diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 4719 |
1 files changed, 3626 insertions, 1093 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c8e00555331..8a1a4fbc06a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -27,39 +27,61 @@ #include <linux/i2c.h> #include <linux/slab.h> -#include "drmP.h" -#include "drm.h" -#include "drm_crtc.h" -#include "drm_crtc_helper.h" +#include <linux/export.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> #include "intel_drv.h" -#include "i915_drm.h" +#include <drm/i915_drm.h> #include "i915_drv.h" -#include "drm_dp_helper.h" - -#define DP_LINK_STATUS_SIZE 6 #define DP_LINK_CHECK_TIMEOUT (10 * 1000) -#define DP_LINK_CONFIGURATION_SIZE 9 - -struct intel_dp { - struct intel_encoder base; - uint32_t output_reg; - uint32_t DP; - uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; - bool has_audio; - int force_audio; - int dpms_mode; - uint8_t link_bw; - uint8_t lane_count; - uint8_t dpcd[4]; - struct i2c_adapter adapter; - struct i2c_algo_dp_aux_data algo; - bool is_pch_edp; - uint8_t train_set[4]; - uint8_t link_status[DP_LINK_STATUS_SIZE]; - - struct drm_property *force_audio_property; +struct dp_link_dpll { + int link_bw; + struct dpll dpll; +}; + +static const struct dp_link_dpll gen4_dpll[] = { + { DP_LINK_BW_1_62, + { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } }, + { DP_LINK_BW_2_7, + { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } } +}; + +static const struct dp_link_dpll pch_dpll[] = { + { DP_LINK_BW_1_62, + { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } }, + { DP_LINK_BW_2_7, + { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } } +}; + +static const struct dp_link_dpll vlv_dpll[] = { + { DP_LINK_BW_1_62, + { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } }, + { DP_LINK_BW_2_7, + { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } } +}; + +/* + * CHV supports eDP 1.4 that have more link rates. + * Below only provides the fixed rate but exclude variable rate. + */ +static const struct dp_link_dpll chv_dpll[] = { + /* + * CHV requires to program fractional division for m2. + * m2 is stored in fixed point format using formula below + * (m2_int << 22) | m2_fraction + */ + { DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */ + { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, + { DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */ + { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, + { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */ + { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } }; /** @@ -71,121 +93,91 @@ struct intel_dp { */ static bool is_edp(struct intel_dp *intel_dp) { - return intel_dp->base.type == INTEL_OUTPUT_EDP; -} + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); -/** - * is_pch_edp - is the port on the PCH and attached to an eDP panel? - * @intel_dp: DP struct - * - * Returns true if the given DP struct corresponds to a PCH DP port attached - * to an eDP panel, false otherwise. Helpful for determining whether we - * may need FDI resources for a given DP output or not. - */ -static bool is_pch_edp(struct intel_dp *intel_dp) -{ - return intel_dp->is_pch_edp; + return intel_dig_port->base.type == INTEL_OUTPUT_EDP; } -static struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder) +static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp) { - return container_of(encoder, struct intel_dp, base.base); -} + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); -static struct intel_dp *intel_attached_dp(struct drm_connector *connector) -{ - return container_of(intel_attached_encoder(connector), - struct intel_dp, base); + return intel_dig_port->base.base.dev; } -/** - * intel_encoder_is_pch_edp - is the given encoder a PCH attached eDP? - * @encoder: DRM encoder - * - * Return true if @encoder corresponds to a PCH attached eDP panel. Needed - * by intel_display.c. - */ -bool intel_encoder_is_pch_edp(struct drm_encoder *encoder) +static struct intel_dp *intel_attached_dp(struct drm_connector *connector) { - struct intel_dp *intel_dp; - - if (!encoder) - return false; - - intel_dp = enc_to_intel_dp(encoder); - - return is_pch_edp(intel_dp); + return enc_to_intel_dp(&intel_attached_encoder(connector)->base); } -static void intel_dp_start_link_train(struct intel_dp *intel_dp); -static void intel_dp_complete_link_train(struct intel_dp *intel_dp); static void intel_dp_link_down(struct intel_dp *intel_dp); - -void -intel_edp_link_config (struct intel_encoder *intel_encoder, - int *lane_num, int *link_bw) -{ - struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base); - - *lane_num = intel_dp->lane_count; - if (intel_dp->link_bw == DP_LINK_BW_1_62) - *link_bw = 162000; - else if (intel_dp->link_bw == DP_LINK_BW_2_7) - *link_bw = 270000; -} - -static int -intel_dp_max_lane_count(struct intel_dp *intel_dp) -{ - int max_lane_count = 4; - - if (intel_dp->dpcd[0] >= 0x11) { - max_lane_count = intel_dp->dpcd[2] & 0x1f; - switch (max_lane_count) { - case 1: case 2: case 4: - break; - default: - max_lane_count = 4; - } - } - return max_lane_count; -} +static bool _edp_panel_vdd_on(struct intel_dp *intel_dp); +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync); static int intel_dp_max_link_bw(struct intel_dp *intel_dp) { - int max_link_bw = intel_dp->dpcd[1]; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; + struct drm_device *dev = intel_dp->attached_connector->base.dev; switch (max_link_bw) { case DP_LINK_BW_1_62: case DP_LINK_BW_2_7: break; + case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */ + if (((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || + INTEL_INFO(dev)->gen >= 8) && + intel_dp->dpcd[DP_DPCD_REV] >= 0x12) + max_link_bw = DP_LINK_BW_5_4; + else + max_link_bw = DP_LINK_BW_2_7; + break; default: + WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n", + max_link_bw); max_link_bw = DP_LINK_BW_1_62; break; } return max_link_bw; } -static int -intel_dp_link_clock(uint8_t link_bw) +static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp) { - if (link_bw == DP_LINK_BW_2_7) - return 270000; - else - return 162000; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + u8 source_max, sink_max; + + source_max = 4; + if (HAS_DDI(dev) && intel_dig_port->port == PORT_A && + (intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0) + source_max = 2; + + sink_max = drm_dp_max_lane_count(intel_dp->dpcd); + + return min(source_max, sink_max); } -/* I think this is a fiction */ +/* + * The units on the numbers in the next two are... bizarre. Examples will + * make it clearer; this one parallels an example in the eDP spec. + * + * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as: + * + * 270000 * 1 * 8 / 10 == 216000 + * + * The actual data capacity of that configuration is 2.16Gbit/s, so the + * units are decakilobits. ->clock in a drm_display_mode is in kilohertz - + * or equivalently, kilopixels per second - so for 1680x1050R it'd be + * 119000. At 18bpp that's 2142000 kilobits per second. + * + * Thus the strange-looking division by 10 in intel_dp_link_required, to + * get the result in decakilobits instead of kilobits. + */ + static int -intel_dp_link_required(struct drm_device *dev, struct intel_dp *intel_dp, int pixel_clock) +intel_dp_link_required(int pixel_clock, int bpp) { - struct drm_i915_private *dev_priv = dev->dev_private; - - if (is_edp(intel_dp)) - return (pixel_clock * dev_priv->edp.bpp + 7) / 8; - else - return pixel_clock * 3; + return (pixel_clock * bpp + 9) / 10; } static int @@ -194,34 +186,41 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes) return (max_link_clock * max_lanes * 8) / 10; } -static int +static enum drm_mode_status intel_dp_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct intel_dp *intel_dp = intel_attached_dp(connector); - struct drm_device *dev = connector->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); - int max_lanes = intel_dp_max_lane_count(intel_dp); + struct intel_connector *intel_connector = to_intel_connector(connector); + struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; + int target_clock = mode->clock; + int max_rate, mode_rate, max_lanes, max_link_clock; - if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) { - if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay) + if (is_edp(intel_dp) && fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) return MODE_PANEL; - if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay) + if (mode->vdisplay > fixed_mode->vdisplay) return MODE_PANEL; + + target_clock = fixed_mode->clock; } - /* only refuse the mode on non eDP since we have seen some wierd eDP panels - which are outside spec tolerances but somehow work by magic */ - if (!is_edp(intel_dp) && - (intel_dp_link_required(connector->dev, intel_dp, mode->clock) - > intel_dp_max_data_rate(max_link_clock, max_lanes))) + max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp)); + max_lanes = intel_dp_max_lane_count(intel_dp); + + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + mode_rate = intel_dp_link_required(target_clock, 18); + + if (mode_rate > max_rate) return MODE_CLOCK_HIGH; if (mode->clock < 10000) return MODE_CLOCK_LOW; + if (mode->flags & DRM_MODE_FLAG_DBLCLK) + return MODE_H_ILLEGAL; + return MODE_OK; } @@ -255,6 +254,10 @@ intel_hrawclk(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; uint32_t clkcfg; + /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */ + if (IS_VALLEYVIEW(dev)) + return 200; + clkcfg = I915_READ(CLKCFG); switch (clkcfg & CLKCFG_FSB_MASK) { case CLKCFG_FSB_400: @@ -278,87 +281,332 @@ intel_hrawclk(struct drm_device *dev) } } -static int -intel_dp_aux_ch(struct intel_dp *intel_dp, - uint8_t *send, int send_bytes, - uint8_t *recv, int recv_size) +static void +intel_dp_init_panel_power_sequencer(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *out); +static void +intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *out); + +static enum pipe +vlv_power_sequencer_pipe(struct intel_dp *intel_dp) { - uint32_t output_reg = intel_dp->output_reg; - struct drm_device *dev = intel_dp->base.base.dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_crtc *crtc = intel_dig_port->base.base.crtc; + struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t ch_ctl = output_reg + 0x10; - uint32_t ch_data = ch_ctl + 4; - int i; - int recv_bytes; + enum port port = intel_dig_port->port; + enum pipe pipe; + + /* modeset should have pipe */ + if (crtc) + return to_intel_crtc(crtc)->pipe; + + /* init time, try to find a pipe with this port selected */ + for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) { + u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) & + PANEL_PORT_SELECT_MASK; + if (port_sel == PANEL_PORT_SELECT_DPB_VLV && port == PORT_B) + return pipe; + if (port_sel == PANEL_PORT_SELECT_DPC_VLV && port == PORT_C) + return pipe; + } + + /* shrug */ + return PIPE_A; +} + +static u32 _pp_ctrl_reg(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + + if (HAS_PCH_SPLIT(dev)) + return PCH_PP_CONTROL; + else + return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp)); +} + +static u32 _pp_stat_reg(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + + if (HAS_PCH_SPLIT(dev)) + return PCH_PP_STATUS; + else + return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); +} + +/* Reboot notifier handler to shutdown panel power to guarantee T12 timing + This function only applicable when panel PM state is not to be tracked */ +static int edp_notify_handler(struct notifier_block *this, unsigned long code, + void *unused) +{ + struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp), + edp_notifier); + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_div; + u32 pp_ctrl_reg, pp_div_reg; + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + + if (!is_edp(intel_dp) || code != SYS_RESTART) + return 0; + + if (IS_VALLEYVIEW(dev)) { + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); + pp_div = I915_READ(pp_div_reg); + pp_div &= PP_REFERENCE_DIVIDER_MASK; + + /* 0x1F write to PP_DIV_REG sets max cycle delay */ + I915_WRITE(pp_div_reg, pp_div | 0x1F); + I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF); + msleep(intel_dp->panel_power_cycle_delay); + } + + return 0; +} + +static bool edp_have_panel_power(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + + return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0; +} + +static bool edp_have_panel_vdd(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + enum intel_display_power_domain power_domain; + + power_domain = intel_display_port_power_domain(intel_encoder); + return intel_display_power_enabled(dev_priv, power_domain) && + (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0; +} + +static void +intel_dp_check_edp(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!is_edp(intel_dp)) + return; + + if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) { + WARN(1, "eDP powered off while attempting aux channel communication.\n"); + DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n", + I915_READ(_pp_stat_reg(intel_dp)), + I915_READ(_pp_ctrl_reg(intel_dp))); + } +} + +static uint32_t +intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t status; - uint32_t aux_clock_divider; - int try, precharge; + bool done; - /* The clock divider is based off the hrawclk, - * and would like to run at 2MHz. So, take the - * hrawclk value and divide by 2 and use that - * - * Note that PCH attached eDP panels should use a 125MHz input - * clock divider. +#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) + if (has_aux_irq) + done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(10)); + else + done = wait_for_atomic(C, 10) == 0; + if (!done) + DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", + has_aux_irq); +#undef C + + return status; +} + +static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + + /* + * The clock divider is based off the hrawclk, and would like to run at + * 2MHz. So, take the hrawclk value and divide by 2 and use that */ - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) { - if (IS_GEN6(dev)) - aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */ + return index ? 0 : intel_hrawclk(dev) / 2; +} + +static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + + if (index) + return 0; + + if (intel_dig_port->port == PORT_A) { + if (IS_GEN6(dev) || IS_GEN7(dev)) + return 200; /* SNB & IVB eDP input clock at 400Mhz */ else - aux_clock_divider = 225; /* eDP input clock at 450Mhz */ - } else if (HAS_PCH_SPLIT(dev)) - aux_clock_divider = 62; /* IRL input clock fixed at 125Mhz */ - else - aux_clock_divider = intel_hrawclk(dev) / 2; + return 225; /* eDP input clock at 450Mhz */ + } else { + return DIV_ROUND_UP(intel_pch_rawclk(dev), 2); + } +} + +static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (intel_dig_port->port == PORT_A) { + if (index) + return 0; + return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000); + } else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { + /* Workaround for non-ULT HSW */ + switch (index) { + case 0: return 63; + case 1: return 72; + default: return 0; + } + } else { + return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2); + } +} + +static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + return index ? 