diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_ddi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 1400 |
1 files changed, 780 insertions, 620 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index fb961bb8190..b17b9c7c769 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -42,7 +42,6 @@ static const u32 hsw_ddi_translations_dp[] = { 0x80C30FFF, 0x000B0000, 0x00FFFFFF, 0x00040006, 0x80D75FFF, 0x000B0000, - 0x00FFFFFF, 0x00040006 /* HDMI parameters */ }; static const u32 hsw_ddi_translations_fdi[] = { @@ -55,10 +54,64 @@ static const u32 hsw_ddi_translations_fdi[] = { 0x00C30FFF, 0x001E0000, 0x00FFFFFF, 0x00060006, 0x00D75FFF, 0x001E0000, - 0x00FFFFFF, 0x00040006 /* HDMI parameters */ }; -static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder) +static const u32 hsw_ddi_translations_hdmi[] = { + /* Idx NT mV diff T mV diff db */ + 0x00FFFFFF, 0x0006000E, /* 0: 400 400 0 */ + 0x00E79FFF, 0x000E000C, /* 1: 400 500 2 */ + 0x00D75FFF, 0x0005000A, /* 2: 400 600 3.5 */ + 0x00FFFFFF, 0x0005000A, /* 3: 600 600 0 */ + 0x00E79FFF, 0x001D0007, /* 4: 600 750 2 */ + 0x00D75FFF, 0x000C0004, /* 5: 600 900 3.5 */ + 0x00FFFFFF, 0x00040006, /* 6: 800 800 0 */ + 0x80E79FFF, 0x00030002, /* 7: 800 1000 2 */ + 0x00FFFFFF, 0x00140005, /* 8: 850 850 0 */ + 0x00FFFFFF, 0x000C0004, /* 9: 900 900 0 */ + 0x00FFFFFF, 0x001C0003, /* 10: 950 950 0 */ + 0x80FFFFFF, 0x00030002, /* 11: 1000 1000 0 */ +}; + +static const u32 bdw_ddi_translations_edp[] = { + 0x00FFFFFF, 0x00000012, /* eDP parameters */ + 0x00EBAFFF, 0x00020011, + 0x00C71FFF, 0x0006000F, + 0x00FFFFFF, 0x00020011, + 0x00DB6FFF, 0x0005000F, + 0x00BEEFFF, 0x000A000C, + 0x00FFFFFF, 0x0005000F, + 0x00DB6FFF, 0x000A000C, + 0x00FFFFFF, 0x000A000C, + 0x00FFFFFF, 0x00140006 /* HDMI parameters 800mV 0dB*/ +}; + +static const u32 bdw_ddi_translations_dp[] = { + 0x00FFFFFF, 0x0007000E, /* DP parameters */ + 0x00D75FFF, 0x000E000A, + 0x00BEFFFF, 0x00140006, + 0x00FFFFFF, 0x000E000A, + 0x00D75FFF, 0x00180004, + 0x80CB2FFF, 0x001B0002, + 0x00F7DFFF, 0x00180004, + 0x80D75FFF, 0x001B0002, + 0x80FFFFFF, 0x001B0002, + 0x00FFFFFF, 0x00140006 /* HDMI parameters 800mV 0dB*/ +}; + +static const u32 bdw_ddi_translations_fdi[] = { + 0x00FFFFFF, 0x0001000E, /* FDI parameters */ + 0x00D75FFF, 0x0004000A, + 0x00C30FFF, 0x00070006, + 0x00AAAFFF, 0x000C0000, + 0x00FFFFFF, 0x0004000A, + 0x00D75FFF, 0x00090004, + 0x00C30FFF, 0x000C0000, + 0x00FFFFFF, 0x00070006, + 0x00D75FFF, 0x000C0000, + 0x00FFFFFF, 0x00140006 /* HDMI parameters 800mV 0dB*/ +}; + +enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder) { struct drm_encoder *encoder = &intel_encoder->base; int type = intel_encoder->type; @@ -78,34 +131,70 @@ static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder) } } -/* On Haswell, DDI port buffers must be programmed with correct values - * in advance. The buffer values are different for FDI and DP modes, +/* + * Starting with Haswell, DDI port buffers must be programmed with correct + * values in advance. The buffer values are different for FDI and DP modes, * but the HDMI/DVI fields are shared among those. So we program the DDI * in either FDI or DP modes only, as HDMI connections will work with both * of those */ -static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, - bool use_fdi_mode) +static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; int i; - const u32 *ddi_translations = ((use_fdi_mode) ? - hsw_ddi_translations_fdi : - hsw_ddi_translations_dp); - - DRM_DEBUG_DRIVER("Initializing DDI buffers for port %c in %s mode\n", - port_name(port), - use_fdi_mode ? "FDI" : "DP"); + int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + const u32 *ddi_translations_fdi; + const u32 *ddi_translations_dp; + const u32 *ddi_translations_edp; + const u32 *ddi_translations; + + if (IS_BROADWELL(dev)) { + ddi_translations_fdi = bdw_ddi_translations_fdi; + ddi_translations_dp = bdw_ddi_translations_dp; + ddi_translations_edp = bdw_ddi_translations_edp; + } else if (IS_HASWELL(dev)) { + ddi_translations_fdi = hsw_ddi_translations_fdi; + ddi_translations_dp = hsw_ddi_translations_dp; + ddi_translations_edp = hsw_ddi_translations_dp; + } else { + WARN(1, "ddi translation table missing\n"); + ddi_translations_edp = bdw_ddi_translations_dp; + ddi_translations_fdi = bdw_ddi_translations_fdi; + ddi_translations_dp = bdw_ddi_translations_dp; + } - WARN((use_fdi_mode && (port != PORT_E)), - "Programming port %c in FDI mode, this probably will not work.\n", - port_name(port)); + switch (port) { + case PORT_A: + ddi_translations = ddi_translations_edp; + break; + case PORT_B: + case PORT_C: + ddi_translations = ddi_translations_dp; + break; + case PORT_D: + if (intel_dp_is_edp(dev, PORT_D)) + ddi_translations = ddi_translations_edp; + else + ddi_translations = ddi_translations_dp; + break; + case PORT_E: + ddi_translations = ddi_translations_fdi; + break; + default: + BUG(); + } - for (i=0, reg=DDI_BUF_TRANS(port); i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) { + for (i = 0, reg = DDI_BUF_TRANS(port); + i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) { I915_WRITE(reg, ddi_translations[i]); reg += 4; } + /* Entry 9 is for HDMI: */ + for (i = 0; i < 2; i++) { + I915_WRITE(reg, hsw_ddi_translations_hdmi[hdmi_level * 2 + i]); + reg += 4; + } } /* Program DDI buffers translations for DP. By default, program ports A-D in DP @@ -118,14 +207,8 @@ void intel_prepare_ddi(struct drm_device *dev) if (!HAS_DDI(dev)) return; - for (port = PORT_A; port < PORT_E; port++) - intel_prepare_ddi_buffers(dev, port, false); - - /* DDI E is the suggested one to work in FDI mode, so program is as such - * by default. It will have to be re-programmed in case a digital DP - * output will be detected on it - */ - intel_prepare_ddi_buffers(dev, PORT_E, true); + for (port = PORT_A; port <= PORT_E; port++) + intel_prepare_ddi_buffers(dev, port); } static const long hsw_ddi_buf_ctl_values[] = { @@ -174,6 +257,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) * mode set "sequence for CRT port" document: * - TP1 to TP2 time with the default value * - FDI delay to 90h + * + * WaFDIAutoLinkSetTimingOverrride:hsw */ I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | @@ -181,7 +266,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) /* Enable the PCH Receiver FDI PLL */ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | - FDI_RX_PLL_ENABLE | ((intel_crtc->fdi_lanes - 1) << 19); + FDI_RX_PLL_ENABLE | + FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); I915_WRITE(_FDI_RXA_CTL, rx_ctl_val); POSTING_READ(_FDI_RXA_CTL); udelay(220); @@ -209,7 +295,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) * port reversal bit */ I915_WRITE(DDI_BUF_CTL(PORT_E), DDI_BUF_CTL_ENABLE | - ((intel_crtc->fdi_lanes - 1) << 1) | + ((intel_crtc->config.fdi_lanes - 1) << 1) | hsw_ddi_buf_ctl_values[i / 2]); POSTING_READ(DDI_BUF_CTL(PORT_E)); @@ -278,462 +364,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) DRM_ERROR("FDI link training failed!\n"); } -/* WRPLL clock dividers */ -struct wrpll_tmds_clock { - u32 clock; - u16 p; /* Post divider */ - u16 n2; /* Feedback divider */ - u16 r2; /* Reference divider */ -}; - -/* Table of matching values for WRPLL clocks programming for each frequency. - * The code assumes this table is sorted. */ -static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = { - {19750, 38, 25, 18}, - {20000, 48, 32, 18}, - {21000, 36, 21, 15}, - {21912, 42, 29, 17}, - {22000, 36, 22, 15}, - {23000, 36, 23, 15}, - {23500, 40, 40, 23}, - {23750, 26, 16, 14}, - {24000, 36, 24, 15}, - {25000, 36, 25, 15}, - {25175, 26, 40, 33}, - {25200, 30, 21, 15}, - {26000, 36, 26, 15}, - {27000, 30, 21, 14}, - {27027, 18, 100, 111}, - {27500, 30, 29, 19}, - {28000, 34, 30, 17}, - {28320, 26, 30, 22}, - {28322, 32, 42, 25}, - {28750, 24, 23, 18}, - {29000, 30, 29, 18}, - {29750, 32, 30, 17}, - {30000, 30, 25, 15}, - {30750, 30, 41, 24}, - {31000, 30, 31, 18}, - {31500, 30, 28, 16}, - {32000, 30, 32, 18}, - {32500, 28, 32, 19}, - {33000, 24, 22, 15}, - {34000, 28, 30, 17}, - {35000, 26, 32, 19}, - {35500, 24, 30, 19}, - {36000, 26, 26, 15}, - {36750, 26, 46, 26}, - {37000, 24, 23, 14}, - {37762, 22, 40, 26}, - {37800, 20, 21, 15}, - {38000, 24, 27, 16}, - {38250, 24, 34, 20}, - {39000, 24, 26, 15}, - {40000, 24, 32, 18}, - {40500, 20, 21, 14}, - {40541, 22, 147, 89}, - {40750, 18, 19, 14}, - {41000, 16, 17, 14}, - {41500, 22, 44, 26}, - {41540, 22, 44, 26}, - {42000, 18, 21, 15}, - {42500, 22, 45, 26}, - {43000, 20, 43, 27}, - {43163, 20, 24, 15}, - {44000, 18, 22, 15}, - {44900, 20, 108, 65}, - {45000, 20, 25, 15}, - {45250, 20, 52, 31}, - {46000, 18, 23, 15}, - {46750, 20, 45, 26}, - {47000, 20, 40, 23}, - {48000, 18, 24, 15}, - {49000, 18, 49, 30}, - {49500, 16, 22, 15}, - {50000, 18, 25, 15}, - {50500, 18, 32, 19}, - {51000, 18, 34, 20}, - {52000, 18, 26, 15}, - {52406, 14, 34, 25}, - {53000, 16, 22, 14}, - {54000, 16, 24, 15}, - {54054, 16, 173, 108}, - {54500, 14, 24, 17}, - {55000, 12, 22, 18}, - {56000, 14, 45, 31}, - {56250, 16, 25, 15}, - {56750, 14, 25, 17}, - {57000, 16, 27, 16}, - {58000, 16, 43, 25}, - {58250, 16, 38, 22}, - {58750, 16, 40, 23}, - {59000, 14, 26, 17}, - {59341, 14, 40, 26}, - {59400, 16, 44, 25}, - {60000, 16, 32, 18}, - {60500, 12, 39, 29}, - {61000, 14, 49, 31}, - {62000, 14, 37, 23}, - {62250, 14, 42, 26}, - {63000, 12, 21, 15}, - {63500, 14, 28, 17}, - {64000, 12, 27, 19}, - {65000, 14, 32, 19}, - {65250, 12, 29, 20}, - {65500, 12, 32, 22}, - {66000, 12, 22, 15}, - {66667, 14, 38, 22}, - {66750, 10, 21, 17}, - {67000, 14, 33, 19}, - {67750, 14, 58, 33}, - {68000, 14, 30, 17}, - {68179, 14, 46, 26}, - {68250, 14, 46, 26}, - {69000, 12, 23, 15}, - {70000, 12, 28, 18}, - {71000, 12, 30, 19}, - {72000, 12, 24, 15}, - {73000, 10, 23, 17}, - {74000, 12, 23, 14}, - {74176, 8, 100, 91}, - {74250, 10, 22, 16}, - {74481, 12, 43, 26}, - {74500, 10, 29, 21}, - {75000, 12, 25, 15}, - {75250, 10, 39, 28}, - {76000, 12, 27, 16}, - {77000, 12, 53, 31}, - {78000, 12, 26, 15}, - {78750, 12, 28, 16}, - {79000, 10, 38, 26}, - {79500, 10, 28, 19}, - {80000, 12, 32, 18}, - {81000, 10, 21, 14}, - {81081, 6, 100, 111}, - {81624, 8, 29, 24}, - {82000, 8, 17, 14}, - {83000, 10, 40, 26}, - {83950, 10, 28, 18}, - {84000, 10, 28, 18}, - {84750, 6, 16, 17}, - {85000, 6, 17, 18}, - {85250, 10, 30, 19}, - {85750, 10, 27, 17}, - {86000, 10, 43, 27}, - {87000, 10, 29, 18}, - {88000, 10, 44, 27}, - {88500, 10, 41, 25}, - {89000, 10, 28, 17}, - {89012, 6, 90, 91}, - {89100, 10, 33, 20}, - {90000, 10, 25, 15}, - {91000, 10, 32, 19}, - {92000, 10, 46, 27}, - {93000, 10, 31, 18}, - {94000, 10, 40, 23}, - {94500, 10, 28, 16}, - {95000, 10, 44, 25}, - {95654, 10, 39, 22}, - {95750, 10, 39, 22}, - {96000, 10, 32, 18}, - {97000, 8, 23, 16}, - {97750, 8, 42, 29}, - {98000, 8, 45, 31}, - {99000, 8, 22, 15}, - {99750, 8, 34, 23}, - {100000, 6, 20, 18}, - {100500, 6, 19, 17}, - {101000, 6, 37, 33}, - {101250, 8, 21, 14}, - {102000, 6, 17, 15}, - {102250, 6, 25, 22}, - {103000, 8, 29, 19}, - {104000, 8, 37, 24}, - {105000, 8, 28, 18}, - {106000, 8, 22, 14}, - {107000, 8, 46, 29}, - {107214, 8, 27, 17}, - {108000, 8, 24, 15}, - {108108, 8, 173, 108}, - {109000, 6, 23, 19}, - {110000, 6, 22, 18}, - {110013, 6, 22, 18}, - {110250, 8, 49, 30}, - {110500, 8, 36, 22}, - {111000, 8, 23, 14}, - {111264, 8, 150, 91}, - {111375, 8, 33, 20}, - {112000, 8, 63, 38}, - {112500, 8, 25, 15}, - {113100, 8, 57, 34}, - {113309, 8, 42, 25}, - {114000, 8, 27, 16}, - {115000, 6, 23, 18}, - {116000, 8, 43, 25}, - {117000, 8, 26, 15}, - {117500, 8, 40, 23}, - {118000, 6, 38, 29}, - {119000, 8, 30, 