aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon/w83781d.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/w83781d.c')
-rw-r--r--drivers/hwmon/w83781d.c1578
1 files changed, 853 insertions, 725 deletions
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index f942ecdd47c..84911616d8c 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1,72 +1,77 @@
/*
- w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- and Mark Studebaker <mdsxyz123@yahoo.com>
- Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+ * Philip Edelbrock <phil@netroedge.com>,
+ * and Mark Studebaker <mdsxyz123@yahoo.com>
+ * Copyright (c) 2007 - 2008 Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
/*
- Supports following chips:
-
- Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
- as99127f 7 3 0 3 0x31 0x12c3 yes no
- as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
- w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
- w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
- w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
+ * Supports following chips:
+ *
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * as99127f 7 3 0 3 0x31 0x12c3 yes no
+ * as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
+ * w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
+ * w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
+ * w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
+ *
+ */
-*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/hwmon-sysfs.h>
#include <linux/sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
-#include <asm/io.h>
-#include "lm75.h"
-/* ISA device, if found */
-static struct platform_device *pdev;
+#ifdef CONFIG_ISA
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#endif
+
+#include "lm75.h"
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
+
+enum chips { w83781d, w83782d, w83783s, as99127f };
/* Insmod parameters */
-I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f);
-I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+static unsigned short force_subclients[4];
+module_param_array(force_subclients, short, NULL, 0);
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-static int init = 1;
+static bool init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -140,8 +145,10 @@ static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
#define W83781D_REG_I2C_ADDR 0x48
#define W83781D_REG_I2C_SUBADDR 0x4A
-/* The following are undocumented in the data sheets however we
- received the information in an email from Winbond tech support */
+/*
+ * The following are undocumented in the data sheets however we
+ * received the information in an email from Winbond tech support
+ */
/* Sensor selection - not on 781d */
#define W83781D_REG_SCFG1 0x5D
static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
@@ -152,7 +159,7 @@ static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
#define W83781D_DEFAULT_BETA 3435
/* Conversions */
-#define IN_TO_REG(val) SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
+#define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255)
#define IN_FROM_REG(val) ((val) * 16)
static inline u8
@@ -160,8 +167,8 @@ FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 255;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline long
@@ -174,13 +181,13 @@ FAN_FROM_REG(u8 val, int div)
return 1350000 / (val * div);
}
-#define TEMP_TO_REG(val) SENSORS_LIMIT((val) / 1000, -127, 128)
+#define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128)
#define TEMP_FROM_REG(val) ((val) * 1000)
-#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \
- (val) ^ 0x7fff : (val))
-#define BEEP_MASK_TO_REG(val,type) ((type) == as99127f ? \
- (~(val)) & 0x7fff : (val) & 0xffffff)
+#define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \
+ (~(val)) & 0x7fff : (val) & 0xff7fff)
+#define BEEP_MASK_TO_REG(val, type) ((type) == as99127f ? \
+ (~(val)) & 0x7fff : (val) & 0xff7fff)
#define DIV_FROM_REG(val) (1 << (val))
@@ -188,9 +195,8 @@ static inline u8
DIV_TO_REG(long val, enum chips type)
{
int i;
- val = SENSORS_LIMIT(val, 1,
- ((type == w83781d
- || type == as99127f) ? 8 : 128)) >> 1;
+ val = clamp_val(val, 1,
+ ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -199,25 +205,16 @@ DIV_TO_REG(long val, enum chips type)
return i;
}
-/* There are some complications in a module like this. First off, W83781D chips
- may be both present on the SMBus and the ISA bus, and we have to handle
- those cases separately at some places. Second, there might be several
- W83781D chips available (well, actually, that is probably never done; but
- it is a clean illustration of how to handle a case like that). Finally,
- a specific chip may be attached to *both* ISA and SMBus, and we would
- not like to detect it double. Fortunately, in the case of the W83781D at
- least, a register tells us what SMBus address we are on, so that helps
- a bit - except if there could be more than one SMBus. Groan. No solution
- for this yet. */
-
-/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
- the driver field to differentiate between I2C and ISA chips. */
struct w83781d_data {
- struct i2c_client client;
+ struct i2c_client *client;
struct device *hwmon_dev;
struct mutex lock;
enum chips type;
+ /* For ISA device only */
+ const char *name;
+ int isa_addr;
+
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -240,48 +237,27 @@ struct w83781d_data {
u8 vid; /* Register encoding, combined */
u32 alarms; /* Register encoding, combined */
u32 beep_mask; /* Register encoding, combined */
- u8 beep_enable; /* Boolean */
u8 pwm[4]; /* Register value */
u8 pwm2_enable; /* Boolean */
- u16 sens[3]; /* 782D/783S only.
- 1 = pentium diode; 2 = 3904 diode;
- 4 = thermistor */
+ u16 sens[3]; /*
+ * 782D/783S only.
