diff options
Diffstat (limited to 'drivers/char/mxser.c')
| -rw-r--r-- | drivers/char/mxser.c | 3139 |
1 files changed, 0 insertions, 3139 deletions
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c deleted file mode 100644 index ea725a9964e..00000000000 --- a/drivers/char/mxser.c +++ /dev/null @@ -1,3139 +0,0 @@ -/* - * mxser.c -- MOXA Smartio/Industio family multiport serial driver. - * - * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw). - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Original release 10/26/00 - * - * 02/06/01 Support MOXA Industio family boards. - * 02/06/01 Support TIOCGICOUNT. - * 02/06/01 Fix the problem for connecting to serial mouse. - * 02/06/01 Fix the problem for H/W flow control. - * 02/06/01 Fix the compling warning when CONFIG_PCI - * don't be defined. - * - * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. - * - Fixed x86_64 cleanness - * - Fixed sleep with spinlock held in mxser_send_break - */ - - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/autoconf.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/gfp.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/smp_lock.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/bitops.h> -#include <asm/uaccess.h> - -#include "mxser.h" - -#define MXSER_VERSION "1.8" -#define MXSERMAJOR 174 -#define MXSERCUMAJOR 175 - -#define MXSER_EVENT_TXLOW 1 -#define MXSER_EVENT_HANGUP 2 - -#define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS 32 /* Max. ports */ -#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_ISR_PASS_LIMIT 256 - -#define MXSER_ERR_IOADDR -1 -#define MXSER_ERR_IRQ -2 -#define MXSER_ERR_IRQ_CONFLIT -3 -#define MXSER_ERR_VECTOR -4 - -#define SERIAL_TYPE_NORMAL 1 -#define SERIAL_TYPE_CALLOUT 2 - -#define WAKEUP_CHARS 256 - -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E - -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|IXON|IXOFF)) - -#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT) - -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 - -enum { - MXSER_BOARD_C168_ISA = 1, - MXSER_BOARD_C104_ISA, - MXSER_BOARD_CI104J, - MXSER_BOARD_C168_PCI, - MXSER_BOARD_C104_PCI, - MXSER_BOARD_C102_ISA, - MXSER_BOARD_CI132, - MXSER_BOARD_CI134, - MXSER_BOARD_CP132, - MXSER_BOARD_CP114, - MXSER_BOARD_CT114, - MXSER_BOARD_CP102, - MXSER_BOARD_CP104U, - MXSER_BOARD_CP168U, - MXSER_BOARD_CP132U, - MXSER_BOARD_CP134U, - MXSER_BOARD_CP104JU, - MXSER_BOARD_RC7000, - MXSER_BOARD_CP118U, - MXSER_BOARD_CP102UL, - MXSER_BOARD_CP102U, -}; - -static char *mxser_brdname[] = { - "C168 series", - "C104 series", - "CI-104J series", - "C168H/PCI series", - "C104H/PCI series", - "C102 series", - "CI-132 series", - "CI-134 series", - "CP-132 series", - "CP-114 series", - "CT-114 series", - "CP-102 series", - "CP-104U series", - "CP-168U series", - "CP-132U series", - "CP-134U series", - "CP-104JU series", - "Moxa UC7000 Serial", - "CP-118U series", - "CP-102UL series", - "CP-102U series", -}; - -static int mxser_numports[] = { - 8, // C168-ISA - 4, // C104-ISA - 4, // CI104J - 8, // C168-PCI - 4, // C104-PCI - 2, // C102-ISA - 2, // CI132 - 4, // CI134 - 2, // CP132 - 4, // CP114 - 4, // CT114 - 2, // CP102 - 4, // CP104U - 8, // CP168U - 2, // CP132U - 4, // CP134U - 4, // CP104JU - 8, // RC7000 - 8, // CP118U - 2, // CP102UL - 2, // CP102U -}; - -#define UART_TYPE_NUM 2 - -static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = { - MOXA_MUST_MU150_HWID, - MOXA_MUST_MU860_HWID -}; - -// This is only for PCI -#define UART_INFO_NUM 3 -struct mxpciuart_info { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; -}; - -static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} -}; - - -#ifdef CONFIG_PCI - -static struct pci_device_id mxser_pcibrds[] = { - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - - -#endif - -typedef struct _moxa_pci_info { - unsigned short busNum; - unsigned short devNum; - struct pci_dev *pdev; // add by Victor Yu. 06-23-2003 -} moxa_pci_info; - -static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; -static int ttymajor = MXSERMAJOR; -static int calloutmajor = MXSERCUMAJOR; -static int verbose = 0; - -/* Variables for insmod */ - -MODULE_AUTHOR("Casper Yang"); -MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -MODULE_PARM(ioaddr, "1-4i"); -MODULE_PARM(ttymajor, "i"); -MODULE_PARM(calloutmajor, "i"); -MODULE_PARM(verbose, "i"); -MODULE_LICENSE("GPL"); - -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; -struct mxser_hwconf { - int board_type; - int ports; - int irq; - int vector; - int vector_mask; - int uart_type; - int ioaddr[MXSER_PORTS_PER_BOARD]; - int baud_base[MXSER_PORTS_PER_BOARD]; - moxa_pci_info pciInfo; - int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002 - int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 09-04-2002 - int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 01-05-2004 -}; - -struct mxser_struct { - int port; - int base; /* port base address */ - int irq; /* port using irq no. */ - int vector; /* port irq vector */ - int vectormask; /* port vector mask */ - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ - int flags; /* defined in tty.h */ - int type; /* UART type */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - int custom_divisor; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - unsigned long event; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - long session; /* Session of opening process */ - long pgrp; /* pgrp of opening process */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - struct work_struct tqueue; - struct termios normal_termios; - struct termios callout_termios; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t delta_msr_wait; - struct async_icount icount; /* kernel counters for the 4 input interrupts */ - int timeout; - int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002 - int MaxCanSetBaudRate; // add by Victor Yu. 09-04-2002 - int opmode_ioaddr; // add by Victor Yu. 01-05-2004 - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - long realbaud; - struct mxser_mon mon_data; - unsigned char err_shadow; - spinlock_t slock; -}; - - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_mstatus GMStatus[MXSER_PORTS]; - -static int mxserBoardCAP[MXSER_BOARDS] = { - 0, 0, 0, 0 - /* 0x180, 0x280, 0x200, 0x320 */ -}; - -static struct tty_driver *mxvar_sdriver; -static struct mxser_struct mxvar_table[MXSER_PORTS]; -static struct tty_struct *mxvar_tty[MXSER_PORTS + 1]; -static struct termios *mxvar_termios[MXSER_PORTS + 1]; -static struct termios *mxvar_termios_locked[MXSER_PORTS + 1]; -static struct mxser_log mxvar_log; -static int mxvar_diagflag; -static unsigned char mxser_msr[MXSER_PORTS + 1]; -static struct mxser_mon_ext mon_data_ext; -static int mxser_set_baud_method[MXSER_PORTS + 1]; -static spinlock_t gm_lock; - -/* - * This is used to figure out the divisor speeds and the timeouts - */ - -static struct mxser_hwconf mxsercfg[MXSER_BOARDS]; - -/* - * static functions: - */ - -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf); -static int mxser_init(void); - -//static void mxser_poll(unsigned long); -static int mxser_get_ISA_conf(int, struct mxser_hwconf *); -static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *); -static void mxser_do_softint(void *); -static int mxser_open(struct tty_struct *, struct file *); -static void mxser_close(struct tty_struct *, struct file *); -static int mxser_write(struct tty_struct *, const unsigned char *, int); -static int mxser_write_room(struct tty_struct *); -static void mxser_flush_buffer(struct tty_struct *); -static int mxser_chars_in_buffer(struct tty_struct *); -static void mxser_flush_chars(struct tty_struct *); -static void mxser_put_char(struct tty_struct *, unsigned char); -static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong); -static int mxser_ioctl_special(unsigned int, void __user *); -static void mxser_throttle(struct tty_struct *); -static void mxser_unthrottle(struct tty_struct *); -static void mxser_set_termios(struct tty_struct *, struct termios *); -static void mxser_stop(struct tty_struct *); -static void mxser_start(struct tty_struct *); -static void mxser_hangup(struct tty_struct *); -static void mxser_rs_break(struct tty_struct *, int); -static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *); -static void mxser_receive_chars(struct mxser_struct *, int *); -static void mxser_transmit_chars(struct mxser_struct *); -static void mxser_check_modem_status(struct mxser_struct *, int); -static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *); -static int mxser_startup(struct mxser_struct *); -static void mxser_shutdown(struct mxser_struct *); -static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios); -static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *); -static void mxser_send_break(struct mxser_struct *, int); -static int mxser_tiocmget(struct tty_struct *, struct file *); -static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int mxser_set_baud(struct mxser_struct *info, long newspd); -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout); - -static void mxser_startrx(struct tty_struct *tty); -static void mxser_stoprx(struct tty_struct *tty); - - -static int CheckIsMoxaMust(int io) -{ - u8 oldmcr, hwid; - int i; - - outb(0, io + UART_LCR); - DISABLE_MOXA_MUST_ENCHANCE_MODE(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - SET_MOXA_MUST_XON1_VALUE(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return (MOXA_OTHER_UART); - } - - GET_MOXA_MUST_HARDWARE_ID(io, &hwid); - for (i = 0; i < UART_TYPE_NUM; i++) { - if (hwid == Gmoxa_uart_id[i]) - return (int) hwid; - } - return MOXA_OTHER_UART; -} - -// above is modified by Victor Yu. 08-15-2002 - -static struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -}; - -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ - -static int __init mxser_module_init(void) -{ - int ret; - - if (verbose) - printk(KERN_DEBUG "Loading module mxser ...\n"); - ret = mxser_init(); - if (verbose) - printk(KERN_DEBUG "Done.\n"); - return ret; -} - -static void __exit mxser_module_exit(void) -{ - int i, err; - - if (verbose) - printk(KERN_DEBUG "Unloading module mxser ...