0 : 100; +} + +static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp, + bool has_aux_irq, + int send_bytes, + uint32_t aux_clock_divider) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + uint32_t precharge, timeout; if (IS_GEN6(dev)) precharge = 3; else precharge = 5; - if (I915_READ(ch_ctl) & DP_AUX_CH_CTL_SEND_BUSY) { - DRM_ERROR("dp_aux_ch not started status 0x%08x\n", - I915_READ(ch_ctl)); - return -EBUSY; - } - - /* Must try at least 3 times according to DP spec */ - for (try = 0; try < 5; try++) { - /* Load the send data into the aux channel data registers */ - for (i = 0; i < send_bytes; i += 4) - I915_WRITE(ch_data + i, - pack_aux(send + i, send_bytes - i)); - - /* Send the command and wait for it to complete */ - I915_WRITE(ch_ctl, - DP_AUX_CH_CTL_SEND_BUSY | - DP_AUX_CH_CTL_TIME_OUT_400us | - (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | - (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR); - for (;;) { - status = I915_READ(ch_ctl); - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + if (IS_BROADWELL(dev) && intel_dp->aux_ch_ctl_reg == DPA_AUX_CH_CTL) + timeout = DP_AUX_CH_CTL_TIME_OUT_600us; + else + timeout = DP_AUX_CH_CTL_TIME_OUT_400us; + + return DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_DONE | + (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + timeout | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT); +} + +static int +intel_dp_aux_ch(struct intel_dp *intel_dp, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; + uint32_t ch_data = ch_ctl + 4; + uint32_t aux_clock_divider; + int i, ret, recv_bytes; + uint32_t status; + int try, clock = 0; + bool has_aux_irq = HAS_AUX_IRQ(dev); + bool vdd; + + vdd = _edp_panel_vdd_on(intel_dp); + + /* dp aux is extremely sensitive to irq latency, hence request the + * lowest possible wakeup latency and so prevent the cpu from going into + * deep sleep states. + */ + pm_qos_update_request(&dev_priv->pm_qos, 0); + + intel_dp_check_edp(intel_dp); + + intel_aux_display_runtime_get(dev_priv); + + /* Try to wait for any previous AUX channel activity */ + for (try = 0; try < 3; try++) { + status = I915_READ_NOTRACE(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + msleep(1); + } + + if (try == 3) { + WARN(1, "dp_aux_ch not started status 0x%08x\n", + I915_READ(ch_ctl)); + ret = -EBUSY; + goto out; + } + + /* Only 5 data registers! */ + if (WARN_ON(send_bytes > 20 || recv_size > 20)) { + ret = -E2BIG; + goto out; + } + + while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) { + u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, + has_aux_irq, + send_bytes, + aux_clock_divider); + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) + I915_WRITE(ch_data + i, + pack_aux(send + i, send_bytes - i)); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, send_ctl); + + status = intel_dp_aux_wait_done(intel_dp, has_aux_irq); + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, + status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)) + continue; + if (status & DP_AUX_CH_CTL_DONE) break; - udelay(100); } - - /* Clear done status and any errors */ - I915_WRITE(ch_ctl, - status | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR); if (status & DP_AUX_CH_CTL_DONE) break; } if ((status & DP_AUX_CH_CTL_DONE) == 0) { DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); - return -EBUSY; + ret = -EBUSY; + goto out; } /* Check for timeout or receive error. @@ -366,14 +614,16 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, */ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); - return -EIO; + ret = -EIO; + goto out; } /* Timeouts occur when the device isn't connected, so they're * "normal" -- don't fill the kernel log with these */ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); - return -ETIMEDOUT; + ret = -ETIMEDOUT; + goto out; } /* Unload any bytes sent back from the other side */ @@ -381,486 +631,759 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); if (recv_bytes > recv_size) recv_bytes = recv_size; - + for (i = 0; i < recv_bytes; i += 4) unpack_aux(I915_READ(ch_data + i), recv + i, recv_bytes - i); - return recv_bytes; + ret = recv_bytes; +out: + pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); + intel_aux_display_runtime_put(dev_priv); + + if (vdd) + edp_panel_vdd_off(intel_dp, false); + + return ret; } -/* Write data to the aux channel in native mode */ -static int -intel_dp_aux_native_write(struct intel_dp *intel_dp, - uint16_t address, uint8_t *send, int send_bytes) +#define BARE_ADDRESS_SIZE 3 +#define HEADER_SIZE (BARE_ADDRESS_SIZE + 1) +static ssize_t +intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) { + struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux); + uint8_t txbuf[20], rxbuf[20]; + size_t txsize, rxsize; int ret; - uint8_t msg[20]; - int msg_bytes; - uint8_t ack; - - if (send_bytes > 16) - return -1; - msg[0] = AUX_NATIVE_WRITE << 4; - msg[1] = address >> 8; - msg[2] = address & 0xff; - msg[3] = send_bytes - 1; - memcpy(&msg[4], send, send_bytes); - msg_bytes = send_bytes + 4; - for (;;) { - ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1); - if (ret < 0) - return ret; - if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) - break; - else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) - udelay(100); - else - return -EIO; - } - return send_bytes; -} -/* Write a single byte to the aux channel in native mode */ -static int -intel_dp_aux_native_write_1(struct intel_dp *intel_dp, - uint16_t address, uint8_t byte) -{ - return intel_dp_aux_native_write(intel_dp, address, &byte, 1); -} + txbuf[0] = msg->request << 4; + txbuf[1] = msg->address >> 8; + txbuf[2] = msg->address & 0xff; + txbuf[3] = msg->size - 1; -/* read bytes from a native aux channel */ -static int -intel_dp_aux_native_read(struct intel_dp *intel_dp, - uint16_t address, uint8_t *recv, int recv_bytes) -{ - uint8_t msg[4]; - int msg_bytes; - uint8_t reply[20]; - int reply_bytes; - uint8_t ack; - int ret; + switch (msg->request & ~DP_AUX_I2C_MOT) { + case DP_AUX_NATIVE_WRITE: + case DP_AUX_I2C_WRITE: + txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE; + rxsize = 1; - msg[0] = AUX_NATIVE_READ << 4; - msg[1] = address >> 8; - msg[2] = address & 0xff; - msg[3] = recv_bytes - 1; + if (WARN_ON(txsize > 20)) + return -E2BIG; - msg_bytes = 4; - reply_bytes = recv_bytes + 1; + memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size); - for (;;) { - ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, - reply, reply_bytes); - if (ret == 0) - return -EPROTO; - if (ret < 0) - return ret; - ack = reply[0]; - if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { - memcpy(recv, reply + 1, ret - 1); - return ret - 1; + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + + /* Return payload size. */ + ret = msg->size; } - else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) - udelay(100); - else - return -EIO; - } -} + break; -static int -intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, - uint8_t write_byte, uint8_t *read_byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - struct intel_dp *intel_dp = container_of(adapter, - struct intel_dp, - adapter); - uint16_t address = algo_data->address; - uint8_t msg[5]; - uint8_t reply[2]; - int msg_bytes; - int reply_bytes; - int ret; + case DP_AUX_NATIVE_READ: + case DP_AUX_I2C_READ: + txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE; + rxsize = msg->size + 1; + + if (WARN_ON(rxsize > 20)) + return -E2BIG; + + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + /* + * Assume happy day, and copy the data. The caller is + * expected to check msg->reply before touching it. + * + * Return payload size. + */ + ret--; + memcpy(msg->buffer, rxbuf + 1, ret); + } + break; - /* Set up the command byte */ - if (mode & MODE_I2C_READ) - msg[0] = AUX_I2C_READ << 4; - else - msg[0] = AUX_I2C_WRITE << 4; + default: + ret = -EINVAL; + break; + } - if (!(mode & MODE_I2C_STOP)) - msg[0] |= AUX_I2C_MOT << 4; + return ret; +} - msg[1] = address >> 8; - msg[2] = address; +static void +intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; + const char *name = NULL; + int ret; - switch (mode) { - case MODE_I2C_WRITE: - msg[3] = 0; - msg[4] = write_byte; - msg_bytes = 5; - reply_bytes = 1; + switch (port) { + case PORT_A: + intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL; + name = "DPDDC-A"; break; - case MODE_I2C_READ: - msg[3] = 0; - msg_bytes = 4; - reply_bytes = 2; + case PORT_B: + intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL; + name = "DPDDC-B"; break; - default: - msg_bytes = 3; - reply_bytes = 1; + case PORT_C: + intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL; + name = "DPDDC-C"; break; + case PORT_D: + intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL; + name = "DPDDC-D"; + break; + default: + BUG(); } - for (;;) { - ret = intel_dp_aux_ch(intel_dp, - msg, msg_bytes, - reply, reply_bytes); - if (ret < 0) { - DRM_DEBUG_KMS("aux_ch failed %d\n", ret); - return ret; - } - switch (reply[0] & AUX_I2C_REPLY_MASK) { - case AUX_I2C_REPLY_ACK: - if (mode == MODE_I2C_READ) { - *read_byte = reply[1]; + if (!HAS_DDI(dev)) + intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; + + intel_dp->aux.name = name; + intel_dp->aux.dev = dev->dev; + intel_dp->aux.transfer = intel_dp_aux_transfer; + + DRM_DEBUG_KMS("registering %s bus for %s\n", name, + connector->base.kdev->kobj.name); + + ret = drm_dp_aux_register(&intel_dp->aux); + if (ret < 0) { + DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n", + name, ret); + return; + } + + ret = sysfs_create_link(&connector->base.kdev->kobj, + &intel_dp->aux.ddc.dev.kobj, + intel_dp->aux.ddc.dev.kobj.name); + if (ret < 0) { + DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret); + drm_dp_aux_unregister(&intel_dp->aux); + } +} + +static void +intel_dp_connector_unregister(struct intel_connector *intel_connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base); + + sysfs_remove_link(&intel_connector->base.kdev->kobj, + intel_dp->aux.ddc.dev.kobj.name); + intel_connector_unregister(intel_connector); +} + +static void +intel_dp_set_clock(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config, int link_bw) +{ + struct drm_device *dev = encoder->base.dev; + const struct dp_link_dpll *divisor = NULL; + int i, count = 0; + + if (IS_G4X(dev)) { + divisor = gen4_dpll; + count = ARRAY_SIZE(gen4_dpll); + } else if (IS_HASWELL(dev)) { + /* Haswell has special-purpose DP DDI clocks. */ + } else if (HAS_PCH_SPLIT(dev)) { + divisor = pch_dpll; + count = ARRAY_SIZE(pch_dpll); + } else if (IS_CHERRYVIEW(dev)) { + divisor = chv_dpll; + count = ARRAY_SIZE(chv_dpll); + } else if (IS_VALLEYVIEW(dev)) { + divisor = vlv_dpll; + count = ARRAY_SIZE(vlv_dpll); + } + + if (divisor && count) { + for (i = 0; i < count; i++) { + if (link_bw == divisor[i].link_bw) { + pipe_config->dpll = divisor[i].dpll; + pipe_config->clock_set = true; + break; } - return reply_bytes - 1; - case AUX_I2C_REPLY_NACK: - DRM_DEBUG_KMS("aux_ch nack\n"); - return -EREMOTEIO; - case AUX_I2C_REPLY_DEFER: - DRM_DEBUG_KMS("aux_ch defer\n"); - udelay(100); - break; - default: - DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]); - return -EREMOTEIO; } } } -static int -intel_dp_i2c_init(struct intel_dp *intel_dp, - struct intel_connector *intel_connector, const char *name) +static void +intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n) { - DRM_DEBUG_KMS("i2c_init %s\n", name); - intel_dp->algo.running = false; - intel_dp->algo.address = 0; - intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch; - - memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter)); - intel_dp->adapter.owner = THIS_MODULE; - intel_dp->adapter.class = I2C_CLASS_DDC; - strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); - intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; - intel_dp->adapter.algo_data = &intel_dp->algo; - intel_dp->adapter.dev.parent = &intel_connector->base.kdev; + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder transcoder = crtc->config.cpu_transcoder; - return i2c_dp_aux_add_bus(&intel_dp->adapter); + I915_WRITE(PIPE_DATA_M2(transcoder), + TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n); + I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m); + I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n); } -static bool -intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +bool +intel_dp_compute_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *intel_crtc = encoder->new_crtc; + struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock; + int min_lane_count = 1; int max_lane_count = intel_dp_max_lane_count(intel_dp); - int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; - static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; - - if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) { - intel_fixed_panel_mode(dev_priv->panel_fixed_mode, adjusted_mode); - intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN, - mode, adjusted_mode); - /* - * the mode->clock is used to calculate the Data&Link M/N - * of the pipe. For the eDP the fixed clock should be used. - */ - mode->clock = dev_priv->panel_fixed_mode->clock; + /* Conveniently, the link BW constants become indices with a shift...*/ + int min_clock = 0; + int max_clock = intel_dp_max_link_bw(intel_dp) >> 3; + int bpp, mode_rate; + static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 }; + int link_avail, link_clock; + + if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A) + pipe_config->has_pch_encoder = true; + + pipe_config->has_dp_encoder = true; + pipe_config->has_audio = intel_dp->has_audio; + + if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { + intel_fixed_panel_mode(intel_connector->panel.fixed_mode, + adjusted_mode); + if (!HAS_PCH_SPLIT(dev)) + intel_gmch_panel_fitting(intel_crtc, pipe_config, + intel_connector->panel.fitting_mode); + else + intel_pch_panel_fitting(intel_crtc, pipe_config, + intel_connector->panel.fitting_mode); } - /* Just use VBT values for eDP */ + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) + return false; + + DRM_DEBUG_KMS("DP link computation with max lane count %i " + "max bw %02x pixel clock %iKHz\n", + max_lane_count, bws[max_clock], + adjusted_mode->crtc_clock); + + /* Walk through all bpp values. Luckily they're all nicely spaced with 2 + * bpc in between. */ + bpp = pipe_config->pipe_bpp; if (is_edp(intel_dp)) { - intel_dp->lane_count = dev_priv->edp.lanes; - intel_dp->link_bw = dev_priv->edp.rate; - adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); - DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n", - intel_dp->link_bw, intel_dp->lane_count, - adjusted_mode->clock); - return true; + if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) { + DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n", + dev_priv->vbt.edp_bpp); + bpp = dev_priv->vbt.edp_bpp; + } + + if (IS_BROADWELL(dev)) { + /* Yes, it's an ugly hack. */ + min_lane_count = max_lane_count; + DRM_DEBUG_KMS("forcing lane count to max (%u) on BDW\n", + min_lane_count); + } else if (dev_priv->vbt.edp_lanes) { + min_lane_count = min(dev_priv->vbt.edp_lanes, + max_lane_count); + DRM_DEBUG_KMS("using min %u lanes per VBT\n", + min_lane_count); + } + + if (dev_priv->vbt.edp_rate) { + min_clock = min(dev_priv->vbt.edp_rate >> 3, max_clock); + DRM_DEBUG_KMS("using min %02x link bw per VBT\n", + bws[min_clock]); + } } - for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { - for (clock = 0; clock <= max_clock; clock++) { - int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); + for (; bpp >= 6*3; bpp -= 2*3) { + mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, + bpp); - if (intel_dp_link_required(encoder->dev, intel_dp, mode->clock) - <= link_avail) { - intel_dp->link_bw = bws[clock]; - intel_dp->lane_count = lane_count; - adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); - DRM_DEBUG_KMS("Display port link bw %02x lane " - "count %d clock %d\n", - intel_dp->link_bw, intel_dp->lane_count, - adjusted_mode->clock); - return true; + for (clock = min_clock; clock <= max_clock; clock++) { + for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) { + link_clock = drm_dp_bw_code_to_link_rate(bws[clock]); + link_avail = intel_dp_max_data_rate(link_clock, + lane_count); + + if (mode_rate <= link_avail) { + goto found; + } } } } return false; -} -struct intel_dp_m_n { - uint32_t tu; - uint32_t gmch_m; - uint32_t gmch_n; - uint32_t link_m; - uint32_t link_n; -}; +found: + if (intel_dp->color_range_auto) { + /* + * See: + * CEA-861-E - 5.1 Default Encoding Parameters + * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry + */ + if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1) + intel_dp->color_range = DP_COLOR_RANGE_16_235; + else + intel_dp->color_range = 0; + } -static void -intel_reduce_ratio(uint32_t *num, uint32_t *den) -{ - while (*num > 0xffffff || *den > 0xffffff) { - *num >>= 1; - *den >>= 1; + if (intel_dp->color_range) + pipe_config->limited_color_range = true; + + intel_dp->link_bw = bws[clock]; + intel_dp->lane_count = lane_count; + pipe_config->pipe_bpp = bpp; + pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); + + DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n", + intel_dp->link_bw, intel_dp->lane_count, + pipe_config->port_clock, bpp); + DRM_DEBUG_KMS("DP link bw required %i available %i\n", + mode_rate, link_avail); + + intel_link_compute_m_n(bpp, lane_count, + adjusted_mode->crtc_clock, + pipe_config->port_clock, + &pipe_config->dp_m_n); + + if (intel_connector->panel.downclock_mode != NULL && + intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) { + intel_link_compute_m_n(bpp, lane_count, + intel_connector->panel.downclock_mode->clock, + pipe_config->port_clock, + &pipe_config->dp_m2_n2); } + + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); + + return