diff options
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
| -rw-r--r-- | drivers/dma/amba-pl08x.c | 1492 |
1 files changed, 858 insertions, 634 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8a281584458..8114731a1c6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -24,6 +24,7 @@ * * Documentation: ARM DDI 0196G == PL080 * Documentation: ARM DDI 0218E == PL081 + * Documentation: S3C6410 User's Manual == PL080S * * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any * channel. @@ -36,6 +37,14 @@ * * The PL080 has a dual bus master, PL081 has a single master. * + * PL080S is a version modified by Samsung and used in S3C64xx SoCs. + * It differs in following aspects: + * - CH_CONFIG register at different offset, + * - separate CH_CONTROL2 register for transfer size, + * - bigger maximum transfer size, + * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word, + * - no support for peripheral flow control. + * * Memory to peripheral transfer may be visualized as * Get data from memory to DMAC * Until no data left @@ -64,10 +73,7 @@ * - Peripheral flow control: the transfer size is ignored (and should be * zero). The data is transferred from the current LLI entry, until * after the final transfer signalled by LBREQ or LSREQ. The DMAC - * will then move to the next LLI entry. - * - * Global TODO: - * - Break out common code from arch/arm/mach-s3c64xx and share + * will then move to the next LLI entry. Unsupported by PL080S. */ #include <linux/amba/bus.h> #include <linux/amba/pl08x.h> @@ -77,39 +83,162 @@ #include <linux/dmaengine.h> #include <linux/dmapool.h> #include <linux/dma-mapping.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/seq_file.h> #include <linux/slab.h> -#include <asm/hardware/pl080.h> +#include <linux/amba/pl080.h> + +#include "dmaengine.h" +#include "virt-dma.h" #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; +struct pl08x_driver_data; /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives * @channels: the number of channels available in this variant * @dualmaster: whether this version supports dual AHB masters or not. + * @nomadik: whether the channels have Nomadik security extension bits + * that need to be checked for permission before use and some registers are + * missing + * @pl080s: whether this version is a PL080S, which has separate register and + * LLI word for transfer size. */ struct vendor_data { + u8 config_offset; u8 channels; bool dualmaster; + bool nomadik; + bool pl080s; + u32 max_transfer_size; }; -/* - * PL08X private data structures - * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info is in cctl. Also note that these - * are fixed 32-bit quantities. +/** + * struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; +}; + +#define IS_BUS_ALIGNED(bus) IS_ALIGNED((bus)->addr, (bus)->buswidth) + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @serving: the virtual channel currently being served by this physical + * channel + * @locked: channel unavailable for the system, e.g. dedicated to secure + * world + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + void __iomem *reg_config; + spinlock_t lock; + struct pl08x_dma_chan *serving; + bool locked; +}; + +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list */ -struct pl08x_lli { - u32 src; - u32 dst; - u32 lli; +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @vd: virtual DMA descriptor + * @dsg_list: list of children sg's + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd + * @done: this marks completed descriptors, which should not have their + * mux released. + * @cyclic: indicate cyclic transfers + */ +struct pl08x_txd { + struct virt_dma_desc vd; + struct list_head dsg_list; + dma_addr_t llis_bus; + u32 *llis_va; + /* Default cctl value for LLIs */ u32 cctl; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; + bool done; + bool cyclic; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @vc: wrappped virtual channel + * @phychan: the physical channel utilized by this channel, if there is one + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @signal: the physical DMA request signal which this channel is using + * @mux_use: count of descriptors using this DMA request signal setting + */ +struct pl08x_dma_chan { + struct virt_dma_chan vc; + struct pl08x_phy_chan *phychan; + const char *name; + const struct pl08x_channel_data *cd; + struct dma_slave_config cfg; + struct pl08x_txd *at; + struct pl08x_driver_data *host; + enum pl08x_dma_chan_state state; + bool slave; + int signal; + unsigned mux_use; }; /** @@ -122,7 +251,6 @@ struct pl08x_lli { * @pd: platform data passed in from the platform/machine * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors - * @pool_ctr: counter of LLIs in the pool * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI * fetches * @mem_buses: set to indicate memory transfers on AHB2. @@ -137,31 +265,80 @@ struct pl08x_driver_data { struct pl08x_platform_data *pd; struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; - int pool_ctr; u8 lli_buses; u8 mem_buses; - spinlock_t lock; + u8 lli_words; }; /* * PL08X specific defines */ -/* Size (bytes) of each LLI buffer allocated for one transfer */ -# define PL08X_LLI_TSFR_SIZE 0x2000 +/* The order of words in an LLI. */ +#define PL080_LLI_SRC 0 +#define PL080_LLI_DST 1 +#define PL080_LLI_LLI 2 +#define PL080_LLI_CCTL 3 +#define PL080S_LLI_CCTL2 4 + +/* Total words in an LLI. */ +#define PL080_LLI_WORDS 4 +#define PL080S_LLI_WORDS 8 -/* Maximum times we call dma_pool_alloc on this pool without freeing */ -#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli)) +/* + * Number of LLIs in each LLI buffer allocated for one transfer + * (maximum times we call dma_pool_alloc on this pool without freeing) + */ +#define MAX_NUM_TSFR_LLIS 512 #define PL08X_ALIGN 8 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) { - return container_of(chan, struct pl08x_dma_chan, chan); + return container_of(chan, struct pl08x_dma_chan, vc.chan); } static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) { - return container_of(tx, struct pl08x_txd, tx); + return container_of(tx, struct pl08x_txd, vd.tx); +} + +/* + * Mux handling. + * + * This gives us the DMA request input to the PL08x primecell which the + * peripheral described by the channel data will be routed to, possibly + * via a board/SoC specific external MUX. One important point to note + * here is that this does not depend on the physical channel. + */ +static int pl08x_request_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + int ret; + + if (plchan->mux_use++ == 0 && pd->get_xfer_signal) { + ret = pd->get_xfer_signal(plchan->cd); + if (ret < 0) { + plchan->mux_use = 0; + return ret; + } + + plchan->signal = ret; + } + return 0; +} + +static void pl08x_release_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + + if (plchan->signal >= 0) { + WARN_ON(plchan->mux_use == 0); + + if (--plchan->mux_use == 0 && pd->put_xfer_signal) { + pd->put_xfer_signal(plchan->cd, plchan->signal); + plchan->signal = -1; + } + } } /* @@ -173,41 +350,62 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) { unsigned int val; - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); return val & PL080_CONFIG_ACTIVE; } +static void pl08x_write_lli(struct pl08x_driver_data *pl08x, + struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg) +{ + if (pl08x->vd->pl080s) + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n", + phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], + lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], + lli[PL080S_LLI_CCTL2], ccfg); + else + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], + lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg); + + writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR); + writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR); + writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI); + writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL); + + if (pl08x->vd->pl080s) + writel_relaxed(lli[PL080S_LLI_CCTL2], + phychan->base + PL080S_CH_CONTROL2); + + writel(ccfg, phychan->reg_config); +} + /* * Set the initial DMA register values i.e. those for the first LLI * The next LLI pointer and the configuration interrupt bit have * been set when the LLIs were constructed. Poke them into the hardware * and start the transfer. */ -static void pl08x_start_txd(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) +static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_lli *lli = &txd->llis_va[0]; + struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc); + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); u32 val; + list_del(&txd->vd.node); + plchan->at = txd; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", - phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, - txd->ccfg); - - writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); - writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); - writel(lli->lli, phychan->base + PL080_CH_LLI); - writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); + pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -215,11 +413,11 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, cpu_relax(); /* Do not access config register until channel shows as inactive */ - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); - writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->reg_config); } /* @@ -238,9 +436,9 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) int timeout; /* Set the HALT bit and wait for the FIFO to drain */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val |= PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); /* Wait for channel inactive */ for (timeout = 1000; timeout; timeout--) { @@ -257,9 +455,9 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) u32 val; /* Clear the HALT bit */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val &= ~PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); } /* @@ -271,12 +469,12 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - u32 val = readl(ch->base + PL080_CH_CONFIG); + u32 val = readl(ch->reg_config); val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK); - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR); writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR); @@ -287,6 +485,28 @@ static inline u32 get_bytes_in_cctl(u32 cctl) /* The source width defines the number of bytes */ u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK; + cctl &= PL080_CONTROL_SWIDTH_MASK; + + switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { + case PL080_WIDTH_8BIT: + break; + case PL080_WIDTH_16BIT: + bytes *= 2; + break; + case PL080_WIDTH_32BIT: + bytes *= 4; + break; + } + return bytes; +} + +static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1) +{ + /* The source width defines the number of bytes */ + u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK; + + cctl &= PL080_CONTROL_SWIDTH_MASK; + switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { case PL080_WIDTH_8BIT: break; @@ -303,62 +523,67 @@ static inline u32 get_bytes_in_cctl(u32 cctl) /* The channel should be paused when calling this */ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { + struct pl08x_driver_data *pl08x = plchan->host; + const u32 *llis_va, *llis_va_limit; struct pl08x_phy_chan *ch; + dma_addr_t llis_bus; struct pl08x_txd *txd; - unsigned long flags; - size_t bytes = 0; + u32 llis_max_words; + size_t bytes; + u32 clli; - spin_lock_irqsave(&plchan->lock, flags); ch = plchan->phychan; txd = plchan->at; + if (!ch || !txd) + return 0; + /* * Follow the LLIs to get the number of remaining * bytes in the currently active transaction. */ - if (ch && txd) { - u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; + clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; - /* First get the remaining bytes in the active transfer */ + /* First get the remaining bytes in the active transfer */ + if (pl08x->vd->pl080s) + bytes = get_bytes_in_cctl_pl080s( + readl(ch->base + PL080_CH_CONTROL), + readl(ch->base + PL080S_CH_CONTROL2)); + else bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); - if (clli) { - struct pl08x_lli *llis_va = txd->llis_va; - dma_addr_t llis_bus = txd->llis_bus; - int index; + if (!clli) + return bytes; - BUG_ON(clli < llis_bus || clli >= llis_bus + - sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); + llis_va = txd->llis_va; + llis_bus = txd->llis_bus; - /* - * Locate the next LLI - as this is an array, - * it's simple maths to find. - */ - index = (clli - llis_bus) / sizeof(struct pl08x_lli); + llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS; + BUG_ON(clli < llis_bus || clli >= llis_bus + + sizeof(u32) * llis_max_words); - for (; index < MAX_NUM_TSFR_LLIS; index++) { - bytes += get_bytes_in_cctl(llis_va[index].cctl); + /* + * Locate the next LLI - as this is an array, + * it's simple maths to find. + */ + llis_va += (clli - llis_bus) / sizeof(u32); - /* - * A LLI pointer of 0 terminates the LLI list - */ - if (!llis_va[index].lli) - break; - } - } - } + llis_va_limit = llis_va + llis_max_words; - /* Sum up all queued transactions */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *txdi; - list_for_each_entry(txdi, &plchan->pend_list, node) { - struct pl08x_sg *dsg; - list_for_each_entry(dsg, &txd->dsg_list, node) - bytes += dsg->len; - } - } + for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) { + if (pl08x->vd->pl080s) + bytes += get_bytes_in_cctl_pl080s( + llis_va[PL080_LLI_CCTL], + llis_va[PL080S_LLI_CCTL2]); + else + bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); - spin_unlock_irqrestore(&plchan->lock, flags); + /* + * A