1 files changed, 569 insertions, 227 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ddefc871edf..5a045d3bd77 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -24,50 +24,233 @@
  *	Eric Anholt <eric@anholt.net>
  */
 
+#include <linux/dmi.h>
 #include <linux/i2c.h>
-#include "drmP.h"
-#include "drm.h"
-#include "drm_crtc.h"
-#include "drm_crtc_helper.h"
+#include <linux/slab.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
 #include "intel_drv.h"
-#include "i915_drm.h"
+#include <drm/i915_drm.h>
 #include "i915_drv.h"
 
-static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
+			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
+			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
+			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
+			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
+			   ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+	struct intel_encoder base;
+	/* DPMS state is stored in the connector, which we need in the
+	 * encoder's enable/disable callbacks */
+	struct intel_connector *connector;
+	bool force_hotplug_required;
+	u32 adpa_reg;
+};
+
+static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
+{
+	return container_of(encoder, struct intel_crt, base);
+}
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+	return intel_encoder_to_crt(intel_attached_encoder(connector));
+}
+
+static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	enum intel_display_power_domain power_domain;
+	u32 tmp;
+
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
+	tmp = I915_READ(crt->adpa_reg);
+
+	if (!(tmp & ADPA_DAC_ENABLE))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	u32 tmp, flags = 0;
+
+	tmp = I915_READ(crt->adpa_reg);
+
+	if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
+		flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		flags |= DRM_MODE_FLAG_NVSYNC;
+
+	return flags;
+}
+
+static void intel_crt_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = encoder->base.dev;
+	int dotclock;
+
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+
+	dotclock = pipe_config->port_clock;
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.crtc_clock = dotclock;
+}
+
+static void hsw_crt_get_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
+{
+	intel_ddi_get_config(encoder, pipe_config);
+
+	pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+					      DRM_MODE_FLAG_NHSYNC |
+					      DRM_MODE_FLAG_PVSYNC |
+					      DRM_MODE_FLAG_NVSYNC);
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+}
+
+/* Note: The caller is required to filter out dpms modes not supported by the
+ * platform. */
+static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 temp, reg;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
+	u32 adpa;
+
+	if (INTEL_INFO(dev)->gen >= 5)
+		adpa = ADPA_HOTPLUG_BITS;
+	else
+		adpa = 0;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 
-	if (IS_IRONLAKE(dev))
-		reg = PCH_ADPA;
+	/* For CPT allow 3 pipe config, for others just use A or B */
+	if (HAS_PCH_LPT(dev))
+		; /* Those bits don't exist here */
+	else if (HAS_PCH_CPT(dev))
+		adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
+	else if (crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
 	else
-		reg = ADPA;
+		adpa |= ADPA_PIPE_B_SELECT;
 
-	temp = I915_READ(reg);
-	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(BCLRPAT(crtc->pipe), 0);
 
-	switch(mode) {
+	switch (mode) {
 	case DRM_MODE_DPMS_ON:
-		temp |= ADPA_DAC_ENABLE;
+		adpa |= ADPA_DAC_ENABLE;
 		break;
 	case DRM_MODE_DPMS_STANDBY:
-		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_SUSPEND:
-		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	case DRM_MODE_DPMS_OFF:
-		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	}
 
-	I915_WRITE(reg, temp);
+	I915_WRITE(crt->adpa_reg, adpa);
+}
+
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+/* Special dpms function to support cloning between dvo/sdvo/crt. */
+static void intel_crt_dpms(struct drm_connector *connector, int mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct drm_crtc *crtc;
+	int old_dpms;
+
+	/* PCH platforms and VLV only support on/off. */
+	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	old_dpms = connector->dpms;
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = encoder->base.crtc;
+	if (!crtc) {
+		encoder->connectors_active = false;
+		return;
+	}
+
+	/* We need the pipe to run for anything but OFF. */
+	if (mode == DRM_MODE_DPMS_OFF)
+		encoder->connectors_active = false;
+	else
+		encoder->connectors_active = true;
+
+	/* We call connector dpms manually below in case pipe dpms doesn't
+	 * change due to cloning. */
+	if (mode < old_dpms) {
+		/* From off to on, enable the pipe first. */
+		intel_crtc_update_dpms(crtc);
+
+		intel_crt_set_dpms(encoder, mode);
+	} else {
+		intel_crt_set_dpms(encoder, mode);
+
+		intel_crtc_update_dpms(crtc);
+	}
+
+	intel_modeset_check_state(connector->dev);
 }
 
