1 files changed, 211 insertions, 161 deletions

diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
index a9518d3e4be..3cda79bc8b0 100644
--- a/drivers/edac/e7xxx_edac.c
+++ b/drivers/edac/e7xxx_edac.c
@@ -10,6 +10,9 @@
  * Based on work by Dan Hollis <goemon at anime dot net> and others.
  *	http://www.anime.net/~goemon/linux-ecc/
  *
+ * Datasheet:
+ *	http://www.intel.com/content/www/us/en/chipsets/e7501-chipset-memory-controller-hub-datasheet.html
+ *
  * Contributors:
  *	Eric Biederman (Linux Networx)
  *	Tom Zimmerman (Linux Networx)
@@ -22,13 +25,15 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
-#include <linux/slab.h>
-#include "edac_mc.h"
+#include <linux/edac.h>
+#include "edac_core.h"
+
+#define	E7XXX_REVISION " Ver: 2.0.2"
+#define	EDAC_MOD_STR	"e7xxx_edac"
 
 #define e7xxx_printk(level, fmt, arg...) \
 	edac_printk(level, "e7xxx", fmt, ##arg)
@@ -69,7 +74,7 @@
 #endif				/* PCI_DEVICE_ID_INTEL_7505_1_ERR */
 
 #define E7XXX_NR_CSROWS		8	/* number of csrows */
-#define E7XXX_NR_DIMMS		8	/* FIXME - is this correct? */
+#define E7XXX_NR_DIMMS		8	/* 2 channels, 4 dimms/channel */
 
 /* E7XXX register addresses - device 0 function 0 */
 #define E7XXX_DRB		0x60	/* DRAM row boundary register (8b) */
@@ -141,29 +146,27 @@ struct e7xxx_error_info {
 	u32 dram_uelog_add;
 };
 
+static struct edac_pci_ctl_info *e7xxx_pci;
+
 static const struct e7xxx_dev_info e7xxx_devs[] = {
 	[E7500] = {
 		.err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR,
-		.ctl_name = "E7500"
-	},
+		.ctl_name = "E7500"},
 	[E7501] = {
 		.err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR,
-		.ctl_name = "E7501"
-	},
+		.ctl_name = "E7501"},
 	[E7505] = {
 		.err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR,
-		.ctl_name = "E7505"
-	},
+		.ctl_name = "E7505"},
 	[E7205] = {
 		.err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR,
-		.ctl_name = "E7205"
-	},
+		.ctl_name = "E7205"},
 };
 
 /* FIXME - is this valid for both SECDED and S4ECD4ED? */
 static inline int e7xxx_find_channel(u16 syndrome)
 {
-	debugf3("%s()\n", __func__);
+	edac_dbg(3, "\n");
 
 	if ((syndrome & 0xff00) == 0)
 		return 0;
@@ -178,15 +181,15 @@ static inline int e7xxx_find_channel(u16 syndrome)
 }
 
 static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
-		unsigned long page)
+				unsigned long page)
 {
 	u32 remap;
-	struct e7xxx_pvt *pvt = (struct e7xxx_pvt *) mci->pvt_info;
+	struct e7xxx_pvt *pvt = (struct e7xxx_pvt *)mci->pvt_info;
 
-	debugf3("%s()\n", __func__);
+	edac_dbg(3, "\n");
 
 	if ((page < pvt->tolm) ||
-			((page >= 0x100000) && (page < pvt->remapbase)))
+		((page >= 0x100000) && (page < pvt->remapbase)))
 		return page;
 
 	remap = (page - pvt->tolm) + pvt->remapbase;
@@ -198,65 +201,67 @@ static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
 	return pvt->tolm - 1;
 }
 
-static void process_ce(struct mem_ctl_info *mci,
-		struct e7xxx_error_info *info)
+static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
 {
 	u32 error_1b, page;
 	u16 syndrome;
 	int row;
 	int channel;
 
