diff options
Diffstat (limited to 'drivers/char/rtc.c')
| -rw-r--r-- | drivers/char/rtc.c | 556 |
1 files changed, 310 insertions, 246 deletions
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 7cac6d05d72..35259961cc3 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -1,5 +1,5 @@ /* - * Real Time Clock interface for Linux + * Real Time Clock interface for Linux * * Copyright (C) 1996 Paul Gortmaker * @@ -17,7 +17,7 @@ * has been received. If a RTC interrupt has already happened, * it will output an unsigned long and then block. The output value * contains the interrupt status in the low byte and the number of - * interrupts since the last read in the remaining high bytes. The + * interrupts since the last read in the remaining high bytes. The * /dev/rtc interface can also be used with the select(2) call. * * This program is free software; you can redistribute it and/or @@ -35,33 +35,32 @@ * 1.09a Pete Zaitcev: Sun SPARC * 1.09b Jeff Garzik: Modularize, init cleanup * 1.09c Jeff Garzik: SMP cleanup - * 1.10 Paul Barton-Davis: add support for async I/O + * 1.10 Paul Barton-Davis: add support for async I/O * 1.10a Andrea Arcangeli: Alpha updates * 1.10b Andrew Morton: SMP lock fix * 1.10c Cesar Barros: SMP locking fixes and cleanup * 1.10d Paul Gortmaker: delete paranoia check in rtc_exit * 1.10e Maciej W. Rozycki: Handle DECstation's year weirdness. - * 1.11 Takashi Iwai: Kernel access functions + * 1.11 Takashi Iwai: Kernel access functions * rtc_register/rtc_unregister/rtc_control * 1.11a Daniele Bellucci: Audit create_proc_read_entry in rtc_init * 1.12 Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer * CONFIG_HPET_EMULATE_RTC + * 1.12a Maciej W. Rozycki: Handle memory-mapped chips properly. * 1.12ac Alan Cox: Allow read access to the day of week register + * 1.12b David John: Remove calls to the BKL. */ -#define RTC_VERSION "1.12ac" - -#define RTC_IO_EXTENT 0x8 +#define RTC_VERSION "1.12b" /* * Note that *all* calls to CMOS_READ and CMOS_WRITE are done with * interrupts disabled. Due to the index-port/data-port (0x70/0x71) * design of the RTC, we don't want two different things trying to - * get to it at once. (e.g. the periodic 11 min sync from time.c vs. - * this driver.) + * get to it at once. (e.g. the periodic 11 min sync from + * kernel/time/ntp.c vs. this driver.) */ -#include <linux/config.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/kernel.h> @@ -75,31 +74,30 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/sched.h> #include <linux/sysctl.h> #include <linux/wait.h> #include <linux/bcd.h> #include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/ratelimit.h> #include <asm/current.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#if defined(__i386__) +#ifdef CONFIG_X86 #include <asm/hpet.h> #endif -#ifdef __sparc__ -#include <linux/pci.h> -#include <asm/ebus.h> -#ifdef __sparc_v9__ -#include <asm/isa.h> -#endif +#ifdef CONFIG_SPARC32 +#include <linux/of.h> +#include <linux/of_device.h> +#include <asm/io.h> static unsigned long rtc_port; -static int rtc_irq = PCI_IRQ_NONE; +static int rtc_irq; #endif -#ifdef CONFIG_HPET_RTC_IRQ +#ifdef CONFIG_HPET_EMULATE_RTC #undef RTC_IRQ #endif @@ -109,15 +107,20 @@ static int rtc_has_irq = 1; #ifndef CONFIG_HPET_EMULATE_RTC #define is_hpet_enabled() 0 -#define hpet_set_alarm_time(hrs, min, sec) 0 -#define hpet_set_periodic_freq(arg) 0 -#define hpet_mask_rtc_irq_bit(arg) 0 -#define hpet_set_rtc_irq_bit(arg) 0 -#define hpet_rtc_timer_init() do { } while (0) -#define hpet_rtc_dropped_irq() 0 -static inline irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) {return 0;} -#else -extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs); +#define hpet_set_alarm_time(hrs, min, sec) 0 +#define hpet_set_periodic_freq(arg) 0 +#define hpet_mask_rtc_irq_bit(arg) 0 +#define hpet_set_rtc_irq_bit(arg) 0 +#define hpet_rtc_timer_init() do { } while (0) +#define hpet_rtc_dropped_irq() 