-static int intel_crt_mode_valid(struct drm_connector *connector,
-				struct drm_display_mode *mode)
+static enum drm_mode_status
+intel_crt_mode_valid(struct drm_connector *connector,
+		     struct drm_display_mode *mode)
 {
 	struct drm_device *dev = connector->dev;
 
@@ -78,109 +261,116 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 	if (mode->clock < 25000)
 		return MODE_CLOCK_LOW;
 
-	if (!IS_I9XX(dev))
+	if (IS_GEN2(dev))
 		max_clock = 350000;
 	else
 		max_clock = 400000;
 	if (mode->clock > max_clock)
 		return MODE_CLOCK_HIGH;
 
+	/* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
+	if (HAS_PCH_LPT(dev) &&
+	    (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))
+		return MODE_CLOCK_HIGH;
+
 	return MODE_OK;
 }
 
-static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_crt_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
+
+	if (HAS_PCH_SPLIT(dev))
+		pipe_config->has_pch_encoder = true;
+
+	/* LPT FDI RX only supports 8bpc. */
+	if (HAS_PCH_LPT(dev))
+		pipe_config->pipe_bpp = 24;
+
+	/* FDI must always be 2.7 GHz */
+	if (HAS_DDI(dev))
+		pipe_config->port_clock = 135000 * 2;
+
 	return true;
 }
 
-static void intel_crt_mode_set(struct drm_encoder *encoder,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode)
+static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 {
-
-	struct drm_device *dev = encoder->dev;
-	struct drm_crtc *crtc = encoder->crtc;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int dpll_md_reg;
-	u32 adpa, dpll_md;
-	u32 adpa_reg;
+	u32 adpa;
+	bool ret;
 
-	if (intel_crtc->pipe == 0)
-		dpll_md_reg = DPLL_A_MD;
-	else
-		dpll_md_reg = DPLL_B_MD;
+	/* The first time through, trigger an explicit detection cycle */
+	if (crt->force_hotplug_required) {
+		bool turn_off_dac = HAS_PCH_SPLIT(dev);
+		u32 save_adpa;
 
-	if (IS_IRONLAKE(dev))
-		adpa_reg = PCH_ADPA;
-	else
-		adpa_reg = ADPA;
+		crt->force_hotplug_required = 0;
 
-	/*
-	 * Disable separate mode multiplier used when cloning SDVO to CRT
-	 * XXX this needs to be adjusted when we really are cloning
-	 */
-	if (IS_I965G(dev) && !IS_IRONLAKE(dev)) {
-		dpll_md = I915_READ(dpll_md_reg);
-		I915_WRITE(dpll_md_reg,
-			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
-	}
+		save_adpa = adpa = I915_READ(crt->adpa_reg);
+		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
-	adpa = 0;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+		if (turn_off_dac)
+			adpa &= ~ADPA_DAC_ENABLE;
 
-	if (intel_crtc->pipe == 0) {
-		adpa |= ADPA_PIPE_A_SELECT;
-		if (!IS_IRONLAKE(dev))
-			I915_WRITE(BCLRPAT_A, 0);
-	} else {
-		adpa |= ADPA_PIPE_B_SELECT;
-		if (!IS_IRONLAKE(dev))
-			I915_WRITE(BCLRPAT_B, 0);
+		I915_WRITE(crt->adpa_reg, adpa);
+
+		if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+		if (turn_off_dac) {
+			I915_WRITE(crt->adpa_reg, save_adpa);
+			POSTING_READ(crt->adpa_reg);
+		}
 	}
 
