diff options
Diffstat (limited to 'drivers/edac/e7xxx_edac.c')
| -rw-r--r-- | drivers/edac/e7xxx_edac.c | 118 |
1 files changed, 74 insertions, 44 deletions
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c index 6ffb6d23281..3cda79bc8b0 100644 --- a/drivers/edac/e7xxx_edac.c +++ b/drivers/edac/e7xxx_edac.c @@ -10,6 +10,9 @@ * Based on work by Dan Hollis <goemon at anime dot net> and others. * http://www.anime.net/~goemon/linux-ecc/ * + * Datasheet: + * http://www.intel.com/content/www/us/en/chipsets/e7501-chipset-memory-controller-hub-datasheet.html + * * Contributors: * Eric Biederman (Linux Networx) * Tom Zimmerman (Linux Networx) @@ -71,7 +74,7 @@ #endif /* PCI_DEVICE_ID_INTEL_7505_1_ERR */ #define E7XXX_NR_CSROWS 8 /* number of csrows */ -#define E7XXX_NR_DIMMS 8 /* FIXME - is this correct? */ +#define E7XXX_NR_DIMMS 8 /* 2 channels, 4 dimms/channel */ /* E7XXX register addresses - device 0 function 0 */ #define E7XXX_DRB 0x60 /* DRAM row boundary register (8b) */ @@ -163,7 +166,7 @@ static const struct e7xxx_dev_info e7xxx_devs[] = { /* FIXME - is this valid for both SECDED and S4ECD4ED? */ static inline int e7xxx_find_channel(u16 syndrome) { - debugf3("%s()\n", __func__); + edac_dbg(3, "\n"); if ((syndrome & 0xff00) == 0) return 0; @@ -183,7 +186,7 @@ static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci, u32 remap; struct e7xxx_pvt *pvt = (struct e7xxx_pvt *)mci->pvt_info; - debugf3("%s()\n", __func__); + edac_dbg(3, "\n"); if ((page < pvt->tolm) || ((page >= 0x100000) && (page < pvt->remapbase))) @@ -205,7 +208,7 @@ static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info) int row; int channel; - debugf3("%s()\n", __func__); + edac_dbg(3, "\n"); /* read the error address */ error_1b = info->dram_celog_add; /* FIXME - should use PAGE_SHIFT */ @@ -216,13 +219,15 @@ static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info) row = edac_mc_find_csrow_by_page(mci, page); /* convert syndrome to channel */ channel = e7xxx_find_channel(syndrome); - edac_mc_handle_ce(mci, page, 0, syndrome, row, channel, "e7xxx CE"); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, page, 0, syndrome, + row, channel, -1, "e7xxx CE", ""); } static void process_ce_no_info(struct mem_ctl_info *mci) { - debugf3("%s()\n", __func__); - edac_mc_handle_ce_no_info(mci, "e7xxx CE log register overflow"); + edac_dbg(3, "\n"); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1, + "e7xxx CE log register overflow", ""); } static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info) @@ -230,19 +235,23 @@ static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info) u32 error_2b, block_page; int row; - debugf3("%s()\n", __func__); + edac_dbg(3, "\n"); /* read the error address */ error_2b = info->dram_uelog_add; /* FIXME - should use PAGE_SHIFT */ block_page = error_2b >> 6; /* convert to 4k address */ row = edac_mc_find_csrow_by_page(mci, block_page); - edac_mc_handle_ue(mci, block_page, 0, row, "e7xxx UE"); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, block_page, 0, 0, + row, -1, -1, "e7xxx UE", ""); } static void process_ue_no_info(struct mem_ctl_info *mci) { - debugf3("%s()\n", __func__); - edac_mc_handle_ue_no_info(mci, "e7xxx UE log register overflow"); + edac_dbg(3, "\n"); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1, + "e7xxx UE log register overflow", ""); } static void e7xxx_get_error_info(struct mem_ctl_info *mci, @@ -325,7 +334,7 @@ static void e7xxx_check(struct mem_ctl_info *mci) { struct e7xxx_error_info info; - debugf3("%s()\n", __func__); + edac_dbg(3, "\n"); e7xxx_get_error_info(mci, &info); e7xxx_process_error_info(mci, &info, 1); } @@ -347,11 +356,13 @@ static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, int dev_idx, u32 drc) { unsigned long last_cumul_size; - int index; + int index, j; u8 value; - u32 dra, cumul_size; + u32 dra, cumul_size, nr_pages; int drc_chan, drc_drbg, drc_ddim, mem_dev; struct csrow_info *csrow; + struct dimm_info *dimm; + enum edac_type edac_mode; pci_read_config_dword(pdev, E7XXX_DRA, &dra); drc_chan = dual_channel_active(drc, dev_idx); @@ -367,38 +378,44 @@ static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, for (index = 0; index < mci->nr_csrows; index++) { /* mem_dev 0=x8, 1=x4 */ mem_dev = (dra >> (index * 4 + 3)) & 0x1; - csrow = &mci->csrows[index]; + csrow = mci->csrows[index]; pci_read_config_byte(pdev, E7XXX_DRB + index, &value); /* convert a 64 or 32 MiB DRB to a page size. */ cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); - debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, - cumul_size); + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); if (cumul_size == last_cumul_size) continue; /* not populated */ csrow->first_page = last_cumul_size; csrow->last_page = cumul_size - 1; - csrow->nr_pages = cumul_size - last_cumul_size; + nr_pages = cumul_size - last_cumul_size; last_cumul_size = cumul_size; - csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */ - csrow->mtype = MEM_RDDR; /* only one type supported */ - csrow->dtype = mem_dev ? DEV_X4 : DEV_X8; /* - * if single channel or x8 devices then SECDED - * if dual channel and x4 then S4ECD4ED - */ + * if single channel or x8 devices then SECDED + * if dual channel and x4 then S4ECD4ED + */ if (drc_ddim) { if (drc_chan && mem_dev) { - csrow->edac_mode = EDAC_S4ECD4ED; + edac_mode = EDAC_S4ECD4ED; mci->edac_cap |= EDAC_FLAG_S4ECD4ED; } else { - csrow->edac_mode = EDAC_SECDED; + edac_mode = EDAC_SECDED; mci->edac_cap |= EDAC_FLAG_SECDED; } } else - csrow->edac_mode = EDAC_NONE; + edac_mode = EDAC_NONE; + + for (j = 0; j < drc_chan + 1; j++) { + dimm = csrow->channels[j]->dimm; + + dimm->nr_pages = nr_pages / (drc_chan + 1); + dimm->grain = 1 << 12; /* 4KiB - resolution of CELOG */ + dimm->mtype = MEM_RDDR; /* only one type supported */ + dimm->dtype = mem_dev ? DEV_X4 : DEV_X8; + dimm->edac_mode = edac_mode; + } } } @@ -406,30 +423,44 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) { u16 pci_data; struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; struct e7xxx_pvt *pvt = NULL; u32 drc; int drc_chan; struct e7xxx_error_info discard; - debugf0("%s(): mci\n", __func__); + edac_dbg(0, "mci\n"); pci_read_config_dword(pdev, E7XXX_DRC, &drc); drc_chan = dual_channel_active(drc, dev_idx); - mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1, 0); - + /* + * According with the datasheet, this device has a maximum of + * 4 DIMMS per channel, either single-rank or dual-rank. So, the + * total amount of dimms is 8 (E7XXX_NR_DIMMS). + * That means that the DIMM is mapped as CSROWs, and the channel + * will map the rank. So, an error to either channel should be + * attributed to the same dimm. + */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = E7XXX_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = drc_chan + 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); if (mci == NULL) return -ENOMEM; - debugf3("%s(): init mci\n", __func__); + edac_dbg(3, "init mci\n"); mci->mtype_cap = MEM_FLAG_RDDR; mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED; /* FIXME - what if different memory types are in different csrows? */ mci->mod_name = EDAC_MOD_STR; mci->mod_ver = E7XXX_REVISION; - mci->dev = &pdev->dev; - debugf3("%s(): init pvt\n", __func__); + mci->pdev = &pdev->dev; + edac_dbg(3, "init pvt\n"); pvt = (struct e7xxx_pvt *)mci->pvt_info; pvt->dev_info = &e7xxx_devs[dev_idx]; pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL, @@ -442,14 +473,14 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) goto fail0; } - debugf3("%s(): more mci init\n", __func__); + edac_dbg(3, "more mci init\n"); mci->ctl_name = pvt->dev_info->ctl_name; mci->dev_name = pci_name(pdev); mci->edac_check = e7xxx_check; mci->ctl_page_to_phys = ctl_page_to_phys; e7xxx_init_csrows(mci, pdev, dev_idx, drc); mci->edac_cap |= EDAC_FLAG_NONE; - debugf3("%s(): tolm, remapbase, remaplimit\n", __func__); + edac_dbg(3, "tolm, remapbase, remaplimit\n"); /* load the top of low memory, remap base, and remap limit vars */ pci_read_config_word(pdev, E7XXX_TOLM, &pci_data); pvt->tolm = ((u32) pci_data) << 4; @@ -468,7 +499,7 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) * type of memory controller. The ID is therefore hardcoded to 0. */ if (edac_mc_add_mc(mci)) { - debugf3("%s(): failed edac_mc_add_mc()\n", __func__); + edac_dbg(3, "failed edac_mc_add_mc()\n"); goto fail1; } @@ -484,7 +515,7 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) } /* get this far and it's successful */ - debugf3("%s(): success\n", __func__); + edac_dbg(3, "success\n"); return 0; fail1: @@ -497,22 +528,21 @@ fail0: } /* returns count (>= 0), or negative on error */ -static int __devinit e7xxx_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - debugf0("%s()\n", __func__); + edac_dbg(0, "\n"); /* wake up and enable device */ return pci_enable_device(pdev) ? -EIO : e7xxx_probe1(pdev, ent->driver_data); } -static void __devexit e7xxx_remove_one(struct pci_dev *pdev) +static void e7xxx_remove_one(struct pci_dev *pdev) { struct mem_ctl_info *mci; struct e7xxx_pvt *pvt; - debugf0("%s()\n", __func__); + edac_dbg(0, "\n"); if (e7xxx_pci) edac_pci_release_generic_ctl(e7xxx_pci); @@ -525,7 +555,7 @@ static void __devexit e7xxx_remove_one(struct pci_dev *pdev) edac_mc_free(mci); } -static const struct pci_device_id e7xxx_pci_tbl[] __devinitdata = { +static const struct pci_device_id e7xxx_pci_tbl[] = { { PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, E7205}, @@ -548,7 +578,7 @@ MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl); static struct pci_driver e7xxx_driver = { .name = EDAC_MOD_STR, .probe = e7xxx_init_one, - .remove = __devexit_p(e7xxx_remove_one), + .remove = e7xxx_remove_one, .id_table = e7xxx_pci_tbl, }; |