0 +#define hpet_register_irq_handler(h) ({ 0; }) +#define hpet_unregister_irq_handler(h) ({ 0; }) +#ifdef RTC_IRQ +static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + return 0; +} +#endif #endif /* @@ -132,23 +135,23 @@ static struct fasync_struct *rtc_async_queue; static DECLARE_WAIT_QUEUE_HEAD(rtc_wait); #ifdef RTC_IRQ -static struct timer_list rtc_irq_timer; +static void rtc_dropped_irq(unsigned long data); + +static DEFINE_TIMER(rtc_irq_timer, rtc_dropped_irq, 0, 0); #endif static ssize_t rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); -static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); +static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +static void rtc_get_rtc_time(struct rtc_time *rtc_tm); #ifdef RTC_IRQ static unsigned int rtc_poll(struct file *file, poll_table *wait); #endif -static void get_rtc_alm_time (struct rtc_time *alm_tm); +static void get_rtc_alm_time(struct rtc_time *alm_tm); #ifdef RTC_IRQ -static void rtc_dropped_irq(unsigned long data); - static void set_rtc_irq_bit_locked(unsigned char bit); static void mask_rtc_irq_bit_locked(unsigned char bit); @@ -167,7 +170,9 @@ static void mask_rtc_irq_bit(unsigned char bit) } #endif +#ifdef CONFIG_PROC_FS static int rtc_proc_open(struct inode *inode, struct file *file); +#endif /* * Bits in rtc_status. (6 bits of room for future expansion) @@ -178,14 +183,14 @@ static int rtc_proc_open(struct inode *inode, struct file *file); /* * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is - * protected by the big kernel lock. However, ioctl can still disable the timer - * in rtc_status and then with del_timer after the interrupt has read + * protected by the spin lock rtc_lock. However, ioctl can still disable the + * timer in rtc_status and then with del_timer after the interrupt has read * rtc_status but before mod_timer is called, which would then reenable the * timer (but you would need to have an awful timing before you'd trip on it) */ -static unsigned long rtc_status = 0; /* bitmapped status byte. */ -static unsigned long rtc_freq = 0; /* Current periodic IRQ rate */ -static unsigned long rtc_irq_data = 0; /* our output to the world */ +static unsigned long rtc_status; /* bitmapped status byte. */ +static unsigned long rtc_freq; /* Current periodic IRQ rate */ +static unsigned long rtc_irq_data; /* our output to the world */ static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */ #ifdef RTC_IRQ @@ -193,7 +198,7 @@ static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */ * rtc_task_lock nests inside rtc_lock. */ static DEFINE_SPINLOCK(rtc_task_lock); -static rtc_task_t *rtc_callback = NULL; +static rtc_task_t *rtc_callback; #endif /* @@ -203,7 +208,7 @@ static rtc_task_t *rtc_callback = NULL; static unsigned long epoch = 1900; /* year corresponding to 0x00 */ -static const unsigned char days_in_mo[] = +static const unsigned char days_in_mo[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; /* @@ -211,17 +216,18 @@ static const unsigned char days_in_mo[] = */ static inline unsigned char rtc_is_updating(void) { + unsigned long flags; unsigned char uip; - spin_lock_irq(&rtc_lock); + spin_lock_irqsave(&rtc_lock, flags); uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); - spin_unlock_irq(&rtc_lock); + spin_unlock_irqrestore(&rtc_lock, flags); return uip; } #ifdef RTC_IRQ /* - * A very tiny interrupt handler. It runs with SA_INTERRUPT set, + * A very tiny interrupt handler. It runs with interrupts disabled, * but there is possibility of conflicting with the set_rtc_mmss() * call (the rtc irq and the timer irq can easily run at the same * time in two different CPUs). So we need to serialize @@ -230,7 +236,7 @@ static inline unsigned char rtc_is_updating(void) * (See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.) */ -irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t rtc_interrupt(int irq, void *dev_id) { /* * Can be an