-	I915_WRITE(adpa_reg, adpa);
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(crt->adpa_reg);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
+		ret = true;
+	else
+		ret = false;
+	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
+
+	return ret;
 }
 
-static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
+static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 adpa;
 	bool ret;
+	u32 save_adpa;
 
-	adpa = I915_READ(PCH_ADPA);
-
-	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+	save_adpa = adpa = I915_READ(crt->adpa_reg);
+	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
-	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
-			ADPA_CRT_HOTPLUG_WARMUP_10MS |
-			ADPA_CRT_HOTPLUG_SAMPLE_4S |
-			ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
-			ADPA_CRT_HOTPLUG_VOLREF_325MV |
-			ADPA_CRT_HOTPLUG_ENABLE |
-			ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
+	adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 
-	DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
-	I915_WRITE(PCH_ADPA, adpa);
+	I915_WRITE(crt->adpa_reg, adpa);
 
-	while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
-		;
+	if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+		     1000)) {
+		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+		I915_WRITE(crt->adpa_reg, save_adpa);
+	}
 
 	/* Check the status to see if both blue and green are on now */
-	adpa = I915_READ(PCH_ADPA);
-	adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
-	if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
-		(adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+	adpa = I915_READ(crt->adpa_reg);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
 		ret = false;
 
+	DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
+
 	return ret;
 }
 
@@ -196,12 +386,16 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 hotplug_en;
+	u32 hotplug_en, orig, stat;
+	bool ret = false;
 	int i, tries = 0;
 
-	if (IS_IRONLAKE(dev))
+	if (HAS_PCH_SPLIT(dev))
 		return intel_ironlake_crt_detect_hotplug(connector);
 
+	if (IS_VALLEYVIEW(dev))
+		return valleyview_crt_detect_hotplug(connector);
+
 	/*
 	 * On 4 series desktop, CRT detect sequence need to be done twice
 	 * to get a reliable result.
@@ -211,55 +405,107 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 		tries = 2;
 	else
 		tries = 1;
-	hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
+	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_G4X(dev))
-		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-
-	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
 	for (i = 0; i < tries ; i++) {
-		unsigned long timeout;
 		/* turn on the FORCE_DETECT */
 		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-		timeout = jiffies + msecs_to_jiffies(1000);
 		/* wait for FORCE_DETECT to go off */
-		do {
-			if (!(I915_READ(PORT_HOTPLUG_EN) &
-					CRT_HOTPLUG_FORCE_DETECT))
-				break;
-			msleep(1);
-		} while (time_after(timeout, jiffies));
+		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
+			      CRT_HOTPLUG_FORCE_DETECT) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
-	    CRT_HOTPLUG_MONITOR_NONE)
-		return true;
+	stat = I915_READ(PORT_HOTPLUG_STAT);
+	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* clear the interrupt we just generated, if any */
+	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 
-	return false;
+	/* and put the bits back */
+	I915_WRITE(PORT_HOTPLUG_EN, orig);
+
+	return ret;
+}
+
+static struct edid *intel_crt_get_edid(struct drm_connector *connector,
+				struct i2c_adapter *i2c)
+{
+	struct edid *edid;
+
+	edid = drm_get_edid(connector, i2c);
+
+	if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
+		DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
+		intel_gmbus_force_bit(i2c, true);
+		edid = drm_get_edid(connector, i2c);
+		intel_gmbus_force_bit(i2c, false);
+	}
+
+	return edid;
+}
+
+/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
+static int intel_crt_ddc_get_modes(struct drm_connector *connector,
+				struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+	int ret;
+
+	edid = intel_crt_get_edid(connector, adapter);
+	if (!edid)
+		return 0;
+
+	ret = intel_connector_update_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
 }
 
 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
+	struct edid *edid;
+	struct i2c_adapter *i2c;
 
