1 files changed, 0 insertions, 390 deletions
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
deleted file mode 100644
index f7868243af8..00000000000
--- a/drivers/gpio/max732x.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- *  max732x.c - I2C Port Expander with 8/16 I/O
- *
- *  Copyright (C) 2007 Marvell International Ltd.
- *  Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
- *  Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
- *
- *  Derived from drivers/gpio/pca953x.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/max732x.h>
-
-
-/*
- * Each port of MAX732x (including MAX7319) falls into one of the
- * following three types:
- *
- *   - Push Pull Output
- *   - Input
- *   - Open Drain I/O
- *
- * designated by 'O', 'I' and 'P' individually according to MAXIM's
- * datasheets.
- *
- * There are two groups of I/O ports, each group usually includes
- * up to 8 I/O ports, and is accessed by a specific I2C address:
- *
- *   - Group A : by I2C address 0b'110xxxx
- *   - Group B : by I2C address 0b'101xxxx
- *
- * where 'xxxx' is decided by the connections of pin AD2/AD0.  The
- * address used also affects the initial state of output signals.
- *
- * Within each group of ports, there are five known combinations of
- * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
- * the detailed organization of these ports.
- *
- * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
- * and GPIOs from GROUP_A are numbered before those from GROUP_B
- * (if there are two groups).
- *
- * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
- * they are not supported by this driver.
- */
-
-#define PORT_NONE	0x0	/* '/' No Port */
-#define PORT_OUTPUT	0x1	/* 'O' Push-Pull, Output Only */
-#define PORT_INPUT	0x2	/* 'I' Input Only */
-#define PORT_OPENDRAIN	0x3	/* 'P' Open-Drain, I/O */
-
-#define IO_4I4O		0x5AA5	/* O7 O6 I5 I4 I3 I2 O1 O0 */
-#define IO_4P4O		0x5FF5	/* O7 O6 P5 P4 P3 P2 O1 O0 */
-#define IO_8I		0xAAAA	/* I7 I6 I5 I4 I3 I2 I1 I0 */
-#define IO_8P		0xFFFF	/* P7 P6 P5 P4 P3 P2 P1 P0 */
-#define IO_8O		0x5555	/* O7 O6 O5 O4 O3 O2 O1 O0 */
-
-#define GROUP_A(x)	((x) & 0xffff)	/* I2C Addr: 0b'110xxxx */
-#define GROUP_B(x)	((x) << 16)	/* I2C Addr: 0b'101xxxx */
-
-static const struct i2c_device_id max732x_id[] = {
-	{ "max7319", GROUP_A(IO_8I) },
-	{ "max7320", GROUP_B(IO_8O) },
-	{ "max7321", GROUP_A(IO_8P) },
-	{ "max7322", GROUP_A(IO_4I4O) },
-	{ "max7323", GROUP_A(IO_4P4O) },
-	{ "max7324", GROUP_A(IO_8I) | GROUP_B(IO_8O) },
-	{ "max7325", GROUP_A(IO_8P) | GROUP_B(IO_8O) },
-	{ "max7326", GROUP_A(IO_4I4O) | GROUP_B(IO_8O) },
-	{ "max7327", GROUP_A(IO_4P4O) | GROUP_B(IO_8O) },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, max732x_id);
-
-struct max732x_chip {
-	struct gpio_chip gpio_chip;
-
-	struct i2c_client *client;	/* "main" client */
-	struct i2c_client *client_dummy;
-	struct i2c_client *client_group_a;
-	struct i2c_client *client_group_b;
-
-	unsigned int	mask_group_a;
-	unsigned int	dir_input;
-	unsigned int	dir_output;
-
-	struct mutex	lock;
-	uint8_t		reg_out[2];
-};
-
-static int max732x_write(struct max732x_chip *chip, int group_a, uint8_t val)
-{
-	struct i2c_client *client;
-	int ret;
-
-	client = group_a ? chip->client_group_a : chip->client_group_b;
