diff options
Diffstat (limited to 'drivers/eisa')
| -rw-r--r-- | drivers/eisa/eisa-bus.c | 31 | ||||
| -rw-r--r-- | drivers/eisa/pci_eisa.c | 67 |
2 files changed, 64 insertions, 34 deletions
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c index 272a3ec3595..612afeaec3c 100644 --- a/drivers/eisa/eisa-bus.c +++ b/drivers/eisa/eisa-bus.c @@ -232,8 +232,10 @@ static int __init eisa_init_device(struct eisa_root_device *root, static int __init eisa_register_device(struct eisa_device *edev) { int rc = device_register(&edev->dev); - if (rc) + if (rc) { + put_device(&edev->dev); return rc; + } rc = device_create_file(&edev->dev, &dev_attr_signature); if (rc) @@ -275,18 +277,19 @@ static int __init eisa_request_resources(struct eisa_root_device *root, } if (slot) { + edev->res[i].name = NULL; edev->res[i].start = SLOT_ADDRESS(root, slot) + (i * 0x400); edev->res[i].end = edev->res[i].start + 0xff; edev->res[i].flags = IORESOURCE_IO; } else { + edev->res[i].name = NULL; edev->res[i].start = SLOT_ADDRESS(root, slot) + EISA_VENDOR_ID_OFFSET; edev->res[i].end = edev->res[i].start + 3; edev->res[i].flags = IORESOURCE_IO | IORESOURCE_BUSY; } - dev_printk(KERN_DEBUG, &edev->dev, "%pR\n", &edev->res[i]); if (request_resource(root->res, &edev->res[i])) goto failed; } @@ -326,19 +329,20 @@ static int __init eisa_probe(struct eisa_root_device *root) return -ENOMEM; } - if (eisa_init_device(root, edev, 0)) { + if (eisa_request_resources(root, edev, 0)) { + dev_warn(root->dev, + "EISA: Cannot allocate resource for mainboard\n"); kfree(edev); if (!root->force_probe) - return -ENODEV; + return -EBUSY; goto force_probe; } - if (eisa_request_resources(root, edev, 0)) { - dev_warn(root->dev, - "EISA: Cannot allocate resource for mainboard\n"); + if (eisa_init_device(root, edev, 0)) { + eisa_release_resources(edev); kfree(edev); if (!root->force_probe) - return -EBUSY; + return -ENODEV; goto force_probe; } @@ -361,11 +365,6 @@ static int __init eisa_probe(struct eisa_root_device *root) continue; } - if (eisa_init_device(root, edev, i)) { - kfree(edev); - continue; - } - if (eisa_request_resources(root, edev, i)) { dev_warn(root->dev, "Cannot allocate resource for EISA slot %d\n", @@ -374,6 +373,12 @@ static int __init eisa_probe(struct eisa_root_device *root) continue; } + if (eisa_init_device(root, edev, i)) { + eisa_release_resources(edev); + kfree(edev); + continue; + } + if (edev->state == (EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED)) enabled_str = " (forced enabled)"; else if (edev->state == EISA_CONFIG_FORCED) diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index 0d42ea79106..a333bf3517d 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -19,19 +19,40 @@ /* There is only *one* pci_eisa device per machine, right ? */ static struct eisa_root_device pci_eisa_root; -static int __init pci_eisa_init(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int __init pci_eisa_init(struct pci_dev *pdev) { - int rc; + int rc, i; + struct resource *res, *bus_res = NULL; if ((rc = pci_enable_device (pdev))) { dev_err(&pdev->dev, "Could not enable device\n"); return rc; } + /* + * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI + * device, so the resources available on EISA are the same as those + * available on the 82375 bus. This works the same as a PCI-PCI + * bridge in subtractive-decode mode (see pci_read_bridge_bases()). + * We assume other PCI-EISA bridges are similar. + * + * eisa_root_register() can only deal with a single io port resource, + * so we use the first valid io port resource. + */ + pci_bus_for_each_resource(pdev->bus, res, i) + if (res && (res->flags & IORESOURCE_IO)) { + bus_res = res; + break; + } + + if (!bus_res) { + dev_err(&pdev->dev, "No resources available\n"); + return -1; + } + pci_eisa_root.dev = &pdev->dev; - pci_eisa_root.res = pdev->bus->resource[0]; - pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start; + pci_eisa_root.res = bus_res; + pci_eisa_root.bus_base_addr = bus_res->start; pci_eisa_root.slots = EISA_MAX_SLOTS; pci_eisa_root.dma_mask = pdev->dma_mask; dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root); @@ -44,22 +65,26 @@ static int __init pci_eisa_init(struct pci_dev *pdev, return 0; } -static struct pci_device_id pci_eisa_pci_tbl[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 }, - { 0, } -}; +/* + * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init(). + * Otherwise pnp resource will get enabled early and could prevent eisa + * to be initialized. + * Also need to make sure pci_eisa_init_early() is called after + * x86/pci_subsys_init(). + * So need to use subsys_initcall_sync with it. + */ +static int __init pci_eisa_init_early(void) +{ + struct pci_dev *dev = NULL; + int ret; -static struct pci_driver __refdata pci_eisa_driver = { - .name = "pci_eisa", - .id_table = pci_eisa_pci_tbl, - .probe = pci_eisa_init, -}; + for_each_pci_dev(dev) + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) { + ret = pci_eisa_init(dev); + if (ret) + return ret; + } -static int __init pci_eisa_init_module (void) -{ - return pci_register_driver (&pci_eisa_driver); + return 0; } - -device_initcall(pci_eisa_init_module); -MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl); +subsys_initcall_sync(pci_eisa_init_early); |