-	/* CRT should always be at 0, but check anyway */
-	if (intel_output->type != INTEL_OUTPUT_ANALOG)
-		return false;
+	BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
+
+	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
+	edid = intel_crt_get_edid(connector, i2c);
+
+	if (edid) {
+		bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+
+		/*
+		 * This may be a DVI-I connector with a shared DDC
+		 * link between analog and digital outputs, so we
+		 * have to check the EDID input spec of the attached device.
+		 */
+		if (!is_digital) {
+			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+			return true;
+		}
 
-	return intel_ddc_probe(intel_output);
+		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+	} else {
+		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
+	}
+
+	kfree(edid);
+
+	return false;
 }
 
 static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+intel_crt_load_detect(struct intel_crt *crt)
 {
-	struct drm_encoder *encoder = &intel_output->enc;
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = crt->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	uint32_t pipe = intel_crtc->pipe;
+	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 	uint32_t save_bclrpat;
 	uint32_t save_vtotal;
 	uint32_t vtotal, vactive;
@@ -275,21 +521,14 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
 	uint8_t	st00;
 	enum drm_connector_status status;
 
-	if (pipe == 0) {
-		bclrpat_reg = BCLRPAT_A;
-		vtotal_reg = VTOTAL_A;
-		vblank_reg = VBLANK_A;
-		vsync_reg = VSYNC_A;
-		pipeconf_reg = PIPEACONF;
-		pipe_dsl_reg = PIPEADSL;
-	} else {
-		bclrpat_reg = BCLRPAT_B;
-		vtotal_reg = VTOTAL_B;
-		vblank_reg = VBLANK_B;
-		vsync_reg = VSYNC_B;
-		pipeconf_reg = PIPEBCONF;
-		pipe_dsl_reg = PIPEBDSL;
-	}
+	DRM_DEBUG_KMS("starting load-detect on CRT\n");
+
+	bclrpat_reg = BCLRPAT(pipe);
+	vtotal_reg = VTOTAL(pipe);
+	vblank_reg = VBLANK(pipe);
+	vsync_reg = VSYNC(pipe);
+	pipeconf_reg = PIPECONF(pipe);
+	pipe_dsl_reg = PIPEDSL(pipe);
 
 	save_bclrpat = I915_READ(bclrpat_reg);
 	save_vtotal = I915_READ(vtotal_reg);
@@ -304,12 +543,13 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
 	/* Set the border color to purple. */
 	I915_WRITE(bclrpat_reg, 0x500050);
 
-	if (IS_I9XX(dev)) {
+	if (!IS_GEN2(dev)) {
 		uint32_t pipeconf = I915_READ(pipeconf_reg);
 		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+		POSTING_READ(pipeconf_reg);
 		/* Wait for next Vblank to substitue
 		 * border color for Color info */
-		intel_wait_for_vblank(dev);
+		intel_wait_for_vblank(dev, pipe);
 		st00 = I915_READ8(VGA_MSR_WRITE);
 		status = ((st00 & (1 << 4)) != 0) ?
 			connector_status_connected :
@@ -380,81 +620,108 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
 	return status;
 }
 
-static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct drm_encoder *encoder = &intel_output->enc;
-	struct drm_crtc *crtc;
-	int dpms_mode;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
 	enum drm_connector_status status;
+	struct intel_load_detect_pipe tmp;
+	struct drm_modeset_acquire_ctx ctx;
 
-	if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
-		if (intel_crt_detect_hotplug(connector))
-			return connector_status_connected;
-		else
-			return connector_status_disconnected;
-	}
+	intel_runtime_pm_get(dev_priv);
 
-	if (intel_crt_detect_ddc(connector))
-		return connector_status_connected;
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
+		      connector->base.id, connector->name,
+		      force);
 
