1 files changed, 206 insertions, 120 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9293878ec7e..5a045d3bd77 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -45,19 +45,21 @@
 
 struct intel_crt {
 	struct intel_encoder base;
+	/* DPMS state is stored in the connector, which we need in the
+	 * encoder's enable/disable callbacks */
+	struct intel_connector *connector;
 	bool force_hotplug_required;
 	u32 adpa_reg;
 };
 
-static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
 {
-	return container_of(intel_attached_encoder(connector),
-			    struct intel_crt, base);
+	return container_of(encoder, struct intel_crt, base);
 }
 
-static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
 {
-	return container_of(encoder, struct intel_crt, base);
+	return intel_encoder_to_crt(intel_attached_encoder(connector));
 }
 
 static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
@@ -66,8 +68,13 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(crt->adpa_reg);
 
 	if (!(tmp & ADPA_DAC_ENABLE))
@@ -81,27 +88,53 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
-static void intel_disable_crt(struct intel_encoder *encoder)
+static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-	u32 temp;
+	u32 tmp, flags = 0;
+
+	tmp = I915_READ(crt->adpa_reg);
+
+	if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NVSYNC;
 
-	temp = I915_READ(crt->adpa_reg);
-	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
-	I915_WRITE(crt->adpa_reg, temp);
+	return flags;
 }
 
-static void intel_enable_crt(struct intel_encoder *encoder)
+static void intel_crt_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config)
 {
-	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
-	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-	u32 temp;
+	struct drm_device *dev = encoder->base.dev;
+	int dotclock;
+
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+
+	dotclock = pipe_config->port_clock;
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
 
-	temp = I915_READ(crt->adpa_reg);
-	temp |= ADPA_DAC_ENABLE;
-	I915_WRITE(crt->adpa_reg, temp);
+	pipe_config->adjusted_mode.crtc_clock = dotclock;
+}
+
+static void hsw_crt_get_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
+{
+	intel_ddi_get_config(encoder, pipe_config);
+
+	pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+					      DRM_MODE_FLAG_NHSYNC |
+					      DRM_MODE_FLAG_PVSYNC |
+					      DRM_MODE_FLAG_NVSYNC);
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
 /* Note: The caller is required to filter out dpms modes not supported by the
@@ -111,30 +144,64 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-	u32 temp;
+	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
+	u32 adpa;
+
+	if (INTEL_INFO(dev)->gen >= 5)
+		adpa = ADPA_HOTPLUG_BITS;
+	else
+		adpa = 0;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	/* For CPT allow 3 pipe config, for others just use A or B */
+	if (HAS_PCH_LPT(dev))
+		; /* Those bits don't exist here */
+	else if (HAS_PCH_CPT(dev))
+		adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
+	else if (crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
 
-	temp = I915_READ(crt->adpa_reg);
-	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(BCLRPAT(crtc->pipe), 0);
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
-		temp |= ADPA_DAC_ENABLE;
+		adpa |= ADPA_DAC_ENABLE;
 		break;
 	case DRM_MODE_DPMS_STANDBY:
-		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_SUSPEND:
-		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_OFF:
-		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	}
 
-	I915_WRITE(crt->adpa_reg, temp);
+	I915_WRITE(crt->adpa_reg, adpa);
+}
+
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
 }
 
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+/* Special dpms function to support cloning between dvo/sdvo/crt. */
 static void intel_crt_dpms(struct drm_connector *connector, int mode)
 {
 	struct drm_device *dev = connector->dev;
@@ -165,6 +232,8 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode)
 	else
 		encoder->connectors_active = true;
 
+	/* We call connector dpms manually below in case pipe dpms doesn't
+	 * change due to cloning. */
 	if (mode < old_dpms) {
 		/* From off to on, enable the pipe first. */
 		intel_crtc_update_dpms(crtc);
@@ -179,8 +248,9 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode)
 	intel_modeset_check_state(connector->dev);
 }
 
-static int intel_crt_mode_valid(struct drm_connector *connector,
-				struct drm_display_mode *mode)
+static enum drm_mode_status
+intel_crt_mode_valid(struct drm_connector *connector,
+		     struct drm_display_mode *mode)
 {
 	struct drm_device *dev = connector->dev;
 
@@ -206,50 +276,23 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
-{
-	return true;
-}
-
-static void intel_crt_mode_set(struct drm_encoder *encoder,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode)
+static bool intel_crt_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
-
-	struct drm_device *dev = encoder->dev;
-	struct drm_crtc *crtc = encoder->crtc;
-	struct intel_crt *crt =
-		intel_encoder_to_crt(to_intel_encoder(encoder));
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 adpa;
+	struct drm_device *dev = encoder->base.dev;
 
 	if (HAS_PCH_SPLIT(dev))
-		adpa = ADPA_HOTPLUG_BITS;
-	else
-		adpa = 0;
+		pipe_config->has_pch_encoder = true;
 
