diff options
Diffstat (limited to 'drivers/char/synclinkmp.c')
| -rw-r--r-- | drivers/char/synclinkmp.c | 5601 |
1 files changed, 0 insertions, 5601 deletions
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c deleted file mode 100644 index 2f9eb4b0dec..00000000000 --- a/drivers/char/synclinkmp.c +++ /dev/null @@ -1,5601 +0,0 @@ -/* - * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ - * - * Device driver for Microgate SyncLink Multiport - * high speed multiprotocol serial adapter. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * Derived from serial.c written by Theodore Ts'o and Linus Torvalds - * This code is released under the GNU General Public License (GPL) - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_DEVICES 12 - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioctl.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <linux/termios.h> -#include <linux/workqueue.h> -#include <linux/hdlc.h> -#include <linux/synclink.h> - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include <asm/uaccess.h> - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -/* size in bytes of DMA data buffers */ -#define SCABUFSIZE 1024 -#define SCA_MEM_SIZE 0x40000 -#define SCA_BASE_SIZE 512 -#define SCA_REG_SIZE 16 -#define SCA_MAX_PORTS 4 -#define SCAMAXDESC 128 - -#define BUFFERLISTSIZE 4096 - -/* SCA-I style DMA buffer descriptor */ -typedef struct _SCADESC -{ - u16 next; /* lower l6 bits of next descriptor addr */ - u16 buf_ptr; /* lower 16 bits of buffer addr */ - u8 buf_base; /* upper 8 bits of buffer addr */ - u8 pad1; - u16 length; /* length of buffer */ - u8 status; /* status of buffer */ - u8 pad2; -} SCADESC, *PSCADESC; - -typedef struct _SCADESC_EX -{ - /* device driver bookkeeping section */ - char *virt_addr; /* virtual address of data buffer */ - u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ -} SCADESC_EX, *PSCADESC_EX; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* - * Device instance data structure - */ -typedef struct _synclinkmp_info { - void *if_ptr; /* General purpose pointer (used by SPPP) */ - int magic; - struct tty_port port; - int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - u16 read_status_mask1; /* break detection (SR1 indications) */ - u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ - unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char *tx_buf; - int tx_put; - int tx_get; - int tx_count; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct _synclinkmp_info *next_device; /* device list link */ - struct timer_list status_timer; /* input signal status check timer */ - - spinlock_t lock; /* spinlock for synchronizing with ISR */ - struct work_struct task; /* task structure for scheduling bh */ - - u32 max_frame_size; /* as set by device config */ - - u32 pending_bh; - - bool bh_running; /* Protection from multiple */ - int isr_overflow; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - unsigned long buffer_list_phys; - - unsigned int rx_buf_count; /* count of total allocated Rx buffers */ - SCADESC *rx_buf_list; /* list of receive buffer entries */ - SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ - unsigned int current_rx_buf; - - unsigned int tx_buf_count; /* count of total allocated Tx buffers */ - SCADESC *tx_buf_list; /* list of transmit buffer entries */ - SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ - unsigned int last_tx_buf; - - unsigned char *tmp_rx_buf; - unsigned int tmp_rx_buf_count; - - bool rx_enabled; - bool rx_overflow; - - bool tx_enabled; - bool tx_active; - u32 idle_mode; - - unsigned char ie0_value; - unsigned char ie1_value; - unsigned char ie2_value; - unsigned char ctrlreg_value; - unsigned char old_signals; - - char device_name[25]; /* device instance name */ - - int port_count; - int adapter_num; - int port_num; - - struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; - - unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ - - unsigned int irq_level; /* interrupt level */ - unsigned long irq_flags; - bool irq_requested; /* true if IRQ requested */ - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - unsigned int init_error; /* Initialization startup error */ - - u32 last_mem_alloc; - unsigned char* memory_base; /* shared memory address (PCI only) */ - u32 phys_memory_base; - int shared_mem_requested; - - unsigned char* sca_base; /* HD64570 SCA Memory address */ - u32 phys_sca_base; - u32 sca_offset; - bool sca_base_requested; - - unsigned char* lcr_base; /* local config registers (PCI only) */ - u32 phys_lcr_base; - u32 lcr_offset; - int lcr_mem_requested; - - unsigned char* statctrl_base; /* status/control register memory */ - u32 phys_statctrl_base; - u32 statctrl_offset; - bool sca_statctrl_requested; - - u32 misc_ctrl_value; - char flag_buf[MAX_ASYNC_BUFFER_SIZE]; - char char_buf[MAX_ASYNC_BUFFER_SIZE]; - bool drop_rts_on_tx_done; - - struct _input_signal_events input_signal_events; - - /* SPPP/Cisco HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -} SLMP_INFO; - -#define MGSL_MAGIC 0x5401 - -/* - * define serial signal status change macros - */ -#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ -#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ -#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ -#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ - -/* Common Register macros */ -#define LPR 0x00 -#define PABR0 0x02 -#define PABR1 0x03 -#define WCRL 0x04 -#define WCRM 0x05 -#define WCRH 0x06 -#define DPCR 0x08 -#define DMER 0x09 -#define ISR0 0x10 -#define ISR1 0x11 -#define ISR2 0x12 -#define IER0 0x14 -#define IER1 0x15 -#define IER2 0x16 -#define ITCR 0x18 -#define INTVR 0x1a -#define IMVR 0x1c - -/* MSCI Register macros */ -#define TRB 0x20 -#define TRBL 0x20 -#define TRBH 0x21 -#define SR0 0x22 -#define SR1 0x23 -#define SR2 0x24 -#define SR3 0x25 -#define FST 0x26 -#define IE0 0x28 -#define IE1 0x29 -#define IE2 0x2a -#define FIE 0x2b -#define CMD 0x2c -#define MD0 0x2e -#define MD1 0x2f -#define MD2 0x30 -#define CTL 0x31 -#define SA0 0x32 -#define SA1 0x33 -#define IDL 0x34 -#define TMC 0x35 -#define RXS 0x36 -#define TXS 0x37 -#define TRC0 0x38 -#define TRC1 0x39 -#define RRC 0x3a -#define CST0 0x3c -#define CST1 0x3d - -/* Timer Register Macros */ -#define TCNT 0x60 -#define TCNTL 0x60 -#define TCNTH 0x61 -#define TCONR 0x62 -#define TCONRL 0x62 -#define TCONRH 0x63 -#define TMCS 0x64 -#define TEPR 0x65 - -/* DMA Controller Register macros */ -#define DARL 0x80 -#define DARH 0x81 -#define DARB 0x82 -#define BAR 0x80 -#define BARL 0x80 -#define BARH 0x81 -#define BARB 0x82 -#define SAR 0x84 -#define SARL 0x84 -#define SARH 0x85 -#define SARB 0x86 -#define CPB 0x86 -#define CDA 0x88 -#define CDAL 0x88 -#define CDAH 0x89 -#define EDA 0x8a -#define EDAL 0x8a -#define EDAH 0x8b -#define BFL 0x8c -#define BFLL 0x8c -#define BFLH 0x8d -#define BCR 0x8e -#define BCRL 0x8e -#define BCRH 0x8f -#define DSR 0x90 -#define DMR 0x91 -#define FCT 0x93 -#define DIR 0x94 -#define DCMD 0x95 - -/* combine with timer or DMA register address */ -#define TIMER0 0x00 -#define TIMER1 0x08 -#define TIMER2 0x10 -#define TIMER3 0x18 -#define RXDMA 0x00 -#define TXDMA 0x20 - -/* SCA Command Codes */ -#define NOOP 0x00 -#define TXRESET 0x01 -#define TXENABLE 0x02 -#define TXDISABLE 0x03 -#define TXCRCINIT 0x04 -#define TXCRCEXCL 0x05 -#define TXEOM 0x06 -#define TXABORT 0x07 -#define MPON 0x08 -#define TXBUFCLR 0x09 -#define RXRESET 0x11 -#define RXENABLE 0x12 -#define RXDISABLE 0x13 -#define RXCRCINIT 0x14 -#define RXREJECT 0x15 -#define SEARCHMP 0x16 -#define RXCRCEXCL 0x17 -#define RXCRCCALC 0x18 -#define CHRESET 0x21 -#define HUNT 0x31 - -/* DMA command codes */ -#define SWABORT 0x01 -#define FEICLEAR 0x02 - -/* IE0 */ -#define TXINTE BIT7 -#define RXINTE BIT6 -#define TXRDYE BIT1 -#define RXRDYE BIT0 - -/* IE1 & SR1 */ -#define UDRN BIT7 -#define IDLE BIT6 -#define SYNCD BIT4 -#define FLGD BIT4 -#define CCTS BIT3 -#define CDCD BIT2 -#define BRKD BIT1 -#define ABTD BIT1 -#define GAPD BIT1 -#define BRKE BIT0 -#define IDLD BIT0 - -/* IE2 & SR2 */ -#define EOM BIT7 -#define PMP BIT6 -#define SHRT BIT6 -#define PE BIT5 -#define ABT BIT5 -#define FRME BIT4 -#define RBIT BIT4 -#define OVRN BIT3 -#define CRCE BIT2 - - -/* - * Global linked list of SyncLink devices - */ -static SLMP_INFO *synclinkmp_device_list = NULL; -static int synclinkmp_adapter_count = -1; -static int synclinkmp_device_count = 0; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static int break_on_load = 0; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor = 0; - -/* - * Array of user specified options for ISA adapters. - */ -static int debug_level = 0; -static int maxframe[MAX_DEVICES] = {0,}; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -static char *driver_name = "SyncLink MultiPort driver"; -static char *driver_version = "$Revision: 4.38 $"; - -static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); -static void synclinkmp_remove_one(struct pci_dev *dev); - -static struct pci_device_id synclinkmp_pci_tbl[] = { - { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); - -MODULE_LICENSE("GPL"); - -static struct pci_driver synclinkmp_pci_driver = { - .name = "synclinkmp", - .id_table = synclinkmp_pci_tbl, - .probe = synclinkmp_init_one, - .remove = __devexit_p(synclinkmp_remove_one), -}; - - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - - -/* tty callbacks */ - -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); -static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); -static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); -static void tx_release(struct tty_struct *tty); - -static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(SLMP_INFO *info); -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); -static int hdlcdev_init(SLMP_INFO *info); -static void hdlcdev_exit(SLMP_INFO *info); -#endif - -/* ioctl handlers */ - -static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); -static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int get_txidle(SLMP_INFO *info, int __user *idle_mode); -static int set_txidle(SLMP_INFO *info, int idle_mode); -static int tx_enable(SLMP_INFO *info, int enable); -static int tx_abort(SLMP_INFO *info); -static int rx_enable(SLMP_INFO *info, int enable); -static int modem_input_wait(SLMP_INFO *info,int arg); -static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty, struct file *file); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); - -static void add_device(SLMP_INFO *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(SLMP_INFO *info); -static void release_resources(SLMP_INFO *info); - -static int startup(SLMP_INFO *info); -static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); -static int carrier_raised(struct tty_port *port); -static void shutdown(SLMP_INFO *info); -static void program_hw(SLMP_INFO *info); -static void change_params(SLMP_INFO *info); - -static bool init_adapter(SLMP_INFO *info); -static bool register_test(SLMP_INFO *info); -static bool irq_test(SLMP_INFO *info); -static bool loopback_test(SLMP_INFO *info); -static int adapter_test(SLMP_INFO *info); -static bool memory_test(SLMP_INFO *info); - -static void reset_adapter(SLMP_INFO *info); -static void reset_port(SLMP_INFO *info); -static void async_mode(SLMP_INFO *info); -static void hdlc_mode(SLMP_INFO *info); - -static void rx_stop(SLMP_INFO *info); -static void rx_start(SLMP_INFO *info); -static void rx_reset_buffers(SLMP_INFO *info); -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); -static bool rx_get_frame(SLMP_INFO *info); - -static void tx_start(SLMP_INFO *info); -static void tx_stop(SLMP_INFO *info); -static void tx_load_fifo(SLMP_INFO *info); -static void tx_set_idle(SLMP_INFO *info); -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); - -static void get_signals(SLMP_INFO *info); -static void set_signals(SLMP_INFO *info); -static void enable_loopback(SLMP_INFO *info, int enable); -static void set_rate(SLMP_INFO *info, u32 data_rate); - -static int bh_action(SLMP_INFO *info); -static void bh_handler(struct work_struct *work); -static void bh_receive(SLMP_INFO *info); -static void bh_transmit(SLMP_INFO *info); -static void bh_status(SLMP_INFO *info); -static void isr_timer(SLMP_INFO *info); -static void isr_rxint(SLMP_INFO *info); -static void isr_rxrdy(SLMP_INFO *info); -static void isr_txint(SLMP_INFO *info); -static void isr_txrdy(SLMP_INFO *info); -static void isr_rxdmaok(SLMP_INFO *info); -static void isr_rxdmaerror(SLMP_INFO *info); -static void isr_txdmaok(SLMP_INFO *info); -static void isr_txdmaerror(SLMP_INFO *info); -static void isr_io_pin(SLMP_INFO *info, u16 status); - -static int alloc_dma_bufs(SLMP_INFO *info); -static void free_dma_bufs(SLMP_INFO *info); -static int alloc_buf_list(SLMP_INFO *info); -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); -static int alloc_tmp_rx_buf(SLMP_INFO *info); -static void free_tmp_rx_buf(SLMP_INFO *info); - -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); -static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); -static void tx_timeout(unsigned long context); -static void status_timeout(unsigned long context); - -static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); -static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); -static u16 read_reg16(SLMP_INFO *info, unsigned char addr); -static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); -static unsigned char read_status_reg(SLMP_INFO * info); -static void write_control_reg(SLMP_INFO * info); - - -static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes -static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes -static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes - -static u32 misc_ctrl_value = 0x007e4040; -static u32 lcr1_brdr_value = 0x00800028; - -static u32 read_ahead_count = 8; - -/* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 1=release after 1 xfer on all channels - * 03 CCC, channel change condition: 0=every cycle - * 1=after each channel completes all xfers - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x00 - */ -static unsigned char dma_priority = 0x04; - -// Number of bytes that can be written to shared RAM -// in a single write operation -static u32 sca_pci_load_interval = 64; - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* synclinkmp_get_text_ptr(void); -static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} - -static inline int sanity_check(SLMP_INFO *info, - char *name, const char *routine) -{ -#ifdef SANITY_CHECK - static const char *badmagic = - "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null synclinkmp_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/** - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* tty callbacks */ - -/* Called when a port is opened. Init and enable port. - */ -static int open(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= synclinkmp_device_count)) { - printk("%s(%d): open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - info = synclinkmp_device_list; - while(info && info->line != line) - info = info->next_device; - if (sanity_check(info, tty->name, "open")) - return -ENODEV; - if ( info->init_error ) { - printk("%s(%d):%s device is not allocated, init error=%d\n", - __FILE__,__LINE__,info->device_name,info->init_error); - return -ENODEV; - } - - tty->driver_data = info; - info->port.tty = tty; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open(), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->port.count); - - /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) - goto cleanup; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() returned %d\n", - __FILE__,__LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open() success\n", - __FILE__,__LINE__, info->device_name); - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - return retval; -} - -/* Called when port is closed. Wait for remaining data to be - * sent. Disable port and free resources. - */ -static void close(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO * info = tty->driver_data; - - if (sanity_check(info, tty->name, "close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (info->port.flags & ASYNC_INITIALIZED) - wait_until_sent(tty, info->timeout); - - flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->port.count); -} - -/* Called by tty_hangup() when a hangup is signaled. - * This is the same as closing all open descriptors for the port. - */ -static void hangup(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s hangup()\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "hangup")) - return; - - mutex_lock(&info->port.mutex); - flush_buffer(tty); - shutdown(info); - - spin_lock_irqsave(&info->port.lock, flags); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - spin_unlock_irqrestore(&info->port.lock, flags); - mutex_unlock(&info->port.mutex); - - wake_up_interruptible(&info->port.open_wait); -} - -/* Set new termios settings - */ -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, - tty->driver->name ); - - change_params(info); - - /* Handle transition to B0 status */ - if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { - info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->serial_signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - tx_release(tty); - } -} - -/* Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Return Value: number of characters written - */ -static int write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write() count=%d\n", - __FILE__,__LINE__,info->device_name,count); - - if (sanity_check(info, tty->name, "write")) - goto cleanup; - - if (!info->tx_buf) - goto cleanup; - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count > info->max_frame_size) { - ret = -EIO; - goto cleanup; - } - if (info->tx_active) - goto cleanup; - if (info->tx_count) { - /* send accumulated data from send_char() calls */ - /* as frame and wait before accepting more data. */ - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - goto start; - } - ret = info->tx_count = count; - tx_load_dma_buffer(info, buf, count); - goto start; - } - - for (;;) { - c = min_t(int, count, - min(info->max_frame_size - info->tx_count - 1, - info->max_frame_size - info->tx_put)); - if (c <= 0) - break; - - memcpy(info->tx_buf + info->tx_put, buf, c); - - spin_lock_irqsave(&info->lock,flags); - info->tx_put += c; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count += c; - spin_unlock_irqrestore(&info->lock,flags); - - buf += c; - count -= c; - ret += c; - } - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count) { - ret = info->tx_count = 0; - goto cleanup; - } - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - } -start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):%s write() returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); - return ret; -} - -/* Add a character to the transmit buffer. - */ -static int put_char(struct tty_struct *tty, unsigned char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if ( debug_level >= DEBUG_LEVEL_INFO ) { - printk( "%s(%d):%s put_char(%d)\n", - __FILE__,__LINE__,info->device_name,ch); - } - - if (sanity_check(info, tty->name, "put_char")) - return 0; - - if (!info->tx_buf) - return 0; - - spin_lock_irqsave(&info->lock,flags); - - if ( (info->params.mode != MGSL_MODE_HDLC) || - !info->tx_active ) { - - if (info->tx_count < info->max_frame_size - 1) { - info->tx_buf[info->tx_put++] = ch; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count++; - ret = 1; - } - } - - spin_unlock_irqrestore(&info->lock,flags); - return ret; -} - -/* Send a high-priority XON/XOFF character - */ -static void send_xchar(struct tty_struct *tty, char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s send_xchar(%d)\n", - __FILE__,__LINE__, info->device_name, ch ); - - if (sanity_check(info, tty->name, "send_xchar")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Wait until the transmitter is empty. - */ -static void wait_until_sent(struct tty_struct *tty, int timeout) -{ - SLMP_INFO * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "wait_until_sent")) - return; - - if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - /* - * TODO: determine if there is something similar to USC16C32 - * TXSTATUS_ALL_SENT status - */ - while ( info->tx_active && info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() exit\n", - __FILE__,__LINE__, info->device_name ); -} - -/* Return the count of free bytes in transmit buffer - */ -static int write_room(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - int ret; - - if (sanity_check(info, tty->name, "write_room")) - return 0; - - if (info->params.mode == MGSL_MODE_HDLC) { - ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - } else { - ret = info->max_frame_size - info->tx_count - 1; - if (ret < 0) - ret = 0; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write_room()=%d\n", - __FILE__, __LINE__, info->device_name, ret); - - return ret; -} - -/* enable transmitter and send remaining buffered characters - */ -static void flush_chars(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (sanity_check(info, tty->name, "flush_chars")) - return; - - if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || - !info->tx_buf) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - - if (!info->tx_active) { - if ( (info->params.mode == MGSL_MODE_HDLC) && - info->tx_count ) { - /* operating in synchronous (frame oriented) mode */ - /* copy data from circular tx_buf to */ - /* transmit DMA buffer. */ - tx_load_dma_buffer(info, - info->tx_buf,info->tx_count); - } - tx_start(info); - } - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Discard all data in the send buffer - */ -static void flush_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s flush_buffer() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "flush_buffer")) - return; - - spin_lock_irqsave(&info->lock,flags); - info->tx_count = info->tx_put = info->tx_get = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->lock,flags); - - tty_wakeup(tty); -} - -/* throttle (stop) transmitter - */ -static void tx_hold(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_hold")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_hold()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (info->tx_enabled) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* release (start) transmitter - */ -static void tx_release(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_release")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_release()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * file pointer to associated file object for device - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - SLMP_INFO *info = tty->driver_data; - void __user *argp = (void __user *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); - - if (sanity_check(info, tty->name, "ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCGPARAMS: - return get_params(info, argp); - case MGSL_IOCSPARAMS: - return set_params(info, argp); - case MGSL_IOCGTXIDLE: - return get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return set_txidle(info, (int)arg); - case MGSL_IOCTXENABLE: - return tx_enable(info, (int)arg); - case MGSL_IOCRXENABLE: - return rx_enable(info, (int)arg); - case MGSL_IOCTXABORT: - return tx_abort(info); - case MGSL_IOCGSTATS: - return get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return wait_mgsl_event(info, argp); - case MGSL_IOCLOOPTXDONE: - return 0; // TODO: Not supported, need to document - /* Wait for modem input (DCD,RI,DSR,CTS) change - * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) - */ - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - SLMP_INFO *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, SLMP_INFO *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" - "\tIRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC) { - seq_printf(m, "\tHDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxlong:%d", info->icount.rxcrc); - } else { - seq_printf(m, "\tASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int