1 files changed, 219 insertions, 56 deletions

diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 2bc980006f8..81964412125 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -2,6 +2,7 @@
  * Hardware monitoring driver for ZL6100 and compatibles
  *
  * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,31 +29,111 @@
 #include <linux/delay.h>
 #include "pmbus.h"
 
-enum chips { zl2004, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 };
+enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105,
+	     zl9101, zl9117 };
 
 struct zl6100_data {
 	int id;
 	ktime_t access;		/* chip access time */
+	int delay;		/* Delay between chip accesses in uS */
 	struct pmbus_driver_info info;
 };
 
 #define to_zl6100_data(x)  container_of(x, struct zl6100_data, info)
 
+#define ZL6100_MFR_CONFIG		0xd0
 #define ZL6100_DEVICE_ID		0xe4
 
+#define ZL6100_MFR_XTEMP_ENABLE		(1 << 7)
+
+#define MFR_VMON_OV_FAULT_LIMIT		0xf5
+#define MFR_VMON_UV_FAULT_LIMIT		0xf6
+#define MFR_READ_VMON			0xf7
+
+#define VMON_UV_WARNING			(1 << 5)
+#define VMON_OV_WARNING			(1 << 4)
+#define VMON_UV_FAULT			(1 << 1)
+#define VMON_OV_FAULT			(1 << 0)
+
 #define ZL6100_WAIT_TIME		1000	/* uS	*/
 
 static ushort delay = ZL6100_WAIT_TIME;
 module_param(delay, ushort, 0644);
 MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
 
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+	s16 exponent;
+	s32 mantissa;
+	long val;
+
+	exponent = l >> 11;
+	mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+	val = mantissa;
+
+	/* scale result to milli-units */
+	val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	return val;
+}
+
+#define MAX_MANTISSA	(1023 * 1000)
+#define MIN_MANTISSA	(511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+	s16 exponent = 0, mantissa;
+	bool negative = false;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (val < 0) {
+		negative = true;
+		val = -val;
+	}
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val >= MAX_MANTISSA && exponent < 15) {
+		exponent++;
+		val >>= 1;
+	}
+	/* Increase small mantissa to improve precision */
+	while (val < MIN_MANTISSA && exponent > -15) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/* Ensure that resulting number is within range */
+	if (mantissa > 0x3ff)
+		mantissa = 0x3ff;
+
+	/* restore sign */
+	if (negative)
+		mantissa = -mantissa;
+
+	/* Convert to 5 bit exponent, 11 bit mantissa */
+	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
 /* Some chips need a delay between accesses */
 static inline void zl6100_wait(const struct zl6100_data *data)
 {
-	if (delay) {
+	if (data->delay) {
 		s64 delta = ktime_us_delta(ktime_get(), data->access);
-		if (delta < delay)
-			udelay(delay - delta);
+		if (delta < data->delay)
+			udelay(data->delay - delta);
 	}
 }
 
@@ -60,14 +141,57 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct zl6100_data *data = to_zl6100_data(info);
-	int ret;
+	int ret, vreg;
 
-	if (page || reg >= PMBUS_VIRT_BASE)
+	if (page > 0)
 		return -ENXIO;
 
+	if (data->id == zl2005) {
+		/*
+		 * Limit register detection is not reliable on ZL2005.
+		 * Make sure registers are not erroneously detected.
+		 */
+		switch (reg) {
+		case PMBUS_VOUT_OV_WARN_LIMIT:
+		case PMBUS_VOUT_UV_WARN_LIMIT:
+		case PMBUS_IOUT_OC_WARN_LIMIT:
+			return -ENXIO;
+		}
+	}
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		vreg = MFR_READ_VMON;
+		break;
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+	case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+	case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			return -ENXIO;
+		vreg = reg;
+		break;
+	}
+
 	zl6100_wait(data);
-	ret = pmbus_read_word_data(client, page, reg);
+	ret = pmbus_read_word_data(client, page, vreg);
 	data->access = ktime_get();
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+		break;
+	}
 
 	return ret;
 }
@@ -76,13 +200,35 @@ static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct zl6100_data *data = to_zl6100_data(info);
-	int ret;
+	int ret, status;
 
 	if (page > 0)
 		return -ENXIO;
 
 	zl6100_wait(data);
-	ret = pmbus_read_byte_data(client, page, reg);
+
+	switch (reg) {
+	case PMBUS_VIRT_STATUS_VMON:
+		ret = pmbus_read_byte_data(client, 0,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (ret < 0)
+			break;
+
+		status = 0;
+		if (ret & VMON_UV_WARNING)
+			status |= PB_VOLTAGE_UV_WARNING;
+		if (ret & VMON_OV_WARNING)
+			status |= PB_VOLTAGE_OV_WARNING;
+		if (ret & VMON_UV_FAULT)
+			status |= PB_VOLTAGE_UV_FAULT;
+		if (ret & VMON_OV_FAULT)
+			status |= PB_VOLTAGE_OV_FAULT;
+		ret = status;
+		break;
+	default:
+		ret = pmbus_read_byte_data(client, page, reg);
+		break;
+	}
 	data->access = ktime_get();
 
 	return ret;
@@ -93,13 +239,38 @@ static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 	struct zl6100_data *data = to_zl6100_data(info);
-	int ret;
+	int ret, vreg;
 
