diff options
Diffstat (limited to 'drivers/edac/edac_core.h')
| -rw-r--r-- | drivers/edac/edac_core.h | 350 |
1 files changed, 1 insertions, 349 deletions
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 55b8278bb17..fe90cd4a7eb 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -34,11 +34,10 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/workqueue.h> +#include <linux/edac.h> -#define EDAC_MC_LABEL_LEN 31 #define EDAC_DEVICE_NAME_LEN 31 #define EDAC_ATTRIB_VALUE_LEN 15 -#define MC_PROC_NAME_MAX_LEN 7 #if PAGE_SHIFT < 20 #define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT)) @@ -101,353 +100,6 @@ extern int edac_debug_level; #define edac_dev_name(dev) (dev)->dev_name -/* memory devices */ -enum dev_type { - DEV_UNKNOWN = 0, - DEV_X1, - DEV_X2, - DEV_X4, - DEV_X8, - DEV_X16, - DEV_X32, /* Do these parts exist? */ - DEV_X64 /* Do these parts exist? */ -}; - -#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN) -#define DEV_FLAG_X1 BIT(DEV_X1) -#define DEV_FLAG_X2 BIT(DEV_X2) -#define DEV_FLAG_X4 BIT(DEV_X4) -#define DEV_FLAG_X8 BIT(DEV_X8) -#define DEV_FLAG_X16 BIT(DEV_X16) -#define DEV_FLAG_X32 BIT(DEV_X32) -#define DEV_FLAG_X64 BIT(DEV_X64) - -/* memory types */ -enum mem_type { - MEM_EMPTY = 0, /* Empty csrow */ - MEM_RESERVED, /* Reserved csrow type */ - MEM_UNKNOWN, /* Unknown csrow type */ - MEM_FPM, /* Fast page mode */ - MEM_EDO, /* Extended data out */ - MEM_BEDO, /* Burst Extended data out */ - MEM_SDR, /* Single data rate SDRAM */ - MEM_RDR, /* Registered single data rate SDRAM */ - MEM_DDR, /* Double data rate SDRAM */ - MEM_RDDR, /* Registered Double data rate SDRAM */ - MEM_RMBS, /* Rambus DRAM */ - MEM_DDR2, /* DDR2 RAM */ - MEM_FB_DDR2, /* fully buffered DDR2 */ - MEM_RDDR2, /* Registered DDR2 RAM */ - MEM_XDR, /* Rambus XDR */ - MEM_DDR3, /* DDR3 RAM */ - MEM_RDDR3, /* Registered DDR3 RAM */ -}; - -#define MEM_FLAG_EMPTY BIT(MEM_EMPTY) -#define MEM_FLAG_RESERVED BIT(MEM_RESERVED) -#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN) -#define MEM_FLAG_FPM BIT(MEM_FPM) -#define MEM_FLAG_EDO BIT(MEM_EDO) -#define MEM_FLAG_BEDO BIT(MEM_BEDO) -#define MEM_FLAG_SDR BIT(MEM_SDR) -#define MEM_FLAG_RDR BIT(MEM_RDR) -#define MEM_FLAG_DDR BIT(MEM_DDR) -#define MEM_FLAG_RDDR BIT(MEM_RDDR) -#define MEM_FLAG_RMBS BIT(MEM_RMBS) -#define MEM_FLAG_DDR2 BIT(MEM_DDR2) -#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) -#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) -#define MEM_FLAG_XDR BIT(MEM_XDR) -#define MEM_FLAG_DDR3 BIT(MEM_DDR3) -#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) - -/* chipset Error Detection and Correction capabilities and mode */ -enum edac_type { - EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ - EDAC_NONE, /* Doesn't support ECC */ - EDAC_RESERVED, /* Reserved ECC type */ - EDAC_PARITY, /* Detects parity errors */ - EDAC_EC, /* Error Checking - no correction */ - EDAC_SECDED, /* Single bit error correction, Double detection */ - EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */ - EDAC_S4ECD4ED, /* Chipkill x4 devices */ - EDAC_S8ECD8ED, /* Chipkill x8 devices */ - EDAC_S16ECD16ED, /* Chipkill x16 devices */ -}; - -#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) -#define EDAC_FLAG_NONE BIT(EDAC_NONE) -#define EDAC_FLAG_PARITY BIT(EDAC_PARITY) -#define EDAC_FLAG_EC BIT(EDAC_EC) -#define EDAC_FLAG_SECDED BIT(EDAC_SECDED) -#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED) -#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED) -#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) -#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) - -/* scrubbing capabilities */ -enum scrub_type { - SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */ - SCRUB_NONE, /* No scrubber */ - SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */ - SCRUB_SW_SRC, /* Software scrub only errors */ - SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */ - SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */ - SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */ - SCRUB_HW_SRC, /* Hardware scrub only errors */ - SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */ - SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */ -}; - -#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) -#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC) -#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC) -#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE) -#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG) -#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC) -#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC) -#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE) - -/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */ - -/* EDAC internal operation states */ -#define OP_ALLOC 0x100 -#define OP_RUNNING_POLL 0x201 -#define OP_RUNNING_INTERRUPT 0x202 -#define OP_RUNNING_POLL_INTR 0x203 -#define OP_OFFLINE 0x300 - -/* - * There are several things to be aware of that aren't at all obvious: - * - * - * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. - * - * These are some of the many terms that are thrown about that don't always - * mean what people think they mean (Inconceivable!). In the interest of - * creating a common ground for discussion, terms and their definitions - * will be established. - * - * Memory devices: The individual chip on a memory stick. These devices - * commonly output 4 and 8 bits each. Grouping several - * of these in parallel provides 64 bits which is common - * for a memory stick. - * - * Memory Stick: A printed circuit board that aggregates multiple - * memory devices in parallel. This is the atomic - * memory component that is purchaseable by Joe consumer - * and loaded into a memory socket. - * - * Socket: A physical connector on the motherboard that accepts - * a single memory stick. - * - * Channel: Set of memory devices on a memory stick that must be - * grouped in parallel with one or more additional - * channels from other memory sticks. This parallel - * grouping of the output from multiple channels are - * necessary for the smallest granularity of memory access. - * Some memory controllers are capable of single channel - - * which means that memory sticks can be loaded - * individually. Other memory controllers are only - * capable of dual channel - which means that memory - * sticks must be loaded as pairs (see "socket set"). - * - * Chip-select row: All of the memory devices that are selected together. - * for a single, minimum grain of memory access. - * This selects all of the parallel memory devices across - * all of the parallel channels. Common chip-select rows - * for single channel are 64 bits, for dual channel 128 - * bits. - * - * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. - * Motherboards commonly drive two chip-select pins to - * a memory stick. A single-ranked stick, will occupy - * only one of those rows. The other will be unused. - * - * Double-Ranked stick: A double-ranked stick has two chip-select rows which - * access different sets of memory devices. The two - * rows cannot be accessed concurrently. - * - * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. - * A double-sided stick has two chip-select rows which - * access different sets of memory devices. The two - * rows cannot be accessed concurrently. "Double-sided" - * is irrespective of the memory devices being mounted - * on both sides of the memory stick. - * - * Socket set: All of the memory sticks that are required for - * a single memory access or all of the memory sticks - * spanned by a chip-select row. A single socket set - * has two chip-select rows and if double-sided sticks - * are used these will occupy those chip-select rows. - * - * Bank: This term is avoided because it is unclear when - * needing to distinguish between chip-select rows and - * socket sets. - * - * Controller pages: - * - * Physical pages: - * - * Virtual pages: - * - * - * STRUCTURE ORGANIZATION AND CHOICES - * - * - * - * PS - I enjoyed writing all that about as much as you enjoyed reading it. - */ - -struct channel_info { - int chan_idx; /* channel index */ - u32 ce_count; /* Correctable Errors for this CHANNEL */ - char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ - struct csrow_info *csrow; /* the parent */ -}; - -struct csrow_info { - unsigned long first_page; /* first page number in dimm */ - unsigned long last_page; /* last page number in dimm */ - unsigned long page_mask; /* used for interleaving - - * 0UL for non intlv - */ - u32 nr_pages; /* number of pages in csrow */ - u32 grain; /* granularity of reported error in bytes */ - int csrow_idx; /* the chip-select row */ - enum dev_type dtype; /* memory device type */ - u32 ue_count; /* Uncorrectable Errors for this csrow */ - u32 ce_count; /* Correctable