synclinkmp_proc_show(struct seq_file *m, void *v) -{ - SLMP_INFO *info; - - seq_printf(m, "synclinkmp driver:%s\n", driver_version); - - info = synclinkmp_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int synclinkmp_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, synclinkmp_proc_show, NULL); -} - -static const struct file_operations synclinkmp_proc_fops = { - .owner = THIS_MODULE, - .open = synclinkmp_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* Return the count of bytes in transmit buffer - */ -static int chars_in_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - - if (sanity_check(info, tty->name, "chars_in_buffer")) - return 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s chars_in_buffer()=%d\n", - __FILE__, __LINE__, info->device_name, info->tx_count); - - return info->tx_count; -} - -/* Signal remote device to throttle send data (our receive data) - */ -static void throttle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s throttle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "throttle")) - return; - - if (I_IXOFF(tty)) - send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Signal remote device to stop throttling send data (our receive data) - */ -static void unthrottle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s unthrottle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* set or clear transmit break condition - * break_state -1=set break condition, 0=clear - */ -static int set_break(struct tty_struct *tty, int break_state) -{ - unsigned char RegValue; - SLMP_INFO * info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_break(%d)\n", - __FILE__,__LINE__, info->device_name, break_state); - - if (sanity_check(info, tty->name, "set_break")) - return -EINVAL; - - spin_lock_irqsave(&info->lock,flags); - RegValue = read_reg(info, CTL); - if (break_state == -1) - RegValue |= BIT3; - else - RegValue &= ~BIT3; - write_reg(info, CTL, RegValue); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - - return 0; -} - -/** - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - info->tx_count = skb->len; - tx_load_dma_buffer(info, skb->data, skb->len); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - dev->trans_start = jiffies; - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - return NETDEV_TX_OK; -} - -/** - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); - - /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert DTR and RTS, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - program_hw(info); - - /* enable network layer transmit */ - dev->trans_start = jiffies; - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/** - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifr pointer to network interface request structure - * cmd IOCTL command code - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - SLMP_INFO *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - - netif_wake_queue(dev); -} - -/** - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(SLMP_INFO *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n",dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - - memcpy(skb_put(skb, size), buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(SLMP_INFO *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->mem_start = info->phys_sca_base; - dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(SLMP_INFO *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - - -/* Return next bottom half action to perform. - * Return Value: BH action code or 0 if nothing to do. - */ -static int bh_action(SLMP_INFO *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->lock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -/* Perform bottom half processing of work items queued by ISR. - */ -static void bh_handler(struct work_struct *work) -{ - SLMP_INFO *info = container_of(work, SLMP_INFO, task); - int action; - - if (!info) - return; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - - while((action = bh_action(info)) != 0) { - - /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() work item action=%d\n", - __FILE__,__LINE__,info->device_name, action); - - switch (action) { - - case BH_RECEIVE: - bh_receive(info); - break; - case BH_TRANSMIT: - bh_transmit(info); - break; - case BH_STATUS: - bh_status(info); - break; - default: - /* unknown work item ID */ - printk("%s(%d):%s Unknown work item ID=%08X!\n", - __FILE__,__LINE__,info->device_name,action); - break; - } - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void bh_receive(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_receive()\n", - __FILE__,__LINE__,info->device_name); - - while( rx_get_frame(info) ); -} - -static void bh_transmit(SLMP_INFO *info) -{ - struct tty_struct *tty = info->port.tty; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_transmit() entry\n", - __FILE__,__LINE__,info->device_name); - - if (tty) - tty_wakeup(tty); -} - -static void bh_status(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_status() entry\n", - __FILE__,__LINE__,info->device_name); - - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -static void isr_timer(SLMP_INFO * info) -{ - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ - write_reg(info, IER2, 0); - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 0=disabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0000 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0); - - info->irq_occurred = true; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_timer()\n", - __FILE__,__LINE__,info->device_name); -} - -static void isr_rxint(SLMP_INFO * info) -{ - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); - unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; - - /* clear status bits */ - if (status) - write_reg(info, SR1, status); - - if (status2) - write_reg(info, SR2, status2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxint status=%02X %02x\n", - __FILE__,__LINE__,info->device_name,status,status2); - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (status & BRKD) { - icount->brk++; - - /* process break detection if tty control - * is not set to ignore it - */ - if ( tty ) { - if (!(status & info->ignore_status_mask1)) { - if (info->read_status_mask1 & BRKD) { - tty_insert_flip_char(tty, 0, TTY_BREAK); - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } - } - } - } - } - else { - if (status & (FLGD|IDLD)) { - if (status & FLGD) - info->icount.exithunt++; - else if (status & IDLD) - info->icount.rxidle++; - wake_up_interruptible(&info->event_wait_q); - } - } - - if (status & CDCD) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); - } -} - -/* - * handle async rx data interrupts - */ -static void isr_rxrdy(SLMP_INFO * info) -{ - u16 status; - unsigned char DataByte; - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxrdy\n", - __FILE__,__LINE__,info->device_name); - - while((status = read_reg(info,CST0)) & BIT0) - { - int flag = 0; - bool over = false; - DataByte = read_reg(info,TRB); - - icount->rx++; - - if ( status & (PE + FRME + OVRN) ) { - printk("%s(%d):%s rxerr=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - /* update error statistics */ - if (status & PE) - icount->parity++; - else if (status & FRME) - icount->frame++; - else if (status & OVRN) - icount->overrun++; - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask2) - continue; - - status &= info->read_status_mask2; - - if ( tty ) { - if (status & PE) - flag = TTY_PARITY; - else if (status & FRME) - flag = TTY_FRAME; - if (status & OVRN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - over = true; - } - } - } /* end of if (error) */ - - if ( tty ) { - tty_insert_flip_char(tty, DataByte, flag); - if (over) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - } - - if ( debug_level >= DEBUG_LEVEL_ISR ) { - printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,info->device_name, - icount->rx,icount->brk,icount->parity, - icount->frame,icount->overrun); - } - - if ( tty ) - tty_flip_buffer_push(tty); -} - -static void isr_txeom(SLMP_INFO * info, unsigned char status) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txeom status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if (status & UDRN) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - } else - write_reg(info, CMD, TXBUFCLR); - - /* disable and clear tx interrupts */ - info->ie0_value &= ~TXRDYE; - info->ie1_value &= ~(IDLE + UDRN); - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); - - if ( info->tx_active ) { - if (info->params.mode != MGSL_MODE_ASYNC) { - if (status & UDRN) - info->icount.txunder++; - else if (status & IDLE) - info->icount.txok++; - } - - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - del_timer(&info->tx_timer); - - if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { - info->serial_signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = false; - set_signals(info); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - } -} - - -/* - * handle tx status interrupts - */ -static void isr_txint(SLMP_INFO * info) -{ - unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); - - /* clear status bits */ - write_reg(info, SR1, status); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txint status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - if (status & (UDRN + IDLE)) - isr_txeom(info, status); - - if (status & CCTS) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); - - } -} - -/* - * handle async tx data interrupts - */ -static void isr_txrdy(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txrdy() tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* disable TXRDY IRQ, enable IDLE IRQ */ - info->ie0_value &= ~TXRDYE; - info->ie1_value |= IDLE; - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - return; - } - - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - - if ( info->tx_count ) - tx_load_fifo( info ); - else { - info->tx_active = false; - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - if (info->tx_count < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; -} - -static void isr_rxdmaok(SLMP_INFO * info) -{ - /* BIT7 = EOT (end of transfer) - * BIT6 = EOM (end of message/frame) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->pending_bh |= BH_RECEIVE; -} - -static void isr_rxdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->rx_overflow = true; - info->pending_bh |= BH_RECEIVE; -} - -static void isr_txdmaok(SLMP_INFO * info) -{ - unsigned char status_reg1 = read_reg(info, SR1); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status_reg1); - - /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ - write_reg16(info, TRC0, 0); - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); -} - -static void isr_txdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); -} - -/* handle input serial signal changes - */ -static void isr_io_pin( SLMP_INFO *info, u16 status ) -{ - struct mgsl_icount *icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):isr_io_pin status=%04X\n", - __FILE__,__LINE__,status); - - if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | - MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { - icount = &info->icount; - /* update input line counters */ - if (status & MISCSTATUS_RI_LATCHED) { - icount->rng++; - if ( status & SerialSignal_RI ) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - } - if (status & MISCSTATUS_DSR_LATCHED) { - icount->dsr++; - if ( status & SerialSignal_DSR ) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - } - if (status & MISCSTATUS_DCD_LATCHED) { - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CDCD; - write_reg(info, IE1, info->ie1_value); - } - icount->dcd++; - if (status & SerialSignal_DCD) { - info->input_signal_events.dcd_up++; - } else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (status & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - } - if (status & MISCSTATUS_CTS_LATCHED) - { - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CCTS; - write_reg(info, IE1, info->ie1_value); - } - icount->cts++; - if ( status & SerialSignal_CTS ) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - } - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if ( (info->port.flags & ASYNC_CHECK_CD) && - (status & MISCSTATUS_DCD_LATCHED) ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s CD now %s...", info->device_name, - (status & SerialSignal_DCD) ? "on" : "off"); - if (status & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("doing serial hangup..."); - if (info->port.tty) - tty_hangup(info->port.tty); - } - } - - if ( (info->port.flags & ASYNC_CTS_FLOW) && - (status & MISCSTATUS_CTS_LATCHED) ) { - if ( info->port.tty ) { - if (info->port.tty->hw_stopped) { - if (status & SerialSignal_CTS) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; - tx_start(info); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(status & SerialSignal_CTS)) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; - tx_stop(info); - } - } - } - } - } - - info->pending_bh |= BH_STATUS; -} - -/* Interrupt service routine entry point. - * - * Arguments: - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - * regs interrupted processor context - */ -static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) -{ - SLMP_INFO *info = dev_id; - unsigned char status, status0, status1=0; - unsigned char dmastatus, dmastatus0, dmastatus1=0; - unsigned char timerstatus0, timerstatus1=0; - unsigned char shift; - unsigned int i; - unsigned short tmp; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", - __FILE__, __LINE__, info->irq_level); - - spin_lock(&info->lock); - - for(;;) { - - /* get status for SCA0 (ports 0-1) */ - tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ - status0 = (unsigned char)tmp; - dmastatus0 = (unsigned char)(tmp>>8); - timerstatus0 = read_reg(info, ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", - __FILE__, __LINE__, info->device_name, - status0, dmastatus0, timerstatus0); - - if (info->port_count == 4) { - /* get status for SCA1 (ports 2-3) */ - tmp = read_reg16(info->port_array[2], ISR0); - status1 = (unsigned char)tmp; - dmastatus1 = (unsigned char)(tmp>>8); - timerstatus1 = read_reg(info->port_array[2], ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", - __FILE__,__LINE__,info->device_name, - status1,dmastatus1,timerstatus1); - } - - if (!status0 && !dmastatus0 && !timerstatus0 && - !status1 && !dmastatus1 && !timerstatus1) - break; - - for(i=0; i < info->port_count ; i++) { - if (info->port_array[i] == NULL) - continue; - if (i < 2) { - status = status0; - dmastatus = dmastatus0; - } else { - status = status1; - dmastatus = dmastatus1; - } - - shift = i & 1 ? 4 :0; - - if (status & BIT0 << shift) - isr_rxrdy(info->port_array[i]); - if (status & BIT1 << shift) - isr_txrdy(info->port_array[i]); - if (status & BIT2 << shift) - isr_rxint(info->port_array[i]); - if (status & BIT3 << shift) - isr_txint(info->port_array[i]); - - if (dmastatus & BIT0 << shift) - isr_rxdmaerror(info->port_array[i]); - if (dmastatus & BIT1 << shift) - isr_rxdmaok(info->port_array[i]); - if (dmastatus & BIT2 << shift) - isr_txdmaerror(info->port_array[i]); - if (dmastatus & BIT3 << shift) - isr_txdmaok(info->port_array[i]); - } - - if (timerstatus0 & (BIT5 | BIT4)) - isr_timer(info->port_array[0]); - if (timerstatus0 & (BIT7 | BIT6)) - isr_timer(info->port_array[1]); - if (timerstatus1 & (BIT5 | BIT4)) - isr_timer(info->port_array[2]); - if (timerstatus1 & (BIT7 | BIT6)) - isr_timer(info->port_array[3]); - } - - for(i=0; i < info->port_count ; i++) { - SLMP_INFO * port = info->port_array[i]; - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running. - * - * Note: startup adapter diags require interrupts. - * do not request bottom half processing if the - * device is not open in a normal mode. - */ - if ( port && (port->port.count || port->netcount) && - port->pending_bh && !port->bh_running && - !port->bh_requested ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,port->device_name); - schedule_work(&port->task); - port->bh_requested = true; - } - } - - spin_unlock(&info->lock); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - return IRQ_HANDLED; -} - -/* Initialize and start device. - */ -static int startup(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); - - if (info->port.flags & ASYNC_INITIALIZED) - return 0; - - if (!info->tx_buf) { - info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (!info->tx_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - /* program hardware for current parameters */ - reset_port(info); - - change_params(info); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags |= ASYNC_INITIALIZED; - - return 0; -} - -/* Called by close() and hangup() to shutdown hardware - */ -static void shutdown(SLMP_INFO * info) -{ - unsigned long flags; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s synclinkmp_shutdown()\n", - __FILE__,__LINE__, info->device_name ); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer(&info->tx_timer); - del_timer(&info->status_timer); - - kfree(info->tx_buf); - info->tx_buf = NULL; - - spin_lock_irqsave(&info->lock,flags); - - reset_port(info); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { - info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - } - - spin_unlock_irqrestore(&info->lock,flags); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; -} - -static void program_hw(SLMP_INFO *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - - rx_stop(info); - tx_stop(info); - - info->tx_count = info->tx_put = info->tx_get = 0; - - if (info->params.mode == MGSL_MODE_HDLC || info->netcount) - hdlc_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - info->ie1_value |= (CDCD|CCTS); - write_reg(info, IE1, info->ie1_value); - - get_signals(info); - - if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) ) - rx_start(info); - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void change_params(SLMP_INFO *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty || !info->port.tty->termios) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s change_params()\n", - __FILE__,__LINE__, info->device_name ); - - cflag = info->port.tty->termios->c_cflag; - - /* if B0 rate (hangup) specified then negate DTR and RTS */ - /* otherwise assert DTR and RTS */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: info->params.data_bits = 7; break; - } - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; -#endif - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->port.tty); - } - - if ( info->params.data_rate ) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->port.flags |= ASYNC_CTS_FLOW; - else - info->port.flags &= ~ASYNC_CTS_FLOW; - - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* process tty input control flags */ - - info->read_status_mask2 = OVRN; - if (I_INPCK(info->port.tty)) - info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= PE | FRME; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask1 |= BRKD; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= OVRN; - } - - program_hw(info); -} - -static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - mutex_lock(&info->port.mutex); - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - mutex_unlock(&info->port.mutex); - if (err) - return -EFAULT; - } - - return 0; -} - -static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - mutex_lock(&info->port.mutex); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - mutex_unlock(&info->port.mutex); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_params\n", - __FILE__,__LINE__,info->device_name ); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s set_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - mutex_lock(&info->port.mutex); - spin_lock_irqsave(&info->lock,flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock,flags); - - change_params(info); - mutex_unlock(&info->port.mutex); - - return 0; -} - -static int get_txidle(SLMP_INFO * info, int __user *idle_mode) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_txidle()=%d\n", - __FILE__,__LINE__, info->device_name, info->idle_mode); - - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_txidle() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_txidle(SLMP_INFO * info, int idle_mode) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_txidle(%d)\n", - __FILE__,__LINE__,info->device_name, idle_mode ); - - spin_lock_irqsave(&info->lock,flags); - info->idle_mode = idle_mode; - tx_set_idle( info ); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int tx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_enable(%d)\n", - __FILE__,__LINE__,info->device_name, enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->tx_enabled ) { - tx_start(info); - } - } else { - if ( info->tx_enabled ) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* abort send HDLC frame - */ -static int tx_abort(SLMP_INFO * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_abort()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { - info->ie1_value &= ~UDRN; - info->ie1_value |= IDLE; - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXABORT); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int rx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s rx_enable(%d)\n", - __FILE__,__LINE__,info->device_name,enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->rx_enabled ) - rx_start(info); - } else { - if ( info->rx_enabled ) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* wait for specified event to occur - */ -static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) { - return -EFAULT; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_mgsl_event(%d)\n", - __FILE__,__LINE__,info->device_name,mask); - - spin_lock_irqsave(&info->lock,flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->serial_signals; - - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { - unsigned char oldval = info->ie1_value; - unsigned char newval = oldval + - (mask & MgslEvent_ExitHuntMode ? FLGD:0) + - (mask & MgslEvent_IdleReceived ? IDLD:0); - if ( oldval != newval ) { - info->ie1_value = newval; - write_reg(info, IE1, info->ie1_value); - } - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->lock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - info->ie1_value &= ~(FLGD|IDLD); - write_reg(info, IE1, info->ie1_value); - } - spin_unlock_irqrestore(&info->lock,flags); - } -exit: - if ( rc == 0 ) - PUT_USER(rc, events, mask_ptr); - - return rc; -} - -static int modem_input_wait(SLMP_INFO *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty, struct file *file) -{ - SLMP_INFO *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return 0; -} - -static int carrier_raised(struct tty_port *port) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - if (on) - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Block the current process until the specified port is ready to open. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - SLMP_INFO *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready()\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - port->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - port->blocked_open++; - - while (1) { - if (tty->termios->c_cflag & CBAUD) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - if (extra_count) - port->count++; - port->blocked_open--; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - if (!retval) - port->flags |= ASYNC_NORMAL_ACTIVE; - - return retval; -} - -static int alloc_dma_bufs(SLMP_INFO *info) -{ - unsigned short BuffersPerFrame; - unsigned short BufferCount; - - // Force allocation to start at 64K boundary for each port. - // This is necessary because *all* buffer descriptors for a port - // *must* be in the same 64K block. All descriptors on a port - // share a common 'base' address (upper 8 bits of 24 bits) programmed - // into the CBP register. - info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; - - /* Calculate the number of DMA buffers necessary to hold the */ - /* largest allowable frame size. Note: If the max frame size is */ - /* not an even multiple of the DMA buffer size then we need to */ - /* round the buffer count per frame up one. */ - - BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); - if ( info->max_frame_size % SCABUFSIZE ) - BuffersPerFrame++; - - /* calculate total number of data buffers (SCABUFSIZE) possible - * in one ports memory (SCA_MEM_SIZE/4) after allocating memory - * for the descriptor list (BUFFERLISTSIZE). - */ - BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; - - /* limit number of buffers to maximum amount of descriptors */ - if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) - BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); - - /* use enough buffers to transmit one max size frame */ - info->tx_buf_count = BuffersPerFrame + 1; - - /* never use more than half the available buffers for transmit */ - if (info->tx_buf_count > (BufferCount/2)) - info->tx_buf_count = BufferCount/2; - - if (info->tx_buf_count > SCAMAXDESC) - info->tx_buf_count = SCAMAXDESC; - - /* use remaining buffers for receive */ - info->rx_buf_count = BufferCount - info->tx_buf_count; - - if (info->rx_buf_count > SCAMAXDESC) - info->rx_buf_count = SCAMAXDESC; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", - __FILE__,__LINE__, info->device_name, - info->tx_buf_count,info->rx_buf_count); - - if ( alloc_buf_list( info ) < 0 || - alloc_frame_bufs(info, - info->rx_buf_list, - info->rx_buf_list_ex, - info->rx_buf_count) < 0 || - alloc_frame_bufs(info, - info->tx_buf_list, - info->tx_buf_list_ex, - info->tx_buf_count) < 0 || - alloc_tmp_rx_buf(info) < 0 ) { - printk("%s(%d):%s Can't allocate DMA buffer memory\n", - __FILE__,__LINE__, info->device_name); - return -ENOMEM; - } - - rx_reset_buffers( info ); - - return 0; -} - -/* Allocate DMA buffers for the transmit and receive descriptor lists. - */ -static int alloc_buf_list(SLMP_INFO *info) -{ - unsigned int i; - - /* build list in adapter shared memory */ - info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; - info->buffer_list_phys = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; - - memset(info->buffer_list, 0, BUFFERLISTSIZE); - - /* Save virtual address pointers to the receive and */ - /* transmit buffer lists. (Receive 1st). These pointers will */ - /* be used by the processor to access the lists. */ - info->rx_buf_list = (SCADESC *)info->buffer_list; - - info->tx_buf_list = (SCADESC *)info->buffer_list; - info->tx_buf_list += info->rx_buf_count; - - /* Build links for circular buffer entry lists (tx and rx) - * - * Note: links are physical addresses read by the SCA device - * to determine the next buffer entry to use. - */ - - for ( i = 0; i < info->rx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->rx_buf_list_ex[i].phys_entry = - info->buffer_list_phys + (i * sizeof(SCABUFSIZE)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - info->rx_buf_list[i].next = info->buffer_list_phys; - if ( i < info->rx_buf_count - 1 ) - info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - - info->rx_buf_list[i].length = SCABUFSIZE; - } - - for ( i = 0; i < info->tx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + - ((info->rx_buf_count + i) * sizeof(SCADESC)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->tx_buf_list[i].next = info->buffer_list_phys + - info->rx_buf_count * sizeof(SCADESC); - - if ( i < info->tx_buf_count - 1 ) - info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - } - - return 0; -} - -/* Allocate the frame DMA buffers used by the specified buffer list. - */ -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) -{ - int i; - unsigned long phys_addr; - - for ( i = 0; i < count; i++ ) { - buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; - phys_addr = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += SCABUFSIZE; - - buf_list[i].buf_ptr = (unsigned short)phys_addr; - buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); - } - - return 0; -} - -static void free_dma_bufs(SLMP_INFO *info) -{ - info->buffer_list = NULL; - info->rx_buf_list = NULL; - info->tx_buf_list = NULL; -} - -/* allocate buffer large enough to hold max_frame_size. - * This buffer is used to pass an assembled frame to the line discipline. - */ -static int alloc_tmp_rx_buf(SLMP_INFO *info) -{ - info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (info->tmp_rx_buf == NULL) - return -ENOMEM; - return 0; -} - -static void free_tmp_rx_buf(SLMP_INFO *info) -{ - kfree(info->tmp_rx_buf); - info->tmp_rx_buf = NULL; -} - -static int claim_resources(SLMP_INFO *info) -{ - if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->shared_mem_requested = true; - - if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { - printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->lcr_mem_requested = true; - - if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_base_requested = true; - - if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_statctrl_requested = true; - - info->memory_base = ioremap_nocache(info->phys_memory_base, - SCA_MEM_SIZE); - if (!info->memory_base) { - printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - - info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE); - if (!info->lcr_base) { - printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->lcr_base += info->lcr_offset; - - info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE); - if (!info->sca_base) { - printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->sca_base += info->sca_offset; - - info->statctrl_base = ioremap_nocache(info->phys_statctrl_base, - PAGE_SIZE); - if (!info->statctrl_base) { - printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->statctrl_base += info->statctrl_offset; - - if ( !memory_test(info) ) { - printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_MemoryError; - goto errout; - } - - return 0; - -errout: - release_resources( info ); - return -ENODEV; -} - -static void release_resources(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() entry\n", - __FILE__,__LINE__,info->device_name ); - - if ( info->irq_requested ) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - - if ( info->shared_mem_requested ) { - release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); - info->shared_mem_requested = false; - } - if ( info->lcr_mem_requested ) { - release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = false; - } - if ( info->sca_base_requested ) { - release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); - info->sca_base_requested = false; - } - if ( info->sca_statctrl_requested ) { - release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); - info->sca_statctrl_requested = false; - } - - if (info->memory_base){ - iounmap(info->memory_base); - info->memory_base = NULL; - } - - if (info->sca_base) { - iounmap(info->sca_base - info->sca_offset); - info->sca_base=NULL; - } - - if (info->statctrl_base) { - iounmap(info->statctrl_base - info->statctrl_offset); - info->statctrl_base=NULL; - } - - if (info->lcr_base){ - iounmap(info->lcr_base - info->lcr_offset); - info->lcr_base = NULL; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() exit\n", - __FILE__,__LINE__,info->device_name ); -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - */ -static void add_device(SLMP_INFO *info) -{ - info->next_device = NULL; - info->line = synclinkmp_device_count; - sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); - - if (info->line < MAX_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - synclinkmp_device_count++; - - if ( !synclinkmp_device_list ) - synclinkmp_device_list = info; - else { - SLMP_INFO *current_dev = synclinkmp_device_list; - while( current_dev->next_device ) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if ( info->max_frame_size < 4096 ) - info->max_frame_size = 4096; - else if ( info->max_frame_size > 65535 ) - info->max_frame_size = 65535; - - printk( "SyncLink MultiPort %s: " - "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif -} - -static const struct tty_port_operations port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* Allocate and initialize a device instance structure - * - * Return Value: pointer to SLMP_INFO if success, otherwise NULL - */ -static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) -{ - SLMP_INFO *info; - - info = kzalloc(sizeof(SLMP_INFO), - GFP_KERNEL); - - if (!info) { - printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", - __FILE__,__LINE__, adapter_num, port_num); - } else { - tty_port_init(&info->port); - info->port.ops = &port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->adapter_num = adapter_num; - info->port_num = port_num; - - /* Copy configuration info to device instance data */ - info->irq_level = pdev->irq; - info->phys_lcr_base = pci_resource_start(pdev,0); - info->phys_sca_base = pci_resource_start(pdev,2); - info->phys_memory_base = pci_resource_start(pdev,3); - info->phys_statctrl_base = pci_resource_start(pdev,4); - - /* Because veremap only works on page boundaries we must map - * a larger area than is actually implemented for the LCR - * memory range. We map a full page starting at the page boundary. - */ - info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); - info->phys_lcr_base &= ~(PAGE_SIZE-1); - - info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); - info->phys_sca_base &= ~(PAGE_SIZE-1); - - info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); - info->phys_statctrl_base &= ~(PAGE_SIZE-1); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->irq_flags = IRQF_SHARED; - - setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); - setup_timer(&info->status_timer, status_timeout, - (unsigned long)info); - - /* Store the PCI9050 misc control register value because a flaw - * in the PCI9050 prevents LCR registers from being read if - * BIOS assigns an LCR base address with bit 7 set. - * - * Only the misc control register is accessed for which only - * write access is needed, so set an initial value and change - * bits to the device instance data as we write the value - * to the actual misc control register. - */ - info->misc_ctrl_value = 0x087e4546; - - /* initial port state is unknown - if startup errors - * occur, init_error will be set to indicate the - * problem. Once the port is fully initialized, - * this value will be set to 0 to indicate the - * port is available. - */ - info->init_error = -1; - } - - return info; -} - -static void device_init(int adapter_num, struct pci_dev *pdev) -{ - SLMP_INFO *port_array[SCA_MAX_PORTS]; - int port; - - /* allocate device instances for up to SCA_MAX_PORTS devices */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - port_array[port] = alloc_dev(adapter_num,port,pdev); - if( port_array[port] == NULL ) { - for ( --port; port >= 0; --port ) - kfree(port_array[port]); - return; - } - } - - /* give copy of port_array to all ports and add to device list */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); - add_device( port_array[port] ); - spin_lock_init(&port_array[port]->lock); - } - - /* Allocate and claim adapter resources */ - if ( !claim_resources(port_array[0]) ) { - - alloc_dma_bufs(port_array[0]); - - /* copy resource information from first port to others */ - for ( port = 1; port < SCA_MAX_PORTS; ++port ) { - port_array[port]->lock = port_array[0]->lock; - port_array[port]->irq_level = port_array[0]->irq_level; - port_array[port]->memory_base = port_array[0]->memory_base; - port_array[port]->sca_base = port_array[0]->sca_base; - port_array[port]->statctrl_base = port_array[0]->statctrl_base; - port_array[port]->lcr_base = port_array[0]->lcr_base; - alloc_dma_bufs(port_array[port]); - } - - if ( request_irq(port_array[0]->irq_level, - synclinkmp_interrupt, - port_array[0]->irq_flags, - port_array[0]->device_name, - port_array[0]) < 0 ) { - printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n", - __FILE__,__LINE__, - port_array[0]->device_name, - port_array[0]->irq_level ); - } - else { - port_array[0]->irq_requested = true; - adapter_test(port_array[0]); - } - } -} - -static const struct tty_operations ops = { - .open = open, - .close = close, - .write = write, - .put_char = put_char, - .flush_chars = flush_chars, - .write_room = write_room, - .chars_in_buffer = chars_in_buffer, - .flush_buffer = flush_buffer, - .ioctl = ioctl, - .throttle = throttle, - .unthrottle = unthrottle, - .send_xchar = send_xchar, - .break_ctl = set_break, - .wait_until_sent = wait_until_sent, - .set_termios = set_termios, - .stop = tx_hold, - .start = tx_release, - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = get_icount, - .proc_fops = &synclinkmp_proc_fops, -}; - - -static void synclinkmp_cleanup(void) -{ - int rc; - SLMP_INFO *info; - SLMP_INFO *tmp; - - printk("Unloading %s %s\n", driver_name, driver_version); - - if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); - } - - /* reset devices */ - info = synclinkmp_device_list; - while(info) { - reset_port(info); - info = info->next_device; - } - - /* release devices */ - info = synclinkmp_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - free_dma_bufs(info); - free_tmp_rx_buf(info); - if ( info->port_num == 0 ) { - if (info->sca_base) - write_reg(info, LPR, 1); /* set low power mode */ - release_resources(info); - } - tmp = info; - info = info->next_device; - kfree(tmp); - } - - pci_unregister_driver(&synclinkmp_pci_driver); -} - -/* Driver initialization entry point. - */ - -static int __init synclinkmp_init(void) -{ - int rc; - - if (break_on_load) { - synclinkmp_get_text_ptr(); - BREAKPOINT(); - } - - printk("%s %s\n", driver_name, driver_version); - - if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { - printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); - return rc; - } - - serial_driver = alloc_tty_driver(128); - if (!serial_driver) { - rc = -ENOMEM; - goto error; - } - - /* Initialize the tty_driver structure */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = "synclinkmp"; - serial_driver->name = "ttySLM"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } - - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); - - return 0; - -error: - synclinkmp_cleanup(); - return rc; -} - -static void __exit synclinkmp_exit(void) -{ - synclinkmp_cleanup(); -} - -module_init(synclinkmp_init); -module_exit(synclinkmp_exit); - -/* Set the port for internal loopback mode. - * The TxCLK and RxCLK signals are generated from the BRG and - * the TxD is looped back to the RxD internally. - */ -static void enable_loopback(SLMP_INFO *info, int enable) -{ - if (enable) { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); - - /* degate external TxC clock source */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 100=BRG - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x40); - write_reg(info, TXS, 0x40); - - } else { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel connection, 0=normal - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 000=RxC/TxC Pin - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x00); - write_reg(info, TXS, 0x00); - } - - /* set LinkSpeed if available, otherwise default to 2Mbps */ - if (info->params.clock_speed) - set_rate(info, info->params.clock_speed); - else - set_rate(info, 3686400); -} - -/* Set the baud rate register to the desired speed - * - * data_rate data rate of clock in bits per second - * A data rate of 0 disables the AUX clock. - */ -static void set_rate( SLMP_INFO *info, u32 data_rate ) -{ - u32 TMCValue; - unsigned char BRValue; - u32 Divisor=0; - - /* fBRG = fCLK/(TMC * 2^BR) - */ - if (data_rate != 0) { - Divisor = 14745600/data_rate; - if (!Divisor) - Divisor = 1; - - TMCValue = Divisor; - - BRValue = 0; - if (TMCValue != 1 && TMCValue != 2) { - /* BRValue of 0 provides 50/50 duty cycle *only* when - * TMCValue is 1 or 2. BRValue of 1 to 9 always provides - * 50/50 duty cycle. - */ - BRValue = 1; - TMCValue >>= 1; - } - - /* while TMCValue is too big for TMC register, divide - * by 2 and increment BR exponent. - */ - for(; TMCValue > 256 && BRValue < 10; BRValue++) - TMCValue >>= 1; - - write_reg(info, TXS, - (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); - write_reg(info, RXS, - (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); - write_reg(info, TMC, (unsigned char)TMCValue); - } - else { - write_reg(info, TXS,0); - write_reg(info, RXS,0); - write_reg(info, TMC, 0); - } -} - -/* Disable receiver - */ -static void rx_stop(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ - - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ - - info->rx_enabled = false; - info->rx_overflow = false; -} - -/* enable the receiver - */ -static void rx_start(SLMP_INFO *info) -{ - int i; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_start()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - /* HDLC, disabe IRQ on rxdata */ - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); - - /* Reset all Rx DMA buffers and program rx dma */ - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - - for (i = 0; i < info->rx_buf_count; i++) { - info->rx_buf_list[i].status = 0xff; - - // throttle to 4 shared memory writes at a time to prevent - // hogging local bus (keep latency time for DMA requests low). - if (!(i % 4)) - read_status_reg(info); - } - info->current_rx_buf = 0; - - /* set current/1st descriptor address */ - write_reg16(info, RXDMA + CDA, - info->rx_buf_list_ex[0].phys_entry); - - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, - info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); - - /* set buffer length (shared by all rx dma data buffers) */ - write_reg16(info, RXDMA + BFL, SCABUFSIZE); - - write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ - write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ - } else { - /* async, enable IRQ on rxdata */ - info->ie0_value |= RXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - write_reg(info, CMD, RXENABLE); - - info->rx_overflow = false; - info->rx_enabled = true; -} - -/* Enable the transmitter and send a transmit frame if - * one is loaded in the DMA buffers. - */ -static void tx_start(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_start() tx_count=%d\n", - __FILE__,__LINE__, info->device_name,info->tx_count ); - - if (!info->tx_enabled ) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - info->tx_enabled = true; - } - - if ( info->tx_count ) { - - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - - info->drop_rts_on_tx_done = false; - - if (info->params.mode != MGSL_MODE_ASYNC) { - - if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { - get_signals( info ); - if ( !(info->serial_signals & SerialSignal_RTS) ) { - info->serial_signals |= SerialSignal_RTS; - set_signals( info ); - info->drop_rts_on_tx_done = true; - } - } - - write_reg16(info, TRC0, - (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - /* set TX CDA (current descriptor address) */ - write_reg16(info, TXDMA + CDA, - info->tx_buf_list_ex[0].phys_entry); - - /* set TX EDA (last descriptor address) */ - write_reg16(info, TXDMA + EDA, - info->tx_buf_list_ex[info->last_tx_buf].phys_entry); - - /* enable underrun IRQ */ - info->ie1_value &= ~IDLE; - info->ie1_value |= UDRN; - write_reg(info, IE1, info->ie1_value); - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); - - write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ - write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ - - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - else { - tx_load_fifo(info); - /* async, enable IRQ on txdata */ - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - info->tx_active = true; - } -} - -/* stop the transmitter and DMA - */ -static void tx_stop( SLMP_INFO *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - del_timer(&info->tx_timer); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXRESET); - - info->ie1_value &= ~(UDRN + IDLE); - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ - - info->tx_enabled = false; - info->tx_active = false; -} - -/* Fill the transmit FIFO until the FIFO is full or - * there is no more data to load. - */ -static void tx_load_fifo(SLMP_INFO *info) -{ - u8 TwoBytes[2]; - - /* do nothing is now tx data available and no XON/XOFF pending */ - - if ( !info->tx_count && !info->x_char ) - return; - - /* load the Transmit FIFO until FIFOs full or all data sent */ - - while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { - - /* there is more space in the transmit FIFO and */ - /* there is more data in transmit buffer */ - - if ( (info->tx_count > 1) && !info->x_char ) { - /* write 16-bits */ - TwoBytes[0] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - TwoBytes[1] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - - write_reg16(info, TRB, *((u16 *)TwoBytes)); - - info->tx_count -= 2; - info->icount.tx += 2; - } else { - /* only 1 byte left to transmit or 1 FIFO slot left */ - - if (info->x_char) { - /* transmit pending high priority char */ - write_reg(info, TRB, info->x_char); - info->x_char = 0; - } else { - write_reg(info, TRB, info->tx_buf[info->tx_get++]); - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - info->tx_count--; - } - info->icount.tx++; - } - } -} - -/* Reset a port to a known state - */ -static void reset_port(SLMP_INFO *info) -{ - if (info->sca_base) { - - tx_stop(info); - rx_stop(info); - - info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - - /* disable all port interrupts */ - info->ie0_value = 0; - info->ie1_value = 0; - info->ie2_value = 0; - write_reg(info, IE0, info->ie0_value); - write_reg(info, IE1, info->ie1_value); - write_reg(info, IE2, info->ie2_value); - - write_reg(info, CMD, CHRESET); - } -} - -/* Reset all the ports to a known state. - */ -static void reset_adapter(SLMP_INFO *info) -{ - int i; - - for ( i=0; i < SCA_MAX_PORTS; ++i) { - if (info->port_array[i]) - reset_port(info->port_array[i]); - } -} - -/* Program port for asynchronous communications. - */ -static void async_mode(SLMP_INFO *info) -{ - - unsigned char RegValue; - - tx_stop(info); - rx_stop(info); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 000=async - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 0=disabled - * 01..00 STOP<1..0> Stop bits (00=1,10=2) - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.stop_bits != 1) - RegValue |= BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 - * 03..02 RXCHR<1..0>, rx char size - * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd - * - * 0100 0000 - */ - RegValue = 0x40; - switch (info->params.data_bits) { - case 7: RegValue |= BIT4 + BIT2; break; - case 6: RegValue |= BIT5 + BIT3; break; - case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; - } - if (info->params.parity != ASYNC_PARITY_NONE) { - RegValue |= BIT1; - if (info->params.parity == ASYNC_PARITY_ODD) - RegValue |= BIT0; - } - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07..02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.loopback) - RegValue |= (BIT1 + BIT0); - write_reg(info, MD2, RegValue); - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, TXS, RegValue); - - /* Control Register - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - tx_set_idle(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte - */ - write_reg(info, RRC, 0x00); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes - */ - write_reg(info, TRC0, 0x10); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) - */ - write_reg(info, TRC1, 0x1e); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* enable status interrupts */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* enable break detect interrupt */ - info->ie1_value = BRKD; - write_reg(info, IE1, info->ie1_value); - - /* enable rx overrun interrupt */ - info->ie2_value = OVRN; - write_reg(info, IE2, info->ie2_value); - - set_rate( info, info->params.data_rate * 16 ); -} - -/* Program the SCA for HDLC communications. - */ -static void hdlc_mode(SLMP_INFO *info) -{ - unsigned char RegValue; - u32 DpllDivisor; - - // Can't use DPLL because SCA outputs recovered