diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 1957 |
1 files changed, 1467 insertions, 490 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 04b269d14a5..92be50c39ff 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -74,6 +74,8 @@ #define ATOM_PPLL2 1 #define ATOM_DCPLL 2 #define ATOM_PPLL0 2 +#define ATOM_PPLL3 3 + #define ATOM_EXT_PLL1 8 #define ATOM_EXT_PLL2 9 #define ATOM_EXT_CLOCK 10 @@ -101,6 +103,7 @@ #define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5) #define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5) #define ATOM_ENCODER_INIT (ATOM_DISABLE+7) +#define ATOM_INIT (ATOM_DISABLE+7) #define ATOM_GET_STATUS (ATOM_DISABLE+8) #define ATOM_BLANKING 1 @@ -251,26 +254,26 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1 USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1 USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2 - USHORT DynamicClockGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock - USHORT MemoryPLLInit; - USHORT AdjustDisplayPll; //only used by Bios + USHORT MemoryPLLInit; //Atomic Table, used only by Bios + USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes. USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios - USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios + USHORT SetUniphyInstance; //Atomic Table, only used by Bios USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2 USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3 - USHORT LCD1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead - USHORT GetConditionalGoldenSetting; //only used by Bios + USHORT GetConditionalGoldenSetting; //Only used by Bios USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1 - USHORT TMDSAEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3 - USHORT LVDSEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3 - USHORT TV1OutputControl; //Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead + USHORT PatchMCSetting; //only used by BIOS + USHORT MC_SEQ_Control; //only used by BIOS + USHORT Gfx_Harvesting; //Atomic Table, Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting USHORT EnableScaler; //Atomic Table, used only by Bios USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 @@ -282,7 +285,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetCRTC_Replication; //Atomic Table, used only by Bios USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios - USHORT UpdateCRTC_DoubleBufferRegisters; + USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios USHORT LUT_AutoFill; //Atomic Table, only used by Bios USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1 @@ -308,27 +311,36 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1 USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 - USHORT SetupHWAssistedI2CStatus; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" + USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock - USHORT EnableYUV; //Atomic Table, indirectly used by various SW components,called from EnableVGARender + USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios USHORT DPEncoderService; //Function Table,only used by Bios + USHORT GetVoltageInfo; //Function Table,only used by Bios since SI }ATOM_MASTER_LIST_OF_COMMAND_TABLES; // For backward compatible #define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction -#define UNIPHYTransmitterControl DIG1TransmitterControl -#define LVTMATransmitterControl DIG2TransmitterControl +#define DPTranslatorControl DIG2EncoderControl +#define UNIPHYTransmitterControl DIG1TransmitterControl +#define LVTMATransmitterControl DIG2TransmitterControl #define SetCRTC_DPM_State GetConditionalGoldenSetting -#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange +#define ASIC_StaticPwrMgtStatusChange SetUniphyInstance #define HPDInterruptService ReadHWAssistedI2CStatus #define EnableVGA_Access GetSCLKOverMCLKRatio -#define GetDispObjectInfo EnableYUV +#define EnableYUV GetDispObjectInfo +#define DynamicClockGating EnableDispPowerGating +#define SetupHWAssistedI2CStatus ComputeMemoryClockParam + +#define TMDSAEncoderControl PatchMCSetting +#define LVDSEncoderControl MC_SEQ_Control +#define LCD1OutputControl HW_Misc_Operation +#define TV1OutputControl Gfx_Harvesting typedef struct _ATOM_MASTER_COMMAND_TABLE { @@ -448,6 +460,7 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 union { ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulClockParams; //ULONG access for BE ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter }; UCHAR ucRefDiv; //Output Parameter @@ -467,11 +480,11 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 { #if ATOM_BIG_ENDIAN - ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly + ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly ULONG ulClock:24; //Input= target clock, output = actual clock #else ULONG ulClock:24; //Input= target clock, output = actual clock - ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly + ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly #endif }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4; @@ -480,6 +493,7 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 union { ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulClockParams; //ULONG access for BE ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter }; UCHAR ucRefDiv; //Output Parameter @@ -492,9 +506,63 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 UCHAR ucReserved; }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5; + +typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6 +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulReserved[2]; +}COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6; + +//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag +#define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK 0x0f +#define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK 0x00 +#define COMPUTE_GPUCLK_INPUT_FLAG_SCLK 0x01 + +typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6 +{ + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock; //Output Parameter: ucPostDiv=DFS divider + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter: PLL FB divider + UCHAR ucPllRefDiv; //Output Parameter: PLL ref divider + UCHAR ucPllPostDiv; //Output Parameter: PLL post divider + UCHAR ucPllCntlFlag; //Output Flags: control flag + UCHAR ucReserved; +}COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6; + +//ucPllCntlFlag +#define SPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 + + // ucInputFlag #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode +// use for ComputeMemoryClockParamTable +typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1 +{ + union + { + ULONG ulClock; + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS) + }; + UCHAR ucDllSpeed; //Output + UCHAR ucPostDiv; //Output + union{ + UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode + UCHAR ucPllCntlFlag; //Output: + }; + UCHAR ucBWCntl; +}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1; + +// definition of ucInputFlag +#define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01 +// definition of ucPllCntlFlag +#define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 +#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04 +#define MPLL_CNTL_FLAG_QDR_ENABLE 0x08 +#define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10 + +//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL +#define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04 + typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER { ATOM_COMPUTE_CLOCK_FREQ ulClock; @@ -562,6 +630,16 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS #define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS /****************************************************************************/ +// Structure used by EnableDispPowerGatingTable.ctb +/****************************************************************************/ +typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 +{ + UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ... + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[2]; +}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1; + +/****************************************************************************/ // Structure used by EnableASIC_StaticPwrMgtTable.ctb /****************************************************************************/ typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS @@ -726,6 +804,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 #define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d #define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS 0x0e #define ATOM_ENCODER_CMD_SETUP 0x0f +#define ATOM_ENCODER_CMD_SETUP_PANEL_MODE 0x10 // ucStatus #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10 @@ -738,13 +817,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:3; UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz #else UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz UCHAR ucReserved:3; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V3; @@ -765,13 +844,19 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3 USHORT usPixelClock; // in 10KHz; for bios convenient ATOM_DIG_ENCODER_CONFIG_V3 acConfig; UCHAR ucAction; - UCHAR ucEncoderMode; + union { + UCHAR ucEncoderMode; // =0: DP encoder // =1: LVDS encoder // =2: DVI encoder // =3: HDMI encoder // =4: SDVO encoder // =5: DP audio + UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE + // =0: external DP + // =1: internal DP2 + // =0x11: internal DP1 for NutMeg/Travis DP translator + }; UCHAR ucLaneNum; // how many lanes to enable UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP UCHAR ucReserved; @@ -785,13 +870,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved:2; UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version #else UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version UCHAR ucReserved:2; - UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V4; @@ -800,6 +885,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10 @@ -807,6 +893,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50 +#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 { @@ -816,13 +903,19 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 UCHAR ucConfig; }; UCHAR ucAction; - UCHAR ucEncoderMode; + union { + UCHAR ucEncoderMode; // =0: DP encoder // =1: LVDS encoder // =2: DVI encoder // =3: HDMI encoder // =4: SDVO encoder // =5: DP audio + UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE + // =0: external DP + // =1: internal DP2 + // =0x11: internal DP1 for NutMeg/Travis DP translator + }; UCHAR ucLaneNum; // how many lanes to enable UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version @@ -836,6 +929,11 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 #define PANEL_12BIT_PER_COLOR 0x04 #define PANEL_16BIT_PER_COLOR 0x05 +//define ucPanelMode +#define DP_PANEL_MODE_EXTERNAL_DP_MODE 0x00 +#define DP_PANEL_MODE_INTERNAL_DP2_MODE 0x01 +#define DP_PANEL_MODE_INTERNAL_DP1_MODE 0x11 + /****************************************************************************/ // Structures used by UNIPHYTransmitterControlTable // LVTMATransmitterControlTable @@ -1153,6 +1251,106 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReservd1:1; + UCHAR ucHPDSel:3; + UCHAR ucPhyClkSrcId:2; + UCHAR ucCoherentMode:1; + UCHAR ucReserved:1; +#else + UCHAR ucReserved:1; + UCHAR ucCoherentMode:1; + UCHAR ucPhyClkSrcId:2; + UCHAR ucHPDSel:3; + UCHAR ucReservd1:1; +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V5; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 +{ + USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio + UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx + UCHAR ucLaneNum; // indicate lane number 1-8 + UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h + UCHAR ucDigMode; // indicate DIG mode + union{ + ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; + UCHAR ucConfig; + }; + UCHAR ucDigEncoderSel; // indicate DIG front end encoder + UCHAR ucDPLaneSet; + UCHAR ucReserved; + UCHAR ucReserved1; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5; + +//ucPhyId +#define ATOM_PHY_ID_UNIPHYA 0 +#define ATOM_PHY_ID_UNIPHYB 1 +#define ATOM_PHY_ID_UNIPHYC 2 +#define ATOM_PHY_ID_UNIPHYD 3 +#define ATOM_PHY_ID_UNIPHYE 4 +#define ATOM_PHY_ID_UNIPHYF 5 +#define ATOM_PHY_ID_UNIPHYG 6 + +// ucDigEncoderSel +#define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01 +#define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02 +#define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04 +#define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08 +#define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10 +#define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20 +#define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40 + +// ucDigMode +#define ATOM_TRANSMITTER_DIGMODE_V5_DP 0 +#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1 +#define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2 +#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3 +#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4 +#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5 + +// ucDPLaneSet +#define DP_LANE_SET__0DB_0_4V 0x00 +#define DP_LANE_SET__0DB_0_6V 0x01 +#define DP_LANE_SET__0DB_0_8V 0x02 +#define DP_LANE_SET__0DB_1_2V 0x03 +#define DP_LANE_SET__3_5DB_0_4V 0x08 +#define DP_LANE_SET__3_5DB_0_6V 0x09 +#define DP_LANE_SET__3_5DB_0_8V 0x0a +#define DP_LANE_SET__6DB_0_4V 0x10 +#define DP_LANE_SET__6DB_0_6V 0x11 +#define DP_LANE_SET__9_5DB_0_4V 0x18 + +// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; +// Bit1 +#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02 + +// Bit3:2 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02 + +#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04 +#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c +// Bit6:4 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04 + +#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60 + +#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 + + /****************************************************************************/ // Structures used by ExternalEncoderControlTable V1.3 // ASIC Families: Evergreen, Llano, NI @@ -1182,6 +1380,7 @@ typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11 #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12 +#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14 // ucConfig #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 @@ -1512,9 +1711,12 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V6 #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04 +#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1) #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08 +#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4) #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10 +#define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2 { @@ -1774,6 +1976,7 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2 #define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00 #define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04 #define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08 +#define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00 @@ -1930,6 +2133,17 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 }DVO_ENCODER_CONTROL_PARAMETERS_V3; #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3 +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4 +{ + USHORT usPixelClock; + UCHAR ucDVOConfig; + UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT + UCHAR ucBitPerColor; //please refer to definition of PANEL_xBIT_PER_COLOR + UCHAR ucReseved[3]; +}DVO_ENCODER_CONTROL_PARAMETERS_V1_4; +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4 DVO_ENCODER_CONTROL_PARAMETERS_V1_4 + + //ucTableFormatRevision=1 //ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for // bit1=0: non-coherent mode @@ -1993,7 +2207,7 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 #define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4 #define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 -#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 #define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 typedef struct _SET_VOLTAGE_PARAMETERS @@ -2011,12 +2225,103 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V2 USHORT usVoltageLevel; // real voltage level }SET_VOLTAGE_PARAMETERS_V2; +// used by both SetVoltageTable v1.3 and v1.4 +typedef struct _SET_VOLTAGE_PARAMETERS_V1_3 +{ + UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Indicate action: Set voltage level + USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) +}SET_VOLTAGE_PARAMETERS_V1_3; + +//ucVoltageType +#define VOLTAGE_TYPE_VDDC 1 +#define VOLTAGE_TYPE_MVDDC 2 +#define VOLTAGE_TYPE_MVDDQ 3 +#define VOLTAGE_TYPE_VDDCI 4 + +//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode +#define ATOM_SET_VOLTAGE 0 //Set voltage Level +#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator +#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase, only for SVID/PVID regulator +#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used from SetVoltageTable v1.3 +#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4 +#define ATOM_GET_LEAKAGE_ID 8 //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4 + +// define vitual voltage id in usVoltageLevel +#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01 +#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02 +#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03 +#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04 +#define ATOM_VIRTUAL_VOLTAGE_ID4 0xff05 +#define ATOM_VIRTUAL_VOLTAGE_ID5 0xff06 +#define ATOM_VIRTUAL_VOLTAGE_ID6 0xff07 +#define ATOM_VIRTUAL_VOLTAGE_ID7 0xff08 + typedef struct _SET_VOLTAGE_PS_ALLOCATION { SET_VOLTAGE_PARAMETERS sASICSetVoltage; WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; }SET_VOLTAGE_PS_ALLOCATION; +// New Added from SI for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulReserved; +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID +typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + ULONG ulVotlageGpioState; + ULONG ulVoltageGPioMask; +}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID +typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + USHORT usVoltageLevel; + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + + +// GetVoltageInfo v1.1 ucVoltageMode +#define ATOM_GET_VOLTAGE_VID 0x00 +#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03 +#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04 +#define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info + +// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state +#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 +// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state +#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11 + +#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12 +#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13 + +// New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2; + +// New in GetVoltageInfo v1.2 ucVoltageMode +#define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09 + +// New Added from CI Hawaii for EVV feature +typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2 +{ + USHORT usVoltageLevel; // real voltage level in unit of mv + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2; + /****************************************************************************/ // Structures used by TVEncoderControlTable /****************************************************************************/ @@ -2046,9 +2351,9 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios USHORT StandardVESA_Timing; // Only used by Bios USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4 - USHORT DAC_Info; // Will be obsolete from R600 + USHORT PaletteData; // Only used by BIOS USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info - USHORT TMDS_Info; // Will be obsolete from R600 + USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1 USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1 USHORT SupportedDevicesInfo; // Will be obsolete from R600 USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600 @@ -2077,15 +2382,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1 }ATOM_MASTER_LIST_OF_DATA_TABLES; -// For backward compatible -#define LVDS_Info LCD_Info - typedef struct _ATOM_MASTER_DATA_TABLE { ATOM_COMMON_TABLE_HEADER sHeader; ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; }ATOM_MASTER_DATA_TABLE; +// For backward compatible +#define LVDS_Info LCD_Info +#define DAC_Info PaletteData +#define TMDS_Info DIGTransmitterInfo /****************************************************************************/ // Structure used in MultimediaCapabilityInfoTable @@ -2126,7 +2432,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO // Structures used in FirmwareInfoTable /****************************************************************************/ -// usBIOSCapability Defintion: +// usBIOSCapability Definition: // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; @@ -2152,7 +2458,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO typedef struct _ATOM_FIRMWARE_CAPABILITY { #if ATOM_BIG_ENDIAN - USHORT Reserved:3; + USHORT Reserved:1; + USHORT SCL2Redefined:1; + USHORT PostWithoutModeSet:1; USHORT HyperMemory_Size:4; USHORT HyperMemory_Support:1; USHORT PPMode_Assigned:1; @@ -2174,7 +2482,9 @@ typedef struct _ATOM_FIRMWARE_CAPABILITY USHORT PPMode_Assigned:1; USHORT HyperMemory_Support:1; USHORT HyperMemory_Size:4; - USHORT Reserved:3; + USHORT PostWithoutModeSet:1; + USHORT SCL2Redefined:1; + USHORT Reserved:1; #endif }ATOM_FIRMWARE_CAPABILITY; @@ -2386,7 +2696,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2 ULONG ulFirmwareRevision; ULONG ulDefaultEngineClock; //In 10Khz unit ULONG ulDefaultMemoryClock; //In 10Khz unit - ULONG ulReserved[2]; + ULONG ulSPLL_OutputFreq; //In 10Khz unit + ULONG ulGPUPLL_OutputFreq; //In 10Khz unit ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit* ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit* ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit @@ -2399,7 +2710,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2 USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit ULONG ulReserved4; //Was ulAsicMaximumVoltage ULONG ulMinPixelClockPLL_Output; //In 10Khz unit - ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input + UCHAR ucRemoteDisplayConfig; + UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC @@ -2419,6 +2731,11 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2 #define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2 + +// definition of ucRemoteDisplayConfig +#define REMOTE_DISPLAY_DISABLE 0x00 +#define REMOTE_DISPLAY_ENABLE 0x01 + /****************************************************************************/ // Structures used in IntegratedSystemInfoTable /****************************************************************************/ @@ -2641,8 +2958,9 @@ usMinDownStreamHTLinkWidth: same as above. #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5 -#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 @@ -2734,6 +3052,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5 #define ASIC_INT_DIG4_ENCODER_ID 0x0b #define ASIC_INT_DIG5_ENCODER_ID 0x0c #define ASIC_INT_DIG6_ENCODER_ID 0x0d +#define ASIC_INT_DIG7_ENCODER_ID 0x0e //define Encoder attribute #define ATOM_ANALOG_ENCODER 0 @@ -3207,15 +3526,23 @@ typedef struct _ATOM_LCD_INFO_V13 UCHAR ucPowerSequenceDIGONtoDE_in4Ms; UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms; - UCHAR ucPowerSequenceDEtoDIGON_in4Ms; UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms; + UCHAR ucPowerSequenceDEtoDIGON_in4Ms; UCHAR ucOffDelay_in4Ms; UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms; UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms; UCHAR ucReserved1; - ULONG ulReserved[4]; + UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh + UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h + UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h + UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h + + USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode. + UCHAR uceDPToLVDSRxId; + UCHAR ucLcdReservd; + ULONG ulReserved[2]; }ATOM_LCD_INFO_V13; #define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13 @@ -3254,6 +3581,11 @@ typedef struct _ATOM_LCD_INFO_V13 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. #define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version +//uceDPToLVDSRxId +#define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip +#define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init +#define eDP_TO_LVDS_RT_ID 0x02 // RT tanslator which require AMD SW init + typedef struct _ATOM_PATCH_RECORD_MODE { UCHAR ucRecordType; @@ -3298,6 +3630,7 @@ typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD #define LCD_CAP_RECORD_TYPE 3 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4 #define LCD_PANEL_RESOLUTION_RECORD_TYPE 5 +#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6 #define ATOM_RECORD_END_TYPE 0xFF /****************************Spread Spectrum Info Table Definitions **********************/ @@ -3341,7 +3674,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO /****************************************************************************/ // Structure used in AnalogTV_InfoTable (Top level) /****************************************************************************/ -//ucTVBootUpDefaultStd definiton: +//ucTVBootUpDefaultStd definition: //ATOM_TV_NTSC 1 //ATOM_TV_NTSCJ 2 @@ -3509,6 +3842,7 @@ else //Non VGA case CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/ +/***********************************************************************************/ #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO @@ -3548,6 +3882,14 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT UCHAR ucGPIO_ID; }ATOM_GPIO_PIN_ASSIGNMENT; +//ucGPIO_ID pre-define id for multiple usage +//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable +#define PP_AC_DC_SWITCH_GPIO_PINID 60 +//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable +#define VDDC_VRHOT_GPIO_PINID 61 +//if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled +#define VDDC_PCC_GPIO_PINID 62 + typedef struct _ATOM_GPIO_PIN_LUT { ATOM_COMMON_TABLE_HEADER sHeader; @@ -3799,24 +4141,32 @@ typedef struct _EXT_DISPLAY_PATH ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; }; - UCHAR ucReserved; - USHORT usReserved[2]; + UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted + USHORT usCaps; + USHORT usReserved; }EXT_DISPLAY_PATH; #define NUMBER_OF_UCHAR_FOR_GUID 16 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7 +//usCaps +#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01 +#define EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN 0x02 + typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO { ATOM_COMMON_TABLE_HEADER sHeader; UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries. - UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. + UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. UCHAR uc3DStereoPinId; // use for eDP panel - UCHAR Reserved [6]; // for potential expansion + UCHAR ucRemoteDisplayConfig; + UCHAR uceDPToLVDSRxId; + UCHAR ucFixDPVoltageSwing; // usCaps[1]=1, this indicate DP_LANE_SET value + UCHAR Reserved[3]; // for potential expansion }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; -//Related definitions, all records are differnt but they have a commond header +//Related definitions, all records are different but they have a commond header typedef struct _ATOM_COMMON_RECORD_HEADER { UCHAR ucRecordType; //An emun to indicate the record type @@ -3844,10 +4194,10 @@ typedef struct _ATOM_COMMON_RECORD_HEADER #define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19 #define ATOM_ENCODER_CAP_RECORD_TYPE 20 - +#define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21 //Must be updated when new record type is added,equal to that record definition! -#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE +#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_BRACKET_LAYOUT_RECORD_TYPE typedef struct _ATOM_I2C_RECORD { @@ -3958,6 +4308,7 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD #define GPIO_PIN_STATE_ACTIVE_HIGH 0x1 // Indexes to GPIO array in GLSync record +// GLSync record is for Frame Lock/Gen Lock feature. #define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2 @@ -3965,7 +4316,9 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6 -#define ATOM_GPIO_INDEX_GLSYNC_MAX 7 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8 +#define ATOM_GPIO_INDEX_GLSYNC_MAX 9 typedef struct _ATOM_ENCODER_DVO_CF_RECORD { @@ -3975,7 +4328,8 @@ typedef struct _ATOM_ENCODER_DVO_CF_RECORD }ATOM_ENCODER_DVO_CF_RECORD; // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap -#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path +#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder +#define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled typedef struct _ATOM_ENCODER_CAP_RECORD { @@ -3984,11 +4338,13 @@ typedef struct _ATOM_ENCODER_CAP_RECORD USHORT usEncoderCap; struct { #if ATOM_BIG_ENDIAN - USHORT usReserved:15; // Bit1-15 may be defined for other capability in future + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. #else USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. - USHORT usReserved:15; // Bit1-15 may be defined for other capability in future + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future #endif }; }; @@ -4066,6 +4422,31 @@ typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD USHORT usReserved; }ATOM_CONNECTOR_REMOTE_CAP_RECORD; +typedef struct _ATOM_CONNECTOR_LAYOUT_INFO +{ + USHORT