-	debugf3("%s()\n", __func__);
+	edac_dbg(3, "\n");
 	/* read the error address */
 	error_1b = info->dram_celog_add;
 	/* FIXME - should use PAGE_SHIFT */
-	page = error_1b >> 6;  /* convert the address to 4k page */
+	page = error_1b >> 6;	/* convert the address to 4k page */
 	/* read the syndrome */
 	syndrome = info->dram_celog_syndrome;
 	/* FIXME - check for -1 */
 	row = edac_mc_find_csrow_by_page(mci, page);
 	/* convert syndrome to channel */
 	channel = e7xxx_find_channel(syndrome);
-	edac_mc_handle_ce(mci, page, 0, syndrome, row, channel, "e7xxx CE");
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, page, 0, syndrome,
+			     row, channel, -1, "e7xxx CE", "");
 }
 
 static void process_ce_no_info(struct mem_ctl_info *mci)
 {
-	debugf3("%s()\n", __func__);
-	edac_mc_handle_ce_no_info(mci, "e7xxx CE log register overflow");
+	edac_dbg(3, "\n");
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+			     "e7xxx CE log register overflow", "");
 }
 
-static void process_ue(struct mem_ctl_info *mci,
-		struct e7xxx_error_info *info)
+static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
 {
 	u32 error_2b, block_page;
 	int row;
 
-	debugf3("%s()\n", __func__);
+	edac_dbg(3, "\n");
 	/* read the error address */
 	error_2b = info->dram_uelog_add;
 	/* FIXME - should use PAGE_SHIFT */
-	block_page = error_2b >> 6;  /* convert to 4k address */
+	block_page = error_2b >> 6;	/* convert to 4k address */
 	row = edac_mc_find_csrow_by_page(mci, block_page);
-	edac_mc_handle_ue(mci, block_page, 0, row, "e7xxx UE");
+
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, block_page, 0, 0,
+			     row, -1, -1, "e7xxx UE", "");
 }
 
 static void process_ue_no_info(struct mem_ctl_info *mci)
 {
-	debugf3("%s()\n", __func__);
-	edac_mc_handle_ue_no_info(mci, "e7xxx UE log register overflow");
+	edac_dbg(3, "\n");
+
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+			     "e7xxx UE log register overflow", "");
 }
 
-static void e7xxx_get_error_info (struct mem_ctl_info *mci,
-		struct e7xxx_error_info *info)
+static void e7xxx_get_error_info(struct mem_ctl_info *mci,
+				 struct e7xxx_error_info *info)
 {
 	struct e7xxx_pvt *pvt;
 
-	pvt = (struct e7xxx_pvt *) mci->pvt_info;
-	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR,
-			&info->dram_ferr);
-	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR,
-			&info->dram_nerr);
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
+	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR, &info->dram_ferr);
+	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR, &info->dram_nerr);
 
 	if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) {
 		pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD,
@@ -277,8 +282,9 @@ static void e7xxx_get_error_info (struct mem_ctl_info *mci,
 		pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03);
 }
 
-static int e7xxx_process_error_info (struct mem_ctl_info *mci,
-		struct e7xxx_error_info *info, int handle_errors)
+static int e7xxx_process_error_info(struct mem_ctl_info *mci,
+				struct e7xxx_error_info *info,
+				int handle_errors)
 {
 	int error_found;
 
@@ -328,131 +334,159 @@ static void e7xxx_check(struct mem_ctl_info *mci)
 {
 	struct e7xxx_error_info info;
 
-	debugf3("%s()\n", __func__);
+	edac_dbg(3, "\n");
 	e7xxx_get_error_info(mci, &info);
 	e7xxx_process_error_info(mci, &info, 1);
 }
 