+ * 1 = pentium diode; 2 = 3904 diode;
+ * 4 = thermistor
+ */
u8 vrm;
};
-static int w83781d_attach_adapter(struct i2c_adapter *adapter);
-static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83781d_detach_client(struct i2c_client *client);
-
-static int __devinit w83781d_isa_probe(struct platform_device *pdev);
-static int __devexit w83781d_isa_remove(struct platform_device *pdev);
+static struct w83781d_data *w83781d_data_if_isa(void);
+static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
static int w83781d_read_value(struct w83781d_data *data, u16 reg);
static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
static struct w83781d_data *w83781d_update_device(struct device *dev);
static void w83781d_init_device(struct device *dev);
-static struct i2c_driver w83781d_driver = {
- .driver = {
- .name = "w83781d",
- },
- .attach_adapter = w83781d_attach_adapter,
- .detach_client = w83781d_detach_client,
-};
-
-static struct platform_driver w83781d_isa_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "w83781d",
- },
- .probe = w83781d_isa_probe,
- .remove = w83781d_isa_remove,
-};
-
-
/* following are the sysfs callback functions */
#define show_in_reg(reg) \
-static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
char *buf) \
{ \
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
@@ -294,20 +270,21 @@ show_in_reg(in_min);
show_in_reg(in_max);
#define store_in_reg(REG, reg) \
-static ssize_t store_in_##reg (struct device *dev, struct device_attribute \
+static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
*da, const char *buf, size_t count) \
{ \
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = dev_get_drvdata(dev); \
int nr = attr->index; \
- u32 val; \
- \
- val = simple_strtoul(buf, NULL, 10); \
- \
+ unsigned long val; \
+ int err = kstrtoul(buf, 10, &val); \
+ if (err) \
+ return err; \
mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
- w83781d_write_value(data, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
- \
+ w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
+ data->in_##reg[nr]); \
+ \
mutex_unlock(&data->update_lock); \
return count; \
}
@@ -333,12 +310,12 @@ sysfs_in_offsets(7);
sysfs_in_offsets(8);
#define show_fan_reg(reg) \
-static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
char *buf) \
{ \
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = w83781d_update_device(dev); \
- return sprintf(buf,"%ld\n", \
+ return sprintf(buf, "%ld\n", \
FAN_FROM_REG(data->reg[attr->index], \
DIV_FROM_REG(data->fan_div[attr->index]))); \
}
@@ -352,9 +329,12 @@ store_fan_min(struct device *dev, struct device_attribute *da,
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = dev_get_drvdata(dev);
int nr = attr->index;
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] =
@@ -377,17 +357,17 @@ static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
show_fan_min, store_fan_min, 2);
#define show_temp_reg(reg) \
-static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
char *buf) \
{ \
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = w83781d_update_device(dev); \
int nr = attr->index; \
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
- return sprintf(buf,"%d\n", \
+ return sprintf(buf, "%d\n", \
LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
} else { /* TEMP1 */ \
- return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+ return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
} \
}
show_temp_reg(temp);
@@ -395,16 +375,16 @@ show_temp_reg(temp_max);
show_temp_reg(temp_max_hyst);
#define store_temp_reg(REG, reg) \
-static ssize_t store_temp_##reg (struct device *dev, \
+static ssize_t store_temp_##reg(struct device *dev, \
struct device_attribute *da, const char *buf, size_t count) \
{ \
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = dev_get_drvdata(dev); \
int nr = attr->index; \
long val; \
- \
- val = simple_strtol(buf, NULL, 10); \
- \
+ int err = kstrtol(buf, 10, &val); \
+ if (err) \
+ return err; \
mutex_lock(&data->update_lock); \
\
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
@@ -452,13 +432,17 @@ show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
}
static ssize_t
-store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+store_vrm_reg(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct w83781d_data *data = dev_get_drvdata(dev);
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
- data->vrm = val;
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+ data->vrm = clamp_val(val, 0, 255);
return count;
}
@@ -507,34 +491,33 @@ static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
-static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_beep_mask(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
return sprintf(buf, "%ld\n",
(long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
}
-static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n", (long)data->beep_enable);
-}
static ssize_t
store_beep_mask(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct w83781d_data *data = dev_get_drvdata(dev);
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
- data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+ data->beep_mask &= 0x8000; /* preserve beep enable */
+ data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
data->beep_mask & 0xff);
w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
- ((data->beep_mask >> 8) & 0x7f)
- | data->beep_enable << 7);
+ (data->beep_mask >> 8) & 0xff);
if (data->type != w83781d && data->type != as99127f) {
w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
((data->beep_mask) >> 16) & 0xff);
@@ -544,31 +527,8 @@ store_beep_mask(struct device *dev, struct device_attribute *attr,
return count;
}
-static ssize_t
-store_beep_enable(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct w83781d_data *data = dev_get_drvdata(dev);
- u32 val;
-
- val = simple_strtoul(buf, NULL, 10);
- if (val != 0 && val != 1)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
- data->beep_enable = val;
- val = w83781d_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
- val |= data->beep_enable << 7;
- w83781d_write_value(data, W83781D_REG_BEEP_INTS2, val);
- mutex_unlock(&data->update_lock);
-
- return count;
-}
-
static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
show_beep_mask, store_beep_mask);
-static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
- show_beep_enable, store_beep_enable);
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -584,10 +544,14 @@ store_beep(struct device *dev, struct device_attribute *attr,
{
struct w83781d_data *data = dev_get_drvdata(dev);
int bitnr = to_sensor_dev_attr(attr)->index;
- unsigned long bit;
u8 reg;
+ unsigned long bit;
+ int err;
+
+ err = kstrtoul(buf, 10, &bit);
+ if (err)
+ return err;
- bit = simple_strtoul(buf, NULL, 10);
if (bit & ~1)
return -EINVAL;
@@ -663,6 +627,8 @@ static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
show_beep, store_beep, 5);
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
show_temp3_beep, store_beep, 13);
+static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 15);
static ssize_t
show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
@@ -673,10 +639,12 @@ show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
(long) DIV_FROM_REG(data->fan_div[attr->index]));
}
-/* Note: we save and restore the fan minimum here, because its value is
- determined in part by the fan divisor. This follows the principle of
- least surprise; the user doesn't expect the fan minimum to change just
- because the divisor changed. */
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor. This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
static ssize_t
store_fan_div(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
@@ -686,7 +654,12 @@ store_fan_div(struct device *dev, struct device_attribute *da,
unsigned long min;
int nr = attr->index;
u8 reg;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
@@ -696,10 +669,12 @@ store_fan_div(struct device *dev, struct device_attribute *da,
data->fan_div[nr] = DIV_TO_REG(val, data->type);
- reg = (w83781d_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
- & (nr==0 ? 0xcf : 0x3f))
- | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
- w83781d_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+ reg = (w83781d_read_value(data, nr == 2 ?
+ W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+ & (nr == 0 ? 0xcf : 0x3f))
+ | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
+ w83781d_write_value(data, nr == 2 ?
+ W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
/* w83781d and as99127f don't have extended divisor bits */
if (data->type != w83781d && data->type != as99127f) {
@@ -746,12 +721,15 @@ store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = dev_get_drvdata(dev);
int nr = attr->index;
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
- data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ data->pwm[nr] = clamp_val(val, 0, 255);
w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -762,9 +740,13 @@ store_pwm2_enable(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct w83781d_data *data = dev_get_drvdata(dev);
- u32 val, reg;
+ unsigned long val;
+ u32 reg;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
@@ -814,9 +796,13 @@ store_sensor(struct device *dev, struct device_attribute *da,
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = dev_get_drvdata(dev);
int nr = attr->index;
- u32 val, tmp;
+ unsigned long val;
+ u32 tmp;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
@@ -840,8 +826,9 @@ store_sensor(struct device *dev, struct device_attribute *da,
data->sens[nr] = val;
break;
case W83781D_DEFAULT_BETA:
- dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
- "instead\n", W83781D_DEFAULT_BETA);
+ dev_warn(dev,
+ "Sensor type %d is deprecated, please use 4 instead\n",
+ W83781D_DEFAULT_BETA);
/* fall through */
case 4: /* thermistor */
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
@@ -866,45 +853,21 @@ static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
show_sensor, store_sensor, 2);
-/* I2C devices get this name attribute automatically, but for ISA devices
- we must create it by ourselves. */
-static ssize_t
-show_name(struct device *dev, struct device_attribute *devattr, char *buf)
-{
- struct w83781d_data *data = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", data->client.name);
-}
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-
-/* This function is called when:
- * w83781d_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and w83781d_driver is still present) */
-static int
-w83781d_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, w83781d_detect);
-}
-
-/* Assumes that adapter is of I2C, not ISA variety.