usConnectorObjectId; + UCHAR ucConnectorType; + UCHAR ucPosition; +}ATOM_CONNECTOR_LAYOUT_INFO; + +// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size +#define CONNECTOR_TYPE_DVI_D 1 +#define CONNECTOR_TYPE_DVI_I 2 +#define CONNECTOR_TYPE_VGA 3 +#define CONNECTOR_TYPE_HDMI 4 +#define CONNECTOR_TYPE_DISPLAY_PORT 5 +#define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6 + +typedef struct _ATOM_BRACKET_LAYOUT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucLength; + UCHAR ucWidth; + UCHAR ucConnNum; + UCHAR ucReserved; + ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1]; +}ATOM_BRACKET_LAYOUT_RECORD; + /****************************************************************************/ // ASIC voltage data table /****************************************************************************/ @@ -4138,6 +4519,14 @@ typedef struct _ATOM_VOLTAGE_CONTROL #define VOLTAGE_CONTROL_ID_VT1556M 0x07 #define VOLTAGE_CONTROL_ID_CHL822x 0x08 #define VOLTAGE_CONTROL_ID_VT1586M 0x09 +#define VOLTAGE_CONTROL_ID_UP1637 0x0A +#define VOLTAGE_CONTROL_ID_CHL8214 0x0B +#define VOLTAGE_CONTROL_ID_UP1801 0x0C +#define VOLTAGE_CONTROL_ID_ST6788A 0x0D +#define VOLTAGE_CONTROL_ID_CHLIR3564SVI2 0x0E +#define VOLTAGE_CONTROL_ID_AD527x 0x0F +#define VOLTAGE_CONTROL_ID_NCP81022 0x10 +#define VOLTAGE_CONTROL_ID_LTC2635 0x11 typedef struct _ATOM_VOLTAGE_OBJECT { @@ -4174,6 +4563,100 @@ typedef struct _ATOM_LEAKID_VOLTAGE USHORT usVoltage; }ATOM_LEAKID_VOLTAGE; +typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{ + UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI + UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase + USHORT usSize; //Size of Object +}ATOM_VOLTAGE_OBJECT_HEADER_V3; + +// ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode +#define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_EVV 8 +#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 + +typedef struct _VOLTAGE_LUT_ENTRY_V2 +{ + ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register + USHORT usVoltageValue; // The corresponding Voltage Value, in mV +}VOLTAGE_LUT_ENTRY_V2; + +typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2 +{ + USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register + USHORT usVoltageId; + USHORT usLeakageId; // The corresponding Voltage Value, in mV +}LEAKAGE_VOLTAGE_LUT_ENTRY_V2; + +typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ + UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; + ULONG ulReserved; + VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff +}ATOM_I2C_VOLTAGE_OBJECT_V3; + +// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag +#define VOLTAGE_DATA_ONE_BYTE 0 +#define VOLTAGE_DATA_TWO_BYTE 1 + +typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT + UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode + UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table + UCHAR ucPhaseDelay; // phase delay in unit of micro second + UCHAR ucReserved; + ULONG ulGpioMaskVal; // GPIO Mask value + VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1]; +}ATOM_GPIO_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = 0x10/0x11/0x12 + UCHAR ucLeakageCntlId; // default is 0 + UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table + UCHAR ucReserved[2]; + ULONG ulMaxVoltageLevel; + LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1]; +}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3; + + +typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_SVID2 +// 14:7 – PSI0_VID +// 6 – PSI0_EN +// 5 – PSI1 +// 4:2 – load line slope trim. +// 1:0 – offset trim, + USHORT usLoadLine_PSI; +// GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31 + UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31 + UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31 + ULONG ulReserved; +}ATOM_SVID2_VOLTAGE_OBJECT_V3; + +typedef union _ATOM_VOLTAGE_OBJECT_V3{ + ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj; + ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj; + ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj; + ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj; +}ATOM_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control +}ATOM_VOLTAGE_OBJECT_INFO_V3_1; + typedef struct _ATOM_ASIC_PROFILE_VOLTAGE { UCHAR ucProfileId; @@ -4195,6 +4678,64 @@ typedef struct _ATOM_ASIC_PROFILING_INFO ATOM_ASIC_PROFILE_VOLTAGE asVoltage; }ATOM_ASIC_PROFILING_INFO; +typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + UCHAR ucLeakageBinNum; // indicate the entry number of LeakageId/Voltage Lut table + USHORT usLeakageBinArrayOffset; // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher) + + UCHAR ucElbVDDC_Num; + USHORT usElbVDDC_IdArrayOffset; // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 ) + USHORT usElbVDDC_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array + + UCHAR ucElbVDDCI_Num; + USHORT usElbVDDCI_IdArrayOffset; // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 ) + USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array +}ATOM_ASIC_PROFILING_INFO_V2_1; + +typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ULONG ulEvvDerateTdp; + ULONG ulEvvDerateTdc; + ULONG ulBoardCoreTemp; + ULONG ulMaxVddc; + ULONG ulMinVddc; + ULONG ulLoadLineSlop; + ULONG ulLeakageTemp; + ULONG ulLeakageVoltage; + ULONG ulCACmEncodeRange; + ULONG ulCACmEncodeAverage; + ULONG ulCACbEncodeRange; + ULONG ulCACbEncodeAverage; + ULONG ulKt_bEncodeRange; + ULONG ulKt_bEncodeAverage; + ULONG ulKv_mEncodeRange; + ULONG ulKv_mEncodeAverage; + ULONG ulKv_bEncodeRange; + ULONG ulKv_bEncodeAverage; + ULONG ulLkgEncodeLn_MaxDivMin; + ULONG ulLkgEncodeMin; + ULONG ulEfuseLogisticAlpha; + USHORT usPowerDpm0; + USHORT usCurrentDpm0; + USHORT usPowerDpm1; + USHORT usCurrentDpm1; + USHORT usPowerDpm2; + USHORT usCurrentDpm2; + USHORT usPowerDpm3; + USHORT usCurrentDpm3; + USHORT usPowerDpm4; + USHORT usCurrentDpm4; + USHORT usPowerDpm5; + USHORT usCurrentDpm5; + USHORT usPowerDpm6; + USHORT usCurrentDpm6; + USHORT usPowerDpm7; + USHORT usCurrentDpm7; +}ATOM_ASIC_PROFILING_INFO_V3_1; + + typedef struct _ATOM_POWER_SOURCE_OBJECT { UCHAR ucPwrSrcId; // Power source @@ -4286,7 +4827,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 USHORT usHDMISSpreadRateIn10Hz; USHORT usDVISSPercentage; USHORT usDVISSpreadRateIn10Hz; - ULONG ulReserved3[21]; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucLVDSReserved; + ULONG ulReserved3[15]; ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; }ATOM_INTEGRATED_SYSTEM_INFO_V6; @@ -4294,9 +4846,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08 -// ulOtherDisplayMisc -#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 +//ucLVDSMisc: +#define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01 +#define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02 +#define SYS_INFO_LVDSMISC__888_BPC 0x04 +#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08 +#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10 +// new since Trinity +#define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN 0x20 +// not used any more +#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04 +#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08 /********************************************************************************************************************** ATOM_INTEGRATED_SYSTEM_INFO_V6 Description @@ -4379,8 +4940,495 @@ usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) **********************************************************************************************************************/ +// this Table is used for Liano/Ontario APU +typedef struct _ATOM_FUSION_SYSTEM_INFO_V1 +{ + ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo; + ULONG ulPowerplayTable[128]; +}ATOM_FUSION_SYSTEM_INFO_V1; + + +typedef struct _ATOM_TDP_CONFIG_BITS +{ +#if ATOM_BIG_ENDIAN + ULONG uReserved:2; + ULONG uTDP_Value:14; // Original TDP value in tens of milli watts + ULONG uCTDP_Value:14; // Override value in tens of milli watts + ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) +#else + ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) + ULONG uCTDP_Value:14; // Override value in tens of milli watts + ULONG uTDP_Value:14; // Original TDP value in tens of milli watts + ULONG uReserved:2; +#endif +}ATOM_TDP_CONFIG_BITS; + +typedef union _ATOM_TDP_CONFIG +{ + ATOM_TDP_CONFIG_BITS TDP_config; + ULONG TDP_config_all; +}ATOM_TDP_CONFIG; + +/********************************************************************************************************************** + ATOM_FUSION_SYSTEM_INFO_V1 Description +sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition. +ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0] +**********************************************************************************************************************/ + +// this IntegrateSystemInfoTable is used for Trinity APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulGPUCapInfo; + ULONG ulSB_MMIO_Base_Addr; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulMinEngineClock; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + USHORT usNBP0Voltage; + USHORT usNBP1Voltage; + USHORT usBootUpNBVoltage; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + UCHAR strVBIOSMsg[40]; + ATOM_TDP_CONFIG asTdpConfig; + ULONG ulReserved[19]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulMinimumNClk; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucTravisLVDSVolAdjust; + UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; + UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; + UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; + UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; + UCHAR ucLVDSOffToOnDelay_in4Ms; + UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; + UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; + UCHAR ucMinAllowedBL_Level; + ULONG ulLCDBitDepthControlVal; + ULONG ulNbpStateMemclkFreq[4]; + USHORT usNBP2Voltage; + USHORT