diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_pm.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 6612 |
1 files changed, 6612 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c new file mode 100644 index 00000000000..ee72807069e --- /dev/null +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -0,0 +1,6612 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eugeni Dodonov <eugeni.dodonov@intel.com> + * + */ + +#include <linux/cpufreq.h> +#include "i915_drv.h" +#include "intel_drv.h" +#include "../../../platform/x86/intel_ips.h" +#include <linux/module.h> +#include <linux/vgaarb.h> +#include <drm/i915_powerwell.h> +#include <linux/pm_runtime.h> + +/** + * RC6 is a special power stage which allows the GPU to enter an very + * low-voltage mode when idle, using down to 0V while at this stage. This + * stage is entered automatically when the GPU is idle when RC6 support is + * enabled, and as soon as new workload arises GPU wakes up automatically as well. + * + * There are different RC6 modes available in Intel GPU, which differentiate + * among each other with the latency required to enter and leave RC6 and + * voltage consumed by the GPU in different states. + * + * The combination of the following flags define which states GPU is allowed + * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and + * RC6pp is deepest RC6. Their support by hardware varies according to the + * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one + * which brings the most power savings; deeper states save more power, but + * require higher latency to switch to and wake up. + */ +#define INTEL_RC6_ENABLE (1<<0) +#define INTEL_RC6p_ENABLE (1<<1) +#define INTEL_RC6pp_ENABLE (1<<2) + +/* FBC, or Frame Buffer Compression, is a technique employed to compress the + * framebuffer contents in-memory, aiming at reducing the required bandwidth + * during in-memory transfers and, therefore, reduce the power packet. + * + * The benefits of FBC are mostly visible with solid backgrounds and + * variation-less patterns. + * + * FBC-related functionality can be enabled by the means of the + * i915.i915_enable_fbc parameter + */ + +static void i8xx_disable_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 fbc_ctl; + + /* Disable compression */ + fbc_ctl = I915_READ(FBC_CONTROL); + if ((fbc_ctl & FBC_CTL_EN) == 0) + return; + + fbc_ctl &= ~FBC_CTL_EN; + I915_WRITE(FBC_CONTROL, fbc_ctl); + + /* Wait for compressing bit to clear */ + if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { + DRM_DEBUG_KMS("FBC idle timed out\n"); + return; + } + + DRM_DEBUG_KMS("disabled FBC\n"); +} + +static void i8xx_enable_fbc(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_framebuffer *fb = crtc->primary->fb; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int cfb_pitch; + int i; + u32 fbc_ctl; + + cfb_pitch = dev_priv->fbc.size / FBC_LL_SIZE; + if (fb->pitches[0] < cfb_pitch) + cfb_pitch = fb->pitches[0]; + + /* FBC_CTL wants 32B or 64B units */ + if (IS_GEN2(dev)) + cfb_pitch = (cfb_pitch / 32) - 1; + else + cfb_pitch = (cfb_pitch / 64) - 1; + + /* Clear old tags */ + for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++) + I915_WRITE(FBC_TAG + (i * 4), 0); + + if (IS_GEN4(dev)) { + u32 fbc_ctl2; + + /* Set it up... */ + fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE; + fbc_ctl2 |= FBC_CTL_PLANE(intel_crtc->plane); + I915_WRITE(FBC_CONTROL2, fbc_ctl2); + I915_WRITE(FBC_FENCE_OFF, crtc->y); + } + + /* enable it... */ + fbc_ctl = I915_READ(FBC_CONTROL); + fbc_ctl &= 0x3fff << FBC_CTL_INTERVAL_SHIFT; + fbc_ctl |= FBC_CTL_EN | FBC_CTL_PERIODIC; + if (IS_I945GM(dev)) + fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */ + fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; + fbc_ctl |= obj->fence_reg; + I915_WRITE(FBC_CONTROL, fbc_ctl); + + DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %c\n", + cfb_pitch, crtc->y, plane_name(intel_crtc->plane)); +} + +static bool i8xx_fbc_enabled(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return I915_READ(FBC_CONTROL) & FBC_CTL_EN; +} + +static void g4x_enable_fbc(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_framebuffer *fb = crtc->primary->fb; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + u32 dpfc_ctl; + + dpfc_ctl = DPFC_CTL_PLANE(intel_crtc->plane) | DPFC_SR_EN; + if (drm_format_plane_cpp(fb->pixel_format, 0) == 2) + dpfc_ctl |= DPFC_CTL_LIMIT_2X; + else + dpfc_ctl |= DPFC_CTL_LIMIT_1X; + dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg; + + I915_WRITE(DPFC_FENCE_YOFF, crtc->y); + + /* enable it... */ + I915_WRITE(DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); + + DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane)); +} + +static void g4x_disable_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpfc_ctl; + + /* Disable compression */ + dpfc_ctl = I915_READ(DPFC_CONTROL); + if (dpfc_ctl & DPFC_CTL_EN) { + dpfc_ctl &= ~DPFC_CTL_EN; + I915_WRITE(DPFC_CONTROL, dpfc_ctl); + + DRM_DEBUG_KMS("disabled FBC\n"); + } +} + +static bool g4x_fbc_enabled(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN; +} + +static void sandybridge_blit_fbc_update(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 blt_ecoskpd; + + /* Make sure blitter notifies FBC of writes */ + + /* Blitter is part of Media powerwell on VLV. No impact of + * his param in other platforms for now */ + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_MEDIA); + + blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD); + blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY << + GEN6_BLITTER_LOCK_SHIFT; + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY; + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY << + GEN6_BLITTER_LOCK_SHIFT); + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + POSTING_READ(GEN6_BLITTER_ECOSKPD); + + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_MEDIA); +} + +static void ironlake_enable_fbc(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_framebuffer *fb = crtc->primary->fb; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + u32 dpfc_ctl; + + dpfc_ctl = DPFC_CTL_PLANE(intel_crtc->plane); + if (drm_format_plane_cpp(fb->pixel_format, 0) == 2) + dpfc_ctl |= DPFC_CTL_LIMIT_2X; + else + dpfc_ctl |= DPFC_CTL_LIMIT_1X; + dpfc_ctl |= DPFC_CTL_FENCE_EN; + if (IS_GEN5(dev)) + dpfc_ctl |= obj->fence_reg; + + I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y); + I915_WRITE(ILK_FBC_RT_BASE, i915_gem_obj_ggtt_offset(obj) | ILK_FBC_RT_VALID); + /* enable it... */ + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); + + if (IS_GEN6(dev)) { + I915_WRITE(SNB_DPFC_CTL_SA, + SNB_CPU_FENCE_ENABLE | obj->fence_reg); + I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y); + sandybridge_blit_fbc_update(dev); + } + + DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane)); +} + +static void ironlake_disable_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpfc_ctl; + + /* Disable compression */ + dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); + if (dpfc_ctl & DPFC_CTL_EN) { + dpfc_ctl &= ~DPFC_CTL_EN; + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); + + DRM_DEBUG_KMS("disabled FBC\n"); + } +} + +static bool ironlake_fbc_enabled(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN; +} + +static void gen7_enable_fbc(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_framebuffer *fb = crtc->primary->fb; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + u32 dpfc_ctl; + + dpfc_ctl = IVB_DPFC_CTL_PLANE(intel_crtc->plane); + if (drm_format_plane_cpp(fb->pixel_format, 0) == 2) + dpfc_ctl |= DPFC_CTL_LIMIT_2X; + else + dpfc_ctl |= DPFC_CTL_LIMIT_1X; + dpfc_ctl |= IVB_DPFC_CTL_FENCE_EN; + + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); + + if (IS_IVYBRIDGE(dev)) { + /* WaFbcAsynchFlipDisableFbcQueue:ivb */ + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS); + } else { + /* WaFbcAsynchFlipDisableFbcQueue:hsw,bdw */ + I915_WRITE(CHICKEN_PIPESL_1(intel_crtc->pipe), + I915_READ(CHICKEN_PIPESL_1(intel_crtc->pipe)) | + HSW_FBCQ_DIS); + } + + I915_WRITE(SNB_DPFC_CTL_SA, + SNB_CPU_FENCE_ENABLE | obj->fence_reg); + I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y); + + sandybridge_blit_fbc_update(dev); + + DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane)); +} + +bool intel_fbc_enabled(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!dev_priv->display.fbc_enabled) + return false; + + return dev_priv->display.fbc_enabled(dev); +} + +static void intel_fbc_work_fn(struct work_struct *__work) +{ + struct intel_fbc_work *work = + container_of(to_delayed_work(__work), + struct intel_fbc_work, work); + struct drm_device *dev = work->crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_lock(&dev->struct_mutex); + if (work == dev_priv->fbc.fbc_work) { + /* Double check that we haven't switched fb without cancelling + * the prior work. + */ + if (work->crtc->primary->fb == work->fb) { + dev_priv->display.enable_fbc(work->crtc); + + dev_priv->fbc.plane = to_intel_crtc(work->crtc)->plane; + dev_priv->fbc.fb_id = work->crtc->primary->fb->base.id; + dev_priv->fbc.y = work->crtc->y; + } + + dev_priv->fbc.fbc_work = NULL; + } + mutex_unlock(&dev->struct_mutex); + + kfree(work); +} + +static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv) +{ + if (dev_priv->fbc.fbc_work == NULL) + return; + + DRM_DEBUG_KMS("cancelling pending FBC enable\n"); + + /* Synchronisation is provided by struct_mutex and checking of + * dev_priv->fbc.fbc_work, so we can perform the cancellation + * entirely asynchronously. + */ + if (cancel_delayed_work(&dev_priv->fbc.fbc_work->work)) + /* tasklet was killed before being run, clean up */ + kfree(dev_priv->fbc.fbc_work); + + /* Mark the work as no longer wanted so that if it does + * wake-up (because the work was already running and waiting + * for our mutex), it will discover that is no longer + * necessary to run. + */ + dev_priv->fbc.fbc_work = NULL; +} + +static void intel_enable_fbc(struct drm_crtc *crtc) +{ + struct intel_fbc_work *work; + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!dev_priv->display.enable_fbc) + return; + + intel_cancel_fbc_work(dev_priv); + + work = kzalloc(sizeof(*work), GFP_KERNEL); + if (work == NULL) { + DRM_ERROR("Failed to allocate FBC work structure\n"); + dev_priv->display.enable_fbc(crtc); + return; + } + + work->crtc = crtc; + work->fb = crtc->primary->fb; + INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn); + + dev_priv->fbc.fbc_work = work; + + /* Delay the actual enabling to let pageflipping cease and the + * display to settle before starting the compression. Note that + * this delay also serves a second purpose: it allows for a + * vblank to pass after disabling the FBC before we attempt + * to modify the control registers. + * + * A more complicated solution would involve tracking vblanks + * following the termination of the page-flipping sequence + * and indeed performing the enable as a co-routine and not + * waiting synchronously upon the vblank. + * + * WaFbcWaitForVBlankBeforeEnable:ilk,snb + */ + schedule_delayed_work(&work->work, msecs_to_jiffies(50)); +} + +void intel_disable_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + intel_cancel_fbc_work(dev_priv); + + if (!dev_priv->display.disable_fbc) + return; + + dev_priv->display.disable_fbc(dev); + dev_priv->fbc.plane = -1; +} + +static bool set_no_fbc_reason(struct drm_i915_private *dev_priv, + enum no_fbc_reason reason) +{ + if (dev_priv->fbc.no_fbc_reason == reason) + return false; + + dev_priv->fbc.no_fbc_reason = reason; + return true; +} + +/** + * intel_update_fbc - enable/disable FBC as needed + * @dev: the drm_device + * + * Set up the framebuffer compression hardware at mode set time. We + * enable it if possible: + * - plane A only (on pre-965) + * - no pixel mulitply/line duplication + * - no alpha buffer discard + * - no dual wide + * - framebuffer <= max_hdisplay in width, max_vdisplay in height + * + * We can't assume that any compression will take place (worst case), + * so the compressed buffer has to be the same size as the uncompressed + * one. It also must reside (along with the line length buffer) in + * stolen memory. + * + * We need to enable/disable FBC on a global basis. + */ +void intel_update_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = NULL, *tmp_crtc; + struct intel_crtc *intel_crtc; + struct drm_framebuffer *fb; + struct intel_framebuffer *intel_fb; + struct drm_i915_gem_object *obj; + const struct drm_display_mode *adjusted_mode; + unsigned int max_width, max_height; + + if (!HAS_FBC(dev)) { + set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED); + return; + } + + if (!i915.powersave) { + if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM)) + DRM_DEBUG_KMS("fbc disabled per module param\n"); + return; + } + + /* + * If FBC is already on, we just have to verify that we can + * keep it that way... + * Need to disable if: + * - more than one pipe is active + * - changing FBC params (stride, fence, mode) + * - new fb is too large to fit in compressed buffer + * - going to an unsupported config (interlace, pixel multiply, etc.) + */ + for_each_crtc(dev, tmp_crtc) { + if (intel_crtc_active(tmp_crtc) && + to_intel_crtc(tmp_crtc)->primary_enabled) { + if (crtc) { + if (set_no_fbc_reason(dev_priv, FBC_MULTIPLE_PIPES)) + DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); + goto out_disable; + } + crtc = tmp_crtc; + } + } + + if (!crtc || crtc->primary->fb == NULL) { + if (set_no_fbc_reason(dev_priv, FBC_NO_OUTPUT)) + DRM_DEBUG_KMS("no output, disabling\n"); + goto out_disable; + } + + intel_crtc = to_intel_crtc(crtc); + fb = crtc->primary->fb; + intel_fb = to_intel_framebuffer(fb); + obj = intel_fb->obj; + adjusted_mode = &intel_crtc->config.adjusted_mode; + + if (i915.enable_fbc < 0) { + if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT)) + DRM_DEBUG_KMS("disabled per chip default\n"); + goto out_disable; + } + if (!i915.enable_fbc) { + if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM)) + DRM_DEBUG_KMS("fbc disabled per module param\n"); + goto out_disable; + } + if ((adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) || + (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)) { + if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE)) + DRM_DEBUG_KMS("mode incompatible with compression, " + "disabling\n"); + goto out_disable; + } + + if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { + max_width = 4096; + max_height = 2048; + } else { + max_width = 2048; + max_height = 1536; + } + if (intel_crtc->config.pipe_src_w > max_width || + intel_crtc->config.pipe_src_h > max_height) { + if (set_no_fbc_reason(dev_priv, FBC_MODE_TOO_LARGE)) + DRM_DEBUG_KMS("mode too large for compression, disabling\n"); + goto out_disable; + } + if ((INTEL_INFO(dev)->gen < 4 || HAS_DDI(dev)) && + intel_crtc->plane != PLANE_A) { + if (set_no_fbc_reason(dev_priv, FBC_BAD_PLANE)) + DRM_DEBUG_KMS("plane not A, disabling compression\n"); + goto out_disable; + } + + /* The use of a CPU fence is mandatory in order to detect writes + * by the CPU to the scanout and trigger updates to the FBC. + */ + if (obj->tiling_mode != I915_TILING_X || + obj->fence_reg == I915_FENCE_REG_NONE) { + if (set_no_fbc_reason(dev_priv, FBC_NOT_TILED)) + DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n"); + goto out_disable; + } + + /* If the kernel debugger is active, always disable compression */ + if (in_dbg_master()) + goto out_disable; + + if (i915_gem_stolen_setup_compression(dev, intel_fb->obj->base.size)) { + if (set_no_fbc_reason(dev_priv, FBC_STOLEN_TOO_SMALL)) + DRM_DEBUG_KMS("framebuffer too large, disabling compression\n"); + goto out_disable; + } + + /* If the scanout has not changed, don't modify the FBC settings. + * Note that we make the fundamental assumption that the fb->obj + * cannot be unpinned (and have its GTT offset and fence revoked) + * without first being decoupled from the scanout and FBC disabled. + */ + if (dev_priv->fbc.plane == intel_crtc->plane && + dev_priv->fbc.fb_id == fb->base.id && + dev_priv->fbc.y == crtc->y) + return; + + if (intel_fbc_enabled(dev)) { + /* We update FBC along two paths, after changing fb/crtc + * configuration (modeswitching) and after page-flipping + * finishes. For the latter, we know that not only did + * we disable the FBC at the start of the page-flip + * sequence, but also more than one vblank has passed. + * + * For the former case of modeswitching, it is possible + * to switch between two FBC valid configurations + * instantaneously so we do need to disable the FBC + * before we can modify its control registers. We also + * have to wait for the next vblank for that to take + * effect. However, since we delay enabling FBC we can + * assume that a vblank has passed since disabling and + * that we can safely alter the registers in the deferred + * callback. + * + * In the scenario that we go from a valid to invalid + * and then back to valid FBC configuration we have + * no strict enforcement that a vblank occurred since + * disabling the FBC. However, along all current pipe + * disabling paths we do need to wait for a vblank at + * some point. And we wait before enabling FBC anyway. + */ + DRM_DEBUG_KMS("disabling active FBC for update\n"); + intel_disable_fbc(dev); + } + + intel_enable_fbc(crtc); + dev_priv->fbc.no_fbc_reason = FBC_OK; + return; + +out_disable: + /* Multiple disables should be harmless */ + if (intel_fbc_enabled(dev)) { + DRM_DEBUG_KMS("unsupported config, disabling FBC\n"); + intel_disable_fbc(dev); + } + i915_gem_stolen_cleanup_compression(dev); +} + +static void i915_pineview_get_mem_freq(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 tmp; + + tmp = I915_READ(CLKCFG); + + switch (tmp & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_533: + dev_priv->fsb_freq = 533; /* 133*4 */ + break; + case CLKCFG_FSB_800: + dev_priv->fsb_freq = 800; /* 200*4 */ + break; + case CLKCFG_FSB_667: + dev_priv->fsb_freq = 667; /* 167*4 */ + break; + case CLKCFG_FSB_400: + dev_priv->fsb_freq = 400; /* 100*4 */ + break; + } + + switch (tmp & CLKCFG_MEM_MASK) { + case CLKCFG_MEM_533: + dev_priv->mem_freq = 533; + break; + case CLKCFG_MEM_667: + dev_priv->mem_freq = 667; + break; + case CLKCFG_MEM_800: + dev_priv->mem_freq = 800; + break; + } + + /* detect pineview DDR3 setting */ + tmp = I915_READ(CSHRDDR3CTL); + dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0; +} + +static void i915_ironlake_get_mem_freq(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u16 ddrpll, csipll; + + ddrpll = I915_READ16(DDRMPLL1); + csipll = I915_READ16(CSIPLL0); + + switch (ddrpll & 0xff) { + case 0xc: + dev_priv->mem_freq = 800; + break; + case 0x10: + dev_priv->mem_freq = 1066; + break; + case 0x14: + dev_priv->mem_freq = 1333; + break; + case 0x18: + dev_priv->mem_freq = 1600; + break; + default: + DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n", + ddrpll & 0xff); + dev_priv->mem_freq = 0; + break; + } + + dev_priv->ips.r_t = dev_priv->mem_freq; + + switch (csipll & 0x3ff) { + case 0x00c: + dev_priv->fsb_freq = 3200; + break; + case 0x00e: + dev_priv->fsb_freq = 3733; + break; + case 0x010: + dev_priv->fsb_freq = 4266; + break; + case 0x012: + dev_priv->fsb_freq = 4800; + break; + case 0x014: + dev_priv->fsb_freq = 5333; + break; + case 0x016: + dev_priv->fsb_freq = 5866; + break; + case 0x018: + dev_priv->fsb_freq = 6400; + break; + default: + DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n", + csipll & 0x3ff); + dev_priv->fsb_freq = 0; + break; + } + + if (dev_priv->fsb_freq == 3200) { + dev_priv->ips.c_m = 0; + } else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) { + dev_priv->ips.c_m = 1; + } else { + dev_priv->ips.c_m = 2; + } +} + +static const struct cxsr_latency cxsr_latency_table[] = { + {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ + {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ + {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ + {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */ + {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */ + + {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ + {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ + {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ + {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */ + {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */ + + {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ + {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ + {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ + {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */ + {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */ + + {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ + {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ + {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ + {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */ + {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */ + + {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ + {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ + {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ + {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */ + {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */ + + {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ + {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ + {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ + {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */ + {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */ +}; + +static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, + int is_ddr3, + int fsb, + int mem) +{ + const struct cxsr_latency *latency; + int i; + + if (fsb == 0 || mem == 0) + return NULL; + + for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { + latency = &cxsr_latency_table[i]; + if (is_desktop == latency->is_desktop && + is_ddr3 == latency->is_ddr3 && + fsb == latency->fsb_freq && mem == latency->mem_freq) + return latency; + } + + DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); + + return NULL; +} + +static void pineview_disable_cxsr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* deactivate cxsr */ + I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN); +} + +/* + * Latency for FIFO fetches is dependent on several factors: + * - memory configuration (speed, channels) + * - chipset + * - current MCH state + * It can be fairly high in some situations, so here we assume a fairly + * pessimal value. It's a tradeoff between extra memory fetches (if we + * set this value too high, the FIFO will fetch frequently to stay full) + * and power consumption (set it too low to save power and we might see + * FIFO underruns and display "flicker"). + * + * A value of 5us seems to be a good balance; safe for very low end + * platforms but not overly aggressive on lower latency configs. + */ +static const int latency_ns = 5000; + +static int i9xx_get_fifo_size(struct drm_device *dev, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + int size; + + size = dsparb & 0x7f; + if (plane) + size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size; + + DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, + plane ? "B" : "A", size); + + return size; +} + +static int i830_get_fifo_size(struct drm_device *dev, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + int size; + + size = dsparb & 0x1ff; + if (plane) + size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size; + size >>= 1; /* Convert to cachelines */ + + DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, + plane ? "B" : "A", size); + + return size; +} + +static int i845_get_fifo_size(struct drm_device *dev, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + int size; + + size = dsparb & 0x7f; + size >>= 2; /* Convert to cachelines */ + + DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, + plane ? "B" : "A", + size); + + return size; +} + +/* Pineview has different values for various configs */ +static const struct intel_watermark_params pineview_display_wm = { + PINEVIEW_DISPLAY_FIFO, + PINEVIEW_MAX_WM, + PINEVIEW_DFT_WM, + PINEVIEW_GUARD_WM, + PINEVIEW_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params pineview_display_hplloff_wm = { + PINEVIEW_DISPLAY_FIFO, + PINEVIEW_MAX_WM, + PINEVIEW_DFT_HPLLOFF_WM, + PINEVIEW_GUARD_WM, + PINEVIEW_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params pineview_cursor_wm = { + PINEVIEW_CURSOR_FIFO, + PINEVIEW_CURSOR_MAX_WM, + PINEVIEW_CURSOR_DFT_WM, + PINEVIEW_CURSOR_GUARD_WM, + PINEVIEW_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params pineview_cursor_hplloff_wm = { + PINEVIEW_CURSOR_FIFO, + PINEVIEW_CURSOR_MAX_WM, + PINEVIEW_CURSOR_DFT_WM, + PINEVIEW_CURSOR_GUARD_WM, + PINEVIEW_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params g4x_wm_info = { + G4X_FIFO_SIZE, + G4X_MAX_WM, + G4X_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params g4x_cursor_wm_info = { + I965_CURSOR_FIFO, + I965_CURSOR_MAX_WM, + I965_CURSOR_DFT_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params valleyview_wm_info = { + VALLEYVIEW_FIFO_SIZE, + VALLEYVIEW_MAX_WM, + VALLEYVIEW_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params valleyview_cursor_wm_info = { + I965_CURSOR_FIFO, + VALLEYVIEW_CURSOR_MAX_WM, + I965_CURSOR_DFT_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params i965_cursor_wm_info = { + I965_CURSOR_FIFO, + I965_CURSOR_MAX_WM, + I965_CURSOR_DFT_WM, + 2, + I915_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params i945_wm_info = { + I945_FIFO_SIZE, + I915_MAX_WM, + 1, + 2, + I915_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params i915_wm_info = { + I915_FIFO_SIZE, + I915_MAX_WM, + 1, + 2, + I915_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params i830_wm_info = { + I855GM_FIFO_SIZE, + I915_MAX_WM, + 1, + 2, + I830_FIFO_LINE_SIZE +}; +static const struct intel_watermark_params i845_wm_info = { + I830_FIFO_SIZE, + I915_MAX_WM, + 1, + 2, + I830_FIFO_LINE_SIZE +}; + +/** + * intel_calculate_wm - calculate watermark level + * @clock_in_khz: pixel clock + * @wm: chip FIFO params + * @pixel_size: display pixel size + * @latency_ns: memory latency for the platform + * + * Calculate the watermark level (the level at which the display plane will + * start fetching from memory again). Each chip has a different display + * FIFO size and allocation, so the caller needs to figure that out and pass + * in the correct intel_watermark_params structure. + * + * As the pixel clock runs, the FIFO will be drained at a rate that depends + * on the pixel size. When it reaches the watermark level, it'll start + * fetching FIFO line sized based chunks from memory until the FIFO fills + * past the watermark point. If the FIFO drains completely, a FIFO underrun + * will occur, and a display engine hang could result. + */ +static unsigned long intel_calculate_wm(unsigned long clock_in_khz, + const struct intel_watermark_params *wm, + int fifo_size, + int pixel_size, + unsigned long latency_ns) +{ + long entries_required, wm_size; + + /* + * Note: we need to make sure we don't overflow for various clock & + * latency values. + * clocks go from a few thousand to several hundred thousand. + * latency is usually a few thousand + */ + entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) / + 1000; + entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size); + + DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required); + + wm_size = fifo_size - (entries_required + wm->guard_size); + + DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size); + + /* Don't promote wm_size to unsigned... */ + if (wm_size > (long)wm->max_wm) + wm_size = wm->max_wm; + if (wm_size <= 0) + wm_size = wm->default_wm; + return wm_size; +} + +static struct drm_crtc *single_enabled_crtc(struct drm_device *dev) +{ + struct drm_crtc *crtc, *enabled = NULL; + + for_each_crtc(dev, crtc) { + if (intel_crtc_active(crtc)) { + if (enabled) + return NULL; + enabled = crtc; + } + } + + return enabled; +} + +static void pineview_update_wm(struct drm_crtc *unused_crtc) +{ + struct drm_device *dev = unused_crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + const struct cxsr_latency *latency; + u32 reg; + unsigned long wm; + + latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, + dev_priv->fsb_freq, dev_priv->mem_freq); + if (!latency) { + DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); + pineview_disable_cxsr(dev); + return; + } + + crtc = single_enabled_crtc(dev); + if (crtc) { + const struct drm_display_mode *adjusted_mode; + int pixel_size = crtc->primary->fb->bits_per_pixel / 8; + int clock; + + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + clock = adjusted_mode->crtc_clock; + + /* Display SR */ + wm = intel_calculate_wm(clock, &pineview_display_wm, + pineview_display_wm.fifo_size, + pixel_size, latency->display_sr); + reg = I915_READ(DSPFW1); + reg &= ~DSPFW_SR_MASK; + reg |= wm << DSPFW_SR_SHIFT; + I915_WRITE(DSPFW1, reg); + DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg); + + /* cursor SR */ + wm = intel_calculate_wm(clock, &pineview_cursor_wm, + pineview_display_wm.fifo_size, + pixel_size, latency->cursor_sr); + reg = I915_READ(DSPFW3); + reg &= ~DSPFW_CURSOR_SR_MASK; + reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT; + I915_WRITE(DSPFW3, reg); + + /* Display HPLL off SR */ + wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm, + pineview_display_hplloff_wm.fifo_size, + pixel_size, latency->display_hpll_disable); + reg = I915_READ(DSPFW3); + reg &= ~DSPFW_HPLL_SR_MASK; + reg |= wm & DSPFW_HPLL_SR_MASK; + I915_WRITE(DSPFW3, reg); + + /* cursor HPLL off SR */ + wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm, + pineview_display_hplloff_wm.fifo_size, + pixel_size, latency->cursor_hpll_disable); + reg = I915_READ(DSPFW3); + reg &= ~DSPFW_HPLL_CURSOR_MASK; + reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT; + I915_WRITE(DSPFW3, reg); + DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg); + + /* activate cxsr */ + I915_WRITE(DSPFW3, + I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN); + DRM_DEBUG_KMS("Self-refresh is enabled\n"); + } else { + pineview_disable_cxsr(dev); + DRM_DEBUG_KMS("Self-refresh is disabled\n"); + } +} + +static bool g4x_compute_wm0(struct drm_device *dev, + int plane, + const struct intel_watermark_params *display, + int display_latency_ns, + const struct intel_watermark_params *cursor, + int cursor_latency_ns, + int *plane_wm, + int *cursor_wm) +{ + struct drm_crtc *crtc; + const struct drm_display_mode *adjusted_mode; + int htotal, hdisplay, clock, pixel_size; + int line_time_us, line_count; + int entries, tlb_miss; + + crtc = intel_get_crtc_for_plane(dev, plane); + if (!intel_crtc_active(crtc)) { + *cursor_wm = cursor->guard_size; + *plane_wm = display->guard_size; + return false; + } + + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + clock = adjusted_mode->crtc_clock; + htotal = adjusted_mode->crtc_htotal; + hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; + pixel_size = crtc->primary->fb->bits_per_pixel / 8; + + /* Use the small buffer method to calculate plane watermark */ + entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000; + tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8; + if (tlb_miss > 0) + entries += tlb_miss; + entries = DIV_ROUND_UP(entries, display->cacheline_size); + *plane_wm = entries + display->guard_size; + if (*plane_wm > (int)display->max_wm) + *plane_wm = display->max_wm; + + /* Use the large buffer method to calculate cursor watermark */ + line_time_us = max(htotal * 1000 / clock, 1); + line_count = (cursor_latency_ns / line_time_us + 1000) / 1000; + entries = line_count * to_intel_crtc(crtc)->cursor_width * pixel_size; + tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8; + if (tlb_miss > 0) + entries += tlb_miss; + entries = DIV_ROUND_UP(entries, cursor->cacheline_size); + *cursor_wm = entries + cursor->guard_size; + if (*cursor_wm > (int)cursor->max_wm) + *cursor_wm = (int)cursor->max_wm; + + return true; +} + +/* + * Check the wm result. + * + * If any calculated watermark values is larger than the maximum value that + * can be programmed into the associated watermark register, that watermark + * must be disabled. + */ +static bool g4x_check_srwm(struct drm_device *dev, + int display_wm, int cursor_wm, + const struct intel_watermark_params *display, + const struct intel_watermark_params *cursor) +{ + DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n", + display_wm, cursor_wm); + + if (display_wm > display->max_wm) { + DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n", + display_wm, display->max_wm); + return false; + } + + if (cursor_wm > cursor->max_wm) { + DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n", + cursor_wm, cursor->max_wm); + return false; + } + + if (!(display_wm || cursor_wm)) { + DRM_DEBUG_KMS("SR latency is 0, disabling\n"); + return false; + } + + return true; +} + +static bool g4x_compute_srwm(struct drm_device *dev, + int plane, + int latency_ns, + const struct intel_watermark_params *display, + const struct intel_watermark_params *cursor, + int *display_wm, int *cursor_wm) +{ + struct drm_crtc *crtc; + const struct drm_display_mode *adjusted_mode; + int hdisplay, htotal, pixel_size, clock; + unsigned long line_time_us; + int line_count, line_size; + int small, large; + int entries; + + if (!latency_ns) { + *display_wm = *cursor_wm = 0; + return false; + } + + crtc = intel_get_crtc_for_plane(dev, plane); + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + clock = adjusted_mode->crtc_clock; + htotal = adjusted_mode->crtc_htotal; + hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; + pixel_size = crtc->primary->fb->bits_per_pixel / 8; + + line_time_us = max(htotal * 1000 / clock, 1); + line_count = (latency_ns / line_time_us + 1000) / 1000; + line_size = hdisplay * pixel_size; + + /* Use the minimum of the small and large buffer method for primary */ + small = ((clock * pixel_size / 1000) * latency_ns) / 1000; + large = line_count * line_size; + + entries = DIV_ROUND_UP(min(small, large), display->cacheline_size); + *display_wm = entries + display->guard_size; + + /* calculate the self-refresh watermark for display cursor */ + entries = line_count * pixel_size * to_intel_crtc(crtc)->cursor_width; + entries = DIV_ROUND_UP(entries, cursor->cacheline_size); + *cursor_wm = entries + cursor->guard_size; + + return g4x_check_srwm(dev, + *display_wm, *cursor_wm, + display, cursor); +} + +static bool vlv_compute_drain_latency(struct drm_device *dev, + int plane, + int *plane_prec_mult, + int *plane_dl, + int *cursor_prec_mult, + int *cursor_dl) +{ + struct drm_crtc *crtc; + int clock, pixel_size; + int entries; + + crtc = intel_get_crtc_for_plane(dev, plane); + if (!intel_crtc_active(crtc)) + return false; + + clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock; + pixel_size = crtc->primary->fb->bits_per_pixel / 8; /* BPP */ + + entries = (clock / 1000) * pixel_size; + *plane_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) * + pixel_size); + + entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */ + *cursor_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4); + + return true; +} + +/* + * Update drain latency registers of memory arbiter + * + * Valleyview SoC has a new memory arbiter and needs drain latency registers + * to be programmed. Each plane has a drain latency multiplier and a drain + * latency value. + */ + +static void vlv_update_drain_latency(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_prec, planea_dl, planeb_prec, planeb_dl; + int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl; + int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is + either 16 or 32 */ + + /* For plane A, Cursor A */ + if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl, + &cursor_prec_mult, &cursora_dl)) { + cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16; + planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16; + + I915_WRITE(VLV_DDL1, cursora_prec | + (cursora_dl << DDL_CURSORA_SHIFT) | + planea_prec | planea_dl); + } + + /* For plane B, Cursor B */ + if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl, + &cursor_prec_mult, &cursorb_dl)) { + cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16; + planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16; + + I915_WRITE(VLV_DDL2, cursorb_prec | + (cursorb_dl << DDL_CURSORB_SHIFT) | + planeb_prec | planeb_dl); + } +} + +#define single_plane_enabled(mask) is_power_of_2(mask) + +static void valleyview_update_wm(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + static const int sr_latency_ns = 12000; + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm; + int plane_sr, cursor_sr; + int ignore_plane_sr, ignore_cursor_sr; + unsigned int enabled = 0; + + vlv_update_drain_latency(dev); + + if (g4x_compute_wm0(dev, PIPE_A, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planea_wm, &cursora_wm)) + enabled |= 1 << PIPE_A; + + if (g4x_compute_wm0(dev, PIPE_B, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planeb_wm, &cursorb_wm)) + enabled |= 1 << PIPE_B; + + if (single_plane_enabled(enabled) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + sr_latency_ns, + &valleyview_wm_info, + &valleyview_cursor_wm_info, + &plane_sr, &ignore_cursor_sr) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + 2*sr_latency_ns, + &valleyview_wm_info, + &valleyview_cursor_wm_info, + &ignore_plane_sr, &cursor_sr)) { + I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN); + } else { + I915_WRITE(FW_BLC_SELF_VLV, + I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN); + plane_sr = cursor_sr = 0; + } + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", + planea_wm, cursora_wm, + planeb_wm, cursorb_wm, + plane_sr, cursor_sr); + + I915_WRITE(DSPFW1, + (plane_sr << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | + planea_wm); + I915_WRITE(DSPFW2, + (I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + I915_WRITE(DSPFW3, + (I915_READ(DSPFW3) & ~DSPFW_CURSOR_SR_MASK) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); +} + +static void g4x_update_wm(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + static const int sr_latency_ns = 12000; + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm; + int plane_sr, cursor_sr; + unsigned int enabled = 0; + + if (g4x_compute_wm0(dev, PIPE_A, + &g4x_wm_info, latency_ns, + &g4x_cursor_wm_info, latency_ns, + &planea_wm, &cursora_wm)) + enabled |= 1 << PIPE_A; + + if (g4x_compute_wm0(dev, PIPE_B, + &g4x_wm_info, latency_ns, + &g4x_cursor_wm_info, latency_ns, + &planeb_wm, &cursorb_wm)) + enabled |= 1 << PIPE_B; + + if (single_plane_enabled(enabled) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + sr_latency_ns, + &g4x_wm_info, + &g4x_cursor_wm_info, + &plane_sr, &cursor_sr)) { + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + I915_WRITE(FW_BLC_SELF, + I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); + plane_sr = cursor_sr = 0; + } + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", + planea_wm, cursora_wm, + planeb_wm, cursorb_wm, + plane_sr, cursor_sr); + + I915_WRITE(DSPFW1, + (plane_sr << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | + planea_wm); + I915_WRITE(DSPFW2, + (I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + /* HPLL off in SR has some issues on G4x... disable it */ + I915_WRITE(DSPFW3, + (I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); +} + +static void i965_update_wm(struct drm_crtc *unused_crtc) +{ + struct drm_device *dev = unused_crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + int srwm = 1; + int cursor_sr = 16; + + /* Calc sr entries for one plane configs */ + crtc = single_enabled_crtc(dev); + if (crtc) { + /* self-refresh has much higher latency */ + static const int sr_latency_ns = 12000; + const struct drm_display_mode *adjusted_mode = + &to_intel_crtc(crtc)->config.adjusted_mode; + int clock = adjusted_mode->crtc_clock; + int htotal = adjusted_mode->crtc_htotal; + int hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; + int pixel_size = crtc->primary->fb->bits_per_pixel / 8; + unsigned long line_time_us; + int entries; + + line_time_us = max(htotal * 1000 / clock, 1); + + /* Use ns/us then divide to preserve precision */ + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + pixel_size * hdisplay; + entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE); + srwm = I965_FIFO_SIZE - entries; + if (srwm < 0) + srwm = 1; + srwm &= 0x1ff; + DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n", + entries, srwm); + + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + pixel_size * to_intel_crtc(crtc)->cursor_width; + entries = DIV_ROUND_UP(entries, + i965_cursor_wm_info.cacheline_size); + cursor_sr = i965_cursor_wm_info.fifo_size - + (entries + i965_cursor_wm_info.guard_size); + + if (cursor_sr > i965_cursor_wm_info.max_wm) + cursor_sr = i965_cursor_wm_info.max_wm; + + DRM_DEBUG_KMS("self-refresh watermark: display plane %d " + "cursor %d\n", srwm, cursor_sr); + + if (IS_CRESTLINE(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + if (IS_CRESTLINE(dev)) + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); + } + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", + srwm); + + /* 965 has limitations... */ + I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | + (8 << 16) | (8 << 8) | (8 << 0)); + I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); + /* update cursor SR watermark */ + I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); +} + +static void i9xx_update_wm(struct drm_crtc *unused_crtc) +{ + struct drm_device *dev = unused_crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + const struct intel_watermark_params *wm_info; + uint32_t fwater_lo; + uint32_t fwater_hi; + int cwm, srwm = 1; + int fifo_size; + int planea_wm, planeb_wm; + struct drm_crtc *crtc, *enabled = NULL; + + if (IS_I945GM(dev)) + wm_info = &i945_wm_info; + else if (!IS_GEN2(dev)) + wm_info = &i915_wm_info; + else + wm_info = &i830_wm_info; + + fifo_size = dev_priv->display.get_fifo_size(dev, 0); + crtc = intel_get_crtc_for_plane(dev, 0); + if (intel_crtc_active(crtc)) { + const struct drm_display_mode *adjusted_mode; + int cpp = crtc->primary->fb->bits_per_pixel / 8; + if (IS_GEN2(dev)) + cpp = 4; + + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock, + wm_info, fifo_size, cpp, + latency_ns); + enabled = crtc; + } else + planea_wm = fifo_size - wm_info->guard_size; + + fifo_size = dev_priv->display.get_fifo_size(dev, 1); + crtc = intel_get_crtc_for_plane(dev, 1); + if (intel_crtc_active(crtc)) { + const struct drm_display_mode *adjusted_mode; + int cpp = crtc->primary->fb->bits_per_pixel / 8; + if (IS_GEN2(dev)) + cpp = 4; + + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock, + wm_info, fifo_size, cpp, + latency_ns); + if (enabled == NULL) + enabled = crtc; + else + enabled = NULL; + } else + planeb_wm = fifo_size - wm_info->guard_size; + + DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + + if (IS_I915GM(dev) && enabled) { + struct intel_framebuffer *fb; + + fb = to_intel_framebuffer(enabled->primary->fb); + + /* self-refresh seems busted with untiled */ + if (fb->obj->tiling_mode == I915_TILING_NONE) + enabled = NULL; + } + + /* + * Overlay gets an aggressive default since video jitter is bad. + */ + cwm = 2; + + /* Play safe and disable self-refresh before adjusting watermarks. */ + if (IS_I945G(dev) || IS_I945GM(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0); + else if (IS_I915GM(dev)) + I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_SELF_EN)); + + /* Calc sr entries for one plane configs */ + if (HAS_FW_BLC(dev) && enabled) { + /* self-refresh