17}, - {119500, 8, 46, 26}, - {119651, 8, 39, 22}, - {120000, 8, 32, 18}, - {121000, 6, 39, 29}, - {121250, 6, 31, 23}, - {121750, 6, 23, 17}, - {122000, 6, 42, 31}, - {122614, 6, 30, 22}, - {123000, 6, 41, 30}, - {123379, 6, 37, 27}, - {124000, 6, 51, 37}, - {125000, 6, 25, 18}, - {125250, 4, 13, 14}, - {125750, 4, 27, 29}, - {126000, 6, 21, 15}, - {127000, 6, 24, 17}, - {127250, 6, 41, 29}, - {128000, 6, 27, 19}, - {129000, 6, 43, 30}, - {129859, 4, 25, 26}, - {130000, 6, 26, 18}, - {130250, 6, 42, 29}, - {131000, 6, 32, 22}, - {131500, 6, 38, 26}, - {131850, 6, 41, 28}, - {132000, 6, 22, 15}, - {132750, 6, 28, 19}, - {133000, 6, 34, 23}, - {133330, 6, 37, 25}, - {134000, 6, 61, 41}, - {135000, 6, 21, 14}, - {135250, 6, 167, 111}, - {136000, 6, 62, 41}, - {137000, 6, 35, 23}, - {138000, 6, 23, 15}, - {138500, 6, 40, 26}, - {138750, 6, 37, 24}, - {139000, 6, 34, 22}, - {139050, 6, 34, 22}, - {139054, 6, 34, 22}, - {140000, 6, 28, 18}, - {141000, 6, 36, 23}, - {141500, 6, 22, 14}, - {142000, 6, 30, 19}, - {143000, 6, 27, 17}, - {143472, 4, 17, 16}, - {144000, 6, 24, 15}, - {145000, 6, 29, 18}, - {146000, 6, 47, 29}, - {146250, 6, 26, 16}, - {147000, 6, 49, 30}, - {147891, 6, 23, 14}, - {148000, 6, 23, 14}, - {148250, 6, 28, 17}, - {148352, 4, 100, 91}, - {148500, 6, 33, 20}, - {149000, 6, 48, 29}, - {150000, 6, 25, 15}, - {151000, 4, 19, 17}, - {152000, 6, 27, 16}, - {152280, 6, 44, 26}, - {153000, 6, 34, 20}, - {154000, 6, 53, 31}, - {155000, 6, 31, 18}, - {155250, 6, 50, 29}, - {155750, 6, 45, 26}, - {156000, 6, 26, 15}, - {157000, 6, 61, 35}, - {157500, 6, 28, 16}, - {158000, 6, 65, 37}, - {158250, 6, 44, 25}, - {159000, 6, 53, 30}, - {159500, 6, 39, 22}, - {160000, 6, 32, 18}, - {161000, 4, 31, 26}, - {162000, 4, 18, 15}, - {162162, 4, 131, 109}, - {162500, 4, 53, 44}, - {163000, 4, 29, 24}, - {164000, 4, 17, 14}, - {165000, 4, 22, 18}, - {166000, 4, 32, 26}, - {167000, 4, 26, 21}, - {168000, 4, 46, 37}, - {169000, 4, 104, 83}, - {169128, 4, 64, 51}, - {169500, 4, 39, 31}, - {170000, 4, 34, 27}, - {171000, 4, 19, 15}, - {172000, 4, 51, 40}, - {172750, 4, 32, 25}, - {172800, 4, 32, 25}, - {173000, 4, 41, 32}, - {174000, 4, 49, 38}, - {174787, 4, 22, 17}, - {175000, 4, 35, 27}, - {176000, 4, 30, 23}, - {177000, 4, 38, 29}, - {178000, 4, 29, 22}, - {178500, 4, 37, 28}, - {179000, 4, 53, 40}, - {179500, 4, 73, 55}, - {180000, 4, 20, 15}, - {181000, 4, 55, 41}, - {182000, 4, 31, 23}, - {183000, 4, 42, 31}, - {184000, 4, 30, 22}, - {184750, 4, 26, 19}, - {185000, 4, 37, 27}, - {186000, 4, 51, 37}, - {187000, 4, 36, 26}, - {188000, 4, 32, 23}, - {189000, 4, 21, 15}, - {190000, 4, 38, 27}, - {190960, 4, 41, 29}, - {191000, 4, 41, 29}, - {192000, 4, 27, 19}, - {192250, 4, 37, 26}, - {193000, 4, 20, 14}, - {193250, 4, 53, 37}, - {194000, 4, 23, 16}, - {194208, 4, 23, 16}, - {195000, 4, 26, 18}, - {196000, 4, 45, 31}, - {197000, 4, 35, 24}, - {197750, 4, 41, 28}, - {198000, 4, 22, 15}, - {198500, 4, 25, 17}, - {199000, 4, 28, 19}, - {200000, 4, 37, 25}, - {201000, 4, 61, 41}, - {202000, 4, 112, 75}, - {202500, 4, 21, 14}, - {203000, 4, 146, 97}, - {204000, 4, 62, 41}, - {204750, 4, 44, 29}, - {205000, 4, 38, 25}, - {206000, 4, 29, 19}, - {207000, 4, 23, 15}, - {207500, 4, 40, 26}, - {208000, 4, 37, 24}, - {208900, 4, 48, 31}, - {209000, 4, 48, 31}, - {209250, 4, 31, 20}, - {210000, 4, 28, 18}, - {211000, 4, 25, 16}, - {212000, 4, 22, 14}, - {213000, 4, 30, 19}, - {213750, 4, 38, 24}, - {214000, 4, 46, 29}, - {214750, 4, 35, 22}, - {215000, 4, 43, 27}, - {216000, 4, 24, 15}, - {217000, 4, 37, 23}, - {218000, 4, 42, 26}, - {218250, 4, 42, 26}, - {218750, 4, 34, 21}, - {219000, 4, 47, 29}, - {220000, 4, 44, 27}, - {220640, 4, 49, 30}, - {220750, 4, 36, 22}, - {221000, 4, 36, 22}, - {222000, 4, 23, 14}, - {222525, 4, 28, 17}, - {222750, 4, 33, 20}, - {227000, 4, 37, 22}, - {230250, 4, 29, 17}, - {233500, 4, 38, 22}, - {235000, 4, 40, 23}, - {238000, 4, 30, 17}, - {241500, 2, 17, 19}, - {245250, 2, 20, 22}, - {247750, 2, 22, 24}, - {253250, 2, 15, 16}, - {256250, 2, 18, 19}, - {262500, 2, 31, 32}, - {267250, 2, 66, 67}, - {268500, 2, 94, 95}, - {270000, 2, 14, 14}, - {272500, 2, 77, 76}, - {273750, 2, 57, 56}, - {280750, 2, 24, 23}, - {281250, 2, 23, 22}, - {286000, 2, 17, 16}, - {291750, 2, 26, 24}, - {296703, 2, 56, 51}, - {297000, 2, 22, 20}, - {298000, 2, 21, 19}, -}; - -static void intel_ddi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_crtc *crtc = encoder->crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_encoder *intel_encoder = to_intel_encoder(encoder); - int port = intel_ddi_get_encoder_port(intel_encoder); - int pipe = intel_crtc->pipe; - int type = intel_encoder->type; - - DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n", - port_name(port), pipe_name(pipe)); - - intel_crtc->eld_vld = false; - if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct intel_digital_port *intel_dig_port = - enc_to_dig_port(encoder); - - intel_dp->DP = intel_dig_port->port_reversal | - DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW; - switch (intel_dp->lane_count) { - case 1: - intel_dp->DP |= DDI_PORT_WIDTH_X1; - break; - case 2: - intel_dp->DP |= DDI_PORT_WIDTH_X2; - break; - case 4: - intel_dp->DP |= DDI_PORT_WIDTH_X4; - break; - default: - intel_dp->DP |= DDI_PORT_WIDTH_X4; - WARN(1, "Unexpected DP lane count %d\n", - intel_dp->lane_count); - break; - } - - if (intel_dp->has_audio) { - DRM_DEBUG_DRIVER("DP audio on pipe %c on DDI\n", - pipe_name(intel_crtc->pipe)); - - /* write eld */ - DRM_DEBUG_DRIVER("DP audio: write eld information\n"); - intel_write_eld(encoder, adjusted_mode); - } - - intel_dp_init_link_config(intel_dp); - - } else if (type == INTEL_OUTPUT_HDMI) { - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); - - if (intel_hdmi->has_audio) { - /* Proper support for