diff options
Diffstat (limited to 'drivers/extcon')
| -rw-r--r-- | drivers/extcon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-adc-jack.c | 73 | ||||
| -rw-r--r-- | drivers/extcon/extcon-arizona.c | 201 | ||||
| -rw-r--r-- | drivers/extcon/extcon-class.c | 308 | ||||
| -rw-r--r-- | drivers/extcon/extcon-gpio.c | 80 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max14577.c | 823 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max77693.c | 157 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max8997.c | 25 | ||||
| -rw-r--r-- | drivers/extcon/extcon-palmas.c | 182 |
10 files changed, 1507 insertions, 353 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 63f454e2057..aebde489c29 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -27,6 +27,16 @@ config EXTCON_ADC_JACK help Say Y here to enable extcon device driver based on ADC values. +config EXTCON_MAX14577 + tristate "MAX14577/77836 EXTCON Support" + depends on MFD_MAX14577 + select IRQ_DOMAIN + select REGMAP_I2C + help + If you say yes here you get support for the MUIC device of + Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory + detector and switch. + config EXTCON_MAX77693 tristate "MAX77693 EXTCON Support" depends on MFD_MAX77693 && INPUT diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 540e2c3a443..bf7861ec090 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_EXTCON) += extcon-class.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o +obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index d0233cd18ff..e18f95be373 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -27,19 +27,19 @@ /** * struct adc_jack_data - internal data for adc_jack device driver - * @edev - extcon device. - * @cable_names - list of supported cables. - * @num_cables - size of cable_names. - * @adc_conditions - list of adc value conditions. - * @num_conditions - size of adc_conditions. - * @irq - irq number of attach/detach event (0 if not exist). - * @handling_delay - interrupt handler will schedule extcon event - * handling at handling_delay jiffies. - * @handler - extcon event handler called by interrupt handler. - * @chan - iio channel being queried. + * @edev: extcon device. + * @cable_names: list of supported cables. + * @num_cables: size of cable_names. + * @adc_conditions: list of adc value conditions. + * @num_conditions: size of adc_conditions. + * @irq: irq number of attach/detach event (0 if not exist). + * @handling_delay: interrupt handler will schedule extcon event + * handling at handling_delay jiffies. + * @handler: extcon event handler called by interrupt handler. + * @chan: iio channel being queried. */ struct adc_jack_data { - struct extcon_dev edev; + struct extcon_dev *edev; const char **cable_names; int num_cables; @@ -64,7 +64,7 @@ static void adc_jack_handler(struct work_struct *work) ret = iio_read_channel_raw(data->chan, &adc_val); if (ret < 0) { - dev_err(data->edev.dev, "read channel() error: %d\n", ret); + dev_err(&data->edev->dev, "read channel() error: %d\n", ret); return; } @@ -80,53 +80,55 @@ static void adc_jack_handler(struct work_struct *work) } /* if no def has met, it means state = 0 (no cables attached) */ - extcon_set_state(&data->edev, state); + extcon_set_state(data->edev, state); } static irqreturn_t adc_jack_irq_thread(int irq, void *_data) { struct adc_jack_data *data = _data; - schedule_delayed_work(&data->handler, data->handling_delay); + queue_delayed_work(system_power_efficient_wq, + &data->handler, data->handling_delay); return IRQ_HANDLED; } static int adc_jack_probe(struct platform_device *pdev) { struct adc_jack_data *data; - struct adc_jack_pdata *pdata = pdev->dev.platform_data; + struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev); int i, err = 0; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - data->edev.name = pdata->name; - if (!pdata->cable_names) { - err = -EINVAL; dev_err(&pdev->dev, "error: cable_names not defined.\n"); - goto out; + return -EINVAL; } - data->edev.supported_cable = pdata->cable_names; + data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names); + if (IS_ERR(data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + data->edev->dev.parent = &pdev->dev; + data->edev->name = pdata->name; /* Check the length of array and set num_cables */ - for (i = 0; data->edev.supported_cable[i]; i++) + for (i = 0; data->edev->supported_cable[i]; i++) ; if (i == 0 || i > SUPPORTED_CABLE_MAX) { - err = -EINVAL; dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n", i - 1); - goto out; + return -EINVAL; } data->num_cables = i; if (!pdata->adc_conditions || !pdata->adc_conditions[0].state) { - err = -EINVAL; dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); - goto out; + return -EINVAL; } data->adc_conditions = pdata->adc_conditions; @@ -136,10 +138,8 @@ static int adc_jack_probe(struct platform_device *pdev) data->num_conditions = i; data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel); - if (IS_ERR(data->chan)) { - err = PTR_ERR(data->chan); - goto out; - } + if (IS_ERR(data->chan)) + return PTR_ERR(data->chan); data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); @@ -147,15 +147,14 @@ static int adc_jack_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - err = extcon_dev_register(&data->edev, &pdev->dev); + err = devm_extcon_dev_register(&pdev->dev, data->edev); if (err) - goto out; + return err; data->irq = platform_get_irq(pdev, 0); if (!data->irq) { dev_err(&pdev->dev, "platform_get_irq failed\n"); - err = -ENODEV; - goto err_irq; + return -ENODEV; } err = request_any_context_irq(data->irq, adc_jack_irq_thread, @@ -163,15 +162,10 @@ static int adc_jack_probe(struct platform_device *pdev) if (err < 0) { dev_err(&pdev->dev, "error: irq %d\n", data->irq); - goto err_irq; + return err; } return 0; - -err_irq: - extcon_dev_unregister(&data->edev); -out: - return err; } static int adc_jack_remove(struct platform_device *pdev) @@ -180,7 +174,6 @@ static int adc_jack_remove(struct platform_device *pdev) free_irq(data->irq, data); cancel_work_sync(&data->handler.work); - extcon_dev_unregister(&data->edev); return 0; } diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 7a1b4a7791b..6c84e3d1204 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -44,6 +44,15 @@ #define HPDET_DEBOUNCE 500 #define DEFAULT_MICD_TIMEOUT 2000 +#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ + ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ + ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ + ARIZONA_MICD_LVL_7) + +#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7) + +#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8) + struct arizona_extcon_info { struct device *dev; struct arizona *arizona; @@ -82,12 +91,12 @@ struct arizona_extcon_info { int hpdet_ip; - struct extcon_dev edev; + struct extcon_dev *edev; }; static const struct arizona_micd_config micd_default_modes[] = { - { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, - { 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, + { ARIZONA_ACCDET_SRC, 1, 0 }, + { 0, 2, 1 }, }; static const struct arizona_micd_range micd_default_ranges[] = { @@ -182,7 +191,8 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) info->micd_modes[mode].gpio); regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_BIAS_SRC_MASK, - info->micd_modes[mode].bias); + info->micd_modes[mode].bias << + ARIZONA_MICD_BIAS_SRC_SHIFT); regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); @@ -193,7 +203,7 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) { - switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) { + switch (info->micd_modes[0].bias) { case 1: return "MICBIAS1"; case 2: @@ -212,27 +222,19 @@ static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) struct snd_soc_dapm_context *dapm = arizona->dapm; int ret; - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_force_enable_pin(dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to enable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); if (!arizona->pdata.micd_force_micbias) { - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to disable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); } } @@ -294,16 +296,12 @@ static void arizona_stop_mic(struct arizona_extcon_info *info) ARIZONA_MICD_ENA, 0, &change); - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_disable_pin(dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to disable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); if (info->micd_reva) { @@ -388,7 +386,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && - (val < 100 || val > 0x3fb)) { + (val < 100 || val >= 0x3fb)) { range++; dev_dbg(arizona->dev, "Moving to HPDET range %d\n", range); @@ -401,7 +399,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) } /* If we go out of range report top of range */ - if (val < 100 || val > 0x3fb) { + if (val < 100 || val >= 0x3fb) { dev_dbg(arizona->dev, "Measurement out of range\n"); return ARIZONA_HPDET_MAX; } @@ -425,26 +423,15 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) } val &= ARIZONA_HP_LVL_B_MASK; + /* Convert to ohms, the value is in 0.5 ohm increments */ + val /= 2; regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, &range); range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; - /* Skip up or down a range? */ - if (range && (val < arizona_hpdet_c_ranges[range].min)) { - range--; - dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", - arizona_hpdet_c_ranges[range].min, - arizona_hpdet_c_ranges[range].max); - regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_IMPEDANCE_RANGE_MASK, - range << - ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); - return -EAGAIN; - } - + /* Skip up a range, or report? */ if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && (val >= arizona_hpdet_c_ranges[range].max)) { range++; @@ -458,6 +445,12 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); return -EAGAIN; } + + if (range && (val < arizona_hpdet_c_ranges[range].min)) { + dev_dbg(arizona->dev, "Reporting range boundary %d\n", + arizona_hpdet_c_ranges[range].min); + val = arizona_hpdet_c_ranges[range].min; + } } dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); @@ -514,7 +507,7 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading, } /* - * If we measure the mic as + * If we measure the mic as high impedance */ if (!id_gpio || info->hpdet_res[1] > 50) { dev_dbg(arizona->dev, "Detected mic\n"); @@ -553,7 +546,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -564,11 +557,10 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } ret = arizona_hpdet_read(info); - if (ret == -EAGAIN) { + if (ret == -EAGAIN) goto out; - } else if (ret < 0) { + else if (ret < 0) goto done; - } reading = ret; /* Reset back to starting range */ @@ -578,11 +570,10 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) 0); ret = arizona_hpdet_do_id(info, &reading, &mic); - if (ret == -EAGAIN) { + if (ret == -EAGAIN) goto out; - } else if (ret < 0) { + else if (ret < 0) goto done; - } /* Report high impedence cables as line outputs */ if (reading >= 5000) @@ -590,14 +581,20 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) else report = ARIZONA_CABLE_HEADPHONE; - ret = extcon_set_cable_state_(&info->edev, report, true); + ret = extcon_set_cable_state_(info->edev, report, true); if (ret != 0) dev_err(arizona->dev, "Failed to report HP/line: %d\n", ret); +done: + /* Reset back to starting range */ + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, + 0); + arizona_extcon_do_magic(info, 0); -done: if (id_gpio) gpio_set_value_cansleep(id_gpio, 0); @@ -667,7 +664,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_HEADPHONE, 1 << ARIZONA_CABLE_HEADPHONE); if (ret != 0) @@ -726,7 +723,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_HEADPHONE, 1 << ARIZONA_CABLE_HEADPHONE); if (ret != 0) @@ -738,8 +735,8 @@ err: static void arizona_micd_timeout_work(struct work_struct *work) { struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - micd_timeout_work.work); + struct arizona_extcon_info, + micd_timeout_work.work); mutex_lock(&info->lock); @@ -756,8 +753,8 @@ static void arizona_micd_timeout_work(struct work_struct *work) static void arizona_micd_detect(struct work_struct *work) { struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - micd_detect_work.work); + struct arizona_extcon_info, + micd_detect_work.work); struct arizona *arizona = info->arizona; unsigned int val = 0, lvl; int ret, i, key; @@ -766,10 +763,24 @@ static void arizona_micd_detect(struct work_struct *work) mutex_lock(&info->lock); - for (i = 0; i < 10 && !(val & 0x7fc); i++) { + /* If the cable was removed while measuring ignore the result */ + ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); + if (ret < 0) { + dev_err(arizona->dev, "Failed to check cable state: %d\n", + ret); + mutex_unlock(&info->lock); + return; + } else if (!ret) { + dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n"); + mutex_unlock(&info->lock); + return; + } + + for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) { ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); if (ret != 0) { - dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret); + dev_err(arizona->dev, + "Failed to read MICDET: %d\n", ret); mutex_unlock(&info->lock); return; } @@ -777,13 +788,14 @@ static void arizona_micd_detect(struct work_struct *work) dev_dbg(arizona->dev, "MICDET: %x\n", val); if (!(val & ARIZONA_MICD_VALID)) { - dev_warn(arizona->dev, "Microphone detection state invalid\n"); + dev_warn(arizona->dev, + "Microphone detection state invalid\n"); mutex_unlock(&info->lock); return; } } - if (i == 10 && !(val & 0x7fc)) { + if (i == 10 && !(val & MICD_LVL_0_TO_8)) { dev_err(arizona->dev, "Failed to get valid MICDET value\n"); mutex_unlock(&info->lock); return; @@ -797,10 +809,10 @@ static void arizona_micd_detect(struct work_struct *work) } /* If we got a high impedence we should have a headset, report it. */ - if (info->detecting && (val & 0x400)) { + if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { arizona_identify_headphone(info); - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_MICROPHONE, 1 << ARIZONA_CABLE_MICROPHONE); @@ -826,7 +838,7 @@ static void arizona_micd_detect(struct work_struct *work) * plain headphones. If both polarities report a low * impedence then give up and report headphones. */ - if (info->detecting && (val & 0x3f8)) { + if (info->detecting && (val & MICD_LVL_1_TO_7)) { if (info->jack_flips >= info->micd_num_modes * 10) { dev_dbg(arizona->dev, "Detected HP/line\n"); arizona_identify_headphone(info); @@ -850,7 +862,7 @@ static void arizona_micd_detect(struct work_struct *work) * If we're still detecting and we detect a short then we've * got a headphone. Otherwise it's a button press. */ - if (val & 0x3fc) { + if (val & MICD_LVL_0_TO_7) { if (info->mic) { dev_dbg(arizona->dev, "Mic button detected\n"); @@ -890,8 +902,9 @@ static void arizona_micd_detect(struct work_struct *work) handled: if (info->detecting) - schedule_delayed_work(&info->micd_timeout_work, - msecs_to_jiffies(info->micd_timeout)); + queue_delayed_work(system_power_efficient_wq, + &info->micd_timeout_work, + msecs_to_jiffies(info->micd_timeout)); pm_runtime_mark_last_busy(info->dev); mutex_unlock(&info->lock); @@ -912,8 +925,9 @@ static irqreturn_t arizona_micdet(int irq, void *data) mutex_unlock(&info->lock); if (debounce) - schedule_delayed_work(&info->micd_detect_work, - msecs_to_jiffies(debounce)); + queue_delayed_work(system_power_efficient_wq, + &info->micd_detect_work, + msecs_to_jiffies(debounce)); else arizona_micd_detect(&info->micd_detect_work.work); @@ -923,8 +937,8 @@ static irqreturn_t arizona_micdet(int irq, void *data) static void arizona_hpdet_work(struct work_struct *work) { struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - hpdet_work.work); + struct arizona_extcon_info, + hpdet_work.work); mutex_lock(&info->lock); arizona_start_hpdet_acc_id(info); @@ -967,12 +981,17 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (val == info->last_jackdet) { dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n"); if (cancelled_hp) - schedule_delayed_work(&info->hpdet_work, - msecs_to_jiffies(HPDET_DEBOUNCE)); + queue_delayed_work(system_power_efficient_wq, + &info->hpdet_work, + msecs_to_jiffies(HPDET_DEBOUNCE)); - if (cancelled_mic) - schedule_delayed_work(&info->micd_timeout_work, - msecs_to_jiffies(info->micd_timeout)); + if (cancelled_mic) { + int micd_timeout = info->micd_timeout; + + queue_delayed_work(system_power_efficient_wq, + &info->micd_timeout_work, + msecs_to_jiffies(micd_timeout)); + } goto out; } @@ -980,7 +999,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (info->last_jackdet == present) { dev_dbg(arizona->dev, "Detected jack\n"); - ret = extcon_set_cable_state_(&info->edev, + ret = extcon_set_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL, true); if (ret != 0) @@ -994,8 +1013,9 @@ static irqreturn_t arizona_jackdet(int irq, void *data) arizona_start_mic(info); } else { - schedule_delayed_work(&info->hpdet_work, - msecs_to_jiffies(HPDET_DEBOUNCE)); + queue_delayed_work(system_power_efficient_wq, + &info->hpdet_work, + msecs_to_jiffies(HPDET_DEBOUNCE)); } regmap_update_bits(arizona->regmap, @@ -1018,7 +1038,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) info->micd_ranges[i].key, 0); input_sync(info->input); - ret = extcon_update_state(&info->edev, 0xffffffff, 0); + ret = extcon_update_state(info->edev, 0xffffffff, 0); if (ret != 0) dev_err(arizona->dev, "Removal report failed: %d\n", ret); @@ -1034,6 +1054,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) else info->micd_timeout = DEFAULT_MICD_TIMEOUT; +out: /* Clear trig_sts to make sure DCVDD is not forced up */ regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, ARIZONA_MICD_CLAMP_FALL_TRIG_STS | @@ -1041,7 +1062,6 @@ static irqreturn_t arizona_jackdet(int irq, void *data) ARIZONA_JD1_FALL_TRIG_STS | ARIZONA_JD1_RISE_TRIG_STS); -out: mutex_unlock(&info->lock); pm_runtime_mark_last_busy(info->dev); @@ -1073,7 +1093,7 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, static int arizona_extcon_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); - struct arizona_pdata *pdata; + struct arizona_pdata *pdata = &arizona->pdata; struct arizona_extcon_info *info; unsigned int val; int jack_irq_fall, jack_irq_rise; @@ -1082,20 +1102,17 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (!arizona->dapm || !arizona->dapm->card) return -EPROBE_DEFER; - pdata = dev_get_platdata(arizona->dev); - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "Failed to allocate memory\n"); - ret = -ENOMEM; - goto err; + return -ENOMEM; } info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); if (IS_ERR(info->micvdd)) { ret = PTR_ERR(info->micvdd); dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); - goto err; + return ret; } mutex_init(&info->lock); @@ -1119,18 +1136,33 @@ static int arizona_extcon_probe(struct platform_device *pdev) break; } break; + case WM5110: + switch (arizona->rev) { + case 0 ... 2: + break; + default: + info->micd_clamp = true; + info->hpdet_ip = 2; + break; + } + break; default: break; } - info->edev.name = "Headset Jack"; - info->edev.supported_cable = arizona_cable; + info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + info->edev->name = "Headset Jack"; + info->edev->dev.parent = arizona->dev; - ret = extcon_dev_register(&info->edev, arizona->dev); + ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret < 0) { dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", ret); - goto err; + return ret; } info->input = devm_input_allocate_device(&pdev->dev); @@ -1381,8 +1413,6 @@ err_rise: err_input: err_register: pm_runtime_disable(&pdev->dev); - extcon_dev_unregister(&info->edev); -err: return ret; } @@ -1416,7 +1446,6 @@ static int arizona_extcon_remove(struct platform_device *pdev) regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, 0); arizona_clk32k_disable(arizona); - extcon_dev_unregister(&info->edev); return 0; } diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 18ccadef43f..18d42c0e458 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -31,6 +31,7 @@ #include <linux/extcon.h> #include <linux/slab.h> #include <linux/sysfs.h> +#include <linux/of.h> /* * extcon_cable_name suggests the standard cable names for commonly used @@ -74,7 +75,7 @@ static DEFINE_MUTEX(extcon_dev_list_lock); /** * check_mutually_exclusive - Check if new_state violates mutually_exclusive - * condition. + * condition. * @edev: the extcon device * @new_state: new cable attach status for @edev * @@ -105,7 +106,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf) { int i, count = 0; - struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev); + struct extcon_dev *edev = dev_get_drvdata(dev); if (edev->print_state) { int ret = edev->print_state(edev, buf); @@ -129,13 +130,12 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, return count; } -int extcon_set_state(struct extcon_dev *edev, u32 state); static ssize_t state_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u32 state; ssize_t ret = 0; - struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev); + struct extcon_dev *edev = dev_get_drvdata(dev); ret = sscanf(buf, "0x%x", &state); if (ret == 0) @@ -148,11 +148,12 @@ static ssize_t state_store(struct device *dev, struct device_attribute *attr, return count; } +static DEVICE_ATTR_RW(state); static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev); + struct extcon_dev *edev = dev_get_drvdata(dev); /* Optional callback given by the user */ if (edev->print_name) { @@ -161,8 +162,9 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, return ret; } - return sprintf(buf, "%s\n", dev_name(edev->dev)); + return sprintf(buf, "%s\n", dev_name(&edev->dev)); } +static DEVICE_ATTR_RO(name); static ssize_t cable_name_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -187,7 +189,7 @@ static ssize_t cable_state_show(struct device *dev, /** * extcon_update_state() - Update the cable attach states of the extcon device - * only for the masked bits. + * only for the masked bits. * @edev: the extcon device * @mask: the bit mask to designate updated bits. * @state: new cable attach status for @edev @@ -225,11 +227,10 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) edev->state |= state & mask; raw_notifier_call_chain(&edev->nh, old_state, edev); - /* This could be in interrupt handler */ prop_buf = (char *)get_zeroed_page(GFP_ATOMIC); if (prop_buf) { - length = name_show(edev->dev, NULL, prop_buf); + length = name_show(&edev->dev, NULL, prop_buf); if (length > 0) { if (prop_buf[length - 1] == '\n') prop_buf[length - 1] = 0; @@ -237,7 +238,7 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) "NAME=%s", prop_buf); envp[env_offset++] = name_buf; } - length = state_show(edev->dev, NULL, prop_buf); + length = state_show(&edev->dev, NULL, prop_buf); if (length > 0) { if (prop_buf[length - 1] == '\n') prop_buf[length - 1] = 0; @@ -249,14 +250,14 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) /* Unlock early before uevent */ spin_unlock_irqrestore(&edev->lock, flags); - kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp); + kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp); free_page((unsigned long)prop_buf); } else { /* Unlock early before uevent */ spin_unlock_irqrestore(&edev->lock, flags); - dev_err(edev->dev, "out of memory in extcon_set_state\n"); - kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE); + dev_err(&edev->dev, "out of memory in extcon_set_state\n"); + kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE); } } else { /* No changes */ @@ -337,8 +338,9 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state); /** * extcon_set_cable_state_() - Set the status of a specific cable. - * @edev: the extcon device that has the cable. - * @index: cable index that can be retrieved by extcon_find_cable_index(). + * @edev: the extcon device that has the cable. + * @index: cable index that can be retrieved by + * extcon_find_cable_index(). * @cable_state: the new cable status. The default semantics is * true: attached / false: detached. */ @@ -357,8 +359,8 @@ EXPORT_SYMBOL_GPL(extcon_set_cable_state_); /** * extcon_set_cable_state() - Set the status of a specific cable. - * @edev: the extcon device that has the cable. - * @cable_name: cable name. + * @edev: the extcon device that has the cable. + * @cable_name: cable name. * @cable_state: the new cable status. The default semantics is * true: attached / false: detached. * @@ -417,14 +419,14 @@ static int _call_per_cable(struct notifier_block *nb, unsigned long val, /** * extcon_register_interest() - Register a notifier for a state change of a - * specific cable, not an entier set of cables of a - * extcon device. - * @obj: an empty extcon_specific_cable_nb object to be returned. + * specific cable, not an entier set of cables of a + * extcon device. + * @obj: an empty extcon_specific_cable_nb object to be returned. * @extcon_name: the name of extcon device. * if NULL, extcon_register_interest will register * every cable with the target cable_name given. * @cable_name: the target cable name. - * @nb: the notifier block to get notified. + * @nb: the notifier block to get notified. * * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets * the struct for you. @@ -450,7 +452,8 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj, if (!obj->edev) return -ENODEV; - obj->cable_index = extcon_find_cable_index(obj->edev, cable_name); + obj->cable_index = extcon_find_cable_index(obj->edev, + cable_name); if (obj->cable_index < 0) return obj->cable_index; @@ -458,7 +461,8 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj, obj->internal_nb.notifier_call = _call_per_cable; - return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb); + return raw_notifier_chain_register(&obj->edev->nh, + &obj->internal_nb); } else { struct class_dev_iter iter; struct extcon_dev *extd; @@ -468,7 +472,7 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj, return -ENODEV; class_dev_iter_init(&iter, extcon_class, NULL, NULL); while ((dev = class_dev_iter_next(&iter))) { - extd = (struct extcon_dev *)dev_get_drvdata(dev); + extd = dev_get_drvdata(dev); if (extcon_find_cable_index(extd, cable_name) < 0) continue; @@ -485,7 +489,7 @@ EXPORT_SYMBOL_GPL(extcon_register_interest); /** * extcon_unregister_interest() - Unregister the notifier registered by - * extcon_register_interest(). + * extcon_register_interest(). * @obj: the extcon_specific_cable_nb object returned by * extcon_register_interest(). */ @@ -500,7 +504,7 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest); /** * extcon_register_notifier() - Register a notifiee to get notified by - * any attach status changes from the extcon. + * any attach status changes from the extcon. * @edev: the extcon device. * @nb: a notifier block to be registered. * @@ -527,11 +531,12 @@ int extcon_unregister_notifier(struct extcon_dev *edev, } EXPORT_SYMBOL_GPL(extcon_unregister_notifier); -static struct device_attribute extcon_attrs[] = { - __ATTR(state, S_IRUGO | S_IWUSR, state_show, state_store), - __ATTR_RO(name), - __ATTR_NULL, +static struct attribute *extcon_attrs[] = { + &dev_attr_state.attr, + &dev_attr_name.attr, + NULL, }; +ATTRIBUTE_GROUPS(extcon); static int create_extcon_class(void) { @@ -539,7 +544,7 @@ static int create_extcon_class(void) extcon_class = class_create(THIS_MODULE, "extcon"); if (IS_ERR(extcon_class)) return PTR_ERR(extcon_class); - extcon_class->dev_attrs = extcon_attrs; + extcon_class->dev_groups = extcon_groups; #if defined(CONFIG_ANDROID) switch_class = class_compat_register("switch"); @@ -553,7 +558,6 @@ static int create_extcon_class(void) static void extcon_dev_release(struct device *dev) { - kfree(dev); } static const char *muex_name = "mutually_exclusive"; @@ -561,17 +565,110 @@ static void dummy_sysfs_dev_release(struct device *dev) { } +/* + * extcon_dev_allocate() - Allocate the memory of extcon device. + * @supported_cable: Array of supported cable names ending with NULL. + * If supported_cable is NULL, cable name related APIs + * are disabled. + * + * This function allocates the memory for extcon device without allocating + * memory in each extcon provider driver and initialize default setting for + * extcon device. + * + * Return the pointer of extcon device if success or ERR_PTR(err) if fail + */ +struct extcon_dev *extcon_dev_allocate(const char **supported_cable) +{ + struct extcon_dev *edev; + + edev = kzalloc(sizeof(*edev), GFP_KERNEL); + if (!edev) + return ERR_PTR(-ENOMEM); + + edev->max_supported = 0; + edev->supported_cable = supported_cable; + + return edev; +} + +/* + * extcon_dev_free() - Free the memory of extcon device. + * @edev: the extcon device to free + */ +void extcon_dev_free(struct extcon_dev *edev) +{ + kfree(edev); +} +EXPORT_SYMBOL_GPL(extcon_dev_free); + +static int devm_extcon_dev_match(struct device *dev, void *res, void *data) +{ + struct extcon_dev **r = res; + + if (WARN_ON(!r || !*r)) + return 0; + + return *r == data; +} + +static void devm_extcon_dev_release(struct device *dev, void *res) +{ + extcon_dev_free(*(struct extcon_dev **)res); +} + +/** + * devm_extcon_dev_allocate - Allocate managed extcon device + * @dev: device owning the extcon device being created + * @supported_cable: Array of supported cable names ending with NULL. + * If supported_cable is NULL, cable name related APIs + * are disabled. + * + * This function manages automatically the memory of extcon device using device + * resource management and simplify the control of freeing the memory of extcon + * device. + * + * Returns the pointer memory of allocated extcon_dev if success + * or ERR_PTR(err) if fail + */ +struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, + const char **supported_cable) +{ + struct extcon_dev **ptr, *edev; + + ptr = devres_alloc(devm_extcon_dev_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + edev = extcon_dev_allocate(supported_cable); + if (IS_ERR(edev)) { + devres_free(ptr); + return edev; + } + + *ptr = edev; + devres_add(dev, ptr); + + return edev; +} +EXPORT_SYMBOL_GPL(devm_extcon_dev_allocate); + +void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev) +{ + WARN_ON(devres_release(dev, devm_extcon_dev_release, + devm_extcon_dev_match, edev)); +} +EXPORT_SYMBOL_GPL(devm_extcon_dev_free); + /** * extcon_dev_register() - Register a new extcon device * @edev : the new extcon device (should be allocated before calling) - * @dev : the parent device for this extcon device. * * Among the members of edev struct, please set the "user initializing data" * in any case and set the "optional callbacks" if required. However, please * do not set the values of "internal data", which are initialized by * this function. */ -int extcon_dev_register(struct extcon_dev *edev, struct device *dev) +int extcon_dev_register(struct extcon_dev *edev) { int ret, index = 0; @@ -591,18 +688,20 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) } if (index > SUPPORTED_CABLE_MAX) { - dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n"); + dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n"); return -EINVAL; } - edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL); - if (!edev->dev) - return -ENOMEM; - edev->dev->parent = dev; - edev->dev->class = extcon_class; - edev->dev->release = extcon_dev_release; + edev->dev.class = extcon_class; + edev->dev.release = extcon_dev_release; - dev_set_name(edev->dev, "%s", edev->name ? edev->name : dev_name(dev)); + edev->name = edev->name ? edev->name : dev_name(edev->dev.parent); + if (IS_ERR_OR_NULL(edev->name)) { + dev_err(&edev->dev, + "extcon device name is null\n"); + return -EINVAL; + } + dev_set_name(&edev->dev, "%s", edev->name); if (edev->max_supported) { char buf[10]; @@ -710,7 +809,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) goto err_alloc_groups; } - edev->extcon_dev_type.name = dev_name(edev->dev); + edev->extcon_dev_type.name = dev_name(&edev->dev); edev->extcon_dev_type.release = dummy_sysfs_dev_release; for (index = 0; index < edev->max_supported; index++) @@ -720,25 +819,24 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) edev->extcon_dev_type.groups[index] = &edev->attr_g_muex; - edev->dev->type = &edev->extcon_dev_type; + edev->dev.type = &edev->extcon_dev_type; } - ret = device_register(edev->dev); + ret = device_register(&edev->dev); if (ret) { - put_device(edev->dev); + put_device(&edev->dev); goto err_dev; } #if defined(CONFIG_ANDROID) if (switch_class) - ret = class_compat_create_link(switch_class, edev->dev, - NULL); + ret = class_compat_create_link(switch_class, &edev->dev, NULL); #endif /* CONFIG_ANDROID */ spin_lock_init(&edev->lock); RAW_INIT_NOTIFIER_HEAD(&edev->nh); - dev_set_drvdata(edev->dev, edev); + dev_set_drvdata(&edev->dev, edev); edev->state = 0; mutex_lock(&extcon_dev_list_lock); @@ -764,7 +862,6 @@ err_alloc_cables: if (edev->max_supported) kfree(edev->cables); err_sysfs_alloc: - kfree(edev->dev); return ret; } EXPORT_SYMBOL_GPL(extcon_dev_register); @@ -784,12 +881,14 @@ void extcon_dev_unregister(struct extcon_dev *edev) list_del(&edev->entry); mutex_unlock(&extcon_dev_list_lock); - if (IS_ERR_OR_NULL(get_device(edev->dev))) { - dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n", - dev_name(edev->dev)); + if (IS_ERR_OR_NULL(get_device(&edev->dev))) { + dev_err(&edev->dev, "Failed to unregister extcon_dev (%s)\n", + dev_name(&edev->dev)); return; } + device_unregister(&edev->dev); + if (edev->mutually_exclusive && edev->max_supported) { for (index = 0; edev->mutually_exclusive[index]; index++) @@ -808,13 +907,110 @@ void extcon_dev_unregister(struct extcon_dev *edev) #if defined(CONFIG_ANDROID) if (switch_class) - class_compat_remove_link(switch_class, edev->dev, NULL); + class_compat_remove_link(switch_class, &edev->dev, NULL); #endif - device_unregister(edev->dev); - put_device(edev->dev); + put_device(&edev->dev); } EXPORT_SYMBOL_GPL(extcon_dev_unregister); +static void devm_extcon_dev_unreg(struct device *dev, void *res) +{ + extcon_dev_unregister(*(struct extcon_dev **)res); +} + +/** + * devm_extcon_dev_register() - Resource-managed extcon_dev_register() + * @dev: device to allocate extcon device + * @edev: the new extcon device to register + * + * Managed extcon_dev_register() function. If extcon device is attached with + * this function, that extcon device is automatically unregistered on driver + * detach. Internally this function calls extcon_dev_register() function. + * To get more information, refer that function. + * + * If extcon device is registered with this function and the device needs to be + * unregistered separately, devm_extcon_dev_unregister() should be used. + * + * Returns 0 if success or negaive error number if failure. + */ +int devm_extcon_dev_register(struct device *dev, struct extcon_dev *edev) +{ + struct extcon_dev **ptr; + int ret; + + ptr = devres_alloc(devm_extcon_dev_unreg, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = extcon_dev_register(edev); + if (ret) { + devres_free(ptr); + return ret; + } + + *ptr = edev; + devres_add(dev, ptr); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_extcon_dev_register); + +/** + * devm_extcon_dev_unregister() - Resource-managed extcon_dev_unregister() + * @dev: device the extcon belongs to + * @edev: the extcon device to unregister + * + * Unregister extcon device that is registered with devm_extcon_dev_register() + * function. + */ +void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev) +{ + WARN_ON(devres_release(dev, devm_extcon_dev_unreg, + devm_extcon_dev_match, edev)); +} +EXPORT_SYMBOL_GPL(devm_extcon_dev_unregister); + +#ifdef CONFIG_OF +/* + * extcon_get_edev_by_phandle - Get the extcon device from devicetree + * @dev - instance to the given device + * @index - index into list of extcon_dev + * + * return the instance of extcon device + */ +struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index) +{ + struct device_node *node; + struct extcon_dev *edev; + + if (!dev->of_node) { + dev_err(dev, "device does not have a device node entry\n"); + return ERR_PTR(-EINVAL); + } + + node = of_parse_phandle(dev->of_node, "extcon", index); + if (!node) { + dev_err(dev, "failed to get phandle in %s node\n", + dev->of_node->full_name); + return ERR_PTR(-ENODEV); + } + + edev = extcon_get_extcon_dev(node->name); + if (!edev) { + dev_err(dev, "unable to get extcon device : %s\n", node->name); + return ERR_PTR(-ENODEV); + } + + return edev; +} +#else +struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index) +{ + return ERR_PTR(-ENOSYS); +} +#endif /* CONFIG_OF */ +EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle); + static int __init extcon_class_init(void) { return create_extcon_class(); diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 02bec32adde..645b2835681 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -32,13 +32,15 @@ #include <linux/extcon/extcon-gpio.h> struct gpio_extcon_data { - struct extcon_dev edev; + struct extcon_dev *edev; unsigned gpio; + bool gpio_active_low; const char *state_on; const char *state_off; int irq; struct delayed_work work; unsigned long debounce_jiffies; + bool check_on_resume; }; static void gpio_extcon_work(struct work_struct *work) @@ -49,23 +51,26 @@ static void gpio_extcon_work(struct work_struct *work) work); state = gpio_get_value(data->gpio); - extcon_set_state(&data->edev, state); + if (data->gpio_active_low) + state = !state; + extcon_set_state(data->edev, state); } static irqreturn_t gpio_irq_handler(int irq, void *dev_id) { struct gpio_extcon_data *extcon_data = dev_id; - schedule_delayed_work(&extcon_data->work, + queue_delayed_work(system_power_efficient_wq, &extcon_data->work, extcon_data->debounce_jiffies); return IRQ_HANDLED; } static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf) { - struct gpio_extcon_data *extcon_data = - container_of(edev, struct gpio_extcon_data, edev); + struct device *dev = edev->dev.parent; + struct gpio_extcon_data *extcon_data = dev_get_drvdata(dev); const char *state; + if (extcon_get_state(edev)) state = extcon_data->state_on; else @@ -78,9 +83,9 @@ static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf) static int gpio_extcon_probe(struct platform_device *pdev) { - struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data; + struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev); struct gpio_extcon_data *extcon_data; - int ret = 0; + int ret; if (!pdata) return -EBUSY; @@ -94,47 +99,56 @@ static int gpio_extcon_probe(struct platform_device *pdev) if (!extcon_data) return -ENOMEM; - extcon_data->edev.name = pdata->name; + extcon_data->edev = devm_extcon_dev_allocate(&pdev->dev, NULL); + if (IS_ERR(extcon_data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + extcon_data->edev->name = pdata->name; + extcon_data->edev->dev.parent = &pdev->dev; + extcon_data->gpio = pdata->gpio; + extcon_data->gpio_active_low = pdata->gpio_active_low; extcon_data->state_on = pdata->state_on; extcon_data->state_off = pdata->state_off; + extcon_data->check_on_resume = pdata->check_on_resume; if (pdata->state_on && pdata->state_off) - extcon_data->edev.print_state = extcon_gpio_print_state; - extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce); + extcon_data->edev->print_state = extcon_gpio_print_state; - ret = extcon_dev_register(&extcon_data->edev, &pdev->dev); + ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, + pdev->name); if (ret < 0) return ret; - ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, - pdev->name); + if (pdata->debounce) { + ret = gpio_set_debounce(extcon_data->gpio, + pdata->debounce * 1000); + if (ret < 0) + extcon_data->debounce_jiffies = + msecs_to_jiffies(pdata->debounce); + } + + ret = devm_extcon_dev_register(&pdev->dev, extcon_data->edev); if (ret < 0) - goto err; + return ret; INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work); extcon_data->irq = gpio_to_irq(extcon_data->gpio); - if (extcon_data->irq < 0) { - ret = extcon_data->irq; - goto err; - } + if (extcon_data->irq < 0) + return extcon_data->irq; ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler, pdata->irq_flags, pdev->name, extcon_data); if (ret < 0) - goto err; + return ret; platform_set_drvdata(pdev, extcon_data); /* Perform initial detection */ gpio_extcon_work(&extcon_data->work.work); return 0; - -err: - extcon_dev_unregister(&extcon_data->edev); - - return ret; } static int gpio_extcon_remove(struct platform_device *pdev) @@ -143,17 +157,33 @@ static int gpio_extcon_remove(struct platform_device *pdev) cancel_delayed_work_sync(&extcon_data->work); free_irq(extcon_data->irq, extcon_data); - extcon_dev_unregister(&extcon_data->edev); return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpio_extcon_resume(struct device *dev) +{ + struct gpio_extcon_data *extcon_data; + + extcon_data = dev_get_drvdata(dev); + if (extcon_data->check_on_resume) + queue_delayed_work(system_power_efficient_wq, + &extcon_data->work, extcon_data->debounce_jiffies); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume); + static struct platform_driver gpio_extcon_driver = { .probe = gpio_extcon_probe, .remove = gpio_extcon_remove, .driver = { .name = "extcon-gpio", .owner = THIS_MODULE, + .pm = &gpio_extcon_pm_ops, }, }; diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c new file mode 100644 index 00000000000..d49e891b567 --- /dev/null +++ b/drivers/extcon/extcon-max14577.c @@ -0,0 +1,823 @@ +/* + * extcon-max14577.c - MAX14577/77836 extcon driver to support MUIC + * + * Copyright (C) 2013,2014 Samsung Electrnoics + * Chanwoo Choi <cw00.choi@samsung.com> + * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mfd/max14577.h> +#include <linux/mfd/max14577-private.h> +#include <linux/extcon.h> + +#define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ + +enum max14577_muic_adc_debounce_time { + ADC_DEBOUNCE_TIME_5MS = 0, + ADC_DEBOUNCE_TIME_10MS, + ADC_DEBOUNCE_TIME_25MS, + ADC_DEBOUNCE_TIME_38_62MS, +}; + +enum max14577_muic_status { + MAX14577_MUIC_STATUS1 = 0, + MAX14577_MUIC_STATUS2 = 1, + MAX14577_MUIC_STATUS_END, +}; + +/** + * struct max14577_muic_irq + * @irq: the index of irq list of MUIC device. + * @name: the name of irq. + * @virq: the virtual irq to use irq domain + */ +struct max14577_muic_irq { + unsigned int irq; + const char *name; + unsigned int virq; +}; + +static struct max14577_muic_irq max14577_muic_irqs[] = { + { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, + { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, + { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, + { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, + { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, + { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, + { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, + { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, +}; + +static struct max14577_muic_irq max77836_muic_irqs[] = { + { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, + { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, + { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, + { MAX77836_IRQ_INT1_ADC1K, "muic-ADC1K" }, + { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, + { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, + { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, + { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, + { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, + { MAX77836_IRQ_INT2_VIDRM, "muic-VIDRM" }, +}; + +struct max14577_muic_info { + struct device *dev; + struct max14577 *max14577; + struct extcon_dev *edev; + int prev_cable_type; + int prev_chg_type; + u8 status[MAX14577_MUIC_STATUS_END]; + + struct max14577_muic_irq *muic_irqs; + unsigned int muic_irqs_num; + bool irq_adc; + bool irq_chg; + struct work_struct irq_work; + struct mutex mutex; + + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; + +enum max14577_muic_cable_group { + MAX14577_CABLE_GROUP_ADC = 0, + MAX14577_CABLE_GROUP_CHG, +}; + +/* Define supported accessory type */ +enum max14577_muic_acc_type { + MAX14577_MUIC_ADC_GROUND = 0x0, + MAX14577_MUIC_ADC_SEND_END_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S1_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S2_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S3_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S4_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S5_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S6_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S7_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S8_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S9_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S10_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S11_BUTTON, + MAX14577_MUIC_ADC_REMOTE_S12_BUTTON, + MAX14577_MUIC_ADC_RESERVED_ACC_1, + MAX14577_MUIC_ADC_RESERVED_ACC_2, + MAX14577_MUIC_ADC_RESERVED_ACC_3, + MAX14577_MUIC_ADC_RESERVED_ACC_4, + MAX14577_MUIC_ADC_RESERVED_ACC_5, + MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2, + MAX14577_MUIC_ADC_PHONE_POWERED_DEV, + MAX14577_MUIC_ADC_TTY_CONVERTER, + MAX14577_MUIC_ADC_UART_CABLE, + MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG, + MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF, + MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON, + MAX14577_MUIC_ADC_AV_CABLE_NOLOAD, + MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG, + MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF, + MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON, + MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1, /* with Remote and Simple Ctrl */ + MAX14577_MUIC_ADC_OPEN, +}; + +/* max14577 MUIC device support below list of accessories(external connector) */ +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_TA, + EXTCON_CABLE_FAST_CHARGER, + EXTCON_CABLE_SLOW_CHARGER, + EXTCON_CABLE_CHARGE_DOWNSTREAM, + EXTCON_CABLE_JIG_USB_ON, + EXTCON_CABLE_JIG_USB_OFF, + EXTCON_CABLE_JIG_UART_OFF, + EXTCON_CABLE_JIG_UART_ON, + + _EXTCON_CABLE_NUM, +}; + +static const char *max14577_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_TA] = "TA", + [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", + [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON", + [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF", + [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF", + [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON", + + NULL, +}; + +/* + * max14577_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max14577 MUIC + * @time: the debounce time of ADC + */ +static int max14577_muic_set_debounce_time(struct max14577_muic_info *info, + enum max14577_muic_adc_debounce_time time) +{ + u8 ret; + + switch (time) { + case ADC_DEBOUNCE_TIME_5MS: + case ADC_DEBOUNCE_TIME_10MS: + case ADC_DEBOUNCE_TIME_25MS: + case ADC_DEBOUNCE_TIME_38_62MS: + ret = max14577_update_reg(info->max14577->regmap, + MAX14577_MUIC_REG_CONTROL3, + CTRL3_ADCDBSET_MASK, + time << CTRL3_ADCDBSET_SHIFT); + if (ret) { + dev_err(info->dev, "failed to set ADC debounce time\n"); + return ret; + } + break; + default: + dev_err(info->dev, "invalid ADC debounce time\n"); + return -EINVAL; + } + + return 0; +}; + +/* + * max14577_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max14577 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max14577 MUIC device share outside H/W line among a varity of cables + * so, this function set internal path of H/W line according to the type of + * attached cable. + */ +static int max14577_muic_set_path(struct max14577_muic_info *info, + u8 val, bool attached) +{ + int ret = 0; + u8 ctrl1, ctrl2 = 0; + + /* Set open state to path before changing hw path */ + ret = max14577_update_reg(info->max14577->regmap, + MAX14577_MUIC_REG_CONTROL1, + CLEAR_IDBEN_MICEN_MASK, CTRL1_SW_OPEN); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return ret; + } + + if (attached) + ctrl1 = val; + else + ctrl1 = CTRL1_SW_OPEN; + + ret = max14577_update_reg(info->max14577->regmap, + MAX14577_MUIC_REG_CONTROL1, + CLEAR_IDBEN_MICEN_MASK, ctrl1); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return ret; + } + + if (attached) + ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ + else + ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ + + ret = max14577_update_reg(info->max14577->regmap, + MAX14577_REG_CONTROL2, + CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return ret; + } + + dev_dbg(info->dev, + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", + ctrl1, ctrl2, attached ? "attached" : "detached"); + + return 0; +} + +/* + * max14577_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max14577 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - max14577_CABLE_GROUP_ADC + * - max14577_CABLE_GROUP_CHG + */ +static int max14577_muic_get_cable_type(struct max14577_muic_info *info, + enum max14577_muic_cable_group group, bool *attached) +{ + int cable_type = 0; + int adc; + int chg_type; + + switch (group) { + case MAX14577_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[MAX14577_MUIC_STATUS1] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX14577_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX14577_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX14577_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[MAX14577_MUIC_STATUS2] & + STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX14577_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX14577_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + +static int max14577_muic_jig_handler(struct max14577_muic_info *info, + int cable_type, bool attached) +{ + char cable_name[32]; + int ret = 0; + u8 path = CTRL1_SW_OPEN; + + dev_dbg(info->dev, + "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-OFF"); + path = CTRL1_SW_USB; + break; + case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-ON"); + path = CTRL1_SW_USB; + break; + case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ + /* PATH:AP_UART */ + strcpy(cable_name, "JIG-UART-OFF"); + path = CTRL1_SW_UART; + break; + default: + dev_err(info->dev, "failed to detect %s jig cable\n", + attached ? "attached" : "detached"); + return -EINVAL; + } + + ret = max14577_muic_set_path(info, path, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, cable_name, attached); + + return 0; +} + +static int max14577_muic_adc_handler(struct max14577_muic_info *info) +{ + int cable_type; + bool attached; + int ret = 0; + + /* Check accessory state which is either detached or attached */ + cable_type = max14577_muic_get_cable_type(info, + MAX14577_CABLE_GROUP_ADC, &attached); + + dev_dbg(info->dev, + "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", + attached ? "attached" : "detached", cable_type, + info->prev_cable_type); + + switch (cable_type) { + case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: + case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: + /* JIG */ + ret = max14577_muic_jig_handler(info, cable_type, attached); + if (ret < 0) + return ret; + break; + case MAX14577_MUIC_ADC_GROUND: + case MAX14577_MUIC_ADC_SEND_END_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S1_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S2_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S3_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S4_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S5_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S6_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S7_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S8_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S9_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S10_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S11_BUTTON: + case MAX14577_MUIC_ADC_REMOTE_S12_BUTTON: + case MAX14577_MUIC_ADC_RESERVED_ACC_1: + case MAX14577_MUIC_ADC_RESERVED_ACC_2: + case MAX14577_MUIC_ADC_RESERVED_ACC_3: + case MAX14577_MUIC_ADC_RESERVED_ACC_4: + case MAX14577_MUIC_ADC_RESERVED_ACC_5: + case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2: + case MAX14577_MUIC_ADC_PHONE_POWERED_DEV: + case MAX14577_MUIC_ADC_TTY_CONVERTER: + case MAX14577_MUIC_ADC_UART_CABLE: + case MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG: + case MAX14577_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG: + case MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON: + case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1: + /* + * This accessory isn't used in general case if it is specially + * needed to detect additional accessory, should implement + * proper operation when this accessory is attached/detached. + */ + dev_info(info->dev, + "accessory is %s but it isn't used (adc:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EAGAIN; + default: + dev_err(info->dev, + "failed to detect %s accessory (adc:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EINVAL; + } + + return 0; +} + +static int max14577_muic_chg_handler(struct max14577_muic_info *info) +{ + int chg_type; + bool attached; + int ret = 0; + + chg_type = max14577_muic_get_cable_type(info, + MAX14577_CABLE_GROUP_CHG, &attached); + + dev_dbg(info->dev, + "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", + attached ? "attached" : "detached", + chg_type, info->prev_chg_type); + + switch (chg_type) { + case MAX14577_CHARGER_TYPE_USB: + /* PATH:AP_USB */ + ret = max14577_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "USB", attached); + break; + case MAX14577_CHARGER_TYPE_DEDICATED_CHG: + extcon_set_cable_state(info->edev, "TA", attached); + break; + case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: + extcon_set_cable_state(info->edev, + "Charge-downstream", attached); + break; + case MAX14577_CHARGER_TYPE_SPECIAL_500MA: + extcon_set_cable_state(info->edev, "Slow-charger", attached); + break; + case MAX14577_CHARGER_TYPE_SPECIAL_1A: + extcon_set_cable_state(info->edev, "Fast-charger", attached); + break; + case MAX14577_CHARGER_TYPE_NONE: + case MAX14577_CHARGER_TYPE_DEAD_BATTERY: + break; + default: + dev_err(info->dev, + "failed to detect %s accessory (chg_type:0x%x)\n", + attached ? "attached" : "detached", chg_type); + return -EINVAL; + } + + return 0; +} + +static void max14577_muic_irq_work(struct work_struct *work) +{ + struct max14577_muic_info *info = container_of(work, + struct max14577_muic_info, irq_work); + int ret = 0; + + if (!info->edev) + return; + + mutex_lock(&info->mutex); + + ret = max14577_bulk_read(info->max14577->regmap, + MAX14577_MUIC_REG_STATUS1, info->status, 2); + if (ret) { + dev_err(info->dev, "failed to read MUIC register\n"); + mutex_unlock(&info->mutex); + return; + } + + if (info->irq_adc) { + ret = max14577_muic_adc_handler(info); + info->irq_adc = false; + } + if (info->irq_chg) { + ret = max14577_muic_chg_handler(info); + info->irq_chg = false; + } + + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + + mutex_unlock(&info->mutex); + + return; +} + +/* + * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. + * Returns 0 if irq_type does not match registered IRQ for this device type. + */ +static int max14577_parse_irq(struct max14577_muic_info *info, int irq_type) +{ + switch (irq_type) { + case MAX14577_IRQ_INT1_ADC: + case MAX14577_IRQ_INT1_ADCLOW: + case MAX14577_IRQ_INT1_ADCERR: + /* Handle all of accessory except for + type of charger accessory */ + info->irq_adc = true; + return 1; + case MAX14577_IRQ_INT2_CHGTYP: + case MAX14577_IRQ_INT2_CHGDETRUN: + case MAX14577_IRQ_INT2_DCDTMR: + case MAX14577_IRQ_INT2_DBCHG: + case MAX14577_IRQ_INT2_VBVOLT: + /* Handle charger accessory */ + info->irq_chg = true; + return 1; + default: + return 0; + } +} + +/* + * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. + * Returns 0 if irq_type does not match registered IRQ for this device type. + */ +static int max77836_parse_irq(struct max14577_muic_info *info, int irq_type) +{ + /* First check common max14577 interrupts */ + if (max14577_parse_irq(info, irq_type)) + return 1; + + switch (irq_type) { + case MAX77836_IRQ_INT1_ADC1K: + info->irq_adc = true; + return 1; + case MAX77836_IRQ_INT2_VIDRM: + /* Handle charger accessory */ + info->irq_chg = true; + return 1; + default: + return 0; + } +} + +static irqreturn_t max14577_muic_irq_handler(int irq, void *data) +{ + struct max14577_muic_info *info = data; + int i, irq_type = -1; + bool irq_parsed; + + /* + * We may be called multiple times for different nested IRQ-s. + * Including changes in INT1_ADC and INT2_CGHTYP at once. + * However we only need to know whether it was ADC, charger + * or both interrupts so decode IRQ and turn on proper flags. + */ + for (i = 0; i < info->muic_irqs_num; i++) + if (irq == info->muic_irqs[i].virq) + irq_type = info->muic_irqs[i].irq; + + switch (info->max14577->dev_type) { + case MAXIM_DEVICE_TYPE_MAX77836: + irq_parsed = max77836_parse_irq(info, irq_type); + break; + case MAXIM_DEVICE_TYPE_MAX14577: + default: + irq_parsed = max14577_parse_irq(info, irq_type); + break; + } + + if (!irq_parsed) { + dev_err(info->dev, "muic interrupt: irq %d occurred, skipped\n", + irq_type); + return IRQ_HANDLED; + } + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static int max14577_muic_detect_accessory(struct max14577_muic_info *info) +{ + int ret = 0; + int adc; + int chg_type; + bool attached; + + mutex_lock(&info->mutex); + + /* Read STATUSx register to detect accessory */ + ret = max14577_bulk_read(info->max14577->regmap, + MAX14577_MUIC_REG_STATUS1, info->status, 2); + if (ret) { + dev_err(info->dev, "failed to read MUIC register\n"); + mutex_unlock(&info->mutex); + return ret; + } + + adc = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX14577_MUIC_ADC_OPEN) { + ret = max14577_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + chg_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX14577_CHARGER_TYPE_NONE) { + ret = max14577_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + mutex_unlock(&info->mutex); + + return 0; +} + +static void max14577_muic_detect_cable_wq(struct work_struct *work) +{ + struct max14577_muic_info *info = container_of(to_delayed_work(work), + struct max14577_muic_info, wq_detcable); + + max14577_muic_detect_accessory(info); +} + +static int max14577_muic_probe(struct platform_device *pdev) +{ + struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); + struct max14577_muic_info *info; + int delay_jiffies; + int ret; + int i; + u8 id; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + info->dev = &pdev->dev; + info->max14577 = max14577; + + platform_set_drvdata(pdev, info); + mutex_init(&info->mutex); + + INIT_WORK(&info->irq_work, max14577_muic_irq_work); + + switch (max14577->dev_type) { + case MAXIM_DEVICE_TYPE_MAX77836: + info->muic_irqs = max77836_muic_irqs; + info->muic_irqs_num = ARRAY_SIZE(max77836_muic_irqs); + break; + case MAXIM_DEVICE_TYPE_MAX14577: + default: + info->muic_irqs = max14577_muic_irqs; + info->muic_irqs_num = ARRAY_SIZE(max14577_muic_irqs); + } + + /* Support irq domain for max14577 MUIC device */ + for (i = 0; i < info->muic_irqs_num; i++) { + struct max14577_muic_irq *muic_irq = &info->muic_irqs[i]; + unsigned int virq = 0; + + virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq); + if (virq <= 0) + return -EINVAL; + muic_irq->virq = virq; + + ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, + max14577_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); + if (ret) { + dev_err(&pdev->dev, + "failed: irq request (IRQ: %d," + " error :%d)\n", + muic_irq->irq, ret); + return ret; + } + } + + /* Initialize extcon device */ + info->edev = devm_extcon_dev_allocate(&pdev->dev, + max14577_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); + return -ENOMEM; + } + + info->edev->name = dev_name(&pdev->dev); + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return ret; + } + + /* Default h/w line path */ + info->path_usb = CTRL1_SW_USB; + info->path_uart = CTRL1_SW_UART; + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + + /* Set initial path for UART */ + max14577_muic_set_path(info, info->path_uart, true); + + /* Check revision number of MUIC device*/ + ret = max14577_read_reg(info->max14577->regmap, + MAX14577_REG_DEVICEID, &id); + if (ret < 0) { + dev_err(&pdev->dev, "failed to read revision number\n"); + return ret; + } + dev_info(info->dev, "device ID : 0x%x\n", id); + + /* Set ADC debounce time */ + max14577_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); + + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max14577_muic_detect_cable_wq); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + delay_jiffies); + + return ret; +} + +static int max14577_muic_remove(struct platform_device *pdev) +{ + struct max14577_muic_info *info = platform_get_drvdata(pdev); + + cancel_work_sync(&info->irq_work); + + return 0; +} + +static const struct platform_device_id max14577_muic_id[] = { + { "max14577-muic", MAXIM_DEVICE_TYPE_MAX14577, }, + { "max77836-muic", MAXIM_DEVICE_TYPE_MAX77836, }, + { } +}; +MODULE_DEVICE_TABLE(platform, max14577_muic_id); + +static struct platform_driver max14577_muic_driver = { + .driver = { + .name = "max14577-muic", + .owner = THIS_MODULE, + }, + .probe = max14577_muic_probe, + .remove = max14577_muic_remove, + .id_table = max14577_muic_id, +}; + +module_platform_driver(max14577_muic_driver); + +MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:extcon-max14577"); diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index b56bdaa27d4..2c7c3e19159 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -189,14 +189,17 @@ enum max77693_muic_acc_type { /* The below accessories have same ADC value so ADCLow and ADC1K bit is used to separate specific accessory */ - MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */ - MAX77693_MUIC_GND_MHL = 0x103, /* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */ - MAX77693_MUIC_GND_MHL_VB = 0x107, /* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */ + /* ADC|VBVolot|ADCLow|ADC1K| */ + MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */ + MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */ + MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */ + MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */ + MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */ }; -/* MAX77693 MUIC device support below list of accessories(external connector) */ +/* + * MAX77693 MUIC device support below list of accessories(external connector) + */ enum { EXTCON_CABLE_USB = 0, EXTCON_CABLE_USB_HOST, @@ -395,12 +398,12 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info, vbvolt >>= STATUS2_VBVOLT_SHIFT; /** - * [0x1][VBVolt][ADCLow][ADC1K] - * [0x1 0 0 0 ] : USB_OTG - * [0x1 1 0 0 ] : USB_OTG_VB - * [0x1 0 1 0 ] : Audio Video Cable with load - * [0x1 0 1 1 ] : MHL without charging connector - * [0x1 1 1 1 ] : MHL with charging connector + * [0x1|VBVolt|ADCLow|ADC1K] + * [0x1| 0| 0| 0] USB_OTG + * [0x1| 1| 0| 0] USB_OTG_VB + * [0x1| 0| 1| 0] Audio Video cable with load + * [0x1| 0| 1| 1] MHL without charging cable + * [0x1| 1| 1| 1] MHL with charging cable */ cable_type = ((0x1 << 8) | (vbvolt << 2) @@ -723,11 +726,11 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) if (ret < 0) return ret; break; - case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ - case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ - case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ - case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ - case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ /* * Button of DOCK device * - the Prev/Next/Volume Up/Volume Down/Play-Pause button @@ -815,19 +818,21 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) case MAX77693_MUIC_GND_MHL_VB: /* * MHL cable with MHL_TA(USB/TA) cable - * - MHL cable include two port(HDMI line and separate micro- - * usb port. When the target connect MHL cable, extcon driver - * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA - * cable is connected, extcon driver notify state to notifiee - * for charging battery. + * - MHL cable include two port(HDMI line and separate + * micro-usb port. When the target connect MHL cable, + * extcon driver check whether MHL_TA(USB/TA) cable is + * connected. If MHL_TA cable is connected, extcon + * driver notify state to notifiee for charging battery. * * Features of 'MHL_TA(USB/TA) with MHL cable' * - Support MHL - * - Support charging through micro-usb port without data connection + * - Support charging through micro-usb port without + * data connection */ extcon_set_cable_state(info->edev, "MHL_TA", attached); if (!cable_attached) - extcon_set_cable_state(info->edev, "MHL", cable_attached); + extcon_set_cable_state(info->edev, + "MHL", cable_attached); break; } @@ -839,47 +844,51 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ /* * Dock-Audio device with USB/TA cable - * - Dock device include two port(Dock-Audio and micro-usb - * port). When the target connect Dock-Audio device, extcon - * driver check whether USB/TA cable is connected. If USB/TA - * cable is connected, extcon driver notify state to notifiee - * for charging battery. + * - Dock device include two port(Dock-Audio and micro- + * usb port). When the target connect Dock-Audio device, + * extcon driver check whether USB/TA cable is connected + * or not. If USB/TA cable is connected, extcon driver + * notify state to notifiee for charging battery. * * Features of 'USB/TA cable with Dock-Audio device' * - Support external output feature of audio. - * - Support charging through micro-usb port without data - * connection. + * - Support charging through micro-usb port without + * data connection. */ extcon_set_cable_state(info->edev, "USB", attached); if (!cable_attached) - extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached); + extcon_set_cable_state(info->edev, "Dock-Audio", + cable_attached); break; case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ /* * Dock-Smart device with USB/TA cable * - Dock-Desk device include three type of cable which * are HDMI, USB for mouse/keyboard and micro-usb port - * for USB/TA cable. Dock-Smart device need always exteranl - * power supply(USB/TA cable through micro-usb cable). Dock- - * Smart device support screen output of target to separate - * monitor and mouse/keyboard for desktop mode. + * for USB/TA cable. Dock-Smart device need always + * exteranl power supply(USB/TA cable through micro-usb + * cable). Dock-Smart device support screen output of + * target to separate monitor and mouse/keyboard for + * desktop mode. * * Features of 'USB/TA cable with Dock-Smart device' * - Support MHL * - Support external output feature of audio - * - Support charging through micro-usb port without data - * connection if TA cable is connected to target. - * - Support charging and data connection through micro-usb port - * if USB cable is connected between target and host - * device. + * - Support charging through micro-usb port without + * data connection if TA cable is connected to target. + * - Support charging and data connection through micro- + * usb port if USB cable is connected between target + * and host device * - Support OTG device (Mouse/Keyboard) */ - ret = max77693_muic_set_path(info, info->path_usb, attached); + ret = max77693_muic_set_path(info, info->path_usb, + attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "Dock-Smart", + attached); extcon_set_cable_state(info->edev, "MHL", attached); break; @@ -889,25 +898,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) switch (chg_type) { case MAX77693_CHARGER_TYPE_NONE: /* - * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable - * is attached, muic device happen below two interrupt. - * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio. - * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable - * connected to MHL or Dock-Audio. - * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt - * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt. + * When MHL(with USB/TA cable) or Dock-Audio with USB/TA + * cable is attached, muic device happen below two irq. + * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting + * MHL/Dock-Audio. + * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting + * USB/TA cable connected to MHL or Dock-Audio. + * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC + * irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq. * - * If user attach MHL (with USB/TA cable and immediately detach - * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP - * interrupt is happened, USB/TA cable remain connected state to - * target. But USB/TA cable isn't connected to target. The user - * be face with unusual action. So, driver should check this - * situation in spite of, that previous charger type is N/A. + * If user attach MHL (with USB/TA cable and immediately + * detach MHL with USB/TA cable before MAX77693_MUIC_IRQ + * _INT2_CHGTYP irq is happened, USB/TA cable remain + * connected state to target. But USB/TA cable isn't + * connected to target. The user be face with unusual + * action. So, driver should check this situation in + * spite of, that previous charger type is N/A. */ break; case MAX77693_CHARGER_TYPE_USB: /* Only USB cable, PATH:AP_USB */ - ret = max77693_muic_set_path(info, info->path_usb, attached); + ret = max77693_muic_set_path(info, info->path_usb, + attached); if (ret < 0) return ret; @@ -953,7 +965,7 @@ static void max77693_muic_irq_work(struct work_struct *work) mutex_lock(&info->mutex); - for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) if (info->irq == muic_irqs[i].virq) irq_type = muic_irqs[i].irq; @@ -1163,24 +1175,24 @@ static int max77693_muic_probe(struct platform_device *pdev) } /* Initialize extcon device */ - info->edev = devm_kzalloc(&pdev->dev, sizeof(struct extcon_dev), - GFP_KERNEL); - if (!info->edev) { + info->edev = devm_extcon_dev_allocate(&pdev->dev, + max77693_extcon_cable); + if (IS_ERR(info->edev)) { dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); ret = -ENOMEM; goto err_irq; } info->edev->name = DEV_NAME; - info->edev->supported_cable = max77693_extcon_cable; - ret = extcon_dev_register(info->edev, NULL); + info->edev->dev.parent = &pdev->dev; + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret) { dev_err(&pdev->dev, "failed to register extcon device\n"); goto err_irq; } - /* Initialize MUIC register by using platform data or default data */ - if (pdata->muic_data) { + if (pdata && pdata->muic_data) { init_data = pdata->muic_data->init_data; num_init_data = pdata->muic_data->num_init_data; } else { @@ -1188,7 +1200,7 @@ static int max77693_muic_probe(struct platform_device *pdev) num_init_data = ARRAY_SIZE(default_init_data); } - for (i = 0 ; i < num_init_data ; i++) { + for (i = 0; i < num_init_data; i++) { enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR; @@ -1213,8 +1225,9 @@ static int max77693_muic_probe(struct platform_device *pdev) = init_data[i].data; } - if (pdata->muic_data) { - struct max77693_muic_platform_data *muic_pdata = pdata->muic_data; + if (pdata && pdata->muic_data) { + struct max77693_muic_platform_data *muic_pdata + = pdata->muic_data; /* * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB @@ -1253,7 +1266,7 @@ static int max77693_muic_probe(struct platform_device *pdev) MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); - goto err_extcon; + goto err_irq; } dev_info(info->dev, "device ID : 0x%x\n", id); @@ -1269,12 +1282,11 @@ static int max77693_muic_probe(struct platform_device *pdev) * driver should notify cable state to upper layer. */ INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq); - schedule_delayed_work(&info->wq_detcable, delay_jiffies); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + delay_jiffies); return ret; -err_extcon: - extcon_dev_unregister(info->edev); err_irq: while (--i >= 0) free_irq(muic_irqs[i].virq, info); @@ -1290,7 +1302,6 @@ static int max77693_muic_remove(struct platform_device *pdev) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); input_unregister_device(info->dock); - extcon_dev_unregister(info->edev); return 0; } diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 67d6738d85a..d9f7f1baaa0 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -426,7 +426,8 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info) break; case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: - ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, attached); + ret = max8997_muic_handle_usb(info, + MAX8997_USB_DEVICE, attached); if (ret < 0) return ret; break; @@ -504,7 +505,8 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info) } break; case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, "Charge-downstream", attached); + extcon_set_cable_state(info->edev, + "Charge-downstream", attached); break; case MAX8997_CHARGER_TYPE_DEDICATED_CHG: extcon_set_cable_state(info->edev, "TA", attached); @@ -537,7 +539,7 @@ static void max8997_muic_irq_work(struct work_struct *work) mutex_lock(&info->mutex); - for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) if (info->irq == muic_irqs[i].virq) irq_type = muic_irqs[i].irq; @@ -697,22 +699,22 @@ static int max8997_muic_probe(struct platform_device *pdev) } /* External connector */ - info->edev = devm_kzalloc(&pdev->dev, sizeof(struct extcon_dev), - GFP_KERNEL); - if (!info->edev) { + info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable); + if (IS_ERR(info->edev)) { dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); ret = -ENOMEM; goto err_irq; } info->edev->name = DEV_NAME; - info->edev->supported_cable = max8997_extcon_cable; - ret = extcon_dev_register(info->edev, NULL); + info->edev->dev.parent = &pdev->dev; + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret) { dev_err(&pdev->dev, "failed to register extcon device\n"); goto err_irq; } - if (pdata->muic_pdata) { + if (pdata && pdata->muic_pdata) { struct max8997_muic_platform_data *muic_pdata = pdata->muic_pdata; @@ -767,7 +769,8 @@ static int max8997_muic_probe(struct platform_device *pdev) * driver should notify cable state to upper layer. */ INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); - schedule_delayed_work(&info->wq_detcable, delay_jiffies); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + delay_jiffies); return 0; @@ -786,8 +789,6 @@ static int max8997_muic_remove(struct platform_device *pdev) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); - extcon_dev_unregister(info->edev); - return 0; } diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index b752a0ad7b6..7417ce84eb2 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/mfd/palmas.h> #include <linux/of.h> @@ -56,7 +57,8 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) { if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_VBUS; - extcon_set_cable_state(&palmas_usb->edev, "USB", true); + extcon_set_cable_state(palmas_usb->edev, "USB", true); + dev_info(palmas_usb->dev, "USB cable is attached\n"); } else { dev_dbg(palmas_usb->dev, "Spurious connect event detected\n"); @@ -64,7 +66,8 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) } else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) { if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state(&palmas_usb->edev, "USB", false); + extcon_set_cable_state(palmas_usb->edev, "USB", false); + dev_info(palmas_usb->dev, "USB cable is detached\n"); } else { dev_dbg(palmas_usb->dev, "Spurious disconnect event detected\n"); @@ -76,36 +79,40 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) { - unsigned int set; + unsigned int set, id_src; struct palmas_usb *palmas_usb = _palmas_usb; palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_ID_INT_LATCH_SET, &set); + palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE, + PALMAS_USB_ID_INT_SRC, &id_src); - if (set & PALMAS_USB_ID_INT_SRC_ID_GND) { - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_INT_EN_HI_SET, - PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT); - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_INT_EN_HI_CLR, - PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); + if ((set & PALMAS_USB_ID_INT_SRC_ID_GND) && + (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) { palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); palmas_usb->linkstat = PALMAS_USB_STATE_ID; - extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true); - } else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) { - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_INT_EN_HI_SET, - PALMAS_USB_ID_INT_EN_HI_SET_ID_GND); - palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, - PALMAS_USB_ID_INT_EN_HI_CLR, - PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); + extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true); + dev_info(palmas_usb->dev, "USB-HOST cable is attached\n"); + } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) && + (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) { palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false); + extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false); + dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); + } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) && + (!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) { + palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; + extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false); + dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); + } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) && + (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) { + palmas_usb->linkstat = PALMAS_USB_STATE_ID; + extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true); + dev_info(palmas_usb->dev, " USB-HOST cable is attached\n"); } return IRQ_HANDLED; @@ -122,38 +129,46 @@ static void palmas_enable_irq(struct palmas_usb *palmas_usb) palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_ID_INT_EN_HI_SET, - PALMAS_USB_ID_INT_EN_HI_SET_ID_GND); + PALMAS_USB_ID_INT_EN_HI_SET_ID_GND | + PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT); - palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb); + if (palmas_usb->enable_vbus_detection) + palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb); /* cold plug for host mode needs this delay */ - msleep(30); - palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb); + if (palmas_usb->enable_id_detection) { + msleep(30); + palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb); + } } static int palmas_usb_probe(struct platform_device *pdev) { struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); - struct palmas_usb_platform_data *pdata = pdev->dev.platform_data; + struct palmas_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; struct palmas_usb *palmas_usb; int status; - if (node && !pdata) { - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - - if (!pdata) - return -ENOMEM; - - pdata->wakeup = of_property_read_bool(node, "ti,wakeup"); - } else if (!pdata) { - return -EINVAL; - } - palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL); if (!palmas_usb) return -ENOMEM; + if (node && !pdata) { + palmas_usb->wakeup = of_property_read_bool(node, "ti,wakeup"); + palmas_usb->enable_id_detection = of_property_read_bool(node, + "ti,enable-id-detection"); + palmas_usb->enable_vbus_detection = of_property_read_bool(node, + "ti,enable-vbus-detection"); + } else { + palmas_usb->wakeup = true; + palmas_usb->enable_id_detection = true; + palmas_usb->enable_vbus_detection = true; + + if (pdata) + palmas_usb->wakeup = pdata->wakeup; + } + palmas->usb = palmas_usb; palmas_usb->palmas = palmas; @@ -168,62 +183,106 @@ static int palmas_usb_probe(struct platform_device *pdev) palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data, PALMAS_VBUS_IRQ); - palmas_usb_wakeup(palmas, pdata->wakeup); + palmas_usb_wakeup(palmas, palmas_usb->wakeup); platform_set_drvdata(pdev, palmas_usb); - palmas_usb->edev.name = "palmas-usb"; - palmas_usb->edev.supported_cable = palmas_extcon_cable; - palmas_usb->edev.mutually_exclusive = mutually_exclusive; + palmas_usb->edev = devm_extcon_dev_allocate(&pdev->dev, + palmas_extcon_cable); + if (IS_ERR(palmas_usb->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL); + palmas_usb->edev->dev.parent = palmas_usb->dev; + palmas_usb->edev->mutually_exclusive = mutually_exclusive; - status = extcon_dev_register(&palmas_usb->edev, palmas_usb->dev); + status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev); if (status) { dev_err(&pdev->dev, "failed to register extcon device\n"); + kfree(palmas_usb->edev->name); return status; } - status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->id_irq, - NULL, palmas_id_irq_handler, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "palmas_usb_id", palmas_usb); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", + if (palmas_usb->enable_id_detection) { + status = devm_request_threaded_irq(palmas_usb->dev, + palmas_usb->id_irq, + NULL, palmas_id_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT | IRQF_EARLY_RESUME, + "palmas_usb_id", palmas_usb); + if (status < 0) { + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", palmas_usb->id_irq, status); - goto fail_extcon; + kfree(palmas_usb->edev->name); + return status; + } } - status = devm_request_threaded_irq(palmas_usb->dev, - palmas_usb->vbus_irq, NULL, palmas_vbus_irq_handler, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "palmas_usb_vbus", palmas_usb); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", + if (palmas_usb->enable_vbus_detection) { + status = devm_request_threaded_irq(palmas_usb->dev, + palmas_usb->vbus_irq, NULL, + palmas_vbus_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT | IRQF_EARLY_RESUME, + "palmas_usb_vbus", palmas_usb); + if (status < 0) { + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", palmas_usb->vbus_irq, status); - goto fail_extcon; + kfree(palmas_usb->edev->name); + return status; + } } palmas_enable_irq(palmas_usb); - + device_set_wakeup_capable(&pdev->dev, true); return 0; - -fail_extcon: - extcon_dev_unregister(&palmas_usb->edev); - - return status; } static int palmas_usb_remove(struct platform_device *pdev) { struct palmas_usb *palmas_usb = platform_get_drvdata(pdev); - extcon_dev_unregister(&palmas_usb->edev); + kfree(palmas_usb->edev->name); return 0; } +#ifdef CONFIG_PM_SLEEP +static int palmas_usb_suspend(struct device *dev) +{ + struct palmas_usb *palmas_usb = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) { + if (palmas_usb->enable_vbus_detection) + enable_irq_wake(palmas_usb->vbus_irq); + if (palmas_usb->enable_id_detection) + enable_irq_wake(palmas_usb->id_irq); + } + return 0; +} + +static int palmas_usb_resume(struct device *dev) +{ + struct palmas_usb *palmas_usb = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) { + if (palmas_usb->enable_vbus_detection) + disable_irq_wake(palmas_usb->vbus_irq); + if (palmas_usb->enable_id_detection) + disable_irq_wake(palmas_usb->id_irq); + } + return 0; +}; +#endif + +static SIMPLE_DEV_PM_OPS(palmas_pm_ops, palmas_usb_suspend, palmas_usb_resume); + static struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-usb", }, + { .compatible = "ti,palmas-usb-vid", }, { .compatible = "ti,twl6035-usb", }, + { .compatible = "ti,twl6035-usb-vid", }, { /* end */ } }; @@ -234,6 +293,7 @@ static struct platform_driver palmas_usb_driver = { .name = "palmas-usb", .of_match_table = of_palmas_match_tbl, .owner = THIS_MODULE, + .pm = &palmas_pm_ops, }, }; |