diff options
Diffstat (limited to 'drivers/gpu/drm/tegra/rgb.c')
| -rw-r--r-- | drivers/gpu/drm/tegra/rgb.c | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c new file mode 100644 index 00000000000..d6af9be48f4 --- /dev/null +++ b/drivers/gpu/drm/tegra/rgb.c @@ -0,0 +1,325 @@ +/* + * Copyright (C) 2012 Avionic Design GmbH + * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> + +#include "drm.h" +#include "dc.h" + +struct tegra_rgb { + struct tegra_output output; + struct tegra_dc *dc; + bool enabled; + + struct clk *clk_parent; + struct clk *clk; +}; + +static inline struct tegra_rgb *to_rgb(struct tegra_output *output) +{ + return container_of(output, struct tegra_rgb, output); +} + +struct reg_entry { + unsigned long offset; + unsigned long value; +}; + +static const struct reg_entry rgb_enable[] = { + { DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 }, + { DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 }, + { DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 }, + { DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 }, + { DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 }, +}; + +static const struct reg_entry rgb_disable[] = { + { DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, + { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa }, + { DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa }, + { DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa }, + { DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa }, + { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 }, + { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, + { DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 }, + { DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 }, + { DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 }, + { DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 }, +}; + +static void tegra_dc_write_regs(struct tegra_dc *dc, + const struct reg_entry *table, + unsigned int num) +{ + unsigned int i; + + for (i = 0; i < num; i++) + tegra_dc_writel(dc, table[i].value, table[i].offset); +} + +static int tegra_output_rgb_enable(struct tegra_output *output) +{ + struct tegra_rgb *rgb = to_rgb(output); + unsigned long value; + + if (rgb->enabled) + return 0; + + tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); + + value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; + tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS); + + /* XXX: parameterize? */ + value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1)); + value &= ~LVS_OUTPUT_POLARITY_LOW; + value &= ~LHS_OUTPUT_POLARITY_LOW; + tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1)); + + /* XXX: parameterize? */ + value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB | + DISP_ORDER_RED_BLUE; + tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL); + + /* XXX: parameterize? */ + value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE; + tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS); + + value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_COMMAND); + value &= ~DISP_CTRL_MODE_MASK; + value |= DISP_CTRL_MODE_C_DISPLAY; + tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_COMMAND); + + value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_POWER_CONTROL); + value |= PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE | + PW4_ENABLE | PM0_ENABLE | PM1_ENABLE; + tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_POWER_CONTROL); + + tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL); + tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL); + + rgb->enabled = true; + + return 0; +} + +static int tegra_output_rgb_disable(struct tegra_output *output) +{ + struct tegra_rgb *rgb = to_rgb(output); + unsigned long value; + + if (!rgb->enabled) + return 0; + + value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_POWER_CONTROL); + value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE | + PW4_ENABLE | PM0_ENABLE | PM1_ENABLE); + tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_POWER_CONTROL); + + value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_COMMAND); + value &= ~DISP_CTRL_MODE_MASK; + tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_COMMAND); + + tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL); + tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL); + + tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); + + rgb->enabled = false; + + return 0; +} + +static int tegra_output_rgb_setup_clock(struct tegra_output *output, + struct clk *clk, unsigned long pclk, + unsigned int *div) +{ + struct tegra_rgb *rgb = to_rgb(output); + int err; + + err = clk_set_parent(clk, rgb->clk_parent); + if (err < 0) { + dev_err(output->dev, "failed to set parent: %d\n", err); + return err; + } + + /* + * We may not want to change the frequency of the parent clock, since + * it may be a parent for other peripherals. This is due to the fact + * that on Tegra20 there's only a single clock dedicated to display + * (pll_d_out0), whereas later generations have a second one that can + * be used to independently drive a second output (pll_d2_out0). + * + * As a way to support multiple outputs on Tegra20 as well, pll_p is + * typically used as the parent clock for the display controllers. + * But this comes at a cost: pll_p is the parent of several other + * peripherals, so its frequency shouldn't change out of the blue. + * + * The best we can do at this point is to use the shift clock divider + * and hope that the desired frequency can be matched (or at least + * matched sufficiently close that the panel will still work). + */ + + *div = ((clk_get_rate(clk) * 2) / pclk) - 2; + + return 0; +} + +static int tegra_output_rgb_check_mode(struct tegra_output *output, + struct drm_display_mode *mode, + enum drm_mode_status *status) +{ + /* + * FIXME: For now, always assume that the mode is okay. There are + * unresolved issues with clk_round_rate(), which doesn't always + * reliably report whether a frequency can be set or not. + */ + + *status = MODE_OK; + + return 0; +} + +static const struct tegra_output_ops rgb_ops = { + .enable = tegra_output_rgb_enable, + .disable = tegra_output_rgb_disable, + .setup_clock = tegra_output_rgb_setup_clock, + .check_mode = tegra_output_rgb_check_mode, +}; + +int tegra_dc_rgb_probe(struct tegra_dc *dc) +{ + struct device_node *np; + struct tegra_rgb *rgb; + int err; + + np = of_get_child_by_name(dc->dev->of_node, "rgb"); + if (!np || !of_device_is_available(np)) + return -ENODEV; + + rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL); + if (!rgb) + return -ENOMEM; + + rgb->output.dev = dc->dev; + rgb->output.of_node = np; + rgb->dc = dc; + + err = tegra_output_probe(&rgb->output); + if (err < 0) + return err; + + rgb->clk = devm_clk_get(dc->dev, NULL); + if (IS_ERR(rgb->clk)) { + dev_err(dc->dev, "failed to get clock\n"); + return PTR_ERR(rgb->clk); + } + + rgb->clk_parent = devm_clk_get(dc->dev, "parent"); + if (IS_ERR(rgb->clk_parent)) { + dev_err(dc->dev, "failed to get parent clock\n"); + return PTR_ERR(rgb->clk_parent); + } + + err = clk_set_parent(rgb->clk, rgb->clk_parent); + if (err < 0) { + dev_err(dc->dev, "failed to set parent clock: %d\n", err); + return err; + } + + dc->rgb = &rgb->output; + + return 0; +} + +int tegra_dc_rgb_remove(struct tegra_dc *dc) +{ + int err; + + if (!dc->rgb) + return 0; + + err = tegra_output_remove(dc->rgb); + if (err < 0) + return err; + + return 0; +} + +int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc) +{ + struct tegra_rgb *rgb = to_rgb(dc->rgb); + int err; + + if (!dc->rgb) + return -ENODEV; + + rgb->output.type = TEGRA_OUTPUT_RGB; + rgb->output.ops = &rgb_ops; + + err = tegra_output_init(dc->base.dev, &rgb->output); + if (err < 0) { + dev_err(dc->dev, "output setup failed: %d\n", err); + return err; + } + + /* + * By default, outputs can be associated with each display controller. + * RGB outputs are an exception, so we make sure they can be attached + * to only their parent display controller. + */ + rgb->output.encoder.possible_crtcs = drm_crtc_mask(&dc->base); + + return 0; +} + +int tegra_dc_rgb_exit(struct tegra_dc *dc) +{ + if (dc->rgb) { + int err; + + err = tegra_output_disable(dc->rgb); + if (err < 0) { + dev_err(dc->dev, "output failed to disable: %d\n", err); + return err; + } + + err = tegra_output_exit(dc->rgb); + if (err < 0) { + dev_err(dc->dev, "output cleanup failed: %d\n", err); + return err; + } + + dc->rgb = NULL; + } + + return 0; +} |