digital audio needs a new logic - * and a new set of registers, so we leave it for future - * patch bombing. - */ - DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n", - pipe_name(intel_crtc->pipe)); - - /* write eld */ - DRM_DEBUG_DRIVER("HDMI audio: write eld information\n"); - intel_write_eld(encoder, adjusted_mode); - } - - intel_hdmi->set_infoframes(encoder, adjusted_mode); - } -} - static struct intel_encoder * intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) { @@ -748,8 +378,8 @@ intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) } if (num_encoders != 1) - WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders, - intel_crtc->pipe); + WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, + pipe_name(intel_crtc->pipe)); BUG_ON(ret == NULL); return ret; @@ -802,41 +432,330 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc) intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE; } -static void intel_ddi_calculate_wrpll(int clock, int *p, int *n2, int *r2) +#define LC_FREQ 2700 +#define LC_FREQ_2K (LC_FREQ * 2000) + +#define P_MIN 2 +#define P_MAX 64 +#define P_INC 2 + +/* Constraints for PLL good behavior */ +#define REF_MIN 48 +#define REF_MAX 400 +#define VCO_MIN 2400 +#define VCO_MAX 4800 + +#define ABS_DIFF(a, b) ((a > b) ? (a - b) : (b - a)) + +struct wrpll_rnp { + unsigned p, n2, r2; +}; + +static unsigned wrpll_get_budget_for_freq(int clock) { - u32 i; + unsigned budget; + + switch (clock) { + case 25175000: + case 25200000: + case 27000000: + case 27027000: + case 37762500: + case 37800000: + case 40500000: + case 40541000: + case 54000000: + case 54054000: + case 59341000: + case 59400000: + case 72000000: + case 74176000: + case 74250000: + case 81000000: + case 81081000: + case 89012000: + case 89100000: + case 108000000: + case 108108000: + case 111264000: + case 111375000: + case 148352000: + case 148500000: + case 162000000: + case 162162000: + case 222525000: + case 222750000: + case 296703000: + case 297000000: + budget = 0; + break; + case 233500000: + case 245250000: + case 247750000: + case 253250000: + case 298000000: + budget = 1500; + break; + case 169128000: + case 169500000: + case 179500000: + case 202000000: + budget = 2000; + break; + case 256250000: + case 262500000: + case 270000000: + case 272500000: + case 273750000: + case 280750000: + case 281250000: + case 286000000: + case 291750000: + budget = 4000; + break; + case 267250000: + case 268500000: + budget = 5000; + break; + default: + budget = 1000; + break; + } - for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++) - if (clock <= wrpll_tmds_clock_table[i].clock) - break; + return budget; +} - if (i == ARRAY_SIZE(wrpll_tmds_clock_table)) - i--; +static void wrpll_update_rnp(uint64_t freq2k, unsigned budget, + unsigned r2, unsigned n2, unsigned p, + struct wrpll_rnp *best) +{ + uint64_t a, b, c, d, diff, diff_best; - *p = wrpll_tmds_clock_table[i].p; - *n2 = wrpll_tmds_clock_table[i].n2; - *r2 = wrpll_tmds_clock_table[i].r2; + /* No best (r,n,p) yet */ + if (best->p == 0) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + return; + } - if (wrpll_tmds_clock_table[i].clock != clock) - DRM_INFO("WRPLL: using settings for %dKHz on %dKHz mode\n", - wrpll_tmds_clock_table[i].clock, clock); + /* + * Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to + * freq2k. + * + * delta = 1e6 * + * abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) / + * freq2k; + * + * and we would like delta <= budget. + * + * If the discrepancy is above the PPM-based budget, always prefer to + * improve upon the previous solution. However, if you're within the + * budget, try to maximize Ref * VCO, that is N / (P * R^2). + */ + a = freq2k * budget * p * r2; + b = freq2k * budget * best->p * best->r2; + diff = ABS_DIFF((freq2k * p * r2), (LC_FREQ_2K * n2)); + diff_best = ABS_DIFF((freq2k * best->p * best->r2), + (LC_FREQ_2K * best->n2)); + c = 1000000 * diff; + d = 1000000 * diff_best; + + if (a < c && b < d) { + /* If both are above the budget, pick the closer */ + if (best->p * best->r2 * diff < p * r2 * diff_best) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + } + } else if (a >= c && b < d) { + /* If A is below the threshold but B is above it? Update. */ + best->p = p; + best->n2 = n2; + best->r2 = r2; + } else if (a >= c && b >= d) { + /* Both are below the limit, so pick the higher n2/(r2*r2) */ + if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + } + } + /* Otherwise a < c && b >= d, do nothing */ +} - DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n", - clock, *p, *n2, *r2); +static int intel_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, + int reg) +{ + int refclk = LC_FREQ; + int n, p, r; + u32 wrpll; + + wrpll = I915_READ(reg); + switch (wrpll & SPLL_PLL_REF_MASK) { + case SPLL_PLL_SSC: + case SPLL_PLL_NON_SSC: + /* + * We could calculate spread here, but our checking + * code only cares about 5% accuracy, and spread is a max of + * 0.5% downspread. + */ + refclk = 135; + break; + case SPLL_PLL_LCPLL: + refclk = LC_FREQ; + break; + default: + WARN(1, "bad wrpll refclk\n"); + return 0; + } + + r = wrpll & WRPLL_DIVIDER_REF_MASK; + p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; + n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; + + /* Convert to KHz, p & r have a fixed point portion */ + return (refclk * n * 100) / (p * r); } -bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) +static void intel_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + enum port port = intel_ddi_get_encoder_port(encoder); + int link_clock = 0; + u32 val, pll; + + val = I915_READ(PORT_CLK_SEL(port)); + switch (val & PORT_CLK_SEL_MASK) { + case PORT_CLK_SEL_LCPLL_810: + link_clock = 81000; + break; + case PORT_CLK_SEL_LCPLL_1350: + link_clock = 135000; + break; + case