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
-
-	/* For CPT allow 3 pipe config, for others just use A or B */
+	/* LPT FDI RX only supports 8bpc. */
 	if (HAS_PCH_LPT(dev))
-		; /* Those bits don't exist here */
-	else if (HAS_PCH_CPT(dev))
-		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
-	else if (intel_crtc->pipe == 0)
-		adpa |= ADPA_PIPE_A_SELECT;
-	else
-		adpa |= ADPA_PIPE_B_SELECT;
+		pipe_config->pipe_bpp = 24;
 
-	if (!HAS_PCH_SPLIT(dev))
-		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
+	/* FDI must always be 2.7 GHz */
+	if (HAS_DDI(dev))
+		pipe_config->port_clock = 135000 * 2;
 
-	I915_WRITE(crt->adpa_reg, adpa);
+	return true;
 }
 
 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
@@ -267,27 +310,27 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 
 		crt->force_hotplug_required = 0;
 
-		save_adpa = adpa = I915_READ(PCH_ADPA);
+		save_adpa = adpa = I915_READ(crt->adpa_reg);
 		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
 		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 		if (turn_off_dac)
 			adpa &= ~ADPA_DAC_ENABLE;
 
-		I915_WRITE(PCH_ADPA, adpa);
+		I915_WRITE(crt->adpa_reg, adpa);
 
-		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+		if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 			     1000))
 			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 
 		if (turn_off_dac) {
-			I915_WRITE(PCH_ADPA, save_adpa);
-			POSTING_READ(PCH_ADPA);
+			I915_WRITE(crt->adpa_reg, save_adpa);
+			POSTING_READ(crt->adpa_reg);
 		}
 	}
 
 	/* Check the status to see if both blue and green are on now */
-	adpa = I915_READ(PCH_ADPA);
+	adpa = I915_READ(crt->adpa_reg);
 	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
@@ -300,26 +343,27 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 adpa;
 	bool ret;
 	u32 save_adpa;
 
-	save_adpa = adpa = I915_READ(ADPA);
+	save_adpa = adpa = I915_READ(crt->adpa_reg);
 	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
 	adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 
-	I915_WRITE(ADPA, adpa);
+	I915_WRITE(crt->adpa_reg, adpa);
 
-	if (wait_for((I915_READ(ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+	if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 		     1000)) {
 		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-		I915_WRITE(ADPA, save_adpa);
+		I915_WRITE(crt->adpa_reg, save_adpa);
 	}
 
 	/* Check the status to see if both blue and green are on now */
-	adpa = I915_READ(ADPA);
+	adpa = I915_READ(crt->adpa_reg);
 	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
@@ -327,9 +371,6 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 
 	DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
 
-	/* FIXME: debug force function and remove */
-	ret = true;
-
 	return ret;
 }
 
@@ -433,7 +474,7 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 
 	BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
 
-	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
 	edid = intel_crt_get_edid(connector, i2c);
 
 	if (edid) {
@@ -583,9 +624,22 @@ static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
 	enum drm_connector_status status;
 	struct intel_load_detect_pipe tmp;
+	struct drm_modeset_acquire_ctx ctx;
+
+	intel_runtime_pm_get(dev_priv);
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
+		      connector->base.id, connector->name,
+		      force);
+
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
 
 	if (I915_HAS_HOTPLUG(dev)) {
 		/* We can not rely on the HPD pin always being correctly wired
@@ -594,40 +648,50 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		 */
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
-			return connector_status_connected;
+			status = connector_status_connected;
+			goto out;
 		} else
 			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 	}
 
-	if (intel_crt_detect_ddc(connector))
-		return connector_status_connected;
+	if (intel_crt_detect_ddc(connector)) {
+		status = connector_status_connected;
+		goto out;
+	}
 
 	/* Load detection is broken on HPD capable machines. Whoever wants a
 	 * broken monitor (without edid) to work behind a broken kvm (that fails
 	 * to have the right resistors for HP detection) needs to fix this up.
 	 * For now just bail out. */
-	if (I915_HAS_HOTPLUG(dev))
-		return connector_status_disconnected;
+	if (I915_HAS_HOTPLUG(dev)) {
+		status = connector_status_disconnected;
+		goto out;
+	}
 
-	if (!force)
-		return connector->status;
+	if (!force) {
+		status = connector->status;
+		goto out;
+	}
 
 	/* for pre-945g platforms use load detect */
-	if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
+	if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {
 		if (intel_crt_detect_ddc(connector))
 			status = connector_status_connected;
 		else
 			status = intel_crt_load_detect(crt);
-		intel_release_load_detect_pipe(connector, &tmp);
+		intel_release_load_detect_pipe(connector, &tmp, &ctx);
 	} else
 		status = connector_status_unknown;
 