usNBP3Voltage; + ULONG ulNbpStateNClkFreq[4]; + UCHAR ucNBDPMEnable; + UCHAR ucReserved[3]; + UCHAR ucDPMState0VclkFid; + UCHAR ucDPMState0DclkFid; + UCHAR ucDPMState1VclkFid; + UCHAR ucDPMState1DclkFid; + UCHAR ucDPMState2VclkFid; + UCHAR ucDPMState2DclkFid; + UCHAR ucDPMState3VclkFid; + UCHAR ucDPMState3DclkFid; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V1_7; + +// ulOtherDisplayMisc +#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 +#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02 +#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04 +#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08 + +// ulGPUCapInfo +#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 +#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02 +#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08 +#define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10 + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock voltage requirement. + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 +ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. + =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. + bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS + =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS + bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS + =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS + bit[3]=0: VBIOS fast boot is disable + =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) +ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. + =1: TMDS/HDMI Coherent Mode use signel PLL mode. + bit[1]=0: DP mode use cascade PLL mode ( New for Trinity ) + =1: DP mode use single PLL mode + bit[3]=0: Enable AUX HW mode detection logic + =1: Disable AUX HW mode detection logic + +ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. + Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. +ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. +ulCPUCapInfo: TBD +usNBP0Voltage: VID for voltage on NB P0 State +usNBP1Voltage: VID for voltage on NB P1 State +usNBP2Voltage: VID for voltage on NB P2 State +usNBP3Voltage: VID for voltage on NB P3 State +usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. +ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default +ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. +ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. +ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) + [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 +ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust + value to program Travis register LVDS_CTRL_4 +ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). + =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. + =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. + =0 means to use VBIOS default delay which is 125 ( 500ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: + LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. + +ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate. + +**********************************************************************************************************************/ + +// this IntegrateSystemInfoTable is used for Kaveri & Kabini APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulVBIOSMisc; + ULONG ulGPUCapInfo; + ULONG ulDISP_CLK2Freq; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulReserved2; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + ULONG ulReserved3; + USHORT usGPUReservedSysMemSize; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + UCHAR strVBIOSMsg[40]; + ATOM_TDP_CONFIG asTdpConfig; + ULONG ulReserved[19]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulReserved4; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG ulGPUReservedSysMemBaseAddrLo; + ULONG ulGPUReservedSysMemBaseAddrHi; + ULONG ulReserved5[3]; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucTravisLVDSVolAdjust; + UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; + UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; + UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; + UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; + UCHAR ucLVDSOffToOnDelay_in4Ms; + UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; + UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; + UCHAR ucMinAllowedBL_Level; + ULONG ulLCDBitDepthControlVal; + ULONG ulNbpStateMemclkFreq[4]; + ULONG ulReserved6; + ULONG ulNbpStateNClkFreq[4]; + USHORT usNBPStateVoltage[4]; + USHORT usBootUpNBVoltage; + USHORT usReserved2; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V1_8; + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels). + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 + +ulVBIOSMisc: Miscellenous flags for VBIOS requirement and interface + bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. + =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. + bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS + =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS + bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS + =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS + bit[3]=0: VBIOS fast boot is disable + =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) + +ulGPUCapInfo: bit[0~2]= Reserved + bit[3]=0: Enable AUX HW mode detection logic + =1: Disable AUX HW mode detection logic + bit[4]=0: Disable DFS bypass feature + =1: Enable DFS bypass feature + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. + +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. + Bit[3]=0: GNB DPM is disabled + =1: GNB DPM is enabled +ulCPUCapInfo: TBD + +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 + +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. + +strVBIOSMsg[40]: VBIOS boot up customized message string + +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high + +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulIdleNClk: NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. + +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. + +usGPUReservedSysMemSize: Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB. +ulGPUReservedSysMemBaseAddrLo: Low 32 bits base address to the reserved system memory. +ulGPUReservedSysMemBaseAddrHi: High 32 bits base address to the reserved system memory. + +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) + [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 +ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust + value to program Travis register LVDS_CTRL_4 +ucLVDSPwrOnSeqDIGONtoDE_in4Ms: + LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). + =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnDEtoVARY_BL_in4Ms: + LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOffVARY_BLtoDE_in4Ms: + LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. + =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOffDEtoDIGON_in4Ms: + LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSOffToOnDelay_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. + =0 means to use VBIOS default delay which is 125 ( 500ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: + LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. + +ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL + +ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3). +ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State +usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage +usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded +sExtDispConnInfo: Display connector information table provided to VBIOS + +**********************************************************************************************************************/ + +// this Table is used for Kaveri/Kabini APU +typedef struct _ATOM_FUSION_SYSTEM_INFO_V2 +{ + ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition + ULONG ulPowerplayTable[128]; // Update comments here to link new powerplay table definition structure +}ATOM_FUSION_SYSTEM_INFO_V2; + + /**************************************************************************/ // This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design //Memory SS Info Table @@ -4431,21 +5479,24 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT //Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type. //SS is not required or enabled if a match is not found. -#define ASIC_INTERNAL_MEMORY_SS 1 -#define ASIC_INTERNAL_ENGINE_SS 2 -#define ASIC_INTERNAL_UVD_SS 3 -#define ASIC_INTERNAL_SS_ON_TMDS 4 -#define ASIC_INTERNAL_SS_ON_HDMI 5 -#define ASIC_INTERNAL_SS_ON_LVDS 6 -#define ASIC_INTERNAL_SS_ON_DP 7 -#define ASIC_INTERNAL_SS_ON_DCPLL 8 -#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 +#define ASIC_INTERNAL_MEMORY_SS 1 +#define ASIC_INTERNAL_ENGINE_SS 2 +#define ASIC_INTERNAL_UVD_SS 3 +#define ASIC_INTERNAL_SS_ON_TMDS 4 +#define ASIC_INTERNAL_SS_ON_HDMI 5 +#define ASIC_INTERNAL_SS_ON_LVDS 6 +#define ASIC_INTERNAL_SS_ON_DP 7 +#define ASIC_INTERNAL_SS_ON_DCPLL 8 +#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 +#define ASIC_INTERNAL_VCE_SS 10 +#define ASIC_INTERNAL_GPUPLL_SS 11 + typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2 { ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 ) - USHORT usSpreadSpectrumPercentage; //in unit of 0.01% + USHORT usSpreadSpectrumPercentage; //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4 USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq UCHAR ucClockIndication; //Indicate which clock source needs SS UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS @@ -4483,6 +5534,11 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3 UCHAR ucReserved[2]; }ATOM_ASIC_SS_ASSIGNMENT_V3; +//ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode +#define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01 +#define SS_MODE_V3_EXTERNAL_SS_MASK 0x02 +#define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10 + typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 { ATOM_COMMON_TABLE_HEADER sHeader; @@ -4501,7 +5557,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_DOS_MODE_INFO_DEF 7 #define ATOM_I2C_CHANNEL_STATUS_DEF 8 #define ATOM_I2C_CHANNEL_STATUS1_DEF 9 - +#define ATOM_INTERNAL_TIMER_DEF 10 // BIOS_0_SCRATCH Definition #define ATOM_S0_CRT1_MONO 0x00000001L @@ -4555,7 +5611,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4 -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S0_CRT1_MONOb0 0x01 #define ATOM_S0_CRT1_COLORb0 0x02 #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) @@ -4621,7 +5677,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF #define ATOM_S2_DEVICE_DPMS_STATEb2 0x01 @@ -4629,6 +5685,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10 +#define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode #define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20 #define ATOM_S2_ROTATION_STATE_MASKb3 0xC0 @@ -4671,7 +5728,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S3_CRT1_ACTIVEb0 0x01 #define ATOM_S3_LCD1_ACTIVEb0 0x02 #define ATOM_S3_TV1_ACTIVEb0 0x04 @@ -4707,7 +5764,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L #define ATOM_S4_LCD1_REFRESH_SHIFT 8 -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 @@ -4786,7 +5843,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L -//Byte aligned defintion for BIOS usage +//Byte aligned definition for BIOS usage #define ATOM_S6_DEVICE_CHANGEb0 0x01 #define ATOM_S6_SCALER_CHANGEb0 0x02 #define ATOM_S6_LID_CHANGEb0 0x04 @@ -4850,6 +5907,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0 #define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01 +#define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02 +#define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200 #define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8 @@ -5019,6 +6078,23 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3 USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0. }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3; +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4 +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + USHORT usGraphPitch; + UCHAR ucColorDepth; + UCHAR ucPixelFormat; + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucModeType; + UCHAR ucReserved; +}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4; + +// ucEnable +#define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f +#define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10 + typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION { ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface; @@ -5027,7 +6103,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION typedef struct _MEMORY_CLEAN_UP_PARAMETERS { - USHORT usMemoryStart; //in 8Kb boundry, offset from memory base address + USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address USHORT usMemorySize; //8Kb blocks aligned }MEMORY_CLEAN_UP_PARAMETERS; #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS @@ -5038,6 +6114,58 @@ typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS USHORT usY_Size; }GET_DISPLAY_SURFACE_SIZE_PARAMETERS; +typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2 +{ + union{ + USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC + USHORT usSurface; + }; + USHORT usY_Size; + USHORT usDispXStart; + USHORT usDispYStart; +}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; + + +typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 +{ + UCHAR ucLutId; + UCHAR ucAction; + USHORT usLutStartIndex; + USHORT usLutLength; + USHORT usLutOffsetInVram; +}PALETTE_DATA_CONTROL_PARAMETERS_V3; + +// ucAction: +#define PALETTE_DATA_AUTO_FILL 1 +#define PALETTE_DATA_READ 2 +#define PALETTE_DATA_WRITE 3 + + +typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2 +{ + UCHAR ucInterruptId; + UCHAR ucServiceId; + UCHAR ucStatus; + UCHAR ucReserved; +}INTERRUPT_SERVICE_PARAMETER_V2; + +// ucInterruptId +#define HDP1_INTERRUPT_ID 1 +#define HDP2_INTERRUPT_ID 2 +#define HDP3_INTERRUPT_ID 3 +#define HDP4_INTERRUPT_ID 4 +#define HDP5_INTERRUPT_ID 5 +#define HDP6_INTERRUPT_ID 6 +#define SW_INTERRUPT_ID 11 + +// ucAction +#define INTERRUPT_SERVICE_GEN_SW_INT 1 +#define INTERRUPT_SERVICE_GET_STATUS 2 + + // ucStatus +#define INTERRUPT_STATUS__INT_TRIGGER 1 +#define INTERRUPT_STATUS__HPD_HIGH 2 + typedef struct _INDIRECT_IO_ACCESS { ATOM_COMMON_TABLE_HEADER sHeader; @@ -5053,6 +6181,7 @@ typedef struct _INDIRECT_IO_ACCESS #define INDIRECT_IO_PCIE 3 #define INDIRECT_IO_PCIEP 4 #define INDIRECT_IO_NBMISC 5 +#define INDIRECT_IO_SMU 5 #define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ #define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE @@ -5064,6 +6193,8 @@ typedef struct _INDIRECT_IO_ACCESS #define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE #define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ #define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE +#define INDIRECT_IO_SMU_READ INDIRECT_IO_SMU | INDIRECT_READ +#define INDIRECT_IO_SMU_WRITE INDIRECT_IO_SMU | INDIRECT_WRITE typedef struct _ATOM_OEM_INFO { @@ -5170,7 +6301,7 @@ typedef struct _ATOM_INIT_REG_BLOCK{ #define END_OF_REG_INDEX_BLOCK 0x0ffff #define END_OF_REG_DATA_BLOCK 0x00000000 -#define ATOM_INIT_REG_MASK_FLAG 0x80 +#define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS #define CLOCK_RANGE_HIGHEST 0x00ffffff #define VALUE_DWORD SIZEOF ULONG @@ -5209,7 +6340,10 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define _64Mx32 0x43 #define _128Mx8 0x51 #define _128Mx16 0x52 +#define _128Mx32 0x53 #define _256Mx8 0x61 +#define _256Mx16 0x62 +#define _512Mx8 0x71 #define SAMSUNG 0x1 #define INFINEON 0x2 @@ -5226,6 +6360,8 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define PROMOS MOSEL #define KRETON INFINEON #define ELIXIR NANYA +#define MEZZA ELPIDA + /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// @@ -5566,7 +6702,7 @@ typedef struct _ATOM_VRAM_MODULE_V7 ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7 USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) - USHORT usReserved; + USHORT usEnableChannels; // bit vector which indicate which channels are enabled UCHAR ucExtMemoryID; // Current memory module ID UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5 UCHAR ucChannelNum; // Number of mem. channels supported in this module @@ -5578,7 +6714,8 @@ typedef struct _ATOM_VRAM_MODULE_V7 UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2. UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros - UCHAR ucReserved[3]; + USHORT usSEQSettingOffset; + UCHAR ucReserved; // Memory Module specific values USHORT usEMRS2Value; // EMRS2/MR2 Value. USHORT usEMRS3Value; // EMRS3/MR3 Value. @@ -5614,10 +6751,10 @@ typedef struct _ATOM_VRAM_INFO_V3 typedef struct _ATOM_VRAM_INFO_V4 { ATOM_COMMON_TABLE_HEADER sHeader; - USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting - USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting - USHORT usRerseved; - UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usRerseved; + UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] UCHAR ucReservde[4]; UCHAR ucNumOfVRAMModule; @@ -5629,9 +6766,10 @@ typedef struct _ATOM_VRAM_INFO_V4 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1 { ATOM_COMMON_TABLE_HEADER sHeader; - USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting - USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting - USHORT usReserved[4]; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings + USHORT usReserved[3]; UCHAR ucNumOfVRAMModule; // indicate number of VRAM module UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version @@ -5916,6 +7054,57 @@ typedef struct _ATOM_DISP_OUT_INFO_V2 ASIC_ENCODER_INFO asEncoderInfo[1]; }ATOM_DISP_OUT_INFO_V2; + +typedef struct _ATOM_DISP_CLOCK_ID { + UCHAR ucPpllId; + UCHAR ucPpllAttribute; +}ATOM_DISP_CLOCK_ID; + +// ucPpllAttribute +#define CLOCK_SOURCE_SHAREABLE 0x01 +#define CLOCK_SOURCE_DP_MODE 0x02 +#define CLOCK_SOURCE_NONE_DP_MODE 0x04 + +//DispOutInfoTable +typedef struct _ASIC_TRANSMITTER_INFO_V2 +{ + USHORT usTransmitterObjId; + USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object + UCHAR ucTransmitterCmdTblId; + UCHAR ucConfig; + UCHAR ucEncoderID; // available 1st encoder ( default ) + UCHAR ucOptionEncoderID; // available 2nd encoder ( optional ) + UCHAR uc2ndEncoderID; + UCHAR ucReserved; +}ASIC_TRANSMITTER_INFO_V2; + +typedef struct _ATOM_DISP_OUT_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. + USHORT usReserved; + UCHAR ucDCERevision; + UCHAR ucMaxDispEngineNum; + UCHAR ucMaxActiveDispEngineNum; + UCHAR ucMaxPPLLNum; + UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE + UCHAR ucDispCaps; + UCHAR ucReserved[2]; + ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only +}ATOM_DISP_OUT_INFO_V3; + +//ucDispCaps +#define DISPLAY_CAPS__DP_PCLK_FROM_PPLL 0x01 +#define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED 0x02 + +typedef enum CORE_REF_CLK_SOURCE{ + CLOCK_SRC_XTALIN=0, + CLOCK_SRC_XO_IN=1, + CLOCK_SRC_XO_IN2=2, +}CORE_REF_CLK_SOURCE; + // DispDevicePriorityInfo typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO { @@ -6051,6 +7240,39 @@ typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS #define HW_I2C_READ 0 #define I2C_2BYTE_ADDR 0x02 +/****************************************************************************/ +// Structures used by HW_Misc_OperationTable +/****************************************************************************/ +typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 +{ + UCHAR ucCmd; // Input: To tell which action to take + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; + +typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 +{ + UCHAR ucReturnCode; // Output: Return value base on action was taken + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1; + +// Actions code +#define ATOM_GET_SDI_SUPPORT 0xF0 + +// Return code +#define ATOM_UNKNOWN_CMD 0 +#define ATOM_FEATURE_NOT_SUPPORTED 1 +#define ATOM_FEATURE_SUPPORTED 