PORT_CLK_SEL_LCPLL_2700: + link_clock = 270000; + break; + case PORT_CLK_SEL_WRPLL1: + link_clock = intel_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL1); + break; + case PORT_CLK_SEL_WRPLL2: + link_clock = intel_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL2); + break; + case PORT_CLK_SEL_SPLL: + pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK; + if (pll == SPLL_PLL_FREQ_810MHz) + link_clock = 81000; + else if (pll == SPLL_PLL_FREQ_1350MHz) + link_clock = 135000; + else if (pll == SPLL_PLL_FREQ_2700MHz) + link_clock = 270000; + else { + WARN(1, "bad spll freq\n"); + return; + } + break; + default: + WARN(1, "bad port clock sel\n"); + return; + } + + pipe_config->port_clock = link_clock * 2; + + if (pipe_config->has_pch_encoder) + pipe_config->adjusted_mode.crtc_clock = + intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->fdi_m_n); + else if (pipe_config->has_dp_encoder) + pipe_config->adjusted_mode.crtc_clock = + intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->dp_m_n); + else + pipe_config->adjusted_mode.crtc_clock = pipe_config->port_clock; +} + +static void +intel_ddi_calculate_wrpll(int clock /* in Hz */, + unsigned *r2_out, unsigned *n2_out, unsigned *p_out) +{ + uint64_t freq2k; + unsigned p, n2, r2; + struct wrpll_rnp best = { 0, 0, 0 }; + unsigned budget; + + freq2k = clock / 100; + + budget = wrpll_get_budget_for_freq(clock); + + /* Special case handling for 540 pixel clock: bypass WR PLL entirely + * and directly pass the LC PLL to it. */ + if (freq2k == 5400000) { + *n2_out = 2; + *p_out = 1; + *r2_out = 2; + return; + } + + /* + * Ref = LC_FREQ / R, where Ref is the actual reference input seen by + * the WR PLL. + * + * We want R so that REF_MIN <= Ref <= REF_MAX. + * Injecting R2 = 2 * R gives: + * REF_MAX * r2 > LC_FREQ * 2 and + * REF_MIN * r2 < LC_FREQ * 2 + * + * Which means the desired boundaries for r2 are: + * LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN + * + */ + for (r2 = LC_FREQ * 2 / REF_MAX + 1; + r2 <= LC_FREQ * 2 / REF_MIN; + r2++) { + + /* + * VCO = N * Ref, that is: VCO = N * LC_FREQ / R + * + * Once again we want VCO_MIN <= VCO <= VCO_MAX. + * Injecting R2 = 2 * R and N2 = 2 * N, we get: + * VCO_MAX * r2 > n2 * LC_FREQ and + * VCO_MIN * r2 < n2 * LC_FREQ) + * + * Which means the desired boundaries for n2 are: + * VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ + */ + for (n2 = VCO_MIN * r2 / LC_FREQ + 1; + n2 <= VCO_MAX * r2 / LC_FREQ; + n2++) { + + for (p = P_MIN; p <= P_MAX; p += P_INC) + wrpll_update_rnp(freq2k, budget, + r2, n2, p, &best); + } + } + + *n2_out = best.n2; + *p_out = best.p; + *r2_out = best.r2; +} + +/* + * Tries to find a PLL for the CRTC. If it finds, it increases the refcount and + * stores it in intel_crtc->ddi_pll_sel, so other mode sets won't be able to + * steal the selected PLL. You need to call intel_ddi_pll_enable to actually + * enable the PLL. + */ +bool intel_ddi_pll_select(struct intel_crtc *intel_crtc) +{ + struct drm_crtc *crtc = &intel_crtc->base; struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); struct drm_encoder *encoder = &intel_encoder->base; struct drm_i915_private *dev_priv = crtc->dev->dev_private; struct intel_ddi_plls *plls = &dev_priv->ddi_plls; int type = intel_encoder->type; enum pipe pipe = intel_crtc->pipe; - uint32_t reg, val; - - /* TODO: reuse PLLs when possible (compare values) */ + int clock = intel_crtc->config.port_clock; intel_ddi_put_crtc_pll(crtc); @@ -859,66 +778,145 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) return false; } - /* We don't need to turn any PLL on because we'll use LCPLL. */ - return true; - } else if (type == INTEL_OUTPUT_HDMI) { - int p, n2, r2; + uint32_t reg, val; + unsigned p, n2, r2; - if (plls->wrpll1_refcount == 0) { + intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); + + val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 | + WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | + WRPLL_DIVIDER_POST(p); + + if (val == I915_READ(WRPLL_CTL1)) { + DRM_DEBUG_KMS("Reusing WRPLL 1 on pipe %c\n", + pipe_name(pipe)); + reg = WRPLL_CTL1; + } else if (val == I915_READ(WRPLL_CTL2)) { + DRM_DEBUG_KMS("Reusing WRPLL 2 on pipe %c\n", + pipe_name(pipe)); + reg = WRPLL_CTL2; + } else if (plls->wrpll1_refcount == 0) { DRM_DEBUG_KMS("Using WRPLL 1 on pipe %c\n", pipe_name(pipe)); - plls->wrpll1_refcount++; reg = WRPLL_CTL1; - intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1; } else if (plls->wrpll2_refcount == 0) { DRM_DEBUG_KMS("Using WRPLL 2 on pipe %c\n", pipe_name(pipe)); - plls->wrpll2_refcount++; reg = WRPLL_CTL2; - intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL2; } else { DRM_ERROR("No WRPLLs available!\n"); return false; } - WARN(I915_READ(reg) & WRPLL_PLL_ENABLE, - "WRPLL already enabled\n"); + DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n", + clock, p, n2, r2); - intel_ddi_calculate_wrpll(clock, &p, &n2, &r2); - - val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 | - WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | - WRPLL_DIVIDER_POST(p); + if (reg == WRPLL_CTL1) { + plls->wrpll1_refcount++; + intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1; + } else { + plls->wrpll2_refcount++; + intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL2; + } } else if (type == INTEL_OUTPUT_ANALOG) { if (plls->spll_refcount == 0) { DRM_DEBUG_KMS("Using SPLL on pipe %c\n", pipe_name(pipe)); plls->spll_refcount++; - reg = SPLL_CTL; intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL; } else { DRM_ERROR("SPLL already in use\n"); return false; } - WARN(I915_READ(reg) & SPLL_PLL_ENABLE, - "SPLL already enabled\n"); - - val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC; - } else { WARN(1, "Invalid DDI encoder type %d\n", type); return