true; } -static void -intel_dp_compute_m_n(int bpp, - int nlanes, - int pixel_clock, - int link_clock, - struct intel_dp_m_n *m_n) +static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp) { - m_n->tu = 64; - m_n->gmch_m = (pixel_clock * bpp) >> 3; - m_n->gmch_n = link_clock * nlanes; - intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - m_n->link_m = pixel_clock; - m_n->link_n = link_clock; - intel_reduce_ratio(&m_n->link_m, &m_n->link_n); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpa_ctl; + + DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", crtc->config.port_clock); + dpa_ctl = I915_READ(DP_A); + dpa_ctl &= ~DP_PLL_FREQ_MASK; + + if (crtc->config.port_clock == 162000) { + /* For a long time we've carried around a ILK-DevA w/a for the + * 160MHz clock. If we're really unlucky, it's still required. + */ + DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n"); + dpa_ctl |= DP_PLL_FREQ_160MHZ; + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + } else { + dpa_ctl |= DP_PLL_FREQ_270MHZ; + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + + I915_WRITE(DP_A, dpa_ctl); + + POSTING_READ(DP_A); + udelay(500); } -void -intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +static void intel_dp_prepare(struct intel_encoder *encoder) { - struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_encoder *encoder; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int lane_count = 4, bpp = 24; - struct intel_dp_m_n m_n; + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode; /* - * Find the lane count in the intel_encoder private + * There are four kinds of DP registers: + * + * IBX PCH + * SNB CPU + * IVB CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable */ - list_for_each_entry(encoder, &mode_config->encoder_list, head) { - struct intel_dp *intel_dp; - if (encoder->crtc != crtc) - continue; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; - intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { - lane_count = intel_dp->lane_count; - break; - } else if (is_edp(intel_dp)) { - lane_count = dev_priv->edp.lanes; - bpp = dev_priv->edp.bpp; - break; - } + /* Handle DP bits in common between all three register formats */ + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count); + + if (crtc->config.has_audio) { + DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", + pipe_name(crtc->pipe)); + intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; + intel_write_eld(&encoder->base, adjusted_mode); } - /* - * Compute the GMCH and Link ratios. The '3' here is - * the number of bytes_per_pixel post-LUT, which we always - * set up for 8-bits of R/G/B, or 3 bytes total. - */ - intel_dp_compute_m_n(bpp, lane_count, - mode->clock, adjusted_mode->clock, &m_n); + /* Split out the IBX/CPU vs CPT settings */ - if (HAS_PCH_SPLIT(dev)) { - if (intel_crtc->pipe == 0) { - I915_WRITE(TRANSA_DATA_M1, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n); - I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m); - I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n); + if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + intel_dp->DP |= crtc->pipe << 29; + } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { + if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev)) + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (!IS_CHERRYVIEW(dev)) { + if (crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; } else { - I915_WRITE(TRANSB_DATA_M1, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n); - I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m); - I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n); + intel_dp->DP |= DP_PIPE_SELECT_CHV(crtc->pipe); } } else { - if (intel_crtc->pipe == 0) { - I915_WRITE(PIPEA_GMCH_DATA_M, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(PIPEA_GMCH_DATA_N, - m_n.gmch_n); - I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); - I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); - } else { - I915_WRITE(PIPEB_GMCH_DATA_M, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(PIPEB_GMCH_DATA_N, - m_n.gmch_n); - I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); - I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); - } + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } -static void -intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_crtc *crtc = intel_dp->base.base.crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); +#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) - intel_dp->DP = (DP_VOLTAGE_0_4 | - DP_PRE_EMPHASIS_0); +#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0) +#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0) - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; +#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; +static void wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_stat_reg, pp_ctrl_reg; - switch (intel_dp->lane_count) { - case 1: - intel_dp->DP |= DP_PORT_WIDTH_1; - break; - case 2: - intel_dp->DP |= DP_PORT_WIDTH_2; - break; - case 4: - intel_dp->DP |= DP_PORT_WIDTH_4; - break; + pp_stat_reg = _pp_stat_reg(intel_dp); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", + mask, value, + I915_READ(pp_stat_reg), + I915_READ(pp_ctrl_reg)); + + if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) { + DRM_ERROR("Panel status timeout: status %08x control %08x\n", + I915_READ(pp_stat_reg), + I915_READ(pp_ctrl_reg)); } - if (intel_dp->has_audio) - intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); - intel_dp->link_configuration[0] = intel_dp->link_bw; - intel_dp->link_configuration[1] = intel_dp->lane_count; + DRM_DEBUG_KMS("Wait complete\n"); +} + +static void wait_panel_on(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power on\n"); + wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); +} + +static void wait_panel_off(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power off time\n"); + wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power cycle\n"); + + /* When we disable the VDD override bit last we have to do the manual + * wait. */ + wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle, + intel_dp->panel_power_cycle_delay); + + wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + +static void wait_backlight_on(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_power_on, + intel_dp->backlight_on_delay); +} +static void edp_wait_backlight_off(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off, + intel_dp->backlight_off_delay); +} + +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + u32 control; + + control = I915_READ(_pp_ctrl_reg(intel_dp)); + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + +static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; + u32 pp; + u32 pp_stat_reg, pp_ctrl_reg; + bool need_to_disable = !intel_dp->want_panel_vdd; + + if (!is_edp(intel_dp)) + return false; + + intel_dp->want_panel_vdd = true; + + if (edp_have_panel_vdd(intel_dp)) + return need_to_disable; + + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + + DRM_DEBUG_KMS("Turning eDP VDD on\n"); + + if (!edp_have_panel_power(intel_dp)) + wait_panel_power_cycle(intel_dp); + + pp = ironlake_get_pp_control(intel_dp); + pp |= EDP_FORCE_VDD; + + pp_stat_reg = _pp_stat_reg(intel_dp); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", + I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); /* - * Check for DPCD version > 1.1 and enhanced framing support + * If the panel wasn't on, delay before accessing aux channel */ - if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) { - intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; + if (!edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP was not running\n"); + msleep(intel_dp->panel_power_up_delay); } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + return need_to_disable; +} - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; +void intel_edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + if (is_edp(intel_dp)) { + bool vdd = _edp_panel_vdd_on(intel_dp); + + WARN(!vdd, "eDP VDD already requested on\n"); } } -/* Returns true if the panel was already on when called */ -static bool ironlake_edp_panel_on (struct intel_dp *intel_dp) +static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp->base.base.dev; + struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; + u32 pp; + u32 pp_stat_reg, pp_ctrl_reg; - if (I915_READ(PCH_PP_STATUS) & PP_ON) - return true; + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); - pp = I915_READ(PCH_PP_CONTROL); + if (!intel_dp->want_panel_vdd && edp_have_panel_vdd(intel_dp)) { + struct intel_digital_port *intel_dig_port = + dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + enum intel_display_power_domain power_domain; - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + DRM_DEBUG_KMS("Turning eDP VDD off\n"); - pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + pp = ironlake_get_pp_control(intel_dp); + pp &= ~EDP_FORCE_VDD; - /* Ouch. We need to wait here for some panels, like Dell e6510 - * https://bugs.freedesktop.org/show_bug.cgi?id=29278i - */ - msleep(300); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + pp_stat_reg = _pp_stat_reg(intel_dp); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, - 5000)) - DRM_ERROR("panel on wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + /* Make sure sequencer is idle before allowing subsequent activity */ + DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", + I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); - return false; + if ((pp & POWER_TARGET_ON) == 0) + intel_dp->last_power_cycle = jiffies; + + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); + } +} + +static void edp_panel_vdd_work(struct work_struct *__work) +{ + struct intel_dp *intel_dp = container_of(to_delayed_work(__work), + struct intel_dp, panel_vdd_work); + struct drm_device *dev = intel_dp_to_dev(intel_dp); + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + edp_panel_vdd_off_sync(intel_dp); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } -static void ironlake_edp_panel_off (struct drm_device *dev) +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) { + if (!is_edp(intel_dp)) + return; + + WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); + + intel_dp->want_panel_vdd = false; + + if (sync) { + edp_panel_vdd_off_sync(intel_dp); + } else { + /* + * Queue the timer to fire a long + * time from now (relative to the power down delay) + * to keep the panel power up across a sequence of operations + */ + schedule_delayed_work(&intel_dp->panel_vdd_work, + msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5)); + } +} + +void intel_edp_panel_on(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK | - PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK; + u32 pp; + u32 pp_ctrl_reg; - pp = I915_READ(PCH_PP_CONTROL); + if (!is_edp(intel_dp)) + return; - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + DRM_DEBUG_KMS("Turn eDP power on\n"); - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + if (edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP power already on\n"); + return; + } - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000)) - DRM_ERROR("panel off wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + wait_panel_power_cycle(intel_dp); - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + pp = ironlake_get_pp_control(intel_dp); + if (IS_GEN5(dev)) { + /* ILK workaround: disable reset around power sequence */ + pp &= ~PANEL_POWER_RESET; + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + } - /* Ouch. We need to wait here for some panels, like Dell e6510 - * https://bugs.freedesktop.org/show_bug.cgi?id=29278i - */ - msleep(300); + pp |= POWER_TARGET_ON; + if (!IS_GEN5(dev)) + pp |= PANEL_POWER_RESET; + + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + + wait_panel_on(intel_dp); + intel_dp->last_power_on = jiffies; + + if (IS_GEN5(dev)) { + pp |= PANEL_POWER_RESET; /* restore panel reset bit */ + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + } } -static void ironlake_edp_backlight_on (struct drm_device *dev) +void intel_edp_panel_off(struct intel_dp *intel_dp) { + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; u32 pp; + u32 pp_ctrl_reg; + + if (!is_edp(intel_dp)) + return; + + DRM_DEBUG_KMS("Turn eDP power off\n"); + + edp_wait_backlight_off(intel_dp); + + WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); + + pp = ironlake_get_pp_control(intel_dp); + /* We need to switch off panel power _and_ force vdd, for otherwise some + * panels get very unhappy and cease to work. */ + pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_FORCE_VDD | + EDP_BLC_ENABLE); + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + intel_dp->want_panel_vdd = false; + + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + + intel_dp->last_power_cycle = jiffies; + wait_panel_off(intel_dp); + + /* We got a reference when we enabled the VDD. */ + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); +} + +void intel_edp_backlight_on(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp; + u32 pp_ctrl_reg; + + if (!is_edp(intel_dp)) + return; DRM_DEBUG_KMS("\n"); /* @@ -869,206 +1392,1163 @@ static void ironlake_edp_backlight_on (struct drm_device *dev) * link. So delay a bit to make sure the image is solid before * allowing it to appear. */ - msleep(300); - pp = I915_READ(PCH_PP_CONTROL); + wait_backlight_on(intel_dp); + pp = ironlake_get_pp_control(intel_dp); pp |= EDP_BLC_ENABLE; - I915_WRITE(PCH_PP_CONTROL, pp); + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + + intel_panel_enable_backlight(intel_dp->attached_connector); } -static void ironlake_edp_backlight_off (struct drm_device *dev) +void intel_edp_backlight_off(struct intel_dp *intel_dp) { + struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; u32 pp; + u32 pp_ctrl_reg; + + if (!is_edp(intel_dp)) + return; + + intel_panel_disable_backlight(intel_dp->attached_connector); DRM_DEBUG_KMS("\n"); - pp = I915_READ(PCH_PP_CONTROL); + pp = ironlake_get_pp_control(intel_dp); pp &= ~EDP_BLC_ENABLE; - I915_WRITE(PCH_PP_CONTROL, pp); + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + I915_WRITE(pp_ctrl_reg, pp); + POSTING_READ(pp_ctrl_reg); + intel_dp->last_backlight_off = jiffies; } -static void ironlake_edp_pll_on(struct drm_encoder *encoder) +static void ironlake_edp_pll_on(struct intel_dp *intel_dp) { - struct drm_device *dev = encoder->dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_crtc *crtc = intel_dig_port->base.base.crtc; + struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; + assert_pipe_disabled(dev_priv, + to_intel_crtc(crtc)->pipe); + DRM_DEBUG_KMS("\n"); dpa_ctl = I915_READ(DP_A); - dpa_ctl |= DP_PLL_ENABLE; - I915_WRITE(DP_A, dpa_ctl); + WARN(dpa_ctl & DP_PLL_ENABLE, "dp pll on, should be off\n"); + WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n"); + + /* We don't adjust intel_dp->DP while tearing down the link, to + * facilitate link retraining (e.g. after hotplug). Hence clear all + * enable bits here to ensure that we don't enable too much. */ + intel_dp->DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE); + intel_dp->DP |= DP_PLL_ENABLE; + I915_WRITE(DP_A, intel_dp->DP); POSTING_READ(DP_A); udelay(200); } -static void ironlake_edp_pll_off(struct drm_encoder *encoder) +static void ironlake_edp_pll_off(struct intel_dp *intel_dp) { - struct drm_device *dev = encoder->dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_crtc *crtc = intel_dig_port->base.base.crtc; + struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; + assert_pipe_disabled(dev_priv, + to_intel_crtc(crtc)->pipe); + dpa_ctl = I915_READ(DP_A); + WARN((dpa_ctl & DP_PLL_ENABLE) == 0, + "dp pll off, should be on\n"); + WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n"); + + /* We can't rely on the value tracked for the DP register in + * intel_dp->DP because link_down must not change that (otherwise link + * re-training will fail. */ dpa_ctl &= ~DP_PLL_ENABLE; I915_WRITE(DP_A, dpa_ctl); POSTING_READ(DP_A); udelay(200); } -static void intel_dp_prepare(struct drm_encoder *encoder) +/* If the sink supports it, try to set the power state appropriately */ +void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + int ret, i; - if (is_edp(intel_dp)) { - ironlake_edp_backlight_off(dev); - ironlake_edp_panel_on(intel_dp); - if (!is_pch_edp(intel_dp)) - ironlake_edp_pll_on(encoder); - else - ironlake_edp_pll_off(encoder); + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + msleep(1); + } } - intel_dp_link_down(intel_dp); } -static void intel_dp_commit(struct drm_encoder *encoder) +static bool intel_dp_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; + u32 tmp; - intel_dp_start_link_train(intel_dp); + power_domain = intel_display_port_power_domain(encoder); + if (!intel_display_power_enabled(dev_priv, power_domain)) + return false; - if (is_edp(intel_dp)) - ironlake_edp_panel_on(intel_dp); + tmp = I915_READ(intel_dp->output_reg); - intel_dp_complete_link_train(intel_dp); + if (!