has much higher latency */ + static const int sr_latency_ns = 6000; + const struct drm_display_mode *adjusted_mode = + &to_intel_crtc(enabled)->config.adjusted_mode; + int clock = adjusted_mode->crtc_clock; + int htotal = adjusted_mode->crtc_htotal; + int hdisplay = to_intel_crtc(enabled)->config.pipe_src_w; + int pixel_size = enabled->primary->fb->bits_per_pixel / 8; + unsigned long line_time_us; + int entries; + + line_time_us = max(htotal * 1000 / clock, 1); + + /* Use ns/us then divide to preserve precision */ + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + pixel_size * hdisplay; + entries = DIV_ROUND_UP(entries, wm_info->cacheline_size); + DRM_DEBUG_KMS("self-refresh entries: %d\n", entries); + srwm = wm_info->fifo_size - entries; + if (srwm < 0) + srwm = 1; + + if (IS_I945G(dev) || IS_I945GM(dev)) + I915_WRITE(FW_BLC_SELF, + FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); + else if (IS_I915GM(dev)) + I915_WRITE(FW_BLC_SELF, srwm & 0x3f); + } + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", + planea_wm, planeb_wm, cwm, srwm); + + fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); + fwater_hi = (cwm & 0x1f); + + /* Set request length to 8 cachelines per fetch */ + fwater_lo = fwater_lo | (1 << 24) | (1 << 8); + fwater_hi = fwater_hi | (1 << 8); + + I915_WRITE(FW_BLC, fwater_lo); + I915_WRITE(FW_BLC2, fwater_hi); + + if (HAS_FW_BLC(dev)) { + if (enabled) { + if (IS_I945G(dev) || IS_I945GM(dev)) + I915_WRITE(FW_BLC_SELF, + FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN); + else if (IS_I915GM(dev)) + I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_SELF_EN)); + DRM_DEBUG_KMS("memory self refresh enabled\n"); + } else + DRM_DEBUG_KMS("memory self refresh disabled\n"); + } +} + +static void i845_update_wm(struct drm_crtc *unused_crtc) +{ + struct drm_device *dev = unused_crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + const struct drm_display_mode *adjusted_mode; + uint32_t fwater_lo; + int planea_wm; + + crtc = single_enabled_crtc(dev); + if (crtc == NULL) + return; + + adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; + planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock, + &i845_wm_info, + dev_priv->display.get_fifo_size(dev, 0), + 4, latency_ns); + fwater_lo = I915_READ(FW_BLC) & ~0xfff; + fwater_lo |= (3<<8) | planea_wm; + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm); + + I915_WRITE(FW_BLC, fwater_lo); +} + +static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pixel_rate; + + pixel_rate = intel_crtc->config.adjusted_mode.crtc_clock; + + /* We only use IF-ID interlacing. If we ever use PF-ID we'll need to + * adjust the pixel_rate here. */ + + if (intel_crtc->config.pch_pfit.enabled) { + uint64_t pipe_w, pipe_h, pfit_w, pfit_h; + uint32_t pfit_size = intel_crtc->config.pch_pfit.size; + + pipe_w = intel_crtc->config.pipe_src_w; + pipe_h = intel_crtc->config.pipe_src_h; + pfit_w = (pfit_size >> 16) & 0xFFFF; + pfit_h = pfit_size & 0xFFFF; + if (pipe_w < pfit_w) + pipe_w = pfit_w; + if (pipe_h < pfit_h) + pipe_h = pfit_h; + + pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h, + pfit_w * pfit_h); + } + + return pixel_rate; +} + +/* latency must be in 0.1us units. */ +static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel, + uint32_t latency) +{ + uint64_t ret; + + if (WARN(latency == 0, "Latency value missing\n")) + return UINT_MAX; + + ret = (uint64_t) pixel_rate * bytes_per_pixel * latency; + ret = DIV_ROUND_UP_ULL(ret, 64 * 10000) + 2; + + return ret; +} + +/* latency must be in 0.1us units. */ +static uint32_t ilk_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal, + uint32_t horiz_pixels, uint8_t bytes_per_pixel, + uint32_t latency) +{ + uint32_t ret; + + if (WARN(latency == 0, "Latency value missing\n")) + return UINT_MAX; + + ret = (latency * pixel_rate) / (pipe_htotal * 10000); + ret = (ret + 1) * horiz_pixels * bytes_per_pixel; + ret = DIV_ROUND_UP(ret, 64) + 2; + return ret; +} + +static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels, + uint8_t bytes_per_pixel) +{ + return DIV_ROUND_UP(pri_val * 64, horiz_pixels * bytes_per_pixel) + 2; +} + +struct ilk_pipe_wm_parameters { + bool active; + uint32_t pipe_htotal; + uint32_t pixel_rate; + struct intel_plane_wm_parameters pri; + struct intel_plane_wm_parameters spr; + struct intel_plane_wm_parameters cur; +}; + +struct ilk_wm_maximums { + uint16_t pri; + uint16_t spr; + uint16_t cur; + uint16_t fbc; +}; + +/* used in computing the new watermarks state */ +struct intel_wm_config { + unsigned int num_pipes_active; + bool sprites_enabled; + bool sprites_scaled; +}; + +/* + * For both WM_PIPE and WM_LP. + * mem_value must be in 0.1us units. + */ +static uint32_t ilk_compute_pri_wm(const struct ilk_pipe_wm_parameters *params, + uint32_t mem_value, + bool is_lp) +{ + uint32_t method1, method2; + + if (!params->active || !params->pri.enabled) + return 0; + + method1 = ilk_wm_method1(params->pixel_rate, + params->pri.bytes_per_pixel, + mem_value); + + if (!is_lp) + return method1; + + method2 = ilk_wm_method2(params->pixel_rate, + params->pipe_htotal, + params->pri.horiz_pixels, + params->pri.bytes_per_pixel, + mem_value); + + return min(method1, method2); +} + +/* + * For both WM_PIPE and WM_LP. + * mem_value must be in 0.1us units. + */ +static uint32_t ilk_compute_spr_wm(const struct ilk_pipe_wm_parameters *params, + uint32_t mem_value) +{ + uint32_t method1, method2; + + if (!params->active || !params->spr.enabled) + return 0; + + method1 = ilk_wm_method1(params->pixel_rate, + params->spr.bytes_per_pixel, + mem_value); + method2 = ilk_wm_method2(params->pixel_rate, + params->pipe_htotal, + params->spr.horiz_pixels, + params->spr.bytes_per_pixel, + mem_value); + return min(method1, method2); +} + +/* + * For both WM_PIPE and WM_LP. + * mem_value must be in 0.1us units. + */ +static uint32_t ilk_compute_cur_wm(const struct ilk_pipe_wm_parameters *params, + uint32_t mem_value) +{ + if (!params->active || !params->cur.enabled) + return 0; + + return ilk_wm_method2(params->pixel_rate, + params->pipe_htotal, + params->cur.horiz_pixels, + params->cur.bytes_per_pixel, + mem_value); +} + +/* Only for WM_LP. */ +static uint32_t ilk_compute_fbc_wm(const struct ilk_pipe_wm_parameters *params, + uint32_t pri_val) +{ + if (!params->active || !params->pri.enabled) + return 0; + + return ilk_wm_fbc(pri_val, + params->pri.horiz_pixels, + params->pri.bytes_per_pixel); +} + +static unsigned int ilk_display_fifo_size(const struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen >= 8) + return 3072; + else if (INTEL_INFO(dev)->gen >= 7) + return 768; + else + return 512; +} + +static unsigned int ilk_plane_wm_reg_max(const struct drm_device *dev, + int level, bool is_sprite) +{ + if (INTEL_INFO(dev)->gen >= 8) + /* BDW primary/sprite plane watermarks */ + return level == 0 ? 255 : 2047; + else if (INTEL_INFO(dev)->gen >= 7) + /* IVB/HSW primary/sprite plane watermarks */ + return level == 0 ? 127 : 1023; + else if (!is_sprite) + /* ILK/SNB primary plane watermarks */ + return level == 0 ? 127 : 511; + else + /* ILK/SNB sprite plane watermarks */ + return level == 0 ? 63 : 255; +} + +static unsigned int ilk_cursor_wm_reg_max(const struct drm_device *dev, + int level) +{ + if (INTEL_INFO(dev)->gen >= 7) + return level == 0 ? 63 : 255; + else + return level == 0 ? 31 : 63; +} + +static unsigned int ilk_fbc_wm_reg_max(const struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen >= 8) + return 31; + else + return 15; +} + +/* Calculate the maximum primary/sprite plane watermark */ +static unsigned int ilk_plane_wm_max(const struct drm_device *dev, + int level, + const struct intel_wm_config *config, + enum intel_ddb_partitioning ddb_partitioning, + bool is_sprite) +{ + unsigned int fifo_size = ilk_display_fifo_size(dev); + + /* if sprites aren't enabled, sprites get nothing */ + if (is_sprite && !config->sprites_enabled) + return 0; + + /* HSW allows LP1+ watermarks even with multiple pipes */ + if (level == 0 || config->num_pipes_active > 1) { + fifo_size /= INTEL_INFO(dev)->num_pipes; + + /* + * For some reason the non self refresh + * FIFO size is only half of the self + * refresh FIFO size on ILK/SNB. + */ + if (INTEL_INFO(dev)->gen <= 6) + fifo_size /= 2; + } + + if (config->sprites_enabled) { + /* level 0 is always calculated with 1:1 split */ + if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) { + if (is_sprite) + fifo_size *= 5; + fifo_size /= 6; + } else { + fifo_size /= 2; + } + } + + /* clamp to max that the registers can hold */ + return min(fifo_size, ilk_plane_wm_reg_max(dev, level, is_sprite)); +} + +/* Calculate the maximum cursor plane watermark */ +static unsigned int ilk_cursor_wm_max(const struct drm_device *dev, + int level, + const struct intel_wm_config *config) +{ + /* HSW LP1+ watermarks w/ multiple pipes */ + if (level > 0 && config->num_pipes_active > 1) + return 64; + + /* otherwise just report max that registers can hold */ + return ilk_cursor_wm_reg_max(dev, level); +} + +static void ilk_compute_wm_maximums(const struct drm_device *dev, + int level, + const struct intel_wm_config *config, + enum intel_ddb_partitioning ddb_partitioning, + struct ilk_wm_maximums *max) +{ + max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false); + max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true); + max->cur = ilk_cursor_wm_max(dev, level, config); + max->fbc = ilk_fbc_wm_reg_max(dev); +} + +static void ilk_compute_wm_reg_maximums(struct drm_device *dev, + int level, + struct ilk_wm_maximums *max) +{ + max->pri = ilk_plane_wm_reg_max(dev, level, false); + max->spr = ilk_plane_wm_reg_max(dev, level, true); + max->cur = ilk_cursor_wm_reg_max(dev, level); + max->fbc = ilk_fbc_wm_reg_max(dev); +} + +static bool ilk_validate_wm_level(int level, + const struct ilk_wm_maximums *max, + struct intel_wm_level *result) +{ + bool ret; + + /* already determined to be invalid? */ + if (!result->enable) + return false; + + result->enable = result->pri_val <= max->pri && + result->spr_val <= max->spr && + result->cur_val <= max->cur; + + ret = result->enable; + + /* + * HACK until we can pre-compute everything, + * and thus fail gracefully if LP0 watermarks + * are exceeded... + */ + if (level == 0 && !result->enable) { + if (result->pri_val > max->pri) + DRM_DEBUG_KMS("Primary WM%d too large %u (max %u)\n", + level, result->pri_val, max->pri); + if (result->spr_val > max->spr) + DRM_DEBUG_KMS("Sprite WM%d too large %u (max %u)\n", + level, result->spr_val, max->spr); + if (result->cur_val > max->cur) + DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n", + level, result->cur_val, max->cur); + + result->pri_val = min_t(uint32_t, result->pri_val, max->pri); + result->spr_val = min_t(uint32_t, result->spr_val, max->spr); + result->cur_val = min_t(uint32_t, result->cur_val, max->cur); + result->enable = true; + } + + return ret; +} + +static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv, + int level, + const struct ilk_pipe_wm_parameters *p, + struct intel_wm_level *result) +{ + uint16_t pri_latency = dev_priv->wm.pri_latency[level]; + uint16_t spr_latency = dev_priv->wm.spr_latency[level]; + uint16_t cur_latency = dev_priv->wm.cur_latency[level]; + + /* WM1+ latency values stored in 0.5us units */ + if (level > 0) { + pri_latency *= 5; + spr_latency *= 5; + cur_latency *= 5; + } + + result->pri_val = ilk_compute_pri_wm(p, pri_latency, level); + result->spr_val = ilk_compute_spr_wm(p, spr_latency); + result->cur_val = ilk_compute_cur_wm(p, cur_latency); + result->fbc_val = ilk_compute_fbc_wm(p, result->pri_val); + result->enable = true; +} + +static uint32_t +hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode; + u32 linetime, ips_linetime; + + if (!intel_crtc_active(crtc)) + return 0; + + /* The WM are computed with base on how long it takes to fill a single + * row at the given clock rate, multiplied by 8. + * */ + linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, + mode->crtc_clock); + ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, + intel_ddi_get_cdclk_freq(dev_priv)); + + return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) | + PIPE_WM_LINETIME_TIME(linetime); +} + +static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[5]) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { + uint64_t sskpd = I915_READ64(MCH_SSKPD); + + wm[0] = (sskpd >> 56) & 0xFF; + if (wm[0] == 0) + wm[0] = sskpd & 0xF; + wm[1] = (sskpd >> 4) & 0xFF; + wm[2] = (sskpd >> 12) & 0xFF; + wm[3] = (sskpd >> 20) & 0x1FF; + wm[4] = (sskpd >> 32) & 0x1FF; + } else if (INTEL_INFO(dev)->gen >= 6) { + uint32_t sskpd = I915_READ(MCH_SSKPD); + + wm[0] = (sskpd >> SSKPD_WM0_SHIFT) & SSKPD_WM_MASK; + wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK; + wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK; + wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK; + } else if (INTEL_INFO(dev)->gen >= 5) { + uint32_t mltr = I915_READ(MLTR_ILK); + + /* ILK primary LP0 latency is 700 ns */ + wm[0] = 7; + wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK; + wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK; + } +} + +static void intel_fixup_spr_wm_latency(struct drm_device *dev, uint16_t wm[5]) +{ + /* ILK sprite LP0 latency is 1300 ns */ + if (INTEL_INFO(dev)->gen == 5) + wm[0] = 13; +} + +static void intel_fixup_cur_wm_latency(struct drm_device *dev, uint16_t wm[5]) +{ + /* ILK cursor LP0 latency is 1300 ns */ + if (INTEL_INFO(dev)->gen == 5) + wm[0] = 13; + + /* WaDoubleCursorLP3Latency:ivb */ + if (IS_IVYBRIDGE(dev)) + wm[3] *= 2; +} + +int ilk_wm_max_level(const struct drm_device *dev) +{ + /* how many WM levels are we expecting */ + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + return 4; + else if (INTEL_INFO(dev)->gen >= 6) + return 3; + else + return 2; +} + +static void intel_print_wm_latency(struct drm_device *dev, + const char *name, + const uint16_t wm[5]) +{ + int level, max_level = ilk_wm_max_level(dev); + + for (level = 0; level <= max_level; level++) { + unsigned int latency = wm[level]; + + if (latency == 0) { + DRM_ERROR("%s WM%d latency not provided\n", + name, level); + continue; + } + + /* WM1+ latency values in 0.5us units */ + if (level > 0) + latency *= 5; + + DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n", + name, level, wm[level], + latency / 10, latency % 10); + } +} + +static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv, + uint16_t wm[5], uint16_t min) +{ + int level, max_level = ilk_wm_max_level(dev_priv->dev); + + if (wm[0] >= min) + return false; + + wm[0] = max(wm[0], min); + for (level = 1; level <= max_level; level++) + wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5)); + + return true; +} + +static void snb_wm_latency_quirk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + bool changed; + + /* + * The BIOS provided WM memory latency values are often + * inadequate for high resolution displays. Adjust them. + */ + changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | + ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) | + ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12); + + if (!changed) + return; + + DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n"); + intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); + intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); + intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); +} + +static void ilk_setup_wm_latency(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + intel_read_wm_latency(dev, dev_priv->wm.pri_latency); + + memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency, + sizeof(dev_priv->wm.pri_latency)); + memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency, + sizeof(dev_priv->wm.pri_latency)); + + intel_fixup_spr_wm_latency(dev, dev_priv->wm.spr_latency); + intel_fixup_cur_wm_latency(dev, dev_priv->wm.cur_latency); + + intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency); + intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency); + intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency); + + if (IS_GEN6(dev)) + snb_wm_latency_quirk(dev); +} + +static void ilk_compute_wm_parameters(struct drm_crtc *crtc, + struct ilk_pipe_wm_parameters *p) +{ + struct drm_device *dev = crtc->dev; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + enum pipe pipe = intel_crtc->pipe; + struct drm_plane *plane; + + if (!intel_crtc_active(crtc)) + return; + + p->active = true; + p->pipe_htotal = intel_crtc->config.adjusted_mode.crtc_htotal; + p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); + p->pri.bytes_per_pixel = crtc->primary->fb->bits_per_pixel / 8; + p->cur.bytes_per_pixel = 4; + p->pri.horiz_pixels = intel_crtc->config.pipe_src_w; + p->cur.horiz_pixels = intel_crtc->cursor_width; + /* TODO: for now, assume primary and cursor planes are always enabled. */ + p->pri.enabled = true; + p->cur.enabled = true; + + drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) { + struct intel_plane *intel_plane = to_intel_plane(plane); + + if (intel_plane->pipe == pipe) { + p->spr = intel_plane->wm; + break; + } + } +} + +static void ilk_compute_wm_config(struct drm_device *dev, + struct intel_wm_config *config) +{ + struct intel_crtc *intel_crtc; + + /* Compute the currently _active_ config */ + for_each_intel_crtc(dev, intel_crtc) { + const struct intel_pipe_wm *wm = &intel_crtc->wm.active; + + if (!wm->pipe_enabled) + continue; + + config->sprites_enabled |= wm->sprites_enabled; + config->sprites_scaled |= wm->sprites_scaled; + config->num_pipes_active++; + } +} + +/* Compute new watermarks for the pipe */ +static bool intel_compute_pipe_wm(struct drm_crtc *crtc, + const struct ilk_pipe_wm_parameters *params, + struct intel_pipe_wm *pipe_wm) +{ + struct drm_device *dev = crtc->dev; + const struct drm_i915_private *dev_priv = dev->dev_private; + int level, max_level = ilk_wm_max_level(dev); + /* LP0 watermark maximums depend on this pipe alone */ + struct intel_wm_config config = { + .num_pipes_active = 1, + .sprites_enabled = params->spr.enabled, + .sprites_scaled = params->spr.scaled, + }; + struct ilk_wm_maximums max; + + pipe_wm->pipe_enabled = params->active; + pipe_wm->sprites_enabled = params->spr.enabled; + pipe_wm->sprites_scaled = params->spr.scaled; + + /* ILK/SNB: LP2+ watermarks only w/o sprites */ + if (INTEL_INFO(dev)->gen <= 6 && params->spr.enabled) + max_level = 1; + + /* ILK/SNB/IVB: LP1+ watermarks only w/o scaling */ + if (params->spr.scaled) + max_level = 0; + + ilk_compute_wm_level(dev_priv, 0, params, &pipe_wm->wm[0]); + + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + pipe_wm->linetime = hsw_compute_linetime_wm(dev, crtc); + + /* LP0 watermarks always use 1/2 DDB partitioning */ + ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max); + + /* At least LP0 must be valid */ + if (!ilk_validate_wm_level(0, &max, &pipe_wm->wm[0])) + return false; + + ilk_compute_wm_reg_maximums(dev, 1, &max); + + for (level = 1; level <= max_level; level++) { + struct intel_wm_level wm = {}; + + ilk_compute_wm_level(dev_priv, level, params, &wm); + + /* + * Disable any watermark level that exceeds the + * register maximums since such watermarks are + * always invalid. + */ + if (!ilk_validate_wm_level(level, &max, &wm)) + break; + + pipe_wm->wm[level] = wm; + } + + return true; +} + +/* + * Merge the watermarks from all active pipes for a specific level. + */ +static void ilk_merge_wm_level(struct drm_device *dev, + int level, + struct intel_wm_level *ret_wm) +{ + const struct intel_crtc *intel_crtc; + + ret_wm->enable = true; + + for_each_intel_crtc(dev, intel_crtc) { + const struct intel_pipe_wm *active = &intel_crtc->wm.active; + const struct intel_wm_level *wm = &active->wm[level]; + + if (!active->pipe_enabled) + continue; + + /* + * The watermark values may have been used in the past, + * so we must maintain them in the registers for some + * time even if the level is now disabled. + */ + if (!wm->enable) + ret_wm->enable = false; + + ret_wm->pri_val = max(ret_wm->pri_val, wm->pri_val); + ret_wm->spr_val = max(ret_wm->spr_val, wm->spr_val); + ret_wm->cur_val = max(ret_wm->cur_val, wm->cur_val); + ret_wm->fbc_val = max(ret_wm->fbc_val, wm->fbc_val); + } +} + +/* + * Merge all low power watermarks for all active pipes. + */ +static void ilk_wm_merge(struct drm_device *dev, + const struct intel_wm_config *config, + const struct ilk_wm_maximums *max, + struct intel_pipe_wm *merged) +{ + int level, max_level = ilk_wm_max_level(dev); + int last_enabled_level = max_level; + + /* ILK/SNB/IVB: LP1+ watermarks only w/ single pipe */ + if ((INTEL_INFO(dev)->gen <= 6 || IS_IVYBRIDGE(dev)) && + config->num_pipes_active > 1) + return; + + /* ILK: FBC WM must be disabled always */ + merged->fbc_wm_enabled = INTEL_INFO(dev)->gen >= 6; + + /* merge each WM1+ level */ + for (level = 1; level <= max_level; level++) { + struct intel_wm_level *wm = &merged->wm[level]; + + ilk_merge_wm_level(dev, level, wm); + + if (level > last_enabled_level) + wm->enable = false; + else if (!ilk_validate_wm_level(level, max, wm)) + /* make sure all following levels get disabled */ + last_enabled_level = level - 1; + + /* + * The spec says it is preferred to disable + * FBC WMs instead of disabling a WM level. + */ + if (wm->fbc_val > max->fbc) { + if (wm->enable) + merged->fbc_wm_enabled = false; + wm->fbc_val = 0; + } + } + + /* ILK: LP2+ must be disabled when FBC WM is disabled but FBC enabled */ + /* + * FIXME this is racy. FBC might get enabled later. + * What we should check here is whether FBC can be + * enabled sometime later. + */ + if (IS_GEN5(dev) && !merged->fbc_wm_enabled && intel_fbc_enabled(dev)) { + for (level = 2; level <= max_level; level++) { + struct intel_wm_level *wm = &merged->wm[level]; + + wm->enable = false; + } + } +} + +static int ilk_wm_lp_to_level(int