aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-i801.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-i801.c')
-rw-r--r--drivers/i2c/busses/i2c-i801.c661
1 files changed, 531 insertions, 130 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 02835ce7ff4..6777cd6f877 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -2,7 +2,7 @@
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
- Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007 - 2012 Jean Delvare <jdelvare@suse.de>
Copyright (C) 2010 Intel Corporation,
David Woodhouse <dwmw2@infradead.org>
@@ -44,11 +44,23 @@
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
- Cougar Point (PCH) 0x1c22 32 hard yes yes yes
+ 6 Series (PCH) 0x1c22 32 hard yes yes yes
Patsburg (PCH) 0x1d22 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ BayTrail (SOC) 0x0f12 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -57,10 +69,12 @@
Block process call transaction no
I2C block read transaction yes (doesn't use the block buffer)
Slave mode no
+ Interrupt processing yes
See the file Documentation/i2c/busses/i2c-i801 for details.
*/
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -72,6 +86,16 @@
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+#include <linux/gpio.h>
+#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_device.h>
+#endif
/* I801 SMBus address offsets */
#define SMBHSTSTS(p) (0 + (p)->smba)
@@ -87,23 +111,23 @@
/* PCI Address Constants */
#define SMBBAR 4
+#define SMBPCISTS 0x006
#define SMBHSTCFG 0x040
+/* Host status bits for SMBPCISTS */
+#define SMBPCISTS_INTS 0x08
+
/* Host configuration bits for SMBHSTCFG */
#define SMBHSTCFG_HST_EN 1
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
-/* Auxillary control register bits, ICH4+ only */
+/* Auxiliary control register bits, ICH4+ only */
#define SMBAUXCTL_CRC 1
#define SMBAUXCTL_E32B 2
-/* kill bit for SMBHSTCNT */
-#define SMBHSTCNT_KILL 2
-
/* Other settings */
-#define MAX_TIMEOUT 100
-#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
+#define MAX_RETRIES 400
/* I801 command constants */
#define I801_QUICK 0x00
@@ -113,10 +137,13 @@
#define I801_PROC_CALL 0x10 /* unimplemented */
#define I801_BLOCK_DATA 0x14
#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
-#define I801_BLOCK_LAST 0x34
-#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */
-#define I801_START 0x40
-#define I801_PEC_EN 0x80 /* ICH3 and later */
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN 0x01
+#define SMBHSTCNT_KILL 0x02
+#define SMBHSTCNT_LAST_BYTE 0x20
+#define SMBHSTCNT_START 0x40
+#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
/* I801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE 0x80
@@ -128,14 +155,41 @@
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
-#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
- SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
- SMBHSTSTS_INTR)
+#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+ SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+ STATUS_ERROR_FLAGS)
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
+
+struct i801_mux_config {
+ char *gpio_chip;
+ unsigned values[3];
+ int n_values;
+ unsigned classes[3];
+ unsigned gpios[2]; /* Relative to gpio_chip->base */
+ int n_gpios;
+};
struct i801_priv {
struct i2c_adapter adapter;
@@ -143,6 +197,23 @@ struct i801_priv {
unsigned char original_hstcfg;
struct pci_dev *pci_dev;
unsigned int features;
+
+ /* isr processing */
+ wait_queue_head_t waitq;
+ u8 status;
+
+ /* Command state used by isr for byte-by-byte block transactions */
+ u8 cmd;
+ bool is_read;
+ int count;
+ int len;
+ u8 *data;
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+ const struct i801_mux_config *mux_drvdata;
+ struct platform_device *mux_pdev;
+#endif
};
static struct pci_driver i801_driver;
@@ -151,17 +222,25 @@ static struct pci_driver i801_driver;
#define FEATURE_BLOCK_BUFFER (1 << 1)
#define FEATURE_BLOCK_PROC (1 << 2)
#define FEATURE_I2C_BLOCK_READ (1 << 3)
+#define FEATURE_IRQ (1 << 4)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF (1 << 15)
static const char *i801_feature_names[] = {
"SMBus PEC",
"Block buffer",
"Block process call",
"I2C block read",
+ "Interrupt",
};
static unsigned int disable_features;
module_param(disable_features, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+ "\t\t 0x01 disable SMBus PEC\n"
+ "\t\t 0x02 disable the block buffer\n"
+ "\t\t 0x08 disable the I2C block read functionality\n"
+ "\t\t 0x10 don't use interrupts ");
/* Make sure the SMBus host is ready to start transmitting.
