diff options
Diffstat (limited to 'drivers/extcon/extcon-max77693.c')
| -rw-r--r-- | drivers/extcon/extcon-max77693.c | 333 |
1 files changed, 205 insertions, 128 deletions
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index fb6527607a1..2c7c3e19159 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -32,6 +32,38 @@ #define DEV_NAME "max77693-muic" #define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ +/* + * Default value of MAX77693 register to bring up MUIC device. + * If user don't set some initial value for MUIC device through platform data, + * extcon-max77693 driver use 'default_init_data' to bring up base operation + * of MAX77693 MUIC device. + */ +static struct max77693_reg_data default_init_data[] = { + { + /* STATUS2 - [3]ChgDetRun */ + .addr = MAX77693_MUIC_REG_STATUS2, + .data = STATUS2_CHGDETRUN_MASK, + }, { + /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */ + .addr = MAX77693_MUIC_REG_INTMASK1, + .data = INTMASK1_ADC1K_MASK + | INTMASK1_ADC_MASK, + }, { + /* INTMASK2 - Unmask [0]ChgTypM */ + .addr = MAX77693_MUIC_REG_INTMASK2, + .data = INTMASK2_CHGTYP_MASK, + }, { + /* INTMASK3 - Mask all of interrupts */ + .addr = MAX77693_MUIC_REG_INTMASK3, + .data = 0x0, + }, { + /* CDETCTRL2 */ + .addr = MAX77693_MUIC_REG_CDETCTRL2, + .data = CDETCTRL2_VIDRMEN_MASK + | CDETCTRL2_DXOVPEN_MASK, + }, +}; + enum max77693_muic_adc_debounce_time { ADC_DEBOUNCE_TIME_5MS = 0, ADC_DEBOUNCE_TIME_10MS, @@ -157,14 +189,17 @@ enum max77693_muic_acc_type { /* The below accessories have same ADC value so ADCLow and ADC1K bit is used to separate specific accessory */ - MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */ - MAX77693_MUIC_GND_MHL = 0x103, /* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */ - MAX77693_MUIC_GND_MHL_VB = 0x107, /* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */ + /* ADC|VBVolot|ADCLow|ADC1K| */ + MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */ + MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */ + MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */ + MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */ + MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */ }; -/* MAX77693 MUIC device support below list of accessories(external connector) */ +/* + * MAX77693 MUIC device support below list of accessories(external connector) + */ enum { EXTCON_CABLE_USB = 0, EXTCON_CABLE_USB_HOST, @@ -185,7 +220,7 @@ enum { _EXTCON_CABLE_NUM, }; -const char *max77693_extcon_cable[] = { +static const char *max77693_extcon_cable[] = { [EXTCON_CABLE_USB] = "USB", [EXTCON_CABLE_USB_HOST] = "USB-Host", [EXTCON_CABLE_TA] = "TA", @@ -224,16 +259,17 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL3, time << CONTROL3_ADCDBSET_SHIFT, CONTROL3_ADCDBSET_MASK); - if (ret) + if (ret) { dev_err(info->dev, "failed to set ADC debounce time\n"); + return ret; + } break; default: dev_err(info->dev, "invalid ADC debounce time\n"); - ret = -EINVAL; - break; + return -EINVAL; } - return ret; + return 0; }; /* @@ -261,7 +297,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return ret; } if (attached) @@ -274,14 +310,14 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return ret; } dev_info(info->dev, "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", ctrl1, ctrl2, attached ? "attached" : "detached"); -out: - return ret; + + return 0; } /* @@ -362,12 +398,12 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info, vbvolt >>= STATUS2_VBVOLT_SHIFT; /** - * [0x1][VBVolt][ADCLow][ADC1K] - * [0x1 0 0 0 ] : USB_OTG - * [0x1 1 0 0 ] : USB_OTG_VB - * [0x1 0 1 0 ] : Audio Video Cable with load - * [0x1 0 1 1 ] : MHL without charging connector - * [0x1 1 1 1 ] : MHL with charging connector + * [0x1|VBVolt|ADCLow|ADC1K] + * [0x1| 0| 0| 0] USB_OTG + * [0x1| 1| 0| 0] USB_OTG_VB + * [0x1| 0| 1| 0] Audio Video cable with load + * [0x1| 0| 1| 1] MHL without charging cable + * [0x1| 1| 1| 1] MHL with charging cable */ cable_type = ((0x1 << 8) | (vbvolt << 2) @@ -503,6 +539,10 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, if (!attached) extcon_set_cable_state(info->edev, "USB", false); break; + default: + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; } /* Dock-Car/Desk/Audio, PATH:AUDIO */ @@ -520,7 +560,6 @@ static int max77693_muic_dock_button_handler(struct max77693_muic_info *info, { struct input_dev *dock = info->dock; unsigned int code; - int ret = 0; switch (button_type) { case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1 @@ -550,14 +589,12 @@ static int max77693_muic_dock_button_handler(struct max77693_muic_info *info, dev_err(info->dev, "failed to detect %s key (adc:0x%x)\n", attached ? "pressed" : "released", button_type); - ret = -EINVAL; - goto out; + return -EINVAL; } input_event(dock, EV_KEY, code, attached); input_sync(dock); -out: return 0; } @@ -576,14 +613,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) /* USB_OTG, PATH: AP_USB */ ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "USB-Host", attached); break; case MAX77693_MUIC_GND_AV_CABLE_LOAD: /* Audio Video Cable with load, PATH:AUDIO */ ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "Audio-video-load", attached); break; @@ -593,14 +630,12 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) extcon_set_cable_state(info->edev, "MHL", attached); break; default: - dev_err(info->dev, "failed to detect %s accessory\n", + dev_err(info->dev, "failed to detect %s cable of gnd type\n", attached ? "attached" : "detached"); - ret = -EINVAL; - break; + return -EINVAL; } -out: - return ret; + return 0; } static int max77693_muic_jig_handler(struct max77693_muic_info *info, @@ -630,15 +665,19 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info, strcpy(cable_name, "JIG-UART-OFF"); path = CONTROL1_SW_UART; break; + default: + dev_err(info->dev, "failed to detect %s jig cable\n", + attached ? "attached" : "detached"); + return -EINVAL; } ret = max77693_muic_set_path(info, path, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, cable_name, attached); -out: - return ret; + + return 0; } static int max77693_muic_adc_handler(struct max77693_muic_info *info) @@ -668,7 +707,7 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) /* JIG */ ret = max77693_muic_jig_handler(info, cable_type, attached); if (ret < 0) - goto out; + return ret; break; case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ @@ -685,13 +724,13 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) */ ret = max77693_muic_dock_handler(info, cable_type, attached); if (ret < 0) - goto out; + return ret; break; - case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ - case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ - case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ - case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ - case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ /* * Button of DOCK device * - the Prev/Next/Volume Up/Volume Down/Play-Pause button @@ -710,7 +749,7 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) ret = max77693_muic_dock_button_handler(info, button_type, attached); if (ret < 0) - goto out; + return ret; break; case MAX77693_MUIC_ADC_SEND_END_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON: @@ -738,17 +777,15 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) dev_info(info->dev, "accessory is %s but it isn't used (adc:0x%x)\n", attached ? "attached" : "detached", cable_type); - goto out; + return -EAGAIN; default: dev_err(info->dev, "failed to detect %s accessory (adc:0x%x)\n", attached ? "attached" : "detached", cable_type); - ret = -EINVAL; - goto out; + return -EINVAL; } -out: - return ret; + return 0; } static int max77693_muic_chg_handler(struct max77693_muic_info *info) @@ -781,19 +818,21 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) case MAX77693_MUIC_GND_MHL_VB: /* * MHL cable with MHL_TA(USB/TA) cable - * - MHL cable include two port(HDMI line and separate micro- - * usb port. When the target connect MHL cable, extcon driver - * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA - * cable is connected, extcon driver notify state to notifiee - * for charging battery. + * - MHL cable include two port(HDMI line and separate + * micro-usb port. When the target connect MHL cable, + * extcon driver check whether MHL_TA(USB/TA) cable is + * connected. If MHL_TA cable is connected, extcon + * driver notify state to notifiee for charging battery. * * Features of 'MHL_TA(USB/TA) with MHL cable' * - Support MHL - * - Support charging through micro-usb port without data connection + * - Support charging through micro-usb port without + * data connection */ extcon_set_cable_state(info->edev, "MHL_TA", attached); if (!cable_attached) - extcon_set_cable_state(info->edev, "MHL", cable_attached); + extcon_set_cable_state(info->edev, + "MHL", cable_attached); break; } @@ -805,47 +844,51 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ /* * Dock-Audio device with USB/TA cable - * - Dock device include two port(Dock-Audio and micro-usb - * port). When the target connect Dock-Audio device, extcon - * driver check whether USB/TA cable is connected. If USB/TA - * cable is connected, extcon driver notify state to notifiee - * for charging battery. + * - Dock device include two port(Dock-Audio and micro- + * usb port). When the target connect Dock-Audio device, + * extcon driver check whether USB/TA cable is connected + * or not. If USB/TA cable is connected, extcon driver + * notify state to notifiee for charging battery. * * Features of 'USB/TA cable with Dock-Audio device' * - Support external output feature of audio. - * - Support charging through micro-usb port without data - * connection. + * - Support charging through micro-usb port without + * data connection. */ extcon_set_cable_state(info->edev, "USB", attached); if (!cable_attached) - extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached); + extcon_set_cable_state(info->edev, "Dock-Audio", + cable_attached); break; case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ /* * Dock-Smart device with USB/TA cable * - Dock-Desk device include three type of cable which * are HDMI, USB for mouse/keyboard and micro-usb port - * for USB/TA cable. Dock-Smart device need always exteranl - * power supply(USB/TA cable through micro-usb cable). Dock- - * Smart device support screen output of target to separate - * monitor and mouse/keyboard for desktop mode. + * for USB/TA cable. Dock-Smart device need always + * exteranl power supply(USB/TA cable through micro-usb + * cable). Dock-Smart device support screen output of + * target to separate monitor and mouse/keyboard for + * desktop mode. * * Features of 'USB/TA cable with Dock-Smart device' * - Support MHL * - Support external output feature of audio - * - Support charging through micro-usb port without data - * connection if TA cable is connected to target. - * - Support charging and data connection through micro-usb port - * if USB cable is connected between target and host - * device. + * - Support charging through micro-usb port without + * data connection if TA cable is connected to target. + * - Support charging and data connection through micro- + * usb port if USB cable is connected between target + * and host device * - Support OTG device (Mouse/Keyboard) */ - ret = max77693_muic_set_path(info, info->path_usb, attached); + ret = max77693_muic_set_path(info, info->path_usb, + attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "Dock-Smart", + attached); extcon_set_cable_state(info->edev, "MHL", attached); break; @@ -855,25 +898,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) switch (chg_type) { case MAX77693_CHARGER_TYPE_NONE: /* - * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable - * is attached, muic device happen below two interrupt. - * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio. - * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable - * connected to MHL or Dock-Audio. - * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt - * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt. + * When MHL(with USB/TA cable) or Dock-Audio with USB/TA + * cable is attached, muic device happen below two irq. + * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting + * MHL/Dock-Audio. + * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting + * USB/TA cable connected to MHL or Dock-Audio. + * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC + * irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq. * - * If user attach MHL (with USB/TA cable and immediately detach - * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP - * interrupt is happened, USB/TA cable remain connected state to - * target. But USB/TA cable isn't connected to target. The user - * be face with unusual action. So, driver should check this - * situation in spite of, that previous charger type is N/A. + * If user attach MHL (with USB/TA cable and immediately + * detach MHL with USB/TA cable before MAX77693_MUIC_IRQ + * _INT2_CHGTYP irq is happened, USB/TA cable remain + * connected state to target. But USB/TA cable isn't + * connected to target. The user be face with unusual + * action. So, driver should check this situation in + * spite of, that previous charger type is N/A. */ break; case MAX77693_CHARGER_TYPE_USB: /* Only USB cable, PATH:AP_USB */ - ret = max77693_muic_set_path(info, info->path_usb, attached); + ret = max77693_muic_set_path(info, info->path_usb, + attached); if (ret < 0) return ret; @@ -919,7 +965,7 @@ static void max77693_muic_irq_work(struct work_struct *work) mutex_lock(&info->mutex); - for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) if (info->irq == muic_irqs[i].virq) irq_type = muic_irqs[i].irq; @@ -959,7 +1005,8 @@ static void max77693_muic_irq_work(struct work_struct *work) default: dev_err(info->dev, "muic interrupt: irq %d occurred\n", irq_type); - break; + mutex_unlock(&info->mutex); + return; } if (ret < 0) @@ -1000,28 +1047,34 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info) if (ret) { dev_err(info->dev, "failed to read MUIC register\n"); mutex_unlock(&info->mutex); - return -EINVAL; + return ret; } adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC, &attached); if (attached && adc != MAX77693_MUIC_ADC_OPEN) { ret = max77693_muic_adc_handler(info); - if (ret < 0) + if (ret < 0) { dev_err(info->dev, "Cannot detect accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } } chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG, &attached); if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) { ret = max77693_muic_chg_handler(info); - if (ret < 0) + if (ret < 