wm_lp, const struct intel_pipe_wm *pipe_wm) +{ + /* LP1,LP2,LP3 levels are either 1,2,3 or 1,3,4 */ + return wm_lp + (wm_lp >= 2 && pipe_wm->wm[4].enable); +} + +/* The value we need to program into the WM_LPx latency field */ +static unsigned int ilk_wm_lp_latency(struct drm_device *dev, int level) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + return 2 * level; + else + return dev_priv->wm.pri_latency[level]; +} + +static void ilk_compute_wm_results(struct drm_device *dev, + const struct intel_pipe_wm *merged, + enum intel_ddb_partitioning partitioning, + struct ilk_wm_values *results) +{ + struct intel_crtc *intel_crtc; + int level, wm_lp; + + results->enable_fbc_wm = merged->fbc_wm_enabled; + results->partitioning = partitioning; + + /* LP1+ register values */ + for (wm_lp = 1; wm_lp <= 3; wm_lp++) { + const struct intel_wm_level *r; + + level = ilk_wm_lp_to_level(wm_lp, merged); + + r = &merged->wm[level]; + + /* + * Maintain the watermark values even if the level is + * disabled. Doing otherwise could cause underruns. + */ + results->wm_lp[wm_lp - 1] = + (ilk_wm_lp_latency(dev, level) << WM1_LP_LATENCY_SHIFT) | + (r->pri_val << WM1_LP_SR_SHIFT) | + r->cur_val; + + if (r->enable) + results->wm_lp[wm_lp - 1] |= WM1_LP_SR_EN; + + if (INTEL_INFO(dev)->gen >= 8) + results->wm_lp[wm_lp - 1] |= + r->fbc_val << WM1_LP_FBC_SHIFT_BDW; + else + results->wm_lp[wm_lp - 1] |= + r->fbc_val << WM1_LP_FBC_SHIFT; + + /* + * Always set WM1S_LP_EN when spr_val != 0, even if the + * level is disabled. Doing otherwise could cause underruns. + */ + if (INTEL_INFO(dev)->gen <= 6 && r->spr_val) { + WARN_ON(wm_lp != 1); + results->wm_lp_spr[wm_lp - 1] = WM1S_LP_EN | r->spr_val; + } else + results->wm_lp_spr[wm_lp - 1] = r->spr_val; + } + + /* LP0 register values */ + for_each_intel_crtc(dev, intel_crtc) { + enum pipe pipe = intel_crtc->pipe; + const struct intel_wm_level *r = + &intel_crtc->wm.active.wm[0]; + + if (WARN_ON(!r->enable)) + continue; + + results->wm_linetime[pipe] = intel_crtc->wm.active.linetime; + + results->wm_pipe[pipe] = + (r->pri_val << WM0_PIPE_PLANE_SHIFT) | + (r->spr_val << WM0_PIPE_SPRITE_SHIFT) | + r->cur_val; + } +} + +/* Find the result with the highest level enabled. Check for enable_fbc_wm in + * case both are at the same level. Prefer r1 in case they're the same. */ +static struct intel_pipe_wm *ilk_find_best_result(struct drm_device *dev, + struct intel_pipe_wm *r1, + struct intel_pipe_wm *r2) +{ + int level, max_level = ilk_wm_max_level(dev); + int level1 = 0, level2 = 0; + + for (level = 1; level <= max_level; level++) { + if (r1->wm[level].enable) + level1 = level; + if (r2->wm[level].enable) + level2 = level; + } + + if (level1 == level2) { + if (r2->fbc_wm_enabled && !r1->fbc_wm_enabled) + return r2; + else + return r1; + } else if (level1 > level2) { + return r1; + } else { + return r2; + } +} + +/* dirty bits used to track which watermarks need changes */ +#define WM_DIRTY_PIPE(pipe) (1 << (pipe)) +#define WM_DIRTY_LINETIME(pipe) (1 << (8 + (pipe))) +#define WM_DIRTY_LP(wm_lp) (1 << (15 + (wm_lp))) +#define WM_DIRTY_LP_ALL (WM_DIRTY_LP(1) | WM_DIRTY_LP(2) | WM_DIRTY_LP(3)) +#define WM_DIRTY_FBC (1 << 24) +#define WM_DIRTY_DDB (1 << 25) + +static unsigned int ilk_compute_wm_dirty(struct drm_device *dev, + const struct ilk_wm_values *old, + const struct ilk_wm_values *new) +{ + unsigned int dirty = 0; + enum pipe pipe; + int wm_lp; + + for_each_pipe(pipe) { + if (old->wm_linetime[pipe] != new->wm_linetime[pipe]) { + dirty |= WM_DIRTY_LINETIME(pipe); + /* Must disable LP1+ watermarks too */ + dirty |= WM_DIRTY_LP_ALL; + } + + if (old->wm_pipe[pipe] != new->wm_pipe[pipe]) { + dirty |= WM_DIRTY_PIPE(pipe); + /* Must disable LP1+ watermarks too */ + dirty |= WM_DIRTY_LP_ALL; + } + } + + if (old->enable_fbc_wm != new->enable_fbc_wm) { + dirty |= WM_DIRTY_FBC; + /* Must disable LP1+ watermarks too */ + dirty |= WM_DIRTY_LP_ALL; + } + + if (old->partitioning != new->partitioning) { + dirty |= WM_DIRTY_DDB; + /* Must disable LP1+ watermarks too */ + dirty |= WM_DIRTY_LP_ALL; + } + + /* LP1+ watermarks already deemed dirty, no need to continue */ + if (dirty & WM_DIRTY_LP_ALL) + return dirty; + + /* Find the lowest numbered LP1+ watermark in need of an update... */ + for (wm_lp = 1; wm_lp <= 3; wm_lp++) { + if (old->wm_lp[wm_lp - 1] != new->wm_lp[wm_lp - 1] || + old->wm_lp_spr[wm_lp - 1] != new->wm_lp_spr[wm_lp - 1]) + break; + } + + /* ...and mark it and all higher numbered LP1+ watermarks as dirty */ + for (; wm_lp <= 3; wm_lp++) + dirty |= WM_DIRTY_LP(wm_lp); + + return dirty; +} + +static bool _ilk_disable_lp_wm(struct drm_i915_private *dev_priv, + unsigned int dirty) +{ + struct ilk_wm_values *previous = &dev_priv->wm.hw; + bool changed = false; + + if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] & WM1_LP_SR_EN) { + previous->wm_lp[2] &= ~WM1_LP_SR_EN; + I915_WRITE(WM3_LP_ILK, previous->wm_lp[2]); + changed = true; + } + if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] & WM1_LP_SR_EN) { + previous->wm_lp[1] &= ~WM1_LP_SR_EN; + I915_WRITE(WM2_LP_ILK, previous->wm_lp[1]); + changed = true; + } + if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] & WM1_LP_SR_EN) { + previous->wm_lp[0] &= ~WM1_LP_SR_EN; + I915_WRITE(WM1_LP_ILK, previous->wm_lp[0]); + changed = true; + } + + /* + * Don't touch WM1S_LP_EN here. + * Doing so could cause underruns. + */ + + return changed; +} + +/* + * The spec says we shouldn't write when we don't need, because every write + * causes WMs to be re-evaluated, expending some power. + */ +static void ilk_write_wm_values(struct drm_i915_private *dev_priv, + struct ilk_wm_values *results) +{ + struct drm_device *dev = dev_priv->dev; + struct ilk_wm_values *previous = &dev_priv->wm.hw; + unsigned int dirty; + uint32_t val; + + dirty = ilk_compute_wm_dirty(dev, previous, results); + if (!dirty) + return; + + _ilk_disable_lp_wm(dev_priv, dirty); + + if (dirty & WM_DIRTY_PIPE(PIPE_A)) + I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]); + if (dirty & WM_DIRTY_PIPE(PIPE_B)) + I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]); + if (dirty & WM_DIRTY_PIPE(PIPE_C)) + I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]); + + if (dirty & WM_DIRTY_LINETIME(PIPE_A)) + I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]); + if (dirty & WM_DIRTY_LINETIME(PIPE_B)) + I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]); + if (dirty & WM_DIRTY_LINETIME(PIPE_C)) + I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]); + + if (dirty & WM_DIRTY_DDB) { + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { + val = I915_READ(WM_MISC); + if (results->partitioning == INTEL_DDB_PART_1_2) + val &= ~WM_MISC_DATA_PARTITION_5_6; + else + val |= WM_MISC_DATA_PARTITION_5_6; + I915_WRITE(WM_MISC, val); + } else { + val = I915_READ(DISP_ARB_CTL2); + if (results->partitioning == INTEL_DDB_PART_1_2) + val &= ~DISP_DATA_PARTITION_5_6; + else + val |= DISP_DATA_PARTITION_5_6; + I915_WRITE(DISP_ARB_CTL2, val); + } + } + + if (dirty & WM_DIRTY_FBC) { + val = I915_READ(DISP_ARB_CTL); + if (results->enable_fbc_wm) + val &= ~DISP_FBC_WM_DIS; + else + val |= DISP_FBC_WM_DIS; + I915_WRITE(DISP_ARB_CTL, val); + } + + if (dirty & WM_DIRTY_LP(1) && + previous->wm_lp_spr[0] != results->wm_lp_spr[0]) + I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]); + + if (INTEL_INFO(dev)->gen >= 7) { + if (dirty & WM_DIRTY_LP(2) && previous->wm_lp_spr[1] != results->wm_lp_spr[1]) + I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]); + if (dirty & WM_DIRTY_LP(3) && previous->wm_lp_spr[2] != results->wm_lp_spr[2]) + I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]); + } + + if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] != results->wm_lp[0]) + I915_WRITE(WM1_LP_ILK, results->wm_lp[0]); + if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] != results->wm_lp[1]) + I915_WRITE(WM2_LP_ILK, results->wm_lp[1]); + if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2]) + I915_WRITE(WM3_LP_ILK, results->wm_lp[2]); + + dev_priv->wm.hw = *results; +} + +static bool ilk_disable_lp_wm(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL); +} + +static void ilk_update_wm(struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct ilk_wm_maximums max; + struct ilk_pipe_wm_parameters params = {}; + struct ilk_wm_values results = {}; + enum intel_ddb_partitioning partitioning; + struct intel_pipe_wm pipe_wm = {}; + struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm; + struct intel_wm_config config = {}; + + ilk_compute_wm_parameters(crtc, ¶ms); + + intel_compute_pipe_wm(crtc, ¶ms, &pipe_wm); + + if (!memcmp(&intel_crtc->wm.active, &pipe_wm, sizeof(pipe_wm))) + return; + + intel_crtc->wm.active = pipe_wm; + + ilk_compute_wm_config(dev, &config); + + ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max); + ilk_wm_merge(dev, &config, &max, &lp_wm_1_2); + + /* 5/6 split only in single pipe config on IVB+ */ + if (INTEL_INFO(dev)->gen >= 7 && + config.num_pipes_active == 1 && config.sprites_enabled) { + ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_5_6, &max); + ilk_wm_merge(dev, &config, &max, &lp_wm_5_6); + + best_lp_wm = ilk_find_best_result(dev, &lp_wm_1_2, &lp_wm_5_6); + } else { + best_lp_wm = &lp_wm_1_2; + } + + partitioning = (best_lp_wm == &lp_wm_1_2) ? + INTEL_DDB_PART_1_2 : INTEL_DDB_PART_5_6; + + ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results); + + ilk_write_wm_values(dev_priv, &results); +} + +static void ilk_update_sprite_wm(struct drm_plane *plane, + struct drm_crtc *crtc, + uint32_t sprite_width, int pixel_size, + bool enabled, bool scaled) +{ + struct drm_device *dev = plane->dev; + struct intel_plane *intel_plane = to_intel_plane(plane); + + intel_plane->wm.enabled = enabled; + intel_plane->wm.scaled = scaled; + intel_plane->wm.horiz_pixels = sprite_width; + intel_plane->wm.bytes_per_pixel = pixel_size; + + /* + * IVB workaround: must disable low power watermarks for at least + * one frame before enabling scaling. LP watermarks can be re-enabled + * when scaling is disabled. + * + * WaCxSRDisabledForSpriteScaling:ivb + */ + if (IS_IVYBRIDGE(dev) && scaled && ilk_disable_lp_wm(dev)) + intel_wait_for_vblank(dev, intel_plane->pipe); + + ilk_update_wm(crtc); +} + +static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct ilk_wm_values *hw = &dev_priv->wm.hw; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_pipe_wm *active = &intel_crtc->wm.active; + enum pipe pipe = intel_crtc->pipe; + static const unsigned int wm0_pipe_reg[] = { + [PIPE_A] = WM0_PIPEA_ILK, + [PIPE_B] = WM0_PIPEB_ILK, + [PIPE_C] = WM0_PIPEC_IVB, + }; + + hw->wm_pipe[pipe] = I915_READ(wm0_pipe_reg[pipe]); + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe)); + + active->pipe_enabled = intel_crtc_active(crtc); + + if (active->pipe_enabled) { + u32 tmp = hw->wm_pipe[pipe]; + + /* + * For active pipes LP0 watermark is marked as + * enabled, and LP1+ watermaks as disabled since + * we can't really reverse compute them in case + * multiple pipes are active. + */ + active->wm[0].enable = true; + active->wm[0].pri_val = (tmp & WM0_PIPE_PLANE_MASK) >> WM0_PIPE_PLANE_SHIFT; + active->wm[0].spr_val = (tmp & WM0_PIPE_SPRITE_MASK) >> WM0_PIPE_SPRITE_SHIFT; + active->wm[0].cur_val = tmp & WM0_PIPE_CURSOR_MASK; + active->linetime = hw->wm_linetime[pipe]; + } else { + int level, max_level = ilk_wm_max_level(dev); + + /* + * For inactive pipes, all watermark levels + * should be marked as enabled but zeroed, + * which is what we'd compute them to. + */ + for (level = 0; level <= max_level; level++) + active->wm[level].enable = true; + } +} + +void ilk_wm_get_hw_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct ilk_wm_values *hw = &dev_priv->wm.hw; + struct drm_crtc *crtc; + + for_each_crtc(dev, crtc) + ilk_pipe_wm_get_hw_state(crtc); + + hw->wm_lp[0] = I915_READ(WM1_LP_ILK); + hw->wm_lp[1] = I915_READ(WM2_LP_ILK); + hw->wm_lp[2] = I915_READ(WM3_LP_ILK); + + hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK); + if (INTEL_INFO(dev)->gen >= 7) { + hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB); + hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB); + } + + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ? + INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2; + else if (IS_IVYBRIDGE(dev)) + hw->partitioning = (I915_READ(DISP_ARB_CTL2) & DISP_DATA_PARTITION_5_6) ? + INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2; + + hw->enable_fbc_wm = + !(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS); +} + +/** + * intel_update_watermarks - update FIFO watermark values based on current modes + * + * Calculate watermark values for the various WM regs based on current mode + * and plane configuration. + * + * There are several cases to deal with here: + * - normal (i.e. non-self-refresh) + * - self-refresh (SR) mode + * - lines are large relative to FIFO size (buffer can hold up to 2) + * - lines are small relative to FIFO size (buffer can hold more than 2 + * lines), so need to account for TLB latency + * + * The normal calculation is: + * watermark = dotclock * bytes per pixel * latency + * where latency is platform & configuration dependent (we assume pessimal + * values here). + * + * The SR calculation is: + * watermark = (trunc(latency/line time)+1) * surface width * + * bytes per pixel + * where + * line time = htotal / dotclock + * surface width = hdisplay for normal plane and 64 for cursor + * and latency is assumed to be high, as above. + * + * The final value programmed to the register should always be rounded up, + * and include an extra 2 entries to account for clock crossings. + * + * We don't use the sprite, so we can ignore that. And on Crestline we have + * to set the non-SR watermarks to 8. + */ +void intel_update_watermarks(struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->dev->dev_private; + + if (dev_priv->display.update_wm) + dev_priv->display.update_wm(crtc); +} + +void intel_update_sprite_watermarks(struct drm_plane *plane, + struct drm_crtc *crtc, + uint32_t sprite_width, int pixel_size, + bool enabled, bool scaled) +{ + struct drm_i915_private *dev_priv = plane->dev->dev_private; + + if (dev_priv->display.update_sprite_wm) + dev_priv->display.update_sprite_wm(plane, crtc, sprite_width, + pixel_size, enabled, scaled); +} + +static struct drm_i915_gem_object * +intel_alloc_context_page(struct drm_device *dev) +{ + struct drm_i915_gem_object *ctx; + int ret; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + ctx = i915_gem_alloc_object(dev, 4096); + if (!ctx) { + DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); + return NULL; + } + + ret = i915_gem_obj_ggtt_pin(ctx, 4096, 0); + if (ret) { + DRM_ERROR("failed to pin power context: %d\n", ret); + goto err_unref; + } + + ret = i915_gem_object_set_to_gtt_domain(ctx, 1); + if (ret) { + DRM_ERROR("failed to set-domain on power context: %d\n", ret); + goto err_unpin; + } + + return ctx; + +err_unpin: + i915_gem_object_ggtt_unpin(ctx); +err_unref: + drm_gem_object_unreference(&ctx->base); + return NULL; +} + +/** + * Lock protecting IPS related data structures + */ +DEFINE_SPINLOCK(mchdev_lock); + +/* Global for IPS driver to get at the current i915 device. Protected by + * mchdev_lock. */ +static struct drm_i915_private *i915_mch_dev; + +bool ironlake_set_drps(struct drm_device *dev, u8 val) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u16 rgvswctl; + + assert_spin_locked(&mchdev_lock); + + rgvswctl = I915_READ16(MEMSWCTL); + if (rgvswctl & MEMCTL_CMD_STS) { + DRM_DEBUG("gpu busy, RCS change rejected\n"); + return false; /* still busy with another command */ + } + + rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) | + (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM; + I915_WRITE16(MEMSWCTL, rgvswctl); + POSTING_READ16(MEMSWCTL); + + rgvswctl |= MEMCTL_CMD_STS; + I915_WRITE16(MEMSWCTL, rgvswctl); + + return true; +} + +static void ironlake_enable_drps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 rgvmodectl = I915_READ(MEMMODECTL); + u8 fmax, fmin, fstart, vstart; + + spin_lock_irq(&mchdev_lock); + + /* Enable temp reporting */ + I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN); + I915_WRITE16(TSC1, I915_READ(TSC1) | TSE); + + /* 100ms RC evaluation intervals */ + I915_WRITE(RCUPEI, 100000); + I915_WRITE(RCDNEI, 100000); + + /* Set max/min thresholds to 90ms and 80ms respectively */ + I915_WRITE(RCBMAXAVG, 90000); + I915_WRITE(RCBMINAVG, 80000); + + I915_WRITE(MEMIHYST, 1); + + /* Set up min, max, and cur for interrupt handling */ + fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT; + fmin = (rgvmodectl & MEMMODE_FMIN_MASK); + fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >> + MEMMODE_FSTART_SHIFT; + + vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> + PXVFREQ_PX_SHIFT; + + dev_priv->ips.fmax = fmax; /* IPS callback will increase this */ + dev_priv->ips.fstart = fstart; + + dev_priv->ips.max_delay = fstart; + dev_priv->ips.min_delay = fmin; + dev_priv->ips.cur_delay = fstart; + + DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", + fmax, fmin, fstart); + + I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN); + + /* + * Interrupts will be enabled in ironlake_irq_postinstall + */ + + I915_WRITE(VIDSTART, vstart); + POSTING_READ(VIDSTART); + + rgvmodectl |= MEMMODE_SWMODE_EN; + I915_WRITE(MEMMODECTL, rgvmodectl); + + if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10)) + DRM_ERROR("stuck trying to change perf mode\n"); + mdelay(1); + + ironlake_set_drps(dev, fstart); + + dev_priv->ips.last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) + + I915_READ(0x112e0); + dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies); + dev_priv->ips.last_count2 = I915_READ(0x112f4); + getrawmonotonic(&dev_priv->ips.last_time2); + + spin_unlock_irq(&mchdev_lock); +} + +static void ironlake_disable_drps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u16 rgvswctl; + + spin_lock_irq(&mchdev_lock); + + rgvswctl = I915_READ16(MEMSWCTL); + + /* Ack interrupts, disable EFC interrupt */ + I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN); + I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG); + I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT); + I915_WRITE(DEIIR, DE_PCU_EVENT); + I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT); + + /* Go back to the starting frequency */ + ironlake_set_drps(dev, dev_priv->ips.fstart); + mdelay(1); + rgvswctl |= MEMCTL_CMD_STS; + I915_WRITE(MEMSWCTL, rgvswctl); + mdelay(1); + + spin_unlock_irq(&mchdev_lock); +} + +/* There's a funny hw issue where the hw returns all 0 when reading from + * GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value + * ourselves, instead of doing a rmw cycle (which might result in us clearing + * all limits and the gpu stuck at whatever frequency it is at atm). + */ +static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val) +{ + u32 limits; + + /* Only set the down limit when we've reached the lowest level to avoid + * getting more interrupts, otherwise leave this clear. This prevents a + * race in the hw when coming out of rc6: There's a tiny window where + * the hw runs at the minimal clock before selecting the desired + * frequency, if the down threshold expires in that window we will not + * receive a down interrupt. */ + limits = dev_priv->rps.max_freq_softlimit << 24; + if (val <= dev_priv->rps.min_freq_softlimit) + limits |= dev_priv->rps.min_freq_softlimit << 16; + + return limits; +} + +static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val) +{ + int new_power; + + new_power = dev_priv->rps.power; + switch (dev_priv->rps.power) { + case LOW_POWER: + if (val > dev_priv->rps.efficient_freq + 1 && val > dev_priv->rps.cur_freq) + new_power = BETWEEN; + break; + + case BETWEEN: + if (val <= dev_priv->rps.efficient_freq && val < dev_priv->rps.cur_freq) + new_power = LOW_POWER; + else if (val >= dev_priv->rps.rp0_freq && val > dev_priv->rps.cur_freq) + new_power = HIGH_POWER; + break; + + case HIGH_POWER: + if (val < (dev_priv->rps.rp1_freq + dev_priv->rps.rp0_freq) >> 1 && val < dev_priv->rps.cur_freq) + new_power = BETWEEN; + break; + } + /* Max/min bins are special */ + if (val == dev_priv->rps.min_freq_softlimit) + new_power = LOW_POWER; + if (val == dev_priv->rps.max_freq_softlimit) + new_power = HIGH_POWER; + if (new_power == dev_priv->rps.power) + return; + + /* Note the units here are not exactly 1us, but 1280ns. */ + switch (new_power) { + case LOW_POWER: + /* Upclock if more than 95% busy over 16ms */ + I915_WRITE(GEN6_RP_UP_EI, 12500); + I915_WRITE(GEN6_RP_UP_THRESHOLD, 11800); + + /* Downclock if less than 85% busy over 32ms */ + I915_WRITE(GEN6_RP_DOWN_EI, 25000); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 21250); + + I915_WRITE(GEN6_RP_CONTROL, + GEN6_RP_MEDIA_TURBO | + GEN6_RP_MEDIA_HW_NORMAL_MODE | + GEN6_RP_MEDIA_IS_GFX | + GEN6_RP_ENABLE | + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_AVG); + break; + + case BETWEEN: + /* Upclock if more than 90% busy over 13ms */ + I915_WRITE(GEN6_RP_UP_EI, 10250); + I915_WRITE(GEN6_RP_UP_THRESHOLD, 9225); + + /* Downclock if less than 75% busy over 32ms */ + I915_WRITE(GEN6_RP_DOWN_EI, 25000); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 18750); + + I915_WRITE(GEN6_RP_CONTROL, + GEN6_RP_MEDIA_TURBO | + GEN6_RP_MEDIA_HW_NORMAL_MODE | + GEN6_RP_MEDIA_IS_GFX | + GEN6_RP_ENABLE | + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_AVG); + break; + + case HIGH_POWER: + /* Upclock if more than 85% busy over 10ms */ + I915_WRITE(GEN6_RP_UP_EI, 8000); + I915_WRITE(GEN6_RP_UP_THRESHOLD, 6800); + + /* Downclock if less than 60% busy over 32ms */ + I915_WRITE(GEN6_RP_DOWN_EI, 25000); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 15000); + + I915_WRITE(GEN6_RP_CONTROL, + GEN6_RP_MEDIA_TURBO | + GEN6_RP_MEDIA_HW_NORMAL_MODE | + GEN6_RP_MEDIA_IS_GFX | + GEN6_RP_ENABLE | + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_AVG); + break; + } + + dev_priv->rps.power = new_power; + dev_priv->rps.last_adj = 0; +} + +static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val) +{ + u32 mask = 0; + + if (val > dev_priv->rps.min_freq_softlimit) + mask |= GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT; + if (val < dev_priv->rps.max_freq_softlimit) + mask |= GEN6_PM_RP_UP_THRESHOLD; + + /* IVB and SNB hard hangs on looping batchbuffer + * if GEN6_PM_UP_EI_EXPIRED is masked. + */ + if (INTEL_INFO(dev_priv->dev)->gen <= 7 && !IS_HASWELL(dev_priv->dev)) + mask |= GEN6_PM_RP_UP_EI_EXPIRED; + + if (IS_GEN8(dev_priv->dev)) + mask |= GEN8_PMINTR_REDIRECT_TO_NON_DISP; + + return ~mask; +} + +/* gen6_set_rps is called to update the frequency request, but should also be + * called when the range (min_delay and max_delay) is modified so that we can + * update the GEN6_RP_INTERRUPT_LIMITS register accordingly. */ +void gen6_set_rps(struct drm_device *dev, u8 val) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + WARN_ON(val > dev_priv->rps.max_freq_softlimit); + WARN_ON(val < dev_priv->rps.min_freq_softlimit); + + /* min/max delay may still have been modified so be sure to + * write the limits value. + */ + if (val != dev_priv->rps.cur_freq) { + gen6_set_rps_thresholds(dev_priv, val); + + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + I915_WRITE(GEN6_RPNSWREQ, + HSW_FREQUENCY(val)); + else + I915_WRITE(GEN6_RPNSWREQ, + GEN6_FREQUENCY(val) | + GEN6_OFFSET(0) | + GEN6_AGGRESSIVE_TURBO); + } + + /* Make sure we continue to get interrupts + * until we hit the minimum or maximum frequencies. + */ + I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, gen6_rps_limits(dev_priv, val)); + I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); + + POSTING_READ(GEN6_RPNSWREQ); + + dev_priv->rps.cur_freq = val; + trace_intel_gpu_freq_change(val * 50); +} + +/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down + * + * * If Gfx is Idle, then + * 1. Mask Turbo interrupts + * 2. Bring up Gfx clock + * 3. Change the freq to Rpn and wait till P-Unit updates freq + * 4. Clear the Force GFX CLK ON bit so that Gfx can down + * 5. Unmask Turbo interrupts +*/ +static void vlv_set_rps_idle(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + /* Latest VLV doesn't need to force the gfx clock */ + if (dev->pdev->revision >= 0xd) { + valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); + return; + } + + /* + * When we are idle. Drop to min voltage state. + */ + + if (dev_priv->rps.cur_freq <= dev_priv->rps.min_freq_softlimit) + return; + + /* Mask turbo interrupt so that they will not come in between */ + I915_WRITE(GEN6_PMINTRMSK, 0xffffffff); + + vlv_force_gfx_clock(dev_priv, true); + + dev_priv->rps.cur_freq = dev_priv->rps.min_freq_softlimit; + + vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, + dev_priv->rps.min_freq_softlimit); + + if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS)) + & GENFREQSTATUS) == 0, 5)) + DRM_ERROR("timed out waiting for Punit\n"); + + vlv_force_gfx_clock(dev_priv, false); + + I915_WRITE(GEN6_PMINTRMSK, + gen6_rps_pm_mask(dev_priv, dev_priv->rps.cur_freq)); +} + +void gen6_rps_idle(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + mutex_lock(&dev_priv->rps.hw_lock); + if (dev_priv->rps.enabled) { + if (IS_VALLEYVIEW(dev)) + vlv_set_rps_idle(dev_priv); + else + gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); + dev_priv->rps.last_adj = 0; + } + mutex_unlock(&dev_priv->rps.hw_lock); +} + +void gen6_rps_boost(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + mutex_lock(&dev_priv->rps.hw_lock); + if (dev_priv->rps.enabled) { + if (IS_VALLEYVIEW(dev)) + valleyview_set_rps(dev_priv->dev, dev_priv->rps.max_freq_softlimit); + else + gen6_set_rps(dev_priv->dev, dev_priv->rps.max_freq_softlimit); + dev_priv->rps.last_adj = 0; + } + mutex_unlock(&dev_priv->rps.hw_lock); +} + +void valleyview_set_rps(struct drm_device *dev, u8 val) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + WARN_ON(val > dev_priv->rps.max_freq_softlimit); + WARN_ON(val < dev_priv->rps.min_freq_softlimit); + + DRM_DEBUG_DRIVER("GPU freq request from %d MHz (%u) to %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.cur_freq), + dev_priv->rps.cur_freq, + vlv_gpu_freq(dev_priv, val), val); + + if (val != dev_priv->rps.cur_freq) + vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); + + I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); + + dev_priv->rps.cur_freq = val; + trace_intel_gpu_freq_change(vlv_gpu_freq(dev_priv, val)); +} + +static void gen8_disable_rps_interrupts(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(GEN6_PMINTRMSK, ~GEN8_PMINTR_REDIRECT_TO_NON_DISP); + I915_WRITE(GEN8_GT_IER(2), I915_READ(GEN8_GT_IER(2)) & + ~dev_priv->pm_rps_events); + /* Complete PM interrupt masking here doesn't race with the rps work + * item again unmasking PM interrupts because that is using a different + * register (GEN8_GT_IMR(2)) to mask PM interrupts. The only risk is in + * leaving stale bits in GEN8_GT_IIR(2) and GEN8_GT_IMR(2) which + * gen8_enable_rps will clean up. */ + + spin_lock_irq(&dev_priv->irq_lock); + dev_priv->rps.pm_iir = 0; + spin_unlock_irq(&dev_priv->irq_lock); + + I915_WRITE(GEN8_GT_IIR(2), dev_priv->pm_rps_events); +} + +static void gen6_disable_rps_interrupts(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(GEN6_PMINTRMSK, 0xffffffff); + I915_WRITE(GEN6_PMIER, I915_READ(GEN6_PMIER) & + ~dev_priv->pm_rps_events); + /* Complete PM interrupt masking here doesn't race with the rps work + * item again unmasking PM interrupts because that is using a different + * register (PMIMR) to mask PM interrupts. The only risk is in leaving + * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */ + + spin_lock_irq(&dev_priv->irq_lock); + dev_priv->rps.pm_iir = 0; + spin_unlock_irq(&dev_priv->irq_lock); + + I915_WRITE(GEN6_PMIIR, dev_priv->pm_rps_events); +} + +static void gen6_disable_rps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(GEN6_RC_CONTROL, 0); + I915_WRITE(GEN6_RPNSWREQ, 1 << 31); + + if (IS_BROADWELL(dev)) + gen8_disable_rps_interrupts(dev); + else + gen6_disable_rps_interrupts(dev); +} + +static void valleyview_disable_rps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(GEN6_RC_CONTROL, 0); + + gen6_disable_rps_interrupts(dev); +} + +static void intel_print_rc6_info(struct drm_device *dev, u32 mode) +{ + if (IS_VALLEYVIEW(dev)) { + if (mode & (GEN7_RC_CTL_TO_MODE | GEN6_RC_CTL_EI_MODE(1))) + mode = GEN6_RC_CTL_RC6_ENABLE; + else + mode = 0; + } + DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n", + (mode & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off", + (mode & GEN6_RC_CTL_RC6p_ENABLE) ? "on" : "off", + (mode & GEN6_RC_CTL_RC6pp_ENABLE) ? "on" : "off"); +} + +static int sanitize_rc6_option(const struct drm_device *dev, int enable_rc6) +{ + /* No RC6 before Ironlake */ + if (INTEL_INFO(dev)->gen < 5) + return 0; + + /* RC6 is only on Ironlake mobile not on desktop */ + if (INTEL_INFO(dev)->gen == 5 && !IS_IRONLAKE_M(dev)) + return 0; + + /* Respect the kernel parameter if it is set */ + if (enable_rc6 >= 0) { + int mask; + + if (INTEL_INFO(dev)->gen == 6 || IS_IVYBRIDGE(dev)) + mask = INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE | + INTEL_RC6pp_ENABLE; + else + mask = INTEL_RC6_ENABLE; + + if ((enable_rc6 & mask) != enable_rc6) + DRM_INFO("Adjusting RC6 mask to %d (requested %d, valid %d)\n", + enable_rc6 & mask, enable_rc6, mask); + + return enable_rc6 & mask; + } + + /* Disable RC6 on Ironlake */ + if (INTEL_INFO(dev)->gen == 5) + return 0; + + if (IS_IVYBRIDGE(dev)) + return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE); + + return INTEL_RC6_ENABLE; +} + +int intel_enable_rc6(const struct drm_device *dev) +{ + return i915.enable_rc6; +} + +static void gen8_enable_rps_interrupts(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + spin_lock_irq(&dev_priv->irq_lock); + WARN_ON(dev_priv->rps.pm_iir); + bdw_enable_pm_irq(dev_priv, dev_priv->pm_rps_events); + I915_WRITE(GEN8_GT_IIR(2), dev_priv->pm_rps_events); + spin_unlock_irq(&dev_priv->irq_lock); +} + +static void gen6_enable_rps_interrupts(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + spin_lock_irq(&dev_priv->irq_lock); + WARN_ON(dev_priv->rps.pm_iir); + snb_enable_pm_irq(dev_priv, dev_priv->pm_rps_events); + I915_WRITE(GEN6_PMIIR, dev_priv->pm_rps_events); + spin_unlock_irq(&dev_priv->irq_lock); +} + +static void parse_rp_state_cap(struct drm_i915_private *dev_priv, u32 rp_state_cap) +{ + /* All of these values are in units of 50MHz */ + dev_priv->rps.cur_freq = 0; + /* static values from HW: RP0 < RPe < RP1 < RPn (min_freq) */ + dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; + dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; + dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; + /* XXX: only BYT has a special efficient freq */ + dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; + /* hw_max = RP0 until we check for overclocking */ + dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; + + /* Preserve min/max settings in case of re-init */ + if (dev_priv->rps.max_freq_softlimit == 0) + dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; + + if (dev_priv->rps.min_freq_softlimit == 0) + dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; +} + +static void gen8_enable_rps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_engine_cs *ring; + uint32_t rc6_mask = 0, rp_state_cap; + int unused; + + /* 1a: Software RC state - RC0 */ + I915_WRITE(GEN6_RC_STATE, 0); + + /* 1c & 1d: Get forcewake during program sequence. Although the driver + * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + + /* 2a: Disable RC states. */ + I915_WRITE(GEN6_RC_CONTROL, 0); + + rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + parse_rp_state_cap(dev_priv, rp_state_cap); + + /* 2b: Program RC6 thresholds.*/ + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ + for_each_ring(ring, dev_priv, unused) + I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); + I915_WRITE(GEN6_RC_SLEEP, 0); + I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */ + + /* 3: Enable RC6 */ + if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE) + rc6_mask = GEN6_RC_CTL_RC6_ENABLE; + intel_print_rc6_info(dev, rc6_mask); + I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | + GEN6_RC_CTL_EI_MODE(1) | + rc6_mask); + + /* 4 Program defaults and thresholds for RPS*/ + I915_WRITE(GEN6_RPNSWREQ, + HSW_FREQUENCY(dev_priv->rps.rp1_freq)); + I915_WRITE(GEN6_RC_VIDEO_FREQ, + HSW_FREQUENCY(dev_priv->rps.rp1_freq)); + /* NB: Docs say 1s, and 1000000 - which aren't equivalent */ + I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */ + + /* Docs recommend 900MHz, and 300 MHz respectively */ + I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, + dev_priv->rps.max_freq_softlimit << 24 | + dev_priv->rps.min_freq_softlimit << 16); + + I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */ + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/ + I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */ + I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */ + + I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); + + /* 5: Enable RPS */ + I915_WRITE(GEN6_RP_CONTROL, + GEN6_RP_MEDIA_TURBO | + GEN6_RP_MEDIA_HW_NORMAL_MODE | + GEN6_RP_MEDIA_IS_GFX | + GEN6_RP_ENABLE | + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_AVG); + + /* 6: Ring frequency + overclocking (our driver does this later */ + + gen6_set_rps(dev, (I915_READ(GEN6_GT_PERF_STATUS) & 0xff00) >> 8); + + gen8_enable_rps_interrupts(dev); + + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); +} + +static void gen6_enable_rps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_engine_cs *ring; + u32 rp_state_cap; + u32 gt_perf_status; + u32 rc6vids, pcu_mbox = 0, rc6_mask = 0; + u32 gtfifodbg; + int rc6_mode; + int i, ret; + + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + + /* Here begins a magic sequence of register writes to enable + * auto-downclocking. + * + * Perhaps there might be some value in exposing these to + * userspace... + */ + I915_WRITE(GEN6_RC_STATE, 0); + + /* Clear the DBG now so we don't confuse earlier errors */ + if ((gtfifodbg = I915_READ(GTFIFODBG))) { + DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg); + I915_WRITE(GTFIFODBG, gtfifodbg); + } + + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + + rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); + + parse_rp_state_cap(dev_priv, rp_state_cap); + + /* disable the counters and set deterministic thresholds */ + I915_WRITE(GEN6_RC_CONTROL, 0); + + I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16); + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30); + I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30); + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); + + for_each_ring(ring, dev_priv, i) + I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); + + I915_WRITE(GEN6_RC_SLEEP, 0); + I915_WRITE(GEN6_RC1e_THRESHOLD, 1000); + if (IS_IVYBRIDGE(dev)) + I915_WRITE(GEN6_RC6_THRESHOLD, 125000); + else + I915_WRITE(GEN6_RC6_THRESHOLD, 50000); + I915_WRITE(GEN6_RC6p_THRESHOLD, 150000); + I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ + + /* Check if we are enabling RC6 */ + rc6_mode = intel_enable_rc6(dev_priv->dev); + if (rc6_mode & INTEL_RC6_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6_ENABLE; + + /* We don't use those on Haswell */ + if (!IS_HASWELL(dev)) { + if (rc6_mode & INTEL_RC6p_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE; + + if (rc6_mode & INTEL_RC6pp_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE; + } + + intel_print_rc6_info(dev, rc6_mask); + + I915_WRITE(GEN6_RC_CONTROL, + rc6_mask | + GEN6_RC_CTL_EI_MODE(1) | + GEN6_RC_CTL_HW_ENABLE); + + /* Power down if completely idle for over 50ms */ + I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 50000); + I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); + + ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0); + if (ret) + DRM_DEBUG_DRIVER("Failed to set the min frequency\n"); + + ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox); + if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */ + DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n", + (dev_priv->rps.max_freq_softlimit & 0xff) * 50, + (pcu_mbox & 0xff) * 50); + dev_priv->rps.max_freq = pcu_mbox & 0xff; + } + + dev_priv->rps.power = HIGH_POWER; /* force a reset */ + gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit); + + gen6_enable_rps_interrupts(dev); + + rc6vids = 0; + ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids); + if (IS_GEN6(dev) && ret) { + DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n"); + } else if (IS_GEN6(dev) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) { + DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n", + GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450); + rc6vids &= 0xffff00; + rc6vids |= GEN6_ENCODE_RC6_VID(450); + ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids); + if (ret) + DRM_ERROR("Couldn't fix incorrect rc6 voltage\n"); + } + + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); +} + +static void __gen6_update_ring_freq(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int min_freq = 15; + unsigned int gpu_freq; + unsigned int max_ia_freq, min_ring_freq; + int scaling_factor = 180; + struct cpufreq_policy *policy; + + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + + policy = cpufreq_cpu_get(0); + if (policy) { + max_ia_freq = policy->cpuinfo.max_freq; + cpufreq_cpu_put(policy); + } else { + /* + * Default to measured freq if none found, PCU will ensure we + * don't go over + */ + max_ia_freq = tsc_khz; + } + + /* Convert from kHz to MHz */ + max_ia_freq /= 1000; + + min_ring_freq = I915_READ(DCLK) & 0xf; + /* convert DDR frequency from units of 266.6MHz to bandwidth */ + min_ring_freq = mult_frac(min_ring_freq, 8, 3); + + /* + * For each potential GPU frequency, load a ring frequency we'd like + * to use for memory access. We do this by specifying the IA frequency + * the PCU should use as a reference to determine the ring frequency. + */ + for (gpu_freq = dev_priv->rps.max_freq_softlimit; gpu_freq >= dev_priv->rps.min_freq_softlimit; + gpu_freq--) { + int diff = dev_priv->rps.max_freq_softlimit - gpu_freq; + unsigned int ia_freq = 0, ring_freq = 0; + + if (INTEL_INFO(dev)->gen >= 8) { + /* max(2 * GT, DDR). NB: GT is 50MHz units */ + ring_freq = max(min_ring_freq, gpu_freq); + } else if (IS_HASWELL(dev)) { + ring_freq = mult_frac(gpu_freq, 5, 4); + ring_freq = max(min_ring_freq, ring_freq); + /* leave ia_freq as the default, chosen by cpufreq */ + } else { + /* On older processors, there is no separate ring + * clock domain, so in order to boost the bandwidth + * of the ring, we need to upclock the CPU (ia_freq). + * + * For GPU frequencies less than 750MHz, + * just use the lowest ring freq. + */ + if (gpu_freq < min_freq) + ia_freq = 800; + else + ia_freq = max_ia_freq - ((diff * scaling_factor) / 2); + ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100); + } + + sandybridge_pcode_write(dev_priv, + GEN6_PCODE_WRITE_MIN_FREQ_TABLE, + ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT | + ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT | + gpu_freq); + } +} + +void gen6_update_ring_freq(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (INTEL_INFO(dev)->gen < 6 || IS_VALLEYVIEW(dev)) + return; + + mutex_lock(&dev_priv->rps.hw_lock); + __gen6_update_ring_freq(dev); + mutex_unlock(&dev_priv->rps.hw_lock); +} + +int valleyview_rps_max_freq(struct drm_i915_private *dev_priv) +{ + u32 val, rp0; + + val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE); + + rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT; + /* Clamp to max */ + rp0 = min_t(u32, rp0, 0xea); + + return rp0; +} + +static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv) +{ + u32 val, rpe; + + val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO); + rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT; + val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI); + rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5; + + return rpe; +} + +int valleyview_rps_min_freq(struct drm_i915_private *dev_priv) +{ + return vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff; +} + +/* Check that the pctx buffer wasn't move under us. */ +static void valleyview_check_pctx(struct drm_i915_private *dev_priv) +{ + unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095; + + WARN_ON(pctx_addr != dev_priv->mm.stolen_base + + dev_priv->vlv_pctx->stolen->start); +} + +static void valleyview_setup_pctx(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_gem_object *pctx; + unsigned long pctx_paddr; + u32 pcbr; + int pctx_size = 24*1024; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + pcbr = I915_READ(VLV_PCBR); + if (pcbr) { + /* BIOS set it up already, grab the pre-alloc'd space */ + int pcbr_offset; + + pcbr_offset = (pcbr & (~4095)) - dev_priv->mm.stolen_base; + pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv->dev, + pcbr_offset, + I915_GTT_OFFSET_NONE, + pctx_size); + goto out; + } + + /* + * From the Gunit register HAS: + * The Gfx driver is expected to program this register and ensure + * proper allocation within Gfx stolen memory. For example, this + * register should be programmed such than the PCBR range does not + * overlap with other ranges, such as the frame buffer, protected + * memory, or any other relevant ranges. + */ + pctx = i915_gem_object_create_stolen(dev, pctx_size); + if (!pctx) { + DRM_DEBUG("not enough stolen space for PCTX, disabling\n"); + return; + } + + pctx_paddr = dev_priv->mm.stolen_base + pctx->stolen->start; + I915_WRITE(VLV_PCBR, pctx_paddr); + +out: + dev_priv->vlv_pctx = pctx; +} + +static void valleyview_cleanup_pctx(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (WARN_ON(!dev_priv->vlv_pctx)) + return; + + drm_gem_object_unreference(&dev_priv->vlv_pctx->base); + dev_priv->vlv_pctx = NULL; +} + +static void valleyview_init_gt_powersave(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + valleyview_setup_pctx(dev); + + mutex_lock(&dev_priv->rps.hw_lock); + + dev_priv->rps.max_freq = valleyview_rps_max_freq(dev_priv); + dev_priv->rps.rp0_freq = dev_priv->rps.max_freq; + DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.max_freq), + dev_priv->rps.max_freq); + + dev_priv->rps.efficient_freq = valleyview_rps_rpe_freq(dev_priv); + DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), + dev_priv->rps.efficient_freq); + + dev_priv->rps.min_freq = valleyview_rps_min_freq(dev_priv); + DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.min_freq), + dev_priv->rps.min_freq); + + /* Preserve min/max settings in case of re-init */ + if (dev_priv->rps.max_freq_softlimit == 0) + dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; + + if (dev_priv->rps.min_freq_softlimit == 0) + dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; + + mutex_unlock(&dev_priv->rps.hw_lock); +} + +static void valleyview_cleanup_gt_powersave(struct drm_device *dev) +{ + valleyview_cleanup_pctx(dev); +} + +static void valleyview_enable_rps(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_engine_cs *ring; + u32 gtfifodbg, val, rc6_mode = 0; + int i; + + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + + valleyview_check_pctx(dev_priv); + + if ((gtfifodbg = I915_READ(GTFIFODBG))) { + DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n", + gtfifodbg); + I915_WRITE(GTFIFODBG, gtfifodbg); + } + + /* If VLV, Forcewake all wells, else re-direct to regular path */ + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + + I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); + I915_WRITE(GEN6_RP_UP_EI, 