alarm interrupt, update complete interrupt, @@ -239,7 +245,7 @@ irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) * the last read in the remainder of rtc_irq_data. */ - spin_lock (&rtc_lock); + spin_lock(&rtc_lock); rtc_irq_data += 0x100; rtc_irq_data &= ~0xff; if (is_hpet_enabled()) { @@ -256,16 +262,16 @@ irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (rtc_status & RTC_TIMER_ON) mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100); - spin_unlock (&rtc_lock); + spin_unlock(&rtc_lock); /* Now do the rest of the actions */ spin_lock(&rtc_task_lock); if (rtc_callback) rtc_callback->func(rtc_callback->private_data); spin_unlock(&rtc_task_lock); - wake_up_interruptible(&rtc_wait); + wake_up_interruptible(&rtc_wait); - kill_fasync (&rtc_async_queue, SIGIO, POLL_IN); + kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); return IRQ_HANDLED; } @@ -274,45 +280,40 @@ irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* * sysctl-tuning infrastructure. */ -static ctl_table rtc_table[] = { +static struct ctl_table rtc_table[] = { { - .ctl_name = 1, .procname = "max-user-freq", .data = &rtc_max_user_freq, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = proc_dointvec, }, - { .ctl_name = 0 } + { } }; -static ctl_table rtc_root[] = { +static struct ctl_table rtc_root[] = { { - .ctl_name = 1, .procname = "rtc", - .maxlen = 0, .mode = 0555, .child = rtc_table, }, - { .ctl_name = 0 } + { } }; -static ctl_table dev_root[] = { +static struct ctl_table dev_root[] = { { - .ctl_name = CTL_DEV, .procname = "dev", - .maxlen = 0, .mode = 0555, .child = rtc_root, }, - { .ctl_name = 0 } + { } }; static struct ctl_table_header *sysctl_header; static int __init init_sysctl(void) { - sysctl_header = register_sysctl_table(dev_root, 0); + sysctl_header = register_sysctl_table(dev_root); return 0; } @@ -334,11 +335,19 @@ static ssize_t rtc_read(struct file *file, char __user *buf, DECLARE_WAITQUEUE(wait, current); unsigned long data; ssize_t retval; - + if (rtc_has_irq == 0) return -EIO; - if (count < sizeof(unsigned)) + /* + * Historically this function used to assume that sizeof(unsigned long) + * is the same in userspace and kernelspace. This lead to problems + * for configurations with multiple ABIs such a the MIPS o32 and 64 + * ABIs supported on the same kernel. So now we support read of both + * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the + * userspace ABI. + */ + if (count != sizeof(unsigned int) && count != sizeof(unsigned long)) return -EINVAL; add_wait_queue(&rtc_wait, &wait); @@ -349,11 +358,11 @@ static ssize_t rtc_read(struct file *file, char __user *buf, * confusing. And no, xchg() is not the answer. */ __set_current_state(TASK_INTERRUPTIBLE); - - spin_lock_irq (&rtc_lock); + + spin_lock_irq(&rtc_lock); data = rtc_irq_data; rtc_irq_data = 0; - spin_unlock_irq (&rtc_lock); + spin_unlock_irq(&rtc_lock); if (data != 0) break; @@ -369,12 +378,17 @@ static ssize_t rtc_read(struct file *file, char __user *buf, schedule(); } while (1); - if (count < sizeof(unsigned long)) - retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int); - else - retval = put_user(data, (unsigned long __user *)buf) ?: sizeof(long); + if (count == sizeof(unsigned int)) { + retval = put_user(data, + (unsigned int __user *)buf) ?: sizeof(int); + } else { + retval = put_user(data, + (unsigned long __user *)buf) ?: sizeof(long); + } + if (!retval) + retval = count; out: - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&rtc_wait, &wait); return retval; @@ -383,7 +397,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf, static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) { - struct rtc_time wtime; + struct rtc_time wtime; #ifdef RTC_IRQ if (rtc_has_irq == 0) { @@ -397,7 +411,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) case RTC_IRQP_READ: case RTC_IRQP_SET: return -EINVAL; - }; + } } #endif @@ -415,35 +429,41 