LLI pointer going backward terminates the LLI list + */ + if (llis_va[PL080_LLI_LLI] <= clli) + break; + } return bytes; } @@ -383,9 +608,8 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, spin_lock_irqsave(&ch->lock, flags); - if (!ch->serving) { + if (!ch->locked && !ch->serving) { ch->serving = virt_chan; - ch->signal = -1; spin_unlock_irqrestore(&ch->lock, flags); break; } @@ -398,25 +622,114 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } - pm_runtime_get_sync(&pl08x->adev->dev); return ch; } +/* Mark the physical channel as free. Note, this write is atomic. */ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - unsigned long flags; + ch->serving = NULL; +} - spin_lock_irqsave(&ch->lock, flags); +/* + * Try to allocate a physical channel. When successful, assign it to + * this virtual channel, and initiate the next descriptor. The + * virtual channel lock must be held at this point. + */ +static void pl08x_phy_alloc_and_start(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_phy_chan *ch; - /* Stop the channel and clear its interrupts */ - pl08x_terminate_phy_chan(pl08x, ch); + ch = pl08x_get_phy_channel(pl08x, plchan); + if (!ch) { + dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); + plchan->state = PL08X_CHAN_WAITING; + return; + } - pm_runtime_put(&pl08x->adev->dev); + dev_dbg(&pl08x->adev->dev, "allocated physical channel %d for xfer on %s\n", + ch->id, plchan->name); - /* Mark it as free */ - ch->serving = NULL; - spin_unlock_irqrestore(&ch->lock, flags); + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} + +static void pl08x_phy_reassign_start(struct pl08x_phy_chan *ch, + struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + + dev_dbg(&pl08x->adev->dev, "reassigned physical channel %d for xfer on %s\n", + ch->id, plchan->name); + + /* + * We do this without taking the lock; we're really only concerned + * about whether this pointer is NULL or not, and we're guaranteed + * that this will only be called when it _already_ is non-NULL. + */ + ch->serving = plchan; + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} + +/* + * Free a physical DMA channel, potentially reallocating it to another + * virtual channel if we have any pending. + */ +static void pl08x_phy_free(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_dma_chan *p, *next; + + retry: + next = NULL; + + /* Find a waiting virtual channel for the next transfer. */ + list_for_each_entry(p, &pl08x->memcpy.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + + if (!next) { + list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + } + + /* Ensure that the physical channel is stopped */ + pl08x_terminate_phy_chan(pl08x, plchan->phychan); + + if (next) { + bool success; + + /* + * Eww. We know this isn't going to deadlock + * but lockdep probably doesn't. + */ + spin_lock(&next->vc.lock); + /* Re-check the state now that we have the lock */ + success = next->state == PL08X_CHAN_WAITING; + if (success) + pl08x_phy_reassign_start(plchan->phychan, next); + spin_unlock(&next->vc.lock); + + /* If the state changed, try to find another channel */ + if (!success) + goto retry; + } else { + /* No more jobs, so free up the physical channel */ + pl08x_put_phy_channel(pl08x, plchan->phychan); + } + + plchan->phychan = NULL; + plchan->state = PL08X_CHAN_IDLE; } /* @@ -480,6 +793,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, break; } + tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK; retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT; return retbits; } @@ -524,20 +838,26 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, /* * Fills in one LLI for a certain transfer descriptor and advance the counter */ -static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, - int num_llis, int len, u32 cctl) +static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, + struct pl08x_lli_build_data *bd, + int num_llis, int len, u32 cctl, u32 cctl2) { - struct pl08x_lli *llis_va = bd->txd->llis_va; + u32 offset = num_llis * pl08x->lli_words; + u32 *llis_va = bd->txd->llis_va + offset; dma_addr_t llis_bus = bd->txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); - llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = bd->srcbus.addr; - llis_va[num_llis].dst = bd->dstbus.addr; - llis_va[num_llis].lli = llis_bus + (num_llis + 1) * - sizeof(struct pl08x_lli); - llis_va[num_llis].lli |= bd->lli_bus; + /* Advance the offset to next LLI. */ + offset += pl08x->lli_words; + + llis_va[PL080_LLI_SRC] = bd->srcbus.addr; + llis_va[PL080_LLI_DST] = bd->dstbus.addr; + llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset); + llis_va[PL080_LLI_LLI] |= bd->lli_bus; + llis_va[PL080_LLI_CCTL] = cctl; + if (pl08x->vd->pl080s) + llis_va[PL080S_LLI_CCTL2] = cctl2; if (cctl & PL080_CONTROL_SRC_INCR) bd->srcbus.addr += len; @@ -549,14 +869,53 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd, - u32 *cctl, u32 len, int num_llis, size_t *total_bytes) +static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x, + struct pl08x_lli_build_data *bd, u32 *cctl, u32 len, + int num_llis, size_t *total_bytes) { *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); - pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl); + pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len); (*total_bytes) += len; } +#ifdef VERBOSE_DEBUG +static void pl08x_dump_lli(struct pl08x_driver_data *pl08x, + const u32 *llis_va, int num_llis) +{ + int i; + + if (pl08x->vd->pl080s) { + dev_vdbg(&pl08x->adev->dev, + "%-3s %-9s %-10s %-10s %-10s %-10s %s\n", + "lli", "", "csrc", "cdst", "clli", "cctl", "cctl2"); + for (i = 0; i < num_llis; i++) { + dev_vdbg(&pl08x->adev->dev, + "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL], + llis_va[PL080S_LLI_CCTL2]); + llis_va += pl08x->lli_words; + } + } else { + dev_vdbg(&pl08x->adev->dev, + "%-3s %-9s %-10s %-10s %-10s %s\n", + "lli", "", "csrc", "cdst", "clli", "cctl"); + for (i = 0; i < num_llis; i++) { + dev_vdbg(&pl08x->adev->dev, + "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL]); + llis_va += pl08x->lli_words; + } + } +} +#else +static inline void pl08x_dump_lli(struct pl08x_driver_data *pl08x, + const u32 *llis_va, int num_llis) {} +#endif + /* * This fills in the table of LLIs for the transfer descriptor * Note that we assume we never have to change the burst sizes @@ -570,7 +929,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, int num_llis = 0; u32 cctl, early_bytes = 0; size_t max_bytes_per_lli, total_bytes; - struct pl08x_lli *llis_va; + u32 *llis_va, *last_lli; struct pl08x_sg *dsg; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); @@ -579,8 +938,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return 0; } - pl08x->pool_ctr++; - bd.txd = txd; bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; cctl = txd->cctl; @@ -607,10 +964,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", - bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", + dev_vdbg(&pl08x->adev->dev, + "src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n", + (u64)bd.srcbus.addr, + cctl & PL080_CONTROL_SRC_INCR ? "+" : "", bd.srcbus.buswidth, - bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", + (u64)bd.dstbus.addr, + cctl & PL080_CONTROL_DST_INCR ? "+" : "", bd.dstbus.buswidth, bd.remainder); dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", @@ -648,8 +1008,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return 0; } - if ((bd.srcbus.addr % bd.srcbus.buswidth) || - (bd.srcbus.addr % bd.srcbus.buswidth)) { + if (!IS_BUS_ALIGNED(&bd.srcbus) || + !IS_BUS_ALIGNED(&bd.dstbus)) { dev_err(&pl08x->adev->dev, "%s src & dst address must be aligned to src" " & dst width if peripheral is flow controller", @@ -659,7 +1019,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, 0); - pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, + 0, cctl, 0); break; } @@ -670,9 +1031,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ if (bd.remainder < mbus->buswidth) early_bytes = bd.remainder; - else if ((mbus->addr) % (mbus->buswidth)) { - early_bytes = mbus->buswidth - (mbus->addr) % - (mbus->buswidth); + else if (!IS_BUS_ALIGNED(mbus)) { + early_bytes = mbus->buswidth - + (mbus->addr & (mbus->buswidth - 1)); if ((bd.remainder - early_bytes) < mbus->buswidth) early_bytes = bd.remainder; } @@ -681,8 +1042,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs (remain 0x%08x)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, - &total_bytes); + prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes, + num_llis++, &total_bytes); } if (bd.remainder) { @@ -690,7 +1051,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Master now aligned * - if slave is not then we must set its width down */ - if (sbus->addr % sbus->buswidth) { + if (!IS_BUS_ALIGNED(sbus)) { dev_dbg(&pl08x->adev->dev, "%s set down bus width to one byte\n", __func__); @@ -703,7 +1064,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * MIN(buswidths) */ max_bytes_per_lli = bd.srcbus.buswidth * - PL080_CONTROL_TRANSFER_SIZE_MASK; + pl08x->vd->max_transfer_size; dev_vdbg(&pl08x->adev->dev, "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); @@ -738,8 +1099,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, tsize); - pl08x_fill_lli_for_desc(&bd, num_llis++, - lli_len, cctl); + pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, + lli_len, cctl, tsize); total_bytes += lli_len; } @@ -750,8 +1111,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, send odd bytes (remain %zu)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, bd.remainder, - num_llis++, &total_bytes); + prep_byte_width_lli(pl08x, &bd, &cctl, + bd.remainder, num_llis++, &total_bytes); } } @@ -765,49 +1126,37 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (num_llis >= MAX_NUM_TSFR_LLIS) { dev_err(&pl08x->adev->dev, "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", - __func__, (u32) MAX_NUM_TSFR_LLIS); + __func__, MAX_NUM_TSFR_LLIS); return 0; } } llis_va = txd->llis_va; - /* The final LLI terminates the LLI. */ - llis_va[num_llis - 1].lli = 0; - /* The final LLI element shall also fire an interrupt. */ - llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - -#ifdef VERBOSE_DEBUG - { - int i; + last_lli = llis_va + (num_llis - 1) * pl08x->lli_words; - dev_vdbg(&pl08x->adev->dev, - "%-3s %-9s %-10s %-10s %-10s %s\n", - "lli", "", "csrc", "cdst", "clli", "cctl"); - for (i = 0; i < num_llis; i++) { - dev_vdbg(&pl08x->adev->dev, - "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", - i, &llis_va[i], llis_va[i].src, - llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl - ); - } + if (txd->cyclic) { + /* Link back to the first LLI. */ + last_lli[PL080_LLI_LLI] = txd->llis_bus | bd.lli_bus; + } else { + /* The final LLI terminates the LLI. */ + last_lli[PL080_LLI_LLI] = 0; + /* The final LLI element shall also fire an interrupt. */ + last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; } -#endif + + pl08x_dump_lli(pl08x, llis_va, num_llis); return num_llis; } -/* You should call this with the struct pl08x lock held */ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { struct pl08x_sg *dsg, *_dsg; - /* Free the LLI */ if (txd->llis_va) dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); - pl08x->pool_ctr--; - list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { list_del(&dsg->node); kfree(dsg); @@ -816,19 +1165,25 @@ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, kfree(txd); } +static void pl08x_desc_free(struct virt_dma_desc *vd) +{ + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan); + + dma_descriptor_unmap(&vd->tx); + if (!txd->done) + pl08x_release_mux(plchan); + + pl08x_free_txd(plchan->host, txd); +} + static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, struct pl08x_dma_chan *plchan) { - struct pl08x_txd *txdi = NULL; - struct pl08x_txd *next; - - if (!list_empty(&plchan->pend_list)) { - list_for_each_entry_safe(txdi, - next, &plchan->pend_list, node) { - list_del(&txdi->node); - pl08x_free_txd(pl08x, txdi); - } - } + LIST_HEAD(head); + + vchan_get_all_descriptors(&plchan->vc, &head); + vchan_dma_desc_free_list(&plchan->vc, &head); } /* @@ -841,111 +1196,8 @@ static int pl08x_alloc_chan_resources(struct dma_chan *chan) static void pl08x_free_chan_resources(struct dma_chan *chan) { -} - -/* - * This should be called with the channel plchan->lock held - */ -static int prep_phy_channel(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) -{ - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_phy_chan *ch; - int ret; - - /* Check if we already have a channel */ - if (plchan->phychan) { - ch = plchan->phychan; - goto got_channel; - } - - ch = pl08x_get_phy_channel(pl08x, plchan); - if (!ch) { - /* No physical channel available, cope with it */ - dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); - return -EBUSY; - } - - /* - * OK we have a physical channel: for memcpy() this is all we - * need, but for slaves the physical signals may be muxed! - * Can the platform allow us to use this channel? - */ - if (plchan->slave && pl08x->pd->get_signal) { - ret = pl08x->pd->get_signal(plchan); - if (ret < 0) { - dev_dbg(&pl08x->adev->dev, - "unable to use physical channel %d for transfer on %s due to platform restrictions\n", - ch->id, plchan->name); - /* Release physical channel & return */ - pl08x_put_phy_channel(pl08x, ch); - return -EBUSY; - } - ch->signal = ret; - } - - plchan->phychan = ch; - dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", - ch->id, - ch->signal, - plchan->name); - -got_channel: - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_MEM_TO_DEV) - txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_DEV_TO_MEM) - txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; - - plchan->phychan_hold++; - - return 0; -} - -static void release_phy_channel(struct pl08x_dma_chan *plchan) -{ - struct pl08x_driver_data *pl08x = plchan->host; - - if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - plchan->phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, plchan->phychan); - plchan->phychan = NULL; -} - -static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) -{ - struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); - struct pl08x_txd *txd = to_pl08x_txd(tx); - unsigned long flags; - - spin_lock_irqsave(&plchan->lock, flags); - - plchan->chan.cookie += 1; - if (plchan->chan.cookie < 0) - plchan->chan.cookie = 1; - tx->cookie = plchan->chan.cookie; - - /* Put this onto the pending list */ - list_add_tail(&txd->node, &plchan->pend_list); - - /* - * If there was no physical channel available for this memcpy, - * stack the request up and indicate that the channel is waiting - * for a free physical channel. - */ - if (!plchan->slave && !plchan->phychan) { - /* Do this memcpy whenever there is a channel ready */ - plchan->state = PL08X_CHAN_WAITING; - plchan->waiting = txd; - } else { - plchan->phychan_hold--; - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - return tx->cookie; + /* Ensure all queued descriptors are freed */ + vchan_free_chan_resources(to_virt_chan(chan)); } static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( @@ -965,37 +1217,53 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; + struct virt_dma_desc *vd; + unsigned long flags; enum dma_status ret; - u32 bytesleft = 0; + size_t bytes = 0; - last_used = plchan->chan.cookie; - last_complete = plchan->lc; + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_COMPLETE) + return ret; - ret = dma_async_is_complete(cookie, last_complete, last_used); - if (ret == DMA_SUCCESS) { - dma_set_tx_state(txstate, last_complete, last_used, 0); + /* + * There's no point calculating the residue if there's + * no txstate to store the value. + */ + if (!txstate) { + if (plchan->state == PL08X_CHAN_PAUSED) + ret = DMA_PAUSED; return ret; } + spin_lock_irqsave(&plchan->vc.lock, flags); + ret = dma_cookie_status(chan, cookie, txstate); + if (ret != DMA_COMPLETE) { + vd = vchan_find_desc(&plchan->vc, cookie); + if (vd) { + /* On the issued list, so hasn't been processed yet */ + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_sg *dsg; + + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; + } else { + bytes = pl08x_getbytes_chan(plchan); + } + } + spin_unlock_irqrestore(&plchan->vc.lock, flags); + /* * This cookie not complete yet + * Get number of bytes left in the active transactions and queue */ - last_used = plchan->chan.cookie; - last_complete = plchan->lc; - - /* Get number of bytes left in the active transactions and queue */ - bytesleft = pl08x_getbytes_chan(plchan); - - dma_set_tx_state(txstate, last_complete, last_used, - bytesleft); + dma_set_residue(txstate, bytes); - if (plchan->state == PL08X_CHAN_PAUSED) - return DMA_PAUSED; + if (plchan->state == PL08X_CHAN_PAUSED && ret == DMA_IN_PROGRESS) + ret = DMA_PAUSED; /* Whether waiting or running, we're in progress */ - return DMA_IN_PROGRESS; + return ret; } /* PrimeCell DMA extension */ @@ -1091,38 +1359,14 @@ static u32 pl08x_burst(u32 maxburst) return burst_sizes[i].reg; } -static int dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) +static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan, + enum dma_slave_buswidth addr_width, u32 maxburst) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; - enum dma_slave_buswidth addr_width; - u32 width, burst, maxburst; - u32 cctl = 0; - - if (!plchan->slave) - return -EINVAL; - - /* Transfer direction */ - plchan->runtime_direction = config->direction; - if (config->direction == DMA_MEM_TO_DEV) { - addr_width = config->dst_addr_width; - maxburst = config->dst_maxburst; - } else if (config->direction == DMA_DEV_TO_MEM) { - addr_width = config->src_addr_width; - maxburst = config->src_maxburst; - } else { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien transfer direction\n"); - return -EINVAL; - } + u32 width, burst, cctl = 0; width = pl08x_width(addr_width); - if (width == ~0) { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width\n"); - return -EINVAL; - } + if (width == ~0) + return ~0; cctl |= width << PL080_CONTROL_SWIDTH_SHIFT; cctl |= width << PL080_CONTROL_DWIDTH_SHIFT; @@ -1139,26 +1383,31 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; - if (plchan->runtime_direction == DMA_DEV_TO_MEM) { - plchan->src_addr = config->src_addr; - plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | - pl08x_select_bus(plchan->cd->periph_buses, - pl08x->mem_buses); - } else { - plchan->dst_addr = config->dst_addr; - plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(pl08x->mem_buses, - plchan->cd->periph_buses); + return pl08x_cctl(cctl); +} + +static int dma_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + + if (!plchan->slave) + return -EINVAL; + + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + if (config->device_fc && pl08x->vd->pl080s) { + dev_err(&pl08x->adev->dev, + "%s: PL080S does not support peripheral flow control\n", + __func__); + return -EINVAL; } - dev_dbg(&pl08x->adev->dev, - "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x\n", - dma_chan_name(chan), plchan->name, - (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", - addr_width, - maxburst, - cctl); + plchan->cfg = *config; return 0; } @@ -1172,95 +1421,19 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); unsigned long flags; - spin_lock_irqsave(&plchan->lock, flags); - /* Something is already active, or we're waiting for a channel... */ - if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { - spin_unlock_irqrestore(&plchan->lock, flags); - return; - } - - /* Take the first element in the queue and execute it */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - plchan->state = PL08X_CHAN_RUNNING; - - pl08x_start_txd(plchan, next); - } - - spin_unlock_irqrestore(&plchan->lock, flags); -} - -static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) -{ - struct pl08x_driver_data *pl08x = plchan->host; - unsigned long flags; - int num_llis, ret; - - num_llis = pl08x_fill_llis_for_desc(pl08x, txd); - if (!num_llis) { - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EINVAL; + spin_lock_irqsave(&plchan->vc.lock, flags); + if (vchan_issue_pending(&plchan->vc)) { + if (!plchan->phychan && plchan->state != PL08X_CHAN_WAITING) + pl08x_phy_alloc_and_start(plchan); } - - spin_lock_irqsave(&plchan->lock, flags); - - /* - * See if we already have a physical channel allocated, - * else this is the time to try to get one. - */ - ret = prep_phy_channel(plchan, txd); - if (ret) { - /* - * No physical channel was available. - * - * memcpy transfers can be sorted out at submission time. - * - * Slave transfers may have been denied due to platform - * channel muxing restrictions. Since there is no guarantee - * that this will ever be resolved, and the signal must be - * acquired AFTER acquiring the physical channel, we will let - * them be NACK:ed with -EBUSY here. The drivers can retry - * the prep() call if they are eager on doing this using DMA. - */ - if (plchan->slave) { - pl08x_free_txd_list(pl08x, plchan); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EBUSY; - } - } else - /* - * Else we're all set, paused and ready to roll, status - * will switch to PL08X_CHAN_RUNNING when we call - * issue_pending(). If there is something running on the - * channel already we don't change its state. - */ - if (plchan->state == PL08X_CHAN_IDLE) - plchan->state = PL08X_CHAN_PAUSED; - - spin_unlock_irqrestore(&plchan->lock, flags); - - return 0; + spin_unlock_irqrestore(&plchan->vc.lock, flags); } -static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, - unsigned long flags) +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { - dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); - txd->tx.flags = flags; - txd->tx.tx_submit = pl08x_tx_submit; - INIT_LIST_HEAD(&txd->node); INIT_LIST_HEAD(&txd->dsg_list); /* Always enable error and terminal interrupts */ @@ -1283,7 +1456,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_sg *dsg; int ret; - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); @@ -1299,14 +1472,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( } list_add_tail(&dsg->node, &txd->dsg_list); - txd->direction = DMA_NONE; dsg->src_addr = src; dsg->dst_addr = dest; dsg->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl & + txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy & ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ @@ -1316,53 +1488,53 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->cctl |= pl08x_select_bus(pl08x->mem_buses, pl08x->mem_buses); - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } -static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( - struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) +static struct pl08x_txd *pl08x_init_txd( + struct dma_chan *chan, + enum dma_transfer_direction direction, + dma_addr_t *slave_addr) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - struct pl08x_sg *dsg; - struct scatterlist *sg; - dma_addr_t slave_addr; + enum dma_slave_buswidth addr_width; int ret, tmp; + u8 src_buses, dst_buses; + u32 maxburst, cctl; - dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", - __func__, sgl->length, plchan->name); - - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; } - if (direction != plchan->runtime_direction) - dev_err(&pl08x->adev->dev, "%s DMA setup does not match " - "the direction configured for the PrimeCell\n", - __func__); - /* * Set up addresses, the PrimeCell configured address * will take precedence since this may configure the * channel target address dynamically at runtime. */ - txd->direction = direction; - if (direction == DMA_MEM_TO_DEV) { - txd->cctl = plchan->dst_cctl; - slave_addr = plchan->dst_addr; + cctl = PL080_CONTROL_SRC_INCR; + *slave_addr = plchan->cfg.dst_addr; + addr_width = plchan->cfg.dst_addr_width; + maxburst = plchan->cfg.dst_maxburst; + src_buses = pl08x->mem_buses; + dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_DEV_TO_MEM) { - txd->cctl = plchan->src_cctl; - slave_addr = plchan->src_addr; + cctl = PL080_CONTROL_DST_INCR; + *slave_addr = plchan->cfg.src_addr; + addr_width = plchan->cfg.src_addr_width; + maxburst = plchan->cfg.src_maxburst; + src_buses = plchan->cd->periph_buses; + dst_buses = pl08x->mem_buses; } else { pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, @@ -1370,7 +1542,17 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (plchan->cd->device_fc) + cctl |= pl08x_get_cctl(plchan, addr_width, maxburst); + if (cctl == ~0) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, + "DMA slave configuration botched?\n"); + return NULL; + } + + txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses); + + if (plchan->cfg.device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else @@ -1379,31 +1561,136 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_request_mux(plchan); + if (ret < 0) { + pl08x_free_txd(pl08x, txd); + dev_dbg(&pl08x->adev->dev, + "unable to mux for transfer on %s due to platform restrictions\n", + plchan->name); + return NULL; + } + + dev_dbg(&pl08x->adev->dev, "allocated DMA request signal %d for xfer on %s\n", + plchan->signal, plchan->name); + + /* Assign the flow control signal to this channel */ + if (direction == DMA_MEM_TO_DEV) + txd->ccfg |= plchan->signal << PL080_CONFIG_DST_SEL_SHIFT; + else + txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + + return txd; +} + +static int pl08x_tx_add_sg(struct pl08x_txd *txd, + enum dma_transfer_direction direction, + dma_addr_t slave_addr, + dma_addr_t buf_addr, + unsigned int len) +{ + struct pl08x_sg *dsg; + + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) + return -ENOMEM; + + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = len; + if (direction == DMA_MEM_TO_DEV) { + dsg->src_addr = buf_addr; + dsg->dst_addr = slave_addr; + } else { + dsg->src_addr = slave_addr; + dsg->dst_addr = buf_addr; + } + + return 0; +} + +static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + struct scatterlist *sg; + int ret, tmp; + dma_addr_t slave_addr; + + dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", + __func__, sg_dma_len(sgl), plchan->name); + + txd = pl08x_init_txd(chan, direction, &slave_addr); + if (!txd) + return NULL; + for_each_sg(sgl, sg, sg_len, tmp) { - dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); - if (!dsg) { + ret = pl08x_tx_add_sg(txd, direction, slave_addr, + sg_dma_address(sg), + sg_dma_len(sg)); + if (ret) { + pl08x_release_mux(plchan); pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", __func__); return NULL; } - list_add_tail(&dsg->node, &txd->dsg_list); + } - dsg->len = sg_dma_len(sg); - if (direction == DMA_MEM_TO_DEV) { - dsg->src_addr = sg_phys(sg); - dsg->dst_addr = slave_addr; - } else { - dsg->src_addr = slave_addr; - dsg->dst_addr = sg_phys(sg); + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); + return NULL; + } + + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); +} + +static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + int ret, tmp; + dma_addr_t slave_addr; + + dev_dbg(&pl08x->adev->dev, + "%s prepare cyclic transaction of %d/%d bytes %s %s\n", + __func__, period_len, buf_len, + direction == DMA_MEM_TO_DEV ? "to" : "from", + plchan->name); + + txd = pl08x_init_txd(chan, direction, &slave_addr); + if (!txd) + return