2 + +typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION +{ + ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output; + PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved; +}ATOM_HW_MISC_OPERATION_PS_ALLOCATION; + +/****************************************************************************/ + typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 { UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ... @@ -6071,6 +7293,94 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 #define SELECT_CRTC_PIXEL_RATE 7 #define SELECT_VGA_BLK 8 +// DIGTransmitterInfoTable structure used to program UNIPHY settings +typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock + USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info + USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range + USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info + USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings +}DIG_TRANSMITTER_INFO_HEADER_V3_1; + +typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock + USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info + USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range + USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info + USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings + USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info + USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings +}DIG_TRANSMITTER_INFO_HEADER_V3_2; + +typedef struct _CLOCK_CONDITION_REGESTER_INFO{ + USHORT usRegisterIndex; + UCHAR ucStartBit; + UCHAR ucEndBit; +}CLOCK_CONDITION_REGESTER_INFO; + +typedef struct _CLOCK_CONDITION_SETTING_ENTRY{ + USHORT usMaxClockFreq; + UCHAR ucEncodeMode; + UCHAR ucPhySel; + ULONG ulAnalogSetting[1]; +}CLOCK_CONDITION_SETTING_ENTRY; + +typedef struct _CLOCK_CONDITION_SETTING_INFO{ + USHORT usEntrySize; + CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1]; +}CLOCK_CONDITION_SETTING_INFO; + +typedef struct _PHY_CONDITION_REG_VAL{ + ULONG ulCondition; + ULONG ulRegVal; +}PHY_CONDITION_REG_VAL; + +typedef struct _PHY_CONDITION_REG_VAL_V2{ + ULONG ulCondition; + UCHAR ucCondition2; + ULONG ulRegVal; +}PHY_CONDITION_REG_VAL_V2; + +typedef struct _PHY_CONDITION_REG_INFO{ + USHORT usRegIndex; + USHORT usSize; + PHY_CONDITION_REG_VAL asRegVal[1]; +}PHY_CONDITION_REG_INFO; + +typedef struct _PHY_CONDITION_REG_INFO_V2{ + USHORT usRegIndex; + USHORT usSize; + PHY_CONDITION_REG_VAL_V2 asRegVal[1]; +}PHY_CONDITION_REG_INFO_V2; + +typedef struct _PHY_ANALOG_SETTING_INFO{ + UCHAR ucEncodeMode; + UCHAR ucPhySel; + USHORT usSize; + PHY_CONDITION_REG_INFO asAnalogSetting[1]; +}PHY_ANALOG_SETTING_INFO; + +typedef struct _PHY_ANALOG_SETTING_INFO_V2{ + UCHAR ucEncodeMode; + UCHAR ucPhySel; + USHORT usSize; + PHY_CONDITION_REG_INFO_V2 asAnalogSetting[1]; +}PHY_ANALOG_SETTING_INFO_V2; + +typedef struct _GFX_HAVESTING_PARAMETERS { + UCHAR ucGfxBlkId; //GFX blk id to be harvested, like CU, RB or PRIM + UCHAR ucReserved; //reserved + UCHAR ucActiveUnitNumPerSH; //requested active CU/RB/PRIM number per shader array + UCHAR ucMaxUnitNumPerSH; //max CU/RB/PRIM number per shader array +} GFX_HAVESTING_PARAMETERS; + +//ucGfxBlkId +#define GFX_HARVESTING_CU_ID 0 +#define GFX_HARVESTING_RB_ID 1 +#define GFX_HARVESTING_PRIM_ID 2 + /****************************************************************************/ //Portion VI: Definitinos for vbios MC scratch registers that driver used /****************************************************************************/ @@ -6081,8 +7391,17 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 #define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000 #define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000 #define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000 +#define MC_MISC0__MEMORY_TYPE__HBM 0x60000000 #define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000 +#define ATOM_MEM_TYPE_DDR_STRING "DDR" +#define ATOM_MEM_TYPE_DDR2_STRING "DDR2" +#define ATOM_MEM_TYPE_GDDR3_STRING "GDDR3" +#define ATOM_MEM_TYPE_GDDR4_STRING "GDDR4" +#define ATOM_MEM_TYPE_GDDR5_STRING "GDDR5" +#define ATOM_MEM_TYPE_HBM_STRING "HBM" +#define ATOM_MEM_TYPE_DDR3_STRING "DDR3" + /****************************************************************************/ //Portion VI: Definitinos being oboselete /****************************************************************************/ @@ -6445,417 +7764,8 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; }ATOM_POWERPLAY_INFO_V3; -/* New PPlib */ -/**************************************************************************/ -typedef struct _ATOM_PPLIB_THERMALCONTROLLER - -{ - UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* - UCHAR ucI2cLine; // as interpreted by DAL I2C - UCHAR ucI2cAddress; - UCHAR ucFanParameters; // Fan Control Parameters. - UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. - UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. - UCHAR ucReserved; // ---- - UCHAR ucFlags; // to be defined -} ATOM_PPLIB_THERMALCONTROLLER; - -#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f -#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. - -#define ATOM_PP_THERMALCONTROLLER_NONE 0 -#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_LM64 5 -#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 -#define ATOM_PP_THERMALCONTROLLER_RV770 8 -#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 -#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11 -#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12 -#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen. -#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally -#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15 - -// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal. -// We probably should reserve the bit 0x80 for this use. -// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here). -// The driver can pick the correct internal controller based on the ASIC. - -#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller -#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller - -typedef struct _ATOM_PPLIB_STATE -{ - UCHAR ucNonClockStateIndex; - UCHAR ucClockStateIndices[1]; // variable-sized -} ATOM_PPLIB_STATE; - -typedef struct _ATOM_PPLIB_FANTABLE -{ - UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same. - UCHAR ucTHyst; // Temperature hysteresis. Integer. - USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM. - USHORT usTMed; // The middle temperature where we change slopes. - USHORT usTHigh; // The high point above TMed for adjusting the second slope. - USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments). - USHORT usPWMMed; // The PWM value (in percent) at TMed. - USHORT usPWMHigh; // The PWM value at THigh. -} ATOM_PPLIB_FANTABLE; - -typedef struct _ATOM_PPLIB_EXTENDEDHEADER -{ - USHORT usSize; - ULONG ulMaxEngineClock; // For Overdrive. - ULONG ulMaxMemoryClock; // For Overdrive. - // Add extra system parameters here, always adjust size to include all fields. -} ATOM_PPLIB_EXTENDEDHEADER; - -//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps -#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 -#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 -#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 -#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 -#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 -#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 -#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 -#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 -#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 -#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 -#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 -#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 -#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096 -#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition. -#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition). -#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC. -#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature. -#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state. - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE -{ - ATOM_COMMON_TABLE_HEADER sHeader; - - UCHAR ucDataRevision; - - UCHAR ucNumStates; - UCHAR ucStateEntrySize; - UCHAR ucClockInfoSize; - UCHAR ucNonClockSize; - - // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures - USHORT usStateArrayOffset; - - // offset from start of this table to array of ASIC-specific structures, - // currently ATOM_PPLIB_CLOCK_INFO. - USHORT usClockInfoArrayOffset; - - // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO - USHORT usNonClockInfoArrayOffset; - - USHORT usBackbiasTime; // in microseconds - USHORT usVoltageTime; // in microseconds - USHORT usTableSize; //the size of this structure, or the extended structure - - ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* - - ATOM_PPLIB_THERMALCONTROLLER sThermalController; - - USHORT usBootClockInfoOffset; - USHORT usBootNonClockInfoOffset; - -} ATOM_PPLIB_POWERPLAYTABLE; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE2 -{ - ATOM_PPLIB_POWERPLAYTABLE basicTable; - UCHAR ucNumCustomThermalPolicy; - USHORT usCustomThermalPolicyArrayOffset; -}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 -{ - ATOM_PPLIB_POWERPLAYTABLE2 basicTable2; - USHORT usFormatID; // To be used ONLY by PPGen. - USHORT usFanTableOffset; - USHORT usExtendendedHeaderOffset; -} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 -{ - ATOM_PPLIB_POWERPLAYTABLE3 basicTable3; - ULONG ulGoldenPPID; // PPGen use only - ULONG ulGoldenRevision; // PPGen use only - USHORT usVddcDependencyOnSCLKOffset; - USHORT usVddciDependencyOnMCLKOffset; - USHORT usVddcDependencyOnMCLKOffset; - USHORT usMaxClockVoltageOnDCOffset; - USHORT usReserved[2]; -} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 -{ - ATOM_PPLIB_POWERPLAYTABLE4 basicTable4; - ULONG ulTDPLimit; - ULONG