+/*
+ * Assumes that adapter is of I2C, not ISA variety.
* OTHERWISE DON'T CALL THIS
*/
static int
-w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
- struct i2c_client *new_client)
+w83781d_detect_subclients(struct i2c_client *new_client)
{
int i, val1 = 0, id;
int err;
- const char *client_name = "";
+ int address = new_client->addr;
+ unsigned short sc_addr[2];
+ struct i2c_adapter *adapter = new_client->adapter;
struct w83781d_data *data = i2c_get_clientdata(new_client);
-
- data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(data->lm75[0])) {
- err = -ENOMEM;
- goto ERROR_SC_0;
- }
+ enum chips kind = data->type;
+ int num_sc = 1;
id = i2c_adapter_id(adapter);
@@ -912,8 +875,8 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
- dev_err(&new_client->dev, "Invalid subclient "
- "address %d; must be 0x48-0x4f\n",
+ dev_err(&new_client->dev,
+ "Invalid subclient address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -EINVAL;
goto ERROR_SC_1;
@@ -922,73 +885,49 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
(force_subclients[2] & 0x07) |
((force_subclients[3] & 0x07) << 4));
- data->lm75[0]->addr = force_subclients[2];
+ sc_addr[0] = force_subclients[2];
} else {
val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
- data->lm75[0]->addr = 0x48 + (val1 & 0x07);
+ sc_addr[0] = 0x48 + (val1 & 0x07);
}
if (kind != w83783s) {
- data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!(data->lm75[1])) {
- err = -ENOMEM;
- goto ERROR_SC_1;
- }
-
+ num_sc = 2;
if (force_subclients[0] == id &&
force_subclients[1] == address) {
- data->lm75[1]->addr = force_subclients[3];
+ sc_addr[1] = force_subclients[3];
} else {
- data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
+ sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
}
- if (data->lm75[0]->addr == data->lm75[1]->addr) {
+ if (sc_addr[0] == sc_addr[1]) {
dev_err(&new_client->dev,
"Duplicate addresses 0x%x for subclients.\n",
- data->lm75[0]->addr);
+ sc_addr[0]);
err = -EBUSY;
goto ERROR_SC_2;
}
}
- if (kind == w83781d)
- client_name = "w83781d subclient";
- else if (kind == w83782d)
- client_name = "w83782d subclient";
- else if (kind == w83783s)
- client_name = "w83783s subclient";
- else if (kind == as99127f)
- client_name = "as99127f subclient";
-
- for (i = 0; i <= 1; i++) {
- /* store all data in w83781d */
- i2c_set_clientdata(data->lm75[i], NULL);
- data->lm75[i]->adapter = adapter;
- data->lm75[i]->driver = &w83781d_driver;
- data->lm75[i]->flags = 0;
- strlcpy(data->lm75[i]->name, client_name,
- I2C_NAME_SIZE);
- if ((err = i2c_attach_client(data->lm75[i]))) {
- dev_err(&new_client->dev, "Subclient %d "
- "registration at address 0x%x "
- "failed.\n", i, data->lm75[i]->addr);
+ for (i = 0; i < num_sc; i++) {
+ data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
+ if (!data->lm75[i]) {
+ dev_err(&new_client->dev,
+ "Subclient %d registration at address 0x%x failed.\n",
+ i, sc_addr[i]);
+ err = -ENOMEM;
if (i == 1)
goto ERROR_SC_3;
goto ERROR_SC_2;
}
- if (kind == w83783s)
- break;
}
return 0;
/* Undo inits in case of errors */
ERROR_SC_3:
- i2c_detach_client(data->lm75[0]);
+ i2c_unregister_device(data->lm75[0]);
ERROR_SC_2:
- kfree(data->lm75[1]);
ERROR_SC_1:
- kfree(data->lm75[0]);
-ERROR_SC_0:
return err;
}
@@ -1013,7 +952,7 @@ ERROR_SC_0:
&sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \
&sensor_dev_attr_temp##X##_beep.dev_attr.attr
-static struct attribute* w83781d_attributes[] = {
+static struct attribute *w83781d_attributes[] = {
IN_UNIT_ATTRS(0),
IN_UNIT_ATTRS(2),
IN_UNIT_ATTRS(3),
@@ -1029,30 +968,65 @@ static struct attribute* w83781d_attributes[] = {
&dev_attr_vrm.attr,
&dev_attr_alarms.attr,
&dev_attr_beep_mask.attr,
- &dev_attr_beep_enable.attr,
+ &sensor_dev_attr_beep_enable.dev_attr.attr,
NULL
};
static const struct attribute_group w83781d_group = {
.attrs = w83781d_attributes,
};
-static struct attribute *w83781d_attributes_opt[] = {
+static struct attribute *w83781d_attributes_in1[] = {
IN_UNIT_ATTRS(1),
+ NULL
+};
+static const struct attribute_group w83781d_group_in1 = {
+ .attrs = w83781d_attributes_in1,
+};
+
+static struct attribute *w83781d_attributes_in78[] = {
IN_UNIT_ATTRS(7),
IN_UNIT_ATTRS(8),
+ NULL
+};
+static const struct attribute_group w83781d_group_in78 = {
+ .attrs = w83781d_attributes_in78,
+};
+
+static struct attribute *w83781d_attributes_temp3[] = {
TEMP_UNIT_ATTRS(3),
+ NULL
+};
+static const struct attribute_group w83781d_group_temp3 = {
+ .attrs = w83781d_attributes_temp3,
+};
+
+static struct attribute *w83781d_attributes_pwm12[] = {
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
+ &dev_attr_pwm2_enable.attr,
+ NULL
+};
+static const struct attribute_group w83781d_group_pwm12 = {
+ .attrs = w83781d_attributes_pwm12,
+};
+
+static struct attribute *w83781d_attributes_pwm34[] = {
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm4.dev_attr.attr,
- &dev_attr_pwm2_enable.attr,
+ NULL
+};
+static const struct attribute_group w83781d_group_pwm34 = {
+ .attrs = w83781d_attributes_pwm34,
+};
+
+static struct attribute *w83781d_attributes_other[] = {
&sensor_dev_attr_temp1_type.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
NULL
};
-static const struct attribute_group w83781d_group_opt = {
- .attrs = w83781d_attributes_opt,
+static const struct attribute_group w83781d_group_other = {
+ .attrs = w83781d_attributes_other,
};
/* No clean up is done on error, it's up to the caller */
@@ -1061,56 +1035,23 @@ w83781d_create_files(struct device *dev, int kind, int is_isa)