Return 0 if it is, -EBUSY if it is not. */
@@ -192,19 +271,28 @@ static int i801_check_pre(struct i801_priv *priv)
return 0;
}
-/* Convert the status register to an error code, and clear it. */
-static int i801_check_post(struct i801_priv *priv, int status, int timeout)
+/*
+ * Convert the status register to an error code, and clear it.
+ * Note that status only contains the bits we want to clear, not the
+ * actual register value.
+ */
+static int i801_check_post(struct i801_priv *priv, int status)
{
int result = 0;
- /* If the SMBus is still busy, we give up */
- if (timeout) {
+ /*
+ * If the SMBus is still busy, we give up
+ * Note: This timeout condition only happens when using polling
+ * transactions. For interrupt operation, NAK/timeout is indicated by
+ * DEV_ERR.
+ */
+ if (unlikely(status < 0)) {
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
SMBHSTCNT(priv));
- msleep(1);
+ usleep_range(1000, 2000);
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
SMBHSTCNT(priv));
@@ -231,64 +319,76 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout)
dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
}
- if (result) {
- /* Clear error flags */
- outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
- status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
- if (status) {
- dev_warn(&priv->pci_dev->dev, "Failed clearing status "
- "flags at end of transaction (%02x)\n",
- status);
- }
- }
+ /* Clear status flags except BYTE_DONE, to be cleared by caller */
+ outb_p(status, SMBHSTSTS(priv));
return result;
}
-static int i801_transaction(struct i801_priv *priv, int xact)
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
{
- int status;
- int result;
int timeout = 0;
-
- result = i801_check_pre(priv);
- if (result < 0)
- return result;
-
- /* the current contents of SMBHSTCNT can be overwritten, since PEC,
- * INTREN, SMBSCMD are passed in xact */
- outb_p(xact | I801_START, SMBHSTCNT(priv));
+ int status;
/* We will always wait for a fraction of a second! */
do {
- msleep(1);
+ usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
- } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+ } while (((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
+ (timeout++ < MAX_RETRIES));
- result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
- if (result < 0)
- return result;
-
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
- return 0;
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
+ return -ETIMEDOUT;
+ }
+ return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
}
-/* wait for INTR bit as advised by Intel */
-static void i801_wait_hwpec(struct i801_priv *priv)
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
{
int timeout = 0;
int status;
+ /* We will always wait for a fraction of a second! */
do {
- msleep(1);
+ usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
- } while ((!(status & SMBHSTSTS_INTR))
- && (timeout++ < MAX_TIMEOUT));
+ } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
+ (timeout++ < MAX_RETRIES));
- if (timeout > MAX_TIMEOUT)
- dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
+ return -ETIMEDOUT;
+ }
+ return status & STATUS_ERROR_FLAGS;
+}
- outb_p(status, SMBHSTSTS(priv));
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+ int status;
+ int result;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ if (priv->features & FEATURE_IRQ) {
+ outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+ wait_event(priv->waitq, (status = priv->status));
+ priv->status = 0;
+ return i801_check_post(priv, status);
+ }
+
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * SMBSCMD are passed in xact */
+ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+ status = i801_wait_intr(priv);
+ return i801_check_post(priv, status);
}
static int i801_block_transaction_by_block(struct i801_priv *priv,
@@ -308,8 +408,8 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
outb_p(data->block[i+1], SMBBLKDAT(priv));
}
- status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
- I801_PEC_EN * hwpec);
+ status = i801_transaction(priv, I801_BLOCK_DATA |
+ (hwpec ? SMBHSTCNT_PEC_EN : 0));
if (status)
return status;
@@ -325,6 +425,98 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
return 0;
}
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+ if (priv->is_read) {