66000); + I915_WRITE(GEN6_RP_DOWN_EI, 350000); + + I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); + + I915_WRITE(GEN6_RP_CONTROL, + GEN6_RP_MEDIA_TURBO | + GEN6_RP_MEDIA_HW_NORMAL_MODE | + GEN6_RP_MEDIA_IS_GFX | + GEN6_RP_ENABLE | + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_CONT); + + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000); + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); + + for_each_ring(ring, dev_priv, i) + I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10); + + I915_WRITE(GEN6_RC6_THRESHOLD, 0x557); + + /* allows RC6 residency counter to work */ + I915_WRITE(VLV_COUNTER_CONTROL, + _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH | + VLV_MEDIA_RC6_COUNT_EN | + VLV_RENDER_RC6_COUNT_EN)); + if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE) + rc6_mode = GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL; + + intel_print_rc6_info(dev, rc6_mode); + + I915_WRITE(GEN6_RC_CONTROL, rc6_mode); + + val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); + + DRM_DEBUG_DRIVER("GPLL enabled? %s\n", val & 0x10 ? "yes" : "no"); + DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val); + + dev_priv->rps.cur_freq = (val >> 8) & 0xff; + DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.cur_freq), + dev_priv->rps.cur_freq); + + DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n", + vlv_gpu_freq(dev_priv, dev_priv->rps.efficient_freq), + dev_priv->rps.efficient_freq); + + valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq); + + gen6_enable_rps_interrupts(dev); + + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); +} + +void ironlake_teardown_rc6(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->ips.renderctx) { + i915_gem_object_ggtt_unpin(dev_priv->ips.renderctx); + drm_gem_object_unreference(&dev_priv->ips.renderctx->base); + dev_priv->ips.renderctx = NULL; + } + + if (dev_priv->ips.pwrctx) { + i915_gem_object_ggtt_unpin(dev_priv->ips.pwrctx); + drm_gem_object_unreference(&dev_priv->ips.pwrctx->base); + dev_priv->ips.pwrctx = NULL; + } +} + +static void ironlake_disable_rc6(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (I915_READ(PWRCTXA)) { + /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */ + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT); + wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON), + 50); + + I915_WRITE(PWRCTXA, 0); + POSTING_READ(PWRCTXA); + + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT); + POSTING_READ(RSTDBYCTL); + } +} + +static int ironlake_setup_rc6(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->ips.renderctx == NULL) + dev_priv->ips.renderctx = intel_alloc_context_page(dev); + if (!dev_priv->ips.renderctx) + return -ENOMEM; + + if (dev_priv->ips.pwrctx == NULL) + dev_priv->ips.pwrctx = intel_alloc_context_page(dev); + if (!dev_priv->ips.pwrctx) { + ironlake_teardown_rc6(dev); + return -ENOMEM; + } + + return 0; +} + +static void ironlake_enable_rc6(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_engine_cs *ring = &dev_priv->ring[RCS]; + bool was_interruptible; + int ret; + + /* rc6 disabled by default due to repeated reports of hanging during + * boot and resume. + */ + if (!intel_enable_rc6(dev)) + return; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + ret = ironlake_setup_rc6(dev); + if (ret) + return; + + was_interruptible = dev_priv->mm.interruptible; + dev_priv->mm.interruptible = false; + + /* + * GPU can automatically power down the render unit if given a page + * to save state. + */ + ret = intel_ring_begin(ring, 6); + if (ret) { + ironlake_teardown_rc6(dev); + dev_priv->mm.interruptible = was_interruptible; + return; + } + + intel_ring_emit(ring, MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN); + intel_ring_emit(ring, MI_SET_CONTEXT); + intel_ring_emit(ring, i915_gem_obj_ggtt_offset(dev_priv->ips.renderctx) | + MI_MM_SPACE_GTT | + MI_SAVE_EXT_STATE_EN | + MI_RESTORE_EXT_STATE_EN | + MI_RESTORE_INHIBIT); + intel_ring_emit(ring, MI_SUSPEND_FLUSH); + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_FLUSH); + intel_ring_advance(ring); + + /* + * Wait for the command parser to advance past MI_SET_CONTEXT. The HW + * does an implicit flush, combined with MI_FLUSH above, it should be + * safe to assume that renderctx is valid + */ + ret = intel_ring_idle(ring); + dev_priv->mm.interruptible = was_interruptible; + if (ret) { + DRM_ERROR("failed to enable ironlake power savings\n"); + ironlake_teardown_rc6(dev); + return; + } + + I915_WRITE(PWRCTXA, i915_gem_obj_ggtt_offset(dev_priv->ips.pwrctx) | PWRCTX_EN); + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT); + + intel_print_rc6_info(dev, GEN6_RC_CTL_RC6_ENABLE); +} + +static unsigned long intel_pxfreq(u32 vidfreq) +{ + unsigned long freq; + int div = (vidfreq & 0x3f0000) >> 16; + int post = (vidfreq & 0x3000) >> 12; + int pre = (vidfreq & 0x7); + + if (!pre) + return 0; + + freq = ((div * 133333) / ((1<<post) * pre)); + + return freq; +} + +static const struct cparams { + u16 i; + u16 t; + u16 m; + u16 c; +} cparams[] = { + { 1, 1333, 301, 28664 }, + { 1, 1066, 294, 24460 }, + { 1, 800, 294, 25192 }, + { 0, 1333, 276, 27605 }, + { 0, 1066, 276, 27605 }, + { 0, 800, 231, 23784 }, +}; + +static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv) +{ + u64 total_count, diff, ret; + u32 count1, count2, count3, m = 0, c = 0; + unsigned long now = jiffies_to_msecs(jiffies), diff1; + int i; + + assert_spin_locked(&mchdev_lock); + + diff1 = now - dev_priv->ips.last_time1; + + /* Prevent division-by-zero if we are asking too fast. + * Also, we don't get interesting results if we are polling + * faster than once in 10ms, so just return the saved value + * in such cases. + */ + if (diff1 <= 10) + return dev_priv->ips.chipset_power; + + count1 = I915_READ(DMIEC); + count2 = I915_READ(DDREC); + count3 = I915_READ(CSIEC); + + total_count = count1 + count2 + count3; + + /* FIXME: handle per-counter overflow */ + if (total_count < dev_priv->ips.last_count1) { + diff = ~0UL - dev_priv->ips.last_count1; + diff += total_count; + } else { + diff = total_count - dev_priv->ips.last_count1; + } + + for (i = 0; i < ARRAY_SIZE(cparams); i++) { + if (cparams[i].i == dev_priv->ips.c_m && + cparams[i].t == dev_priv->ips.r_t) { + m = cparams[i].m; + c = cparams[i].c; + break; + } + } + + diff = div_u64(diff, diff1); + ret = ((m * diff) + c); + ret = div_u64(ret, 10); + + dev_priv->ips.last_count1 = total_count; + dev_priv->ips.last_time1 = now; + + dev_priv->ips.chipset_power = ret; + + return ret; +} + +unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + unsigned long val; + + if (INTEL_INFO(dev)->gen != 5) + return 0; + + spin_lock_irq(&mchdev_lock); + + val = __i915_chipset_val(dev_priv); + + spin_unlock_irq(&mchdev_lock); + + return val; +} + +unsigned long i915_mch_val(struct drm_i915_private *dev_priv) +{ + unsigned long m, x, b; + u32 tsfs; + + tsfs = I915_READ(TSFS); + + m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT); + x = I915_READ8(TR1); + + b = tsfs & TSFS_INTR_MASK; + + return ((m * x) / 127) - b; +} + +static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid) +{ + struct drm_device *dev = dev_priv->dev; + static const struct v_table { + u16 vd; /* in .1 mil */ + u16 vm; /* in .1 mil */ + } v_table[] = { + { 0, 0, }, + { 375, 0, }, + { 500, 0, }, + { 625, 0, }, + { 750, 0, }, + { 875, 0, }, + { 1000, 0, }, + { 1125, 0, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4125, 3000, }, + { 4250, 3125, }, + { 4375, 3250, }, + { 4500, 3375, }, + { 4625, 3500, }, + { 4750, 3625, }, + { 4875, 3750, }, + { 5000, 3875, }, + { 5125, 4000, }, + { 5250, 4125, }, + { 5375, 4250, }, + { 5500, 4375, }, + { 5625, 4500, }, + { 5750, 4625, }, + { 5875, 4750, }, + { 6000, 4875, }, + { 6125, 5000, }, + { 6250, 5125, }, + { 6375, 5250, }, + { 6500, 5375, }, + { 6625, 5500, }, + { 6750, 5625, }, + { 6875, 5750, }, + { 7000, 5875, }, + { 7125, 6000, }, + { 7250, 6125, }, + { 7375, 6250, }, + { 7500, 6375, }, + { 7625, 6500, }, + { 7750, 6625, }, + { 7875, 6750, }, + { 8000, 6875, }, + { 8125, 7000, }, + { 8250, 7125, }, + { 8375, 7250, }, + { 8500, 7375, }, + { 8625, 7500, }, + { 8750, 7625, }, + { 8875, 7750, }, + { 9000, 7875, }, + { 9125, 8000, }, + { 9250, 8125, }, + { 9375, 8250, }, + { 9500, 8375, }, + { 9625, 8500, }, + { 9750, 8625, }, + { 9875, 8750, }, + { 10000, 8875, }, + { 10125, 9000, }, + { 10250, 9125, }, + { 10375, 9250, }, + { 10500, 9375, }, + { 10625, 9500, }, + { 10750, 9625, }, + { 10875, 9750, }, + { 11000, 9875, }, + { 11125, 10000, }, + { 11250, 10125, }, + { 11375, 10250, }, + { 11500, 10375, }, + { 11625, 10500, }, + { 11750, 10625, }, + { 11875, 10750, }, + { 12000, 10875, }, + { 12125, 11000, }, + { 12250, 11125, }, + { 12375, 11250, }, + { 12500, 11375, }, + { 12625, 11500, }, + { 12750, 11625, }, + { 12875, 11750, }, + { 13000, 11875, }, + { 13125, 12000, }, + { 13250, 12125, }, + { 13375, 12250, }, + { 13500, 12375, }, + { 13625, 12500, }, + { 13750, 12625, }, + { 13875, 12750, }, + { 14000, 12875, }, + { 14125, 13000, }, + { 14250, 13125, }, + { 14375, 13250, }, + { 14500, 13375, }, + { 14625, 13500, }, + { 14750, 13625, }, + { 14875, 13750, }, + { 15000, 13875, }, + { 15125, 14000, }, + { 15250, 14125, }, + { 15375, 14250, }, + { 15500, 14375, }, + { 15625, 14500, }, + { 15750, 14625, }, + { 15875, 14750, }, + { 16000, 14875, }, + { 16125, 15000, }, + }; + if (INTEL_INFO(dev)->is_mobile) + return v_table[pxvid].vm; + else + return v_table[pxvid].vd; +} + +static void __i915_update_gfx_val(struct drm_i915_private *dev_priv) +{ + struct timespec now, diff1; + u64 diff; + unsigned long diffms; + u32 count; + + assert_spin_locked(&mchdev_lock); + + getrawmonotonic(&now); + diff1 = timespec_sub(now, dev_priv->ips.last_time2); + + /* Don't divide by 0 */ + diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000; + if (!diffms) + return; + + count = I915_READ(GFXEC); + + if (count < dev_priv->ips.last_count2) { + diff = ~0UL - dev_priv->ips.last_count2; + diff += count; + } else { + diff = count - dev_priv->ips.last_count2; + } + + dev_priv->ips.last_count2 = count; + dev_priv->ips.last_time2 = now; + + /* More magic constants... */ + diff = diff * 1181; + diff = div_u64(diff, diffms * 10); + dev_priv->ips.gfx_power = diff; +} + +void i915_update_gfx_val(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + if (INTEL_INFO(dev)->gen != 5) + return; + + spin_lock_irq(&mchdev_lock); + + __i915_update_gfx_val(dev_priv); + + spin_unlock_irq(&mchdev_lock); +} + +static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv) +{ + unsigned long t, corr, state1, corr2, state2; + u32 pxvid, ext_v; + + assert_spin_locked(&mchdev_lock); + + pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->rps.cur_freq * 4)); + pxvid = (pxvid >> 24) & 0x7f; + ext_v = pvid_to_extvid(dev_priv, pxvid); + + state1 = ext_v; + + t = i915_mch_val(dev_priv); + + /* Revel in the empirically derived constants */ + + /* Correction factor in 1/100000 units */ + if (t > 80) + corr = ((t * 2349) + 135940); + else if (t >= 50) + corr = ((t * 964) + 29317); + else /* < 50 */ + corr = ((t * 301) + 1004); + + corr = corr * ((150142 * state1) / 10000 - 78642); + corr /= 100000; + corr2 = (corr * dev_priv->ips.corr); + + state2 = (corr2 * state1) / 10000; + state2 /= 100; /* convert to mW */ + + __i915_update_gfx_val(dev_priv); + + return dev_priv->ips.gfx_power + state2; +} + +unsigned long i915_gfx_val(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + unsigned long val; + + if (INTEL_INFO(dev)->gen != 5) + return 0; + + spin_lock_irq(&mchdev_lock); + + val = __i915_gfx_val(dev_priv); + + spin_unlock_irq(&mchdev_lock); + + return val; +} + +/** + * i915_read_mch_val - return value for IPS use + * + * Calculate and return a value for the IPS driver to use when deciding whether + * we have thermal and power headroom to increase CPU or GPU power budget. + */ +unsigned long i915_read_mch_val(void) +{ + struct drm_i915_private *dev_priv; + unsigned long chipset_val, graphics_val, ret = 0; + + spin_lock_irq(&mchdev_lock); + if (!i915_mch_dev) + goto out_unlock; + dev_priv = i915_mch_dev; + + chipset_val = __i915_chipset_val(dev_priv); + graphics_val = __i915_gfx_val(dev_priv); + + ret = chipset_val + graphics_val; + +out_unlock: + spin_unlock_irq(&mchdev_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(i915_read_mch_val); + +/** + * i915_gpu_raise - raise GPU frequency limit + * + * Raise the limit; IPS indicates we have thermal headroom. + */ +bool i915_gpu_raise(void) +{ + struct drm_i915_private *dev_priv; + bool ret = true; + + spin_lock_irq(&mchdev_lock); + if (!i915_mch_dev) { + ret = false; + goto out_unlock; + } + dev_priv = i915_mch_dev; + + if (dev_priv->ips.max_delay > dev_priv->ips.fmax) + dev_priv->ips.max_delay--; + +out_unlock: + spin_unlock_irq(&mchdev_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(i915_gpu_raise); + +/** + * i915_gpu_lower - lower GPU frequency limit + * + * IPS indicates we're close to a thermal limit, so throttle back the GPU + * frequency maximum. + */ +bool i915_gpu_lower(void) +{ + struct drm_i915_private *dev_priv; + bool ret = true; + + spin_lock_irq(&mchdev_lock); + if (!i915_mch_dev) { + ret = false; + goto out_unlock; + } + dev_priv = i915_mch_dev; + + if (dev_priv->ips.max_delay < dev_priv->ips.min_delay) + dev_priv->ips.max_delay++; + +out_unlock: + spin_unlock_irq(&mchdev_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(i915_gpu_lower); + +/** + * i915_gpu_busy - indicate GPU business to IPS + * + * Tell the IPS driver whether or not the GPU is busy. + */ +bool i915_gpu_busy(void) +{ + struct drm_i915_private *dev_priv; + struct intel_engine_cs *ring; + bool ret = false; + int i; + + spin_lock_irq(&mchdev_lock); + if (!i915_mch_dev) + goto out_unlock; + dev_priv = i915_mch_dev; + + for_each_ring(ring, dev_priv, i) + ret |= !list_empty(&ring->request_list); + +out_unlock: + spin_unlock_irq(&mchdev_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(i915_gpu_busy); + +/** + * i915_gpu_turbo_disable - disable graphics turbo + * + * Disable graphics turbo by resetting the max frequency and setting the + * current frequency to the default. + */ +bool i915_gpu_turbo_disable(void) +{ + struct drm_i915_private *dev_priv; + bool ret = true; + + spin_lock_irq(&mchdev_lock); + if (!i915_mch_dev) { + ret = false; + goto out_unlock; + } + dev_priv = i915_mch_dev; + + dev_priv->ips.max_delay = dev_priv->ips.fstart; + + if (!ironlake_set_drps(dev_priv->dev, dev_priv->ips.fstart)) + ret = false; + +out_unlock: + spin_unlock_irq(&mchdev_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable); + +/** + * Tells the intel_ips driver that the i915 driver is now loaded, if + * IPS got loaded first. + * + * This awkward dance is so that neither module has to depend on the + * other in order for IPS to do the appropriate communication of + * GPU turbo limits to i915. + */ +static void +ips_ping_for_i915_load(void) +{ + void (*link)(void); + + link = symbol_get(ips_link_to_i915_driver); + if (link) { + link(); + symbol_put(ips_link_to_i915_driver); + } +} + +void intel_gpu_ips_init(struct drm_i915_private *dev_priv) +{ + /* We only register the i915 ips part with intel-ips once everything is + * set up, to avoid intel-ips sneaking in and reading bogus values. */ + spin_lock_irq(&mchdev_lock); + i915_mch_dev = dev_priv; + spin_unlock_irq(&mchdev_lock); + + ips_ping_for_i915_load(); +} + +void intel_gpu_ips_teardown(void) +{ + spin_lock_irq(&mchdev_lock); + i915_mch_dev = NULL; + spin_unlock_irq(&mchdev_lock); +} + +static void intel_init_emon(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 lcfuse; + u8 pxw[16]; + int i; + + /* Disable to program */ + I915_WRITE(ECR, 0); + POSTING_READ(ECR); + + /* Program energy weights for various events */ + I915_WRITE(SDEW, 0x15040d00); + I915_WRITE(CSIEW0, 0x007f0000); + I915_WRITE(CSIEW1, 0x1e220004); + I915_WRITE(CSIEW2, 0x04000004); + + for (i = 0; i < 5; i++) + I915_WRITE(PEW + (i * 4), 0); + for (i = 0; i < 3; i++) + I915_WRITE(DEW + (i * 4), 0); + + /* Program P-state weights to account for frequency power adjustment */ + for (i = 0; i < 16; i++) { + u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4)); + unsigned long freq = intel_pxfreq(pxvidfreq); + unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >> + PXVFREQ_PX_SHIFT; + unsigned long val; + + val = vid * vid; + val *= (freq / 1000); + val *= 255; + val /= (127*127*900); + if (val > 0xff) + DRM_ERROR("bad pxval: %ld\n", val); + pxw[i] = val; + } + /* Render standby states get 0 weight */ + pxw[14] = 0; + pxw[15] = 0; + + for (i = 0; i < 4; i++) { + u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) | + (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]); + I915_WRITE(PXW + (i * 4), val); + } + + /* Adjust magic regs to magic values (more experimental results) */ + I915_WRITE(OGW0, 0); + I915_WRITE(OGW1, 0); + I915_WRITE(EG0, 0x00007f00); + I915_WRITE(EG1, 0x0000000e); + I915_WRITE(EG2, 0x000e0000); + I915_WRITE(EG3, 0x68000300); + I915_WRITE(EG4, 0x42000000); + I915_WRITE(EG5, 0x00140031); + I915_WRITE(EG6, 0); + I915_WRITE(EG7, 0); + + for (i = 0; i < 8; i++) + I915_WRITE(PXWL + (i * 4), 0); + + /* Enable PMON + select events */ + I915_WRITE(ECR, 0x80000019); + + lcfuse = I915_READ(LCFUSE02); + + dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK); +} + +void intel_init_gt_powersave(struct drm_device *dev) +{ + i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6); + + if (IS_VALLEYVIEW(dev)) + valleyview_init_gt_powersave(dev); +} + +void intel_cleanup_gt_powersave(struct drm_device *dev) +{ + if (IS_VALLEYVIEW(dev)) + valleyview_cleanup_gt_powersave(dev); +} + +void intel_disable_gt_powersave(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Interrupts should be disabled already to avoid re-arming. */ + WARN_ON(dev->irq_enabled); + + if (IS_IRONLAKE_M(dev)) { + ironlake_disable_drps(dev); + ironlake_disable_rc6(dev); + } else if (IS_GEN6(dev) || IS_GEN7(dev) || IS_BROADWELL(dev)) { + if (cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work)) + intel_runtime_pm_put(dev_priv); + + cancel_work_sync(&dev_priv->rps.work); + mutex_lock(&dev_priv->rps.hw_lock); + if (IS_VALLEYVIEW(dev)) + valleyview_disable_rps(dev); + else + gen6_disable_rps(dev); + dev_priv->rps.enabled = false; + mutex_unlock(&dev_priv->rps.hw_lock); + } +} + +static void intel_gen6_powersave_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, struct drm_i915_private, + rps.delayed_resume_work.work); + struct drm_device *dev = dev_priv->dev; + + mutex_lock(&dev_priv->rps.hw_lock); + + if (IS_VALLEYVIEW(dev)) { + valleyview_enable_rps(dev); + } else if (IS_BROADWELL(dev)) { + gen8_enable_rps(dev); + __gen6_update_ring_freq(dev); + } else { + gen6_enable_rps(dev); + __gen6_update_ring_freq(dev); + } + dev_priv->rps.enabled = true; + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_runtime_pm_put(dev_priv); +} + +void intel_enable_gt_powersave(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (IS_IRONLAKE_M(dev)) { + mutex_lock(&dev->struct_mutex); + ironlake_enable_drps(dev); + ironlake_enable_rc6(dev); + intel_init_emon(dev); + mutex_unlock(&dev->struct_mutex); + } else if (IS_GEN6(dev) || IS_GEN7(dev) || IS_BROADWELL(dev)) { + /* + * PCU communication is slow and this doesn't need to be + * done at any specific time, so do this out of our fast path + * to make resume and init faster. + * + * We depend on the HW RC6 power context save/restore + * mechanism when entering D3 through runtime PM suspend. So + * disable RPM until RPS/RC6 is properly setup. We can only + * get here via the driver load/system resume/runtime resume + * paths, so the _noresume version is enough (and in case of + * runtime resume it's necessary). + */ + if (schedule_delayed_work(&dev_priv->rps.delayed_resume_work, + round_jiffies_up_relative(HZ))) + intel_runtime_pm_get_noresume(dev_priv); + } +} + +void intel_reset_gt_powersave(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->rps.enabled = false; + intel_enable_gt_powersave(dev); +} + +static void ibx_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); +} + +static void g4x_disable_trickle_feed(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; + + for_each_pipe(pipe) { + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); + intel_flush_primary_plane(dev_priv, pipe); + } +} + +static void ilk_init_lp_watermarks(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN); + I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN); + I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN); + + /* + * Don't touch WM1S_LP_EN here. + * Doing so could cause underruns. + */ +} + +static void ironlake_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE; + + /* + * Required for FBC + * WaFbcDisableDpfcClockGating:ilk + */ + dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE | + ILK_DPFCUNIT_CLOCK_GATE_DISABLE | + ILK_DPFDUNIT_CLOCK_GATE_ENABLE; + + I915_WRITE(PCH_3DCGDIS0, + MARIUNIT_CLOCK_GATE_DISABLE | + SVSMUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_3DCGDIS1, + VFMUNIT_CLOCK_GATE_DISABLE); + + /* + * According to the spec the following bits should be set in + * order to enable memory self-refresh + * The bit 22/21 of 0x42004 + * The bit 5 of 0x42020 + * The bit 15 of 0x45000 + */ + I915_WRITE(ILK_DISPLAY_CHICKEN2, + (I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL)); + dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE; + I915_WRITE(DISP_ARB_CTL, + (I915_READ(DISP_ARB_CTL) | + DISP_FBC_WM_DIS)); + + ilk_init_lp_watermarks(dev); + + /* + * Based on the document from hardware guys the following bits + * should be set unconditionally in order to enable FBC. + * The bit 22 of 0x42000 + * The bit 22 of 0x42004 + * The bit 7,8,9 of 0x42020. + */ + if (IS_IRONLAKE_M(dev)) { + /* WaFbcAsynchFlipDisableFbcQueue:ilk */ + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE); + } + + I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate); + + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); + I915_WRITE(_3D_CHICKEN2, + _3D_CHICKEN2_WM_READ_PIPELINED << 16 | + _3D_CHICKEN2_WM_READ_PIPELINED); + + /* WaDisableRenderCachePipelinedFlush:ilk */ + I915_WRITE(CACHE_MODE_0, + _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:ilk */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + g4x_disable_trickle_feed(dev); + + ibx_init_clock_gating(dev); +} + +static void cpt_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; + uint32_t val; + + /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE | + PCH_DPLUNIT_CLOCK_GATE_DISABLE | + PCH_CPUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) | + DPLS_EDP_PPS_FIX_DIS); + /* The below fixes the weird display corruption, a few pixels shifted + * downward, on (only) LVDS of some HP laptops with IVY. + */ + for_each_pipe(pipe) { + val = I915_READ(TRANS_CHICKEN2(pipe)); + val |= TRANS_CHICKEN2_TIMING_OVERRIDE; + val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED; + if (dev_priv->vbt.fdi_rx_polarity_inverted) + val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED; + val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK; + val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER; + val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH; + I915_WRITE(TRANS_CHICKEN2(pipe), val); + } + /* WADP0ClockGatingDisable */ + for_each_pipe(pipe) { + I915_WRITE(TRANS_CHICKEN1(pipe), + TRANS_CHICKEN1_DP0UNIT_GC_DISABLE); + } +} + +static void gen6_check_mch_setup(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t tmp; + + tmp = I915_READ(MCH_SSKPD); + if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL) { + DRM_INFO("Wrong MCH_SSKPD value: 0x%08x\n", tmp); + DRM_INFO("This can cause pipe underruns and display issues.