(tmp & DP_PORT_EN)) + return false; + + if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { + *pipe = PORT_TO_PIPE_CPT(tmp); + } else if (IS_CHERRYVIEW(dev)) { + *pipe = DP_PORT_TO_PIPE_CHV(tmp); + } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { + *pipe = PORT_TO_PIPE(tmp); + } else { + u32 trans_sel; + u32 trans_dp; + int i; - if (is_edp(intel_dp)) - ironlake_edp_backlight_on(dev); + switch (intel_dp->output_reg) { + case PCH_DP_B: + trans_sel = TRANS_DP_PORT_SEL_B; + break; + case PCH_DP_C: + trans_sel = TRANS_DP_PORT_SEL_C; + break; + case PCH_DP_D: + trans_sel = TRANS_DP_PORT_SEL_D; + break; + default: + return true; + } + + for_each_pipe(i) { + trans_dp = I915_READ(TRANS_DP_CTL(i)); + if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) { + *pipe = i; + return true; + } + } + + DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", + intel_dp->output_reg); + } + + return true; } -static void -intel_dp_dpms(struct drm_encoder *encoder, int mode) +static void intel_dp_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + u32 tmp, flags = 0; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t dp_reg = I915_READ(intel_dp->output_reg); + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + int dotclock; - if (mode != DRM_MODE_DPMS_ON) { - if (is_edp(intel_dp)) - ironlake_edp_backlight_off(dev); - intel_dp_link_down(intel_dp); - if (is_edp(intel_dp)) - ironlake_edp_panel_off(dev); - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) - ironlake_edp_pll_off(encoder); + tmp = I915_READ(intel_dp->output_reg); + if (tmp & DP_AUDIO_OUTPUT_ENABLE) + pipe_config->has_audio = true; + + if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { + if (tmp & DP_SYNC_HS_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & DP_SYNC_VS_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; } else { - if (is_edp(intel_dp)) - ironlake_edp_panel_on(intel_dp); - if (!(dp_reg & DP_PORT_EN)) { - intel_dp_start_link_train(intel_dp); - intel_dp_complete_link_train(intel_dp); - } - if (is_edp(intel_dp)) - ironlake_edp_backlight_on(dev); + tmp = I915_READ(TRANS_DP_CTL(crtc->pipe)); + if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + } + + pipe_config->adjusted_mode.flags |= flags; + + pipe_config->has_dp_encoder = true; + + intel_dp_get_m_n(crtc, pipe_config); + + if (port == PORT_A) { + if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ) + pipe_config->port_clock = 162000; + else + pipe_config->port_clock = 270000; + } + + dotclock = intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->dp_m_n); + + if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A) + ironlake_check_encoder_dotclock(pipe_config, dotclock); + + pipe_config->adjusted_mode.crtc_clock = dotclock; + + if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); + dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; } - intel_dp->dpms_mode = mode; } -/* - * Fetch AUX CH registers 0x202 - 0x207 which contain - * link status information - */ -static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +static bool is_edp_psr(struct drm_device *dev) { - int ret; + struct drm_i915_private *dev_priv = dev->dev_private; - ret = intel_dp_aux_native_read(intel_dp, - DP_LANE0_1_STATUS, - intel_dp->link_status, DP_LINK_STATUS_SIZE); - if (ret != DP_LINK_STATUS_SIZE) + return dev_priv->psr.sink_support; +} + +static bool intel_edp_is_psr_enabled(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!HAS_PSR(dev)) + return false; + + return I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE; +} + +static void intel_edp_psr_write_vsc(struct intel_dp *intel_dp, + struct edp_vsc_psr *vsc_psr) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config.cpu_transcoder); + u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config.cpu_transcoder); + uint32_t *data = (uint32_t *) vsc_psr; + unsigned int i; + + /* As per BSPec (Pipe Video Data Island Packet), we need to disable + the video DIP being updated before program video DIP data buffer + registers for DIP being updated. */ + I915_WRITE(ctl_reg, 0); + POSTING_READ(ctl_reg); + + for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) { + if (i < sizeof(struct edp_vsc_psr)) + I915_WRITE(data_reg + i, *data++); + else + I915_WRITE(data_reg + i, 0); + } + + I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW); + POSTING_READ(ctl_reg); +} + +static void intel_edp_psr_setup(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct edp_vsc_psr psr_vsc; + + if (intel_dp->psr_setup_done) + return; + + /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */ + memset(&psr_vsc, 0, sizeof(psr_vsc)); + psr_vsc.sdp_header.HB0 = 0; + psr_vsc.sdp_header.HB1 = 0x7; + psr_vsc.sdp_header.HB2 = 0x2; + psr_vsc.sdp_header.HB3 = 0x8; + intel_edp_psr_write_vsc(intel_dp, &psr_vsc); + + /* Avoid continuous PSR exit by masking memup and hpd */ + I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP | + EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); + + intel_dp->psr_setup_done = true; +} + +static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t aux_clock_divider; + int precharge = 0x3; + int msg_size = 5; /* Header(4) + Message(1) */ + + aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0); + + /* Enable PSR in sink */ + if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE); + else + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE); + + /* Setup AUX registers */ + I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND); + I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION); + I915_WRITE(EDP_PSR_AUX_CTL(dev), + DP_AUX_CH_CTL_TIME_OUT_400us | + (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT)); +} + +static void intel_edp_psr_enable_source(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t max_sleep_time = 0x1f; + uint32_t idle_frames = 1; + uint32_t val = 0x0; + const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; + + if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) { + val |= EDP_PSR_LINK_STANDBY; + val |= EDP_PSR_TP2_TP3_TIME_0us; + val |= EDP_PSR_TP1_TIME_0us; + val |= EDP_PSR_SKIP_AUX_EXIT; + } else + val |= EDP_PSR_LINK_DISABLE; + + I915_WRITE(EDP_PSR_CTL(dev), val | + (IS_BROADWELL(dev) ? 0 : link_entry_time) | + max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | + idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | + EDP_PSR_ENABLE); +} + +static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = dig_port->base.base.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->primary->fb)->obj; + struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; + + dev_priv->psr.source_ok = false; + + if (!HAS_PSR(dev)) { + DRM_DEBUG_KMS("PSR not supported on this platform\n"); + return false; + } + + if ((intel_encoder->type != INTEL_OUTPUT_EDP) || + (dig_port->port != PORT_A)) { + DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n"); return false; + } + + if (!i915.enable_psr) { + DRM_DEBUG_KMS("PSR disable by flag\n"); + return false; + } + + crtc = dig_port->base.base.crtc; + if (crtc == NULL) { + DRM_DEBUG_KMS("crtc not active for PSR\n"); + return false; + } + + intel_crtc = to_intel_crtc(crtc); + if (!intel_crtc_active(crtc)) { + DRM_DEBUG_KMS("crtc not active for PSR\n"); + return false; + } + + obj = to_intel_framebuffer(crtc->primary->fb)->obj; + if (obj->tiling_mode != I915_TILING_X || + obj->fence_reg == I915_FENCE_REG_NONE) { + DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n"); + return false; + } + + if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) { + DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n"); + return false; + } + + if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) & + S3D_ENABLE) { + DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n"); + return false; + } + + if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { + DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n"); + return false; + } + + dev_priv->psr.source_ok = true; return true; } -static uint8_t -intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], - int r) +static void intel_edp_psr_do_enable(struct intel_dp *intel_dp) { - return link_status[r - DP_LANE0_1_STATUS]; + struct drm_device *dev = intel_dp_to_dev(intel_dp); + + if (!intel_edp_psr_match_conditions(intel_dp) || + intel_edp_is_psr_enabled(dev)) + return; + + /* Setup PSR once */ + intel_edp_psr_setup(intel_dp); + + /* Enable PSR on the panel */ + intel_edp_psr_enable_sink(intel_dp); + + /* Enable PSR on the host */ + intel_edp_psr_enable_source(intel_dp); } -static uint8_t -intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], - int lane) +void intel_edp_psr_enable(struct intel_dp *intel_dp) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); - int s = ((lane & 1) ? - DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : - DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + struct drm_device *dev = intel_dp_to_dev(intel_dp); - return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; + if (intel_edp_psr_match_conditions(intel_dp) && + !intel_edp_is_psr_enabled(dev)) + intel_edp_psr_do_enable(intel_dp); } -static uint8_t -intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], - int lane) +void intel_edp_psr_disable(struct intel_dp *intel_dp) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); - int s = ((lane & 1) ? - DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : - DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!intel_edp_is_psr_enabled(dev)) + return; + + I915_WRITE(EDP_PSR_CTL(dev), + I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE); - return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; + /* Wait till PSR is idle */ + if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) & + EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10)) + DRM_ERROR("Timed out waiting for PSR Idle State\n"); } +void intel_edp_psr_update(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_dp *intel_dp = NULL; -#if 0 -static char *voltage_names[] = { - "0.4V", "0.6V", "0.8V", "1.2V" -}; -static char *pre_emph_names[] = { - "0dB", "3.5dB", "6dB", "9.5dB" -}; -static char *link_train_names[] = { - "pattern 1", "pattern 2", "idle", "off" -}; -#endif + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) + if (encoder->type == INTEL_OUTPUT_EDP) { + intel_dp = enc_to_intel_dp(&encoder->base); + + if (!is_edp_psr(dev)) + return; + + if (!intel_edp_psr_match_conditions(intel_dp)) + intel_edp_psr_disable(intel_dp); + else + if (!intel_edp_is_psr_enabled(dev)) + intel_edp_psr_do_enable(intel_dp); + } +} + +static void intel_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct drm_device *dev = encoder->base.dev; + + /* Make sure the panel is off before trying to change the mode. But also + * ensure that we have vdd while we switch off the panel. */ + intel_edp_panel_vdd_on(intel_dp); + intel_edp_backlight_off(intel_dp); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_edp_panel_off(intel_dp); + + /* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */ + if (!(port == PORT_A || IS_VALLEYVIEW(dev))) + intel_dp_link_down(intel_dp); +} + +static void g4x_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + + if (port != PORT_A) + return; + + intel_dp_link_down(intel_dp); + ironlake_edp_pll_off(intel_dp); +} + +static void vlv_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_dp_link_down(intel_dp); +} + +static void chv_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + u32 val; + + intel_dp_link_down(intel_dp); + + mutex_lock(&dev_priv->dpio_lock); + + /* Propagate soft reset to data lane reset */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); + + mutex_unlock(&dev_priv->dpio_lock); +} + +static void intel_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(intel_dp->output_reg); + + if (WARN_ON(dp_reg & DP_PORT_EN)) + return; + + intel_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_start_link_train(intel_dp); + intel_edp_panel_on(intel_dp); + edp_panel_vdd_off(intel_dp, true); + intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); +} + +static void g4x_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_enable_dp(encoder); + intel_edp_backlight_on(intel_dp); +} + +static void vlv_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_edp_backlight_on(intel_dp); +} + +static void g4x_pre_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + + intel_dp_prepare(encoder); + + /* Only ilk+ has port A */ + if (dport->port == PORT_A) { + ironlake_set_pll_cpu_edp(intel_dp); + ironlake_edp_pll_on(intel_dp); + } +} + +static void vlv_pre_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + struct edp_power_seq power_seq; + u32 val; + + mutex_lock(&dev_priv->dpio_lock); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port)); + val = 0; + if (pipe) + val |= (1<<21); + else + val &= ~(1<<21); + val |= 0x001000c4; + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888); + + mutex_unlock(&dev_priv->dpio_lock); + + if (is_edp(intel_dp)) { + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + } + + intel_enable_dp(encoder); + + vlv_wait_port_ready(dev_priv, dport); +} + +static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + + intel_dp_prepare(encoder); + + /* Program Tx lane resets to default */ + mutex_lock(&dev_priv->dpio_lock); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), + DPIO_PCS_TX_LANE2_RESET | + DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), + DPIO_PCS_CLK_CRI_RXEB_EIOS_EN | + DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN | + (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) | + DPIO_PCS_CLK_SOFT_RESET); + + /* Fix up inter-pair skew failure */ + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000); + mutex_unlock(&dev_priv->dpio_lock); +} + +static void chv_pre_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct edp_power_seq power_seq; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + int data, i; + u32 val; + + mutex_lock(&dev_priv->dpio_lock); + + /* Deassert soft data lane reset*/ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); + val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); + val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); + + /* Program Tx lane latency optimal setting*/ + for (i = 0; i < 4; i++) { + /* Set the latency optimal bit */ + data = (i == 1) ? 0x0 : 0x6; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i), + data << DPIO_FRC_LATENCY_SHFIT); + + /* Set the upar bit */ + data = (i == 1) ? 