diff options
Diffstat (limited to 'drivers/hwmon/tmp102.c')
| -rw-r--r-- | drivers/hwmon/tmp102.c | 152 |
1 files changed, 70 insertions, 82 deletions
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 93187c3cb5e..51719956cc0 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -26,6 +26,9 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/thermal.h> +#include <linux/of.h> #define DRIVER_NAME "tmp102" @@ -48,26 +51,15 @@ #define TMP102_THIGH_REG 0x03 struct tmp102 { + struct i2c_client *client; struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex lock; u16 config_orig; unsigned long last_update; int temp[3]; }; -/* SMBus specifies low byte first, but the TMP102 returns high byte first, - * so we have to swab16 the values */ -static inline int tmp102_read_reg(struct i2c_client *client, u8 reg) -{ - int result = i2c_smbus_read_word_data(client, reg); - return result < 0 ? result : swab16(result); -} - -static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val) -{ - return i2c_smbus_write_word_data(client, reg, swab16(val)); -} - /* convert left adjusted 13-bit TMP102 register value to milliCelsius */ static inline int tmp102_reg_to_mC(s16 val) { @@ -86,15 +78,17 @@ static const u8 tmp102_reg[] = { TMP102_THIGH_REG, }; -static struct tmp102 *tmp102_update_device(struct i2c_client *client) +static struct tmp102 *tmp102_update_device(struct device *dev) { - struct tmp102 *tmp102 = i2c_get_clientdata(client); + struct tmp102 *tmp102 = dev_get_drvdata(dev); + struct i2c_client *client = tmp102->client; mutex_lock(&tmp102->lock); if (time_after(jiffies, tmp102->last_update + HZ / 3)) { int i; for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) { - int status = tmp102_read_reg(client, tmp102_reg[i]); + int status = i2c_smbus_read_word_swapped(client, + tmp102_reg[i]); if (status > -1) tmp102->temp[i] = tmp102_reg_to_mC(status); } @@ -104,12 +98,21 @@ static struct tmp102 *tmp102_update_device(struct i2c_client *client) return tmp102; } +static int tmp102_read_temp(void *dev, long *temp) +{ + struct tmp102 *tmp102 = tmp102_update_device(dev); + + *temp = tmp102->temp[0]; + + return 0; +} + static ssize_t tmp102_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); - struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev)); + struct tmp102 *tmp102 = tmp102_update_device(dev); return sprintf(buf, "%d\n", tmp102->temp[sda->index]); } @@ -119,19 +122,19 @@ static ssize_t tmp102_set_temp(struct device *dev, const char *buf, size_t count) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); - struct i2c_client *client = to_i2c_client(dev); - struct tmp102 *tmp102 = i2c_get_clientdata(client); + struct tmp102 *tmp102 = dev_get_drvdata(dev); + struct i2c_client *client = tmp102->client; long val; int status; - if (strict_strtol(buf, 10, &val) < 0) + if (kstrtol(buf, 10, &val) < 0) return -EINVAL; - val = SENSORS_LIMIT(val, -256000, 255000); + val = clamp_val(val, -256000, 255000); mutex_lock(&tmp102->lock); tmp102->temp[sda->index] = val; - status = tmp102_write_reg(client, tmp102_reg[sda->index], - tmp102_mC_to_reg(val)); + status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index], + tmp102_mC_to_reg(val)); mutex_unlock(&tmp102->lock); return status ? : count; } @@ -144,110 +147,105 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp, static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp, tmp102_set_temp, 2); -static struct attribute *tmp102_attributes[] = { +static struct attribute *tmp102_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, NULL }; - -static const struct attribute_group tmp102_attr_group = { - .attrs = tmp102_attributes, -}; +ATTRIBUTE_GROUPS(tmp102); #define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1) #define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL) -static int __devinit tmp102_probe(struct i2c_client *client, +static int tmp102_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; + struct device *hwmon_dev; struct tmp102 *tmp102; int status; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { - dev_err(&client->dev, "adapter doesnt support SMBus word " - "transactions\n"); + dev_err(dev, + "adapter doesn't support SMBus word transactions\n"); return -ENODEV; } - tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL); - if (!tmp102) { - dev_dbg(&client->dev, "kzalloc failed\n"); + tmp102 = devm_kzalloc(dev, sizeof(*tmp102), GFP_KERNEL); + if (!tmp102) return -ENOMEM; - } + i2c_set_clientdata(client, tmp102); + tmp102->client = client; - status = tmp102_read_reg(client, TMP102_CONF_REG); + status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); if (status < 0) { - dev_err(&client->dev, "error reading config register\n"); - goto fail_free; + dev_err(dev, "error reading config register\n"); + return status; } tmp102->config_orig = status; - status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG); + status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, + TMP102_CONFIG); if (status < 0) { - dev_err(&client->dev, "error writing config register\n"); + dev_err(dev, "error writing config register\n"); goto fail_restore_config; } - status = tmp102_read_reg(client, TMP102_CONF_REG); + status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); if (status < 0) { - dev_err(&client->dev, "error reading config register\n"); + dev_err(dev, "error reading config register\n"); goto fail_restore_config; } status &= ~TMP102_CONFIG_RD_ONLY; if (status != TMP102_CONFIG) { - dev_err(&client->dev, "config settings did not stick\n"); + dev_err(dev, "config settings did not stick\n"); status = -ENODEV; goto fail_restore_config; } tmp102->last_update = jiffies - HZ; mutex_init(&tmp102->lock); - status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group); - if (status) { - dev_dbg(&client->dev, "could not create sysfs files\n"); + hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + tmp102, tmp102_groups); + if (IS_ERR(hwmon_dev)) { + dev_dbg(dev, "unable to register hwmon device\n"); + status = PTR_ERR(hwmon_dev); goto fail_restore_config; } - tmp102->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(tmp102->hwmon_dev)) { - dev_dbg(&client->dev, "unable to register hwmon device\n"); - status = PTR_ERR(tmp102->hwmon_dev); - goto fail_remove_sysfs; - } + tmp102->hwmon_dev = hwmon_dev; + tmp102->tz = thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, + tmp102_read_temp, NULL); + if (IS_ERR(tmp102->tz)) + tmp102->tz = NULL; - dev_info(&client->dev, "initialized\n"); + dev_info(dev, "initialized\n"); return 0; -fail_remove_sysfs: - sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); fail_restore_config: - tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig); -fail_free: - kfree(tmp102); - + i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, + tmp102->config_orig); return status; } -static int __devexit tmp102_remove(struct i2c_client *client) +static int tmp102_remove(struct i2c_client *client) { struct tmp102 *tmp102 = i2c_get_clientdata(client); + thermal_zone_of_sensor_unregister(tmp102->hwmon_dev, tmp102->tz); hwmon_device_unregister(tmp102->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); /* Stop monitoring if device was stopped originally */ if (tmp102->config_orig & TMP102_CONF_SD) { int config; - config = tmp102_read_reg(client, TMP102_CONF_REG); + config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); if (config >= 0) - tmp102_write_reg(client, TMP102_CONF_REG, - config | TMP102_CONF_SD); + i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, + config | TMP102_CONF_SD); } - kfree(tmp102); - return 0; } @@ -257,12 +255,12 @@ static int tmp102_suspend(struct device *dev) struct i2c_client *client = to_i2c_client(dev); int config; - config = tmp102_read_reg(client, TMP102_CONF_REG); + config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); if (config < 0) return config; config |= TMP102_CONF_SD; - return tmp102_write_reg(client, TMP102_CONF_REG, config); + return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config); } static int tmp102_resume(struct device *dev) @@ -270,12 +268,12 @@ static int tmp102_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); int config; - config = tmp102_read_reg(client, TMP102_CONF_REG); + config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); if (config < 0) return config; config &= ~TMP102_CONF_SD; - return tmp102_write_reg(client, TMP102_CONF_REG, config); + return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config); } static const struct dev_pm_ops tmp102_dev_pm_ops = { @@ -298,21 +296,11 @@ static struct i2c_driver tmp102_driver = { .driver.name = DRIVER_NAME, .driver.pm = TMP102_DEV_PM_OPS, .probe = tmp102_probe, - .remove = __devexit_p(tmp102_remove), + .remove = tmp102_remove, .id_table = tmp102_id, }; -static int __init tmp102_init(void) -{ - return i2c_add_driver(&tmp102_driver); -} -module_init(tmp102_init); - -static void __exit tmp102_exit(void) -{ - i2c_del_driver(&tmp102_driver); -} -module_exit(tmp102_exit); +module_i2c_driver(tmp102_driver); MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver"); |