{
int err;
- if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group);
+ if (err)
return err;
if (kind != w83783s) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_in1_input.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in1_min.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in1_max.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in1_alarm.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in1_beep.dev_attr)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
+ if (err)
return err;
}
if (kind != as99127f && kind != w83781d && kind != w83783s) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_in7_input.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in7_min.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in7_max.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in7_alarm.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in7_beep.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in8_input.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in8_min.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in8_max.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in8_alarm.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_in8_beep.dev_attr)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
+ if (err)
return err;
}
if (kind != w83783s) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_temp3_input.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_temp3_max.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_temp3_max_hyst.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_temp3_alarm.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_temp3_beep.dev_attr)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
+ if (err)
return err;
if (kind != w83781d) {
@@ -1123,286 +1064,181 @@ w83781d_create_files(struct device *dev, int kind, int is_isa)
}
if (kind != w83781d && kind != as99127f) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm1.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm2.dev_attr))
- || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
+ if (err)
return err;
}
if (kind == w83782d && !is_isa) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm3.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm4.dev_attr)))
+ err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
+ if (err)
return err;
}
if (kind != as99127f && kind != w83781d) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_temp1_type.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_temp2_type.dev_attr)))
+ err = device_create_file(dev,
+ &sensor_dev_attr_temp1_type.dev_attr);
+ if (err)
+ return err;
+ err = device_create_file(dev,
+ &sensor_dev_attr_temp2_type.dev_attr);
+ if (err)
return err;
if (kind != w83783s) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_temp3_type.dev_attr)))
+ err = device_create_file(dev,
+ &sensor_dev_attr_temp3_type.dev_attr);
+ if (err)
return err;
}
}
- if (is_isa) {
- err = device_create_file(&pdev->dev, &dev_attr_name);
- if (err)
- return err;
- }
-
return 0;
}
+/* Return 0 if detection is successful, -ENODEV otherwise */
static int
-w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
{
- int val1 = 0, val2;
- struct i2c_client *client;
- struct device *dev;
- struct w83781d_data *data;
- int err;
- const char *client_name = "";
+ int val1, val2;
+ struct w83781d_data *isa = w83781d_data_if_isa();
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
+ const char *client_name;
enum vendor { winbond, asus } vendid;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- err = -EINVAL;
- goto ERROR1;
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ /*
+ * We block updates of the ISA device to minimize the risk of
+ * concurrent access to the same W83781D chip through different
+ * interfaces.
+ */
+ if (isa)
+ mutex_lock(&isa->update_lock);
+
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 3\n");
+ goto err_nodev;
}
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access w83781d_{read,write}_value. */
-
- if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto ERROR1;
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ /* Check for Winbond or Asus ID if in bank 0 */
+ if (!(val1 & 0x07) &&
+ ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+ ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 4\n");
+ goto err_nodev;
}
-
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
- mutex_init(&data->lock);
- client->adapter = adapter;
- client->driver = &w83781d_driver;
- dev = &client->dev;
-
- /* Now, we do the remaining detection. */
-
- /* The w8378?d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (w83781d_read_value(data, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 3\n");
- err = -ENODEV;
- goto ERROR2;
- }
- val1 = w83781d_read_value(data, W83781D_REG_BANK);
- val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
- /* Check for Winbond or Asus ID if in bank 0 */
- if ((!(val1 & 0x07)) &&
- (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
- || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 4\n");
- err = -ENODEV;
- goto ERROR2;
- }
- /* If Winbond SMBus, check address at 0x48.
- Asus doesn't support, except for as99127f rev.2 */
- if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
- ((val1 & 0x80) && (val2 == 0x5c))) {
- if (w83781d_read_value
- (data, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 5\n");
- err = -ENODEV;
- goto ERROR2;
- }
+ /*
+ * If Winbond SMBus, check address at 0x48.