+ /* For SMBus block reads, length is received with first byte */
+ if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+ (priv->count == 0)) {
+ priv->len = inb_p(SMBHSTDAT0(priv));
+ if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ priv->len);
+ /* FIXME: Recover */
+ priv->len = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ dev_dbg(&priv->pci_dev->dev,
+ "SMBus block read size is %d\n",
+ priv->len);
+ }
+ priv->data[-1] = priv->len;
+ }
+
+ /* Read next byte */
+ if (priv->count < priv->len)
+ priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+ else
+ dev_dbg(&priv->pci_dev->dev,
+ "Discarding extra byte on block read\n");
+
+ /* Set LAST_BYTE for last byte of read transaction */
+ if (priv->count == priv->len - 1)
+ outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+ SMBHSTCNT(priv));
+ } else if (priv->count < priv->len - 1) {
+ /* Write next byte, except for IRQ after last byte */
+ outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
+ }
+
+ /* Clear BYTE_DONE to continue with next byte */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+/*
+ * There are two kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ * INTR - Success
+ * DEV_ERR - Invalid command, NAK or communication timeout
+ * BUS_ERR - SMI# transaction collision
+ * FAILED - transaction was canceled due to a KILL request
+ * When any of these occur, update ->status and wake up the waitq.
+ * ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ * occurs for each byte of a byte-by-byte to prepare the next byte.
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+ struct i801_priv *priv = dev_id;
+ u16 pcists;
+ u8 status;
+
+ /* Confirm this is our interrupt */
+ pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+ if (!(pcists & SMBPCISTS_INTS))
+ return IRQ_NONE;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status != 0x42)
+ dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status);
+
+ if (status & SMBHSTSTS_BYTE_DONE)
+ i801_isr_byte_done(priv);
+
+ /*
+ * Clear irq sources and report transaction result.
+ * ->status must be cleared before the next transaction is started.
+ */
+ status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
+ if (status) {
+ outb_p(status, SMBHSTSTS(priv));
+ priv->status |= status;
+ wake_up(&priv->waitq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * For "byte-by-byte" block transactions:
+ * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ * I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
union i2c_smbus_data *data,
char read_write, int command,
@@ -334,7 +526,6 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
int smbcmd;
int status;
int result;
- int timeout;
result = i801_check_pre(priv);
if (result < 0)
@@ -347,36 +538,39 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
outb_p(data->block[1], SMBBLKDAT(priv));
}
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+ read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+
+ if (priv->features & FEATURE_IRQ) {
+ priv->is_read = (read_write == I2C_SMBUS_READ);
+ if (len == 1 && priv->is_read)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+ priv->len = len;
+ priv->count = 0;
+ priv->data = &data->block[1];
+
+ outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ wait_event(priv->waitq, (status = priv->status));
+ priv->status = 0;
+ return i801_check_post(priv, status);
+ }
+
for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ) {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA)
- smbcmd = I801_I2C_BLOCK_LAST;
- else
- smbcmd = I801_BLOCK_LAST;
- } else {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA
- && read_write == I2C_SMBUS_READ)
- smbcmd = I801_I2C_BLOCK_DATA;
- else
- smbcmd = I801_BLOCK_DATA;
- }
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
+ if (i == len && read_write == I2C_SMBUS_READ)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ outb_p(smbcmd, SMBHSTCNT(priv));
if (i == 1)
- outb_p(inb(SMBHSTCNT(priv)) | I801_START,
+ outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
SMBHSTCNT(priv));
- /* We will always wait for a fraction of a second! */
- timeout = 0;
- do {
- msleep(1);
- status = inb_p(SMBHSTSTS(priv));
- } while ((!(status & SMBHSTSTS_BYTE_DONE))
- && (timeout++ < MAX_TIMEOUT));
