diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 779 |
1 files changed, 506 insertions, 273 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6f1d167cb1e..02d3d85829f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -39,9 +39,22 @@ config HWMON_DEBUG_CHIP comment "Native drivers" +config SENSORS_AB8500 + tristate "AB8500 thermal monitoring" + depends on AB8500_GPADC && AB8500_BM + default n + help + If you say yes here you get support for the thermal sensor part + of the AB8500 chip. The driver includes thermal management for + AB8500 die and two GPADC channels. The GPADC channel are preferably + used to access sensors outside the AB8500 chip. + + This driver can also be built as a module. If so, the module + will be called abx500-temp. + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && DMI && EXPERIMENTAL + depends on X86 && DMI help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -56,7 +69,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && DMI && EXPERIMENTAL + depends on X86 && DMI help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -70,7 +83,7 @@ config SENSORS_ABITUGURU3 config SENSORS_AD7314 tristate "Analog Devices AD7314 and compatibles" - depends on SPI && EXPERIMENTAL + depends on SPI help If you say yes here you get support for the Analog Devices AD7314, ADT7301 and ADT7302 temperature sensors. @@ -80,7 +93,7 @@ config SENSORS_AD7314 config SENSORS_AD7414 tristate "Analog Devices AD7414" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices AD7414 temperature monitoring chip. @@ -90,7 +103,7 @@ config SENSORS_AD7414 config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices AD7416, AD7417 and AD7418 temperature monitoring chips. @@ -98,22 +111,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADCXX - tristate "National Semiconductor ADCxxxSxxx" - depends on SPI_MASTER && EXPERIMENTAL - help - If you say yes here you get support for the National Semiconductor - ADC<bb><c>S<sss> chip family, where - * bb is the resolution in number of bits (8, 10, 12) - * c is the number of channels (1, 2, 4, 8) - * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 - kSPS and 101 for 1 MSPS) - - Examples : ADC081S101, ADC124S501, ... - - This driver can also be built as a module. If so, the module - will be called adcxx. - config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -179,9 +176,39 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7X10 + tristate + help + This module contains common code shared by the ADT7310/ADT7320 and + ADT7410/ADT7420 temperature monitoring chip drivers. + + If build as a module, the module will be called adt7x10. + +config SENSORS_ADT7310 + tristate "Analog Devices ADT7310/ADT7320" + depends on SPI_MASTER + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7310 and ADT7320 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7310. + +config SENSORS_ADT7410 + tristate "Analog Devices ADT7410/ADT7420" + depends on I2C + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7410 and ADT7420 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7410. + config SENSORS_ADT7411 tristate "Analog Devices ADT7411" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices ADT7411 voltage and temperature monitoring chip. @@ -191,7 +218,7 @@ config SENSORS_ADT7411 config SENSORS_ADT7462 tristate "Analog Devices ADT7462" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices ADT7462 temperature monitoring chips. @@ -201,7 +228,7 @@ config SENSORS_ADT7462 config SENSORS_ADT7470 tristate "Analog Devices ADT7470" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. @@ -236,7 +263,7 @@ config SENSORS_ASC7621 config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" - depends on X86 && PCI && EXPERIMENTAL + depends on X86 && PCI help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported is whole AMD K8 @@ -253,8 +280,8 @@ config SENSORS_K10TEMP If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h, - 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) - microarchitectures. + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and + 16h (Kabini/Mullins) microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. @@ -269,9 +296,34 @@ config SENSORS_FAM15H_POWER This driver can also be built as a module. If so, the module will be called fam15h_power. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on X86 && I2C && EXPERIMENTAL + depends on X86 && I2C select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -282,7 +334,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID @@ -305,28 +357,43 @@ config SENSORS_DS620 will be called ds620. config SENSORS_DS1621 - tristate "Dallas Semiconductor DS1621 and DS1625" + tristate "Dallas Semiconductor DS1621 and compatibles" depends on I2C help - If you say yes here you get support for Dallas Semiconductor - DS1621 and DS1625 sensor chips. + If you say yes here you get support for Dallas Semiconductor/Maxim + Integrated DS1621 sensor chips and compatible models including: + + - Dallas Semiconductor DS1625 + - Maxim Integrated DS1631 + - Maxim Integrated DS1721 + - Maxim Integrated DS1731 This driver can also be built as a module. If so, the module will be called ds1621. -config SENSORS_EXYNOS4_TMU - tristate "Temperature sensor on Samsung EXYNOS4" - depends on ARCH_EXYNOS4 +config SENSORS_DA9052_ADC + tristate "Dialog DA9052/DA9053 ADC" + depends on PMIC_DA9052 help - If you say yes here you get support for TMU (Thermal Management - Unit) on SAMSUNG EXYNOS4 series of SoC. + Say y here to support the ADC found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. - This driver can also be built as a module. If so, the module - will be called exynos4-tmu. + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + +config SENSORS_DA9055 + tristate "Dialog Semiconductor DA9055 ADC" + depends on MFD_DA9055 + help + If you say yes here you get support for ADC on the Dialog + Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-hwmon. config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" - depends on PCI && EXPERIMENTAL + depends on PCI help If you say yes here you get support for FB-DIMM AMB temperature monitoring chips on systems with the Intel 5000 series chipset. @@ -377,6 +444,12 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -393,16 +466,6 @@ config SENSORS_FSCHMD This driver can also be built as a module. If so, the module will be called fschmd. -config SENSORS_G760A - tristate "GMT G760A" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G760A fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g760a. - config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -424,6 +487,26 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GPIO_FAN tristate "GPIO fan" depends on GPIOLIB @@ -433,13 +516,15 @@ config SENSORS_GPIO_FAN This driver can also be built as a module. If so, the module will be called gpio-fan. -config SENSORS_CORETEMP - tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 && PCI && EXPERIMENTAL +config SENSORS_HIH6130 + tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" + depends on I2C help - If you say yes here you get support for the temperature - sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. + If you say yes here you get support for Honeywell Humidicon + HIH-6130 and HIH-6131 Humidicon humidity sensors. + + This driver can also be built as a module. If so, the module + will be called hih6130. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" @@ -469,14 +554,32 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_IIO_HWMON + tristate "Hwmon driver that uses channels specified via iio maps" + depends on IIO + help + This is a platform driver that in combination with a suitable + map allows IIO devices to provide basic hwmon functionality + for those channels specified in the map. This map can be provided + either via platform data or the device tree bindings. + +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp for details. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on !PPC select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E - sensor chips, and the SiS960 clone. + IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, + IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips, + and the SiS950 clone. This driver can also be built as a module. If so, the module will be called it87. @@ -499,15 +602,15 @@ config SENSORS_JC42 temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, - MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, - STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. + MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), + STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. This driver can also be built as a module. If so, the module will be called jc42. config SENSORS_LINEAGE tristate "Lineage Compact Power Line Power Entry Module" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Lineage Compact Power Line series of DC/DC and AC/DC converters such as CP1800, CP2000AC, @@ -516,6 +619,219 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_HTU21 + tristate "Measurement Specialties HTU21D humidity/temperature sensors" + depends on I2C + help + If you say yes here you get support for the Measurement Specialties + HTU21D humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu21. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" + depends on I2C + help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_LM63 tristate "National Semiconductor LM63 and compatibles" depends on I2C @@ -530,12 +846,12 @@ config SENSORS_LM63 will be called lm63. config SENSORS_LM70 - tristate "National Semiconductor LM70 / Texas Instruments TMP121" + tristate "National Semiconductor LM70 and compatibles" depends on SPI_MASTER help If you say yes here you get support for the National Semiconductor - LM70 and Texas Instruments TMP121/TMP123 digital temperature - sensor chips. + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- + ture sensor chips. This driver can also be built as a module. If so, the module will be called lm70. @@ -552,12 +868,14 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C + depends on THERMAL || !THERMAL_OF help If you say yes here you get support for one common type of temperature sensor chip, with models including: - Analog Devices ADT75 - - Dallas Semiconductor DS75 and DS1775 + - Dallas Semiconductor DS75, DS1775 and DS7505 + - Global Mixed-mode Technology (GMT) G751 - Maxim MAX6625 and MAX6626 - Microchip MCP980x - National Semiconductor LM75, LM75A @@ -676,49 +994,15 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. -config SENSORS_LTC4151 - tristate "Linear Technology LTC4151" +config SENSORS_LM95234 + tristate "National Semiconductor LM95234" depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4151 - High Voltage I2C Current and Voltage Monitor interface. - - This driver can also be built as a module. If so, the module will - be called ltc4151. - -config SENSORS_LTC4215 - tristate "Linear Technology LTC4215" - depends on I2C && EXPERIMENTAL - default n - help - If you say yes here you get support for Linear Technology LTC4215 - Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4215. - -config SENSORS_LTC4245 - tristate "Linear Technology LTC4245" - depends on I2C && EXPERIMENTAL - default n help - If you say yes here you get support for Linear Technology LTC4245 - Multiple Supply Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4245. - -config SENSORS_LTC4261 - tristate "Linear Technology LTC4261" - depends on I2C && EXPERIMENTAL - default n - help - If you say yes here you get support for Linear Technology LTC4261 - Negative Voltage Hot Swap Controller I2C interface. + If you say yes here you get support for the LM95234 temperature + sensor. - This driver can also be built as a module. If so, the module will - be called ltc4261. + This driver can also be built as a module. If so, the module + will be called lm95234. config SENSORS_LM95241 tristate "National Semiconductor LM95241 and compatibles" @@ -732,139 +1016,78 @@ config SENSORS_LM95241 config SENSORS_LM95245 tristate "National Semiconductor LM95245 sensor chip" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for LM95245 sensor chip. This driver can also be built as a module. If so, the module will be called lm95245. -config SENSORS_MAX1111 - tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" - depends on SPI_MASTER - help - Say y here to support Maxim's MAX1111 ADC chips. - - This driver can also be built as a module. If so, the module - will be called max1111. - -config SENSORS_MAX16065 - tristate "Maxim MAX16065 System Manager and compatibles" - depends on I2C - help - If you say yes here you get support for hardware monitoring - capabilities of the following Maxim System Manager chips. - MAX16065 - MAX16066 - MAX16067 - MAX16068 - MAX16070 - MAX16071 - - This driver can also be built as a module. If so, the module - will be called max16065. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_MAX1668 - tristate "Maxim MAX1668 and compatibles" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for MAX1668, MAX1989 and - MAX1805 chips. - - This driver can also be built as a module. If so, the module - will be called max1668. - -config SENSORS_MAX6639 - tristate "Maxim MAX6639 sensor chip" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for the MAX6639 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6639. - -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - -config SENSORS_MAX6650 - tristate "Maxim MAX6650 sensor chip" - depends on I2C && EXPERIMENTAL +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on !PPC + select HWMON_VID help - If you say yes here you get support for the MAX6650 / MAX6651 - sensor chips. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. This driver can also be built as a module. If so, the module - will be called max6650. + will be called pc87360. -config SENSORS_MCP3021 - tristate "Microchip MCP3021" - depends on I2C && EXPERIMENTAL +config SENSORS_PC87427 + tristate "National Semiconductor PC87427" + depends on !PPC help - If you say yes here you get support for the MCP3021 chip - that is a A/D converter (ADC) with 10-bit resolution. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC87427 Super-I/O chip. + The chip has two distinct logical devices, one for fan speed + monitoring and control, and one for voltage and temperature + monitoring. Fan speed monitoring and control are supported, as + well as temperature monitoring. Voltages aren't supported yet. This driver can also be built as a module. If so, the module - will be called mcp3021. + will be called pc87427. config SENSORS_NTC_THERMISTOR - tristate "NTC thermistor support" - depends on EXPERIMENTAL + tristate "NTC thermistor support from Murata" + depends on !OF || IIO=n || IIO help This driver supports NTC thermistors sensor reading and its interpretation. The driver can also monitor the temperature and send notifications about the temperature. Currently, this driver supports - NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333 + from Murata. This driver can also be built as a module. If so, the module will be called ntc-thermistor. -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" +config SENSORS_NCT6683 + tristate "Nuvoton NCT6683D" depends on !PPC - select HWMON_VID help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6683D eSIO chip. This driver can also be built as a module. If so, the module - will be called pc87360. + will be called nct6683. -config SENSORS_PC87427 - tristate "National Semiconductor PC87427" +config SENSORS_NCT6775 + tristate "Nuvoton NCT6775F and compatibles" depends on !PPC + select HWMON_VID help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC87427 Super-I/O chip. - The chip has two distinct logical devices, one for fan speed - monitoring and control, and one for voltage and temperature - monitoring. Fan speed monitoring and control are supported, as - well as temperature monitoring. Voltages aren't supported yet. + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D + and compatible Super-I/O chips. This driver replaces the + w83627ehf driver for NCT6775F and NCT6776F. This driver can also be built as a module. If so, the module - will be called pc87427. + will be called nct6775. config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" @@ -902,6 +1125,16 @@ config SENSORS_SHT21 This driver can also be built as a module. If so, the module will be called sht21. +config SENSORS_SHTC1 + tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHTC1 and SHTW1 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called shtc1. + config SENSORS_S3C tristate "Samsung built-in ADC" depends on S3C_ADC @@ -929,24 +1162,9 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C && EXPERIMENTAL - default n - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" - depends on I2C && EXPERIMENTAL && !PPC + depends on I2C && !PPC select HWMON_VID help If you say yes here you get support for the hardware monitoring @@ -959,6 +1177,7 @@ config SENSORS_DME1737 config SENSORS_EMC1403 tristate "SMSC EMC1403/23 thermal sensor" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the SMSC EMC1403/23 temperature monitoring chip. @@ -1022,7 +1241,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" - depends on EXPERIMENTAL && !PPC + depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. @@ -1065,22 +1284,48 @@ config SENSORS_SCH5636 This driver can also be built as a module. If so, the module will be called sch5636. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + +config SENSORS_ADC128D818 + tristate "Texas Instruments ADC128D818" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + ADC128D818 System Monitor with Temperature Sensor chip. + + This driver can also be built as a module. If so, the module + will be called adc128d818. + config SENSORS_ADS1015 tristate "Texas Instruments ADS1015" depends on I2C help - If you say yes here you get support for Texas Instruments ADS1015 - 12-bit 4-input ADC device. + If you say yes here you get support for Texas Instruments + ADS1015/ADS1115 12/16-bit 4-input ADC device. This driver can also be built as a module. If so, the module will be called ads1015. config SENSORS_ADS7828 - tristate "Texas Instruments ADS7828" + tristate "Texas Instruments ADS7828 and compatibles" depends on I2C help - If you say yes here you get support for Texas Instruments ADS7828 - 12-bit 8-channel ADC device. + If you say yes