1 files changed, 197 insertions, 225 deletions

diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 2fc034aeca0..162a520f4bd 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -105,39 +105,13 @@ module_param(clock, int, S_IRUGO);
 
 #define DIV_FROM_REG(reg) (1 << (reg & 7))
 
-static int max6650_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
-static int max6650_init_client(struct i2c_client *client);
-static int max6650_remove(struct i2c_client *client);
-static struct max6650_data *max6650_update_device(struct device *dev);
-
-/*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id max6650_id[] = {
-	{ "max6650", 1 },
-	{ "max6651", 4 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, max6650_id);
-
-static struct i2c_driver max6650_driver = {
-	.driver = {
-		.name	= "max6650",
-	},
-	.probe		= max6650_probe,
-	.remove		= max6650_remove,
-	.id_table	= max6650_id,
-};
-
 /*
  * Client data (each client gets its own)
  */
 
-struct max6650_data
-{
-	struct device *hwmon_dev;
+struct max6650_data {
+	struct i2c_client *client;
+	const struct attribute_group *groups[3];
 	struct mutex update_lock;
 	int nr_fans;
 	char valid; /* zero until following fields are valid */
@@ -152,6 +126,51 @@ struct max6650_data
 	u8 alarm;
 };
 
+static const u8 tach_reg[] = {
+	MAX6650_REG_TACH0,
+	MAX6650_REG_TACH1,
+	MAX6650_REG_TACH2,
+	MAX6650_REG_TACH3,
+};
+
+static struct max6650_data *max6650_update_device(struct device *dev)
+{
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		data->speed = i2c_smbus_read_byte_data(client,
+						       MAX6650_REG_SPEED);
+		data->config = i2c_smbus_read_byte_data(client,
+							MAX6650_REG_CONFIG);
+		for (i = 0; i < data->nr_fans; i++) {
+			data->tach[i] = i2c_smbus_read_byte_data(client,
+								 tach_reg[i]);
+		}
+		data->count = i2c_smbus_read_byte_data(client,
+							MAX6650_REG_COUNT);
+		data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
+
+		/*
+		 * Alarms are cleared on read in case the condition that
+		 * caused the alarm is removed. Keep the value latched here
+		 * for providing the register through different alarm files.
+		 */
+		data->alarm |= i2c_smbus_read_byte_data(client,
+							MAX6650_REG_ALARM);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
 static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
 		       char *buf)
 {
@@ -160,13 +179,13 @@ static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
 	int rpm;
 
 	/*
-	* Calculation details:
-	*
-	* Each tachometer counts over an interval given by the "count"
-	* register (0.25, 0.5, 1 or 2 seconds). This module assumes
-	* that the fans produce two pulses per revolution (this seems
-	* to be the most common).
-	*/
+	 * Calculation details:
+	 *
+	 * Each tachometer counts over an interval given by the "count"
+	 * register (0.25, 0.5, 1 or 2 seconds). This module assumes
+	 * that the fans produce two pulses per revolution (this seems
+	 * to be the most common).
+	 */
 
 	rpm = ((data->tach[attr->index] * 120) / DIV_FROM_REG(data->count));
 	return sprintf(buf, "%d\n", rpm);
@@ -220,12 +239,12 @@ static ssize_t get_target(struct device *dev, struct device_attribute *devattr,
 	int kscale, ktach, rpm;
 
 	/*
-	* Use the datasheet equation:
-	*
-	*    FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
-	*
-	* then multiply by 60 to give rpm.
-	*/
+	 * Use the datasheet equation:
+	 *
+	 *    FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
+	 *
+	 * then multiply by 60 to give rpm.
+	 */
 
 	kscale = DIV_FROM_REG(data->config);
 	ktach = data->speed;
@@ -236,19 +255,24 @@ static ssize_t get_target(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_target(struct device *dev, struct device_attribute *devattr,
 			 const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6650_data *data = i2c_get_clientdata(client);
-	int rpm = simple_strtoul(buf, NULL, 10);
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	int kscale, ktach;
+	unsigned long rpm;
+	int err;
+
+	err = kstrtoul(buf, 10, &rpm);
+	if (err)
+		return err;
 
