diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_pm.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 95 |
1 files changed, 83 insertions, 12 deletions
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 906d06f73e5..d1e53abec1b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5388,8 +5388,11 @@ static void valleyview_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); - /* WaDisableL3Bank2xClockGate:vlv */ - I915_WRITE(GEN7_UCGCTL4, GEN7_L3BANK2X_CLOCK_GATE_DISABLE); + /* WaDisableL3Bank2xClockGate:vlv + * Disabling L3 clock gating- MMIO 940c[25] = 1 + * Set bit 25, to disable L3_BANK_2x_CLK_GATING */ + I915_WRITE(GEN7_UCGCTL4, + I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE); I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); @@ -5541,6 +5544,12 @@ static void gen3_init_clock_gating(struct drm_device *dev) /* IIR "flip pending" means done if this bit is set */ I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); + + /* interrupts should cause a wake up from C3 */ + I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN)); + + /* On GEN3 we really need to make sure the ARB C3 LP bit is set */ + I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE)); } static void i85x_init_clock_gating(struct drm_device *dev) @@ -5548,6 +5557,10 @@ static void i85x_init_clock_gating(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); + + /* interrupts should cause a wake up from C3 */ + I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) | + _MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE)); } static void i830_init_clock_gating(struct drm_device *dev) @@ -5599,10 +5612,25 @@ bool intel_display_power_enabled_sw(struct drm_i915_private *dev_priv, enum intel_display_power_domain domain) { struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + bool is_enabled; + int i; + + if (dev_priv->pm.suspended) + return false; power_domains = &dev_priv->power_domains; + is_enabled = true; + for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { + if (power_well->always_on) + continue; - return power_domains->domain_use_count[domain]; + if (!power_well->count) { + is_enabled = false; + break; + } + } + return is_enabled; } bool intel_display_power_enabled(struct drm_i915_private *dev_priv, @@ -5745,13 +5773,34 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, return true; } -static void vlv_set_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, bool enable) +void __vlv_set_power_well(struct drm_i915_private *dev_priv, + enum punit_power_well power_well_id, bool enable) { - enum punit_power_well power_well_id = power_well->data; + struct drm_device *dev = dev_priv->dev; u32 mask; u32 state; u32 ctrl; + enum pipe pipe; + + if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) { + if (enable) { + /* + * Enable the CRI clock source so we can get at the + * display and the reference clock for VGA + * hotplug / manual detection. + */ + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | + DPLL_INTEGRATED_CRI_CLK_VLV); + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ + } else { + for_each_pipe(pipe) + assert_pll_disabled(dev_priv, pipe); + /* Assert common reset */ + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & + ~DPIO_CMNRST); + } + } mask = PUNIT_PWRGT_MASK(power_well_id); state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : @@ -5779,6 +5828,28 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, out: mutex_unlock(&dev_priv->rps.hw_lock); + + /* + * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - + * 6. De-assert cmn_reset/side_reset. Same as VLV X0. + * a. GUnit 0x2110 bit[0] set to 1 (def 0) + * b. The other bits such as sfr settings / modesel may all + * be set to 0. + * + * This should only be done on init and resume from S3 with + * both PLLs disabled, or we risk losing DPIO and PLL + * synchronization. + */ + if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable) + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); +} + +static void vlv_set_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, bool enable) +{ + enum punit_power_well power_well_id = power_well->data; + + __vlv_set_power_well(dev_priv, power_well_id, enable); } static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, @@ -6114,12 +6185,6 @@ static struct i915_power_well vlv_power_wells[] = { .ops = &vlv_display_power_well_ops, }, { - .name = "dpio-common", - .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DPIO_CMN_BC, - .ops = &vlv_dpio_power_well_ops, - }, - { .name = "dpio-tx-b-01", .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | @@ -6155,6 +6220,12 @@ static struct i915_power_well vlv_power_wells[] = { .ops = &vlv_dpio_power_well_ops, .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, }, + { + .name = "dpio-common", + .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DPIO_CMN_BC, + .ops = &vlv_dpio_power_well_ops, + }, }; #define set_power_wells(power_domains, __power_wells) ({ \ |