\n"); - - err = tty_unregister_driver(mxvar_sdriver); - if (!err) - put_tty_driver(mxvar_sdriver); - else - printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n"); - - - for (i = 0; i < MXSER_BOARDS; i++) { - struct pci_dev *pdev; - - if (mxsercfg[i].board_type == -1) - continue; - else { - pdev = mxsercfg[i].pciInfo.pdev; - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - if (pdev != NULL) { //PCI - release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); - release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3)); - } else { - release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports); - release_region(mxsercfg[i].vector, 1); - } - } - } - if (verbose) - printk(KERN_DEBUG "Done.\n"); - -} - -static void process_txrx_fifo(struct mxser_struct *info) -{ - int i; - - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else { - for (i = 0; i < UART_INFO_NUM; i++) { - if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } - } - } -} - -static int mxser_initbrd(int board, struct mxser_hwconf *hwconf) -{ - struct mxser_struct *info; - int retval; - int i, n; - - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; - /*if (verbose) */ { - printk(KERN_DEBUG " ttyM%d - ttyM%d ", n, n + hwconf->ports - 1); - printk(" max. baud rate = %d bps.\n", hwconf->MaxCanSetBaudRate[0]); - } - - for (i = 0; i < hwconf->ports; i++, n++, info++) { - info->port = n; - info->base = hwconf->ioaddr[i]; - info->irq = hwconf->irq; - info->vector = hwconf->vector; - info->vectormask = hwconf->vector_mask; - info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; // add by Victor Yu. 01-05-2004 - info->stop_rx = 0; - info->ldisc_stop_rx = 0; - - info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag; - //Enhance mode enabled here - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { - ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base); - } - - info->flags = ASYNC_SHARE_IRQ; - info->type = hwconf->uart_type; - info->baud_base = hwconf->baud_base[i]; - - info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i]; - - process_txrx_fifo(info); - - - info->custom_divisor = hwconf->baud_base[i] * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; - INIT_WORK(&info->tqueue, mxser_do_softint, info); - info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - } - /* - * Allocate the IRQ if necessary - */ - - - /* before set INT ISR, disable all int */ - for (i = 0; i < hwconf->ports; i++) { - outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, hwconf->ioaddr[i] + UART_IER); - } - - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; - - retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), "mxser", info); - if (retval) { - printk(KERN_ERR "Board %d: %s", board, mxser_brdname[hwconf->board_type - 1]); - printk(" Request irq fail,IRQ (%d) may be conflit with another device.\n", info->irq); - return retval; - } - return 0; -} - - -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf) -{ - mxsercfg[board] = *hwconf; -} - -#ifdef CONFIG_PCI -static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf) -{ - int i, j; -// unsigned int val; - unsigned int ioaddress; - struct pci_dev *pdev = hwconf->pciInfo.pdev; - - //io address - hwconf->board_type = board_type; - hwconf->ports = mxser_numports[board_type - 1]; - ioaddress = pci_resource_start(pdev, 2); - request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), "mxser(IO)"); - - for (i = 0; i < hwconf->ports; i++) { - hwconf->ioaddr[i] = ioaddress + 8 * i; - } - - //vector - ioaddress = pci_resource_start(pdev, 3); - request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), "mxser(vector)"); - hwconf->vector = ioaddress; - - //irq - hwconf->irq = hwconf->pciInfo.pdev->irq; - - hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]); - hwconf->uart_type = PORT_16550A; - hwconf->vector_mask = 0; - - - for (i = 0; i < hwconf->ports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) { - hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud; - - //exception....CP-102 - if (board_type == MXSER_BOARD_CP102) - hwconf->MaxCanSetBaudRate[i] = 921600; - break; - } - } - } - - if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < hwconf->ports; i++) { - if (i < 4) - hwconf->opmode_ioaddr[i] = ioaddress + 4; - else - hwconf->opmode_ioaddr[i] = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); // default set to RS232 mode - outb(0, ioaddress + 0x0c); //default set to RS232 mode - } - - for (i = 0; i < hwconf->ports; i++) { - hwconf->vector_mask |= (1 << i); - hwconf->baud_base[i] = 921600; - } - return (0); -} -#endif - -static int mxser_init(void) -{ - int i, m, retval, b, n; - struct pci_dev *pdev = NULL; - int index; - unsigned char busnum, devnum; - struct mxser_hwconf hwconf; - - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - spin_lock_init(&gm_lock); - - for (i = 0; i < MXSER_BOARDS; i++) { - mxsercfg[i].board_type = -1; - } - - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", MXSER_VERSION); - - /* Initialize the tty_driver structure */ - memset(mxvar_sdriver, 0, sizeof(struct tty_driver)); - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyM"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(mxvar_sdriver, &mxser_ops); - mxvar_sdriver->ttys = mxvar_tty; - mxvar_sdriver->termios = mxvar_termios; - mxvar_sdriver->termios_locked = mxvar_termios_locked; - - mxvar_diagflag = 0; - memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct)); - memset(&mxvar_log, 0, sizeof(struct mxser_log)); - - memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1)); - memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext)); - memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1)); - memset(&hwconf, 0, sizeof(struct mxser_hwconf)); - - m = 0; - /* Start finding ISA boards here */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - if (!