-	rpm = SENSORS_LIMIT(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
+	rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
 
 	/*
-	* Divide the required speed by 60 to get from rpm to rps, then
-	* use the datasheet equation:
-	*
-	*     KTACH = [(fCLK x KSCALE) / (256 x FanSpeed)] - 1
-	*/
+	 * Divide the required speed by 60 to get from rpm to rps, then
+	 * use the datasheet equation:
+	 *
+	 *     KTACH = [(fCLK x KSCALE) / (256 x FanSpeed)] - 1
+	 */
 
 	mutex_lock(&data->update_lock);
 
@@ -282,8 +306,10 @@ static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr,
 	int pwm;
 	struct max6650_data *data = max6650_update_device(dev);
 
-	/* Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
-	   Lower DAC values mean higher speeds. */
+	/*
+	 * Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
+	 * Lower DAC values mean higher speeds.
+	 */
 	if (data->config & MAX6650_CFG_V12)
 		pwm = 255 - (255 * (int)data->dac)/180;
 	else
@@ -298,11 +324,16 @@ static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
 			const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6650_data *data = i2c_get_clientdata(client);
-	int pwm = simple_strtoul(buf, NULL, 10);
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long pwm;
+	int err;
+
+	err = kstrtoul(buf, 10, &pwm);
+	if (err)
+		return err;
 
-	pwm = SENSORS_LIMIT(pwm, 0, 255);
+	pwm = clamp_val(pwm, 0, 255);
 
 	mutex_lock(&data->update_lock);
 
@@ -339,16 +370,18 @@ static ssize_t get_enable(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_enable(struct device *dev, struct device_attribute *devattr,
 			  const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6650_data *data = i2c_get_clientdata(client);
-	int mode = simple_strtoul(buf, NULL, 10);
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	int max6650_modes[3] = {0, 3, 2};
+	unsigned long mode;
+	int err;
+
+	err = kstrtoul(buf, 10, &mode);
+	if (err)
+		return err;
 
-	if ((mode < 0)||(mode > 2)) {
-		dev_err(&client->dev,
-			"illegal value for pwm1_enable (%d)\n", mode);
+	if (mode > 2)
 		return -EINVAL;
-	}
 
 	mutex_lock(&data->update_lock);
 
@@ -387,9 +420,14 @@ static ssize_t get_div(struct device *dev, struct device_attribute *devattr,
 static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
 		       const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6650_data *data = i2c_get_clientdata(client);
-	int div = simple_strtoul(buf, NULL, 10);
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long div;
+	int err;
+
+	err = kstrtoul(buf, 10, &div);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	switch (div) {
@@ -407,8 +445,6 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
 		break;
 	default:
 		mutex_unlock(&data->update_lock);
-		dev_err(&client->dev,
-			"illegal value for fan divider (%d)\n", div);
 		return -EINVAL;
 	}
 
@@ -430,7 +466,7 @@ static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct max6650_data *data = max6650_update_device(dev);
-	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_client *client = data->client;
 	int alarm = 0;
 
 	if (data->alarm & attr->index) {
@@ -468,7 +504,8 @@ static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
 				    int n)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct i2c_client *client = to_i2c_client(dev);
+	struct max6650_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
 	struct device_attribute *devattr;
 
@@ -503,7 +540,7 @@ static struct attribute *max6650_attrs[] = {
 	NULL
 };
 
-static struct attribute_group max6650_attr_grp = {
+static const struct attribute_group max6650_group = {
 	.attrs = max6650_attrs,
 	.is_visible = max6650_attrs_visible,
 };
@@ -515,7 +552,7 @@ static struct attribute *max6651_attrs[] = {
 	NULL
 };
 
-static const struct attribute_group max6651_attr_grp = {
+static const struct attribute_group max6651_group = {
 	.attrs = max6651_attrs,
 };
 
@@ -523,144 +560,84 @@ static const struct attribute_group max6651_attr_grp = {
  * Real code
  */
 
