aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon/via686a.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/via686a.c')
-rw-r--r--drivers/hwmon/via686a.c1065
1 files changed, 586 insertions, 479 deletions
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 6f696f89717..babd732b4e1 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -1,63 +1,68 @@
/*
- via686a.c - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
-
- Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
- Mark Studebaker <mdsxyz123@yahoo.com>,
- and Bob Dougherty <bobd@stanford.edu>
- (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
- <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * via686a.c - Part of lm_sensors, Linux kernel modules
+ * for hardware monitoring
+ *
+ * Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ * Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ * Mark Studebaker <mdsxyz123@yahoo.com>,
+ * and Bob Dougherty <bobd@stanford.edu>
+ *
+ * (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
+ * <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
/*
- Supports the Via VT82C686A, VT82C686B south bridges.
- Reports all as a 686A.
- Warning - only supports a single device.
-*/
+ * Supports the Via VT82C686A, VT82C686B south bridges.
+ * Reports all as a 686A.
+ * Warning - only supports a single device.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
-/* If force_addr is set to anything different from 0, we forcibly enable
- the device at the given address. */
+/*
+ * If force_addr is set to anything different from 0, we forcibly enable
+ * the device at the given address.
+ */
static unsigned short force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short address;
+static struct platform_device *pdev;
/*
- The Via 686a southbridge has a LM78-like chip integrated on the same IC.
- This driver is a customized copy of lm78.c
-*/
+ * The Via 686a southbridge has a LM78-like chip integrated on the same IC.
+ * This driver is a customized copy of lm78.c
+ */
/* Many VIA686A constants specified below */
@@ -89,117 +94,127 @@ static const u8 VIA686A_REG_TEMP_HYST[] = { 0x3a, 0x3e, 0x1e };
#define VIA686A_REG_ALARM2 0x42
#define VIA686A_REG_FANDIV 0x47
#define VIA686A_REG_CONFIG 0x40
-/* The following register sets temp interrupt mode (bits 1-0 for temp1,
- 3-2 for temp2, 5-4 for temp3). Modes are:
- 00 interrupt stays as long as value is out-of-range
- 01 interrupt is cleared once register is read (default)
- 10 comparator mode- like 00, but ignores hysteresis
- 11 same as 00 */
+/*
+ * The following register sets temp interrupt mode (bits 1-0 for temp1,
+ * 3-2 for temp2, 5-4 for temp3). Modes are:
+ * 00 interrupt stays as long as value is out-of-range
+ * 01 interrupt is cleared once register is read (default)
+ * 10 comparator mode- like 00, but ignores hysteresis
+ * 11 same as 00
+ */
#define VIA686A_REG_TEMP_MODE 0x4b
/* We'll just assume that you want to set all 3 simultaneously: */
#define VIA686A_TEMP_MODE_MASK 0x3F
#define VIA686A_TEMP_MODE_CONTINUOUS 0x00
-/* Conversions. Limit checking is only done on the TO_REG
- variants.
-
-********* VOLTAGE CONVERSIONS (Bob Dougherty) ********
- From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
- voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp
- voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V
- voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V
- voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V
- voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V
- in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
- That is:
- volts = (25*regVal+133)*factor
- regVal = (volts/factor-133)/25
- (These conversions were contributed by Jonathan Teh Soon Yew
- <j.teh@iname.com>) */
-static inline u8 IN_TO_REG(long val, int inNum)
+/*
+ * Conversions. Limit checking is only done on the TO_REG
+ * variants.
+ *
+ ******** VOLTAGE CONVERSIONS (Bob Dougherty) ********
+ * From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
+ * voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp
+ * voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V
+ * voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V
+ * voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V
+ * voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V
+ * in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
+ * That is:
+ * volts = (25*regVal+133)*factor
+ * regVal = (volts/factor-133)/25
+ * (These conversions were contributed by Jonathan Teh Soon Yew
+ * <j.teh@iname.com>)
+ */
+static inline u8 IN_TO_REG(long val, int in_num)
{
- /* To avoid floating point, we multiply constants by 10 (100 for +12V).
- Rounding is done (120500 is actually 133000 - 12500).
- Remember that val is expressed in 0.001V/bit, which is why we divide
- by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
- for the constants. */
- if (inNum <= 1)
- return (u8)
- SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255);
- else if (inNum == 2)
- return (u8)
- SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255);
- else if (inNum == 3)
- return (u8)
- SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255);
+ /*
+ * To avoid floating point, we multiply constants by 10 (100 for +12V).
