diff options
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 115 |
1 files changed, 100 insertions, 15 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0f0444475bf..4a1b5113e52 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -55,6 +55,10 @@ config GPIO_ACPI def_bool y depends on ACPI +config GPIOLIB_IRQCHIP + select IRQ_DOMAIN + bool + config DEBUG_GPIO bool "Debug GPIO calls" depends on DEBUG_KERNEL @@ -110,17 +114,33 @@ comment "Memory mapped GPIO drivers:" config GPIO_CLPS711X tristate "CLPS711X GPIO support" - depends on ARCH_CLPS711X + depends on ARCH_CLPS711X || COMPILE_TEST select GPIO_GENERIC help Say yes here to support GPIO on CLPS711X SoCs. +config GPIO_DAVINCI + bool "TI Davinci/Keystone GPIO support" + default y if ARCH_DAVINCI + depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) + help + Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. + config GPIO_GENERIC_PLATFORM tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" select GPIO_GENERIC help Say yes here to support basic platform_device memory-mapped GPIO controllers. +config GPIO_DWAPB + tristate "Synopsys DesignWare APB GPIO driver" + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + depends on OF_GPIO + help + Say Y or M here to build support for the Synopsys DesignWare APB + GPIO block. + config GPIO_IT8761E tristate "IT8761E GPIO support" depends on X86 # unconditional access to IO space. @@ -138,6 +158,12 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC +config GPIO_ZEVIO + bool "LSI ZEVIO SoC memory mapped GPIOs" + depends on ARM && OF_GPIO + help + Say yes here to support the GPIO controller in LSI ZEVIO SoCs. + config GPIO_MM_LANTIQ bool "Lantiq Memory mapped GPIOs" depends on LANTIQ && SOC_XWAY @@ -156,6 +182,13 @@ config GPIO_F7188X To compile this driver as a module, choose M here: the module will be called f7188x-gpio. +config GPIO_MOXART + bool "MOXART GPIO support" + depends on ARCH_MOXART + help + Select this option to enable GPIO driver for + MOXA ART SoC devices. + config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -178,7 +211,7 @@ config GPIO_MSM_V1 config GPIO_MSM_V2 tristate "Qualcomm MSM GPIO v2" - depends on GPIOLIB && OF && ARCH_MSM + depends on GPIOLIB && OF && ARCH_QCOM help Say yes here to support the GPIO interface on ARM v7 based Qualcomm MSM chips. Most of the pins on the MSM can be @@ -211,10 +244,20 @@ config GPIO_OCTEON Say yes here to support the on-chip GPIO lines on the OCTEON family of SOCs. +config GPIO_OMAP + bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS + default y if ARCH_OMAP + depends on ARM + select GENERIC_IRQ_CHIP + select GPIOLIB_IRQCHIP + help + Say yes here to enable GPIO support for TI OMAP SoCs. + config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA - select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select GPIOLIB_IRQCHIP help Say yes here to support the PrimeCell PL061 GPIO device @@ -226,7 +269,7 @@ config GPIO_PXA config GPIO_RCAR tristate "Renesas R-Car GPIO" - depends on ARM + depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST) help Say yes here to support GPIO on Renesas R-Car SoCs. @@ -237,6 +280,15 @@ config GPIO_SAMSUNG Legacy GPIO support. Use only for platforms without support for pinctrl. +config GPIO_SCH311X + tristate "SMSC SCH311x SuperI/O GPIO" + help + Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and + SCH3116 "Super I/O" chipsets. + + To compile this driver as a module, choose M here: the module will + be called gpio-sch311x. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR @@ -252,8 +304,15 @@ config GPIO_STA2X11 Say yes here to support the STA2x11/ConneXt GPIO device. The GPIO module has 128 GPIO pins with alternate functions. +config GPIO_SYSCON + tristate "GPIO based on SYSCON" + depends on MFD_SYSCON && OF + help + Say yes here to support GPIO functionality though SYSCON driver. + config GPIO_TS5500 tristate "TS-5500 DIO blocks and compatibles" + depends on TS5500 || COMPILE_TEST help This driver supports Digital I/O exposed by pin blocks found on some Technologic Systems platforms. It includes, but is not limited to, 3 @@ -281,6 +340,15 @@ config GPIO_XILINX help Say yes here to support the Xilinx FPGA GPIO device +config GPIO_XTENSA + bool "Xtensa GPIO32 support" + depends on XTENSA + depends