0) { dev_err(info->dev, "Cannot detect charger accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } } mutex_unlock(&info->mutex); - return ret; + return 0; } static void max77693_muic_detect_cable_wq(struct work_struct *work) @@ -1036,8 +1089,9 @@ static int max77693_muic_probe(struct platform_device *pdev) { struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev); - struct max77693_muic_platform_data *muic_pdata = pdata->muic_data; struct max77693_muic_info *info; + struct max77693_reg_data *init_data; + int num_init_data; int delay_jiffies; int ret; int i; @@ -1066,7 +1120,7 @@ static int max77693_muic_probe(struct platform_device *pdev) } /* Register input device for button of dock device */ - info->dock = input_allocate_device(); + info->dock = devm_input_allocate_device(&pdev->dev); if (!info->dock) { dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__); return -ENOMEM; @@ -1121,30 +1175,40 @@ static int max77693_muic_probe(struct platform_device *pdev) } /* Initialize extcon device */ - info->edev = devm_kzalloc(&pdev->dev, sizeof(struct extcon_dev), - GFP_KERNEL); - if (!info->edev) { + info->edev = devm_extcon_dev_allocate(&pdev->dev, + max77693_extcon_cable); + if (IS_ERR(info->edev)) { dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); ret = -ENOMEM; goto err_irq; } info->edev->name = DEV_NAME; - info->edev->supported_cable = max77693_extcon_cable; - ret = extcon_dev_register(info->edev, NULL); + info->edev->dev.parent = &pdev->dev; + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret) { dev_err(&pdev->dev, "failed to register extcon device\n"); goto err_irq; } - /* Initialize MUIC register by using platform data */ - for (i = 0 ; i < muic_pdata->num_init_data ; i++) { - enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR; + /* Initialize MUIC register by using platform data or default data */ + if (pdata && pdata->muic_data) { + init_data = pdata->muic_data->init_data; + num_init_data = pdata->muic_data->num_init_data; + } else { + init_data = default_init_data; + num_init_data = ARRAY_SIZE(default_init_data); + } + + for (i = 0; i < num_init_data; i++) { + enum max77693_irq_source irq_src + = MAX77693_IRQ_GROUP_NR; max77693_write_reg(info->max77693->regmap_muic, - muic_pdata->init_data[i].addr, - muic_pdata->init_data[i].data); + init_data[i].addr, + init_data[i].data); - switch (muic_pdata->init_data[i].addr) { + switch (init_data[i].addr) { case MAX77693_MUIC_REG_INTMASK1: irq_src = MUIC_INT1; break; @@ -1158,22 +1222,41 @@ static int max77693_muic_probe(struct platform_device *pdev) if (irq_src < MAX77693_IRQ_GROUP_NR) info->max77693->irq_masks_cur[irq_src] - = muic_pdata->init_data[i].data; + = init_data[i].data; } - /* - * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB - * h/w path of COMP2/COMN1 on CONTROL1 register. - */ - if (muic_pdata->path_uart) - info->path_uart = muic_pdata->path_uart; - else - info->path_uart = CONTROL1_SW_UART; + if (pdata && pdata->muic_data) { + struct max77693_muic_platform_data *muic_pdata + = pdata->muic_data; - if (muic_pdata->path_usb) - info->path_usb = muic_pdata->path_usb; - else + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (muic_pdata->path_uart) + info->path_uart = muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (muic_pdata->path_usb) + info->path_usb = muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* + * Default delay time for detecting cable state + * after certain time. + */ + if (muic_pdata->detcable_delay_ms) + delay_jiffies = + msecs_to_jiffies(muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } else { info->path_usb = CONTROL1_SW_USB; + info->path_uart = CONTROL1_SW_UART; + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } /* Set initial path for UART */ max77693_muic_set_path(info, info->path_uart, true); @@ -1183,7 +1266,7 @@ static int max77693_muic_probe(struct platform_device *pdev) MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); - goto err_extcon; + goto err_irq; } dev_info(info->dev, "device ID : 0x%x\n", id); @@ -1199,16 +1282,11 @@ static int max77693_muic_probe(struct platform_device *pdev) * driver should notify cable state to upper layer. */ INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq); - if (muic_pdata->detcable_delay_ms) - delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms); - else - delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); - schedule_delayed_work(&info->wq_detcable, delay_jiffies); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + delay_jiffies); return ret; -err_extcon: - extcon_dev_unregister(info->edev); err_irq: while (--i >= 0) free_irq(muic_irqs[i].virq, info); @@ -1224,7 +1302,6 @@ static int max77693_muic_remove(struct platform_device *pdev) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); input_unregister_device(info->dock); - extcon_dev_unregister(info->edev); return 0; } |