-static int max6650_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int max6650_init_client(struct max6650_data *data,
+			       struct i2c_client *client)
 {
-	struct max6650_data *data;
-	int err;
-
-	if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) {
-		dev_err(&client->dev, "out of memory.\n");
-		return -ENOMEM;
-	}
-
-	i2c_set_clientdata(client, data);
-	mutex_init(&data->update_lock);
-	data->nr_fans = id->driver_data;
-
-	/*
-	 * Initialize the max6650 chip
-	 */
-	err = max6650_init_client(client);
-	if (err)
-		goto err_free;
-
-	err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp);
-	if (err)
-		goto err_free;
-	/* 3 additional fan inputs for the MAX6651 */
-	if (data->nr_fans == 4) {
-		err = sysfs_create_group(&client->dev.kobj, &max6651_attr_grp);
-		if (err)
-			goto err_remove;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (!IS_ERR(data->hwmon_dev))
-		return 0;
-
-	err = PTR_ERR(data->hwmon_dev);
-	dev_err(&client->dev, "error registering hwmon device.\n");
-	if (data->nr_fans == 4)
-		sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp);
-err_remove:
-	sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
-err_free:
-	kfree(data);
-	return err;
-}
-
-static int max6650_remove(struct i2c_client *client)
-{
-	struct max6650_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	if (data->nr_fans == 4)
-		sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp);
-	sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
-	kfree(data);
-	return 0;
-}
-
-static int max6650_init_client(struct i2c_client *client)
-{
-	struct max6650_data *data = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
 	int config;
 	int err = -EIO;
 
 	config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
 
 	if (config < 0) {
-		dev_err(&client->dev, "Error reading config, aborting.\n");
+		dev_err(dev, "Error reading config, aborting.\n");
 		return err;
 	}
 
 	switch (fan_voltage) {
-		case 0:
-			break;
-		case 5:
-			config &= ~MAX6650_CFG_V12;
-			break;
-		case 12:
-			config |= MAX6650_CFG_V12;
-			break;
-		default:
-			dev_err(&client->dev,
-				"illegal value for fan_voltage (%d)\n",
-				fan_voltage);
+	case 0:
+		break;
+	case 5:
+		config &= ~MAX6650_CFG_V12;
+		break;
+	case 12:
+		config |= MAX6650_CFG_V12;
+		break;
+	default:
+		dev_err(dev, "illegal value for fan_voltage (%d)\n",
+			fan_voltage);
 	}
 
-	dev_info(&client->dev, "Fan voltage is set to %dV.\n",
+	dev_info(dev, "Fan voltage is set to %dV.\n",
 		 (config & MAX6650_CFG_V12) ? 12 : 5);
 
 	switch (prescaler) {
-		case 0:
-			break;
-		case 1:
-			config &= ~MAX6650_CFG_PRESCALER_MASK;
-			break;
-		case 2:
-			config = (config & ~MAX6650_CFG_PRESCALER_MASK)
-				 | MAX6650_CFG_PRESCALER_2;
-			break;
-		case  4:
-			config = (config & ~MAX6650_CFG_PRESCALER_MASK)
-				 | MAX6650_CFG_PRESCALER_4;
-			break;
-		case  8:
-			config = (config & ~MAX6650_CFG_PRESCALER_MASK)
-				 | MAX6650_CFG_PRESCALER_8;
-			break;
-		case 16:
-			config = (config & ~MAX6650_CFG_PRESCALER_MASK)
-				 | MAX6650_CFG_PRESCALER_16;
-			break;
-		default:
-			dev_err(&client->dev,
-				"illegal value for prescaler (%d)\n",
-				prescaler);
+	case 0:
+		break;
+	case 1:
+		config &= ~MAX6650_CFG_PRESCALER_MASK;
+		break;
+	case 2:
+		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+			 | MAX6650_CFG_PRESCALER_2;
+		break;
+	case  4:
+		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+			 | MAX6650_CFG_PRESCALER_4;
+		break;
+	case  8:
+		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+			 | MAX6650_CFG_PRESCALER_8;
+		break;
+	case 16:
+		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+			 | MAX6650_CFG_PRESCALER_16;
+		break;
+	default:
+		dev_err(dev, "illegal value for prescaler (%d)\n", prescaler);
 	}
 