Errors for this csrow */ - enum mem_type mtype; /* memory csrow type */ - enum edac_type edac_mode; /* EDAC mode for this csrow */ - struct mem_ctl_info *mci; /* the parent */ - - struct kobject kobj; /* sysfs kobject for this csrow */ - - /* channel information for this csrow */ - u32 nr_channels; - struct channel_info *channels; -}; - -struct mcidev_sysfs_group { - const char *name; /* group name */ - const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */ -}; - -struct mcidev_sysfs_group_kobj { - struct list_head list; /* list for all instances within a mc */ - - struct kobject kobj; /* kobj for the group */ - - const struct mcidev_sysfs_group *grp; /* group description table */ - struct mem_ctl_info *mci; /* the parent */ -}; - -/* mcidev_sysfs_attribute structure - * used for driver sysfs attributes and in mem_ctl_info - * sysfs top level entries - */ -struct mcidev_sysfs_attribute { - /* It should use either attr or grp */ - struct attribute attr; - const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */ - - /* Ops for show/store values at the attribute - not used on group */ - ssize_t (*show)(struct mem_ctl_info *,char *); - ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); -}; - -/* MEMORY controller information structure - */ -struct mem_ctl_info { - struct list_head link; /* for global list of mem_ctl_info structs */ - - struct module *owner; /* Module owner of this control struct */ - - unsigned long mtype_cap; /* memory types supported by mc */ - unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */ - unsigned long edac_cap; /* configuration capabilities - this is - * closely related to edac_ctl_cap. The - * difference is that the controller may be - * capable of s4ecd4ed which would be listed - * in edac_ctl_cap, but if channels aren't - * capable of s4ecd4ed then the edac_cap would - * not have that capability. - */ - unsigned long scrub_cap; /* chipset scrub capabilities */ - enum scrub_type scrub_mode; /* current scrub mode */ - - /* Translates sdram memory scrub rate given in bytes/sec to the - internal representation and configures whatever else needs - to be configured. - */ - int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw); - - /* Get the current sdram memory scrub rate from the internal - representation and converts it to the closest matching - bandwidth in bytes/sec. - */ - int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci); - - - /* pointer to edac checking routine */ - void (*edac_check) (struct mem_ctl_info * mci); - - /* - * Remaps memory pages: controller pages to physical pages. - * For most MC's, this will be NULL. - */ - /* FIXME - why not send the phys page to begin with? */ - unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, - unsigned long page); - int mc_idx; - int nr_csrows; - struct csrow_info *csrows; - /* - * FIXME - what about controllers on other busses? - IDs must be - * unique. dev pointer should be sufficiently unique, but - * BUS:SLOT.FUNC numbers may not be unique. - */ - struct device *dev; - const char *mod_name; - const char *mod_ver; - const char *ctl_name; - const char *dev_name; - char proc_name[MC_PROC_NAME_MAX_LEN + 1]; - void *pvt_info; - u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */ - u32 ce_noinfo_count; /* Correctable Errors w/o info */ - u32 ue_count; /* Total Uncorrectable Errors for this MC */ - u32 ce_count; /* Total Correctable Errors for this MC */ - unsigned long start_time; /* mci load start time (in jiffies) */ - - struct completion complete; - - /* edac sysfs device control */ - struct kobject edac_mci_kobj; - - /* list for all grp instances within a mc */ - struct list_head grp_kobj_list; - - /* Additional top controller level attributes, but specified - * by the low level driver. - * - * Set by the low level driver to provide attributes at the - * controller level, same level as 'ue_count' and 'ce_count' above. - * An array of structures, NULL terminated - * - * If attributes are desired, then set to array of attributes - * If no attributes are desired, leave NULL - */ - const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes; - - /* work struct for this MC */ - struct delayed_work work; - - /* the internal state of this controller instance */ - int op_state; -}; - /* * The following are the structures to provide for a generic * or abstract 'edac_device'. This set of structures and the |