-static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u32 drc, int dev_idx)
 {
-	int rc = -ENODEV;
-	int index;
-	u16 pci_data;
-	struct mem_ctl_info *mci = NULL;
-	struct e7xxx_pvt *pvt = NULL;
-	u32 drc;
-	int drc_chan = 1;	/* Number of channels 0=1chan,1=2chan */
-	int drc_drbg = 1;	/* DRB granularity 0=32mb,1=64mb */
-	int drc_ddim;		/* DRAM Data Integrity Mode 0=none,2=edac */
-	u32 dra;
-	unsigned long last_cumul_size;
-	struct e7xxx_error_info discard;
-
-	debugf0("%s(): mci\n", __func__);
-
-	/* need to find out the number of channels */
-	pci_read_config_dword(pdev, E7XXX_DRC, &drc);
+	return (dev_idx == E7501) ? ((drc >> 22) & 0x1) : 1;
+}
 
+/* Return DRB granularity (0=32mb, 1=64mb). */
+static inline int drb_granularity(u32 drc, int dev_idx)
+{
 	/* only e7501 can be single channel */
-	if (dev_idx == E7501) {
-		drc_chan = ((drc >> 22) & 0x1);
-		drc_drbg = (drc >> 18) & 0x3;
-	}
-
-	drc_ddim = (drc >> 20) & 0x3;
-	mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
-
-	if (mci == NULL) {
-		rc = -ENOMEM;
-		goto fail;
-	}
-
-	debugf3("%s(): init mci\n", __func__);
-	mci->mtype_cap = MEM_FLAG_RDDR;
-	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
-			EDAC_FLAG_S4ECD4ED;
-	/* FIXME - what if different memory types are in different csrows? */
-	mci->mod_name = EDAC_MOD_STR;
-	mci->mod_ver = "$Revision: 1.5.2.9 $";
-	mci->pdev = pdev;
-
-	debugf3("%s(): init pvt\n", __func__);
-	pvt = (struct e7xxx_pvt *) mci->pvt_info;
-	pvt->dev_info = &e7xxx_devs[dev_idx];
-	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
-					pvt->dev_info->err_dev,
-					pvt->bridge_ck);
-
-	if (!pvt->bridge_ck) {
-		e7xxx_printk(KERN_ERR, "error reporting device not found:"
-			"vendor %x device 0x%x (broken BIOS?)\n",
-			PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
-		goto fail;
-	}
+	return (dev_idx == E7501) ? ((drc >> 18) & 0x3) : 1;
+}
 
-	debugf3("%s(): more mci init\n", __func__);
-	mci->ctl_name = pvt->dev_info->ctl_name;
-	mci->edac_check = e7xxx_check;
-	mci->ctl_page_to_phys = ctl_page_to_phys;
+static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+			int dev_idx, u32 drc)
+{
+	unsigned long last_cumul_size;
+	int index, j;
+	u8 value;
+	u32 dra, cumul_size, nr_pages;
+	int drc_chan, drc_drbg, drc_ddim, mem_dev;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	enum edac_type edac_mode;
 
-	/* find out the device types */
 	pci_read_config_dword(pdev, E7XXX_DRA, &dra);
+	drc_chan = dual_channel_active(drc, dev_idx);
+	drc_drbg = drb_granularity(drc, dev_idx);
+	drc_ddim = (drc >> 20) & 0x3;
+	last_cumul_size = 0;
 
-	/*
-	 * The dram row boundary (DRB) reg values are boundary address
+	/* The dram row boundary (DRB) reg values are boundary address
 	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
 	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
 	 * contain the total memory contained in all eight rows.
 	 */
-	for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
-		u8 value;
-		u32 cumul_size;
+	for (index = 0; index < mci->nr_csrows; index++) {
 		/* mem_dev 0=x8, 1=x4 */
-		int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
-		struct csrow_info *csrow = &mci->csrows[index];
+		mem_dev = (dra >> (index * 4 + 3)) & 0x1;
+		csrow = mci->csrows[index];
 
