diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 1208 |
1 files changed, 1026 insertions, 182 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 00ff5334849..02d3d85829f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -28,9 +28,33 @@ config HWMON_VID tristate default n +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + default n + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +comment "Native drivers" + +config SENSORS_AB8500 + tristate "AB8500 thermal monitoring" + depends on AB8500_GPADC && AB8500_BM + default n + help + If you say yes here you get support for the thermal sensor part + of the AB8500 chip. The driver includes thermal management for + AB8500 die and two GPADC channels. The GPADC channel are preferably + used to access sensors outside the AB8500 chip. + + This driver can also be built as a module. If so, the module + will be called abx500-temp. + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -45,7 +69,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -57,9 +81,29 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7314 + tristate "Analog Devices AD7314 and compatibles" + depends on SPI + help + If you say yes here you get support for the Analog Devices + AD7314, ADT7301 and ADT7302 temperature sensors. + + This driver can also be built as a module. If so, the module + will be called ad7314. + +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices AD7416, AD7417 and AD7418 temperature monitoring chips. @@ -73,8 +117,7 @@ config SENSORS_ADM1021 help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. + Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. This driver can also be built as a module. If so, the module will be called adm1021. @@ -92,7 +135,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 @@ -103,7 +146,7 @@ config SENSORS_ADM1026 config SENSORS_ADM1029 tristate "Analog Devices ADM1029" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Analog Devices ADM1029 sensor chip. @@ -114,7 +157,7 @@ config SENSORS_ADM1029 config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -124,7 +167,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -133,9 +176,59 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7X10 + tristate + help + This module contains common code shared by the ADT7310/ADT7320 and + ADT7410/ADT7420 temperature monitoring chip drivers. + + If build as a module, the module will be called adt7x10. + +config SENSORS_ADT7310 + tristate "Analog Devices ADT7310/ADT7320" + depends on SPI_MASTER + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7310 and ADT7320 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7310. + +config SENSORS_ADT7410 + tristate "Analog Devices ADT7410/ADT7420" + depends on I2C + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7410 and ADT7420 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7410. + +config SENSORS_ADT7411 + tristate "Analog Devices ADT7411" + depends on I2C + help + If you say yes here you get support for the Analog Devices + ADT7411 voltage and temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called adt7411. + +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. @@ -143,19 +236,34 @@ config SENSORS_ADT7470 This driver can also be built as a module. If so, the module will be called adt7470. -config SENSORS_ADT7473 - tristate "Analog Devices ADT7473" - depends on I2C && EXPERIMENTAL +config SENSORS_ADT7475 + tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" + depends on I2C + select HWMON_VID help If you say yes here you get support for the Analog Devices - ADT7473 temperature monitoring chips. + ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring + chips. - This driver can also be built as a module. If so, the module - will be called adt7473. + This driver can also be build as a module. If so, the module + will be called adt7475. + +config SENSORS_ASC7621 + tristate "Andigilog aSC7621" + depends on I2C + help + If you say yes here you get support for the aSC7621 + family of SMBus sensors chip found on most Intel X38, X48, X58, + 945, 965 and 975 desktop boards. Currently supported chips: + aSC7621 + aSC7621a + + This driver can also be built as a module. If so, the module + will be called asc7621. config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" - depends on X86 && PCI && EXPERIMENTAL + depends on X86 && PCI help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported is whole AMD K8 @@ -165,35 +273,57 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. -config SENSORS_AMS - tristate "Apple Motion Sensor driver" - depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL - select INPUT_POLLDEV +config SENSORS_K10TEMP + tristate "AMD Family 10h+ temperature sensor" + depends on X86 && PCI help - Support for the motion sensor included in PowerBooks. Includes - implementations for PMU and