(cap = mxserBoardCAP[b])) - continue; - - retval = mxser_get_ISA_conf(cap, &hwconf); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); - - continue; - } - - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; - - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; - - - m++; - } - - /* Start finding ISA boards from module arg */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - if (!(cap = ioaddr[b])) - continue; - - retval = mxser_get_ISA_conf(cap, &hwconf); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); - - continue; - } - - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; - - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; - - m++; - } - - /* start finding PCI board here */ -#ifdef CONFIG_PCI - n = ARRAY_SIZE(mxser_pcibrds) - 1; - index = 0; - b = 0; - while (b < n) { - pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev); - if (pdev == NULL) { - b++; - continue; - } - hwconf.pciInfo.busNum = busnum = pdev->bus->number; - hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3; - hwconf.pciInfo.pdev = pdev; - printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], busnum, devnum >> 3); - index++; - if (m >= MXSER_BOARDS) { - printk(KERN_ERR "Too many Smartio/Industio family boards find (maximum %d),board not configured\n", MXSER_BOARDS); - } else { - if (pci_enable_device(pdev)) { - printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); - continue; - } - retval = mxser_get_PCI_conf(busnum, devnum, (int) mxser_pcibrds[b].driver_data, &hwconf); - if (retval < 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); - continue; - } - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; - m++; - } - } -#endif - - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family driver !\n"); - put_tty_driver(mxvar_sdriver); - - for (i = 0; i < MXSER_BOARDS; i++) { - if (mxsercfg[i].board_type == -1) - continue; - else { - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - //todo: release io, vector - } - } - return retval; - } - - return 0; -} - -static void mxser_do_softint(void *private_) -{ - struct mxser_struct *info = (struct mxser_struct *) private_; - struct tty_struct *tty; - - tty = info->tty; - - if (tty) { - if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) - tty_wakeup(tty); - if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) - tty_hangup(tty); - } -} - -static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info) -{ - unsigned char status = 0; - - status = inb(baseaddr + UART_MSR); - - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; - - return status; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_struct *info; - int retval, line; - - /* initialize driver_data in case something fails */ - tty->driver_data = NULL; - - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = mxvar_table + line; - if (!info->base) - return (-ENODEV); - - tty->driver_data = info; - info->tty = tty; - /* - * Start up serial port - */ - retval = mxser_startup(info); - if (retval) - return (retval); - - retval = mxser_block_til_ready(tty, filp, info); - if (retval) - return (retval); - - info->count++; - - if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - if (tty->driver->subtype == SERIAL_TYPE_NORMAL) - *tty->termios = info->normal_termios; - else - *tty->termios = info->callout_termios; - mxser_change_speed(info, NULL); - } - - info->session = current->signal->session; - info->pgrp = process_group(current); - clear_bit(TTY_DONT_FLIP, &tty->flags); - - //status = mxser_get_msr(info->base, 0, info->port); - //mxser_check_modem_status(info, status); - -/* unmark here for very high baud rate (ex. 921600 bps) used -*/ - tty->low_latency = 1; - return 0; -} - -/* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - */ -static void mxser_close(struct tty_struct *tty, struct file *filp) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - - unsigned long timeout; - unsigned long flags; - struct tty_ldisc *ld; - - if (tty->index == MXSER_PORTS) - return; - if (!info) - return; - - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; tty->count is 1, " "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for ttys%d: %d\n", info->port, info->count); - info->count = 0; - } - if (info->count) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - info->flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->IER &= ~UART_IER_RLSI; - if (info->IsMoxaMustChipFlag) - info->IER &= ~MOXA_MUST_RECV_ISR; -/* by William - info->read_status_mask &= ~UART_LSR_DR; -*/ - if (info->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->base + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } - } - mxser_shutdown(info); - - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - - ld = tty_ldisc_ref(tty); - if (ld) { - if(ld->flush_buffer) - ld->flush_buffer(tty); - tty_ldisc_deref(ld); - } - - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - -} - -static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int c, total = 0; - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - if (!tty || !info->xmit_buf) - return (0); - - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - - } - - if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { - if (!tty->hw_stopped || (info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { - spin_lock_irqsave(&info->slock, flags); - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return total; -} - -static void mxser_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - if (!tty || !info->xmit_buf) - return; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped && !(info->IER & UART_IER_THRI)) { - if (!tty->hw_stopped || (info->type == PORT_16550A) || info->IsMoxaMustChipFlag) { - spin_lock_irqsave(&info->slock, flags); - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } -} - - -static void mxser_flush_chars(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf || (tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) - return; - - spin_lock_irqsave(&info->slock, flags); - - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_write_room(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - int ret; - - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return (ret); -} - -static int mxser_chars_in_buffer(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - return info->xmit_cnt; -} - -static void mxser_flush_buffer(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* below added by shinhay */ - fcr = inb(info->base + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - outb(fcr, info->base + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - /* above added by shinhay */ - - wake_up_interruptible(&tty->write_wait); - if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) - (tty->ldisc.write_wakeup) (tty); -} - -static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - int retval; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; - unsigned long templ; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if (tty->index == MXSER_PORTS) - return (mxser_ioctl_special(cmd, argp)); - - // following add by Victor Yu. 01-05-2004 - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int opmode, p; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; - - p = info->port % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && opmode != RS485_2WIRE_MODE && opmode != RS422_MODE && opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - } else { - shiftbit = p * 2; - opmode = inb(info->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - if (copy_to_user(argp, &opmode, sizeof(int))) - return -EFAULT; - } - return 0; - } - // above add by Victor Yu. 01-05-2004 - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return (-EIO); - } - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return (retval); - tty_wait_until_sent(tty, 0); - if (!arg) - mxser_send_break(info, HZ / 4); /* 1/4 second */ - return (0); - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return (retval); - tty_wait_until_sent(tty, 0); - mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - return (0); - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp); - case TIOCSSOFTCAR: - if (get_user(templ, (unsigned long __user *) argp)) - return -EFAULT; - arg = templ; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); - return (0); - case TIOCGSERIAL: - return mxser_get_serial_info(info, argp); - case TIOCSSERIAL: - return mxser_set_serial_info(info, argp); - case TIOCSERGETLSR: /* Get line status register */ - return mxser_get_lsr_info(info, argp); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT:{ - DECLARE_WAITQUEUE(wait, current); - int ret; - spin_lock_irqsave(&info->slock, flags); - cprev = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->slock, flags); - - add_wait_queue(&info->delta_msr_wait, &wait); - while (1) { - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); - - set_current_state(TASK_INTERRUPTIBLE); - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - ret = 0; - break; - } - /* see if a signal did it */ - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - cprev = cnow; - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->delta_msr_wait, &wait); - break; - } - /* NOTREACHED */ - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - p_cuser = argp; - /* modified by casper 1/11/2000 */ - if (put_user(cnow.frame, &p_cuser->frame)) - return -EFAULT; - if (put_user(cnow.brk, &p_cuser->brk)) - return -EFAULT; - if (put_user(cnow.overrun, &p_cuser->overrun)) - return -EFAULT; - if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; - if (put_user(cnow.parity, &p_cuser->parity)) - return -EFAULT; - if (put_user(cnow.rx, &p_cuser->rx)) - return -EFAULT; - if (put_user(cnow.tx, &p_cuser->tx)) - return -EFAULT; - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - -/* */ - return 0; - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *) argp); - - case MOXA_SDS_RSTICOUNTER:{ - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - return 0; - } -// (above) added by James. - case MOXA_ASPP_SETBAUD:{ - long baud; - if (get_user(baud, (long __user *) argp)) - return -EFAULT; - mxser_set_baud(info, baud); - return 0; - } - case MOXA_ASPP_GETBAUD: - if (copy_to_user(argp, &info->realbaud, sizeof(long))) - return -EFAULT; - - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; - - len = mxser_chars_in_buffer(tty); - - lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT; - - len += (lsr ? 0 : 1); - - if (copy_to_user(argp, &len, sizeof(int))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_MON:{ - int mcr, status; -// info->mon_data.ser_param = tty->termios->c_cflag; - - status = mxser_get_msr(info->base, 1, info->port, info); - mxser_check_modem_status(info, status); - - mcr = inb(info->base + UART_MCR); - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (info->tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - - if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - - } - - case MOXA_ASPP_LSTATUS:{ - if (copy_to_user(argp, &info->err_shadow, sizeof(unsigned char))) - return -EFAULT; - - info->err_shadow = 0; - return 0; - - } - case MOXA_SET_BAUD_METHOD:{ - int method; - if (get_user(method, (int __user *) argp)) - return -EFAULT; - mxser_set_baud_method[info->port] = method; - if (copy_to_user(argp, &method, sizeof(int))) - return -EFAULT; - - return 0; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -#ifndef CMSPAR -#define CMSPAR 010000000000 -#endif - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - int i, result, status; - - switch (cmd) { - case MOXA_GET_CONF: - if (copy_to_user(argp, mxsercfg, sizeof(struct mxser_hwconf) * 4)) - return -EFAULT; - return 0; - case MOXA_GET_MAJOR: - if (copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_GET_CUMAJOR: - if (copy_to_user(argp, &calloutmajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_CHKPORTENABLE: - result = 0; - for (i = 0; i < MXSER_PORTS; i++) { - if (mxvar_table[i].base) - result |= (1 << i); - } - return put_user(result, (unsigned long __user *) argp); - case MOXA_GETDATACOUNT: - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - return -EFAULT; - return (0); - case MOXA_GETMSTATUS: - for (i = 0; i < MXSER_PORTS; i++) { - GMStatus[i].ri = 0; - if (!mxvar_table[i].base) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; - } - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) - GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag; - else - GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag; - - status = inb(mxvar_table[i].base + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; - } - if (copy_to_user(argp, GMStatus, sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; - return 0; - case MOXA_ASPP_MON_EXT:{ - int status; - int opmode, p; - int shiftbit; - unsigned cflag, iflag; - - for (i = 0; i < MXSER_PORTS; i++) { - - if (!mxvar_table[i].base) - continue; - - status = mxser_get_msr(mxvar_table[i].base, 0, i, &(mxvar_table[i])); -// mxser_check_modem_status(&mxvar_table[i], status); - if (status & UART_MSR_TERI) - mxvar_table[i].icount.rng++; - if (status & UART_MSR_DDSR) - mxvar_table[i].icount.dsr++; - if (status & UART_MSR_DDCD) - mxvar_table[i].icount.dcd++; - if (status & UART_MSR_DCTS) - mxvar_table[i].icount.cts++; - - mxvar_table[i].mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt; - mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status; - mon_data_ext.baudrate[i] = mxvar_table[i].realbaud; - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) { - cflag = mxvar_table[i].normal_termios.c_cflag; - iflag = mxvar_table[i].normal_termios.c_iflag; - } else { - cflag = mxvar_table[i].tty->termios->c_cflag; - iflag = mxvar_table[i].tty->termios->c_iflag; - } - - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; - - if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; - - if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; - - if (mxvar_table[i].type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; - - p = i % 4; - shiftbit = p * 2; - opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - - mon_data_ext.iftype[i] = opmode; - - } - if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext))) - return -EFAULT; - - return 0; - - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - - -static void mxser_stoprx(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - //unsigned long flags; - - - info->ldisc_stop_rx = 1; - if (I_IXOFF(tty)) { - - //MX_LOCK(&info->slock); - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { - info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); - } else { - // above add by Victor Yu. 09-02-2002 - - info->x_char = STOP_CHAR(tty); - // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002 - outb(0, info->base + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); /* force Tx interrupt */ - } // add by Victor Yu. 09-02-2002 - //MX_UNLOCK(&info->slock); - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - //MX_LOCK(&info->slock); - info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - //MX_UNLOCK(&info->slock); - } -} - -static void mxser_startrx(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - //unsigned long flags; - - info->ldisc_stop_rx = 0; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else { - //MX_LOCK(&info->slock); - - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); - } else { - // above add by Victor Yu. 09-02-2002 - - info->x_char = START_CHAR(tty); - // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002 - outb(0, info->base + UART_IER); // add by Victor Yu. 09-02-2002 - info->IER |= UART_IER_THRI; /* force Tx interrupt */ - outb(info->IER, info->base + UART_IER); - } // add by Victor Yu. 09-02-2002 - //MX_UNLOCK(&info->slock); - } - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - //MX_LOCK(&info->slock); - info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - //MX_UNLOCK(&info->slock); - } -} - -/* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - */ -static void mxser_throttle(struct tty_struct *tty) -{ - //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data; - //unsigned long flags; - //MX_LOCK(&info->slock); - mxser_stoprx(tty); - //MX_UNLOCK(&info->slock); -} - -static void mxser_unthrottle(struct tty_struct *tty) -{ - //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data; - //unsigned long flags; - //MX_LOCK(&info->slock); - mxser_startrx(tty); - //MX_UNLOCK(&info->slock); -} - -static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - if ((tty->termios->c_cflag != old_termios->c_cflag) || (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) { - - mxser_change_speed(info, old_termios); - - if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mxser_start(tty); - } - } - -/* Handle sw stopped */ - if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) { - tty->stopped = 0; - - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { - spin_lock_irqsave(&info->slock, flags); - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - spin_unlock_irqrestore(&info->slock, flags); - } - // above add by Victor Yu. 09-02-2002 - - mxser_start(tty); - } -} - -/* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * mxser_wait_until_sent() --- wait until the transmitter is empty - */ -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long orig_jiffies, char_time; - int lsr; - - if (info->type == PORT_UNKNOWN) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif - schedule_timeout_interruptible(char_time); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - set_current_state(TASK_RUNNING); - -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - - -/* - * This routine is called by tty_hangup() when a hangup is signaled. - */ -void mxser_hangup(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - - mxser_flush_buffer(tty); - mxser_shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - - -// added by James 03-12-2004. -/* - * mxser_rs_break() --- routine which turns the break handling on or off - */ -static void mxser_rs_break(struct tty_struct *tty, int break_state) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR); - else - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -// (above) added by James. - - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - int status, iir, i; - struct mxser_struct *info; - struct mxser_struct *port; - int max, irqbits, bits, msr; - int pass_counter = 0; - int handled = IRQ_NONE; - - port = NULL; - //spin_lock(&gm_lock); - - for (i = 0; i < MXSER_BOARDS; i++) { - if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) { - port = dev_id; - break; - } - } - - if (i == MXSER_BOARDS) { - goto irq_stop; - } - if (port == 0) { - goto irq_stop; - } - max = mxser_numports[mxsercfg[i].board_type - 1]; - while (1) { - irqbits = inb(port->vector) & port->vectormask; - if (irqbits == port->vectormask) { - break; - } - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == port->vectormask) { - break; - } - if (bits & irqbits) - continue; - info = port + i; - - // following add by Victor Yu. 09-13-2002 - iir = inb(info->base + UART_IIR); - if (iir & UART_IIR_NO_INT) - continue; - iir &= MOXA_MUST_IIR_MASK; - if (!info->tty) { - status = inb(info->base + UART_LSR); - outb(0x27, info->base + UART_FCR); - inb(info->base + UART_MSR); - continue; - } - // above add by Victor Yu. 09-13-2002 - /* - if ( info->tty->flip.count < TTY_FLIPBUF_SIZE/4 ){ - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); - } - */ - - - /* mask by Victor Yu. 09-13-2002 - if ( !info->tty || - (inb(info->base + UART_IIR) & UART_IIR_NO_INT) ) - continue; - */ - /* mask by Victor Yu. 09-02-2002 - status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - - // following add by Victor Yu. 09-02-2002 - status = inb(info->base + UART_LSR); - - if (status & UART_LSR_PE) { - info->err_shadow |= NPPI_NOTIFY_PARITY; - } - if (status & UART_LSR_FE) { - info->err_shadow |= NPPI_NOTIFY_FRAMING; - } - if (status & UART_LSR_OE) { - info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN; - } - if (status & UART_LSR_BI) - info->err_shadow |= NPPI_NOTIFY_BREAK; - - if (info->IsMoxaMustChipFlag) { - /* - if ( (status & 0x02) && !