+ * Asus doesn't support, except for as99127f rev.2
+ */
+ if ((!(val1 & 0x80) && val2 == 0xa3) ||
+ ((val1 & 0x80) && val2 == 0x5c)) {
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+ != address) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 5\n");
+ goto err_nodev;
}
}
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
- w83781d_write_value(data, W83781D_REG_BANK,
- (w83781d_read_value(data, W83781D_REG_BANK)
- & 0x78) | 0x80);
-
- /* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
- if (val2 == 0x5c)
- vendid = winbond;
- else if (val2 == 0x12)
- vendid = asus;
- else {
- dev_dbg(&adapter->dev, "w83781d chip vendor is "
- "neither Winbond nor Asus\n");
- err = -ENODEV;
- goto ERROR2;
- }
-
- val1 = w83781d_read_value(data, W83781D_REG_WCHIPID);
- if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
- kind = w83781d;
- else if (val1 == 0x30 && vendid == winbond)
- kind = w83782d;
- else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
- kind = w83783s;
- else if (val1 == 0x31)
- kind = as99127f;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "Ignoring 'force' "
- "parameter for unknown chip at "
- "address 0x%02x\n", address);
- err = -EINVAL;
- goto ERROR2;
- }
+ /* Put it now into bank 0 and Vendor ID High Byte */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
+ & 0x78) | 0x80);
+
+ /* Get the vendor ID */
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ if (val2 == 0x5c)
+ vendid = winbond;
+ else if (val2 == 0x12)
+ vendid = asus;
+ else {
+ dev_dbg(&adapter->dev,
+ "w83781d chip vendor is neither Winbond nor Asus\n");
+ goto err_nodev;
}
- if (kind == w83781d) {
+ /* Determine the chip type. */
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+ if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
client_name = "w83781d";
- } else if (kind == w83782d) {
+ else if (val1 == 0x30 && vendid == winbond)
client_name = "w83782d";
- } else if (kind == w83783s) {
+ else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
client_name = "w83783s";
- } else if (kind == as99127f) {
+ else if (val1 == 0x31)
client_name = "as99127f";
- }
-
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, client_name, I2C_NAME_SIZE);
- data->type = kind;
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto ERROR2;
-
- /* attach secondary i2c lm75-like clients */
- if ((err = w83781d_detect_subclients(adapter, address,
- kind, client)))
- goto ERROR3;
+ else
+ goto err_nodev;
- /* Initialize the chip */
- w83781d_init_device(dev);
+ if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+ dev_dbg(&adapter->dev,
+ "Device at 0x%02x appears to be the same as ISA device\n",
+ address);
+ goto err_nodev;
+ }
- /* Register sysfs hooks */
- err = w83781d_create_files(dev, kind, 0);
- if (err)
- goto ERROR4;
+ if (isa)
+ mutex_unlock(&isa->update_lock);
- data->hwmon_dev = hwmon_device_register(dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto ERROR4;
- }
+ strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
-ERROR4:
- sysfs_remove_group(&dev->kobj, &w83781d_group);
- sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
-
- if (data->lm75[1]) {
- i2c_detach_client(data->lm75[1]);
- kfree(data->lm75[1]);
- }
- if (data->lm75[0]) {
- i2c_detach_client(data->lm75[0]);
- kfree(data->lm75[0]);
- }
-ERROR3:
- i2c_detach_client(client);
-ERROR2:
- kfree(data);
-ERROR1:
- return err;
+ err_nodev:
+ if (isa)
+ mutex_unlock(&isa->update_lock);
+ return -ENODEV;
}
-static int
-w83781d_detach_client(struct i2c_client *client)
+static void w83781d_remove_files(struct device *dev)
{
- struct w83781d_data *data = i2c_get_clientdata(client);
- int err;
-
- /* main client */
- if (data) {
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &w83781d_group);
- sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
- }
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- /* main client */
- if (data)
- kfree(data);
-
- /* subclient */
- else
- kfree(client);
-
- return 0;
+ sysfs_remove_group(&dev->kobj, &w83781d_group);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_other);
}
-static int __devinit
-w83781d_isa_probe(struct platform_device *pdev)
+static int
+w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
- int err, reg;
+ struct device *dev = &client->dev;
struct w83781d_data *data;
- struct resource *res;
- const char *name;
+ int err;
- /* Reserve the ISA region */
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
- "w83781d")) {
- err = -EBUSY;
- goto exit;
- }
+ data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit_release_region;
- }
+ i2c_set_clientdata(client, data);
mutex_init(&data->lock);
- data->client.addr = res->start;
- i2c_set_clientdata(&data->client, data);
- platform_set_drvdata(pdev, data);
+ mutex_init(&data->update_lock);
- reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
- switch (reg) {
- case 0x30:
- data->type = w83782d;
- name = "w83782d";
- break;
- default:
- data->type = w83781d;
- name = "w83781d";
- }
- strlcpy(data->client.name, name, I2C_NAME_SIZE);
+ data->type = id->driver_data;
+ data->client = client;
- /* Initialize the W83781D chip */
- w83781d_init_device(&pdev->dev);
+ /* attach secondary i2c lm75-like clients */
+ err = w83781d_detect_subclients(client);
+ if (err)
+ return err;
+
+ /* Initialize the chip */
+ w83781d_init_device(dev);
/* Register sysfs hooks */
- err = w83781d_create_files(&pdev->dev, data->type, 1);
+ err = w83781d_create_files(dev, data->type, 0);
if (err)
goto exit_remove_files;
- data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
@@ -1411,167 +1247,105 @@ w83781d_isa_probe(struct platform_device *pdev)
return 0;
exit_remove_files:
- sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
- sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
- device_remove_file(&pdev->dev, &dev_attr_name);
- kfree(data);
- exit_release_region:
- release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
- exit:
+ w83781d_remove_files(dev);
+ if (data->lm75[0])
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1])
+ i2c_unregister_device(data->lm75[1]);
return err;
}
-static int __devexit
-w83781d_isa_remove(struct platform_device *pdev)
+static int
+w83781d_remove(struct i2c_client *client)
{
- struct w83781d_data *data = platform_get_drvdata(pdev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
- sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
- device_remove_file(&pdev->dev, &dev_attr_name);
- release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
- kfree(data);
+ w83781d_remove_files(dev);
+
+ if (data->lm75[0])
+ i2c_unregister_device(data->lm75[0]);
+ if (data->lm75[1])
+ i2c_unregister_device(data->lm75[1]);
return 0;
}
-/* The SMBus locks itself, usually, but nothing may access the Winbond between
- bank switches. ISA access must always be locked explicitly!
- We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
- would slow down the W83781D access and should not be necessary.