on HAVE_XTENSA_GPIO32 + depends on !SMP + help + Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) + and EXPSTATE (output) ports + config GPIO_VR41XX tristate "NEC VR4100 series General-purpose I/O Uint support" depends on CPU_VR41XX @@ -353,7 +421,7 @@ config GPIO_GE_FPGA board computers. config GPIO_LYNXPOINT - bool "Intel Lynxpoint GPIO support" + tristate "Intel Lynxpoint GPIO support" depends on ACPI && X86 select IRQ_DOMAIN help @@ -371,6 +439,7 @@ config GPIO_GRGPIO config GPIO_TB10X bool + select GENERIC_IRQ_CHIP select OF_GPIO comment "I2C GPIO expanders:" @@ -381,6 +450,14 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. +config GPIO_LP3943 + tristate "TI/National Semiconductor LP3943 GPIO expander" + depends on MFD_LP3943 + help + GPIO driver for LP3943 MFD. + LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. + Open drain outputs are required for this usage. + config GPIO_MAX7300 tristate "Maxim MAX7300 GPIO expander" depends on I2C @@ -421,7 +498,7 @@ config GPIO_MC9S08DZ60 Select this to enable the MC9S08DZ60 GPIO driver config GPIO_PCA953X - tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports" + tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" depends on I2C help Say yes here to provide access to several register-oriented @@ -431,14 +508,19 @@ config GPIO_PCA953X 4 bits: pca9536, pca9537 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, - pca9556, pca9557, pca9574, tca6408 + pca9556, pca9557, pca9574, tca6408, xra1202 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, tca6416 + 24 bits: tca6424 + + 40 bits: pca9505, pca9698 + config GPIO_PCA953X_IRQ bool "Interrupt controller support for PCA953x" depends on GPIO_PCA953X=y + select GPIOLIB_IRQCHIP help Say yes here to enable the pca953x to be used as an interrupt controller. It requires the driver to be built in the kernel. @@ -508,6 +590,7 @@ config GPIO_STP_XWAY config GPIO_TC3589X bool "TC3589X GPIOs" depends on MFD_TC3589X + select GPIOLIB_IRQCHIP help This enables support for the GPIOs found on the TC3589X I/O Expander. @@ -589,7 +672,7 @@ comment "PCI GPIO expanders:" config GPIO_CS5535 tristate "AMD CS5535/CS5536 GPIO support" - depends on PCI && X86 && MFD_CS5535 + depends on MFD_CS5535 help The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that can be used for quite a number of things. The CS5535/6 is found on @@ -601,7 +684,7 @@ config GPIO_BT8XX tristate "BT8XX GPIO abuser" depends on PCI && VIDEO_BT848=n help - The BT8xx frame grabber chip has 24 GPIO pins than can be abused + The BT8xx frame grabber chip has 24 GPIO pins that can be abused as a cheap PCI GPIO card. This chip can be found on Miro, Hauppauge and STB TV-cards. @@ -628,13 +711,13 @@ config GPIO_AMD8111 config GPIO_INTEL_MID bool "Intel Mid GPIO support" depends on PCI && X86 - select IRQ_DOMAIN + select GPIOLIB_IRQCHIP help Say Y here to support Intel Mid GPIO. config GPIO_PCH tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" - depends on PCI && X86 + depends on PCI && (X86_32 || COMPILE_TEST) select GENERIC_IRQ_CHIP help This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff @@ -668,7 +751,7 @@ config GPIO_SODAVILLE config GPIO_TIMBERDALE bool "Support for timberdale GPIO IP" - depends on MFD_TIMBERDALE && HAS_IOMEM + depends on MFD_TIMBERDALE ---help--- Add support for the GPIO IP in the timberdale FPGA. @@ -692,11 +775,13 @@ config GPIO_MAX7301 config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" + depends on OF_GPIO depends on (SPI_MASTER && !I2C) || I2C help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 I/O expanders. This provides a GPIO interface supporting inputs and outputs. + The I2C versions of the chips can be used as interrupt-controller. config GPIO_MC33880 tristate "Freescale MC33880 high-side/low-side switch" @@ -707,10 +792,10 @@ config GPIO_MC33880 config GPIO_74X164 tristate "74x164 serial-in/parallel-out 8-bits shift register" - depends on SPI_MASTER + depends on SPI_MASTER && OF help - Platform driver for 74x164 compatible serial-in/parallel-out - 8-outputs shift registers. This driver can be used to provide access + Driver for 74x164 compatible serial-in/parallel-out 8-outputs + shift registers. This driver can be used to provide access to more gpio outputs. comment "AC97 GPIO expanders:" |