+out:
+	intel_display_power_put(dev_priv, power_domain);
+	intel_runtime_pm_put(dev_priv);
+
 	return status;
 }
 
 static void intel_crt_destroy(struct drm_connector *connector)
 {
-	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
 	kfree(connector);
 }
@@ -636,17 +700,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
 	int ret;
 	struct i2c_adapter *i2c;
 
-	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
+
+	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
 	ret = intel_crt_ddc_get_modes(connector, i2c);
 	if (ret || !IS_G4X(dev))
-		return ret;
+		goto out;
 
 	/* Try to probe digital port for output in DVI-I -> VGA mode. */
 	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
-	return intel_crt_ddc_get_modes(connector, i2c);
+	ret = intel_crt_ddc_get_modes(connector, i2c);
+
+out:
+	intel_display_power_put(dev_priv, power_domain);
+
+	return ret;
 }
 
 static int intel_crt_set_property(struct drm_connector *connector,
@@ -662,14 +737,14 @@ static void intel_crt_reset(struct drm_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_attached_crt(connector);
 
-	if (HAS_PCH_SPLIT(dev)) {
+	if (INTEL_INFO(dev)->gen >= 5) {
 		u32 adpa;
 
-		adpa = I915_READ(PCH_ADPA);
+		adpa = I915_READ(crt->adpa_reg);
 		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 		adpa |= ADPA_HOTPLUG_BITS;
-		I915_WRITE(PCH_ADPA, adpa);
-		POSTING_READ(PCH_ADPA);
+		I915_WRITE(crt->adpa_reg, adpa);
+		POSTING_READ(crt->adpa_reg);
 
 		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 		crt->force_hotplug_required = 1;
@@ -681,12 +756,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  * Routines for controlling stuff on the analog port
  */
 
-static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
-	.mode_set = intel_crt_mode_set,
-	.disable = intel_encoder_noop,
-};
-
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.reset = intel_crt_reset,
 	.dpms = intel_crt_dpms,
@@ -721,6 +790,14 @@ static const struct dmi_system_id intel_no_crt[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 		},
 	},
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "DELL XPS 8700",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 8700"),
+		},
+	},
 	{ }
 };
 
@@ -739,13 +816,14 @@ void intel_crt_init(struct drm_device *dev)
 	if (!crt)
 		return;
 
-	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
 		kfree(crt);
 		return;
 	}
 
 	connector = &intel_connector->base;
+	crt->connector = intel_connector;
 	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
@@ -755,7 +833,7 @@ void intel_crt_init(struct drm_device *dev)
 	intel_connector_attach_encoder(intel_connector, &crt->base);
 
 	crt->base.type = INTEL_OUTPUT_ANALOG;
-	crt->base.cloneable = true;
+	crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
 	if (IS_I830(dev))
 		crt->base.crtc_mask = (1 << 0);
 	else
@@ -774,36 +852,44 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		crt->adpa_reg = ADPA;
 
+	crt->base.compute_config = intel_crt_compute_config;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
-	if (IS_HASWELL(dev))
+	if (I915_HAS_HOTPLUG(dev))
+		crt->base.hpd_pin = HPD_CRT;
+	if (HAS_DDI(dev)) {
+		crt->base.get_config = hsw_crt_get_config;
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
-	else
+	} else {
+		crt->base.get_config = intel_crt_get_config;
 		crt->base.get_hw_state = intel_crt_get_hw_state;
+	}
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
+	intel_connector->unregister = intel_connector_unregister;
 
-	drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);
 
-	if (I915_HAS_HOTPLUG(dev))
-		connector->polled = DRM_CONNECTOR_POLL_HPD;
-	else
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	if (!I915_HAS_HOTPLUG(dev))
+		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	/*
 	 * Configure the automatic hotplug detection stuff
 	 */
 	crt->force_hotplug_required = 0;
 
-	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
-
 	/*
-	 * TODO: find a proper way to discover whether we need to set the
-	 * polarity reversal bit or not, instead of relying on the BIOS.
+	 * TODO: find a proper way to discover whether we need to set the the
+	 * polarity and link reversal bits or not, instead of relying on the
+	 * BIOS.
 	 */
-	if (HAS_PCH_LPT(dev))
-		dev_priv->fdi_rx_polarity_reversed =
-		     !!(I915_READ(_FDI_RXA_CTL) & FDI_RX_POLARITY_REVERSED_LPT);
+	if (HAS_PCH_LPT(dev)) {
+		u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
+				 FDI_RX_LINK_REVERSAL_OVERRIDE;
+
+		dev_priv->fdi_rx_config = I915_READ(_FDI_RXA_CTL) & fdi_config;
+	}
+
+	intel_crt_reset(connector);
 }