- There are some ugly typecasts here, but the good news is - they should
- nowhere else be necessary! */
static int
-w83781d_read_value(struct w83781d_data *data, u16 reg)
+w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
{
- struct i2c_client *client = &data->client;
- int res, word_sized, bank;
+ struct i2c_client *client = data->client;
+ int res, bank;
struct i2c_client *cl;
- mutex_lock(&data->lock);
- if (!client->driver) { /* ISA device */
- word_sized = (((reg & 0xff00) == 0x100)
- || ((reg & 0xff00) == 0x200))
- && (((reg & 0x00ff) == 0x50)
- || ((reg & 0x00ff) == 0x53)
- || ((reg & 0x00ff) == 0x55));
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- client->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(reg >> 8,
- client->addr + W83781D_DATA_REG_OFFSET);
- }
- outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
- res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
- if (word_sized) {
- outb_p((reg & 0xff) + 1,
- client->addr + W83781D_ADDR_REG_OFFSET);
- res =
- (res << 8) + inb_p(client->addr +
- W83781D_DATA_REG_OFFSET);
- }
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- client->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
- }
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
} else {
- bank = (reg >> 8) & 0x0f;
- if (bank > 2)
- /* switch banks */
- i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
- bank);
- if (bank == 0 || bank > 2) {
- res = i2c_smbus_read_byte_data(client, reg & 0xff);
- } else {
- /* switch to subclient */
- cl = data->lm75[bank - 1];
- /* convert from ISA to LM75 I2C addresses */
- switch (reg & 0xff) {
- case 0x50: /* TEMP */
- res = swab16(i2c_smbus_read_word_data(cl, 0));
- break;
- case 0x52: /* CONFIG */
- res = i2c_smbus_read_byte_data(cl, 1);
- break;
- case 0x53: /* HYST */
- res = swab16(i2c_smbus_read_word_data(cl, 2));
- break;
- case 0x55: /* OVER */
- default:
- res = swab16(i2c_smbus_read_word_data(cl, 3));
- break;
- }
+ /* switch to subclient */
+ cl = data->lm75[bank - 1];
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x50: /* TEMP */
+ res = i2c_smbus_read_word_swapped(cl, 0);
+ break;
+ case 0x52: /* CONFIG */
+ res = i2c_smbus_read_byte_data(cl, 1);
+ break;
+ case 0x53: /* HYST */
+ res = i2c_smbus_read_word_swapped(cl, 2);
+ break;
+ case 0x55: /* OVER */
+ default:
+ res = i2c_smbus_read_word_swapped(cl, 3);
+ break;
}
- if (bank > 2)
- i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
}
- mutex_unlock(&data->lock);
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+
return res;
}
static int
-w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
{
- struct i2c_client *client = &data->client;
- int word_sized, bank;
+ struct i2c_client *client = data->client;
+ int bank;
struct i2c_client *cl;
- mutex_lock(&data->lock);
- if (!client->driver) { /* ISA device */
- word_sized = (((reg & 0xff00) == 0x100)
- || ((reg & 0xff00) == 0x200))
- && (((reg & 0x00ff) == 0x53)
- || ((reg & 0x00ff) == 0x55));
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- client->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(reg >> 8,
- client->addr + W83781D_DATA_REG_OFFSET);
- }
- outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
- if (word_sized) {
- outb_p(value >> 8,
- client->addr + W83781D_DATA_REG_OFFSET);
- outb_p((reg & 0xff) + 1,
- client->addr + W83781D_ADDR_REG_OFFSET);
- }
- outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- client->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
- }
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ i2c_smbus_write_byte_data(client, reg & 0xff,
+ value & 0xff);
} else {
- bank = (reg >> 8) & 0x0f;
- if (bank > 2)
- /* switch banks */
- i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
- bank);
- if (bank == 0 || bank > 2) {
- i2c_smbus_write_byte_data(client, reg & 0xff,
- value & 0xff);
- } else {
- /* switch to subclient */
- cl = data->lm75[bank - 1];
- /* convert from ISA to LM75 I2C addresses */
- switch (reg & 0xff) {
- case 0x52: /* CONFIG */
- i2c_smbus_write_byte_data(cl, 1, value & 0xff);
- break;
- case 0x53: /* HYST */
- i2c_smbus_write_word_data(cl, 2, swab16(value));
- break;
- case 0x55: /* OVER */
- i2c_smbus_write_word_data(cl, 3, swab16(value));
- break;
- }
+ /* switch to subclient */
+ cl = data->lm75[bank - 1];
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x52: /* CONFIG */
+ i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+ break;
+ case 0x53: /* HYST */
+ i2c_smbus_write_word_swapped(cl, 2, value);
+ break;
+ case 0x55: /* OVER */
+ i2c_smbus_write_word_swapped(cl, 3, value);
+ break;
}
- if (bank > 2)
- i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
}
- mutex_unlock(&data->lock);
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+
return 0;
}
@@ -1583,35 +1357,47 @@ w83781d_init_device(struct device *dev)
int type = data->type;
u8 tmp;
- if (reset && type != as99127f) { /* this resets registers we don't have
- documentation for on the as99127f */
- /* Resetting the chip has been the default for a long time,
- but it causes the BIOS initializations (fan clock dividers,
- thermal sensor types...) to be lost, so it is now optional.
- It might even go away if nobody reports it as being useful,
- as I see very little reason why this would be needed at
- all. */
- dev_info(dev, "If reset=1 solved a problem you were "
- "having, please report!\n");
+ if (reset && type != as99127f) { /*
+ * this resets registers we don't have
+ * documentation for on the as99127f
+ */
+ /*
+ * Resetting the chip has been the default for a long time,
+ * but it causes the BIOS initializations (fan clock dividers,
+ * thermal sensor types...) to be lost, so it is now optional.
+ * It might even go away if nobody reports it as being useful,
+ * as I see very little reason why this would be needed at
+ * all.
+ */
+ dev_info(dev,
+ "If reset=1 solved a problem you were having, please report!\n");
/* save these registers */
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
+ /*
+ * Reset all except Watchdog values and last conversion values
+ * This sets fan-divs to 2, among others
+ */
w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
- /* Restore the registers and disable power-on abnormal beep.
- This saves FAN 1/2/3 input/output values set by BIOS. */
+ /*
+ * Restore the registers and disable power-on abnormal beep.
+ * This saves FAN 1/2/3 input/output values set by BIOS.
+ */
w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
- /* Disable master beep-enable (reset turns it on).
- Individual beep_mask should be reset to off but for some reason
- disabling this bit helps some people not get beeped */
+ /*
+ * Disable master beep-enable (reset turns it on).
+ * Individual beep_mask should be reset to off but for some
+ * reason disabling this bit helps some people not get beeped
+ */
w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
}
- /* Disable power-on abnormal beep, as advised by the datasheet.
- Already done if reset=1. */
+ /*
+ * Disable power-on abnormal beep, as advised by the datasheet.
+ * Already done if reset=1.