+ * Rounding is done (120500 is actually 133000 - 12500).
+ * Remember that val is expressed in 0.001V/bit, which is why we divide
+ * by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
+ * for the constants.
+ */
+ if (in_num <= 1)
+ return (u8) clamp_val((val * 21024 - 1205000) / 250000, 0, 255);
+ else if (in_num == 2)
+ return (u8) clamp_val((val * 15737 - 1205000) / 250000, 0, 255);
+ else if (in_num == 3)
+ return (u8) clamp_val((val * 10108 - 1205000) / 250000, 0, 255);
else
- return (u8)
- SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255);
+ return (u8) clamp_val((val * 41714 - 12050000) / 2500000, 0,
+ 255);
}
-static inline long IN_FROM_REG(u8 val, int inNum)
+static inline long IN_FROM_REG(u8 val, int in_num)
{
- /* To avoid floating point, we multiply constants by 10 (100 for +12V).
- We also multiply them by 1000 because we want 0.001V/bit for the
- output value. Rounding is done. */
- if (inNum <= 1)
+ /*
+ * To avoid floating point, we multiply constants by 10 (100 for +12V).
+ * We also multiply them by 1000 because we want 0.001V/bit for the
+ * output value. Rounding is done.
+ */
+ if (in_num <= 1)
return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024);
- else if (inNum == 2)
+ else if (in_num == 2)
return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737);
- else if (inNum == 3)
+ else if (in_num == 3)
return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108);
else
return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714);
}
/********* FAN RPM CONVERSIONS ********/
-/* Higher register values = slower fans (the fan's strobe gates a counter).
- But this chip saturates back at 0, not at 255 like all the other chips.
- So, 0 means 0 RPM */
+/*
+ * Higher register values = slower fans (the fan's strobe gates a counter).
+ * But this chip saturates back at 0, not at 255 like all the other chips.
+ * So, 0 means 0 RPM
+ */
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 0;
- rpm = SENSORS_LIMIT(rpm, 1, 1000000);
- return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
}
-#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div)))
+#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (val) == 255 ? 0 : 1350000 / \
+ ((val) * (div)))
/******** TEMP CONVERSIONS (Bob Dougherty) *********/
-/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
- if(temp<169)
- return double(temp)*0.427-32.08;
- else if(temp>=169 && temp<=202)
- return double(temp)*0.582-58.16;
- else
- return double(temp)*0.924-127.33;
-
- A fifth-order polynomial fits the unofficial data (provided by Alex van
- Kaam <darkside@chello.nl>) a bit better. It also give more reasonable
- numbers on my machine (ie. they agree with what my BIOS tells me).
- Here's the fifth-order fit to the 8-bit data:
- temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
- 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
-
- (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
- finding my typos in this formula!)
-
- Alas, none of the elegant function-fit solutions will work because we
- aren't allowed to use floating point in the kernel and doing it with
- integers doesn't provide enough precision. So we'll do boring old
- look-up table stuff. The unofficial data (see below) have effectively
- 7-bit resolution (they are rounded to the nearest degree). I'm assuming
- that the transfer function of the device is monotonic and smooth, so a
- smooth function fit to the data will allow us to get better precision.
- I used the 5th-order poly fit described above and solved for
- VIA register values 0-255. I *10 before rounding, so we get tenth-degree
- precision. (I could have done all 1024 values for our 10-bit readings,
- but the function is very linear in the useful range (0-80 deg C), so
- we'll just use linear interpolation for 10-bit readings.) So, tempLUT
- is the temp at via register values 0-255: */
-static const s16 tempLUT[] =
-{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
+/*
+ * linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
+ * if(temp<169)
+ * return double(temp)*0.427-32.08;
+ * else if(temp>=169 && temp<=202)
+ * return double(temp)*0.582-58.16;
+ * else
+ * return double(temp)*0.924-127.33;
+ *
+ * A fifth-order polynomial fits the unofficial data (provided by Alex van
+ * Kaam <darkside@chello.nl>) a bit better. It also give more reasonable
+ * numbers on my machine (ie. they agree with what my BIOS tells me).
+ * Here's the fifth-order fit to the 8-bit data:
+ * temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
+ * 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
+ *
+ * (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
+ * finding my typos in this formula!)