false; } - I915_WRITE(reg, val); - udelay(20); - return true; } +/* + * To be called after intel_ddi_pll_select(). That one selects the PLL to be + * used, this one actually enables the PLL. + */ +void intel_ddi_pll_enable(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_ddi_plls *plls = &dev_priv->ddi_plls; + int clock = crtc->config.port_clock; + uint32_t reg, cur_val, new_val; + int refcount; + const char *pll_name; + uint32_t enable_bit = (1 << 31); + unsigned int p, n2, r2; + + BUILD_BUG_ON(enable_bit != SPLL_PLL_ENABLE); + BUILD_BUG_ON(enable_bit != WRPLL_PLL_ENABLE); + + switch (crtc->ddi_pll_sel) { + case PORT_CLK_SEL_LCPLL_2700: + case PORT_CLK_SEL_LCPLL_1350: + case PORT_CLK_SEL_LCPLL_810: + /* + * LCPLL should always be enabled at this point of the mode set + * sequence, so nothing to do. + */ + return; + + case PORT_CLK_SEL_SPLL: + pll_name = "SPLL"; + reg = SPLL_CTL; + refcount = plls->spll_refcount; + new_val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | + SPLL_PLL_SSC; + break; + + case PORT_CLK_SEL_WRPLL1: + case PORT_CLK_SEL_WRPLL2: + if (crtc->ddi_pll_sel == PORT_CLK_SEL_WRPLL1) { + pll_name = "WRPLL1"; + reg = WRPLL_CTL1; + refcount = plls->wrpll1_refcount; + } else { + pll_name = "WRPLL2"; + reg = WRPLL_CTL2; + refcount = plls->wrpll2_refcount; + } + + intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); + + new_val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 | + WRPLL_DIVIDER_REFERENCE(r2) | + WRPLL_DIVIDER_FEEDBACK(n2) | WRPLL_DIVIDER_POST(p); + + break; + + case PORT_CLK_SEL_NONE: + WARN(1, "Bad selected pll: PORT_CLK_SEL_NONE\n"); + return; + default: + WARN(1, "Bad selected pll: 0x%08x\n", crtc->ddi_pll_sel); + return; + } + + cur_val = I915_READ(reg); + + WARN(refcount < 1, "Bad %s refcount: %d\n", pll_name, refcount); + if (refcount == 1) { + WARN(cur_val & enable_bit, "%s already enabled\n", pll_name); + I915_WRITE(reg, new_val); + POSTING_READ(reg); + udelay(20); + } else { + WARN((cur_val & enable_bit) == 0, "%s disabled\n", pll_name); + } +} + void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; @@ -956,7 +954,8 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); struct drm_encoder *encoder = &intel_encoder->base; - struct drm_i915_private *dev_priv = crtc->dev->dev_private; + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe = intel_crtc->pipe; enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; enum port port = intel_ddi_get_encoder_port(intel_encoder); @@ -984,18 +983,19 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) BUG(); } - if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) + if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) temp |= TRANS_DDI_PVSYNC; - if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) + if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DDI_PHSYNC; if (cpu_transcoder == TRANSCODER_EDP) { switch (pipe) { case PIPE_A: - /* Can only use the always-on power well for eDP when - * not using the panel fitter, and when not using motion - * blur mitigation (which we don't support). */ - if (dev_priv->pch_pf_size) + /* On Haswell, can only use the always-on power well for + * eDP when not using the panel fitter, and when not + * using motion blur mitigation (which we don't + * support). */ + if (IS_HASWELL(dev) && intel_crtc->config.pch_pfit.enabled) temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; else temp |= TRANS_DDI_EDP_INPUT_A_ON; @@ -1013,16 +1013,14 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) } if (type == INTEL_OUTPUT_HDMI) { - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); - - if (intel_hdmi->has_hdmi_sink) + if (intel_crtc->config.has_hdmi_sink) temp |= TRANS_DDI_MODE_SELECT_HDMI; else temp |= TRANS_DDI_MODE_SELECT_DVI; } else if (type == INTEL_OUTPUT_ANALOG) { temp |= TRANS_DDI_MODE_SELECT_FDI; - temp |= (intel_crtc->fdi_lanes - 1) << 1; + temp |= (intel_crtc->config.fdi_lanes - 1) << 1; } else if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { @@ -1030,25 +1028,10 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) temp |= TRANS_DDI_MODE_SELECT_DP_SST; - switch (intel_dp->lane_count) { - case 1: - temp |= TRANS_DDI_PORT_WIDTH_X1; - break; - case 2: - temp |= TRANS_DDI_PORT_WIDTH_X2; - break; - case 4: - temp |= TRANS_DDI_PORT_WIDTH_X4; - break; - default: - temp |= TRANS_DDI_PORT_WIDTH_X4; - WARN(1, "Unsupported lane count %d\n", - intel_dp->lane_count); - } - + temp |= DDI_PORT_WIDTH(intel_dp->lane_count); } else { - WARN(1, "Invalid encoder type %d for pipe %d\n", - intel_encoder->type, pipe); + WARN(1, "Invalid encoder type %d for pipe %c\n", + intel_encoder->type, pipe_name(pipe)); } I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); @@ -1074,8 +1057,13 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) enum port port = intel_ddi_get_encoder_port(intel_encoder); enum pipe pipe = 0; enum transcoder cpu_transcoder; + enum intel_display_power_domain power_domain; uint32_t tmp; + power_domain = intel_display_port_power_domain(intel_encoder); + if (!intel_display_power_enabled(dev_priv, power_domain)) + return false; + if (!intel_encoder->get_hw_state(intel_encoder, &pipe)) return false; @@ -1111,9 +1099,14 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder, struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_ddi_get_encoder_port(encoder); + enum intel_display_power_domain power_domain; u32 tmp; int i; + power_domain = intel_display_port_power_domain(encoder); + if (!intel_display_power_enabled(dev_priv, power_domain)) + return false; + tmp = I915_READ(DDI_BUF_CTL(port)); if (!