diff options
Diffstat (limited to 'drivers/clocksource/arm_global_timer.c')
| -rw-r--r-- | drivers/clocksource/arm_global_timer.c | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c new file mode 100644 index 00000000000..60e5a170c4d --- /dev/null +++ b/drivers/clocksource/arm_global_timer.c @@ -0,0 +1,323 @@ +/* + * drivers/clocksource/arm_global_timer.c + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Stuart Menefy <stuart.menefy@st.com> + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/cpu.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/sched_clock.h> + +#include <asm/cputype.h> + +#define GT_COUNTER0 0x00 +#define GT_COUNTER1 0x04 + +#define GT_CONTROL 0x08 +#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */ +#define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */ +#define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */ +#define GT_CONTROL_AUTO_INC BIT(3) /* banked */ + +#define GT_INT_STATUS 0x0c +#define GT_INT_STATUS_EVENT_FLAG BIT(0) + +#define GT_COMP0 0x10 +#define GT_COMP1 0x14 +#define GT_AUTO_INC 0x18 + +/* + * We are expecting to be clocked by the ARM peripheral clock. + * + * Note: it is assumed we are using a prescaler value of zero, so this is + * the units for all operations. + */ +static void __iomem *gt_base; +static unsigned long gt_clk_rate; +static int gt_ppi; +static struct clock_event_device __percpu *gt_evt; + +/* + * To get the value from the Global Timer Counter register proceed as follows: + * 1. Read the upper 32-bit timer counter register + * 2. Read the lower 32-bit timer counter register + * 3. Read the upper 32-bit timer counter register again. If the value is + * different to the 32-bit upper value read previously, go back to step 2. + * Otherwise the 64-bit timer counter value is correct. + */ +static u64 gt_counter_read(void) +{ + u64 counter; + u32 lower; + u32 upper, old_upper; + + upper = readl_relaxed(gt_base + GT_COUNTER1); + do { + old_upper = upper; + lower = readl_relaxed(gt_base + GT_COUNTER0); + upper = readl_relaxed(gt_base + GT_COUNTER1); + } while (upper != old_upper); + + counter = upper; + counter <<= 32; + counter |= lower; + return counter; +} + +/** + * To ensure that updates to comparator value register do not set the + * Interrupt Status Register proceed as follows: + * 1. Clear the Comp Enable bit in the Timer Control Register. + * 2. Write the lower 32-bit Comparator Value Register. + * 3. Write the upper 32-bit Comparator Value Register. + * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit. + */ +static void gt_compare_set(unsigned long delta, int periodic) +{ + u64 counter = gt_counter_read(); + unsigned long ctrl; + + counter += delta; + ctrl = GT_CONTROL_TIMER_ENABLE; + writel(ctrl, gt_base + GT_CONTROL); + writel(lower_32_bits(counter), gt_base + GT_COMP0); + writel(upper_32_bits(counter), gt_base + GT_COMP1); + + if (periodic) { + writel(delta, gt_base + GT_AUTO_INC); + ctrl |= GT_CONTROL_AUTO_INC; + } + + ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE; + writel(ctrl, gt_base + GT_CONTROL); +} + +static void gt_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl = readl(gt_base + GT_CONTROL); + ctrl &= ~(GT_CONTROL_COMP_ENABLE | + GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC); + writel(ctrl, gt_base + GT_CONTROL); + break; + default: + break; + } +} + +static int gt_clockevent_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + gt_compare_set(evt, 0); + return 0; +} + +static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + if (!