+ *
+ * Alas, none of the elegant function-fit solutions will work because we
+ * aren't allowed to use floating point in the kernel and doing it with
+ * integers doesn't provide enough precision. So we'll do boring old
+ * look-up table stuff. The unofficial data (see below) have effectively
+ * 7-bit resolution (they are rounded to the nearest degree). I'm assuming
+ * that the transfer function of the device is monotonic and smooth, so a
+ * smooth function fit to the data will allow us to get better precision.
+ * I used the 5th-order poly fit described above and solved for
+ * VIA register values 0-255. I *10 before rounding, so we get tenth-degree
+ * precision. (I could have done all 1024 values for our 10-bit readings,
+ * but the function is very linear in the useful range (0-80 deg C), so
+ * we'll just use linear interpolation for 10-bit readings.) So, temp_lut
+ * is the temp at via register values 0-255:
+ */
+static const s16 temp_lut[] = {
+ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
-255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
@@ -223,29 +238,31 @@ static const s16 tempLUT[] =
1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
};
-/* the original LUT values from Alex van Kaam <darkside@chello.nl>
- (for via register values 12-240):
-{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
--30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
--15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
--3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
-12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
-22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
-33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
-45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
-61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
-85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
-
-
- Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed
- an extra term for a good fit to these inverse data!) and then
- solving for each temp value from -50 to 110 (the useable range for
- this chip). Here's the fit:
- viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
- - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
- Note that n=161: */
-static const u8 viaLUT[] =
-{ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
+/*
+ * the original LUT values from Alex van Kaam <darkside@chello.nl>
+ * (for via register values 12-240):
+ * {-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
+ * -30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
+ * -15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
+ * -3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
+ * 12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
+ * 22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
+ * 33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
+ * 45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
+ * 61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
+ * 85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
+ *
+ *
+ * Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed
+ * an extra term for a good fit to these inverse data!) and then
+ * solving for each temp value from -50 to 110 (the useable range for
+ * this chip). Here's the fit:
+ * viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
+ * - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
+ * Note that n=161:
+ */
+static const u8 via_lut[] = {
+ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
@@ -260,43 +277,47 @@ static const u8 viaLUT[] =
239, 240
};
-/* Converting temps to (8-bit) hyst and over registers
- No interpolation here.
- The +50 is because the temps start at -50 */
+/*
+ * Converting temps to (8-bit) hyst and over registers
+ * No interpolation here.
+ * The +50 is because the temps start at -50
+ */
static inline u8 TEMP_TO_REG(long val)
{
- return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 :
+ return via_lut[val <= -50000 ? 0 : val >= 110000 ? 160 :
(val < 0 ? val - 500 : val + 500) / 1000 + 50];
}
/* for 8-bit temperature hyst and over registers */
-#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100)
+#define TEMP_FROM_REG(val) ((long)temp_lut[val] * 100)
/* for 10-bit temperature readings */
static inline long TEMP_FROM_REG10(u16 val)
{
- u16 eightBits = val >> 2;
- u16 twoBits = val & 3;
+ u16 eight_bits = val >> 2;
+ u16 two_bits = val & 3;
/* no interpolation for these */
- if (twoBits == 0 || eightBits == 255)
- return TEMP_FROM_REG(eightBits);
+ if (two_bits == 0 || eight_bits == 255)
+ return TEMP_FROM_REG(eight_bits);
/* do some linear interpolation */
- return (tempLUT[eightBits] * (4 - twoBits) +
- tempLUT[eightBits + 1] * twoBits) * 25;
+ return (temp_lut[eight_bits] * (4 - two_bits) +
+ temp_lut[eight_bits + 1] * two_bits) * 25;
}
#define DIV_FROM_REG(val) (1 << (val))
-#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
+#define DIV_TO_REG(val) ((val) == 8 ? 3 : (val) == 4 ? 2 : (val) == 1 ? 0 : 1)
-/* For the VIA686A, we need to keep some data in memory.