here you get support for Texas Instruments ADS7828 and + ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while + it is 8-bit on ADS7830. This driver can also be built as a module. If so, the module will be called ads7828. @@ -1096,7 +1341,7 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. @@ -1104,12 +1349,22 @@ config SENSORS_AMC6821 This driver can also be build as a module. If so, the module will be called amc6821. +config SENSORS_INA209 + tristate "TI / Burr Brown INA209" + depends on I2C + help + If you say yes here you get support for the TI / Burr Brown INA209 + voltage / current / power monitor I2C interface. + + This driver can also be built as a module. If so, the module will + be called ina209. + config SENSORS_INA2XX - tristate "Texas Instruments INA219, INA226" - depends on I2C && EXPERIMENTAL + tristate "Texas Instruments INA219 and compatibles" + depends on I2C help - If you say yes here you get support for INA219 and INA226 power - monitor chips. + If you say yes here you get support for INA219, INA220, INA226, and + INA230 power monitor chips. The INA2xx driver is configured for the default configuration of the part as described in the datasheet. @@ -1129,7 +1384,8 @@ config SENSORS_THMC50 config SENSORS_TMP102 tristate "Texas Instruments TMP102" - depends on I2C && EXPERIMENTAL + depends on I2C + depends on THERMAL || !THERMAL_OF help If you say yes here you get support for Texas Instruments TMP102 sensor chips. @@ -1139,17 +1395,17 @@ config SENSORS_TMP102 config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C help - If you say yes here you get support for Texas Instruments TMP401 and - TMP411 temperature sensor chips. + If you say yes here you get support for Texas Instruments TMP401, + TMP411, TMP431, and TMP432 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. config SENSORS_TMP421 tristate "Texas Instruments TMP421 and compatible" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. @@ -1167,6 +1423,14 @@ config SENSORS_TWL4030_MADC This driver can also be built as a module. If so it will be called twl4030-madc-hwmon. +config SENSORS_VEXPRESS + tristate "Versatile Express" + depends on VEXPRESS_CONFIG + help + This driver provides support for hardware sensors available on + the ARM Ltd's Versatile Express platform. It can provide wide + range of information like temperature, power, energy. + config SENSORS_VIA_CPUTEMP tristate "VIA CPU temperature sensor" depends on X86 @@ -1241,7 +1505,7 @@ config SENSORS_W83792D config SENSORS_W83793 tristate "Winbond W83793" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83793 @@ -1253,7 +1517,7 @@ config SENSORS_W83793 config SENSORS_W83795 tristate "Winbond/Nuvoton W83795G/ADG" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83795G and W83795ADG hardware monitoring chip, including manual fan speed @@ -1264,7 +1528,7 @@ config SENSORS_W83795 config SENSORS_W83795_FANCTRL boolean "Include automatic fan control support (DANGEROUS)" - depends on SENSORS_W83795 && EXPERIMENTAL + depends on SENSORS_W83795 default n help If you say yes here, support for automatic fan speed control @@ -1281,7 +1545,7 @@ config SENSORS_W83795_FANCTRL config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -1292,7 +1556,7 @@ config SENSORS_W83L785TS config SENSORS_W83L786NG tristate "Winbond W83L786NG, W83L786NR" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83L786NG and W83L786NR sensor chips. @@ -1360,37 +1624,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_APPLESMC - tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on INPUT && X86 - select NEW_LEDS - select LEDS_CLASS - select INPUT_POLLDEV - default n - help - This driver provides support for the Apple System Management - Controller, which provides an accelerometer (Apple Sudden Motion - Sensor), light sensors, temperature sensors, keyboard backlight - control and fan control. - - Only Intel-based Apple's computers are supported (MacBook Pro, - MacBook, MacMini). - - Data from the different sensors, keyboard backlight control and fan - control are accessible via sysfs. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of applesmc. - -config SENSORS_MC13783_ADC - tristate "Freescale MC13783/MC13892 ADC" - depends on MFD_MC13XXX - help - Support for the A/D converter on MC13783 and MC13892 PMIC. - if ACPI comment "ACPI drivers" @@ -1407,7 +1640,7 @@ config SENSORS_ACPI_POWER config SENSORS_ATK0110 tristate "ASUS ATK0110" - depends on X86 && EXPERIMENTAL + depends on X86 help If you say yes here you get support for the ACPI hardware monitoring interface found in many ASUS motherboards. This |