\n"); + DRM_INFO("Please upgrade your BIOS to fix this.\n"); + } +} + +static void gen6_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate); + + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); + + /* WaDisableHiZPlanesWhenMSAAEnabled:snb */ + I915_WRITE(_3D_CHICKEN, + _MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB)); + + /* WaSetupGtModeTdRowDispatch:snb */ + if (IS_SNB_GT1(dev)) + I915_WRITE(GEN6_GT_MODE, + _MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:snb */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + /* + * BSpec recoomends 8x4 when MSAA is used, + * however in practice 16x4 seems fastest. + * + * Note that PS/WM thread counts depend on the WIZ hashing + * disable bit, which we don't touch here, but it's good + * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). + */ + I915_WRITE(GEN6_GT_MODE, + GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); + + ilk_init_lp_watermarks(dev); + + I915_WRITE(CACHE_MODE_0, + _MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB)); + + I915_WRITE(GEN6_UCGCTL1, + I915_READ(GEN6_UCGCTL1) | + GEN6_BLBUNIT_CLOCK_GATE_DISABLE | + GEN6_CSUNIT_CLOCK_GATE_DISABLE); + + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. + * + * WaDisableRCCUnitClockGating:snb + * WaDisableRCPBUnitClockGating:snb + */ + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); + + /* WaStripsFansDisableFastClipPerformanceFix:snb */ + I915_WRITE(_3D_CHICKEN3, + _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL)); + + /* + * Bspec says: + * "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and + * 3DSTATE_SF number of SF output attributes is more than 16." + */ + I915_WRITE(_3D_CHICKEN3, + _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH)); + + /* + * According to the spec the following bits should be + * set in order to enable memory self-refresh and fbc: + * The bit21 and bit22 of 0x42000 + * The bit21 and bit22 of 0x42004 + * The bit5 and bit7 of 0x42020 + * The bit14 of 0x70180 + * The bit14 of 0x71180 + * + * WaFbcAsynchFlipDisableFbcQueue:snb + */ + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL); + I915_WRITE(ILK_DSPCLK_GATE_D, + I915_READ(ILK_DSPCLK_GATE_D) | + ILK_DPARBUNIT_CLOCK_GATE_ENABLE | + ILK_DPFDUNIT_CLOCK_GATE_ENABLE); + + g4x_disable_trickle_feed(dev); + + cpt_init_clock_gating(dev); + + gen6_check_mch_setup(dev); +} + +static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv) +{ + uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE); + + /* + * WaVSThreadDispatchOverride:ivb,vlv + * + * This actually overrides the dispatch + * mode for all thread types. + */ + reg &= ~GEN7_FF_SCHED_MASK; + reg |= GEN7_FF_TS_SCHED_HW; + reg |= GEN7_FF_VS_SCHED_HW; + reg |= GEN7_FF_DS_SCHED_HW; + + I915_WRITE(GEN7_FF_THREAD_MODE, reg); +} + +static void lpt_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* + * TODO: this bit should only be enabled when really needed, then + * disabled when not needed anymore in order to save power. + */ + if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) + I915_WRITE(SOUTH_DSPCLK_GATE_D, + I915_READ(SOUTH_DSPCLK_GATE_D) | + PCH_LP_PARTITION_LEVEL_DISABLE); + + /* WADPOClockGatingDisable:hsw */ + I915_WRITE(_TRANSA_CHICKEN1, + I915_READ(_TRANSA_CHICKEN1) | + TRANS_CHICKEN1_DP0UNIT_GC_DISABLE); +} + +static void lpt_suspend_hw(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { + uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D); + + val &= ~PCH_LP_PARTITION_LEVEL_DISABLE; + I915_WRITE(SOUTH_DSPCLK_GATE_D, val); + } +} + +static void gen8_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe; + + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); + + /* FIXME(BDW): Check all the w/a, some might only apply to + * pre-production hw. */ + + /* WaDisablePartialInstShootdown:bdw */ + I915_WRITE(GEN8_ROW_CHICKEN, + _MASKED_BIT_ENABLE(PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE)); + + /* WaDisableThreadStallDopClockGating:bdw */ + /* FIXME: Unclear whether we really need this on production bdw. */ + I915_WRITE(GEN8_ROW_CHICKEN, + _MASKED_BIT_ENABLE(STALL_DOP_GATING_DISABLE)); + + /* + * This GEN8_CENTROID_PIXEL_OPT_DIS W/A is only needed for + * pre-production hardware + */ + I915_WRITE(HALF_SLICE_CHICKEN3, + _MASKED_BIT_ENABLE(GEN8_CENTROID_PIXEL_OPT_DIS)); + I915_WRITE(HALF_SLICE_CHICKEN3, + _MASKED_BIT_ENABLE(GEN8_SAMPLER_POWER_BYPASS_DIS)); + I915_WRITE(GAMTARBMODE, _MASKED_BIT_ENABLE(ARB_MODE_BWGTLB_DISABLE)); + + I915_WRITE(_3D_CHICKEN3, + _3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH(2)); + + I915_WRITE(COMMON_SLICE_CHICKEN2, + _MASKED_BIT_ENABLE(GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE)); + + I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, + _MASKED_BIT_ENABLE(GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE)); + + /* WaDisableDopClockGating:bdw May not be needed for production */ + I915_WRITE(GEN7_ROW_CHICKEN2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + + /* WaSwitchSolVfFArbitrationPriority:bdw */ + I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL); + + /* WaPsrDPAMaskVBlankInSRD:bdw */ + I915_WRITE(CHICKEN_PAR1_1, + I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD); + + /* WaPsrDPRSUnmaskVBlankInSRD:bdw */ + for_each_pipe(pipe) { + I915_WRITE(CHICKEN_PIPESL_1(pipe), + I915_READ(CHICKEN_PIPESL_1(pipe)) | + BDW_DPRS_MASK_VBLANK_SRD); + } + + /* Use Force Non-Coherent whenever executing a 3D context. This is a + * workaround for for a possible hang in the unlikely event a TLB + * invalidation occurs during a PSD flush. + */ + I915_WRITE(HDC_CHICKEN0, + I915_READ(HDC_CHICKEN0) | + _MASKED_BIT_ENABLE(HDC_FORCE_NON_COHERENT)); + + /* WaVSRefCountFullforceMissDisable:bdw */ + /* WaDSRefCountFullforceMissDisable:bdw */ + I915_WRITE(GEN7_FF_THREAD_MODE, + I915_READ(GEN7_FF_THREAD_MODE) & + ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME)); + + /* + * BSpec recommends 8x4 when MSAA is used, + * however in practice 16x4 seems fastest. + * + * Note that PS/WM thread counts depend on the WIZ hashing + * disable bit, which we don't touch here, but it's good + * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). + */ + I915_WRITE(GEN7_GT_MODE, + GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); + + I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL, + _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE)); + + /* WaDisableSDEUnitClockGating:bdw */ + I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | + GEN8_SDEUNIT_CLOCK_GATE_DISABLE); + + /* Wa4x4STCOptimizationDisable:bdw */ + I915_WRITE(CACHE_MODE_1, + _MASKED_BIT_ENABLE(GEN8_4x4_STC_OPTIMIZATION_DISABLE)); +} + +static void haswell_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + ilk_init_lp_watermarks(dev); + + /* L3 caching of data atomics doesn't work -- disable it. */ + I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); + I915_WRITE(HSW_ROW_CHICKEN3, + _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE)); + + /* This is required by WaCatErrorRejectionIssue:hsw */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + + /* WaVSRefCountFullforceMissDisable:hsw */ + I915_WRITE(GEN7_FF_THREAD_MODE, + I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME); + + /* WaDisable_RenderCache_OperationalFlush:hsw */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + /* enable HiZ Raw Stall Optimization */ + I915_WRITE(CACHE_MODE_0_GEN7, + _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE)); + + /* WaDisable4x2SubspanOptimization:hsw */ + I915_WRITE(CACHE_MODE_1, + _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); + + /* + * BSpec recommends 8x4 when MSAA is used, + * however in practice 16x4 seems fastest. + * + * Note that PS/WM thread counts depend on the WIZ hashing + * disable bit, which we don't touch here, but it's good + * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). + */ + I915_WRITE(GEN7_GT_MODE, + GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); + + /* WaSwitchSolVfFArbitrationPriority:hsw */ + I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL); + + /* WaRsPkgCStateDisplayPMReq:hsw */ + I915_WRITE(CHICKEN_PAR1_1, + I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES); + + lpt_init_clock_gating(dev); +} + +static void ivybridge_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t snpcr; + + ilk_init_lp_watermarks(dev); + + I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableEarlyCull:ivb */ + I915_WRITE(_3D_CHICKEN3, + _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL)); + + /* WaDisableBackToBackFlipFix:ivb */ + I915_WRITE(IVB_CHICKEN3, + CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | + CHICKEN3_DGMG_DONE_FIX_DISABLE); + + /* WaDisablePSDDualDispatchEnable:ivb */ + if (IS_IVB_GT1(dev)) + I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, + _MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); + + /* WaDisable_RenderCache_OperationalFlush:ivb */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */ + I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, + GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); + + /* WaApplyL3ControlAndL3ChickenMode:ivb */ + I915_WRITE(GEN7_L3CNTLREG1, + GEN7_WA_FOR_GEN7_L3_CONTROL); + I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, + GEN7_WA_L3_CHICKEN_MODE); + if (IS_IVB_GT1(dev)) + I915_WRITE(GEN7_ROW_CHICKEN2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + else { + /* must write both registers */ + I915_WRITE(GEN7_ROW_CHICKEN2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + I915_WRITE(GEN7_ROW_CHICKEN2_GT2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + } + + /* WaForceL3Serialization:ivb */ + I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) & + ~L3SQ_URB_READ_CAM_MATCH_DISABLE); + + /* + * According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating:ivb workaround. + */ + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + + /* This is required by WaCatErrorRejectionIssue:ivb */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + + g4x_disable_trickle_feed(dev); + + gen7_setup_fixed_func_scheduler(dev_priv); + + if (0) { /* causes HiZ corruption on ivb:gt1 */ + /* enable HiZ Raw Stall Optimization */ + I915_WRITE(CACHE_MODE_0_GEN7, + _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE)); + } + + /* WaDisable4x2SubspanOptimization:ivb */ + I915_WRITE(CACHE_MODE_1, + _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); + + /* + * BSpec recommends 8x4 when MSAA is used, + * however in practice 16x4 seems fastest. + * + * Note that PS/WM thread counts depend on the WIZ hashing + * disable bit, which we don't touch here, but it's good + * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). + */ + I915_WRITE(GEN7_GT_MODE, + GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); + + snpcr = I915_READ(GEN6_MBCUNIT_SNPCR); + snpcr &= ~GEN6_MBC_SNPCR_MASK; + snpcr |= GEN6_MBC_SNPCR_MED; + I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr); + + if (!HAS_PCH_NOP(dev)) + cpt_init_clock_gating(dev); + + gen6_check_mch_setup(dev); +} + +static void valleyview_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 val; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS); + mutex_unlock(&dev_priv->rps.hw_lock); + switch ((val >> 6) & 3) { + case 0: + case 1: + dev_priv->mem_freq = 800; + break; + case 2: + dev_priv->mem_freq = 1066; + break; + case 3: + dev_priv->mem_freq = 1333; + break; + } + DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq); + + dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv); + DRM_DEBUG_DRIVER("Current CD clock rate: %d MHz", + dev_priv->vlv_cdclk_freq); + + I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableEarlyCull:vlv */ + I915_WRITE(_3D_CHICKEN3, + _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL)); + + /* WaDisableBackToBackFlipFix:vlv */ + I915_WRITE(IVB_CHICKEN3, + CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | + CHICKEN3_DGMG_DONE_FIX_DISABLE); + + /* WaPsdDispatchEnable:vlv */ + /* WaDisablePSDDualDispatchEnable:vlv */ + I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, + _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP | + GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); + + /* WaDisable_RenderCache_OperationalFlush:vlv */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + /* WaForceL3Serialization:vlv */ + I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) & + ~L3SQ_URB_READ_CAM_MATCH_DISABLE); + + /* WaDisableDopClockGating:vlv */ + I915_WRITE(GEN7_ROW_CHICKEN2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + + /* This is required by WaCatErrorRejectionIssue:vlv */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + + gen7_setup_fixed_func_scheduler(dev_priv); + + /* + * According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating:vlv workaround. + */ + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableL3Bank2xClockGate:vlv + * Disabling L3 clock gating- MMIO 940c[25] = 1 + * Set bit 25, to disable L3_BANK_2x_CLK_GATING */ + I915_WRITE(GEN7_UCGCTL4, + I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE); + + I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); + + /* + * BSpec says this must be set, even though + * WaDisable4x2SubspanOptimization isn't listed for VLV. + */ + I915_WRITE(CACHE_MODE_1, + _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE)); + + /* + * WaIncreaseL3CreditsForVLVB0:vlv + * This is the hardware default actually. + */ + I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE); + + /* + * WaDisableVLVClockGating_VBIIssue:vlv + * Disable clock gating on th GCFG unit to prevent a delay + * in the reporting of vblank events. + */ + I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS); +} + +static void cherryview_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE); + + I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); + + /* WaDisablePartialInstShootdown:chv */ + I915_WRITE(GEN8_ROW_CHICKEN, + _MASKED_BIT_ENABLE(PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE)); + + /* WaDisableThreadStallDopClockGating:chv */ + I915_WRITE(GEN8_ROW_CHICKEN, + _MASKED_BIT_ENABLE(STALL_DOP_GATING_DISABLE)); + + /* WaVSRefCountFullforceMissDisable:chv */ + /* WaDSRefCountFullforceMissDisable:chv */ + I915_WRITE(GEN7_FF_THREAD_MODE, + I915_READ(GEN7_FF_THREAD_MODE) & + ~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME)); + + /* WaDisableSemaphoreAndSyncFlipWait:chv */ + I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL, + _MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE)); + + /* WaDisableCSUnitClockGating:chv */ + I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | + GEN6_CSUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableSDEUnitClockGating:chv */ + I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | + GEN8_SDEUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableSamplerPowerBypass:chv (pre-production hw) */ + I915_WRITE(HALF_SLICE_CHICKEN3, + _MASKED_BIT_ENABLE(GEN8_SAMPLER_POWER_BYPASS_DIS)); + + /* WaDisableGunitClockGating:chv (pre-production hw) */ + I915_WRITE(VLV_GUNIT_CLOCK_GATE, I915_READ(VLV_GUNIT_CLOCK_GATE) | + GINT_DIS); + + /* WaDisableFfDopClockGating:chv (pre-production hw) */ + I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL, + _MASKED_BIT_ENABLE(GEN8_FF_DOP_CLOCK_GATE_DISABLE)); + + /* WaDisableDopClockGating:chv (pre-production hw) */ + I915_WRITE(GEN7_ROW_CHICKEN2, + _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE)); + I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | + GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE); +} + +static void g4x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate; + + I915_WRITE(RENCLK_GATE_D1, 0); + I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | + GS_UNIT_CLOCK_GATE_DISABLE | + CL_UNIT_CLOCK_GATE_DISABLE); + I915_WRITE(RAMCLK_GATE_D, 0); + dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | + OVRUNIT_CLOCK_GATE_DISABLE | + OVCUNIT_CLOCK_GATE_DISABLE; + if (IS_GM45(dev)) + dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, dspclk_gate); + + /* WaDisableRenderCachePipelinedFlush */ + I915_WRITE(CACHE_MODE_0, + _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:g4x */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + + g4x_disable_trickle_feed(dev); +} + +static void crestline_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); + I915_WRITE(DSPCLK_GATE_D, 0); + I915_WRITE(RAMCLK_GATE_D, 0); + I915_WRITE16(DEUC, 0); + I915_WRITE(MI_ARB_STATE, + _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:gen4 */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); +} + +static void broadwater_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | + I965_RCC_CLOCK_GATE_DISABLE | + I965_RCPB_CLOCK_GATE_DISABLE | + I965_ISC_CLOCK_GATE_DISABLE | + I965_FBC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); + I915_WRITE(MI_ARB_STATE, + _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:gen4 */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); +} + +static void gen3_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dstate = I915_READ(D_STATE); + + dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | + DSTATE_DOT_CLOCK_GATING; + I915_WRITE(D_STATE, dstate); + + if (IS_PINEVIEW(dev)) + I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY)); + + /* IIR "flip pending" means done if this bit is set */ + I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); + + /* interrupts should cause a wake up from C3 */ + I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN)); + + /* On GEN3 we really need to make sure the ARB C3 LP bit is set */ + I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE)); +} + +static void i85x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); + + /* interrupts should cause a wake up from C3 */ + I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) | + _MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE)); +} + +static void i830_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); +} + +void intel_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->display.init_clock_gating(dev); +} + +void intel_suspend_hw(struct drm_device *dev) +{ + if (HAS_PCH_LPT(dev)) + lpt_suspend_hw(dev); +} + +#define for_each_power_well(i, power_well, domain_mask, power_domains) \ + for (i = 0; \ + i < (power_domains)->power_well_count && \ + ((power_well) = &(power_domains)->power_wells[i]); \ + i++) \ + if ((power_well)->domains & (domain_mask)) + +#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \ + for (i = (power_domains)->power_well_count - 1; \ + i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\ + i--) \ + if ((power_well)->domains & (domain_mask)) + +/** + * We should only use the power well if we explicitly asked the hardware to + * enable it, so check if it's enabled and also check if we've requested it to + * be enabled. + */ +static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + return I915_READ(HSW_PWR_WELL_DRIVER) == + (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED); +} + +bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + bool is_enabled; + int i; + + if (dev_priv->pm.suspended) + return false; + + power_domains = &dev_priv->power_domains; + + is_enabled = true; + + for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { + if (power_well->always_on) + continue; + + if (!power_well->hw_enabled) { + is_enabled = false; + break; + } + } + + return is_enabled; +} + +bool intel_display_power_enabled(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + bool ret; + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + ret = intel_display_power_enabled_unlocked(dev_priv, domain); + mutex_unlock(&power_domains->lock); + + return ret; +} + +/* + * Starting with Haswell, we have a "Power Down Well" that can be turned off + * when not needed anymore. We have 4 registers that can request the power well + * to be enabled, and it will only be disabled if none of the registers is + * requesting