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) } case RTC_PIE_OFF: /* Mask periodic int. enab. bit */ { - unsigned long flags; /* can be called from isr via rtc_control() */ - spin_lock_irqsave (&rtc_lock, flags); + /* can be called from isr via rtc_control() */ + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); mask_rtc_irq_bit_locked(RTC_PIE); if (rtc_status & RTC_TIMER_ON) { rtc_status &= ~RTC_TIMER_ON; del_timer(&rtc_irq_timer); } - spin_unlock_irqrestore (&rtc_lock, flags); + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; } case RTC_PIE_ON: /* Allow periodic ints */ { - unsigned long flags; /* can be called from isr via rtc_control() */ + /* can be called from isr via rtc_control() */ + unsigned long flags; + /* * We don't really want Joe User enabling more * than 64Hz of interrupts on a multi-user machine. */ if (!kernel && (rtc_freq > rtc_max_user_freq) && - (!capable(CAP_SYS_RESOURCE))) + (!capable(CAP_SYS_RESOURCE))) return -EACCES; - spin_lock_irqsave (&rtc_lock, flags); + spin_lock_irqsave(&rtc_lock, flags); if (!(rtc_status & RTC_TIMER_ON)) { - rtc_irq_timer.expires = jiffies + HZ/rtc_freq + 2*HZ/100; - add_timer(&rtc_irq_timer); + mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + + 2*HZ/100); rtc_status |= RTC_TIMER_ON; } set_rtc_irq_bit_locked(RTC_PIE); - spin_unlock_irqrestore (&rtc_lock, flags); + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; } case RTC_UIE_OFF: /* Mask ints from RTC updates. */ @@ -466,7 +486,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) */ memset(&wtime, 0, sizeof(struct rtc_time)); get_rtc_alm_time(&wtime); - break; + break; } case RTC_ALM_SET: /* Store a time into the alarm */ { @@ -494,16 +514,21 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) */ } if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || - RTC_ALWAYS_BCD) - { - if (sec < 60) BIN_TO_BCD(sec); - else sec = 0xff; - - if (min < 60) BIN_TO_BCD(min); - else min = 0xff; - - if (hrs < 24) BIN_TO_BCD(hrs); - else hrs = 0xff; + RTC_ALWAYS_BCD) { + if (sec < 60) + sec = bin2bcd(sec); + else + sec = 0xff; + + if (min < 60) + min = bin2bcd(min); + else + min = 0xff; + + if (hrs < 24) + hrs = bin2bcd(hrs); + else + hrs = 0xff; } CMOS_WRITE(hrs, RTC_HOURS_ALARM); CMOS_WRITE(min, RTC_MINUTES_ALARM); @@ -552,11 +577,12 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) return -EINVAL; - + if ((hrs >= 24) || (min >= 60) || (sec >= 60)) return -EINVAL; - if ((yrs -= epoch) > 255) /* They are unsigned */ + yrs -= epoch; + if (yrs > 255) /* They are unsigned */ return -EINVAL; spin_lock_irq(&rtc_lock); @@ -586,12 +612,12 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(sec); - BIN_TO_BCD(min); - BIN_TO_BCD(hrs); - BIN_TO_BCD(day); - BIN_TO_BCD(mon); - BIN_TO_BCD(yrs); + sec = bin2bcd(sec); + min = bin2bcd(min); + hrs = bin2bcd(hrs); + day = bin2bcd(day); + mon = bin2bcd(mon); + yrs = bin2bcd(yrs); } save_control = CMOS_READ(RTC_CONTROL); @@ -624,9 +650,10 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) { int tmp = 0; unsigned char val; - unsigned long flags; /* can be called from isr via rtc_control() */ + /* can be called from isr via rtc_control() */ + unsigned long flags; - /* + /* * The max we can do is 8192Hz. */ if ((arg < 2) || (arg > 8192)) @@ -635,7 +662,8 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) * We don't really want Joe User generating more * than 64Hz of interrupts on a multi-user machine. */ - if (!kernel && (arg > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE))) + if (!kernel && (arg > rtc_max_user_freq) && + !capable(CAP_SYS_RESOURCE)) return -EACCES; while (arg > (1<<tmp)) @@ -647,12 +675,13 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) if (arg != (1<<tmp)) return -EINVAL; + rtc_freq = arg; + spin_lock_irqsave(&rtc_lock, flags); if (hpet_set_periodic_freq(arg)) { spin_unlock_irqrestore(&rtc_lock, flags); return 0; } - rtc_freq = arg; val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0; val |= (16 - tmp); @@ -663,11 +692,11 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) #endif case RTC_EPOCH_READ: /* Read the epoch. */ { - return put_user (epoch, (unsigned long __user *)arg); + return put_user(epoch, (unsigned long __user *)arg); } case RTC_EPOCH_SET: /* Set the epoch. */ { - /* + /* * There were no RTC clocks before 1900. */ if (arg < 1900) @@ -682,13 +711,15 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) default: return -ENOTTY; } - return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; + return copy_to_user((void __user *)arg, + &wtime, sizeof wtime) ? -EFAULT : 0; } -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - return rtc_do_ioctl(cmd, arg, 0); + long ret; + ret = rtc_do_ioctl(cmd, arg, 0); + return ret; } /* @@ -696,31 +727,27 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, * Also clear the previous interrupt data on an open, and clean * up things on a close. */ - -/* We use rtc_lock to protect against concurrent opens. So the BKL is not - * needed here. Or anywhere else in this driver. */ static int rtc_open(struct inode *inode, struct file *file) { - spin_lock_irq (&rtc_lock); + spin_lock_irq(&rtc_lock); - if(rtc_status & RTC_IS_OPEN) + if (rtc_status & RTC_IS_OPEN) goto out_busy; rtc_status |= RTC_IS_OPEN; rtc_irq_data = 0; - spin_unlock_irq (&rtc_lock); + spin_unlock_irq(&rtc_lock); return 0; out_busy: - spin_unlock_irq (&rtc_lock); + spin_unlock_irq(&rtc_lock); return -EBUSY; } -static int rtc_fasync (int fd, struct file *filp, int on) - +static int rtc_fasync(int fd, struct file *filp, int on) { - return fasync_helper (fd, filp, on, &rtc_async_queue); + return fasync_helper(fd, filp, on, &rtc_async_queue); } static int rtc_release(struct inode *inode, struct file *file) @@ -751,21 +778,18 @@ static int rtc_release(struct inode *inode, struct file *file) } spin_unlock_irq(&rtc_lock); - if (file->f_flags & FASYNC) { - rtc_fasync (-1, file, 0); - } no_irq: #endif - spin_lock_irq (&rtc_lock); + spin_lock_irq(&rtc_lock); rtc_irq_data = 0; rtc_status &= ~RTC_IS_OPEN; - spin_unlock_irq (&rtc_lock); + spin_unlock_irq(&rtc_lock); + return 0; } #ifdef RTC_IRQ -/* Called without the kernel lock - fine */ static unsigned int rtc_poll(struct file *file, poll_table *wait) { unsigned long l; @@ -775,9 +799,9 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait) poll_wait(file, &rtc_wait, wait); - spin_lock_irq (&rtc_lock); + spin_lock_irq(&rtc_lock); l = rtc_irq_data; - spin_unlock_irq (&rtc_lock); + spin_unlock_irq(&rtc_lock); if (l != 0) return POLLIN | POLLRDNORM; @@ -785,14 +809,6 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait) } #endif -/* - * exported stuffs - */ - -EXPORT_SYMBOL(rtc_register); -EXPORT_SYMBOL(rtc_unregister); -EXPORT_SYMBOL(rtc_control); - int rtc_register(rtc_task_t *task) { #ifndef RTC_IRQ @@ -818,6 +834,7 @@ int rtc_register(rtc_task_t *task) return 0; #endif } +EXPORT_SYMBOL(rtc_register); int rtc_unregister(rtc_task_t *task) { @@ -834,7 +851,7 @@ int rtc_unregister(rtc_task_t *task) return -ENXIO; } rtc_callback = NULL; - + /* disable controls */ if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) { tmp = CMOS_READ(RTC_CONTROL); @@ -854,6 +871,7 @@ int rtc_unregister(rtc_task_t *task) return 0; #endif } +EXPORT_SYMBOL(rtc_unregister); int rtc_control(rtc_task_t *task, unsigned int cmd, unsigned long arg) { @@ -872,20 +890,20 @@ int rtc_control(rtc_task_t *task, unsigned int cmd, unsigned long arg) return rtc_do_ioctl(cmd, arg, 1); #endif } - +EXPORT_SYMBOL(rtc_control); /* * The various file operations we support. */ -static struct file_operations rtc_fops = { +static const struct file_operations rtc_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .read = rtc_read, #ifdef RTC_IRQ .poll = rtc_poll, #endif - .ioctl = rtc_ioctl, + .unlocked_ioctl = rtc_ioctl, .open = rtc_open, .release = rtc_release, .fasync = rtc_fasync, @@ -897,60 +915,80 @@ static struct miscdevice rtc_dev = { .fops = &rtc_fops, }; -static struct file_operations rtc_proc_fops = { - .owner = THIS_MODULE, - .open = rtc_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, +#ifdef CONFIG_PROC_FS +static const struct file_operations rtc_proc_fops = { + .owner = THIS_MODULE, + .open = rtc_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; - -#if defined(RTC_IRQ) && !defined(__sparc__) -static irqreturn_t (*rtc_int_handler_ptr)(int irq, void *dev_id, struct pt_regs *regs); #endif +static resource_size_t rtc_size; + +static struct resource * __init rtc_request_region(resource_size_t size) +{ + struct resource *r; + + if (RTC_IOMAPPED) + r = request_region(RTC_PORT(0), size, "rtc"); + else + r = request_mem_region(RTC_PORT(0), size, "rtc"); + + if (r) + rtc_size = size; + + return r; +} + +static void rtc_release_region(void) +{ + if (RTC_IOMAPPED) + release_region(RTC_PORT(0), rtc_size); + else + release_mem_region(RTC_PORT(0), rtc_size); +} + static int __init rtc_init(void) { +#ifdef CONFIG_PROC_FS struct proc_dir_entry *ent; +#endif #if defined(__alpha__) || defined(__mips__) unsigned int year, ctrl; char *guess = NULL; #endif -#ifdef __sparc__ - struct linux_ebus *ebus; - struct linux_ebus_device *edev; -#ifdef __sparc_v9__ - struct sparc_isa_bridge *isa_br; - struct sparc_isa_device *isa_dev; +#ifdef CONFIG_SPARC32 + struct device_node *ebus_dp; + struct platform_device *op; +#else + void *r; +#ifdef RTC_IRQ + irq_handler_t rtc_int_handler_ptr; #endif #endif -#ifdef __sparc__ - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if(strcmp(edev->prom_name, "rtc") == 0) { - rtc_port = edev->resource[0].start; - rtc_irq = edev->irqs[0]; - goto found; - } - } - } -#ifdef __sparc_v9__ - for_each_isa(isa_br) { - for_each_isadev(isa_dev, isa_br) { - if (strcmp(isa_dev->prom_name, "rtc") == 0) { - rtc_port = isa_dev->resource.start; - rtc_irq = isa_dev->irq; - goto found; +#ifdef CONFIG_SPARC32 + for_each_node_by_name(ebus_dp, "ebus") { + struct device_node *dp; + for (dp = ebus_dp; dp; dp = dp->sibling) { + if (!strcmp(dp->name, "rtc")) { + op = of_find_device_by_node(dp); + if (op) { + rtc_port = op->resource[0].start; + rtc_irq = op->irqs[0]; + goto found; + } } } } -#endif + rtc_has_irq = 0; printk(KERN_ERR "rtc_init: no PC rtc found\n"); return -EIO; found: - if (rtc_irq == PCI_IRQ_NONE) { + if (!rtc_irq) { rtc_has_irq = 0; goto no_irq; } @@ -959,76 +997,96 @@ found: * XXX Interrupt pin #7 in Espresso is shared between RTC and * PCI Slot 2 INTA# (and some INTx# in Slot 1). */ - if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) { - /* - * Standard way for sparc to print irq's is to use - * __irq_itoa(). I think for EBus it's ok to use %d. - */ + if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", + (void *)&rtc_port)) { + rtc_has_irq = 0; printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq); return -EIO; } no_irq: #else - if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc")) { - printk(KERN_ERR "rtc: I/O port %d is not free.\n", RTC_PORT (0)); + r = rtc_request_region(RTC_IO_EXTENT); + + /* + * If we've already requested a smaller range (for example, because + * PNPBIOS or ACPI told us how the device is configured), the request + * above might fail because it's too big. + * + * If so, request just the range we actually use. + */ + if (!r) + r = rtc_request_region(RTC_IO_EXTENT_USED); + if (!r) { +#ifdef RTC_IRQ + rtc_has_irq = 0; +#endif + printk(KERN_ERR "rtc: I/O resource %lx is not free.