-	if (page || reg >= PMBUS_VIRT_BASE)
+	if (page > 0)
 		return -ENXIO;
 
+	switch (reg) {
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			return -ENXIO;
+		vreg = reg;
+	}
+
 	zl6100_wait(data);
-	ret = pmbus_write_word_data(client, page, reg, word);
+	ret = pmbus_write_word_data(client, page, vreg, word);
 	data->access = ktime_get();
 
 	return ret;
@@ -122,13 +293,21 @@ static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
 }
 
 static const struct i2c_device_id zl6100_id[] = {
+	{"bmr450", zl2005},
+	{"bmr451", zl2005},
+	{"bmr462", zl2008},
+	{"bmr463", zl2008},
+	{"bmr464", zl2008},
 	{"zl2004", zl2004},
+	{"zl2005", zl2005},
 	{"zl2006", zl2006},
 	{"zl2008", zl2008},
 	{"zl2105", zl2105},
 	{"zl2106", zl2106},
 	{"zl6100", zl6100},
 	{"zl6105", zl6105},
+	{"zl9101", zl9101},
+	{"zl9117", zl9117},
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, zl6100_id);
@@ -143,7 +322,7 @@ static int zl6100_probe(struct i2c_client *client,
 	const struct i2c_device_id *mid;
 
 	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     I2C_FUNC_SMBUS_READ_WORD_DATA
 				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
 		return -ENODEV;
 
@@ -170,32 +349,26 @@ static int zl6100_probe(struct i2c_client *client,
 			   "Device mismatch: Configured %s, detected %s\n",
 			   id->name, mid->name);
 
-	data = kzalloc(sizeof(struct zl6100_data), GFP_KERNEL);
+	data = devm_kzalloc(&client->dev, sizeof(struct zl6100_data),
+			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	data->id = mid->driver_data;
 
 	/*
-	 * ZL2008, ZL2105, and ZL6100 are known to require a wait time
-	 * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
-	 *
-	 * Only clear the wait time for chips known to be safe. The wait time
-	 * can be cleared later for additional chips if tests show that it
-	 * is not needed (in other words, better be safe than sorry).
+	 * According to information from the chip vendor, all currently
+	 * supported chips are known to require a wait time between I2C
+	 * accesses.
 	 */
-	if (data->id == zl2004 || data->id == zl6105)
-		delay = 0;
+	data->delay = delay;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before
 	 * accessing the chip again.
-	 * Set the timestamp, wait, then set it again. This should provide
-	 * enough buffer time to be safe.
 	 */
 	data->access = ktime_get();
 	zl6100_wait(data);
-	data->access = ktime_get();
 
 	info = &data->info;
 
@@ -203,31 +376,31 @@ static int zl6100_probe(struct i2c_client *client,
 	info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
 	  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 	  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
-	  | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+	  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+	/*
+	 * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
+	 * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+	 */
+	if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+		info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
+	ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	if (ret & ZL6100_MFR_XTEMP_ENABLE)
+		info->func[0] |= PMBUS_HAVE_TEMP2;
+
+	data->access = ktime_get();
+	zl6100_wait(data);
 
 	info->read_word_data = zl6100_read_word_data;
 	info->read_byte_data = zl6100_read_byte_data;
 	info->write_word_data = zl6100_write_word_data;
 	info->write_byte = zl6100_write_byte;
 
-	ret = pmbus_do_probe(client, mid, info);
-	if (ret)
-		goto err_mem;
-	return 0;
-
-err_mem:
-	kfree(data);
-	return ret;
-}
-
-static int zl6100_remove(struct i2c_client *client)
-{
-	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
-	const struct zl6100_data *data = to_zl6100_data(info);
-
-	pmbus_do_remove(client);
-	kfree(data);
-	return 0;
+	return pmbus_do_probe(client, mid, info);
 }
 
 static struct i2c_driver zl6100_driver = {
@@ -235,22 +408,12 @@ static struct i2c_driver zl6100_driver = {
 		   .name = "zl6100",
 		   },
 	.probe = zl6100_probe,
-	.remove = zl6100_remove,
+	.remove = pmbus_do_remove,
 	.id_table = zl6100_id,
 };
 
-static int __init zl6100_init(void)
-{
-	return i2c_add_driver(&zl6100_driver);
-}
-
-static void __exit zl6100_exit(void)
-{
-	i2c_del_driver(&zl6100_driver);
-}
+module_i2c_driver(zl6100_driver);
 
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
 MODULE_LICENSE("GPL");
-module_init(zl6100_init);
-module_exit(zl6100_exit);