci_device_id *id) { u16 ww = 0; @@ -286,6 +277,10 @@ static int __devinit sis96x_probe(struct pci_dev *dev, dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n", sis96x_smbus_base); + retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]); + if (retval) + return -ENODEV; + /* Everything is happy, let's grab the memory and set things up. */ if (!request_region(sis96x_smbus_base, SMB_IOSIZE, sis96x_driver.name)) { @@ -312,7 +307,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev, return retval; } -static void __devexit sis96x_remove(struct pci_dev *dev) +static void sis96x_remove(struct pci_dev *dev) { if (sis96x_smbus_base) { i2c_del_adapter(&sis96x_adapter); @@ -325,24 +320,11 @@ static struct pci_driver sis96x_driver = { .name = "sis96x_smbus", .id_table = sis96x_ids, .probe = sis96x_probe, - .remove = __devexit_p(sis96x_remove), + .remove = sis96x_remove, }; -static int __init i2c_sis96x_init(void) -{ - return pci_register_driver(&sis96x_driver); -} - -static void __exit i2c_sis96x_exit(void) -{ - pci_unregister_driver(&sis96x_driver); -} +module_pci_driver(sis96x_driver); MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); MODULE_DESCRIPTION("SiS96x SMBus driver"); MODULE_LICENSE("GPL"); - -/* Register initialization functions using helper macros */ -module_init(i2c_sis96x_init); -module_exit(i2c_sis96x_exit); - |