clock on RxC when - // DPLL mode selected. This causes output contention with RxC receiver. - // Use of DPLL would require external hardware to disable RxC receiver - // when DPLL mode selected. - info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); - - /* disable DMA interrupts */ - write_reg(info, TXDMA + DIR, 0); - write_reg(info, RXDMA + DIR, 0); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 1=enabled - * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 - * 00 CRC0, CRC initial value, 1 = all 1s - * - * 1000 0001 - */ - RegValue = 0x81; - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - RegValue |= BIT4; - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - RegValue |= BIT4; - if (info->params.crc_type == HDLC_CRC_16_CCITT) - RegValue |= BIT2 + BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 ADDRS<1..0>, Address detect, 00=no addr check - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits - * 03..02 RXCHR<1..0>, rx char size, 00=8 bits - * 01..00 PMPM<1..0>, Parity mode, 00=no parity - * - * 0000 0000 - */ - RegValue = 0x00; - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07 NRZFM, 0=NRZ, 1=FM - * 06..05 CODE<1..0> Encoding, 00=NRZ - * 04..03 DRATE<1..0> DPLL Divisor, 00=8 - * 02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 0=normal - * - * 0000 0000 - */ - RegValue = 0x00; - switch(info->params.encoding) { - case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ -#if 0 - case HDLC_ENCODING_NRZB: /* not supported */ - case HDLC_ENCODING_NRZI_MARK: /* not supported */ - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ -#endif - } - if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { - DpllDivisor = 16; - RegValue |= BIT3; - } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { - DpllDivisor = 8; - } else { - DpllDivisor = 32; - RegValue |= BIT4; - } - write_reg(info, MD2, RegValue); - - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_RXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_TXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_TXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, TXS, RegValue); - - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - set_rate(info, info->params.clock_speed * DpllDivisor); - else - set_rate(info, info->params.clock_speed); - - /* GPDATA (General Purpose I/O Data Register) - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - if (info->params.flags & HDLC_FLAG_TXC_BRG) - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - else - info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active - */ - write_reg(info, RRC, rx_active_fifo_level); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active - */ - write_reg(info, TRC0, tx_active_fifo_level); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) - */ - write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); - - /* DMR, DMA Mode Register - * - * 07..05 Reserved, must be 0 - * 04 TMOD, Transfer Mode: 1=chained-block - * 03 Reserved, must be 0 - * 02 NF, Number of Frames: 1=multi-frame - * 01 CNTE, Frame End IRQ Counter enable: 0=disabled - * 00 Reserved, must be 0 - * - * 0001 0100 - */ - write_reg(info, TXDMA + DMR, 0x14); - write_reg(info, RXDMA + DMR, 0x14); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, RXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, TXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* enable status interrupts. other code enables/disables - * the individual sources for these two interrupt classes. - */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* preamble not supported ! */ - - tx_set_idle(info); - tx_stop(info); - rx_stop(info); - - set_rate(info, info->params.clock_speed); - - if (info->params.loopback) - enable_loopback(info,1); -} - -/* Set the transmit HDLC idle mode - */ -static void tx_set_idle(SLMP_INFO *info) -{ - unsigned char RegValue = 0xff; - - /* Map API idle mode to SCA register bits */ - switch(info->idle_mode) { - case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; - case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; - case HDLC_TXIDLE_ONES: RegValue = 0xff; break; - case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; - case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; - case HDLC_TXIDLE_MARK: RegValue = 0xff; break; - } - - write_reg(info, IDL, RegValue); -} - -/* Query the adapter for the state of the V24 status (input) signals. - */ -static void get_signals(SLMP_INFO *info) -{ - u16 status = read_reg(info, SR3); - u16 gpstatus = read_status_reg(info); - u16 testbit; - - /* clear all serial signals except DTR and RTS */ - info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; - - /* set serial signal bits to reflect MISR */ - - if (!(status & BIT3)) - info->serial_signals |= SerialSignal_CTS; - - if ( !(status & BIT2)) - info->serial_signals |= SerialSignal_DCD; - - testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_RI; - - testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_DSR; -} - -/* Set the state of DTR and RTS based on contents of - * serial_signals member of device context. - */ -static void set_signals(SLMP_INFO *info) -{ - unsigned char RegValue; - u16 EnableBit; - - RegValue = read_reg(info, CTL); - if (info->serial_signals & SerialSignal_RTS) - RegValue &= ~BIT0; - else - RegValue |= BIT0; - write_reg(info, CTL, RegValue); - - // Port 0..3 DTR is ctrl reg <1,3,5,7> - EnableBit = BIT1 << (info->port_num*2); - if (info->serial_signals & SerialSignal_DTR) - info->port_array[0]->ctrlreg_value &= ~EnableBit; - else - info->port_array[0]->ctrlreg_value |= EnableBit; - write_control_reg(info); -} - -/*******************/ -/* DMA Buffer Code */ -/*******************/ - -/* Set the count for all receive buffers to SCABUFSIZE - * and set the current buffer to the first buffer. This effectively - * makes all buffers free and discards any data in buffers. - */ -static void rx_reset_buffers(SLMP_INFO *info) -{ - rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); -} - -/* Free the buffers used by a received frame - * - * info pointer to device instance data - * first index of 1st receive buffer of frame - * last index of last receive buffer of frame - */ -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) -{ - bool done = false; - - while(!done) { - /* reset current buffer for reuse */ - info->rx_buf_list[first].status = 0xff; - - if (first == last) { - done = true; - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); - } - - first++; - if (first == info->rx_buf_count) - first = 0; - } - - /* set current buffer to next buffer after last buffer of frame */ - info->current_rx_buf = first; -} - -/* Return a received frame from the receive DMA buffers. - * Only frames received without errors are returned. - * - * Return Value: true if frame returned, otherwise false - */ -static bool rx_get_frame(SLMP_INFO *info) -{ - unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ - unsigned short status; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - unsigned char addr_field = 0xff; - SCADESC *desc; - SCADESC_EX *desc_ex; - -CheckAgain: - /* assume no frame returned, set zero length */ - framesize = 0; - addr_field = 0xff; - - /* - * current_rx_buf points to the 1st buffer of the next available - * receive frame. To find the last buffer of the frame look for - * a non-zero status field in the buffer entries. (The status - * field is set by the 16C32 after completing a receive frame. - */ - StartIndex = EndIndex = info->current_rx_buf; - - for ( ;; ) { - desc = &info->rx_buf_list[EndIndex]; - desc_ex = &info->rx_buf_list_ex[EndIndex]; - - if (desc->status == 0xff) - goto Cleanup; /* current desc still in use, no frames available */ - - if (framesize == 0 && info->params.addr_filter != 0xff) - addr_field = desc_ex->virt_addr[0]; - - framesize += desc->length; - - /* Status != 0 means last buffer of frame */ - if (desc->status) - break; - - EndIndex++; - if (EndIndex == info->rx_buf_count) - EndIndex = 0; - - if (EndIndex == info->current_rx_buf) { - /* all buffers have been 'used' but none mark */ - /* the end of a frame. Reset buffers and receiver. */ - if ( info->rx_enabled ){ - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - goto Cleanup; - } - - } - - /* check status of receive frame */ - - /* frame status is byte stored after frame data - * - * 7 EOM (end of msg), 1 = last buffer of frame - * 6 Short Frame, 1 = short frame - * 5 Abort, 1 = frame aborted - * 4 Residue, 1 = last byte is partial - * 3 Overrun, 1 = overrun occurred during frame reception - * 2 CRC, 1 = CRC error detected - * - */ - status = desc->status; - - /* ignore CRC bit if not using CRC (bit is undefined) */ - /* Note:CRC is not save to data buffer */ - if (info->params.crc_type == HDLC_CRC_NONE) - status &= ~BIT2; - - if (framesize == 0 || - (addr_field != 0xff && addr_field != info->params.addr_filter)) { - /* discard 0 byte frames, this seems to occur sometime - * when remote is idling flags. - */ - rx_free_frame_buffers(info, StartIndex, EndIndex); - goto CheckAgain; - } - - if (framesize < 2) - status |= BIT6; - - if (status & (BIT6+BIT5+BIT3+BIT2)) { - /* received frame has errors, - * update counts and mark frame size as 0 - */ - if (status & BIT6) - info->icount.rxshort++; - else if (status & BIT5) - info->icount.rxabort++; - else if (status & BIT3) - info->icount.rxover++; - else - info->icount.rxcrc++; - - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, - min_t(int, framesize,SCABUFSIZE),0); - - if (framesize) { - if (framesize > info->max_frame_size) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous intermediate buffer */ - int copy_count = framesize; - int index = StartIndex; - unsigned char *ptmp = info->tmp_rx_buf; - info->tmp_rx_buf_count = framesize; - - info->icount.rxok++; - - while(copy_count) { - int partial_count = min(copy_count,SCABUFSIZE); - memcpy( ptmp, - info->rx_buf_list_ex[index].virt_addr, - partial_count ); - ptmp += partial_count; - copy_count -= partial_count; - - if ( ++index == info->rx_buf_count ) - index = 0; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->tmp_rx_buf,framesize); - else -#endif - ldisc_receive_buf(tty,info->tmp_rx_buf, - info->flag_buf, framesize); - } - } - /* Free the buffers used by this frame. */ - rx_free_frame_buffers( info, StartIndex, EndIndex ); - - ReturnCode = true; - -Cleanup: - if ( info->rx_enabled && info->rx_overflow ) { - /* Receiver is enabled, but needs to restarted due to - * rx buffer overflow. If buffers are empty, restart receiver. - */ - if (info->rx_buf_list[EndIndex].status == 0xff) { - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - } - - return ReturnCode; -} - -/* load the transmit DMA buffer with data - */ -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) -{ - unsigned short copy_count; - unsigned int i = 0; - SCADESC *desc; - SCADESC_EX *desc_ex; - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1); - - /* Copy source buffer to one or more DMA buffers, starting with - * the first transmit dma buffer. - */ - for(i=0;;) - { - copy_count = min_t(unsigned short,count,SCABUFSIZE); - - desc = &info->tx_buf_list[i]; - desc_ex = &info->tx_buf_list_ex[i]; - - load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); - - desc->length = copy_count; - desc->status = 0; - - buf += copy_count; - count -= copy_count; - - if (!count) - break; - - i++; - if (i >= info->tx_buf_count) - i = 0; - } - - info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ - info->last_tx_buf = ++i; -} - -static bool register_test(SLMP_INFO *info) -{ - static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; - static unsigned int count = ARRAY_SIZE(testval); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_AddressFailure; - - /* Write bit patterns to various registers but do it out of */ - /* sync, then read back and verify values. */ - - for (i = 0 ; i < count ; i++) { - write_reg(info, TMC, testval[i]); - write_reg(info, IDL, testval[(i+1)%count]); - write_reg(info, SA0, testval[(i+2)%count]); - write_reg(info, SA1, testval[(i+3)%count]); - - if ( (read_reg(info, TMC) != testval[i]) || - (read_reg(info, IDL) != testval[(i+1)%count]) || - (read_reg(info, SA0) != testval[(i+2)%count]) || - (read_reg(info, SA1) != testval[(i+3)%count]) ) - { - rc = false; - break; - } - } - - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -static bool irq_test(SLMP_INFO *info) -{ - unsigned long timeout; - unsigned long flags; - - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = false; - - /* setup timer0 on SCA0 to interrupt */ - - /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ - write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); - - write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ - write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ - - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 1=enabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0101 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0x50); - - spin_unlock_irqrestore(&info->lock,flags); - - timeout=100; - while( timeout-- && !info->irq_occurred ) { - msleep_interruptible(10); - } - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return info->irq_occurred; -} - -/* initialize individual SCA device (2 ports) - */ -static bool sca_init(SLMP_INFO *info) -{ - /* set wait controller to single mem partition (low), no wait states */ - write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ - write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ - write_reg(info, WCRL, 0); /* wait controller low range */ - write_reg(info, WCRM, 0); /* wait controller mid range */ - write_reg(info, WCRH, 0); /* wait controller high range */ - - /* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 03 CCC, channel change condition: 0=every cycle - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x04 - */ - write_reg(info, DPCR, dma_priority); - - /* DMA Master Enable, BIT7: 1=enable all channels */ - write_reg(info, DMER, 0x80); - - /* enable all interrupt classes */ - write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ - write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ - write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ - - /* ITCR, interrupt control register - * 07 IPC, interrupt priority, 0=MSCI->DMA - * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle - * 04 VOS, Vector Output, 0=unmodified vector - * 03..00 Reserved, must be 0 - */ - write_reg(info, ITCR, 0); - - return true; -} - -/* initialize adapter hardware - */ -static bool init_adapter(SLMP_INFO *info) -{ - int i; - - /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ - volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); - u32 readval; - - info->misc_ctrl_value |= BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* - * Force at least 170ns delay before clearing - * reset bit. Each read from LCR takes at least - * 30ns so 10 times for 300ns to be safe. - */ - for(i=0;i<10;i++) - readval = *MiscCtrl; - - info->misc_ctrl_value &= ~BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* init control reg (all DTRs off, all clksel=input) */ - info->ctrlreg_value = 0xaa; - write_control_reg(info); - - { - volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); - lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); - - switch(read_ahead_count) - { - case 16: - lcr1_brdr_value |= BIT5 + BIT4 + BIT3; - break; - case 8: - lcr1_brdr_value |= BIT5 + BIT4; - break; - case 4: - lcr1_brdr_value |= BIT5 + BIT3; - break; - case 0: - lcr1_brdr_value |= BIT5; - break; - } - - *LCR1BRDR = lcr1_brdr_value; - *MiscCtrl = misc_ctrl_value; - } - - sca_init(info->port_array[0]); - sca_init(info->port_array[2]); - - return true; -} - -/* Loopback an HDLC frame to test the hardware - * interrupt and DMA functions. - */ -static bool loopback_test(SLMP_INFO *info) -{ -#define TESTFRAMESIZE 20 - - unsigned long timeout; - u16 count = TESTFRAMESIZE; - unsigned char buf[TESTFRAMESIZE]; - bool rc = false; - unsigned long flags; - - struct tty_struct *oldtty = info->port.tty; - u32 speed = info->params.clock_speed; - - info->params.clock_speed = 3686400; - info->port.tty = NULL; - - /* assume failure */ - info->init_error = DiagStatus_DmaFailure; - - /* build and send transmit frame */ - for (count = 0; count < TESTFRAMESIZE;++count) - buf[count] = (unsigned char)count; - - memset(info->tmp_rx_buf,0,TESTFRAMESIZE); - - /* program hardware for HDLC and enabled receiver */ - spin_lock_irqsave(&info->lock,flags); - hdlc_mode(info); - enable_loopback(info,1); - rx_start(info); - info->tx_count = count; - tx_load_dma_buffer(info,buf,count); - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* wait for receive complete */ - /* Set a timeout for waiting for interrupt. */ - for ( timeout = 100; timeout; --timeout ) { - msleep_interruptible(10); - - if (rx_get_frame(info)) { - rc = true; - break; - } - } - - /* verify received frame length and contents */ - if (rc && - ( info->tmp_rx_buf_count != count || - memcmp(buf, info->tmp_rx_buf,count))) { - rc = false; - } - - spin_lock_irqsave(&info->lock,flags); - reset_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->params.clock_speed = speed; - info->port.tty = oldtty; - - return rc; -} - -/* Perform diagnostics on hardware - */ -static int adapter_test( SLMP_INFO *info ) -{ - unsigned long flags; - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):Testing device %s\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - init_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->port_array[0]->port_count = 0; - - if ( register_test(info->port_array[0]) && - register_test(info->port_array[1])) { - - info->port_array[0]->port_count = 2; - - if ( register_test(info->port_array[2]) && - register_test(info->port_array[3]) ) - info->port_array[0]->port_count += 2; - } - else { - printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", - __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); - return -ENODEV; - } - - if ( !irq_test(info->port_array[0]) || - !irq_test(info->port_array[1]) || - (info->port_count == 4 && !irq_test(info->port_array[2])) || - (info->port_count == 4 && !irq_test(info->port_array[3]))) { - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); - return -ENODEV; - } - - if (!loopback_test(info->port_array[0]) || - !loopback_test(info->port_array[1]) || - (info->port_count == 4 && !loopback_test(info->port_array[2])) || - (info->port_count == 4 && !loopback_test(info->port_array[3]))) { - printk( "%s(%d):DMA test failure for device %s\n", - __FILE__,__LINE__,info->device_name); - return -ENODEV; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name ); - - info->port_array[0]->init_error = 0; - info->port_array[1]->init_error = 0; - if ( info->port_count > 2 ) { - info->port_array[2]->init_error = 0; - info->port_array[3]->init_error = 0; - } - - return 0; -} - -/* Test the shared memory on a PCI adapter. - */ -static bool memory_test(SLMP_INFO *info) -{ - static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; - unsigned long count = ARRAY_SIZE(testval); - unsigned long i; - unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); - unsigned long * addr = (unsigned long *)info->memory_base; - - /* Test data lines with test pattern at one location. */ - - for ( i = 0 ; i < count ; i++ ) { - *addr = testval[i]; - if ( *addr != testval[i] ) - return false; - } - - /* Test address lines with incrementing pattern over */ - /* entire address range. */ - - for ( i = 0 ; i < limit ; i++ ) { - *addr = i * 4; - addr++; - } - - addr = (unsigned long *)info->memory_base; - - for ( i = 0 ; i < limit ; i++ ) { - if ( *addr != i * 4 ) - return false; - addr++; - } - - memset( info->memory_base, 0, SCA_MEM_SIZE ); - return true; -} - -/* Load data into PCI adapter shared memory. - * - * The PCI9050 releases control of the local bus - * after completing the current read or write operation. - * - * While the PCI9050 write FIFO not empty, the - * PCI9050 treats all of the writes as a single transaction - * and does not release the bus. This causes DMA latency problems - * at high speeds when copying large data blocks to the shared memory. - * - * This function breaks a write into multiple transations by - * interleaving a read which flushes the write FIFO and 'completes' - * the write transation. This allows any pending DMA request to gain control - * of the local bus in a timely fasion. - */ -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) -{ - /* A load interval of 16 allows for 4 32-bit writes at */ - /* 136ns each for a maximum latency of 542ns on the local bus.*/ - - unsigned short interval = count / sca_pci_load_interval; - unsigned short i; - - for ( i = 0 ; i < interval ; i++ ) - { - memcpy(dest, src, sca_pci_load_interval); - read_status_reg(info); - dest += sca_pci_load_interval; - src += sca_pci_load_interval; - } - - memcpy(dest, src, count % sca_pci_load_interval); -} - -static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n",info->device_name); - else - printk("%s rx data:\n",info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i<linecount;i++) - printk("%02X ",(unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i<linecount;i++) { - if (data[i]>=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} /* end of trace_block() */ - -/* called when HDLC frame times out - * update stats and do tx completion processing - */ -static void tx_timeout(unsigned long context) -{ - SLMP_INFO *info = (SLMP_INFO*)context; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s tx_timeout()\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock,flags); - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - spin_unlock_irqrestore(&info->lock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - bh_transmit(info); -} - -/* called to periodically check the DSR/RI modem signal input status - */ -static void status_timeout(unsigned long context) -{ - u16 status = 0; - SLMP_INFO *info = (SLMP_INFO*)context; - unsigned long flags; - unsigned char delta; - - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* check for DSR/RI state change */ - - delta = info->old_signals ^ info->serial_signals; - info->old_signals = info->serial_signals; - - if (delta & SerialSignal_DSR) - status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); - - if (delta & SerialSignal_RI) - status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); - - if (delta & SerialSignal_DCD) - status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); - - if (delta & SerialSignal_CTS) - status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); - - if (status) - isr_io_pin(info,status); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); -} - - -/* Register Access Routines - - * All registers are memory mapped - */ -#define CALC_REGADDR() \ - unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ - if (info->port_num > 1) \ - RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ - if ( info->port_num & 1) { \ - if (Addr > 0x7f) \ - RegAddr += 0x40; /* DMA access */ \ - else if (Addr > 0x1f && Addr < 0x60) \ - RegAddr += 0x20; /* MSCI access */ \ - } - - -static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *RegAddr; -} -static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) -{ - CALC_REGADDR(); - *RegAddr = Value; -} - -static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *((u16 *)RegAddr); -} - -static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) -{ - CALC_REGADDR(); - *((u16 *)RegAddr) = Value; -} - -static unsigned char read_status_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - return *RegAddr; -} - -static void write_control_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - *RegAddr = info->port_array[0]->ctrlreg_value; -} - - -static int __devinit synclinkmp_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) -{ - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - device_init( ++synclinkmp_adapter_count, dev ); - return 0; -} - -static void __devexit synclinkmp_remove_one (struct pci_dev *dev) -{ -} |