- The structure is dynamically allocated, at the same time when a new
- via686a client is allocated. */
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
struct via686a_data {
- struct i2c_client client;
- struct class_device *class_dev;
- struct semaphore update_lock;
+ unsigned short addr;
+ const char *name;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -314,98 +335,95 @@ struct via686a_data {
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
-static int via686a_detect(struct i2c_adapter *adapter);
-static int via686a_detach_client(struct i2c_client *client);
+static int via686a_probe(struct platform_device *pdev);
+static int via686a_remove(struct platform_device *pdev);
-static inline int via686a_read_value(struct i2c_client *client, u8 reg)
+static inline int via686a_read_value(struct via686a_data *data, u8 reg)
{
- return (inb_p(client->addr + reg));
+ return inb_p(data->addr + reg);
}
-static inline void via686a_write_value(struct i2c_client *client, u8 reg,
+static inline void via686a_write_value(struct via686a_data *data, u8 reg,
u8 value)
{
- outb_p(value, client->addr + reg);
+ outb_p(value, data->addr + reg);
}
static struct via686a_data *via686a_update_device(struct device *dev);
-static void via686a_init_client(struct i2c_client *client);
+static void via686a_init_device(struct via686a_data *data);
/* following are the sysfs callback functions */
/* 7 voltage sensors */
-static ssize_t show_in(struct device *dev, char *buf, int nr) {
+static ssize_t show_in(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr));
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr) {
+static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr));
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
+static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
- via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
+ via686a_write_value(data, VIA686A_REG_IN_MIN(nr),
data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
+static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
- via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
+ via686a_write_value(data, VIA686A_REG_IN_MAX(nr),
data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_in_offset(offset) \
-static ssize_t \
- show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static ssize_t \
- show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t \
- show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in##offset##_max, set_in##offset##_max);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
show_in_offset(0);
show_in_offset(1);
@@ -414,416 +432,504 @@ show_in_offset(3);
show_in_offset(4);
/* 3 temperatures */
-static ssize_t show_temp(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr]));
}
-static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr]));
}
-static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr]));
}
-static ssize_t set_temp_over(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+static ssize_t set_temp_over(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ long val;
+ int err;
- down(&data->update_lock);
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
data->temp_over[nr] = TEMP_TO_REG(val);
- via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr],
+ via686a_write_value(data, VIA686A_REG_TEMP_OVER[nr],
data->temp_over[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_temp_hyst(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ long val;
+ int err;
- down(&data->update_lock);
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
data->temp_hyst[nr] = TEMP_TO_REG(val);
- via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr],
+ via686a_write_value(data, VIA686A_REG_TEMP_HYST[nr],
data->temp_hyst[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_temp_offset(offset) \
-static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp(dev, buf, offset - 1); \
-} \
-static ssize_t \
-show_temp_##offset##_over (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_over(dev, buf, offset - 1); \
-} \
-static ssize_t \
-show_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_hyst(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_over (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_over(dev, buf, count, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_hyst(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\
-static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_over, set_temp_##offset##_over); \
-static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_hyst, set_temp_##offset##_hyst);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_over, set_temp_over, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp_hyst, set_temp_hyst, offset - 1);
show_temp_offset(1);
show_temp_offset(2);
show_temp_offset(3);
/* 2 Fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
- DIV_FROM_REG(data->fan_div[nr])) );
+ DIV_FROM_REG(data->fan_div[nr])));
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
return sprintf(buf, "%d\n",
- FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+ FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
}
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr) {
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
+ char *buf) {
struct via686a_data *data = via686a_update_device(dev);
- return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
}
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
+ unsigned long val;
+ int err;
- down(&data->update_lock);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
- up(&data->update_lock);
+ via686a_write_value(data, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+ mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t set_fan_div(struct device *dev, const char *buf,
- size_t count, int nr) {
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count) {