I2C. + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h, + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and + 16h (Kabini/Mullins) microarchitectures. - This driver can also be built as a module. If so, the module - will be called ams. + This driver can also be built as a module. If so, the module + will be called k10temp. -config SENSORS_AMS_PMU - bool "PMU variant" - depends on SENSORS_AMS && ADB_PMU - default y +config SENSORS_FAM15H_POWER + tristate "AMD Family 15h processor power" + depends on X86 && PCI help - PMU variant of motion sensor, found in late 2005 PowerBooks. + If you say yes here you get support for processor power + information of your AMD family 15h CPU. -config SENSORS_AMS_I2C - bool "I2C variant" - depends on SENSORS_AMS && I2C - default y + This driver can also be built as a module. If so, the module + will be called fam15h_power. + +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n help - I2C variant of motion sensor, found in early 2005 PowerBooks and - iBooks. + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on X86 && I2C && EXPERIMENTAL + depends on X86 && I2C select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -204,7 +334,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID @@ -216,19 +346,54 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. -config SENSORS_DS1621 - tristate "Dallas Semiconductor DS1621 and DS1625" +config SENSORS_DS620 + tristate "Dallas Semiconductor DS620" depends on I2C help If you say yes here you get support for Dallas Semiconductor - DS1621 and DS1625 sensor chips. + DS620 sensor chip. + + This driver can also be built as a module. If so, the module + will be called ds620. + +config SENSORS_DS1621 + tristate "Dallas Semiconductor DS1621 and compatibles" + depends on I2C + help + If you say yes here you get support for Dallas Semiconductor/Maxim + Integrated DS1621 sensor chips and compatible models including: + + - Dallas Semiconductor DS1625 + - Maxim Integrated DS1631 + - Maxim Integrated DS1721 + - Maxim Integrated DS1731 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DA9052_ADC + tristate "Dialog DA9052/DA9053 ADC" + depends on PMIC_DA9052 + help + Say y here to support the ADC found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + +config SENSORS_DA9055 + tristate "Dialog Semiconductor DA9055 ADC" + depends on MFD_DA9055 + help + If you say yes here you get support for ADC on the Dialog + Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-hwmon. + config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" - depends on PCI && EXPERIMENTAL + depends on PCI help If you say yes here you get support for FB-DIMM AMB temperature monitoring chips on systems with the Intel 5000 series chipset. @@ -238,7 +403,7 @@ config SENSORS_I5K_AMB config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" - depends on EXPERIMENTAL + depends on !PPC help If you say yes here you get support for hardware monitoring features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG @@ -248,55 +413,55 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71882FG and F71883FG" - depends on EXPERIMENTAL + tristate "Fintek F71882FG and compatibles" + depends on !PPC help If you say yes here you get support for hardware monitoring - features of the Fintek F71882FG and F71883FG Super-I/O chips. + features of many Fintek Super-I/O (LPC) chips. The currently + supported chips are: + F71808E/A + F71858FG + F71862FG + F71863FG + F71869F/E/A + F71882FG + F71883FG + F71889FG/ED/A + F8000 + F81801U + F81865F This driver can also be built as a module. If so, the module will be called f71882fg. config SENSORS_F75375S - tristate "Fintek F75375S/SP and F75373"; - depends on I2C && EXPERIMENTAL + tristate "Fintek F75375S/SP, F75373 and F75387" + depends on I2C help If you say yes here you get support for hardware monitoring - features of the Fintek F75375S/SP and F75373 + features of the Fintek F75375S/SP, F75373 and F75387 This driver can also be built as a module. If so, the module will be called f75375s. -config SENSORS_FSCHER - tristate "FSC Hermes" - depends on X86 && I2C - help - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon" - depends on X86 && I2C - help - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. config SENSORS_FSCHMD - tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" - depends on X86 && I2C && EXPERIMENTAL + tristate "Fujitsu Siemens Computers sensor chips" + depends on X86 && I2C help - If you say yes here you get support for various Fujitsu Siemens - Computers sensor chips. + If you say yes here you get support for the following Fujitsu + Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, + Heimdall, Heracles, Hades and Syleus including support for the + integrated watchdog. - This is a new merged driver for FSC sensor chips which is intended - as a replacment for the fscpos, fscscy and fscher drivers and adds - support for several other FCS