-
- result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
- if (result < 0)
- return result;
+ status = i801_wait_byte_done(priv);
+ if (status)
+ goto exit;
if (i == 1 && read_write == I2C_SMBUS_READ
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -403,10 +597,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
outb_p(data->block[i+1], SMBBLKDAT(priv));
/* signals SMBBLKDAT ready */
- outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
- return 0;
+ status = i801_wait_intr(priv);
+exit:
+ return i801_check_post(priv, status);
}
static int i801_set_block_buffer_mode(struct i801_priv *priv)
@@ -461,9 +657,6 @@ static int i801_block_transaction(struct i801_priv *priv,
read_write,
command, hwpec);
- if (result == 0 && hwpec)
- i801_wait_hwpec(priv);
-
if (command == I2C_SMBUS_I2C_BLOCK_DATA
&& read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
@@ -551,7 +744,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
ret = i801_block_transaction(priv, data, read_write, size,
hwpec);
else
- ret = i801_transaction(priv, xact | ENABLE_INT9);
+ ret = i801_transaction(priv, xact);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
time, so we forcibly disable it after every transaction. Turn off
@@ -620,12 +813,24 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, i801_ids);
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
+#if defined CONFIG_X86 && defined CONFIG_DMI
static unsigned char apanel_addr;
/* Scan the system ROM for the signature "FJKEYINF" */
@@ -655,11 +860,7 @@ static void __init input_apanel_init(void)
}
iounmap(bios);
}
-#else
-static void __init input_apanel_init(void) {}
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
struct dmi_onboard_device_info {
const char *name;
u8 type;
@@ -667,14 +868,14 @@ struct dmi_onboard_device_info {
const char *i2c_type;
};
-static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
+static const struct dmi_onboard_device_info dmi_devices[] = {
{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
{ "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
};
-static void __devinit dmi_check_onboard_device(u8 type, const char *name,
- struct i2c_adapter *adap)
+static void dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
{
int i;
struct i2c_board_info info;
@@ -697,8 +898,7 @@ static void __devinit dmi_check_onboard_device(u8 type, const char *name,
/* We use our own function to check for onboard devices instead of
dmi_find_device() as some buggy BIOS's have the devices we are interested
in marked as disabled */
-static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
- void *adap)
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
{
int i, count;
@@ -725,10 +925,192 @@ static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
dmi_check_onboard_device(type, name, adap);
}
}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = apanel_addr;
+ strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+ i2c_new_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03 },
+ .n_values = 2,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03, 0x01 },
+ .n_values = 3,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ { }
+};
+
+/* Setup multiplexing if needed */
+static int i801_add_mux(struct i801_priv *priv)
+{
+ struct device *dev = &priv->adapter.dev;
+ const struct i801_mux_config *mux_config;
+ struct i2c_mux_gpio_platform_data gpio_data;
+ int err;
+
+ if (!priv->mux_drvdata)
+ return 0;
+ mux_config = priv->mux_drvdata;
+
+ /* Prepare the platform data */
+ memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+ gpio_data.parent = priv->adapter.nr;
+ gpio_data.values = mux_config->values;
+ gpio_data.n_values = mux_config->n_values;
+ gpio_data.classes = mux_config->classes;
+ gpio_data.gpio_chip = mux_config->gpio_chip;
+ gpio_data.gpios = mux_config->gpios;
+ gpio_data.n_gpios = mux_config->n_gpios;
+ gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+ /* Register the mux device */
+ priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+ PLATFORM_DEVID_AUTO, &gpio_data,
+ sizeof(struct i2c_mux_gpio_platform_data));
+ if (IS_ERR(priv->mux_pdev)) {
+ err = PTR_ERR(priv->mux_pdev);
+ priv->mux_pdev = NULL;
+ dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+ if (priv->mux_pdev)