+ struct via686a_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int nr = attr->index;
int old;
+ unsigned long val;
+ int err;
- down(&data->update_lock);
- old = via686a_read_value(client, VIA686A_REG_FANDIV);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ old = via686a_read_value(data, VIA686A_REG_FANDIV);
data->fan_div[nr] = DIV_TO_REG(val);
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
- via686a_write_value(client, VIA686A_REG_FANDIV, old);
- up(&data->update_lock);
+ via686a_write_value(data, VIA686A_REG_FANDIV, old);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_div(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_div, set_fan_##offset##_div);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1);
show_fan_offset(1);
show_fan_offset(2);
/* Alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) {
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
struct via686a_data *data = via686a_update_device(dev);
return sprintf(buf, "%u\n", data->alarms);
}
+
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-/* The driver. I choose to use type i2c_driver, as at is identical to both
- smbus_driver and isa_driver, and clients could be of either kind */
-static struct i2c_driver via686a_driver = {
- .owner = THIS_MODULE,
- .name = "via686a",
- .attach_adapter = via686a_detect,
- .detach_client = via686a_detach_client,
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct via686a_data *data = via686a_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct via686a_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct attribute *via686a_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+
+ &dev_attr_alarms.attr,
+ &dev_attr_name.attr,
+ NULL
+};
+
+static const struct attribute_group via686a_group = {
+ .attrs = via686a_attributes,
+};
+
+static struct platform_driver via686a_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "via686a",
+ },
+ .probe = via686a_probe,
+ .remove = via686a_remove,
};
/* This is called when the module is loaded */
-static int via686a_detect(struct i2c_adapter *adapter)
+static int via686a_probe(struct platform_device *pdev)
{
- struct i2c_client *new_client;
struct via686a_data *data;
- int err = 0;
- const char client_name[] = "via686a";
- u16 val;
-
- /* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr) {
- address = force_addr & 0xFF00;
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
- address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_BASE_REG, address))
- return -ENODEV;
- }
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
- return -ENODEV;
- if (!(val & 0x0001)) {
- if (force_addr) {
- dev_info(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
- return -ENODEV;
- } else {
- dev_warn(&adapter->dev, "sensors disabled - enable "
- "with force_addr=0x%x\n", address);
- return -ENODEV;
- }
- }
+ struct resource *res;
+ int err;
/* Reserve the ISA region */
- if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) {
- dev_err(&adapter->dev, "region 0x%x already in use!\n",
- address);
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(&pdev->dev, res->start, VIA686A_EXTENT,
+ via686a_driver.driver.name)) {
+ dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
+ (unsigned long)res->start, (unsigned long)res->end);
return -ENODEV;
}
- if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit_release;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &via686a_driver;
- new_client->flags = 0;
-
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ data = devm_kzalloc(&pdev->dev, sizeof(struct via686a_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- data->valid = 0;
- init_MUTEX(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
+ platform_set_drvdata(pdev, data);
+ data->addr = res->start;
+ data->name = "via686a";
+ mutex_init(&data->update_lock);
/* Initialize the VIA686A chip */
- via686a_init_client(new_client);
+ via686a_init_device(data);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
- goto exit_detach;
- }
+ err = sysfs_create_group(&pdev->dev.kobj, &via686a_group);
+ if (err)
+ return err;
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp2_input);
- device_create_file(&new_client->dev, &dev_attr_temp3_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp2_max);
- device_create_file(&new_client->dev, &dev_attr_temp3_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst);
- device_create_file(&new_client->dev, &dev_attr_fan1_input);
- device_create_file(&new_client->dev, &dev_attr_fan2_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_min);
- device_create_file(&new_client->dev, &dev_attr_fan2_min);
- device_create_file(&new_client->dev, &dev_attr_fan1_div);
- device_create_file(&new_client->dev, &dev_attr_fan2_div);
- device_create_file(&new_client->dev, &dev_attr_alarms);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
return 0;
-exit_detach:
- i2c_detach_client(new_client);
-exit_free:
- kfree(data);
-exit_release:
- release_region(address, VIA686A_EXTENT);
+exit_remove_files:
+ sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
return err;
}
-static int via686a_detach_client(struct i2c_client *client)
+static int via686a_remove(struct platform_device *pdev)
{
- struct via686a_data *data = i2c_get_clientdata(client);
- int err;
-
- hwmon_device_unregister(data->class_dev);
-
- if ((err = i2c_detach_client(client)))
- return err;
+ struct via686a_data *data = platform_get_drvdata(pdev);
- release_region(client->addr, VIA686A_EXTENT);
- kfree(data);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
return 0;
}
-static void via686a_init_client(struct i2c_client *client)
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+ int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = reg >> 6;
+}
+
+static void via686a_init_device(struct via686a_data *data)