-	ret = i2c_smbus_write_byte(client, val);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed writing\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-static int max732x_read(struct max732x_chip *chip, int group_a, uint8_t *val)
-{
-	struct i2c_client *client;
-	int ret;
-
-	client = group_a ? chip->client_group_a : chip->client_group_b;
-	ret = i2c_smbus_read_byte(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed reading\n");
-		return ret;
-	}
-
-	*val = (uint8_t)ret;
-	return 0;
-}
-
-static inline int is_group_a(struct max732x_chip *chip, unsigned off)
-{
-	return (1u << off) & chip->mask_group_a;
-}
-
-static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
-{
-	struct max732x_chip *chip;
-	uint8_t reg_val;
-	int ret;
-
-	chip = container_of(gc, struct max732x_chip, gpio_chip);
-
-	ret = max732x_read(chip, is_group_a(chip, off), &reg_val);
-	if (ret < 0)
-		return 0;
-
-	return reg_val & (1u << (off & 0x7));
-}
-
-static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
-{
-	struct max732x_chip *chip;
-	uint8_t reg_out, mask = 1u << (off & 0x7);
-	int ret;
-
-	chip = container_of(gc, struct max732x_chip, gpio_chip);
-
-	mutex_lock(&chip->lock);
-
-	reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
-	reg_out = (val) ? reg_out | mask : reg_out & ~mask;
-
-	ret = max732x_write(chip, is_group_a(chip, off), reg_out);
-	if (ret < 0)
-		goto out;
-
-	/* update the shadow register then */
-	if (off > 7)
-		chip->reg_out[1] = reg_out;
-	else
-		chip->reg_out[0] = reg_out;
-out:
-	mutex_unlock(&chip->lock);
-}
-
-static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
-{
-	struct max732x_chip *chip;
-	unsigned int mask = 1u << off;
-
-	chip = container_of(gc, struct max732x_chip, gpio_chip);
-
-	if ((mask & chip->dir_input) == 0) {
-		dev_dbg(&chip->client->dev, "%s port %d is output only\n",
-			chip->client->name, off);
-		return -EACCES;
-	}
-
-	return 0;
-}
-
-static int max732x_gpio_direction_output(struct gpio_chip *gc,
-		unsigned off, int val)
-{
-	struct max732x_chip *chip;
-	unsigned int mask = 1u << off;
-
-	chip = container_of(gc, struct max732x_chip, gpio_chip);
-
-	if ((mask & chip->dir_output) == 0) {
-		dev_dbg(&chip->client->dev, "%s port %d is input only\n",
-			chip->client->name, off);
-		return -EACCES;
-	}
-
-	max732x_gpio_set_value(gc, off, val);
-	return 0;
-}
-
-static int __devinit max732x_setup_gpio(struct max732x_chip *chip,
-					const struct i2c_device_id *id,
-					unsigned gpio_start)
-{
-	struct gpio_chip *gc = &chip->gpio_chip;
-	uint32_t id_data = id->driver_data;
-	int i, port = 0;
-
-	for (i = 0; i < 16; i++, id_data >>= 2) {
-		unsigned int mask = 1 << port;
-
-		switch (id_data & 0x3) {
-		case PORT_OUTPUT:
-			chip->dir_output |= mask;
-			break;
-		case PORT_INPUT:
-			chip->dir_input |= mask;
-			break;
-		case PORT_OPENDRAIN:
-			chip->dir_output |= mask;
-			chip->dir_input |= mask;
-			break;
-		default:
-			continue;
-		}
-
-		if (i < 8)
-			chip->mask_group_a |= mask;
-		port++;
-	}
-
-	if (chip->dir_input)
-		gc->direction_input = max732x_gpio_direction_input;
-	if (chip->dir_output) {
-		gc->direction_output = max732x_gpio_direction_output;
-		gc->set = max732x_gpio_set_value;
-	}
-	gc->get = max732x_gpio_get_value;
-	gc->can_sleep = 1;