sensor chips. + This is a merged driver for FSC sensor chips replacing the fscpos, + fscscy and fscher drivers and adding support for several other FSC + sensor chips. This driver can also be built as a module. If so, the module will be called fschmd. @@ -322,13 +487,44 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. -config SENSORS_CORETEMP - tristate "Intel Core (2) Duo/Solo temperature sensor" - depends on X86 && EXPERIMENTAL +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C help - If you say yes here you get support for the temperature - sensor inside your CPU. Supported all are all known variants - of Intel Core family. + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + +config SENSORS_GPIO_FAN + tristate "GPIO fan" + depends on GPIOLIB + help + If you say yes here you get support for fans connected to GPIO lines. + + This driver can also be built as a module. If so, the module + will be called gpio-fan. + +config SENSORS_HIH6130 + tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" + depends on I2C + help + If you say yes here you get support for Honeywell Humidicon + HIH-6130 and HIH-6131 Humidicon humidity sensors. + + This driver can also be built as a module. If so, the module + will be called hih6130. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" @@ -339,7 +535,7 @@ config SENSORS_IBMAEM power sensors and capping hardware in various IBM System X servers that support Active Energy Manager. This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, - and certain HS2x/LS2x/QS2x blades. + and certain HC10/HS2x/LS2x/QS2x blades. This driver can also be built as a module. If so, the module will be called ibmaem. @@ -358,49 +554,343 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_IIO_HWMON + tristate "Hwmon driver that uses channels specified via iio maps" + depends on IIO + help + This is a platform driver that in combination with a suitable + map allows IIO devices to provide basic hwmon functionality + for those channels specified in the map. This map can be provided + either via platform data or the device tree bindings. + +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp for details. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" + depends on !PPC select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. + IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, + IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips, + and the SiS950 clone. This driver can also be built as a module. If so, the module will be called it87. -config SENSORS_LM63 - tristate "National Semiconductor LM63" +config SENSORS_JZ4740 + tristate "Ingenic JZ4740 SoC ADC driver" + depends on MACH_JZ4740 && MFD_JZ4740_ADC + help + If you say yes here you get support for reading adc values from the ADCIN + pin on Ingenic JZ4740 SoC based boards. + + This driver can also be build as a module. If so, the module will be + called jz4740-hwmon. + +config SENSORS_JC42 + tristate "JEDEC JC42.4 compliant memory module temperature sensors" + depends on I2C + help + If you say yes here, you get support for JEDEC JC42.4 compliant + temperature sensors, which are used on many DDR3 memory modules for + mobile devices and servers. Support will include, but not be limited + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), + STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. + + This driver can also be built as a module. If so, the module + will be called jc42. + +config SENSORS_LINEAGE + tristate "Lineage Compact Power Line Power Entry Module" + depends on I2C + help + If you say yes here you get support for the Lineage Compact Power Line + series of DC/DC and AC/DC converters such as CP1800, CP2000AC, + CP2000DC, CP2725, and others. + + This driver can also be built as a module. If so, the module + will be called lineage-pem. + +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_HTU21 + tristate "Measurement Specialties HTU21D humidity/temperature sensors" + depends on I2C + help + If you say yes here you get support for the Measurement Specialties + HTU21D humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu21. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" depends on I2C help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help If you say yes here you get support for the National Semiconductor - LM63 remote diode digital temperature sensor with integrated fan - control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) - motherboard, among others. + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + +config SENSORS_LM63 + tristate "National Semiconductor LM63 and compatibles" + depends on I2C + help + If you say yes here you get support for the National + Semiconductor LM63, LM64, and LM96163 remote diode digital temperature + sensors with integrated fan control. Such chips are found + on the Tyan S4882 (Thunder K8QS Pro) motherboard, among + others. This