0x0 : 0x1; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), + data << DPIO_UPAR_SHIFT); + } + + /* Data lane stagger programming */ + /* FIXME: Fix up value only after power analysis */ + + mutex_unlock(&dev_priv->dpio_lock); + + if (is_edp(intel_dp)) { + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + } + + intel_enable_dp(encoder); + + vlv_wait_port_ready(dev_priv, dport); +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + * + * Sinks are *supposed* to come up within 1ms from an off state, but we're also + * supposed to retry 3 times per the spec. + */ +static ssize_t +intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size) +{ + ssize_t ret; + int i; + + for (i = 0; i < 3; i++) { + ret = drm_dp_dpcd_read(aux, offset, buffer, size); + if (ret == size) + return ret; + msleep(1); + } + + return ret; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + return intel_dp_dpcd_read_wake(&intel_dp->aux, + DP_LANE0_1_STATUS, + link_status, + DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE; +} /* * These are source-specific values; current Intel hardware supports * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ -#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 static uint8_t -intel_dp_pre_emphasis_max(uint8_t voltage_swing) +intel_dp_voltage_max(struct intel_dp *intel_dp) { - switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { - case DP_TRAIN_VOLTAGE_SWING_400: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_600: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_800: - return DP_TRAIN_PRE_EMPHASIS_3_5; - case DP_TRAIN_VOLTAGE_SWING_1200: + struct drm_device *dev = intel_dp_to_dev(intel_dp); + enum port port = dp_to_dig_port(intel_dp)->port; + + if (IS_VALLEYVIEW(dev) || IS_BROADWELL(dev)) + return DP_TRAIN_VOLTAGE_SWING_1200; + else if (IS_GEN7(dev) && port == PORT_A) + return DP_TRAIN_VOLTAGE_SWING_800; + else if (HAS_PCH_CPT(dev) && port != PORT_A) + return DP_TRAIN_VOLTAGE_SWING_1200; + else + return DP_TRAIN_VOLTAGE_SWING_800; +} + +static uint8_t +intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + enum port port = dp_to_dig_port(intel_dp)->port; + + if (IS_BROADWELL(dev)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else if (IS_HASWELL(dev)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_9_5; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else if (IS_VALLEYVIEW(dev)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_9_5; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else if (IS_GEN7(dev) && port == PORT_A) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } +} + +static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct intel_crtc *intel_crtc = + to_intel_crtc(dport->base.base.crtc); + unsigned long demph_reg_value, preemph_reg_value, + uniqtranscale_reg_value; + uint8_t train_set = intel_dp->train_set[0]; + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + preemph_reg_value = 0x0004000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x552AB83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5548B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + demph_reg_value = 0x2B245555; + uniqtranscale_reg_value = 0x5560B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x5598DA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + preemph_reg_value = 0x0002000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5552B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B404848; + uniqtranscale_reg_value = 0x5580B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_6: + preemph_reg_value = 0x0000000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B305555; + uniqtranscale_reg_value = 0x5570B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B2B4040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + preemph_reg_value = 0x0006000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x1B405555; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; default: - return DP_TRAIN_PRE_EMPHASIS_0; + return 0; } + + mutex_lock(&dev_priv->dpio_lock); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), + uniqtranscale_reg_value); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000); + mutex_unlock(&dev_priv->dpio_lock); + + return 0; +} + +static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc); + u32 deemph_reg_value, margin_reg_value, val; + uint8_t train_set = intel_dp->train_set[0]; + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + int i; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 128; + margin_reg_value = 52; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 128; + margin_reg_value = 77; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 128; + margin_reg_value = 102; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + deemph_reg_value = 128; + margin_reg_value = 154; + /* FIXME extra to set for 1200 */ + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 85; + margin_reg_value = 78; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 85; + margin_reg_value = 116; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 85; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_6: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 64; + margin_reg_value = 104; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 64; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 43; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + default: + return 0; + } + + mutex_lock(&dev_priv->dpio_lock); + + /* Clear calc init */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + /* Program swing deemph */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i)); + val &= ~DPIO_SWING_DEEMPH9P5_MASK; + val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val); + } + + /* Program swing margin */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); + val &= ~DPIO_SWING_MARGIN_MASK; + val |= margin_reg_value << DPIO_SWING_MARGIN_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); + } + + /* Disable unique transition scale */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); + } + + if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK) + == DP_TRAIN_PRE_EMPHASIS_0) && + ((train_set & DP_TRAIN_VOLTAGE_SWING_MASK) + == DP_TRAIN_VOLTAGE_SWING_1200)) { + + /* + * The document said it needs to set bit 27 for ch0 and bit 26 + * for ch1. Might be a typo in the doc. + * For now, for this unique transition scale selection, set bit + * 27 for ch0 and ch1. + */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); + val |= DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); + } + + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); + val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT); + val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT); + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); + } + } + + /* Start swing calculation */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + /* LRC Bypass */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); + val |= DPIO_LRC_BYPASS; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val); + + mutex_unlock(&dev_priv->dpio_lock); + + return 0; } static void -intel_get_adjust_train(struct intel_dp *intel_dp) +intel_get_adjust_train(struct intel_dp *intel_dp, + const uint8_t link_status[DP_LINK_STATUS_SIZE]) { uint8_t v = 0; uint8_t p = 0; int lane; + uint8_t voltage_max; + uint8_t preemph_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { - uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane); - uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane); + uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane); if (this_v > v) v = this_v; @@ -1076,32 +2556,24 @@ intel_get_adjust_train(struct intel_dp *intel_dp) p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + voltage_max = intel_dp_voltage_max(intel_dp); + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; - if (p >= intel_dp_pre_emphasis_max(v)) - p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); + if (p >= preemph_max) + p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; for (lane = 0; lane < 4; lane++) intel_dp->train_set[lane] = v | p; } static uint32_t -intel_dp_signal_levels(struct intel_dp *intel_dp) +intel_gen4_signal_levels(uint8_t train_set) { - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t signal_levels = 0; - u8 train_set = intel_dp->train_set[0]; - u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK; - u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK; + uint32_t signal_levels = 0; - if (is_edp(intel_dp)) { - vswing = dev_priv->edp.vswing; - preemphasis = dev_priv->edp.preemphasis; - } - - switch (vswing) { + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_400: default: signal_levels |= DP_VOLTAGE_0_4; @@ -1116,7 +2588,7 @@ intel_dp_signal_levels(struct intel_dp *intel_dp) signal_levels |= DP_VOLTAGE_1_2; break; } - switch (preemphasis) { + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { case DP_TRAIN_PRE_EMPHASIS_0: default: signal_levels |= DP_PRE_EMPHASIS_0; @@ -1138,286 +2610,524 @@ intel_dp_signal_levels(struct intel_dp *intel_dp) static uint32_t intel_gen6_edp_signal_levels(uint8_t train_set) { - switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) { + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: - return EDP_LINK_TRAIN_400MV_0DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B; case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: - return EDP_LINK_TRAIN_400MV_6DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B; case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: - return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B; case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: - return EDP_LINK_TRAIN_800MV_0DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B; default: - DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n"); - return EDP_LINK_TRAIN_400MV_0DB_SNB_B; + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; } } -static uint8_t -intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], - int lane) +/* Gen7's DP voltage swing and pre-emphasis control */ +static uint32_t +intel_gen7_edp_signal_levels(uint8_t train_set) { - int i = DP_LANE0_1_STATUS + (lane >> 1); - int s = (lane & 1) * 4; - uint8_t l = intel_dp_link_status(link_status, i); + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400MV_6DB_IVB; - return (l >> s) & 0xf; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_600MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600MV_3_5DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_800MV_3_5DB_IVB; + + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_500MV_0DB_IVB; + } } -/* Check for clock recovery is done on all channels */ -static bool -intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */ +static uint32_t +intel_hsw_signal_levels(uint8_t train_set) { - int lane; - uint8_t lane_status; + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_400MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_400MV_3_5DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_400MV_6DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5: + return DDI_BUF_EMP_400MV_9_5DB_HSW; - for (lane = 0; lane < lane_count; lane++) { - lane_status = intel_get_lane_status(link_status, lane); - if ((lane_status & DP_LANE_CR_DONE) == 0) - return false; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_600MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_600MV_3_5DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_600MV_6DB_HSW; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_800MV_0DB_HSW; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_800MV_3_5DB_HSW; + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return DDI_BUF_EMP_400MV_0DB_HSW; } - return true; } -/* Check to see if channel eq is done on all channels */ -#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ - DP_LANE_CHANNEL_EQ_DONE|\ - DP_LANE_SYMBOL_LOCKED) -static bool -intel_channel_eq_ok(struct intel_dp *intel_dp) +static uint32_t +intel_bdw_signal_levels(uint8_t train_set) { - uint8_t lane_align; - uint8_t lane_status; - int lane; + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_400MV_0DB_BDW; /* Sel0 */ + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_400MV_3_5DB_BDW; /* Sel1 */ + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_400MV_6DB_BDW; /* Sel2 */ - lane_align = intel_dp_link_status(intel_dp->link_status, - DP_LANE_ALIGN_STATUS_UPDATED); - if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) - return false; - for (lane = 0; lane < intel_dp->lane_count; lane++) { - lane_status = intel_get_lane_status(intel_dp->link_status, lane); - if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) - return false; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_600MV_0DB_BDW; /* Sel3 */ + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_600MV_3_5DB_BDW; /* Sel4 */ + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: + return DDI_BUF_EMP_600MV_6DB_BDW; /* Sel5 */ + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_800MV_0DB_BDW; /* Sel6 */ + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return DDI_BUF_EMP_800MV_3_5DB_BDW; /* Sel7 */ + + case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0: + return DDI_BUF_EMP_1200MV_0DB_BDW; /* Sel8 */ + + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return DDI_BUF_EMP_400MV_0DB_BDW; /* Sel0 */ } - return true; +} + +/* Properly updates "DP" with the correct signal levels. */ +static void +intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; + struct drm_device *dev = intel_dig_port->base.base.dev; + uint32_t signal_levels, mask; + uint8_t train_set = intel_dp->train_set[0]; + + if (IS_BROADWELL(dev)) { + signal_levels = intel_bdw_signal_levels(train_set); + mask = DDI_BUF_EMP_MASK; + } else if (IS_HASWELL(dev)) { + signal_levels = intel_hsw_signal_levels(train_set); + mask = DDI_BUF_EMP_MASK; + } else if (IS_CHERRYVIEW(dev)) { + signal_levels = intel_chv_signal_levels(intel_dp); + mask = 0; + } else if (IS_VALLEYVIEW(dev)) { + signal_levels = intel_vlv_signal_levels(intel_dp); + mask = 0; + } else if (IS_GEN7(dev) && port == PORT_A) { + signal_levels = intel_gen7_edp_signal_levels(train_set); + mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; + } else if (IS_GEN6(dev) && port == PORT_A) { + signal_levels = intel_gen6_edp_signal_levels(train_set); + mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; + } else { + signal_levels = intel_gen4_signal_levels(train_set); + mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK; + } + + DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels); + + *DP = (*DP & ~mask) | signal_levels; } static bool -intel_dp_aux_handshake_required(struct intel_dp *intel_dp) +intel_dp_set_link_train(struct intel_dp *intel_dp, + uint32_t *DP, + uint8_t dp_train_pat) { - struct drm_device *dev = intel_dp->base.base.dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = intel_dig_port->port; + uint8_t buf[sizeof(intel_dp->train_set) + 1]; + int ret, len; - if (is_edp(intel_dp) && dev_priv->no_aux_handshake) - return false; + if (HAS_DDI(dev)) { + uint32_t temp = I915_READ(DP_TP_CTL(port)); - return true; + if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) + temp |= DP_TP_CTL_SCRAMBLE_DISABLE; + else + temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE; + + temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; + + break; + case DP_TRAINING_PATTERN_1: + temp |= DP_TP_CTL_LINK_TRAIN_PAT1; + break; + case DP_TRAINING_PATTERN_2: + temp |= DP_TP_CTL_LINK_TRAIN_PAT2; + break; + case DP_TRAINING_PATTERN_3: + temp |= DP_TP_CTL_LINK_TRAIN_PAT3; + break; + } + I915_WRITE(DP_TP_CTL(port), temp); + + } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { + *DP &= ~DP_LINK_TRAIN_MASK_CPT; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + *DP |= DP_LINK_TRAIN_OFF_CPT; + break; + case DP_TRAINING_PATTERN_1: + *DP |= DP_LINK_TRAIN_PAT_1_CPT; + break; + case DP_TRAINING_PATTERN_2: + *DP |= DP_LINK_TRAIN_PAT_2_CPT; + break; + case DP_TRAINING_PATTERN_3: + DRM_ERROR("DP training pattern 3 not supported\n"); + *DP |= DP_LINK_TRAIN_PAT_2_CPT; + break; + } + + } else { + *DP &= ~DP_LINK_TRAIN_MASK; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + *DP |= DP_LINK_TRAIN_OFF; + break; + case DP_TRAINING_PATTERN_1: + *DP |= DP_LINK_TRAIN_PAT_1; + break; + case DP_TRAINING_PATTERN_2: + *DP |= DP_LINK_TRAIN_PAT_2; + break; + case DP_TRAINING_PATTERN_3: + DRM_ERROR("DP training pattern 3 not supported\n"); + *DP |= DP_LINK_TRAIN_PAT_2; + break; + } + } + + I915_WRITE(intel_dp->output_reg, *DP); + POSTING_READ(intel_dp->output_reg); + + buf[0] = dp_train_pat; + if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) == + DP_TRAINING_PATTERN_DISABLE) { + /* don't write DP_TRAINING_LANEx_SET on disable */ + len = 1; + } else { + /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */ + memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count); + len = intel_dp->lane_count + 1; + } + + ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET, + buf, len); + + return ret == len; } static bool -intel_dp_set_link_train(struct intel_dp *intel_dp, - uint32_t dp_reg_value, +intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP, uint8_t dp_train_pat) { - struct drm_device *dev = intel_dp->base.base.dev; + memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); + intel_dp_set_signal_levels(intel_dp, DP); + return intel_dp_set_link_train(intel_dp, DP, dp_train_pat); +} + +static bool +intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP, + const uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; int ret; - I915_WRITE(intel_dp->output_reg, dp_reg_value); + intel_get_adjust_train(intel_dp, link_status); + intel_dp_set_signal_levels(intel_dp, DP); + + I915_WRITE(intel_dp->output_reg, *DP); POSTING_READ(intel_dp->output_reg); - if (!intel_dp_aux_handshake_required(intel_dp)) - return true; + ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, + intel_dp->train_set, intel_dp->lane_count); - intel_dp_aux_native_write_1(intel_dp, - DP_TRAINING_PATTERN_SET, - dp_train_pat); + return ret == intel_dp->lane_count; +} - ret = intel_dp_aux_native_write(intel_dp, - DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) - return