+ */
if (init && !reset && type != as99127f) {
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
@@ -1641,8 +1427,8 @@ w83781d_init_device(struct device *dev)
/* Enable temp2 */
tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp2, readings "
- "might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp2, readings might not make sense\n");
w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
tmp & 0xfe);
}
@@ -1652,8 +1438,8 @@ w83781d_init_device(struct device *dev)
tmp = w83781d_read_value(data,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp3, "
- "readings might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp3, readings might not make sense\n");
w83781d_write_value(data,
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
@@ -1678,7 +1464,7 @@ w83781d_init_device(struct device *dev)
static struct w83781d_data *w83781d_update_device(struct device *dev)
{
struct w83781d_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = &data->client;
+ struct i2c_client *client = data->client;
int i;
mutex_lock(&data->update_lock);
@@ -1710,13 +1496,14 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
data->pwm[i] =
w83781d_read_value(data,
W83781D_REG_PWM[i]);
- if ((data->type != w83782d || !client->driver)
+ /* Only W83782D on SMBus has PWM3 and PWM4 */
+ if ((data->type != w83782d || !client)
&& i == 1)
break;
}
/* Only PWM2 can be disabled */
data->pwm2_enable = (w83781d_read_value(data,
- W83781D_REG_PWMCLK12) & 0x08) >> 3;
+ W83781D_REG_PWMCLK12) & 0x08) >> 3;
}
data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
@@ -1767,16 +1554,17 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
| (w83781d_read_value(data,
W83782D_REG_ALARM2) << 8);
} else {
- /* No real-time status registers, fall back to
- interrupt status registers */
+ /*
+ * No real-time status registers, fall back to
+ * interrupt status registers
+ */
data->alarms = w83781d_read_value(data,
W83781D_REG_ALARM1)
| (w83781d_read_value(data,
W83781D_REG_ALARM2) << 8);
}
i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
- data->beep_enable = i >> 7;
- data->beep_mask = ((i & 0x7f) << 8) +
+ data->beep_mask = (i << 8) +
w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
if ((data->type != w83781d) && (data->type != as99127f)) {
data->beep_mask |=
@@ -1792,48 +1580,319 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
return data;
}
-/* return 1 if a supported chip is found, 0 otherwise */
-static int __init
-w83781d_isa_found(unsigned short address)
+static const struct i2c_device_id w83781d_ids[] = {
+ { "w83781d", w83781d, },
+ { "w83782d", w83782d, },
+ { "w83783s", w83783s, },
+ { "as99127f", as99127f },
+ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, w83781d_ids);
+
+static struct i2c_driver w83781d_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "w83781d",
+ },
+ .probe = w83781d_probe,
+ .remove = w83781d_remove,
+ .id_table = w83781d_ids,
+ .detect = w83781d_detect,
+ .address_list = normal_i2c,
+};
+
+/*
+ * ISA related code
+ */
+#ifdef CONFIG_ISA
+
+/* ISA device, if found */
+static struct platform_device *pdev;
+
+static unsigned short isa_address = 0x290;
+
+/*
+ * I2C devices get this name attribute automatically, but for ISA devices
+ * we must create it by ourselves.
+ */
+static ssize_t
+show_name(struct device *dev, struct device_attribute *devattr, char *buf)
{
- int val, save, found = 0;
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
- /* We have to request the region in two parts because some
- boards declare base+4 to base+7 as a PNP device */
- if (!request_region(address, 4, "w83781d")) {
- pr_debug("w83781d: Failed to request low part of region\n");
+static struct w83781d_data *w83781d_data_if_isa(void)
+{
+ return pdev ? platform_get_drvdata(pdev) : NULL;
+}
+
+/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
+static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
+{
+ struct w83781d_data *isa;
+ int i;
+
+ if (!pdev) /* No ISA chip */
return 0;
+
+ isa = platform_get_drvdata(pdev);
+
+ if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
+ return 0; /* Address doesn't match */
+ if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
+ return 0; /* Chip type doesn't match */
+
+ /*
+ * We compare all the limit registers, the config register and the
+ * interrupt mask registers
+ */
+ for (i = 0x2b; i <= 0x3d; i++) {
+ if (w83781d_read_value(isa, i) !=
+ i2c_smbus_read_byte_data(client, i))
+ return 0;
}
- if (!request_region(address + 4, 4, "w83781d")) {
- pr_debug("w83781d: Failed to request high part of region\n");
- release_region(address, 4);
+ if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
+ i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
return 0;
+ for (i = 0x43; i <= 0x46; i++) {
+ if (w83781d_read_value(isa, i) !=
+ i2c_smbus_read_byte_data(client, i))
+ return 0;
+ }
+
+ return 1;
+}
+
+static int
+w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
+{
+ int word_sized, res;
+
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x50)
+ || ((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ data->isa_addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ res =
+ (res << 8) + inb_p(data->isa_addr +
+ W83781D_DATA_REG_OFFSET);
+ }
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
+ }
+ return res;
+}
+
+static void
+w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
+{
+ int word_sized;
+
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ data->isa_addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8,
+ data->isa_addr + W83781D_DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ data->isa_addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
+ }
+}
+
+/*
+ * The SMBus locks itself, usually, but nothing may access the Winbond between
+ * bank switches. ISA access must always be locked explicitly!
+ * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the W83781D access and should not be necessary.
+ * There are some ugly typecasts here, but the good news is - they should
+ * nowhere else be necessary!
+ */
+static int
+w83781d_read_value(struct w83781d_data *data, u16 reg)
+{
+ struct i2c_client *client = data->client;
+ int res;
+
+ mutex_lock(&data->lock);
+ if (client)
+ res = w83781d_read_value_i2c(data, reg);
+ else
+ res = w83781d_read_value_isa(data, reg);
+ mutex_unlock(&data->lock);
+ return res;
+}
+
+static int
+w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+{
+ struct i2c_client *client = data->client;
+
+ mutex_lock(&data->lock);
+ if (client)
+ w83781d_write_value_i2c(data, reg, value);
+ else
+ w83781d_write_value_isa(data, reg, value);
+ mutex_unlock(&data->lock);
+ return 0;
+}
+
+static int
+w83781d_isa_probe(struct platform_device *pdev)
+{
+ int err, reg;
+ struct w83781d_data *data;
+ struct resource *res;
+
+ /* Reserve the ISA region */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(&pdev->dev,
+ res->start + W83781D_ADDR_REG_OFFSET, 2,
+ "w83781d"))
+ return -EBUSY;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ mutex_init(&data->lock);
+ data->isa_addr = res->start;
+ platform_set_drvdata(pdev, data);
+
+ reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
+ switch (reg) {
+ case 0x30:
+ data->type = w83782d;
+ data->name = "w83782d";
+ break;
+ default:
+ data->type = w83781d;
+ data->name = "w83781d";
+ }
+
+ /* Initialize the W83781D chip */
+ w83781d_init_device(&pdev->dev);
+
+ /* Register sysfs hooks */
+ err = w83781d_create_files(&pdev->dev, data->type, 1);
+ if (err)
+ goto exit_remove_files;
+
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ goto exit_remove_files;
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+ exit_remove_files:
+ w83781d_remove_files(&pdev->dev);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ return err;
+}
+
+static int
+w83781d_isa_remove(struct platform_device *pdev)
+{
+ struct w83781d_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ w83781d_remove_files(&pdev->dev);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+
+ return 0;
+}
+
+static struct platform_driver w83781d_isa_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "w83781d",
+ },
+ .probe = w83781d_isa_probe,
+ .remove = w83781d_isa_remove,
+};
+
+/* return 1 if a supported chip is found, 0 otherwise */
+static int __init
+w83781d_isa_found(unsigned short address)
+{
+ int val, save, found = 0;
+ int port;
+
+ /*
+ * Some boards declare base+0 to base+7 as a PNP device, some base+4
+ * to base+7 and some base+5 to base+6. So we better request each port
+ * individually for the probing phase.