driver can also be built as a module. If so, the module will be called lm63. config SENSORS_LM70 - tristate "National Semiconductor LM70" - depends on SPI_MASTER && EXPERIMENTAL + tristate "National Semiconductor LM70 and compatibles" + depends on SPI_MASTER help If you say yes here you get support for the National Semiconductor - LM70 digital temperature sensor chip. + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- + ture sensor chips. This driver can also be built as a module. If so, the module will be called lm70. -config SENSORS_LM75 - tristate "National Semiconductor LM75 and compatibles" +config SENSORS_LM73 + tristate "National Semiconductor LM73" depends on I2C help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. + If you say yes here you get support for National Semiconductor LM73 + sensor chips. + This driver can also be built as a module. If so, the module + will be called lm73. - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. +config SENSORS_LM75 + tristate "National Semiconductor LM75 and compatibles" + depends on I2C + depends on THERMAL || !THERMAL_OF + help + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Analog Devices ADT75 + - Dallas Semiconductor DS75, DS1775 and DS7505 + - Global Mixed-mode Technology (GMT) G751 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75, LM75A + - NXP's LM75A + - ST Microelectronics STDS75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, + TMP275 + + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. @@ -427,11 +917,11 @@ config SENSORS_LM78 will be called lm78. config SENSORS_LM80 - tristate "National Semiconductor LM80" - depends on I2C && EXPERIMENTAL + tristate "National Semiconductor LM80 and LM96080" + depends on I2C help If you say yes here you get support for National Semiconductor - LM80 sensor chips. + LM80 and LM96080 sensor chips. This driver can also be built as a module. If so, the module will be called lm80. @@ -448,11 +938,12 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. + sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, + EMC6D101, EMC6D102, and EMC6D103. This driver can also be built as a module. If so, the module will be called lm85. @@ -473,11 +964,11 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, - MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. + LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, + Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, + Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 + sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -497,33 +988,44 @@ config SENSORS_LM93 depends on I2C select HWMON_VID help - If you say yes here you get support for National Semiconductor LM93 - sensor chips. + If you say yes here you get support for National Semiconductor LM93, + LM94, and compatible sensor chips. This driver can also be built as a module. If so, the module will be called lm93. -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" +config SENSORS_LM95234 + tristate "National Semiconductor LM95234" depends on I2C help - If you say yes here you get support for MAX1619 sensor chip. + If you say yes here you get support for the LM95234 temperature + sensor. This driver can also be built as a module. If so, the module - will be called max1619. + will be called lm95234. -config SENSORS_MAX6650 - tristate "Maxim MAX6650 sensor chip" - depends on I2C && EXPERIMENTAL +config SENSORS_LM95241 + tristate "National Semiconductor LM95241 and compatibles" + depends on I2C help - If you say yes here you get support for the MAX6650 / MAX6651 - sensor chips. + If you say yes here you get support for LM95231 and LM95241 sensor + chips. This driver can also be built as a module. If so, the module - will be called max6650. + will be called lm95241. + +config SENSORS_LM95245 + tristate "National Semiconductor LM95245 sensor chip" + depends on I2C + help + If you say yes here you get support for LM95245 sensor chip. + + This driver can also be built as a module. If so, the module + will be called lm95245. config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" + depends on !PPC select HWMON_VID help If you say yes here you get access to the hardware monitoring @@ -537,17 +1039,119 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" - depends on EXPERIMENTAL + depends on !PPC help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC87427 Super-I/O chip. The chip has two distinct logical devices, one for fan speed monitoring and control, and one for voltage and temperature - monitoring. Only fan speed monitoring is supported right now. + monitoring. Fan speed monitoring and control are supported, as + well as temperature monitoring. Voltages aren't supported yet. This driver can also be built as a module. If so, the module will be called pc87427. +config SENSORS_NTC_THERMISTOR + tristate "NTC thermistor support from Murata" + depends on !OF || IIO=n || IIO + help + This driver supports NTC thermistors sensor reading and its + interpretation. The driver can also monitor the temperature and + send notifications about the temperature. + + Currently, this driver supports + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333 + from Murata. + + This driver can also be built as a module. If so, the module + will be called ntc-thermistor. + +config SENSORS_NCT6683 + tristate "Nuvoton NCT6683D" + depends on !PPC + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6683D eSIO chip. + + This driver can also be built as a module. If so, the module + will be called nct6683. + +config SENSORS_NCT6775 + tristate "Nuvoton NCT6775F and compatibles" + depends on !PPC + select HWMON_VID + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D + and compatible Super-I/O chips. This driver replaces the + w83627ehf driver for NCT6775F and NCT6776F. + + This driver can also be built as a module. If so, the module + will be called nct6775. + +config SENSORS_PCF8591 + tristate "Philips PCF8591 ADC/DAC" + depends on I2C + default n + help + If you say yes here you get support for Philips PCF8591 4-channel + ADC, 1-channel DAC chips. + + This driver can also be built as a module. If so, the module + will be called pcf8591. + + These devices are hard to detect and rarely found on mainstream + hardware. If unsure, say N. + +source drivers/hwmon/pmbus/Kconfig + +config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GPIOLIB + help + If you say yes here you get support for the Sensiron SHT10, SHT11, + SHT15, SHT71, SHT75 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht15. + +config SENSORS_SHT21 + tristate "Sensiron humidity and temperature sensors. SHT21 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHT21, SHT25 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht21. + +config SENSORS_SHTC1 + tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHTC1 and SHTW1 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called shtc1. + +config SENSORS_S3C + tristate "Samsung built-in ADC" + depends on S3C_ADC + help + If you say yes here you get support for the on-board ADCs of + the Samsung S3C24XX, S3C64XX and other series of SoC + + This driver can also be built as a module. If so, the module + will be called s3c-hwmon. + +config SENSORS_S3C_RAW + bool "Include raw channel attributes in sysfs" + depends on SENSORS_S3C + help + Say Y here if you want to include raw copies of all the ADC + channels in sysfs. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI @@ -560,18 +1164,50 @@ config SENSORS_SIS5595 config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C && !PPC select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) and SCH311x Super-I/O chips. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. +config SENSORS_EMC1403 + tristate "SMSC EMC1403/23 thermal sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the SMSC EMC1403/23 + temperature monitoring chip. + + Threshold values can be configured using sysfs. + Data from the different diodes are accessible via sysfs. + +config SENSORS_EMC2103 + tristate "SMSC EMC2103" + depends on I2C + help + If you say yes here you get support for the temperature + and fan sensors of the SMSC EMC2103 chips. + + This driver can also be built as a module. If so, the module + will be called emc2103. + +config SENSORS_EMC6W201 + tristate "SMSC EMC6W201" + depends on I2C + help + If you say yes here you get support for the SMSC EMC6W201 + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called emc6w201. + config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" + depends on !PPC help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, @@ -588,7 +1224,7 @@ config SENSORS_SMSC47M1 config SENSORS_SMSC47M192 tristate "SMSC LPC47M192 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the temperature and @@ -605,7 +1241,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" - depends on EXPERIMENTAL + depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. @@ -613,19 +1249,132 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_SCH56XX_COMMON + tristate + default n + +config SENSORS_SCH5627 + tristate "SMSC SCH5627" + depends on !PPC && WATCHDOG + select SENSORS_SCH56XX_COMMON + select WATCHDOG_CORE + help + If you say yes here you get support for the hardware monitoring + features of the SMSC SCH5627 Super-I/O chip including support for + the integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called sch5627. + +config SENSORS_SCH5636 + tristate "SMSC SCH5636" + depends on !PPC && WATCHDOG + select SENSORS_SCH56XX_COMMON + select WATCHDOG_CORE + help + SMSC SCH5636 Super I/O chips include an embedded microcontroller for + hardware monitoring solutions, allowing motherboard manufacturers to + create their own custom hwmon solution based upon the SCH5636. + + Currently this driver only