ulNearTDPLimit; - ULONG ulSQRampingThreshold; - USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table - ULONG ulCACLeakage; // TBD, this parameter is still under discussion. Change to ulReserved if not needed. - ULONG ulReserved; -} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5; - -//// ATOM_PPLIB_NONCLOCK_INFO::usClassification -#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 -#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 -#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 -#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 -#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 -#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 -// 2, 4, 6, 7 are reserved - -#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 -#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 -#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 -#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 -#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 -#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 -#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 -#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 -#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 -#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 -#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000 -#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000 -#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000 - -//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2 -#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001 -#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002 - -//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings -#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 -#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 - -// 0 is 2.5Gb/s, 1 is 5Gb/s -#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 -#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 - -// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec -#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 -#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 - -// lookup into reduced refresh-rate table -#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 -#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 - -#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 -#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 -// 2-15 TBD as needed. - -#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 -#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 -#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 -#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 - -//memory related flags -#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000 - -//M3 Arb //2bits, current 3 sets of parameters in total -#define ATOM_PPLIB_M3ARB_MASK 0x00060000 -#define ATOM_PPLIB_M3ARB_SHIFT 17 - -#define ATOM_PPLIB_ENABLE_DRR 0x00080000 - -// remaining 16 bits are reserved -typedef struct _ATOM_PPLIB_THERMAL_STATE -{ - UCHAR ucMinTemperature; - UCHAR ucMaxTemperature; - UCHAR ucThermalAction; -}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE; - -// Contained in an array starting at the offset -// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. -// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex -#define ATOM_PPLIB_NONCLOCKINFO_VER1 12 -#define ATOM_PPLIB_NONCLOCKINFO_VER2 24 -typedef struct _ATOM_PPLIB_NONCLOCK_INFO -{ - USHORT usClassification; - UCHAR ucMinTemperature; - UCHAR ucMaxTemperature; - ULONG ulCapsAndSettings; - UCHAR ucRequiredPower; - USHORT usClassification2; - ULONG ulVCLK; - ULONG ulDCLK; - UCHAR ucUnused[5]; -} ATOM_PPLIB_NONCLOCK_INFO; - -// Contained in an array starting at the offset -// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. -// referenced from ATOM_PPLIB_STATE::ucClockStateIndices -typedef struct _ATOM_PPLIB_R600_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - USHORT usVDDC; - USHORT usUnused1; - USHORT usUnused2; - - ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* - -} ATOM_PPLIB_R600_CLOCK_INFO; - -// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO -#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 -#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 -#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 -#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 -#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 -#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0). - -typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - USHORT usVDDC; - USHORT usVDDCI; - USHORT usUnused; - - ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* - -} ATOM_PPLIB_EVERGREEN_CLOCK_INFO; - -typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO - -{ - USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). - UCHAR ucLowEngineClockHigh; - USHORT usHighEngineClockLow; // High Engine clock in MHz. - UCHAR ucHighEngineClockHigh; - USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. - UCHAR ucMemoryClockHigh; // Currentyl unused. - UCHAR ucPadding; // For proper alignment and size. - USHORT usVDDC; // For the 780, use: None, Low, High, Variable - UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} - UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement. - USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). - ULONG ulFlags; -} ATOM_PPLIB_RS780_CLOCK_INFO; - -#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 -#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 -#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 -#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 - -#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. -#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 -#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 - -#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 -#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 -#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 - -typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ - USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz - UCHAR ucEngineClockHigh; //clockfrequency >> 16. - UCHAR vddcIndex; //2-bit vddc index; - UCHAR leakage; //please use 8-bit absolute value, not the 6-bit % value - //please initalize to 0 - UCHAR rsv; - //please initalize to 0 - USHORT rsv1; - //please initialize to 0s - ULONG rsv2[2]; -}ATOM_PPLIB_SUMO_CLOCK_INFO; - - - -typedef struct _ATOM_PPLIB_STATE_V2 -{ - //number of valid dpm levels in this state; Driver uses it to calculate the whole - //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR) - UCHAR ucNumDPMLevels; - - //a index to the array of nonClockInfos - UCHAR nonClockInfoIndex; - /** - * Driver will read the first ucNumDPMLevels in this array - */ - UCHAR clockInfoIndex[1]; -} ATOM_PPLIB_STATE_V2; - -typedef struct StateArray{ - //how many states we have - UCHAR ucNumEntries; - - ATOM_PPLIB_STATE_V2 states[1]; -}StateArray; - -typedef struct ClockInfoArray{ - //how many clock levels we have - UCHAR ucNumEntries; - - //sizeof(ATOM_PPLIB_SUMO_CLOCK_INFO) - UCHAR ucEntrySize; - - //this is for Sumo - ATOM_PPLIB_SUMO_CLOCK_INFO clockInfo[1]; -}ClockInfoArray; - -typedef struct NonClockInfoArray{ - - //how many non-clock levels we have. normally should be same as number of states - UCHAR ucNumEntries; - //sizeof(ATOM_PPLIB_NONCLOCK_INFO) - UCHAR ucEntrySize; - - ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1]; -}NonClockInfoArray; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record -{ - USHORT usClockLow; - UCHAR ucClockHigh; - USHORT usVoltage; -}ATOM_PPLIB_Clock_Voltage_Dependency_Record; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_Clock_Voltage_Dependency_Table; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record -{ - USHORT usSclkLow; - UCHAR ucSclkHigh; - USHORT usMclkLow; - UCHAR ucMclkHigh; - USHORT usVddc; - USHORT usVddci; -}ATOM_PPLIB_Clock_Voltage_Limit_Record; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_Clock_Voltage_Limit_Table; - -/**************************************************************************/ - - -// Following definitions are for compatiblity issue in different SW components. +// Following definitions are for compatibility issue in different SW components. #define ATOM_MASTER_DATA_TABLE_REVISION 0x01 #define Object_Info Object_Header #define AdjustARB_SEQ MC_InitParameter @@ -7001,4 +7911,71 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table #pragma pack() // BIOS data must use byte aligment +// +// AMD ACPI Table +// +#pragma pack(1) + +typedef struct { + ULONG Signature; + ULONG TableLength; //Length + UCHAR Revision; + UCHAR Checksum; + UCHAR OemId[6]; + UCHAR OemTableId[8]; //UINT64 OemTableId; + ULONG OemRevision; + ULONG CreatorId; + ULONG CreatorRevision; +} AMD_ACPI_DESCRIPTION_HEADER; +/* +//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h +typedef struct { + UINT32 Signature; //0x0 + UINT32 Length; //0x4 + UINT8 Revision; //0x8 + UINT8 Checksum; //0x9 + UINT8 OemId[6]; //0xA + UINT64 OemTableId; //0x10 + UINT32 OemRevision; //0x18 + UINT32 CreatorId; //0x1C + UINT32 CreatorRevision; //0x20 +}EFI_ACPI_DESCRIPTION_HEADER; +*/ +typedef struct { + AMD_ACPI_DESCRIPTION_HEADER SHeader; + UCHAR TableUUID[16]; //0x24 + ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture. + ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture. + ULONG Reserved[4]; //0x3C +}UEFI_ACPI_VFCT; + +typedef struct { + ULONG PCIBus; //0x4C + ULONG PCIDevice; //0x50 + ULONG PCIFunction; //0x54 + USHORT VendorID; //0x58 + USHORT DeviceID; //0x5A + USHORT SSVID; //0x5C + USHORT SSID; //0x5E + ULONG Revision; //0x60 + ULONG ImageLength; //0x64 +}VFCT_IMAGE_HEADER; + + +typedef struct { + VFCT_IMAGE_HEADER VbiosHeader; + UCHAR VbiosContent[1]; +}GOP_VBIOS_CONTENT; + +typedef struct { + VFCT_IMAGE_HEADER Lib1Header; + UCHAR Lib1Content[1]; +}GOP_LIB1_CONTENT; + +#pragma pack() + + #endif /* _ATOMBIOS_H */ + +#include "pptable.h" + |