-		pci_read_config_byte(mci->pdev, E7XXX_DRB + index, &value);
+		pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
 		/* convert a 64 or 32 MiB DRB to a page size. */
 		cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
-		debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
-			cumul_size);
-
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
 		if (cumul_size == last_cumul_size)
-			continue;  /* not populated */
+			continue;	/* not populated */
 
 		csrow->first_page = last_cumul_size;
 		csrow->last_page = cumul_size - 1;
-		csrow->nr_pages = cumul_size - last_cumul_size;
+		nr_pages = cumul_size - last_cumul_size;
 		last_cumul_size = cumul_size;
-		csrow->grain = 1 << 12;  /* 4KiB - resolution of CELOG */
-		csrow->mtype = MEM_RDDR;  /* only one type supported */
-		csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
 
 		/*
-		 * if single channel or x8 devices then SECDED
-		 * if dual channel and x4 then S4ECD4ED
-		 */
+		* if single channel or x8 devices then SECDED
+		* if dual channel and x4 then S4ECD4ED
+		*/
 		if (drc_ddim) {
 			if (drc_chan && mem_dev) {
-				csrow->edac_mode = EDAC_S4ECD4ED;
+				edac_mode = EDAC_S4ECD4ED;
 				mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
 			} else {
-				csrow->edac_mode = EDAC_SECDED;
+				edac_mode = EDAC_SECDED;
 				mci->edac_cap |= EDAC_FLAG_SECDED;
 			}
 		} else
-			csrow->edac_mode = EDAC_NONE;
+			edac_mode = EDAC_NONE;
+
+		for (j = 0; j < drc_chan + 1; j++) {
+			dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / (drc_chan + 1);
+			dimm->grain = 1 << 12;	/* 4KiB - resolution of CELOG */
+			dimm->mtype = MEM_RDDR;	/* only one type supported */
+			dimm->dtype = mem_dev ? DEV_X4 : DEV_X8;
+			dimm->edac_mode = edac_mode;
+		}
 	}
+}
 
-	mci->edac_cap |= EDAC_FLAG_NONE;
+static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	u16 pci_data;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	struct e7xxx_pvt *pvt = NULL;
+	u32 drc;
+	int drc_chan;
+	struct e7xxx_error_info discard;
+
+	edac_dbg(0, "mci\n");
+
+	pci_read_config_dword(pdev, E7XXX_DRC, &drc);
+
+	drc_chan = dual_channel_active(drc, dev_idx);
+	/*
+	 * According with the datasheet, this device has a maximum of
+	 * 4 DIMMS per channel, either single-rank or dual-rank. So, the
+	 * total amount of dimms is 8 (E7XXX_NR_DIMMS).
+	 * That means that the DIMM is mapped as CSROWs, and the channel
+	 * will map the rank. So, an error to either channel should be
+	 * attributed to the same dimm.
+	 */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = E7XXX_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = drc_chan + 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(3, "init mci\n");
+	mci->mtype_cap = MEM_FLAG_RDDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
+		EDAC_FLAG_S4ECD4ED;
+	/* FIXME - what if different memory types are in different csrows? */
+	mci->mod_name = EDAC_MOD_STR;
+	mci->mod_ver = E7XXX_REVISION;
+	mci->pdev = &pdev->dev;
+	edac_dbg(3, "init pvt\n");
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
+	pvt->dev_info = &e7xxx_devs[dev_idx];
+	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+					pvt->dev_info->err_dev, pvt->bridge_ck);
 