it to be enabled. + */ +static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + unsigned long irqflags; + + /* + * After we re-enable the power well, if we touch VGA register 0x3d5 + * we'll get unclaimed register interrupts. This stops after we write + * anything to the VGA MSR register. The vgacon module uses this + * register all the time, so if we unbind our driver and, as a + * consequence, bind vgacon, we'll get stuck in an infinite loop at + * console_unlock(). So make here we touch the VGA MSR register, making + * sure vgacon can keep working normally without triggering interrupts + * and error messages. + */ + vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); + outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); + + if (IS_BROADWELL(dev)) { + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_B), + dev_priv->de_irq_mask[PIPE_B]); + I915_WRITE(GEN8_DE_PIPE_IER(PIPE_B), + ~dev_priv->de_irq_mask[PIPE_B] | + GEN8_PIPE_VBLANK); + I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_C), + dev_priv->de_irq_mask[PIPE_C]); + I915_WRITE(GEN8_DE_PIPE_IER(PIPE_C), + ~dev_priv->de_irq_mask[PIPE_C] | + GEN8_PIPE_VBLANK); + POSTING_READ(GEN8_DE_PIPE_IER(PIPE_C)); + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + } +} + +static void hsw_set_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, bool enable) +{ + bool is_enabled, enable_requested; + uint32_t tmp; + + tmp = I915_READ(HSW_PWR_WELL_DRIVER); + is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED; + enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST; + + if (enable) { + if (!enable_requested) + I915_WRITE(HSW_PWR_WELL_DRIVER, + HSW_PWR_WELL_ENABLE_REQUEST); + + if (!is_enabled) { + DRM_DEBUG_KMS("Enabling power well\n"); + if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & + HSW_PWR_WELL_STATE_ENABLED), 20)) + DRM_ERROR("Timeout enabling power well\n"); + } + + hsw_power_well_post_enable(dev_priv); + } else { + if (enable_requested) { + I915_WRITE(HSW_PWR_WELL_DRIVER, 0); + POSTING_READ(HSW_PWR_WELL_DRIVER); + DRM_DEBUG_KMS("Requesting to disable the power well\n"); + } + } +} + +static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, power_well->count > 0); + + /* + * We're taking over the BIOS, so clear any requests made by it since + * the driver is in charge now. + */ + if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) + I915_WRITE(HSW_PWR_WELL_BIOS, 0); +} + +static void hsw_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, true); +} + +static void hsw_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, false); +} + +static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ +} + +static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + return true; +} + +void __vlv_set_power_well(struct drm_i915_private *dev_priv, + enum punit_power_well power_well_id, bool enable) +{ + struct drm_device *dev = dev_priv->dev; + u32 mask; + u32 state; + u32 ctrl; + enum pipe pipe; + + if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) { + if (enable) { + /* + * Enable the CRI clock source so we can get at the + * display and the reference clock for VGA + * hotplug / manual detection. + */ + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | + DPLL_INTEGRATED_CRI_CLK_VLV); + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ + } else { + for_each_pipe(pipe) + assert_pll_disabled(dev_priv, pipe); + /* Assert common reset */ + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & + ~DPIO_CMNRST); + } + } + + mask = PUNIT_PWRGT_MASK(power_well_id); + state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : + PUNIT_PWRGT_PWR_GATE(power_well_id); + + mutex_lock(&dev_priv->rps.hw_lock); + +#define COND \ + ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) + + if (COND) + goto out; + + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); + ctrl &= ~mask; + ctrl |= state; + vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); + + if (wait_for(COND, 100)) + DRM_ERROR("timout setting power well state %08x (%08x)\n", + state, + vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); + +#undef COND + +out: + mutex_unlock(&dev_priv->rps.hw_lock); + + /* + * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - + * 6. De-assert cmn_reset/side_reset. Same as VLV X0. + * a. GUnit 0x2110 bit[0] set to 1 (def 0) + * b. The other bits such as sfr settings / modesel may all + * be set to 0. + * + * This should only be done on init and resume from S3 with + * both PLLs disabled, or we risk losing DPIO and PLL + * synchronization. + */ + if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable) + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); +} + +static void vlv_set_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, bool enable) +{ + enum punit_power_well power_well_id = power_well->data; + + __vlv_set_power_well(dev_priv, power_well_id, enable); +} + +static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, power_well->count > 0); +} + +static void vlv_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, true); +} + +static void vlv_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, false); +} + +static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + int power_well_id = power_well->data; + bool enabled = false; + u32 mask; + u32 state; + u32 ctrl; + + mask = PUNIT_PWRGT_MASK(power_well_id); + ctrl = PUNIT_PWRGT_PWR_ON(power_well_id); + + mutex_lock(&dev_priv->rps.hw_lock); + + state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; + /* + * We only ever set the power-on and power-gate states, anything + * else is unexpected. + */ + WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) && + state != PUNIT_PWRGT_PWR_GATE(power_well_id)); + if (state == ctrl) + enabled = true; + + /* + * A transient state at this point would mean some unexpected party + * is poking at the power controls too. + */ + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; + WARN_ON(ctrl != state); + + mutex_unlock(&dev_priv->rps.hw_lock); + + return enabled; +} + +static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); + + vlv_set_power_well(dev_priv, power_well, true); + + spin_lock_irq(&dev_priv->irq_lock); + valleyview_enable_display_irqs(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); + + /* + * During driver initialization/resume we can avoid restoring the + * part of the HW/SW state that will be inited anyway explicitly. + */ + if (dev_priv->power_domains.initializing) + return; + + intel_hpd_init(dev_priv->dev); + + i915_redisable_vga_power_on(dev_priv->dev); +} + +static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); + + spin_lock_irq(&dev_priv->irq_lock); + valleyview_disable_display_irqs(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); + + vlv_set_power_well(dev_priv, power_well, false); +} + +static void check_power_well_state(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + bool enabled = power_well->ops->is_enabled(dev_priv, power_well); + + if (power_well->always_on || !i915.disable_power_well) { + if (!enabled) + goto mismatch; + + return; + } + + if (enabled != (power_well->count > 0)) + goto mismatch; + + return; + +mismatch: + WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n", + power_well->name, power_well->always_on, enabled, + power_well->count, i915.disable_power_well); +} + +void intel_display_power_get(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + int i; + + intel_runtime_pm_get(dev_priv); + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + + for_each_power_well(i, power_well, BIT(domain), power_domains) { + if (!power_well->count++) { + DRM_DEBUG_KMS("enabling %s\n", power_well->name); + power_well->ops->enable(dev_priv, power_well); + power_well->hw_enabled = true; + } + + check_power_well_state(dev_priv, power_well); + } + + power_domains->domain_use_count[domain]++; + + mutex_unlock(&power_domains->lock); +} + +void intel_display_power_put(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + int i; + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + + WARN_ON(!power_domains->domain_use_count[domain]); + power_domains->domain_use_count[domain]--; + + for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { + WARN_ON(!power_well->count); + + if (!--power_well->count && i915.disable_power_well) { + DRM_DEBUG_KMS("disabling %s\n", power_well->name); + power_well->hw_enabled = false; + power_well->ops->disable(dev_priv, power_well); + } + + check_power_well_state(dev_priv, power_well); + } + + mutex_unlock(&power_domains->lock); + + intel_runtime_pm_put(dev_priv); +} + +static struct i915_power_domains *hsw_pwr; + +/* Display audio driver power well request */ +int i915_request_power_well(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); + return 0; +} +EXPORT_SYMBOL_GPL(i915_request_power_well); + +/* Display audio driver power well release */ +int i915_release_power_well(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); + return 0; +} +EXPORT_SYMBOL_GPL(i915_release_power_well); + +/* + * Private interface for the audio driver to get CDCLK in kHz. + * + * Caller must request power well using i915_request_power_well() prior to + * making the call. + */ +int i915_get_cdclk_freq(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + + return intel_ddi_get_cdclk_freq(dev_priv); +} +EXPORT_SYMBOL_GPL(i915_get_cdclk_freq); + + +#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1) + +#define HSW_ALWAYS_ON_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PIPE_A) | \ + BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ + BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_CRT) | \ + BIT(POWER_DOMAIN_INIT)) +#define HSW_DISPLAY_POWER_DOMAINS ( \ + (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ + BIT(POWER_DOMAIN_INIT)) + +#define BDW_ALWAYS_ON_POWER_DOMAINS ( \ + HSW_ALWAYS_ON_POWER_DOMAINS | \ + BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER)) +#define BDW_DISPLAY_POWER_DOMAINS ( \ + (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT) +#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK + +#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_CRT) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { + .sync_hw = i9xx_always_on_power_well_noop, + .enable = i9xx_always_on_power_well_noop, + .disable = i9xx_always_on_power_well_noop, + .is_enabled = i9xx_always_on_power_well_enabled, +}; + +static struct i915_power_well i9xx_always_on_power_well[] = { + { + .name = "always-on", + .always_on = 1, + .domains = POWER_DOMAIN_MASK, + .ops = &i9xx_always_on_power_well_ops, + }, +}; + +static const struct i915_power_well_ops hsw_power_well_ops = { + .sync_hw = hsw_power_well_sync_hw, + .enable = hsw_power_well_enable, + .disable = hsw_power_well_disable, + .is_enabled = hsw_power_well_enabled, +}; + +static struct i915_power_well hsw_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = HSW_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = HSW_DISPLAY_POWER_DOMAINS, + .ops = &hsw_power_well_ops, + }, +}; + +static struct i915_power_well bdw_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = BDW_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = BDW_DISPLAY_POWER_DOMAINS, + .ops = &hsw_power_well_ops, + }, +}; + +static const struct i915_power_well_ops vlv_display_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = vlv_display_power_well_enable, + .disable = vlv_display_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static const struct i915_power_well_ops vlv_dpio_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = vlv_power_well_enable, + .disable = vlv_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static struct i915_power_well vlv_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = VLV_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = VLV_DISPLAY_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DISP2D, + .ops = &vlv_display_power_well_ops, + }, + { + .name = "dpio-tx-b-01", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, + }, + { + .name = "dpio-tx-b-23", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, + }, + { + .name = "dpio-tx-c-01", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, + }, + { + .name = "dpio-tx-c-23", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, + }, + { + .name = "dpio-common", + .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DPIO_CMN_BC, + .ops = &vlv_dpio_power_well_ops, + }, +}; + +#define set_power_wells(power_domains, __power_wells) ({ \ + (power_domains)->power_wells = (__power_wells); \ + (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \ +}) + +int intel_power_domains_init(struct drm_i915_private *dev_priv) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + + mutex_init(&power_domains->lock); + + /* + * The enabling order will be from lower to higher indexed wells, + * the disabling order is reversed. + */ + if (IS_HASWELL(dev_priv->dev)) { + set_power_wells(power_domains, hsw_power_wells); + hsw_pwr = power_domains; + } else if (IS_BROADWELL(dev_priv->dev)) { + set_power_wells(power_domains, bdw_power_wells); + hsw_pwr = power_domains; + } else if (IS_VALLEYVIEW(dev_priv->dev)) { + set_power_wells(power_domains, vlv_power_wells); + } else { + set_power_wells(power_domains, i9xx_always_on_power_well); + } + + return 0; +} + +void intel_power_domains_remove(struct drm_i915_private *dev_priv) +{ + hsw_pwr = NULL; +} + +static void intel_power_domains_resume(struct drm_i915_private *dev_priv) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + struct i915_power_well *power_well; + int i; + + mutex_lock(&power_domains->lock); + for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { + power_well->ops->sync_hw(dev_priv, power_well); + power_well->hw_enabled = power_well->ops->is_enabled(dev_priv, + power_well); + } + mutex_unlock(&power_domains->lock); +} + +void intel_power_domains_init_hw(struct drm_i915_private *dev_priv) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + + power_domains->initializing = true; + /* For now, we need the power well to be always enabled. */ + intel_display_set_init_power(dev_priv, true); + intel_power_domains_resume(dev_priv); + power_domains->initializing = false; +} + +void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv) +{ + intel_runtime_pm_get(dev_priv); +} + +void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv) +{ + intel_runtime_pm_put(dev_priv); +} + +void intel_runtime_pm_get(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_get_sync(device); + WARN(dev_priv->pm.suspended, "Device still suspended.\n"); +} + +void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n"); + pm_runtime_get_noresume(device); +} + +void intel_runtime_pm_put(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_mark_last_busy(device); + pm_runtime_put_autosuspend(device); +} + +void intel_init_runtime_pm(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_set_active(device); + + /* + * RPM depends on RC6 to save restore the GT HW context, so make RC6 a + * requirement. + */ + if (!intel_enable_rc6(dev)) { + DRM_INFO("RC6 disabled, disabling runtime PM support\n"); + return; + } + + pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */ + pm_runtime_mark_last_busy(device); + pm_runtime_use_autosuspend(device); + + pm_runtime_put_autosuspend(device); +} + +void intel_fini_runtime_pm(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + if (!intel_enable_rc6(dev)) + return; + + /* Make sure we're not suspended first. */ + pm_runtime_get_sync(device); + pm_runtime_disable(device); +} + +/* Set up chip specific power management-related functions */ +void intel_init_pm(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (HAS_FBC(dev)) { + if (INTEL_INFO(dev)->gen >= 7) { + dev_priv->display.fbc_enabled = ironlake_fbc_enabled; + dev_priv->display.enable_fbc = gen7_enable_fbc; + dev_priv->display.disable_fbc = ironlake_disable_fbc; + } else if (INTEL_INFO(dev)->gen >= 5) { + dev_priv->display.fbc_enabled = ironlake_fbc_enabled; + dev_priv->display.enable_fbc = ironlake_enable_fbc; + dev_priv->display.disable_fbc = ironlake_disable_fbc; + } else if (IS_GM45(dev)) { + dev_priv->display.fbc_enabled = g4x_fbc_enabled; + dev_priv->display.enable_fbc = g4x_enable_fbc; + dev_priv->display.disable_fbc = g4x_disable_fbc; + } else { + dev_priv->display.fbc_enabled = i8xx_fbc_enabled; + dev_priv->display.enable_fbc = i8xx_enable_fbc; + dev_priv->display.disable_fbc = i8xx_disable_fbc; + + /* This value was pulled out of someone's hat */ + I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT); + } + } + + /* For cxsr */ + if (IS_PINEVIEW(dev)) + i915_pineview_get_mem_freq(dev); + else if (IS_GEN5(dev)) + i915_ironlake_get_mem_freq(dev); + + /* For FIFO watermark updates */ + if (HAS_PCH_SPLIT(dev)) { + ilk_setup_wm_latency(dev); + + if ((IS_GEN5(dev) && dev_priv->wm.pri_latency[1] && + dev_priv->wm.spr_latency[1] && dev_priv->wm.cur_latency[1]) || + (!IS_GEN5(dev) && dev_priv->wm.pri_latency[0] && + dev_priv->wm.spr_latency[0] && dev_priv->wm.cur_latency[0])) { + dev_priv->display.update_wm = ilk_update_wm; + dev_priv->display.update_sprite_wm = ilk_update_sprite_wm; + } else { + DRM_DEBUG_KMS("Failed to read display plane latency. " + "Disable CxSR\n"); + } + + if (IS_GEN5(dev)) + dev_priv->display.init_clock_gating = ironlake_init_clock_gating; + else if (IS_GEN6(dev)) + dev_priv->display.init_clock_gating = gen6_init_clock_gating; + else if (IS_IVYBRIDGE(dev)) + dev_priv->display.init_clock_gating = ivybridge_init_clock_gating; + else if (IS_HASWELL(dev)) + dev_priv->display.init_clock_gating = haswell_init_clock_gating; + else if (INTEL_INFO(dev)->gen == 8) + dev_priv->display.init_clock_gating = gen8_init_clock_gating; + } else if (IS_CHERRYVIEW(dev)) { + dev_priv->display.update_wm = valleyview_update_wm; + dev_priv->display.init_clock_gating = + cherryview_init_clock_gating; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.update_wm = valleyview_update_wm; + dev_priv->display.init_clock_gating = + valleyview_init_clock_gating; + } else if (IS_PINEVIEW(dev)) { + if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev), + dev_priv->is_ddr3, + dev_priv->fsb_freq, + dev_priv->mem_freq)) { + DRM_INFO("failed to find known CxSR latency " + "(found ddr%s fsb freq %d, mem freq %d), " + "disabling CxSR\n", + (dev_priv->is_ddr3 == 1) ? "3" : "2", + dev_priv->fsb_freq, dev_priv->mem_freq); + /* Disable CxSR and never update its watermark again */ + pineview_disable_cxsr(dev); + dev_priv->display.update_wm = NULL; + } else + dev_priv->display.update_wm = pineview_update_wm; + dev_priv->display.init_clock_gating = gen3_init_clock_gating; + } else if (IS_G4X(dev)) { + dev_priv->display.update_wm = g4x_update_wm; + dev_priv->display.init_clock_gating = g4x_init_clock_gating; + } else if (IS_GEN4(dev)) { + dev_priv->display.update_wm = i965_update_wm; + if (IS_CRESTLINE(dev)) + dev_priv->display.init_clock_gating = crestline_init_clock_gating; + else if (IS_BROADWATER(dev)) + dev_priv->display.init_clock_gating = broadwater_init_clock_gating; + } else if (IS_GEN3(dev)) { + dev_priv->display.update_wm = i9xx_update_wm; + dev_priv->display.get_fifo_size = i9xx_get_fifo_size; + dev_priv->display.init_clock_gating = gen3_init_clock_gating; + } else if (IS_GEN2(dev)) { + if (INTEL_INFO(dev)->num_pipes == 1) { + dev_priv->display.update_wm = i845_update_wm; + dev_priv->display.get_fifo_size = i845_get_fifo_size; + } else { + dev_priv->display.update_wm = i9xx_update_wm; + dev_priv->display.get_fifo_size = i830_get_fifo_size; + } + + if (IS_I85X(dev) || IS_I865G(dev)) + dev_priv->display.init_clock_gating = i85x_init_clock_gating; + else + dev_priv->display.init_clock_gating = i830_init_clock_gating; + } else { + DRM_ERROR("unexpected fall-through in intel_init_pm\n"); + } +} + +int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val) +{ + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + + if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { + DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n"); + return -EAGAIN; + } + + I915_WRITE(GEN6_PCODE_DATA, *val); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); + + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) { + DRM_ERROR("timeout waiting for pcode read (%d) to finish\n", mbox); + return -ETIMEDOUT; + } + + *val = I915_READ(GEN6_PCODE_DATA); + I915_WRITE(GEN6_PCODE_DATA, 0); + + return 0; +} + +int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val) +{ + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); + + if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { + DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n"); + return -EAGAIN; + } + + I915_WRITE(GEN6_PCODE_DATA, val); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); + + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) { + DRM_ERROR("timeout waiting for pcode write (%d) to finish\n", mbox); + return -ETIMEDOUT; + } + + I915_WRITE(GEN6_PCODE_DATA, 0); + + return 0; +} + +int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val) +{ + int div; + + /* 4 x czclk */ + switch (dev_priv->mem_freq) { + case 800: + div = 10; + break; + case 1066: + div = 12; + break; + case 1333: + div = 16; + break; + default: + return -1; + } + + return DIV_ROUND_CLOSEST(dev_priv->mem_freq * (val + 6 - 0xbd), 4 * div); +} + +int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val) +{ + int mul; + + /* 4 x czclk */ + switch (dev_priv->mem_freq) { + case 800: + mul = 10; + break; + case 1066: + mul = 12; + break; + case 1333: + mul = 16; + break; + default: + return -1; + } + + return DIV_ROUND_CLOSEST(4 * mul * val, dev_priv->mem_freq) + 0xbd - 6; +} + +void intel_pm_setup(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_init(&dev_priv->rps.hw_lock); + + INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, + intel_gen6_powersave_work); + + dev_priv->pm.suspended = false; + dev_priv->pm.irqs_disabled = false; +} |