(tmp & DDI_BUF_CTL_ENABLE)) @@ -1148,7 +1141,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder, } } - DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port); + DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); return false; } @@ -1193,12 +1186,18 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev) enum pipe pipe; struct intel_crtc *intel_crtc; + dev_priv->ddi_plls.spll_refcount = 0; + dev_priv->ddi_plls.wrpll1_refcount = 0; + dev_priv->ddi_plls.wrpll2_refcount = 0; + for_each_pipe(pipe) { intel_crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); - if (!intel_crtc->active) + if (!intel_crtc->active) { + intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE; continue; + } intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv, pipe); @@ -1243,30 +1242,48 @@ void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) { struct drm_encoder *encoder = &intel_encoder->base; - struct drm_crtc *crtc = encoder->crtc; struct drm_i915_private *dev_priv = encoder->dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; + if (crtc->config.has_audio) { + DRM_DEBUG_DRIVER("Audio on pipe %c on DDI\n", + pipe_name(crtc->pipe)); + + /* write eld */ + DRM_DEBUG_DRIVER("DDI audio: write eld information\n"); + intel_write_eld(encoder, &crtc->config.adjusted_mode); + } + if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - ironlake_edp_panel_vdd_on(intel_dp); - ironlake_edp_panel_on(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, true); + intel_edp_panel_on(intel_dp); } - WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE); - I915_WRITE(PORT_CLK_SEL(port), intel_crtc->ddi_pll_sel); + WARN_ON(crtc->ddi_pll_sel == PORT_CLK_SEL_NONE); + I915_WRITE(PORT_CLK_SEL(port), crtc->ddi_pll_sel); if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_digital_port *intel_dig_port = + enc_to_dig_port(encoder); + + intel_dp->DP = intel_dig_port->saved_port_bits | + DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW; + intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); if (port != PORT_A) intel_dp_stop_link_train(intel_dp); + } else if (type == INTEL_OUTPUT_HDMI) { + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + + intel_hdmi->set_infoframes(encoder, + crtc->config.has_hdmi_sink, + &crtc->config.adjusted_mode); } } @@ -1294,10 +1311,11 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) if (wait) intel_wait_ddi_buf_idle(dev_priv, port); - if (type == INTEL_OUTPUT_EDP) { + if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - ironlake_edp_panel_vdd_on(intel_dp); - ironlake_edp_panel_off(intel_dp); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_edp_panel_vdd_on(intel_dp); + intel_edp_panel_off(intel_dp); } I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); @@ -1324,17 +1342,20 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder) * enabling the port. */ I915_WRITE(DDI_BUF_CTL(port), - intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE); + intel_dig_port->saved_port_bits | + DDI_BUF_CTL_ENABLE); } else if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); if (port == PORT_A) intel_dp_stop_link_train(intel_dp); - ironlake_edp_backlight_on(intel_dp); + intel_edp_backlight_on(intel_dp); + intel_edp_psr_enable(intel_dp); } - if (intel_crtc->eld_vld) { + if (intel_crtc->config.has_audio) { + intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4)); I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); @@ -1352,28 +1373,49 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder) struct drm_i915_private *dev_priv = dev->dev_private; uint32_t tmp; - tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); - tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4)); - I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); + /* We can't touch HSW_AUD_PIN_ELD_CP_VLD uncionditionally because this + * register is part of the power well on Haswell. */ + if (intel_crtc->config.has_audio) { + tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); + tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << + (pipe * 4)); + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); + intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); + } if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - ironlake_edp_backlight_off(intel_dp); + intel_edp_psr_disable(intel_dp); + intel_edp_backlight_off(intel_dp); } } int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv) { - if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT) - return 450; - else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) == - LCPLL_CLK_FREQ_450) - return 450; - else if (IS_ULT(dev_priv->dev)) - return 338; - else - return 540; + struct drm_device *dev = dev_priv->dev; + uint32_t lcpll = I915_READ(LCPLL_CTL); + uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; + + if (lcpll & LCPLL_CD_SOURCE_FCLK) { + return 800000; + } else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) { + return 450000; + } else if (freq == LCPLL_CLK_FREQ_450) { + return 450000; + } else if (IS_HASWELL(dev)) { + if (IS_ULT(dev)) + return 337500; + else + return 540000; + } else { + if (freq == LCPLL_CLK_FREQ_54O_BDW) + return 540000; + else if (freq == LCPLL_CLK_FREQ_337_5_BDW) + return 337500; + else + return 675000; + } } void intel_ddi_pll_init(struct drm_device *dev) @@ -1386,7 +1428,7 @@ void intel_ddi_pll_init(struct drm_device *dev) * Don't even try to turn it on. */ - DRM_DEBUG_KMS("CDCLK running at %dMHz\n", + DRM_DEBUG_KMS("CDCLK running at %dKHz\n", intel_ddi_get_cdclk_freq(dev_priv)); if (val & LCPLL_CD_SOURCE_FCLK) @@ -1425,7 +1467,7 @@ void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder) val = DP_TP_CTL_ENABLE | DP_TP_CTL_MODE_SST | DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; - if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; I915_WRITE(DP_TP_CTL(port), val); POSTING_READ(DP_TP_CTL(port)); @@ -1472,6 +1514,87 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder) intel_dp_check_link_status(intel_dp); } +void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; + u32 