NULL; + + txd->cyclic = true; + txd->cctl |= PL080_CONTROL_TC_IRQ_EN; + for (tmp = 0; tmp < buf_len; tmp += period_len) { + ret = pl08x_tx_add_sg(txd, direction, slave_addr, + buf_addr + tmp, period_len); + if (ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); + return NULL; } } - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, @@ -1424,9 +1711,9 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * Anything succeeds on channels with no physical allocation and * no queued transfers. */ - spin_lock_irqsave(&plchan->lock, flags); + spin_lock_irqsave(&plchan->vc.lock, flags); if (!plchan->phychan && !plchan->at) { - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return 0; } @@ -1435,17 +1722,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, plchan->state = PL08X_CHAN_IDLE; if (plchan->phychan) { - pl08x_terminate_phy_chan(pl08x, plchan->phychan); - /* * Mark physical channel as free and free any slave * signal */ - release_phy_channel(plchan); + pl08x_phy_free(plchan); } /* Dequeue jobs and free LLIs */ if (plchan->at) { - pl08x_free_txd(pl08x, plchan->at); + pl08x_desc_free(&plchan->at->vd); plchan->at = NULL; } /* Dequeue jobs not yet fired as well */ @@ -1465,7 +1750,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return ret; } @@ -1487,6 +1772,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) return false; } +EXPORT_SYMBOL_GPL(pl08x_filter_id); /* * Just check that the device is there and active @@ -1496,126 +1782,12 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { + /* The Nomadik variant does not have the config register */ + if (pl08x->vd->nomadik) + return; writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } -static void pl08x_unmap_buffers(struct pl08x_txd *txd) -{ - struct device *dev = txd->tx.chan->device->dev; - struct pl08x_sg *dsg; - - if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - else { - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - } - } - if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - else - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - } -} - -static void pl08x_tasklet(unsigned long data) -{ - struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_txd *txd; - unsigned long flags; - - spin_lock_irqsave(&plchan->lock, flags); - - txd = plchan->at; - plchan->at = NULL; - - if (txd) { - /* Update last completed */ - plchan->lc = txd->tx.cookie; - } - - /* If a new descriptor is queued, set it up plchan->at is NULL here */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - - pl08x_start_txd(plchan, next); - } else if (plchan->phychan_hold) { - /* - * This channel is still in use - we have a new txd being - * prepared and will soon be queued. Don't give up the - * physical channel. - */ - } else { - struct pl08x_dma_chan *waiting = NULL; - - /* - * No more jobs, so free up the physical channel - * Free any allocated signal on slave transfers too - */ - release_phy_channel(plchan); - plchan->state = PL08X_CHAN_IDLE; - - /* - * And NOW before anyone else can grab that free:d up - * physical channel, see if there is some memcpy pending - * that seriously needs to start because of being stacked - * up while we were choking the physical channels with data. - */ - list_for_each_entry(waiting, &pl08x->memcpy.channels, - chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { - int ret; - - /* This should REALLY not fail now */ - ret = prep_phy_channel(waiting, - waiting->waiting); - BUG_ON(ret); - waiting->phychan_hold--; - waiting->state = PL08X_CHAN_RUNNING; - waiting->waiting = NULL; - pl08x_issue_pending(&waiting->chan); - break; - } - } - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - if (txd) { - dma_async_tx_callback callback = txd->tx.callback; - void *callback_param = txd->tx.callback_param; - - /* Don't try to unmap buffers on slave channels */ - if (!plchan->slave) - pl08x_unmap_buffers(txd); - - /* Free the descriptor */ - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - - /* Callback to signal completion */ - if (callback) - callback(callback_param); - } -} - static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; @@ -1628,7 +1800,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) __func__, err); writel(err, pl08x->base + PL080_ERR_CLEAR); } - tc = readl(pl08x->base + PL080_INT_STATUS); + tc = readl(pl08x->base + PL080_TC_STATUS); if (tc) writel(tc, pl08x->base + PL080_TC_CLEAR); @@ -1640,6 +1812,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + struct pl08x_txd *tx; if (!plchan) { dev_err(&pl08x->adev->dev, @@ -1648,8 +1821,31 @@ static irqreturn_t pl08x_irq(int irq, void *dev) continue; } - /* Schedule tasklet on this channel */ - tasklet_schedule(&plchan->tasklet); + spin_lock(&plchan->vc.lock); + tx = plchan->at; + if (tx && tx->cyclic) { + vchan_cyclic_callback(&tx->vd); + } else if (tx) { + plchan->at = NULL; + /* + * This descriptor is done, release its mux + * reservation. + */ + pl08x_release_mux(plchan); + tx->done = true; + vchan_cookie_complete(&tx->vd); + + /* + * And start the next descriptor (if any), + * otherwise free this channel. + */ + if (vchan_next_desc(&plchan->vc)) + pl08x_start_next_txd(plchan); + else + pl08x_phy_free(plchan); + } + spin_unlock(&plchan->vc.lock); + mask |= (1 << i); } } @@ -1659,16 +1855,10 @@ static irqreturn_t pl08x_irq(int irq, void *dev) static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) { - u32 cctl = pl08x_cctl(chan->cd->cctl); - chan->slave = true; chan->name = chan->cd->bus_id; - chan->src_addr = chan->cd->addr; - chan->dst_addr = chan->cd->addr; - chan->src_cctl = cctl | PL080_CONTROL_DST_INCR | - pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses); - chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses); + chan->cfg.src_addr = chan->cd->addr; + chan->cfg.dst_addr = chan->cd->addr; } /* @@ -1698,6 +1888,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->host = pl08x; chan->state = PL08X_CHAN_IDLE; + chan->signal = -1; if (slave) { chan->cd = &pl08x->pd->slave_channels[i]; @@ -1710,27 +1901,12 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, return -ENOMEM; } } - if (chan->cd->circular_buffer) { - dev_err(&pl08x->adev->dev, - "channel %s: circular buffers not supported\n", - chan->name); - kfree(chan); - continue; - } dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); - chan->chan.device = dmadev; - chan->chan.cookie = 0; - chan->lc = 0; - - spin_lock_init(&chan->lock); - INIT_LIST_HEAD(&chan->pend_list); - tasklet_init(&chan->tasklet, pl08x_tasklet, - (unsigned long) chan); - - list_add_tail(&chan->chan.device_node, &dmadev->channels); + chan->vc.desc_free = pl08x_desc_free; + vchan_init(&chan->vc, dmadev); } dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n", i, slave ? "slave" : "memcpy"); @@ -1743,8 +1919,8 @@ static void pl08x_free_virtual_channels(struct dma_device *dmadev) struct pl08x_dma_chan *next; list_for_each_entry_safe(chan, - next, &dmadev->channels, chan.device_node) { - list_del(&chan->chan.device_node); + next, &dmadev->channels, vc.chan.device_node) { + list_del(&chan->vc.chan.device_node); kfree(chan); } } @@ -1786,8 +1962,10 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) spin_lock_irqsave(&ch->lock, flags); virt_chan = ch->serving; - seq_printf(s, "%d\t\t%s\n", - ch->id, virt_chan ? virt_chan->name : "(none)"); + seq_printf(s, "%d\t\t%s%s\n", + ch->id, + virt_chan ? virt_chan->name : "(none)", + ch->locked ? " LOCKED" : ""); spin_unlock_irqrestore(&ch->lock, flags); } @@ -1795,7 +1973,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual memcpy channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->memcpy.