+ */
+ for (port = address; port < address + W83781D_EXTENT; port++) {
+ if (!request_region(port, 1, "w83781d")) {
+ pr_debug("Failed to request port 0x%x\n", port);
+ goto release;
+ }
}
#define REALLY_SLOW_IO
- /* We need the timeouts for at least some W83781D-like
- chips. But only if we read 'undefined' registers. */
+ /*
+ * We need the timeouts for at least some W83781D-like
+ * chips. But only if we read 'undefined' registers.
+ */
val = inb_p(address + 1);
if (inb_p(address + 2) != val
|| inb_p(address + 3) != val
|| inb_p(address + 7) != val) {
- pr_debug("w83781d: Detection failed at step 1\n");
+ pr_debug("Detection failed at step %d\n", 1);
goto release;
}
#undef REALLY_SLOW_IO
- /* We should be able to change the 7 LSB of the address port. The
- MSB (busy flag) should be clear initially, set after the write. */
+ /*
+ * We should be able to change the 7 LSB of the address port. The
+ * MSB (busy flag) should be clear initially, set after the write.
+ */
save = inb_p(address + W83781D_ADDR_REG_OFFSET);
if (save & 0x80) {
- pr_debug("w83781d: Detection failed at step 2\n");
+ pr_debug("Detection failed at step %d\n", 2);
goto release;
}
val = ~save & 0x7f;
outb_p(val, address + W83781D_ADDR_REG_OFFSET);
if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
outb_p(save, address + W83781D_ADDR_REG_OFFSET);
- pr_debug("w83781d: Detection failed at step 3\n");
+ pr_debug("Detection failed at step %d\n", 3);
goto release;
}
@@ -1841,7 +1900,7 @@ w83781d_isa_found(unsigned short address)
outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val & 0x80) {
- pr_debug("w83781d: Detection failed at step 4\n");
+ pr_debug("Detection failed at step %d\n", 4);
goto release;
}
outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
@@ -1850,19 +1909,19 @@ w83781d_isa_found(unsigned short address)
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if ((!(save & 0x80) && (val != 0xa3))
|| ((save & 0x80) && (val != 0x5c))) {
- pr_debug("w83781d: Detection failed at step 5\n");
+ pr_debug("Detection failed at step %d\n", 5);
goto release;
}
outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
- pr_debug("w83781d: Detection failed at step 6\n");
+ pr_debug("Detection failed at step %d\n", 6);
goto release;
}
/* The busy flag should be clear again */
if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
- pr_debug("w83781d: Detection failed at step 7\n");
+ pr_debug("Detection failed at step %d\n", 7);
goto release;
}
@@ -1877,12 +1936,12 @@ w83781d_isa_found(unsigned short address)
found = 1;
if (found)
- pr_info("w83781d: Found a %s chip at %#x\n",
+ pr_info("Found a %s chip at %#x\n",
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
- release_region(address + 4, 4);
- release_region(address, 4);
+ for (port--; port >= address; port--)
+ release_region(port, 1);
return found;
}
@@ -1900,21 +1959,19 @@ w83781d_isa_device_add(unsigned short address)
pdev = platform_device_alloc("w83781d", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "w83781d: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "w83781d: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
@@ -1928,18 +1985,14 @@ w83781d_isa_device_add(unsigned short address)
}
static int __init
-sensors_w83781d_init(void)
+w83781d_isa_register(void)
{
int res;
- res = i2c_add_driver(&w83781d_driver);
- if (res)
- goto exit;
-
if (w83781d_isa_found(isa_address)) {
res = platform_driver_register(&w83781d_isa_driver);
if (res)
- goto exit_unreg_i2c_driver;
+ goto exit;
/* Sets global pdev as a side effect */
res = w83781d_isa_device_add(isa_address);
@@ -1949,21 +2002,96 @@ sensors_w83781d_init(void)
return 0;
- exit_unreg_isa_driver:
+exit_unreg_isa_driver:
platform_driver_unregister(&w83781d_isa_driver);
- exit_unreg_i2c_driver:
- i2c_del_driver(&w83781d_driver);
- exit:
+exit:
return res;
}
-static void __exit
-sensors_w83781d_exit(void)
+static void
+w83781d_isa_unregister(void)
{
if (pdev) {
platform_device_unregister(pdev);
platform_driver_unregister(&w83781d_isa_driver);
}
+}
+#else /* !CONFIG_ISA */
+
+static struct w83781d_data *w83781d_data_if_isa(void)
+{
+ return NULL;
+}
+
+static int
+w83781d_alias_detect(struct i2c_client *client, u8 chipid)
+{
+ return 0;
+}
+
+static int
+w83781d_read_value(struct w83781d_data *data, u16 reg)
+{
+ int res;
+
+ mutex_lock(&data->lock);
+ res = w83781d_read_value_i2c(data, reg);
+ mutex_unlock(&data->lock);
+
+ return res;
+}
+
+static int
+w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+{
+ mutex_lock(&data->lock);
+ w83781d_write_value_i2c(data, reg, value);
+ mutex_unlock(&data->lock);
+
+ return 0;
+}
+
+static int __init
+w83781d_isa_register(void)
+{
+ return 0;
+}
+
+static void
+w83781d_isa_unregister(void)
+{
+}
+#endif /* CONFIG_ISA */
+
+static int __init
+sensors_w83781d_init(void)
+{
+ int res;
+
+ /*
+ * We register the ISA device first, so that we can skip the
+ * registration of an I2C interface to the same device.
+ */
+ res = w83781d_isa_register();
+ if (res)
+ goto exit;
+
+ res = i2c_add_driver(&w83781d_driver);
+ if (res)
+ goto exit_unreg_isa;
+
+ return 0;
+
+ exit_unreg_isa:
+ w83781d_isa_unregister();
+ exit:
+ return res;
+}
+
+static void __exit
+sensors_w83781d_exit(void)
+{
+ w83781d_isa_unregister();
i2c_del_driver(&w83781d_driver);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-10 17:28:53 +0000