supports the Fujitsu Theseus SCH5636 based + hwmon solution. Say yes here if you want support for the Fujitsu + Theseus' hardware monitoring features including support for the + integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called sch5636. + +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + +config SENSORS_ADC128D818 + tristate "Texas Instruments ADC128D818" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + ADC128D818 System Monitor with Temperature Sensor chip. + + This driver can also be built as a module. If so, the module + will be called adc128d818. + +config SENSORS_ADS1015 + tristate "Texas Instruments ADS1015" + depends on I2C + help + If you say yes here you get support for Texas Instruments + ADS1015/ADS1115 12/16-bit 4-input ADC device. + + This driver can also be built as a module. If so, the module + will be called ads1015. + config SENSORS_ADS7828 - tristate "Texas Instruments ADS7828" + tristate "Texas Instruments ADS7828 and compatibles" depends on I2C help - If you say yes here you get support for Texas Instruments ADS7828 - 12-bit 8-channel ADC device. + If you say yes here you get support for Texas Instruments ADS7828 and + ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while + it is 8-bit on ADS7830. This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_ADS7871 + tristate "Texas Instruments ADS7871 A/D converter" + depends on SPI + help + If you say yes here you get support for TI ADS7871 & ADS7870 + + This driver can also be built as a module. If so, the module + will be called ads7871. + +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be build as a module. If so, the module + will be called amc6821. + +config SENSORS_INA209 + tristate "TI / Burr Brown INA209" + depends on I2C + help + If you say yes here you get support for the TI / Burr Brown INA209 + voltage / current / power monitor I2C interface. + + This driver can also be built as a module. If so, the module will + be called ina209. + +config SENSORS_INA2XX + tristate "Texas Instruments INA219 and compatibles" + depends on I2C + help + If you say yes here you get support for INA219, INA220, INA226, and + INA230 power monitor chips. + + The INA2xx driver is configured for the default configuration of + the part as described in the datasheet. + Default value for Rshunt is 10 mOhms. + This driver can also be built as a module. If so, the module + will be called ina2xx. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Texas Instruments THMC50 sensor chips and clones: the Analog Devices ADM1022. @@ -633,6 +1382,64 @@ config SENSORS_THMC50 This driver can also be built as a module. If so, the module will be called thmc50. +config SENSORS_TMP102 + tristate "Texas Instruments TMP102" + depends on I2C + depends on THERMAL || !THERMAL_OF + help + If you say yes here you get support for Texas Instruments TMP102 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp102. + +config SENSORS_TMP401 + tristate "Texas Instruments TMP401 and compatibles" + depends on I2C + help + If you say yes here you get support for Texas Instruments TMP401, + TMP411, TMP431, and TMP432 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp401. + +config SENSORS_TMP421 + tristate "Texas Instruments TMP421 and compatible" + depends on I2C + help + If you say yes here you get support for Texas Instruments TMP421, + TMP422 and TMP423 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp421. + +config SENSORS_TWL4030_MADC + tristate "Texas Instruments TWL4030 MADC Hwmon" + depends on TWL4030_MADC + help + If you say yes here you get hwmon support for triton + TWL4030-MADC. + + This driver can also be built as a module. If so it will be called + twl4030-madc-hwmon. + +config SENSORS_VEXPRESS + tristate "Versatile Express" + depends on VEXPRESS_CONFIG + help + This driver provides support for hardware sensors available on + the ARM Ltd's Versatile Express platform. It can provide wide + range of information like temperature, power, energy. + +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI @@ -645,7 +1452,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" - depends on EXPERIMENTAL + depends on !PPC select HWMON_VID help If you say yes here then you get support for hardware monitoring @@ -679,7 +1486,7 @@ config SENSORS_W83781D config SENSORS_W83791D tristate "Winbond W83791D" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. @@ -689,7 +1496,7 @@ config SENSORS_W83791D config SENSORS_W83792D tristate "Winbond W83792D" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83792D chip. @@ -698,18 +1505,47 @@ config SENSORS_W83792D config SENSORS_W83793 tristate "Winbond W83793" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83793 - hardware monitoring chip. + hardware monitoring chip, including support for the integrated + watchdog. This driver can also be built as a module. If so, the module will be called