diff options
Diffstat (limited to 'drivers/cpufreq/exynos-cpufreq.c')
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.c | 148 |
1 files changed, 37 insertions, 111 deletions
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index fcd2914d081..1e0ec57bf6e 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -16,35 +16,28 @@ #include <linux/slab.h> #include <linux/regulator/consumer.h> #include <linux/cpufreq.h> -#include <linux/suspend.h> #include <linux/platform_device.h> - -#include <plat/cpu.h> +#include <linux/of.h> #include "exynos-cpufreq.h" static struct exynos_dvfs_info *exynos_info; - static struct regulator *arm_regulator; - static unsigned int locking_frequency; -static bool frequency_locked; -static DEFINE_MUTEX(cpufreq_lock); static int exynos_cpufreq_get_index(unsigned int freq) { struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - int index; + struct cpufreq_frequency_table *pos; - for (index = 0; - freq_table[index].frequency != CPUFREQ_TABLE_END; index++) - if (freq_table[index].frequency == freq) + cpufreq_for_each_entry(pos, freq_table) + if (pos->frequency == freq) break; - if (freq_table[index].frequency == CPUFREQ_TABLE_END) + if (pos->frequency == CPUFREQ_TABLE_END) return -EINVAL; - return index; + return pos - freq_table; } static int exynos_cpufreq_scale(unsigned int target_freq) @@ -54,6 +47,7 @@ static int exynos_cpufreq_scale(unsigned int target_freq) struct cpufreq_policy *policy = cpufreq_cpu_get(0); unsigned int arm_volt, safe_arm_volt = 0; unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz; + struct device *dev = exynos_info->dev; unsigned int old_freq; int index, old_index; int ret = 0; @@ -95,8 +89,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) /* Firstly, voltage up to increase frequency */ ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, arm_volt); + dev_err(dev, "failed to set cpu voltage to %d\n", + arm_volt); return ret; } } @@ -105,8 +99,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) ret = regulator_set_voltage(arm_regulator, safe_arm_volt, safe_arm_volt); if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, safe_arm_volt); + dev_err(dev, "failed to set cpu voltage to %d\n", + safe_arm_volt); return ret; } } @@ -120,8 +114,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); if (ret) { - pr_err("%s: failed to set cpu voltage to %d\n", - __func__, arm_volt); + dev_err(dev, "failed to set cpu voltage to %d\n", + arm_volt); goto out; } } @@ -134,83 +128,13 @@ out: static int exynos_target(struct cpufreq_policy *policy, unsigned int index) { - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - int ret = 0; - - mutex_lock(&cpufreq_lock); - - if (frequency_locked) - goto out; - - ret = exynos_cpufreq_scale(freq_table[index].frequency); - -out: - mutex_unlock(&cpufreq_lock); - - return ret; -} - -#ifdef CONFIG_PM -static int exynos_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; + return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency); } -static int exynos_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -/** - * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume - * context - * @notifier - * @pm_event - * @v - * - * While frequency_locked == true, target() ignores every frequency but - * locking_frequency. The locking_frequency value is the initial frequency, - * which is set by the bootloader. In order to eliminate possible - * inconsistency in clock values, we save and restore frequencies during - * suspend and resume and block CPUFREQ activities. Note that the standard - * suspend/resume cannot be used as they are too deep (syscore_ops) for - * regulator actions. - */ -static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, void *v) -{ - int ret; - - switch (pm_event) { - case PM_SUSPEND_PREPARE: - mutex_lock(&cpufreq_lock); - frequency_locked = true; - mutex_unlock(&cpufreq_lock); - - ret = exynos_cpufreq_scale(locking_frequency); - if (ret < 0) - return NOTIFY_BAD; - - break; - - case PM_POST_SUSPEND: - mutex_lock(&cpufreq_lock); - frequency_locked = false; - mutex_unlock(&cpufreq_lock); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block exynos_cpufreq_nb = { - .notifier_call = exynos_cpufreq_pm_notifier, -}; - static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) { policy->clk = exynos_info->cpu_clk; + policy->suspend_freq = locking_frequency; return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); } @@ -220,15 +144,13 @@ static struct cpufreq_driver exynos_driver = { .target_index = exynos_target, .get = cpufreq_generic_get, .init = exynos_cpufreq_cpu_init, - .exit = cpufreq_generic_exit, .name = "exynos_cpufreq", .attr = cpufreq_generic_attr, #ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW .boost_supported = true, #endif #ifdef CONFIG_PM - .suspend = exynos_cpufreq_suspend, - .resume = exynos_cpufreq_resume, + .suspend = cpufreq_generic_suspend, #endif }; @@ -240,42 +162,46 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) if (!exynos_info) return -ENOMEM; - if (soc_is_exynos4210()) + exynos_info->dev = &pdev->dev; + + if (of_machine_is_compatible("samsung,exynos4210")) { + exynos_info->type = EXYNOS_SOC_4210; ret = exynos4210_cpufreq_init(exynos_info); - else if (soc_is_exynos4212() || soc_is_exynos4412()) + } else if (of_machine_is_compatible("samsung,exynos4212")) { + exynos_info->type = EXYNOS_SOC_4212; ret = exynos4x12_cpufreq_init(exynos_info); - else if (soc_is_exynos5250()) + } else if (of_machine_is_compatible("samsung,exynos4412")) { + exynos_info->type = EXYNOS_SOC_4412; + ret = exynos4x12_cpufreq_init(exynos_info); + } else if (of_machine_is_compatible("samsung,exynos5250")) { + exynos_info->type = EXYNOS_SOC_5250; ret = exynos5250_cpufreq_init(exynos_info); - else - return 0; + } else { + pr_err("%s: Unknown SoC type\n", __func__); + return -ENODEV; + } if (ret) goto err_vdd_arm; if (exynos_info->set_freq == NULL) { - pr_err("%s: No set_freq function (ERR)\n", __func__); + dev_err(&pdev->dev, "No set_freq function (ERR)\n"); goto err_vdd_arm; } arm_regulator = regulator_get(NULL, "vdd_arm"); if (IS_ERR(arm_regulator)) { - pr_err("%s: failed to get resource vdd_arm\n", __func__); + dev_err(&pdev->dev, "failed to get resource vdd_arm\n"); goto err_vdd_arm; } + /* Done here as we want to capture boot frequency */ locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - register_pm_notifier(&exynos_cpufreq_nb); - - if (cpufreq_register_driver(&exynos_driver)) { - pr_err("%s: failed to register cpufreq driver\n", __func__); - goto err_cpufreq; - } - - return 0; -err_cpufreq: - unregister_pm_notifier(&exynos_cpufreq_nb); + if (!cpufreq_register_driver(&exynos_driver)) + return 0; + dev_err(&pdev->dev, "failed to register cpufreq driver\n"); regulator_put(arm_regulator); err_vdd_arm: kfree(exynos_info); |