{
u8 reg;
/* Start monitoring */
- reg = via686a_read_value(client, VIA686A_REG_CONFIG);
- via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F);
+ reg = via686a_read_value(data, VIA686A_REG_CONFIG);
+ via686a_write_value(data, VIA686A_REG_CONFIG, (reg | 0x01) & 0x7F);
/* Configure temp interrupt mode for continuous-interrupt operation */
- via686a_write_value(client, VIA686A_REG_TEMP_MODE,
- via686a_read_value(client, VIA686A_REG_TEMP_MODE) &
- !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS));
+ reg = via686a_read_value(data, VIA686A_REG_TEMP_MODE);
+ via686a_write_value(data, VIA686A_REG_TEMP_MODE,
+ (reg & ~VIA686A_TEMP_MODE_MASK)
+ | VIA686A_TEMP_MODE_CONTINUOUS);
+
+ /* Pre-read fan clock divisor values */
+ via686a_update_fan_div(data);
}
static struct via686a_data *via686a_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct via686a_data *data = i2c_get_clientdata(client);
+ struct via686a_data *data = dev_get_drvdata(dev);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
for (i = 0; i <= 4; i++) {
data->in[i] =
- via686a_read_value(client, VIA686A_REG_IN(i));
- data->in_min[i] = via686a_read_value(client,
+ via686a_read_value(data, VIA686A_REG_IN(i));
+ data->in_min[i] = via686a_read_value(data,
VIA686A_REG_IN_MIN
(i));
data->in_max[i] =
- via686a_read_value(client, VIA686A_REG_IN_MAX(i));
+ via686a_read_value(data, VIA686A_REG_IN_MAX(i));
}
for (i = 1; i <= 2; i++) {
data->fan[i - 1] =
- via686a_read_value(client, VIA686A_REG_FAN(i));
- data->fan_min[i - 1] = via686a_read_value(client,
+ via686a_read_value(data, VIA686A_REG_FAN(i));
+ data->fan_min[i - 1] = via686a_read_value(data,
VIA686A_REG_FAN_MIN(i));
}
for (i = 0; i <= 2; i++) {
- data->temp[i] = via686a_read_value(client,
+ data->temp[i] = via686a_read_value(data,
VIA686A_REG_TEMP[i]) << 2;
data->temp_over[i] =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_TEMP_OVER[i]);
data->temp_hyst[i] =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_TEMP_HYST[i]);
}
- /* add in lower 2 bits
- temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
- temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
- temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
+ /*
+ * add in lower 2 bits
+ * temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
+ * temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
+ * temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
*/
- data->temp[0] |= (via686a_read_value(client,
+ data->temp[0] |= (via686a_read_value(data,
VIA686A_REG_TEMP_LOW1)
& 0xc0) >> 6;
data->temp[1] |=
- (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+ (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0x30) >> 4;
data->temp[2] |=
- (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+ (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
- i = via686a_read_value(client, VIA686A_REG_FANDIV);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = i >> 6;
+ via686a_update_fan_div(data);
data->alarms =
- via686a_read_value(client,
+ via686a_read_value(data,
VIA686A_REG_ALARM1) |
- (via686a_read_value(client, VIA686A_REG_ALARM2) << 8);
+ (via686a_read_value(data, VIA686A_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
-static struct pci_device_id via686a_pci_ids[] = {
+static const struct pci_device_id via686a_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
- { 0, }
+ { }
};
-
MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
-static int __devinit via686a_pci_probe(struct pci_dev *dev,
+static int via686a_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + VIA686A_EXTENT - 1,
+ .name = "via686a",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit;
+
+ pdev = platform_device_alloc("via686a", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ pr_err("Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ pr_err("Device addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int via686a_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address, val;
+ if (force_addr) {
+ address = force_addr & ~(VIA686A_EXTENT - 1);
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
+ return -ENODEV;
+ }
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(dev, VIA686A_BASE_REG, &val))
return -ENODEV;
address = val & ~(VIA686A_EXTENT - 1);
- if (address == 0 && force_addr == 0) {
- dev_err(&dev->dev, "base address not set - upgrade BIOS "
- "or use force_addr=0xaddr\n");
+ if (address == 0) {
+ dev_err(&dev->dev,
+ "base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
- s_bridge = pci_dev_get(dev);
- if (i2c_isa_add_driver(&via686a_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
+ return -ENODEV;
+ if (!(val & 0x0001)) {
+ if (!force_addr) {
+ dev_warn(&dev->dev,
+ "Sensors disabled, enable with force_addr=0x%x\n",
+ address);
+ return -ENODEV;
+ }
+
+ dev_warn(&dev->dev, "Enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
}
- /* Always return failure here. This is to allow other drivers to bind
+ if (platform_driver_register(&via686a_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (via686a_device_add(address))
+ goto exit_unregister;
+
+ /*
+ * Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&via686a_driver);
+exit:
return -ENODEV;
}
@@ -842,13 +948,14 @@ static void __exit sm_via686a_exit(void)
{
pci_unregister_driver(&via686a_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&via686a_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&via686a_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
}
-MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, "
+MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, "
"Mark Studebaker <mdsxyz123@yahoo.com> "
"and Bob Dougherty <bobd@stanford.edu>");
MODULE_DESCRIPTION("VIA 686A Sensor device");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-05 20:04:13 +0000