w83793. +config SENSORS_W83795 + tristate "Winbond/Nuvoton W83795G/ADG" + depends on I2C + help + If you say yes here you get support for the Winbond W83795G and + W83795ADG hardware monitoring chip, including manual fan speed + control. + + This driver can also be built as a module. If so, the module + will be called w83795. + +config SENSORS_W83795_FANCTRL + boolean "Include automatic fan control support (DANGEROUS)" + depends on SENSORS_W83795 + default n + help + If you say yes here, support for automatic fan speed control + will be included in the driver. + + This part of the code wasn't carefully reviewed and tested yet, + so enabling this option is strongly discouraged on production + servers. Only developers and testers should enable it for the + time being. + + Please also note that this option will create sysfs attribute + files which may change in the future, so you shouldn't rely + on them being stable. + config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -720,7 +1556,7 @@ config SENSORS_W83L785TS config SENSORS_W83L786NG tristate "Winbond W83L786NG, W83L786NR" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83L786NG and W83L786NR sensor chips. @@ -730,6 +1566,7 @@ config SENSORS_W83L786NG config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on !PPC select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series @@ -740,7 +1577,8 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/DHG" + tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" + depends on !PPC select HWMON_VID help If you say yes here you get support for the hardware @@ -749,63 +1587,69 @@ config SENSORS_W83627EHF This driver also supports the W83627EHG, which is the lead-free version of the W83627EHF, and the W83627DHG, which is a similar chip suited for specific Intel processors that use PECI such as - the Core 2 Duo. + the Core 2 Duo. And also the W83627UHG, which is a stripped down + version of the W83627DHG (as far as hardware monitoring goes.) + + This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F + (also known as W83667HG-I), and NCT6776F. This driver can also be built as a module. If so, the module will be called w83627ehf. -config SENSORS_HDAPS - tristate "IBM Hard Drive Active Protection System (hdaps)" - depends on INPUT && X86 - select INPUT_POLLDEV - default n +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X help - This driver provides support for the IBM Hard Drive Active Protection - System (hdaps), which provides an accelerometer and other misc. data. - ThinkPads starting with the R50, T41, and X40 are supported. The - accelerometer data is readable via sysfs. + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. - If your ThinkPad is not recognized by the driver, please update to latest - BIOS. This is especially the case for some R52 ThinkPads. +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. - Say Y here if you have an applicable laptop and want to experience - the awesome power of hdaps. + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. -config SENSORS_APPLESMC - tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on INPUT && X86 - select NEW_LEDS - select LEDS_CLASS - select INPUT_POLLDEV - default n +config SENSORS_ULTRA45 + tristate "Sun Ultra45 PIC16F747" + depends on SPARC64 help - This driver provides support for the Apple System Management - Controller, which provides an accelerometer (Apple Sudden Motion - Sensor), light sensors, temperature sensors, keyboard backlight - control and fan control. + This driver provides support for the Ultra45 workstation environmental + sensors. - Only Intel-based Apple's computers are supported (MacBook Pro, - MacBook, MacMini). +if ACPI - Data from the different sensors, keyboard backlight control and fan - control are accessible via sysfs. +comment "ACPI drivers" - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. +config SENSORS_ACPI_POWER + tristate "ACPI 4.0 power meter" + help + This driver exposes ACPI 4.0 power meters as hardware monitoring + devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware + and a power meter. - Say Y here if you have an applicable laptop and want to experience - the awesome power of applesmc. + To compile this driver as a module, choose M here: + the module will be called acpi_power_meter. -config HWMON_DEBUG_CHIP - bool "Hardware Monitoring Chip debugging messages" - default n +config SENSORS_ATK0110 + tristate "ASUS ATK0110" + depends on X86 help - Say Y here if you want the I2C chip drivers to produce a bunch of - debug messages to the system log. Select this if you are having - a problem with I2C support and want to see more of what is going - on. + If you say yes here you get support for the ACPI hardware + monitoring interface found in many ASUS motherboards. This + driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_atk0110. + +endif # ACPI endif # HWMON |