+ platform_device_unregister(priv->mux_pdev);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ const struct dmi_system_id *id;
+ const struct i801_mux_config *mux_config;
+ unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ int i;
+
+ id = dmi_first_match(mux_dmi_table);
+ if (id) {
+ /* Remove branch classes from trunk */
+ mux_config = id->driver_data;
+ for (i = 0; i < mux_config->n_values; i++)
+ class &= ~mux_config->classes[i];
+
+ /* Remember for later */
+ priv->mux_drvdata = mux_config;
+ }
+
+ return class;
+}
+#else
+static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
#endif
-static int __devinit i801_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char temp;
int err, i;
@@ -740,13 +1122,22 @@ static int __devinit i801_probe(struct pci_dev *dev,
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
- priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ priv->adapter.class = i801_get_adapter_class(priv);
priv->adapter.algo = &smbus_algorithm;
priv->pci_dev = dev;
switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
+ priv->features |= FEATURE_IDF;
+ /* fall through */
default:
priv->features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_IRQ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
priv->features |= FEATURE_SMBUS_PEC;
@@ -806,16 +1197,30 @@ static int __devinit i801_probe(struct pci_dev *dev,
}
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
- if (temp & SMBHSTCFG_SMB_SMI_EN)
+ if (temp & SMBHSTCFG_SMB_SMI_EN) {
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
- else
- dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+ /* Disable SMBus interrupt feature if SMBus using SMI# */
+ priv->features &= ~FEATURE_IRQ;
+ }
/* Clear special mode bits */
if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
outb_p(inb_p(SMBAUXCTL(priv)) &
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+ if (priv->features & FEATURE_IRQ) {
+ init_waitqueue_head(&priv->waitq);
+
+ err = request_irq(dev->irq, i801_isr, IRQF_SHARED,
+ i801_driver.name, priv);
+ if (err) {
+ dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+ dev->irq, err);
+ goto exit_release;
+ }
+ dev_info(&dev->dev, "SMBus using PCI Interrupt\n");
+ }
+
/* set up the sysfs linkage to our parent device */
priv->adapter.dev.parent = &dev->dev;
@@ -827,28 +1232,20 @@ static int __devinit i801_probe(struct pci_dev *dev,
err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
- goto exit_release;
+ goto exit_free_irq;
}
- /* Register optional slaves */
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
- if (apanel_addr) {
- struct i2c_board_info info;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = apanel_addr;
- strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
- i2c_new_device(&priv->adapter, &info);
- }
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
- if (dmi_name_in_vendors("FUJITSU"))
- dmi_walk(dmi_check_onboard_devices, &priv->adapter);
-#endif
+ i801_probe_optional_slaves(priv);
+ /* We ignore errors - multiplexing is optional */
+ i801_add_mux(priv);
pci_set_drvdata(dev, priv);
+
return 0;
+exit_free_irq:
+ if (priv->features & FEATURE_IRQ)
+ free_irq(dev->irq, priv);
exit_release:
pci_release_region(dev, SMBBAR);
exit:
@@ -856,14 +1253,18 @@ exit:
return err;
}
-static void __devexit i801_remove(struct pci_dev *dev)
+static void i801_remove(struct pci_dev *dev)
{
struct i801_priv *priv = pci_get_drvdata(dev);
+ i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+ if (priv->features & FEATURE_IRQ)
+ free_irq(dev->irq, priv);
pci_release_region(dev, SMBBAR);
- pci_set_drvdata(dev, NULL);
+
kfree(priv);
/*
* do not call pci_disable_device(dev) since it can cause hard hangs on
@@ -897,14 +1298,15 @@ static struct pci_driver i801_driver = {
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
- .remove = __devexit_p(i801_remove),
+ .remove = i801_remove,
.suspend = i801_suspend,
.resume = i801_resume,
};
static int __init i2c_i801_init(void)
{
- input_apanel_init();
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
return pci_register_driver(&i801_driver);
}
@@ -913,8 +1315,7 @@ static void __exit i2c_i801_exit(void)
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
- "Jean Delvare <khali@linux-fr.org>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-05 21:38:26 +0000