-	debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
+	if (!pvt->bridge_ck) {
+		e7xxx_printk(KERN_ERR, "error reporting device not found:"
+			"vendor %x device 0x%x (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
+		goto fail0;
+	}
+
+	edac_dbg(3, "more mci init\n");
+	mci->ctl_name = pvt->dev_info->ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = e7xxx_check;
+	mci->ctl_page_to_phys = ctl_page_to_phys;
+	e7xxx_init_csrows(mci, pdev, dev_idx, drc);
+	mci->edac_cap |= EDAC_FLAG_NONE;
+	edac_dbg(3, "tolm, remapbase, remaplimit\n");
 	/* load the top of low memory, remap base, and remap limit vars */
-	pci_read_config_word(mci->pdev, E7XXX_TOLM, &pci_data);
+	pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
 	pvt->tolm = ((u32) pci_data) << 4;
-	pci_read_config_word(mci->pdev, E7XXX_REMAPBASE, &pci_data);
+	pci_read_config_word(pdev, E7XXX_REMAPBASE, &pci_data);
 	pvt->remapbase = ((u32) pci_data) << 14;
-	pci_read_config_word(mci->pdev, E7XXX_REMAPLIMIT, &pci_data);
+	pci_read_config_word(pdev, E7XXX_REMAPLIMIT, &pci_data);
 	pvt->remaplimit = ((u32) pci_data) << 14;
 	e7xxx_printk(KERN_INFO,
 		"tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
@@ -461,71 +495,82 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
 	/* clear any pending errors, or initial state bits */
 	e7xxx_get_error_info(mci, &discard);
 
-	if (edac_mc_add_mc(mci) != 0) {
-		debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
-		goto fail;
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail1;
+	}
+
+	/* allocating generic PCI control info */
+	e7xxx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!e7xxx_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
 	}
 
 	/* get this far and it's successful */
-	debugf3("%s(): success\n", __func__);
+	edac_dbg(3, "success\n");
 	return 0;
 
-fail:
-	if (mci != NULL) {
-		if(pvt != NULL && pvt->bridge_ck)
-			pci_dev_put(pvt->bridge_ck);
-		edac_mc_free(mci);
-	}
+fail1:
+	pci_dev_put(pvt->bridge_ck);
+
+fail0:
+	edac_mc_free(mci);
 
-	return rc;
+	return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
-static int __devinit e7xxx_init_one(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
+static int e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	debugf0("%s()\n", __func__);
+	edac_dbg(0, "\n");
 
 	/* wake up and enable device */
 	return pci_enable_device(pdev) ?
 		-EIO : e7xxx_probe1(pdev, ent->driver_data);
 }
 
-static void __devexit e7xxx_remove_one(struct pci_dev *pdev)
+static void e7xxx_remove_one(struct pci_dev *pdev)
 {
 	struct mem_ctl_info *mci;
 	struct e7xxx_pvt *pvt;
 
-	debugf0("%s()\n", __func__);
+	edac_dbg(0, "\n");
 
-	if ((mci = edac_mc_del_mc(pdev)) == NULL)
+	if (e7xxx_pci)
+		edac_pci_release_generic_ctl(e7xxx_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
 		return;
 
-	pvt = (struct e7xxx_pvt *) mci->pvt_info;
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
 	pci_dev_put(pvt->bridge_ck);
 	edac_mc_free(mci);
 }
 
-static const struct pci_device_id e7xxx_pci_tbl[] __devinitdata = {
+static const struct pci_device_id e7xxx_pci_tbl[] = {
 	{
-		PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		E7205
-	},
+	 PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7205},
 	{
-		PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		E7500
-	},
+	 PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7500},
 	{
-		PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		E7501
-	},
+	 PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7501},
 	{
-		PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		E7505
-	},
+	 PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7505},
 	{
-		0,
-	}	/* 0 terminated list. */
+	 0,
+	 }			/* 0 terminated list. */
 };
 
 MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
@@ -533,12 +578,15 @@ MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
 static struct pci_driver e7xxx_driver = {
 	.name = EDAC_MOD_STR,
 	.probe = e7xxx_init_one,
-	.remove = __devexit_p(e7xxx_remove_one),
+	.remove = e7xxx_remove_one,
 	.id_table = e7xxx_pci_tbl,
 };
 
 static int __init e7xxx_init(void)
 {
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
 	return pci_register_driver(&e7xxx_driver);
 }
 
@@ -552,5 +600,7 @@ module_exit(e7xxx_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n"
-	"Based on.work by Dan Hollis et al");
+		"Based on.work by Dan Hollis et al");
 MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");