(readl_relaxed(gt_base + GT_INT_STATUS) & + GT_INT_STATUS_EVENT_FLAG)) + return IRQ_NONE; + + /** + * ERRATA 740657( Global Timer can send 2 interrupts for + * the same event in single-shot mode) + * Workaround: + * Either disable single-shot mode. + * Or + * Modify the Interrupt Handler to avoid the + * offending sequence. This is achieved by clearing + * the Global Timer flag _after_ having incremented + * the Comparator register value to a higher value. + */ + if (evt->mode == CLOCK_EVT_MODE_ONESHOT) + gt_compare_set(ULONG_MAX, 0); + + writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int gt_clockevents_init(struct clock_event_device *clk) +{ + int cpu = smp_processor_id(); + + clk->name = "arm_global_timer"; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERCPU; + clk->set_mode = gt_clockevent_set_mode; + clk->set_next_event = gt_clockevent_set_next_event; + clk->cpumask = cpumask_of(cpu); + clk->rating = 300; + clk->irq = gt_ppi; + clockevents_config_and_register(clk, gt_clk_rate, + 1, 0xffffffff); + enable_percpu_irq(clk->irq, IRQ_TYPE_NONE); + return 0; +} + +static void gt_clockevents_stop(struct clock_event_device *clk) +{ + gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + disable_percpu_irq(clk->irq); +} + +static cycle_t gt_clocksource_read(struct clocksource *cs) +{ + return gt_counter_read(); +} + +static struct clocksource gt_clocksource = { + .name = "arm_global_timer", + .rating = 300, + .read = gt_clocksource_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK +static u64 notrace gt_sched_clock_read(void) +{ + return gt_counter_read(); +} +#endif + +static void __init gt_clocksource_init(void) +{ + writel(0, gt_base + GT_CONTROL); + writel(0, gt_base + GT_COUNTER0); + writel(0, gt_base + GT_COUNTER1); + /* enables timer on all the cores */ + writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); + +#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate); +#endif + clocksource_register_hz(>_clocksource, gt_clk_rate); +} + +static int gt_cpu_notify(struct notifier_block *self, unsigned long action, + void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + gt_clockevents_init(this_cpu_ptr(gt_evt)); + break; + case CPU_DYING: + gt_clockevents_stop(this_cpu_ptr(gt_evt)); + break; + } + + return NOTIFY_OK; +} +static struct notifier_block gt_cpu_nb = { + .notifier_call = gt_cpu_notify, +}; + +static void __init global_timer_of_register(struct device_node *np) +{ + struct clk *gt_clk; + int err = 0; + + /* + * In A9 r2p0 the comparators for each processor with the global timer + * fire when the timer value is greater than or equal to. In previous + * revisions the comparators fired when the timer value was equal to. + */ + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9 + && (read_cpuid_id() & 0xf0000f) < 0x200000) { + pr_warn("global-timer: non support for this cpu version.\n"); + return; + } + + gt_ppi = irq_of_parse_and_map(np, 0); + if (!gt_ppi) { + pr_warn("global-timer: unable to parse irq\n"); + return; + } + + gt_base = of_iomap(np, 0); + if (!gt_base) { + pr_warn("global-timer: invalid base address\n"); + return; + } + + gt_clk = of_clk_get(np, 0); + if (!IS_ERR(gt_clk)) { + err = clk_prepare_enable(gt_clk); + if (err) + goto out_unmap; + } else { + pr_warn("global-timer: clk not found\n"); + err = -EINVAL; + goto out_unmap; + } + + gt_clk_rate = clk_get_rate(gt_clk); + gt_evt = alloc_percpu(struct clock_event_device); + if (!gt_evt) { + pr_warn("global-timer: can't allocate memory\n"); + err = -ENOMEM; + goto out_clk; + } + + err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt, + "gt", gt_evt); + if (err) { + pr_warn("global-timer: can't register interrupt %d (%d)\n", + gt_ppi, err); + goto out_free; + } + + err = register_cpu_notifier(>_cpu_nb); + if (err) { + pr_warn("global-timer: unable to register cpu notifier.\n"); + goto out_irq; + } + + /* Immediately configure the timer on the boot CPU */ + gt_clocksource_init(); + gt_clockevents_init(this_cpu_ptr(gt_evt)); + + return; + +out_irq: + free_percpu_irq(gt_ppi, gt_evt); +out_free: + free_percpu(gt_evt); +out_clk: + clk_disable_unprepare(gt_clk); +out_unmap: + iounmap(gt_base); + WARN(err, "ARM Global timer register failed (%d)\n", err); +} + +/* Only tested on r2p2 and r3p0 */ +CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer", + global_timer_of_register); |