\n", + (long)(RTC_PORT(0))); return -EIO; } #ifdef RTC_IRQ if (is_hpet_enabled()) { + int err; + rtc_int_handler_ptr = hpet_rtc_interrupt; + err = hpet_register_irq_handler(rtc_interrupt); + if (err != 0) { + printk(KERN_WARNING "hpet_register_irq_handler failed " + "in rtc_init()."); + return err; + } } else { rtc_int_handler_ptr = rtc_interrupt; } - if(request_irq(RTC_IRQ, rtc_int_handler_ptr, SA_INTERRUPT, "rtc", NULL)) { + if (request_irq(RTC_IRQ, rtc_int_handler_ptr, 0, "rtc", NULL)) { /* Yeah right, seeing as irq 8 doesn't even hit the bus. */ + rtc_has_irq = 0; printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ); - release_region(RTC_PORT(0), RTC_IO_EXTENT); + rtc_release_region(); + return -EIO; } hpet_rtc_timer_init(); #endif -#endif /* __sparc__ vs. others */ +#endif /* CONFIG_SPARC32 vs. others */ if (misc_register(&rtc_dev)) { #ifdef RTC_IRQ free_irq(RTC_IRQ, NULL); + hpet_unregister_irq_handler(rtc_interrupt); + rtc_has_irq = 0; #endif - release_region(RTC_PORT(0), RTC_IO_EXTENT); + rtc_release_region(); return -ENODEV; } - ent = create_proc_entry("driver/rtc", 0, NULL); - if (!ent) { -#ifdef RTC_IRQ - free_irq(RTC_IRQ, NULL); +#ifdef CONFIG_PROC_FS + ent = proc_create("driver/rtc", 0, NULL, &rtc_proc_fops); + if (!ent) + printk(KERN_WARNING "rtc: Failed to register with procfs.\n"); #endif - release_region(RTC_PORT(0), RTC_IO_EXTENT); - misc_deregister(&rtc_dev); - return -ENOMEM; - } - ent->proc_fops = &rtc_proc_fops; #if defined(__alpha__) || defined(__mips__) rtc_freq = HZ; - + /* Each operating system on an Alpha uses its own epoch. Let's try to guess which one we are using now. */ - + if (rtc_is_updating() != 0) msleep(20); - + spin_lock_irq(&rtc_lock); year = CMOS_READ(RTC_YEAR); ctrl = CMOS_READ(RTC_CONTROL); spin_unlock_irq(&rtc_lock); - + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(year); /* This should never happen... */ - + year = bcd2bin(year); /* This should never happen... */ + if (year < 20) { epoch = 2000; guess = "SRM (post-2000)"; @@ -1049,19 +1107,22 @@ no_irq: #endif } if (guess) - printk(KERN_INFO "rtc: %s epoch (%lu) detected\n", guess, epoch); + printk(KERN_INFO "rtc: %s epoch (%lu) detected\n", + guess, epoch); #endif #ifdef RTC_IRQ if (rtc_has_irq == 0) goto no_irq2; - init_timer(&rtc_irq_timer); - rtc_irq_timer.function = rtc_dropped_irq; spin_lock_irq(&rtc_lock); rtc_freq = 1024; if (!hpet_set_periodic_freq(rtc_freq)) { - /* Initialize periodic freq. to CMOS reset default, which is 1024Hz */ - CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), RTC_FREQ_SELECT); + /* + * Initialize periodic frequency to CMOS reset default, + * which is 1024Hz + */ + CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), + RTC_FREQ_SELECT); } spin_unlock_irq(&rtc_lock); no_irq2: @@ -1074,22 +1135,24 @@ no_irq2: return 0; } -static void __exit rtc_exit (void) +static void __exit rtc_exit(void) { cleanup_sysctl(); - remove_proc_entry ("driver/rtc", NULL); + remove_proc_entry("driver/rtc", NULL); misc_deregister(&rtc_dev); -#ifdef __sparc__ +#ifdef CONFIG_SPARC32 if (rtc_has_irq) - free_irq (rtc_irq, &rtc_port); + free_irq(rtc_irq, &rtc_port); #else - release_region (RTC_PORT (0), RTC_IO_EXTENT); + rtc_release_region(); #ifdef RTC_IRQ - if (rtc_has_irq) - free_irq (RTC_IRQ, NULL); + if (rtc_has_irq) { + free_irq(RTC_IRQ, NULL); + hpet_unregister_irq_handler(hpet_rtc_interrupt); + } #endif -#endif /* __sparc__ */ +#endif /* CONFIG_SPARC32 */ } module_init(rtc_init); @@ -1097,14 +1160,14 @@ module_exit(rtc_exit); #ifdef RTC_IRQ /* - * At IRQ rates >= 4096Hz, an interrupt may get lost altogether. + * At IRQ rates >= 4096Hz, an interrupt may get lost altogether. * (usually during an IDE disk interrupt, with IRQ unmasking off) * Since the interrupt handler doesn't get called, the IRQ status * byte doesn't get read, and the RTC stops generating interrupts. * A timer is set, and will call this function if/when that happens. * To get it out of this stalled state, we just read the status. * At least a jiffy of interrupts (rtc_freq/HZ) will have been lost. - * (You *really* shouldn't be trying to use a non-realtime system + * (You *really* shouldn't be trying to use a non-realtime system * for something that requires a steady > 1KHz signal anyways.) */ @@ -1112,7 +1175,7 @@ static void rtc_dropped_irq(unsigned long