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1803,7 +1981,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual slave channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1841,6 +2019,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) { struct pl08x_driver_data *pl08x; const struct vendor_data *vd = id->data; + u32 tsfr_size; int ret = 0; int i; @@ -1848,6 +2027,11 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) if (ret) return ret; + /* Ensure that we can do DMA */ + ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32)); + if (ret) + goto out_no_pl08x; + /* Create the driver state holder */ pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); if (!pl08x) { @@ -1855,9 +2039,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_pl08x; } - pm_runtime_set_active(&adev->dev); - pm_runtime_enable(&adev->dev); - /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1871,6 +2052,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Initialize slave engine */ dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask); + dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask); pl08x->slave.dev = &adev->dev; pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources; pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources; @@ -1878,12 +2060,14 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->slave.device_tx_status = pl08x_dma_tx_status; pl08x->slave.device_issue_pending = pl08x_issue_pending; pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg; + pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic; pl08x->slave.device_control = pl08x_control; /* Get the platform data */ pl08x->pd = dev_get_platdata(&adev->dev); if (!pl08x->pd) { dev_err(&adev->dev, "no platform data supplied\n"); + ret = -EINVAL; goto out_no_platdata; } @@ -1899,16 +2083,20 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->mem_buses = pl08x->pd->mem_buses; } + if (vd->pl080s) + pl08x->lli_words = PL080S_LLI_WORDS; + else + pl08x->lli_words = PL080_LLI_WORDS; + tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32); + /* A DMA memory pool for LLIs, align on 1-byte boundary */ pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev, - PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0); + tsfr_size, PL08X_ALIGN, 0); if (!pl08x->pool) { ret = -ENOMEM; goto out_no_lli_pool; } - spin_lock_init(&pl08x->lock); - pl08x->base = ioremap(adev->res.start, resource_size(&adev->res)); if (!pl08x->base) { ret = -ENOMEM; @@ -1922,8 +2110,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); - ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED, - DRIVER_NAME, pl08x); + ret = request_irq(adev->irq[0], pl08x_irq, 0, DRIVER_NAME, pl08x); if (ret) { dev_err(&adev->dev, "%s failed to request interrupt %d\n", __func__, adev->irq[0]); @@ -1931,12 +2118,13 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) } /* Initialize physical channels */ - pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)), + pl08x->phy_chans = kzalloc((vd->channels * sizeof(*pl08x->phy_chans)), GFP_KERNEL); if (!pl08x->phy_chans) { dev_err(&adev->dev, "%s failed to allocate " "physical channel holders\n", __func__); + ret = -ENOMEM; goto out_no_phychans; } @@ -1945,9 +2133,24 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ch->id = i; ch->base = pl08x->base + PL080_Cx_BASE(i); + ch->reg_config = ch->base + vd->config_offset; spin_lock_init(&ch->lock); - ch->serving = NULL; - ch->signal = -1; + + /* + * Nomadik variants can have channels that are locked + * down for the secure world only. Lock up these channels + * by perpetually serving a dummy virtual channel. + */ + if (vd->nomadik) { + u32 val; + + val = readl(ch->reg_config); + if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) { + dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i); + ch->locked = true; + } + } + dev_dbg(&adev->dev, "physical channel %d is %s\n", i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); } @@ -1966,7 +2169,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Register slave channels */ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave, pl08x->pd->num_slave_channels, true); - if (ret <= 0) { + if (ret < 0) { dev_warn(&pl08x->adev->dev, "%s failed to enumerate slave channels - %d\n", __func__, ret); @@ -1992,11 +2195,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) amba_set_drvdata(adev, pl08x); init_pl08x_debugfs(pl08x); - dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", - amba_part(adev), amba_rev(adev), + dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n", + amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); - pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2015,9 +2217,6 @@ out_no_ioremap: dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: - pm_runtime_put(&adev->dev); - pm_runtime_disable(&adev->dev); - kfree(pl08x); out_no_pl08x: amba_release_regions(adev); @@ -2026,16 +2225,41 @@ out_no_pl08x: /* PL080 has 8 channels and the PL080 have just 2 */ static struct vendor_data vendor_pl080 = { + .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, +}; + +static struct vendor_data vendor_nomadik = { + .config_offset = PL080_CH_CONFIG, + .channels = 8, + .dualmaster = true, + .nomadik = true, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, +}; + +static struct vendor_data vendor_pl080s = { + .config_offset = PL080S_CH_CONFIG, + .channels = 8, + .pl080s = true, + .max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK, }; static struct vendor_data vendor_pl081 = { + .config_offset = PL080_CH_CONFIG, .channels = 2, .dualmaster = false, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, }; static struct amba_id pl08x_ids[] = { + /* Samsung PL080S variant */ + { + .id = 0x0a141080, + .mask = 0xffffffff, + .data = &vendor_pl080s, + }, /* PL080 */ { .id = 0x00041080, @@ -2050,9 +2274,9 @@ static struct amba_id pl08x_ids[] = { }, /* Nomadik 8815 PL080 variant */ { - .id = 0x00280880, + .id = 0x00280080, .mask = 0x00ffffff, - .data = &vendor_pl080, + .data = &vendor_nomadik, }, { 0, 0 }, }; |