diff options
Diffstat (limited to 'drivers/clocksource/nomadik-mtu.c')
| -rw-r--r-- | drivers/clocksource/nomadik-mtu.c | 111 |
1 files changed, 77 insertions, 34 deletions
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 8914c3c1c88..a709cfa49d8 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -13,12 +13,15 @@ #include <linux/io.h> #include <linux/clockchips.h> #include <linux/clocksource.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <linux/clk.h> #include <linux/jiffies.h> +#include <linux/delay.h> #include <linux/err.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/sched_clock.h> #include <asm/mach/time.h> -#include <asm/sched_clock.h> /* * The MTU device hosts four different counters, with 4 set of @@ -64,14 +67,15 @@ static void __iomem *mtu_base; static bool clkevt_periodic; static u32 clk_prescale; static u32 nmdk_cycle; /* write-once */ +static struct delay_timer mtu_delay_timer; -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK +#ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ -static u32 notrace nomadik_read_sched_clock(void) +static u64 notrace nomadik_read_sched_clock(void) { if (unlikely(!mtu_base)) return 0; @@ -80,6 +84,11 @@ static u32 notrace nomadik_read_sched_clock(void) } #endif +static unsigned long nmdk_timer_read_current_timer(void) +{ + return ~readl_relaxed(mtu_base + MTU_VAL(0)); +} + /* Clockevent device: use one-shot mode */ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) { @@ -93,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) return 0; } -void nmdk_clkevt_reset(void) +static void nmdk_clkevt_reset(void) { if (clkevt_periodic) { /* Timer: configure load and background-load, and fire it up */ @@ -134,12 +143,33 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } +static void nmdk_clksrc_reset(void) +{ + /* Disable */ + writel(0, mtu_base + MTU_CR(0)); + + /* ClockSource: configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(0)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); + + writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, + mtu_base + MTU_CR(0)); +} + +static void nmdk_clkevt_resume(struct clock_event_device *cedev) +{ + nmdk_clkevt_reset(); + nmdk_clksrc_reset(); +} + static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DYNIRQ, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, + .resume = nmdk_clkevt_resume, }; /* @@ -156,40 +186,20 @@ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = nmdk_timer_interrupt, .dev_id = &nmdk_clkevt, }; -void nmdk_clksrc_reset(void) -{ - /* Disable */ - writel(0, mtu_base + MTU_CR(0)); - - /* ClockSource: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - - writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(0)); -} - -void __init nmdk_timer_init(void __iomem *base, int irq) +static void __init nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; - struct clk *clk0, *pclk0; mtu_base = base; - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - BUG_ON(clk_prepare(pclk0) < 0); - BUG_ON(clk_enable(pclk0) < 0); - - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - BUG_ON(clk_prepare(clk0) < 0); - BUG_ON(clk_enable(clk0) < 0); + BUG_ON(clk_prepare_enable(pclk)); + BUG_ON(clk_prepare_enable(clk)); /* * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz @@ -199,7 +209,7 @@ void __init nmdk_timer_init(void __iomem *base, int irq) * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer * with 16 gives too low timer resolution. */ - rate = clk_get_rate(clk0); + rate = clk_get_rate(clk); if (rate > 32000000) { rate /= 16; clk_prescale = MTU_CRn_PRESCALE_16; @@ -219,12 +229,45 @@ void __init nmdk_timer_init(void __iomem *base, int irq) pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK - setup_sched_clock(nomadik_read_sched_clock, 32, rate); +#ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK + sched_clock_register(nomadik_read_sched_clock, 32, rate); #endif /* Timer 1 is used for events, register irq and clockevents */ setup_irq(irq, &nmdk_timer_irq); nmdk_clkevt.cpumask = cpumask_of(0); + nmdk_clkevt.irq = irq; clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); + + mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer; + mtu_delay_timer.freq = rate; + register_current_timer_delay(&mtu_delay_timer); +} + +static void __init nmdk_timer_of_init(struct device_node *node) +{ + struct clk *pclk; + struct clk *clk; + void __iomem *base; + int irq; + + base = of_iomap(node, 0); + if (!base) + panic("Can't remap registers"); + + pclk = of_clk_get_by_name(node, "apb_pclk"); + if (IS_ERR(pclk)) + panic("could not get apb_pclk"); + + clk = of_clk_get_by_name(node, "timclk"); + if (IS_ERR(clk)) + panic("could not get timclk"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + nmdk_timer_init(base, irq, pclk, clk); } +CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", + nmdk_timer_of_init); |