data) { unsigned long freq; - spin_lock_irq (&rtc_lock); + spin_lock_irq(&rtc_lock); if (hpet_rtc_dropped_irq()) { spin_unlock_irq(&rtc_lock); @@ -1131,15 +1194,17 @@ static void rtc_dropped_irq(unsigned long data) spin_unlock_irq(&rtc_lock); - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", freq); + printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + freq); /* Now we have new data */ wake_up_interruptible(&rtc_wait); - kill_fasync (&rtc_async_queue, SIGIO, POLL_IN); + kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); } #endif +#ifdef CONFIG_PROC_FS /* * Info exported via "/proc/driver/rtc". */ @@ -1224,10 +1289,11 @@ static int rtc_proc_open(struct inode *inode, struct file *file) { return single_open(file, rtc_proc_show, NULL); } +#endif -void rtc_get_rtc_time(struct rtc_time *rtc_tm) +static void rtc_get_rtc_time(struct rtc_time *rtc_tm) { - unsigned long uip_watchdog = jiffies; + unsigned long uip_watchdog = jiffies, flags; unsigned char ctrl; #ifdef CONFIG_MACH_DECSTATION unsigned int real_year; @@ -1238,15 +1304,14 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm) * can take just over 2ms. We wait 20ms. There is no need to * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. * If you need to know *exactly* when a second has started, enable - * periodic update complete interrupts, (via ioctl) and then + * periodic update complete interrupts, (via ioctl) and then * immediately read /dev/rtc which will block until you get the IRQ. * Once the read clears, read the RTC time (again via ioctl). Easy. */ - while (rtc_is_updating() != 0 && jiffies - uip_watchdog < 2*HZ/100) { - barrier(); + while (rtc_is_updating() != 0 && + time_before(jiffies, uip_watchdog + 2*HZ/100)) cpu_relax(); - } /* * Only the values that we read from the RTC are set. We leave @@ -1254,7 +1319,7 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm) * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is * only updated by the RTC when initially set to a non-zero value. */ - spin_lock_irq(&rtc_lock); + spin_lock_irqsave(&rtc_lock, flags); rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS); rtc_tm->tm_min = CMOS_READ(RTC_MINUTES); rtc_tm->tm_hour = CMOS_READ(RTC_HOURS); @@ -1268,17 +1333,16 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm) real_year = CMOS_READ(RTC_DEC_YEAR); #endif ctrl = CMOS_READ(RTC_CONTROL); - spin_unlock_irq(&rtc_lock); - - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(rtc_tm->tm_sec); - BCD_TO_BIN(rtc_tm->tm_min); - BCD_TO_BIN(rtc_tm->tm_hour); - BCD_TO_BIN(rtc_tm->tm_mday); - BCD_TO_BIN(rtc_tm->tm_mon); - BCD_TO_BIN(rtc_tm->tm_year); - BCD_TO_BIN(rtc_tm->tm_wday); + spin_unlock_irqrestore(&rtc_lock, flags); + + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); + rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); + rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); + rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); + rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); + rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); + rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday); } #ifdef CONFIG_MACH_DECSTATION @@ -1289,7 +1353,8 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm) * Account for differences between how the RTC uses the values * and how they are defined in a struct rtc_time; */ - if ((rtc_tm->tm_year += (epoch - 1900)) <= 69) + rtc_tm->tm_year += epoch - 1900; + if (rtc_tm->tm_year <= 69) rtc_tm->tm_year += 100; rtc_tm->tm_mon--; @@ -1310,11 +1375,10 @@ static void get_rtc_alm_time(struct rtc_time *alm_tm) ctrl = CMOS_READ(RTC_CONTROL); spin_unlock_irq(&rtc_lock); - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(alm_tm->tm_sec); - BCD_TO_BIN(alm_tm->tm_min); - BCD_TO_BIN(alm_tm->tm_hour); + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec); + alm_tm->tm_min = bcd2bin(alm_tm->tm_min); + alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); } } |