-	/* for pre-945g platforms use load detect */
-	if (encoder->crtc && encoder->crtc->enabled) {
-		status = intel_crt_load_detect(encoder->crtc, intel_output);
-	} else {
-		crtc = intel_get_load_detect_pipe(intel_output,
-						  NULL, &dpms_mode);
-		if (crtc) {
-			status = intel_crt_load_detect(crtc, intel_output);
-			intel_release_load_detect_pipe(intel_output, dpms_mode);
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		/* We can not rely on the HPD pin always being correctly wired
+		 * up, for example many KVM do not pass it through, and so
+		 * only trust an assertion that the monitor is connected.
+		 */
+		if (intel_crt_detect_hotplug(connector)) {
+			DRM_DEBUG_KMS("CRT detected via hotplug\n");
+			status = connector_status_connected;
+			goto out;
 		} else
-			status = connector_status_unknown;
+			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
+	}
+
+	if (intel_crt_detect_ddc(connector)) {
+		status = connector_status_connected;
+		goto out;
+	}
+
+	/* Load detection is broken on HPD capable machines. Whoever wants a
+	 * broken monitor (without edid) to work behind a broken kvm (that fails
+	 * to have the right resistors for HP detection) needs to fix this up.
+	 * For now just bail out. */
+	if (I915_HAS_HOTPLUG(dev)) {
+		status = connector_status_disconnected;
+		goto out;
 	}
 
+	if (!force) {
+		status = connector->status;
+		goto out;
+	}
+
+	/* for pre-945g platforms use load detect */
+	if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {
+		if (intel_crt_detect_ddc(connector))
+			status = connector_status_connected;
+		else
+			status = intel_crt_load_detect(crt);
+		intel_release_load_detect_pipe(connector, &tmp, &ctx);
+	} else
+		status = connector_status_unknown;
+
+out:
+	intel_display_power_put(dev_priv, power_domain);
+	intel_runtime_pm_put(dev_priv);
+
 	return status;
 }
 
 static void intel_crt_destroy(struct drm_connector *connector)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
-
-	intel_i2c_destroy(intel_output->ddc_bus);
-	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
 	kfree(connector);
 }
 
 static int intel_crt_get_modes(struct drm_connector *connector)
 {
-	int ret;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct i2c_adapter *ddcbus;
 	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
+	int ret;
+	struct i2c_adapter *i2c;
 
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
 
-	ret = intel_ddc_get_modes(intel_output);
+	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
+	ret = intel_crt_ddc_get_modes(connector, i2c);
 	if (ret || !IS_G4X(dev))
-		goto end;
+		goto out;
 
-	ddcbus = intel_output->ddc_bus;
 	/* Try to probe digital port for output in DVI-I -> VGA mode. */
-	intel_output->ddc_bus =
-		intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
-
-	if (!intel_output->ddc_bus) {
-		intel_output->ddc_bus = ddcbus;
-		dev_printk(KERN_ERR, &connector->dev->pdev->dev,
-			   "DDC bus registration failed for CRTDDC_D.\n");
-		goto end;
-	}
-	/* Try to get modes by GPIOD port */
-	ret = intel_ddc_get_modes(intel_output);
-	intel_i2c_destroy(ddcbus);
+	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
+	ret = intel_crt_ddc_get_modes(connector, i2c);
 
-end:
-	return ret;
+out:
+	intel_display_power_put(dev_priv, power_domain);
 
+	return ret;
 }
 
 static int intel_crt_set_property(struct drm_connector *connector,
@@ -464,20 +731,34 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
+static void intel_crt_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_attached_crt(connector);
+
+	if (INTEL_INFO(dev)->gen >= 5) {
+		u32 adpa;
+
+		adpa = I915_READ(crt->adpa_reg);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(crt->adpa_reg, adpa);
+		POSTING_READ(crt->adpa_reg);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+		crt->force_hotplug_required = 1;
+	}
+
+}
+
 /*
  * Routines for controlling stuff on the analog port
  */
 
-static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
-	.dpms = intel_crt_dpms,
-	.mode_fixup = intel_crt_mode_fixup,
-	.prepare = intel_encoder_prepare,
-	.commit = intel_encoder_commit,
-	.mode_set = intel_crt_mode_set,
-};
-
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.reset = intel_crt_reset,
+	.dpms = intel_crt_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
@@ -490,64 +771,125 @@ static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs
 	.best_encoder = intel_best_encoder,
 };
 