false; +static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = intel_dig_port->port; + uint32_t val; - return true; + if (!HAS_DDI(dev)) + return; + + val = I915_READ(DP_TP_CTL(port)); + val &= ~DP_TP_CTL_LINK_TRAIN_MASK; + val |= DP_TP_CTL_LINK_TRAIN_IDLE; + I915_WRITE(DP_TP_CTL(port), val); + + /* + * On PORT_A we can have only eDP in SST mode. There the only reason + * we need to set idle transmission mode is to work around a HW issue + * where we enable the pipe while not in idle link-training mode. + * In this case there is requirement to wait for a minimum number of + * idle patterns to be sent. + */ + if (port == PORT_A) + return; + + if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE), + 1)) + DRM_ERROR("Timed out waiting for DP idle patterns\n"); } /* Enable corresponding port and start training pattern 1 */ -static void +void intel_dp_start_link_train(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); + struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base; + struct drm_device *dev = encoder->dev; int i; uint8_t voltage; - bool clock_recovery = false; - int tries; - u32 reg; + int voltage_tries, loop_tries; uint32_t DP = intel_dp->DP; + uint8_t link_config[2]; - /* Enable output, wait for it to become active */ - I915_WRITE(intel_dp->output_reg, intel_dp->DP); - POSTING_READ(intel_dp->output_reg); - intel_wait_for_vblank(dev, intel_crtc->pipe); + if (HAS_DDI(dev)) + intel_ddi_prepare_link_retrain(encoder); - if (intel_dp_aux_handshake_required(intel_dp)) - /* Write the link configuration data */ - intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, - intel_dp->link_configuration, - DP_LINK_CONFIGURATION_SIZE); + /* Write the link configuration data */ + link_config[0] = intel_dp->link_bw; + link_config[1] = intel_dp->lane_count; + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2); + + link_config[0] = 0; + link_config[1] = DP_SET_ANSI_8B10B; + drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2); DP |= DP_PORT_EN; - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) - DP &= ~DP_LINK_TRAIN_MASK_CPT; - else - DP &= ~DP_LINK_TRAIN_MASK; - memset(intel_dp->train_set, 0, 4); + + /* clock recovery */ + if (!intel_dp_reset_link_train(intel_dp, &DP, + DP_TRAINING_PATTERN_1 | + DP_LINK_SCRAMBLING_DISABLE)) { + DRM_ERROR("failed to enable link training\n"); + return; + } + voltage = 0xff; - tries = 0; - clock_recovery = false; + voltage_tries = 0; + loop_tries = 0; for (;;) { - /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ - uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { - signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; - } else { - signal_levels = intel_dp_signal_levels(intel_dp); - DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; - } + uint8_t link_status[DP_LINK_STATUS_SIZE]; - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) - reg = DP | DP_LINK_TRAIN_PAT_1_CPT; - else - reg = DP | DP_LINK_TRAIN_PAT_1; - - if (!intel_dp_set_link_train(intel_dp, reg, - DP_TRAINING_PATTERN_1)) + drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd); + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; - /* Set training pattern 1 */ + } - udelay(500); - if (intel_dp_aux_handshake_required(intel_dp)) { + if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("clock recovery OK\n"); break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; + } - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { - clock_recovery = true; + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_ERROR("too many full retries, give up\n"); break; } + intel_dp_reset_link_train(intel_dp, &DP, + DP_TRAINING_PATTERN_1 | + DP_LINK_SCRAMBLING_DISABLE); + voltage_tries = 0; + continue; + } - /* Check to see if we've tried the max voltage */ - for (i = 0; i < intel_dp->lane_count; i++) - if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) - break; - if (i == intel_dp->lane_count) + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++voltage_tries; + if (voltage_tries == 5) { + DRM_ERROR("too many voltage retries, give up\n"); break; + } + } else + voltage_tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) - break; - } else - tries = 0; - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + /* Update training set as requested by target */ + if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) { + DRM_ERROR("failed to update link training\n"); + break; } } intel_dp->DP = DP; } -static void +void intel_dp_complete_link_train(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; bool channel_eq = false; - int tries; - u32 reg; + int tries, cr_tries; uint32_t DP = intel_dp->DP; + uint32_t training_pattern = DP_TRAINING_PATTERN_2; + + /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/ + if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3) + training_pattern = DP_TRAINING_PATTERN_3; /* channel equalization */ + if (!intel_dp_set_link_train(intel_dp, &DP, + training_pattern | + DP_LINK_SCRAMBLING_DISABLE)) { + DRM_ERROR("failed to start channel equalization\n"); + return; + } + tries = 0; + cr_tries = 0; channel_eq = false; for (;;) { - /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ - uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; - if (IS_GEN6(dev) && is_edp(intel_dp)) { - signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; - } else { - signal_levels = intel_dp_signal_levels(intel_dp); - DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + if (cr_tries > 5) { + DRM_ERROR("failed to train DP, aborting\n"); + break; } - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) - reg = DP | DP_LINK_TRAIN_PAT_2_CPT; - else - reg = DP | DP_LINK_TRAIN_PAT_2; - - /* channel eq pattern */ - if (!intel_dp_set_link_train(intel_dp, reg, - DP_TRAINING_PATTERN_2)) + drm_dp_link_train_channel_eq_delay(intel_dp->dpcd); + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; + } - udelay(500); + /* Make sure clock is still ok */ + if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { + intel_dp_start_link_train(intel_dp); + intel_dp_set_link_train(intel_dp, &DP, + training_pattern | + DP_LINK_SCRAMBLING_DISABLE); + cr_tries++; + continue; + } - if (!intel_dp_aux_handshake_required(intel_dp)) { + if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { + channel_eq = true; break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; - - if (intel_channel_eq_ok(intel_dp)) { - channel_eq = true; - break; - } + } - /* Try 5 times */ - if (tries > 5) - break; + /* Try 5 times, then try clock recovery if that fails */ + if (tries > 5) { + intel_dp_link_down(intel_dp); + intel_dp_start_link_train(intel_dp); + intel_dp_set_link_train(intel_dp, &DP, + training_pattern | + DP_LINK_SCRAMBLING_DISABLE); + tries = 0; + cr_tries++; + continue; + } - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); - ++tries; + /* Update training set as requested by target */ + if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) { + DRM_ERROR("failed to update link training\n"); + break; } + ++tries; } - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) - reg = DP | DP_LINK_TRAIN_OFF_CPT; - else - reg = DP | DP_LINK_TRAIN_OFF; - I915_WRITE(intel_dp->output_reg, reg); - POSTING_READ(intel_dp->output_reg); - intel_dp_aux_native_write_1(intel_dp, - DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); + intel_dp_set_idle_link_train(intel_dp); + + intel_dp->DP = DP; + + if (channel_eq) + DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n"); + +} + +void intel_dp_stop_link_train(struct intel_dp *intel_dp) +{ + intel_dp_set_link_train(intel_dp, &intel_dp->DP, + DP_TRAINING_PATTERN_DISABLE); } static void intel_dp_link_down(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp->base.base.dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; + struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(intel_dig_port->base.base.crtc); uint32_t DP = intel_dp->DP; - DRM_DEBUG_KMS("\n"); + if (WARN_ON(HAS_DDI(dev))) + return; - if (is_edp(intel_dp)) { - DP &= ~DP_PLL_ENABLE; - I915_WRITE(intel_dp->output_reg, DP); - POSTING_READ(intel_dp->output_reg); - udelay(100); - } + if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)) + return; + + DRM_DEBUG_KMS("\n"); - if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { DP &= ~DP_LINK_TRAIN_MASK_CPT; I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT); } else { @@ -1426,12 +3136,158 @@ intel_dp_link_down(struct intel_dp *intel_dp) } POSTING_READ(intel_dp->output_reg); - msleep(17); + if (HAS_PCH_IBX(dev) && + I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { + struct drm_crtc *crtc = intel_dig_port->base.base.crtc; + + /* Hardware workaround: leaving our transcoder select + * set to transcoder B while it's off will prevent the + * corresponding HDMI output on transcoder A. + * + * Combine this with another hardware workaround: + * transcoder select bit can only be cleared while the + * port is enabled. + */ + DP &= ~DP_PIPEB_SELECT; + I915_WRITE(intel_dp->output_reg, DP); + + /* Changes to enable or select take place the vblank + * after being written. + */ + if (WARN_ON(crtc == NULL)) { + /* We should never try to disable a port without a crtc + * attached. For paranoia keep the code around for a + * bit. */ + POSTING_READ(intel_dp->output_reg); + msleep(50); + } else + intel_wait_for_vblank(dev, intel_crtc->pipe); + } - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + DP &= ~DP_AUDIO_OUTPUT_ENABLE; I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); POSTING_READ(intel_dp->output_reg); + msleep(intel_dp->panel_power_down_delay); +} + +static bool +intel_dp_get_dpcd(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3]; + + if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd, + sizeof(intel_dp->dpcd)) < 0) + return false; /* aux transfer failed */ + + hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd), + 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false); + DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump); + + if (intel_dp->dpcd[DP_DPCD_REV] == 0) + return false; /* DPCD not present */ + + /* Check if the panel supports PSR */ + memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd)); + if (is_edp(intel_dp)) { + intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT, + intel_dp->psr_dpcd, + sizeof(intel_dp->psr_dpcd)); + if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) { + dev_priv->psr.sink_support = true; + DRM_DEBUG_KMS("Detected EDP PSR Panel.\n"); + } + } + + /* Training Pattern 3 support */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 && + intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) { + intel_dp->use_tps3 = true; + DRM_DEBUG_KMS("Displayport TPS3 supported"); + } else + intel_dp->use_tps3 = false; + + if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & + DP_DWN_STRM_PORT_PRESENT)) + return true; /* native DP sink */ + + if (intel_dp->dpcd[DP_DPCD_REV] == 0x10) + return true; /* no per-port downstream info */ + + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0, + intel_dp->downstream_ports, + DP_MAX_DOWNSTREAM_PORTS) < 0) + return false; /* downstream port status fetch failed */ + + return true; +} + +static void +intel_dp_probe_oui(struct intel_dp *intel_dp) +{ + u8 buf[3]; + + if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) + return; + + intel_edp_panel_vdd_on(intel_dp); + + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3) + DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", + buf[0], buf[1], buf[2]); + + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3) + DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", + buf[0], buf[1], buf[2]); + + edp_panel_vdd_off(intel_dp, false); +} + +int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct intel_crtc *intel_crtc = + to_intel_crtc(intel_dig_port->base.base.crtc); + u8 buf[1]; + + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, buf) < 0) + return -EAGAIN; + + if (!(buf[0] & DP_TEST_CRC_SUPPORTED)) + return -ENOTTY; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, + DP_TEST_SINK_START) < 0) + return -EAGAIN; + + /* Wait 2 vblanks to be sure we will have the correct CRC value */ + intel_wait_for_vblank(dev, intel_crtc->pipe); + intel_wait_for_vblank(dev, intel_crtc->pipe); + + if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) + return -EAGAIN; + + drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, 0); + return 0; +} + +static bool +intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector) +{ + return intel_dp_dpcd_read_wake(&intel_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR, + sink_irq_vector, 1) == 1; +} + +static void +intel_dp_handle_test_request(struct intel_dp *intel_dp) +{ + /* NAK by default */ + drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, DP_TEST_NAK); } /* @@ -1443,152 +3299,296 @@ intel_dp_link_down(struct intel_dp *intel_dp) * 4. Check link status on receipt of hot-plug interrupt */ -static void +void intel_dp_check_link_status(struct intel_dp *intel_dp) { - if (!intel_dp->base.base.crtc) + struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; + u8 sink_irq_vector; + u8 link_status[DP_LINK_STATUS_SIZE]; + + /* FIXME: This access isn't protected by any locks. */ + if (!intel_encoder->connectors_active) return; - if (!intel_dp_get_link_status(intel_dp)) { - intel_dp_link_down(intel_dp); + if (WARN_ON(!intel_encoder->base.crtc)) + return; + + /* Try to read receiver status if the link appears to be up */ + if (!intel_dp_get_link_status(intel_dp, link_status)) { + return; + } + + /* Now read the DPCD to see if it's actually running */ + if (!intel_dp_get_dpcd(intel_dp)) { return; } - if (!intel_channel_eq_ok(intel_dp)) { + /* Try to read the source of the interrupt */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) { + /* Clear interrupt source */ + drm_dp_dpcd_writeb(&intel_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR, + sink_irq_vector); + + if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) + intel_dp_handle_test_request(intel_dp); + if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ)) + DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); + } + + if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", + intel_encoder->base.name); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); } } +/* XXX this is probably wrong for multiple downstream ports */ static enum drm_connector_status -ironlake_dp_detect(struct intel_dp *intel_dp) +intel_dp_detect_dpcd(struct intel_dp *intel_dp) { - enum drm_connector_status status; + uint8_t *dpcd = intel_dp->dpcd; + uint8_t type; + + if (!intel_dp_get_dpcd(intel_dp)) + return connector_status_disconnected; + + /* if there's no downstream port, we're done */ + if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT)) + return connector_status_connected; + + /* If we're HPD-aware, SINK_COUNT changes dynamically */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { + uint8_t reg; - /* Can't disconnect eDP */ - if (is_edp(intel_dp)) + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT, + ®, 1) < 0) + return connector_status_unknown; + + return DP_GET_SINK_COUNT(reg) ? connector_status_connected + : connector_status_disconnected; + } + + /* If no HPD, poke DDC gently */ + if (drm_probe_ddc(&intel_dp->aux.ddc)) return connector_status_connected; - status = connector_status_disconnected; - if (intel_dp_aux_native_read(intel_dp, - 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)) - == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) + /* Well we tried, say unknown for unreliable port types */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; + if (type == DP_DS_PORT_TYPE_VGA || + type == DP_DS_PORT_TYPE_NON_EDID) + return connector_status_unknown; + } else { + type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & + DP_DWN_STRM_PORT_TYPE_MASK; + if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || + type == DP_DWN_STRM_PORT_TYPE_OTHER) + return connector_status_unknown; + } + + /* Anything else is out of spec, warn and ignore */ + DRM_DEBUG_KMS("Broken DP branch device, ignoring\n"); + return connector_status_disconnected; +} + +static enum drm_connector_status +ironlake_dp_detect(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum drm_connector_status status; + + /* Can't disconnect eDP, but you can close the lid... */ + if (is_edp(intel_dp)) { + status = intel_panel_detect(dev); + if (status == connector_status_unknown) status = connector_status_connected; + return status; } - DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], - intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); - return status; + + if (!ibx_digital_port_connected(dev_priv, intel_dig_port)) + return connector_status_disconnected; + + return intel_dp_detect_dpcd(intel_dp); } static enum drm_connector_status g4x_dp_detect(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp->base.base.dev; + struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - enum drm_connector_status status; - uint32_t temp, bit; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + uint32_t bit; - switch (intel_dp->output_reg) { - case DP_B: - bit = DPB_HOTPLUG_INT_STATUS; - break; - case DP_C: - bit = DPC_HOTPLUG_INT_STATUS; - break; - case DP_D: - bit = DPD_HOTPLUG_INT_STATUS; - break; - default: - return connector_status_unknown; + /* Can't disconnect eDP, but you can close the lid... */ + if (is_edp(intel_dp)) { + enum drm_connector_status status; + + status = intel_panel_detect(dev); + if (status == connector_status_unknown) + status = connector_status_connected; + return status; } - temp = I915_READ(PORT_HOTPLUG_STAT); + if (IS_VALLEYVIEW(dev)) { + switch (intel_dig_port->port) { + case PORT_B: + bit = PORTB_HOTPLUG_LIVE_STATUS_VLV; + break; + case PORT_C: + bit = PORTC_HOTPLUG_LIVE_STATUS_VLV; + break; + case PORT_D: + bit = PORTD_HOTPLUG_LIVE_STATUS_VLV; + break; + default: + return connector_status_unknown; + } + } else { + switch (intel_dig_port->port) { + case PORT_B: + bit = PORTB_HOTPLUG_LIVE_STATUS_G4X; + break; + case PORT_C: + bit = PORTC_HOTPLUG_LIVE_STATUS_G4X; + break; + case PORT_D: + bit = PORTD_HOTPLUG_LIVE_STATUS_G4X; + break; + default: + return connector_status_unknown; + } + } - if ((temp & bit) == 0) + if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0) return connector_status_disconnected; - status = connector_status_disconnected; - if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) - { - if (intel_dp->dpcd[0] != 0) - status = connector_status_connected; + return intel_dp_detect_dpcd(intel_dp); +} + +static struct edid * +intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) +{ + struct intel_connector *intel_connector = to_intel_connector(connector); + + /* use cached edid if we have one */ + if (intel_connector->edid) { + /* invalid edid */ + if (IS_ERR(intel_connector->edid)) + return NULL; + + return drm_edid_duplicate(intel_connector->edid); } - return status; + return drm_get_edid(connector, adapter); +} + +static int +intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter) +{ + struct intel_connector *intel_connector = to_intel_connector(connector); + + /* use cached edid if we have one */ + if (intel_connector->edid) { + /* invalid edid */ + if (IS_ERR(intel_connector->edid)) + return 0; + + return intel_connector_update_modes(connector, + intel_connector->edid); + } + + return intel_ddc_get_modes(connector, adapter); } -/** - * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. - * - * \return true if DP port is connected. - * \return false if DP port is disconnected. - */ static enum drm_connector_status intel_dp_detect(struct drm_connector *connector, bool force) { struct intel_dp *intel_dp = intel_attached_dp(connector); - struct drm_device *dev = intel_dp->base.base.dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; enum drm_connector_status status; + enum intel_display_power_domain power_domain; struct edid *edid = NULL; + intel_runtime_pm_get(dev_priv); + + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.id, connector->name); + intel_dp->has_audio = false; if (HAS_PCH_SPLIT(dev)) status = ironlake_dp_detect(intel_dp); else status = g4x_dp_detect(intel_dp); + if (status != connector_status_connected) - return status; + goto out; + + intel_dp_probe_oui(intel_dp); - if (intel_dp->force_audio) { - intel_dp->has_audio = intel_dp->force_audio > 0; + if (intel_dp->force_audio != HDMI_AUDIO_AUTO) { + intel_dp->has_audio = (intel_dp->force_audio == HDMI_AUDIO_ON); } else { - edid = drm_get_edid(connector, &intel_dp->adapter); + edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc); if (edid) { intel_dp->has_audio = drm_detect_monitor_audio(edid); - connector->display_info.raw_edid = NULL; kfree(edid); } } - return connector_status_connected; + if (intel_encoder->type != INTEL_OUTPUT_EDP) + intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; + status = connector_status_connected; + +out: + intel_display_power_put(dev_priv, power_domain); + + intel_runtime_pm_put(dev_priv); + + return status; } static int intel_dp_get_modes(struct drm_connector *connector) { struct intel_dp *intel_dp = intel_attached_dp(connector); - struct drm_device *dev = intel_dp->base.base.dev; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct intel_connector *intel_connector = to_intel_connector(connector); + struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; int ret; /* We should parse the EDID data and find out if it has an audio sink */ - ret = intel_ddc_get_modes(connector, &intel_dp->adapter); - if (ret) { - if (is_edp(intel_dp) && !dev_priv->panel_fixed_mode) { - struct drm_display_mode *newmode; - list_for_each_entry(newmode, &connector->probed_modes, - head) { - if (newmode->type & DRM_MODE_TYPE_PREFERRED) { - dev_priv->panel_fixed_mode = - drm_mode_duplicate(dev, newmode); - break; - } - } - } + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + ret = intel_dp_get_edid_modes(connector, &intel_dp->aux.ddc); + intel_display_power_put(dev_priv, power_domain); + if (ret) return ret; - } - /* if eDP has no EDID, try to use fixed panel mode from VBT */ - if (is_edp(intel_dp)) { - if (dev_priv->panel_fixed_mode != NULL) { - struct drm_display_mode *mode; - mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); + /* if eDP has no EDID, fall back to fixed mode */ + if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(dev, + intel_connector->panel.fixed_mode); + if (mode) { drm_mode_probed_add(connector, mode); return 1; } @@ -1596,77 +3596,164 @@ static int intel_dp_get_modes(struct drm_connector *connector) return 0; } +static bool +intel_dp_detect_audio(struct drm_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(connector); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; + struct edid *edid; + bool has_audio = false; + + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + + edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc); + if (edid) { + has_audio = drm_detect_monitor_audio(edid); + kfree(edid); + } + + intel_display_power_put(dev_priv, power_domain); + + return has_audio; +} + static int intel_dp_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t val) { - struct intel_dp *intel_dp = intel_attached_dp(connector); + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_connector *intel_connector = to_intel_connector(connector); + struct intel_encoder *intel_encoder = intel_attached_encoder(connector); + struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); int ret; - ret = drm_connector_property_set_value(connector, property, val); + ret = drm_object_property_set_value(&connector->base, property, val); if (ret) return ret; - if (property == intel_dp->force_audio_property) { - if (val == intel_dp->force_audio) + if (property == dev_priv->force_audio_property) { + int i = val; + bool has_audio; + + if (i == intel_dp->force_audio) return 0; - intel_dp->force_audio = val; + intel_dp->force_audio = i; + + if (i == HDMI_AUDIO_AUTO) + has_audio = intel_dp_detect_audio(connector); + else + has_audio = (i == HDMI_AUDIO_ON); + + if (has_audio == intel_dp->has_audio) + return 0; + + intel_dp->has_audio = has_audio; + goto done; + } + + if (property == dev_priv->broadcast_rgb_property) { + bool old_auto = intel_dp->color_range_auto; + uint32_t old_range = intel_dp->color_range; + + switch (val) { + case INTEL_BROADCAST_RGB_AUTO: + intel_dp->color_range_auto = true; + break; + case INTEL_BROADCAST_RGB_FULL: + intel_dp->color_range_auto = false; + intel_dp->color_range = 0; + break; + case INTEL_BROADCAST_RGB_LIMITED: + intel_dp->color_range_auto = false; + intel_dp->color_range = DP_COLOR_RANGE_16_235; + break; + default: + return -EINVAL; + } - if (val > 0 && intel_dp->has_audio) + if (old_auto == intel_dp->color_range_auto && + old_range == intel_dp->color_range) return 0; - if (val < 0 && !intel_dp->has_audio) + + goto done; + } + + if (is_edp(intel_dp) && + property == connector->dev->mode_config.scaling_mode_property) { + if (val == DRM_MODE_SCALE_NONE) { + DRM_DEBUG_KMS("no scaling not supported\n"); + return -EINVAL; + } + + if (intel_connector->panel.fitting_mode == val) { + /* the eDP scaling property is not changed */ return 0; + } + intel_connector->panel.fitting_mode = val; - intel_dp->has_audio = val > 0; goto done; } return -EINVAL; done: - if (intel_dp->base.base.crtc) { - struct drm_crtc *crtc = intel_dp->base.base.crtc; - drm_crtc_helper_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, - crtc->fb); - } + if (intel_encoder->base.crtc) + intel_crtc_restore_mode(intel_encoder->base.crtc); return 0; } static void -intel_dp_destroy (struct drm_connector *connector) +intel_dp_connector_destroy(struct drm_connector *connector) { - drm_sysfs_connector_remove(connector); + struct intel_connector *intel_connector = to_intel_connector(connector); + + if (!IS_ERR_OR_NULL(intel_connector->edid)) + kfree(intel_connector->edid); + + /* Can't call is_edp() since the encoder may have been destroyed + * already. */ + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) + intel_panel_fini(&intel_connector->panel); + drm_connector_cleanup(connector); kfree(connector); } -static void intel_dp_encoder_destroy(struct drm_encoder *encoder) +void intel_dp_encoder_destroy(struct drm_encoder *encoder) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); + struct intel_dp *intel_dp = &intel_dig_port->dp; + struct drm_device *dev = intel_dp_to_dev(intel_dp); - i2c_del_adapter(&intel_dp->adapter); + drm_dp_aux_unregister(&intel_dp->aux); drm_encoder_cleanup(encoder); - kfree(intel_dp); + if (is_edp(intel_dp)) { + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + edp_panel_vdd_off_sync(intel_dp); + drm_modeset_unlock(&dev->mode_config.connection_mutex); + if (intel_dp->edp_notifier.notifier_call) { + unregister_reboot_notifier(&intel_dp->edp_notifier); + intel_dp->edp_notifier.notifier_call = NULL; + } + } + kfree(intel_dig_port); } -static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { - .dpms = intel_dp_dpms, - .mode_fixup = intel_dp_mode_fixup, - .prepare = intel_dp_prepare, - .mode_set = intel_dp_mode_set, - .commit = intel_dp_commit, -}; - static const struct drm_connector_funcs intel_dp_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_connector_dpms, .detect = intel_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_dp_set_property, - .destroy = intel_dp_destroy, + .destroy = intel_dp_connector_destroy, }; static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { @@ -1682,28 +3769,24 @@ static const struct drm_encoder_funcs intel_dp_enc_funcs = { static void intel_dp_hot_plug(struct intel_encoder *intel_encoder) { - struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base); + struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); - if (intel_dp->dpms_mode == DRM_MODE_DPMS_ON) - intel_dp_check_link_status(intel_dp); + intel_dp_check_link_status(intel_dp); } /* Return which DP Port should be selected for Transcoder DP control */ int -intel_trans_dp_port_sel (struct drm_crtc *crtc) +intel_trans_dp_port_sel(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_encoder *encoder; + struct intel_encoder *intel_encoder; + struct intel_dp *intel_dp; - list_for_each_entry(encoder, &mode_config->encoder_list, head) { - struct intel_dp *intel_dp; + for_each_encoder_on_crtc(dev, crtc, intel_encoder) { + intel_dp = enc_to_intel_dp(&intel_encoder->base); - if (encoder->crtc != crtc) - continue; - - intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT || + intel_encoder->type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; } @@ -1711,20 +3794,29 @@ intel_trans_dp_port_sel (struct drm_crtc *crtc) } /* check the VBT to see whether the eDP is on DP-D port */ -bool intel_dpd_is_edp(struct drm_device *dev) +bool intel_dp_is_edp(struct drm_device *dev, enum port port) { struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; + union child_device_config *p_child; int i; + static const short port_mapping[] = { + [PORT_B] = PORT_IDPB, + [PORT_C] = PORT_IDPC, + [PORT_D] = PORT_IDPD, + }; - if (!dev_priv->child_dev_num) + if (port == PORT_A) + return true; + + if (!dev_priv->vbt.child_dev_num) return false; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + p_child = dev_priv->vbt.child_dev + i; - if (p_child->dvo_port == PORT_IDPD && - p_child->device_type == DEVICE_TYPE_eDP) + if (p_child->common.dvo_port == port_mapping[port] && + (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) == + (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) return true; } return false; @@ -1733,141 +3825,515 @@ bool intel_dpd_is_edp(struct drm_device *dev) static void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) { - struct drm_device *dev = connector->dev; + struct intel_connector *intel_connector = to_intel_connector(connector); + + intel_attach_force_audio_property(connector); + intel_attach_broadcast_rgb_property(connector); + intel_dp->color_range_auto = true; - intel_dp->force_audio_property = - drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2); - if (intel_dp->force_audio_property) { - intel_dp->force_audio_property->values[0] = -1; - intel_dp->force_audio_property->values[1] = 1; - drm_connector_attach_property(connector, intel_dp->force_audio_property, 0); + if (is_edp(intel_dp)) { + drm_mode_create_scaling_mode_property(connector->dev); + drm_object_attach_property( + &connector->base, + connector->dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_ASPECT); + intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT; } } -void -intel_dp_init(struct drm_device *dev, int output_reg) +static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp) +{ + intel_dp->last_power_cycle = jiffies; + intel_dp->last_power_on = jiffies; + intel_dp->last_backlight_off = jiffies; +} + +static void +intel_dp_init_panel_power_sequencer(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *out) { struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_connector *connector; - struct intel_dp *intel_dp; - struct intel_encoder *intel_encoder; - struct intel_connector *intel_connector; - const char *name = NULL; - int type; + struct edp_power_seq cur, vbt, spec, final; + u32 pp_on, pp_off, pp_div, pp; + int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg; + + if (HAS_PCH_SPLIT(dev)) { + pp_ctrl_reg = PCH_PP_CONTROL; + pp_on_reg = PCH_PP_ON_DELAYS; + pp_off_reg = PCH_PP_OFF_DELAYS; + pp_div_reg = PCH_PP_DIVISOR; + } else { + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); + pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); + pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); + } + + /* Workaround: Need to write PP_CONTROL with the unlock key as + * the very first thing. */ + pp = ironlake_get_pp_control(intel_dp); + I915_WRITE(pp_ctrl_reg, pp); + + pp_on = I915_READ(pp_on_reg); + pp_off = I915_READ(pp_off_reg); + pp_div = I915_READ(pp_div_reg); + + /* Pull timing values out of registers */ + cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> + PANEL_POWER_UP_DELAY_SHIFT; + + cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> + PANEL_LIGHT_ON_DELAY_SHIFT; + + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> + PANEL_LIGHT_OFF_DELAY_SHIFT; + + cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> + PANEL_POWER_DOWN_DELAY_SHIFT; + + cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> + PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000; + + DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); + + vbt = dev_priv->vbt.edp_pps; + + /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of + * our hw here, which are all in 100usec. */ + spec.t1_t3 = 210 * 10; + spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */ + spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */ + spec.t10 = 500 * 10; + /* This one is special and actually in units of 100ms, but zero + * based in the hw (so we need to add 100 ms). But the sw vbt + * table multiplies it with 1000 to make it in units of 100usec, + * too. */ + spec.t11_t12 = (510 + 100) * 10; + + DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12); + + /* Use the max of the register settings and vbt. If both are + * unset, fall back to the spec limits. */ +#define assign_final(field) final.field = (max(cur.field, vbt.field) == 0 ? \ + spec.field : \ + max(cur.field, vbt.field)) + assign_final(t1_t3); + assign_final(t8); + assign_final(t9); + assign_final(t10); + assign_final(t11_t12); +#undef assign_final + +#define get_delay(field) (DIV_ROUND_UP(final.field, 10)) + intel_dp->panel_power_up_delay = get_delay(t1_t3); + intel_dp->backlight_on_delay = get_delay(t8); + intel_dp->backlight_off_delay = get_delay(t9); + intel_dp->panel_power_down_delay = get_delay(t10); + intel_dp->panel_power_cycle_delay = get_delay(t11_t12); +#undef get_delay + + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + if (out) + *out = final; +} - intel_dp = kzalloc(sizeof(struct intel_dp), GFP_KERNEL); - if (!intel_dp) +static void +intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *seq) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on, pp_off, pp_div, port_sel = 0; + int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev); + int pp_on_reg, pp_off_reg, pp_div_reg; + + if (HAS_PCH_SPLIT(dev)) { + pp_on_reg = PCH_PP_ON_DELAYS; + pp_off_reg = PCH_PP_OFF_DELAYS; + pp_div_reg = PCH_PP_DIVISOR; + } else { + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + + pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); + pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); + } + + /* + * And finally store the new values in the power sequencer. The + * backlight delays are set to 1 because we do manual waits on them. For + * T8, even BSpec recommends doing it. For T9, if we don't do this, + * we'll end up waiting for the backlight off delay twice: once when we + * do the manual sleep, and once when we disable the panel and wait for + * the PP_STATUS bit to become zero. + */ + pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | + (1 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); + /* Compute the divisor for the pp clock, simply match the Bspec + * formula. */ + pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; + pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) + << PANEL_POWER_CYCLE_DELAY_SHIFT); + + /* Haswell doesn't have any port selection bits for the panel + * power sequencer any more. */ + if (IS_VALLEYVIEW(dev)) { + if (dp_to_dig_port(intel_dp)->port == PORT_B) + port_sel = PANEL_PORT_SELECT_DPB_VLV; + else + port_sel = PANEL_PORT_SELECT_DPC_VLV; + } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + if (dp_to_dig_port(intel_dp)->port == PORT_A) + port_sel = PANEL_PORT_SELECT_DPA; + else + port_sel = PANEL_PORT_SELECT_DPD; + } + + pp_on |= port_sel; + + I915_WRITE(pp_on_reg, pp_on); + I915_WRITE(pp_off_reg, pp_off); + I915_WRITE(pp_div_reg, pp_div); + + DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", + I915_READ(pp_on_reg), + I915_READ(pp_off_reg), + I915_READ(pp_div_reg)); +} + +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *encoder; + struct intel_dp *intel_dp = NULL; + struct intel_crtc_config *config = NULL; + struct intel_crtc *intel_crtc = NULL; + struct intel_connector *intel_connector = dev_priv->drrs.connector; + u32 reg, val; + enum edp_drrs_refresh_rate_type index = DRRS_HIGH_RR; + + if (refresh_rate <= 0) { + DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n"); + return; + } + + if (intel_connector == NULL) { + DRM_DEBUG_KMS("DRRS supported for eDP only.\n"); return; + } - intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); - if (!intel_connector) { - kfree(intel_dp); + if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) { + DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n"); return; } - intel_encoder = &intel_dp->base; - if (HAS_PCH_SPLIT(dev) && output_reg == PCH_DP_D) - if (intel_dpd_is_edp(dev)) - intel_dp->is_pch_edp = true; + encoder = intel_attached_encoder(&intel_connector->base); + intel_dp = enc_to_intel_dp(&encoder->base); + intel_crtc = encoder->new_crtc; - if (output_reg == DP_A || is_pch_edp(intel_dp)) { - type = DRM_MODE_CONNECTOR_eDP; - intel_encoder->type = INTEL_OUTPUT_EDP; + if (!intel_crtc) { + DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n"); + return; + } + + config = &intel_crtc->config; + + if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) { + DRM_DEBUG_KMS("Only Seamless DRRS supported.\n"); + return; + } + + if (intel_connector->panel.downclock_mode->vrefresh == refresh_rate) + index = DRRS_LOW_RR; + + if (index == intel_dp->drrs_state.refresh_rate_type) { + DRM_DEBUG_KMS( + "DRRS requested for previously set RR...ignoring\n"); + return; + } + + if (!intel_crtc->active) { + DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n"); + return; + } + + if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) { + reg = PIPECONF(intel_crtc->config.cpu_transcoder); + val = I915_READ(reg); + if (index > DRRS_HIGH_RR) { + val |= PIPECONF_EDP_RR_MODE_SWITCH; + intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2); + } else { + val &= ~PIPECONF_EDP_RR_MODE_SWITCH; + } + I915_WRITE(reg, val); + } + + /* + * mutex taken to ensure that there is no race between differnt + * drrs calls trying to update refresh rate. This scenario may occur + * in future when idleness detection based DRRS in kernel and + * possible calls from user space to set differnt RR are made. + */ + + mutex_lock(&intel_dp->drrs_state.mutex); + + intel_dp->drrs_state.refresh_rate_type = index; + + mutex_unlock(&intel_dp->drrs_state.mutex); + + DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate); +} + +static struct drm_display_mode * +intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, + struct intel_connector *intel_connector, + struct drm_display_mode *fixed_mode) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_dp *intel_dp = &intel_dig_port->dp; + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *downclock_mode = NULL; + + if (INTEL_INFO(dev)->gen <= 6) { + DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n"); + return NULL; + } + + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { + DRM_INFO("VBT doesn't support DRRS\n"); + return NULL; + } + + downclock_mode = intel_find_panel_downclock + (dev, fixed_mode, connector); + + if (!downclock_mode) { + DRM_INFO("DRRS not supported\n"); + return NULL; + } + + dev_priv->drrs.connector = intel_connector; + + mutex_init(&intel_dp->drrs_state.mutex); + + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type; + + intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR; + DRM_INFO("seamless DRRS supported for eDP panel.\n"); + return downclock_mode; +} + +static bool intel_edp_init_connector(struct intel_dp *intel_dp, + struct intel_connector *intel_connector, + struct edp_power_seq *power_seq) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = intel_encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *fixed_mode = NULL; + struct drm_display_mode *downclock_mode = NULL; + bool has_dpcd; + struct drm_display_mode *scan; + struct edid *edid; + + intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED; + + if (!is_edp(intel_dp)) + return true; + + /* The VDD bit needs a power domain reference, so if the bit is already + * enabled when we boot, grab this reference. */ + if (edp_have_panel_vdd(intel_dp)) { + enum intel_display_power_domain power_domain; + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + } + + /* Cache DPCD and EDID for edp. */ + intel_edp_panel_vdd_on(intel_dp); + has_dpcd = intel_dp_get_dpcd(intel_dp); + edp_panel_vdd_off(intel_dp, false); + + if (has_dpcd) { + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) + dev_priv->no_aux_handshake = + intel_dp->dpcd[DP_MAX_DOWNSPREAD] & + DP_NO_AUX_HANDSHAKE_LINK_TRAINING; } else { - type = DRM_MODE_CONNECTOR_DisplayPort; - intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; + /* if this fails, presume the device is a ghost */ + DRM_INFO("failed to retrieve link info, disabling eDP\n"); + return false; } - connector = &intel_connector->base; - drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); - drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + /* We now know it's not a ghost, init power sequence regs. */ + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, power_seq); - connector->polled = DRM_CONNECTOR_POLL_HPD; + mutex_lock(&dev->mode_config.mutex); + edid = drm_get_edid(connector, &intel_dp->aux.ddc); + if (edid) { + if (drm_add_edid_modes(connector, edid)) { + drm_mode_connector_update_edid_property(connector, + edid); + drm_edid_to_eld(connector, edid); + } else { + kfree(edid); + edid = ERR_PTR(-EINVAL); + } + } else { + edid = ERR_PTR(-ENOENT); + } + intel_connector->edid = edid; + + /* prefer fixed mode from EDID if available */ + list_for_each_entry(scan, &connector->probed_modes, head) { + if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { + fixed_mode = drm_mode_duplicate(dev, scan); + downclock_mode = intel_dp_drrs_init( + intel_dig_port, + intel_connector, fixed_mode); + break; + } + } + + /* fallback to VBT if available for eDP */ + if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) { + fixed_mode = drm_mode_duplicate(dev, + dev_priv->vbt.lfp_lvds_vbt_mode); + if (fixed_mode) + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + } + mutex_unlock(&dev->mode_config.mutex); + + if (IS_VALLEYVIEW(dev)) { + intel_dp->edp_notifier.notifier_call = edp_notify_handler; + register_reboot_notifier(&intel_dp->edp_notifier); + } + + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); + intel_panel_setup_backlight(connector); + + return true; +} + +bool +intel_dp_init_connector(struct intel_digital_port *intel_dig_port, + struct intel_connector *intel_connector) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_dp *intel_dp = &intel_dig_port->dp; + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = intel_encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = intel_dig_port->port; + struct edp_power_seq power_seq = { 0 }; + int type; - if (output_reg == DP_B || output_reg == PCH_DP_B) - intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT); - else if (output_reg == DP_C || output_reg == PCH_DP_C) - intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT); - else if (output_reg == DP_D || output_reg == PCH_DP_D) - intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT); + /* intel_dp vfuncs */ + if (IS_VALLEYVIEW(dev)) + intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider; + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider; + else if (HAS_PCH_SPLIT(dev)) + intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider; + else + intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider; - if (is_edp(intel_dp)) - intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT); + intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl; + + /* Preserve the current hw state. */ + intel_dp->DP = I915_READ(intel_dp->output_reg); + intel_dp->attached_connector = intel_connector; + + if (intel_dp_is_edp(dev, port)) + type = DRM_MODE_CONNECTOR_eDP; + else + type = DRM_MODE_CONNECTOR_DisplayPort; + + /* + * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but + * for DP the encoder type can be set by the caller to + * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it. + */ + if (type == DRM_MODE_CONNECTOR_eDP) + intel_encoder->type = INTEL_OUTPUT_EDP; + + DRM_DEBUG_KMS("Adding %s connector on port %c\n", + type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", + port_name(port)); + + drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); - intel_encoder->crtc_mask = (1 << 0) | (1 << 1); connector->interlace_allowed = true; connector->doublescan_allowed = 0; - intel_dp->output_reg = output_reg; - intel_dp->has_audio = false; - intel_dp->dpms_mode = DRM_MODE_DPMS_ON; - - drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs, - DRM_MODE_ENCODER_TMDS); - drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs); + INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, + edp_panel_vdd_work); intel_connector_attach_encoder(intel_connector, intel_encoder); drm_sysfs_connector_add(connector); - /* Set up the DDC bus. */ - switch (output_reg) { - case DP_A: - name = "DPDDC-A"; - break; - case DP_B: - case PCH_DP_B: - dev_priv->hotplug_supported_mask |= - HDMIB_HOTPLUG_INT_STATUS; - name = "DPDDC-B"; - break; - case DP_C: - case PCH_DP_C: - dev_priv->hotplug_supported_mask |= - HDMIC_HOTPLUG_INT_STATUS; - name = "DPDDC-C"; - break; - case DP_D: - case PCH_DP_D: - dev_priv->hotplug_supported_mask |= - HDMID_HOTPLUG_INT_STATUS; - name = "DPDDC-D"; - break; - } + if (HAS_DDI(dev)) + intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; + else + intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_connector->unregister = intel_dp_connector_unregister; - intel_dp_i2c_init(intel_dp, intel_connector, name); + /* Set up the hotplug pin. */ + switch (port) { + case PORT_A: + intel_encoder->hpd_pin = HPD_PORT_A; + break; + case PORT_B: + intel_encoder->hpd_pin = HPD_PORT_B; + break; + case PORT_C: + intel_encoder->hpd_pin = HPD_PORT_C; + break; + case PORT_D: + intel_encoder->hpd_pin = HPD_PORT_D; + break; + default: + BUG(); + } - /* Cache some DPCD data in the eDP case */ if (is_edp(intel_dp)) { - int ret; - bool was_on; - - was_on = ironlake_edp_panel_on(intel_dp); - ret = intel_dp_aux_native_read(intel_dp, DP_DPCD_REV, - intel_dp->dpcd, - sizeof(intel_dp->dpcd)); - if (ret == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] >= 0x11) - dev_priv->no_aux_handshake = intel_dp->dpcd[3] & - DP_NO_AUX_HANDSHAKE_LINK_TRAINING; - } else { - DRM_ERROR("failed to retrieve link info\n"); - } - if (!was_on) - ironlake_edp_panel_off(dev); + intel_dp_init_panel_power_timestamps(intel_dp); + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); } - intel_encoder->hot_plug = intel_dp_hot_plug; + intel_dp_aux_init(intel_dp, intel_connector); - if (is_edp(intel_dp)) { - /* initialize panel mode from VBT if available for eDP */ - if (dev_priv->lfp_lvds_vbt_mode) { - dev_priv->panel_fixed_mode = - drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); - if (dev_priv->panel_fixed_mode) { - dev_priv->panel_fixed_mode->type |= - DRM_MODE_TYPE_PREFERRED; - } + intel_dp->psr_setup_done = false; + + if (!intel_edp_init_connector(intel_dp, intel_connector, &power_seq)) { + drm_dp_aux_unregister(&intel_dp->aux); + if (is_edp(intel_dp)) { + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + edp_panel_vdd_off_sync(intel_dp); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + return false; } intel_dp_add_properties(intel_dp, connector); @@ -1880,4 +4346,71 @@ intel_dp_init(struct drm_device *dev, int output_reg) u32 temp = I915_READ(PEG_BAND_GAP_DATA); I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); } + + return true; +} + +void +intel_dp_init(struct drm_device *dev, int output_reg, enum port port) +{ + struct intel_digital_port *intel_dig_port; + struct intel_encoder *intel_encoder; + struct drm_encoder *encoder; + struct intel_connector *intel_connector; + + intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); + if (!intel_dig_port) + return; + + intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL); + if (!intel_connector) { + kfree(intel_dig_port); + return; + } + + intel_encoder = &intel_dig_port->base; + encoder = &intel_encoder->base; + + drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs, + DRM_MODE_ENCODER_TMDS); + + intel_encoder->compute_config = intel_dp_compute_config; + intel_encoder->disable = intel_disable_dp; + intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_encoder->get_config = intel_dp_get_config; + if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_enable = chv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + intel_encoder->post_disable = chv_post_disable_dp; + } else if (IS_VALLEYVIEW(dev)) { + intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; + intel_encoder->pre_enable = vlv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + intel_encoder->post_disable = vlv_post_disable_dp; + } else { + intel_encoder->pre_enable = g4x_pre_enable_dp; + intel_encoder->enable = g4x_enable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; + } + + intel_dig_port->port = port; + intel_dig_port->dp.output_reg = output_reg; + + intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; + if (IS_CHERRYVIEW(dev)) { + if (port == PORT_D) + intel_encoder->crtc_mask = 1 << 2; + else + intel_encoder->crtc_mask = (1 << 0) | (1 << 1); + } else { + intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); + } + intel_encoder->cloneable = 0; + intel_encoder->hot_plug = intel_dp_hot_plug; + + if (!intel_dp_init_connector(intel_dig_port, intel_connector)) { + drm_encoder_cleanup(encoder); + kfree(intel_dig_port); + kfree(intel_connector); + } } |