-	dev_info(&client->dev, "Prescaler is set to %d.\n",
+	dev_info(dev, "Prescaler is set to %d.\n",
 		 1 << (config & MAX6650_CFG_PRESCALER_MASK));
 
-	/* If mode is set to "full off", we change it to "open loop" and
+	/*
+	 * If mode is set to "full off", we change it to "open loop" and
 	 * set DAC to 255, which has the same effect. We do this because
-	 * there's no "full off" mode defined in hwmon specifcations.
+	 * there's no "full off" mode defined in hwmon specifications.
 	 */
 
 	if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) {
-		dev_dbg(&client->dev, "Change mode to open loop, full off.\n");
+		dev_dbg(dev, "Change mode to open loop, full off.\n");
 		config = (config & ~MAX6650_CFG_MODE_MASK)
 			 | MAX6650_CFG_MODE_OPEN_LOOP;
 		if (i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, 255)) {
-			dev_err(&client->dev, "DAC write error, aborting.\n");
+			dev_err(dev, "DAC write error, aborting.\n");
 			return err;
 		}
 	}
 
 	if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) {
-		dev_err(&client->dev, "Config write error, aborting.\n");
+		dev_err(dev, "Config write error, aborting.\n");
 		return err;
 	}
 
@@ -670,62 +647,57 @@ static int max6650_init_client(struct i2c_client *client)
 	return 0;
 }
 
-static const u8 tach_reg[] = {
-	MAX6650_REG_TACH0,
-	MAX6650_REG_TACH1,
-	MAX6650_REG_TACH2,
-	MAX6650_REG_TACH3,
-};
-
-static struct max6650_data *max6650_update_device(struct device *dev)
+static int max6650_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
-	int i;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6650_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
+	struct device *dev = &client->dev;
+	struct max6650_data *data;
+	struct device *hwmon_dev;
+	int err;
 
-	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
-		data->speed = i2c_smbus_read_byte_data(client,
-						       MAX6650_REG_SPEED);
-		data->config = i2c_smbus_read_byte_data(client,
-							MAX6650_REG_CONFIG);
-		for (i = 0; i < data->nr_fans; i++) {
-			data->tach[i] = i2c_smbus_read_byte_data(client,
-								 tach_reg[i]);
-		}
-		data->count = i2c_smbus_read_byte_data(client,
-							MAX6650_REG_COUNT);
-		data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
+	data = devm_kzalloc(dev, sizeof(struct max6650_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-		/* Alarms are cleared on read in case the condition that
-		 * caused the alarm is removed. Keep the value latched here
-		 * for providing the register through different alarm files. */
-		data->alarm |= i2c_smbus_read_byte_data(client,
-							MAX6650_REG_ALARM);
+	data->client = client;
+	mutex_init(&data->update_lock);
+	data->nr_fans = id->driver_data;
 
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
+	/*
+	 * Initialize the max6650 chip
+	 */
+	err = max6650_init_client(data, client);
+	if (err)
+		return err;
 
-	mutex_unlock(&data->update_lock);
+	data->groups[0] = &max6650_group;
+	/* 3 additional fan inputs for the MAX6651 */
+	if (data->nr_fans == 4)
+		data->groups[1] = &max6651_group;
 
-	return data;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+							   client->name, data,
+							   data->groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
-static int __init sensors_max6650_init(void)
-{
-	return i2c_add_driver(&max6650_driver);
-}
+static const struct i2c_device_id max6650_id[] = {
+	{ "max6650", 1 },
+	{ "max6651", 4 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6650_id);
 
-static void __exit sensors_max6650_exit(void)
-{
-	i2c_del_driver(&max6650_driver);
-}
+static struct i2c_driver max6650_driver = {
+	.driver = {
+		.name	= "max6650",
+	},
+	.probe		= max6650_probe,
+	.id_table	= max6650_id,
+};
+
+module_i2c_driver(max6650_driver);
 
 MODULE_AUTHOR("Hans J. Koch");
 MODULE_DESCRIPTION("MAX6650 sensor driver");
 MODULE_LICENSE("GPL");
-
-module_init(sensors_max6650_init);
-module_exit(sensors_max6650_exit);