temp, flags = 0; + + temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + if (temp & TRANS_DDI_PHSYNC) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + if (temp & TRANS_DDI_PVSYNC) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + + pipe_config->adjusted_mode.flags |= flags; + + switch (temp & TRANS_DDI_BPC_MASK) { + case TRANS_DDI_BPC_6: + pipe_config->pipe_bpp = 18; + break; + case TRANS_DDI_BPC_8: + pipe_config->pipe_bpp = 24; + break; + case TRANS_DDI_BPC_10: + pipe_config->pipe_bpp = 30; + break; + case TRANS_DDI_BPC_12: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } + + switch (temp & TRANS_DDI_MODE_SELECT_MASK) { + case TRANS_DDI_MODE_SELECT_HDMI: + pipe_config->has_hdmi_sink = true; + case TRANS_DDI_MODE_SELECT_DVI: + case TRANS_DDI_MODE_SELECT_FDI: + break; + case TRANS_DDI_MODE_SELECT_DP_SST: + case TRANS_DDI_MODE_SELECT_DP_MST: + pipe_config->has_dp_encoder = true; + intel_dp_get_m_n(intel_crtc, pipe_config); + break; + default: + break; + } + + if (intel_display_power_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); + if (temp & (AUDIO_OUTPUT_ENABLE_A << (intel_crtc->pipe * 4))) + pipe_config->has_audio = true; + } + + if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp_bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); + dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; + } + + intel_ddi_clock_get(encoder, pipe_config); +} + static void intel_ddi_destroy(struct drm_encoder *encoder) { /* HDMI has nothing special to destroy, so we can go with this. */ @@ -1482,9 +1605,13 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) { int type = encoder->type; + int port = intel_ddi_get_encoder_port(encoder); WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); + if (port == PORT_A) + pipe_config->cpu_transcoder = TRANSCODER_EDP; + if (type == INTEL_OUTPUT_HDMI) return intel_hdmi_compute_config(encoder, pipe_config); else @@ -1495,9 +1622,40 @@ static const struct drm_encoder_funcs intel_ddi_funcs = { .destroy = intel_ddi_destroy, }; -static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = { - .mode_set = intel_ddi_mode_set, -}; +static struct intel_connector * +intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) +{ + struct intel_connector *connector; + enum port port = intel_dig_port->port; + + connector = kzalloc(sizeof(*connector), GFP_KERNEL); + if (!connector) + return NULL; + + intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); + if (!intel_dp_init_connector(intel_dig_port, connector)) { + kfree(connector); + return NULL; + } + + return connector; +} + +static struct intel_connector * +intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) +{ + struct intel_connector *connector; + enum port port = intel_dig_port->port; + + connector = kzalloc(sizeof(*connector), GFP_KERNEL); + if (!connector) + return NULL; + + intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); + intel_hdmi_init_connector(intel_dig_port, connector); + + return connector; +} void intel_ddi_init(struct drm_device *dev, enum port port) { @@ -1507,33 +1665,27 @@ void intel_ddi_init(struct drm_device *dev, enum port port) struct drm_encoder *encoder; struct intel_connector *hdmi_connector = NULL; struct intel_connector *dp_connector = NULL; + bool init_hdmi, init_dp; + + init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi || + dev_priv->vbt.ddi_port_info[port].supports_hdmi); + init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp; + if (!init_dp && !init_hdmi) { + DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible\n", + port_name(port)); + init_hdmi = true; + init_dp = true; + } - intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL); + intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); if (!intel_dig_port) return; - dp_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); - if (!dp_connector) { - kfree(intel_dig_port); - return; - } - - if (port != PORT_A) { - hdmi_connector = kzalloc(sizeof(struct intel_connector), - GFP_KERNEL); - if (!hdmi_connector) { - kfree(dp_connector); - kfree(intel_dig_port); - return; - } - } - intel_encoder = &intel_dig_port->base; encoder = &intel_encoder->base; drm_encoder_init(dev, encoder, &intel_ddi_funcs, DRM_MODE_ENCODER_TMDS); - drm_encoder_helper_add(encoder, &intel_ddi_helper_funcs); intel_encoder->compute_config = intel_ddi_compute_config; intel_encoder->enable = intel_enable_ddi; @@ -1541,20 +1693,28 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->disable = intel_disable_ddi; intel_encoder->post_disable = intel_ddi_post_disable; intel_encoder->get_hw_state = intel_ddi_get_hw_state; + intel_encoder->get_config = intel_ddi_get_config; intel_dig_port->port = port; - intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) & - DDI_BUF_PORT_REVERSAL; - if (hdmi_connector) - intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); - intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); + intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & + (DDI_BUF_PORT_REVERSAL | + DDI_A_4_LANES); intel_encoder->type = INTEL_OUTPUT_UNKNOWN; intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); - intel_encoder->cloneable = false; + intel_encoder->cloneable = 0; intel_encoder->hot_plug = intel_ddi_hot_plug; - if (hdmi_connector) - intel_hdmi_init_connector(intel_dig_port, hdmi_connector); - intel_dp_init_connector(intel_dig_port, dp_connector); + if (init_dp) + dp_connector = intel_ddi_init_dp_connector(intel_dig_port); + + /* In theory we don't need the encoder->type check, but leave it just in + * case we have some really bad VBTs... */ + if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) + hdmi_connector = intel_ddi_init_hdmi_connector(intel_dig_port); + + if (!dp_connector && !hdmi_connector) { + drm_encoder_cleanup(encoder); + kfree(intel_dig_port); + } } |