-
-	gc->base = gpio_start;
-	gc->ngpio = port;
-	gc->label = chip->client->name;
-	gc->owner = THIS_MODULE;
-
-	return port;
-}
-
-static int __devinit max732x_probe(struct i2c_client *client,
-				   const struct i2c_device_id *id)
-{
-	struct max732x_platform_data *pdata;
-	struct max732x_chip *chip;
-	struct i2c_client *c;
-	uint16_t addr_a, addr_b;
-	int ret, nr_port;
-
-	pdata = client->dev.platform_data;
-	if (pdata == NULL) {
-		dev_dbg(&client->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
-	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
-	chip->client = client;
-
-	nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
-
-	addr_a = (client->addr & 0x0f) | 0x60;
-	addr_b = (client->addr & 0x0f) | 0x50;
-
-	switch (client->addr & 0x70) {
-	case 0x60:
-		chip->client_group_a = client;
-		if (nr_port > 7) {
-			c = i2c_new_dummy(client->adapter, addr_b);
-			chip->client_group_b = chip->client_dummy = c;
-		}
-		break;
-	case 0x50:
-		chip->client_group_b = client;
-		if (nr_port > 7) {
-			c = i2c_new_dummy(client->adapter, addr_a);
-			chip->client_group_a = chip->client_dummy = c;
-		}
-		break;
-	default:
-		dev_err(&client->dev, "invalid I2C address specified %02x\n",
-				client->addr);
-		ret = -EINVAL;
-		goto out_failed;
-	}
-
-	mutex_init(&chip->lock);
-
-	max732x_read(chip, is_group_a(chip, 0), &chip->reg_out[0]);
-	if (nr_port > 7)
-		max732x_read(chip, is_group_a(chip, 8), &chip->reg_out[1]);
-
-	ret = gpiochip_add(&chip->gpio_chip);
-	if (ret)
-		goto out_failed;
-
-	if (pdata->setup) {
-		ret = pdata->setup(client, chip->gpio_chip.base,
-				chip->gpio_chip.ngpio, pdata->context);
-		if (ret < 0)
-			dev_warn(&client->dev, "setup failed, %d\n", ret);
-	}
-
-	i2c_set_clientdata(client, chip);
-	return 0;
-
-out_failed:
-	kfree(chip);
-	return ret;
-}
-
-static int __devexit max732x_remove(struct i2c_client *client)
-{
-	struct max732x_platform_data *pdata = client->dev.platform_data;
-	struct max732x_chip *chip = i2c_get_clientdata(client);
-	int ret;
-
-	if (pdata->teardown) {
-		ret = pdata->teardown(client, chip->gpio_chip.base,
-				chip->gpio_chip.ngpio, pdata->context);
-		if (ret < 0) {
-			dev_err(&client->dev, "%s failed, %d\n",
-					"teardown", ret);
-			return ret;
-		}
-	}
-
-	ret = gpiochip_remove(&chip->gpio_chip);
-	if (ret) {
-		dev_err(&client->dev, "%s failed, %d\n",
-				"gpiochip_remove()", ret);
-		return ret;
-	}
-
-	/* unregister any dummy i2c_client */
-	if (chip->client_dummy)
-		i2c_unregister_device(chip->client_dummy);
-
-	kfree(chip);
-	return 0;
-}
-
-static struct i2c_driver max732x_driver = {
-	.driver = {
-		.name	= "max732x",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= max732x_probe,
-	.remove		= __devexit_p(max732x_remove),
-	.id_table	= max732x_id,
-};
-
-static int __init max732x_init(void)
-{
-	return i2c_add_driver(&max732x_driver);
-}
-/* register after i2c postcore initcall and before
- * subsys initcalls that may rely on these GPIOs
- */
-subsys_initcall(max732x_init);
-
-static void __exit max732x_exit(void)
-{
-	i2c_del_driver(&max732x_driver);
-}
-module_exit(max732x_exit);
-
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
-MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
-MODULE_LICENSE("GPL");