-static void intel_crt_enc_destroy(struct drm_encoder *encoder)
+static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
 {
-	drm_encoder_cleanup(encoder);
+	DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
+	return 1;
 }
 
-static const struct drm_encoder_funcs intel_crt_enc_funcs = {
-	.destroy = intel_crt_enc_destroy,
+static const struct dmi_system_id intel_no_crt[] = {
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "ACER ZGB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+		},
+	},
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "DELL XPS 8700",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 8700"),
+		},
+	},
+	{ }
 };
 
 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
-	struct intel_output *intel_output;
+	struct intel_crt *crt;
+	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 i2c_reg;
 
-	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
-	if (!intel_output)
+	/* Skip machines without VGA that falsely report hotplug events */
+	if (dmi_check_system(intel_no_crt))
+		return;
+
+	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+	if (!crt)
+		return;
+
+	intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(crt);
 		return;
+	}
 
-	connector = &intel_output->base;
-	drm_connector_init(dev, &intel_output->base,
+	connector = &intel_connector->base;
+	crt->connector = intel_connector;
+	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
-	drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 			 DRM_MODE_ENCODER_DAC);
 
-	drm_mode_connector_attach_encoder(&intel_output->base,
-					  &intel_output->enc);
-
-	/* Set up the DDC bus. */
-	if (IS_IRONLAKE(dev))
-		i2c_reg = PCH_GPIOA;
-	else {
-		i2c_reg = GPIOA;
-		/* Use VBT information for CRT DDC if available */
-		if (dev_priv->crt_ddc_bus != 0)
-			i2c_reg = dev_priv->crt_ddc_bus;
-	}
-	intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
-	if (!intel_output->ddc_bus) {
-		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
-			   "failed.\n");
-		return;
-	}
+	intel_connector_attach_encoder(intel_connector, &crt->base);
 
-	intel_output->type = INTEL_OUTPUT_ANALOG;
-	intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-				   (1 << INTEL_ANALOG_CLONE_BIT) |
-				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
-	intel_output->crtc_mask = (1 << 0) | (1 << 1);
-	connector->interlace_allowed = 0;
+	crt->base.type = INTEL_OUTPUT_ANALOG;
+	crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
+	if (IS_I830(dev))
+		crt->base.crtc_mask = (1 << 0);
+	else
+		crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+
+	if (IS_GEN2(dev))
+		connector->interlace_allowed = 0;
+	else
+		connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
-	drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+	if (HAS_PCH_SPLIT(dev))
+		crt->adpa_reg = PCH_ADPA;
+	else if (IS_VALLEYVIEW(dev))
+		crt->adpa_reg = VLV_ADPA;
+	else
+		crt->adpa_reg = ADPA;
+
+	crt->base.compute_config = intel_crt_compute_config;
+	crt->base.disable = intel_disable_crt;
+	crt->base.enable = intel_enable_crt;
+	if (I915_HAS_HOTPLUG(dev))
+		crt->base.hpd_pin = HPD_CRT;
+	if (HAS_DDI(dev)) {
+		crt->base.get_config = hsw_crt_get_config;
+		crt->base.get_hw_state = intel_ddi_get_hw_state;
+	} else {
+		crt->base.get_config = intel_crt_get_config;
+		crt->base.get_hw_state = intel_crt_get_hw_state;
+	}
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+	intel_connector->unregister = intel_connector_unregister;
+
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);
 
-	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
+	if (!I915_HAS_HOTPLUG(dev))
+		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	/*
+	 * Configure the automatic hotplug detection stuff
+	 */
+	crt->force_hotplug_required = 0;
+
+	/*
+	 * TODO: find a proper way to discover whether we need to set the the
+	 * polarity and link reversal bits or not, instead of relying on the
+	 * BIOS.
+	 */
+	if (HAS_PCH_LPT(dev)) {
+		u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
+				 FDI_RX_LINK_REVERSAL_OVERRIDE;
+
+		dev_priv->fdi_rx_config = I915_READ(_FDI_RXA_CTL) & fdi_config;
+	}
+
+	intel_crt_reset(connector);
 }