(status & 0x01) ) { - outb(info->base+UART_FCR, 0x23); - continue; - } - */ - if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(info, &status); - - } else { - // above add by Victor Yu. 09-02-2002 - - status &= info->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(info, &status); - } - msr = inb(info->base + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) { - mxser_check_modem_status(info, msr); - } - // following add by Victor Yu. 09-13-2002 - if (info->IsMoxaMustChipFlag) { - if ((iir == 0x02) && (status & UART_LSR_THRE)) { - mxser_transmit_chars(info); - } - } else { - // above add by Victor Yu. 09-13-2002 - - if (status & UART_LSR_THRE) { -/* 8-2-99 by William - if ( info->x_char || (info->xmit_cnt > 0) ) -*/ - mxser_transmit_chars(info); - } - } - } - if (pass_counter++ > MXSER_ISR_PASS_LIMIT) { - break; /* Prevent infinite loops */ - } - } - - irq_stop: - //spin_unlock(&gm_lock); - return handled; -} - -static void mxser_receive_chars(struct mxser_struct *info, int *status) -{ - struct tty_struct *tty = info->tty; - unsigned char ch, gdl; - int ignored = 0; - int cnt = 0; - int recv_room; - int max = 256; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - - recv_room = tty->receive_room; - if ((recv_room == 0) && (!info->ldisc_stop_rx)) { - //mxser_throttle(tty); - mxser_stoprx(tty); - //return; - } - - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { - - if (*status & UART_LSR_SPECIAL) { - goto intr_old; - } - // following add by Victor Yu. 02-11-2004 - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && (*status & MOXA_MUST_LSR_RERR)) - goto intr_old; - // above add by Victor Yu. 02-14-2004 - if (*status & MOXA_MUST_LSR_RERR) - goto intr_old; - - gdl = inb(info->base + MOXA_MUST_GDL_REGISTER); - - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) // add by Victor Yu. 02-11-2004 - gdl &= MOXA_MUST_GDL_MASK; - if (gdl >= recv_room) { - if (!info->ldisc_stop_rx) { - //mxser_throttle(tty); - mxser_stoprx(tty); - } - //return; - } - while (gdl--) { - ch = inb(info->base + UART_RX); - tty_insert_flip_char(tty, ch, 0); - cnt++; - /* - if((cnt>=HI_WATER) && (info->stop_rx==0)){ - mxser_stoprx(tty); - info->stop_rx=1; - break; - } */ - } - goto end_intr; - } -intr_old: - // above add by Victor Yu. 09-02-2002 - - do { - if (max-- < 0) - break; - /* - if((cnt>=HI_WATER) && (info->stop_rx==0)){ - mxser_stoprx(tty); - info->stop_rx=1; - break; - } - */ - - ch = inb(info->base + UART_RX); - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ ) - outb(0x23, info->base + UART_FCR); - *status &= info->read_status_mask; - // above add by Victor Yu. 09-02-2002 - if (*status & info->ignore_status_mask) { - if (++ignored > 100) - break; - } else { - char flag = 0; - if (*status & UART_LSR_SPECIAL) { - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; -/* added by casper 1/11/2000 */ - info->icount.brk++; -/* */ - if (info->flags & ASYNC_SAK) - do_SAK(tty); - } else if (*status & UART_LSR_PE) { - flag = TTY_PARITY; -/* added by casper 1/11/2000 */ - info->icount.parity++; -/* */ - } else if (*status & UART_LSR_FE) { - flag = TTY_FRAME; -/* added by casper 1/11/2000 */ - info->icount.frame++; -/* */ - } else if (*status & UART_LSR_OE) { - flag = TTY_OVERRUN; -/* added by casper 1/11/2000 */ - info->icount.overrun++; -/* */ - } - } - tty_insert_flip_char(tty, ch, flag); - cnt++; - if (cnt >= recv_room) { - if (!info->ldisc_stop_rx) { - //mxser_throttle(tty); - mxser_stoprx(tty); - } - break; - } - - } - - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) - break; - // above add by Victor Yu. 09-02-2002 - - /* mask by Victor Yu. 09-02-2002 - *status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - // following add by Victor Yu. 09-02-2002 - *status = inb(info->base + UART_LSR); - // above add by Victor Yu. 09-02-2002 - } while (*status & UART_LSR_DR); - -end_intr: // add by Victor Yu. 09-02-2002 - - mxvar_log.rxcnt[info->port] += cnt; - info->mon_data.rxcnt += cnt; - info->mon_data.up_rxcnt += cnt; - spin_unlock_irqrestore(&info->slock, flags); - - tty_flip_buffer_push(tty); -} - -static void mxser_transmit_chars(struct mxser_struct *info) -{ - int count, cnt; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - - if (info->x_char) { - outb(info->x_char, info->base + UART_TX); - info->x_char = 0; - mxvar_log.txcnt[info->port]++; - info->mon_data.txcnt++; - info->mon_data.up_txcnt++; - -/* added by casper 1/11/2000 */ - info->icount.tx++; -/* */ - spin_unlock_irqrestore(&info->slock, flags); - return; - } - - if (info->xmit_buf == 0) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - - if ((info->xmit_cnt <= 0) || info->tty->stopped || (info->tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - return; - } - - cnt = info->xmit_cnt; - count = info->xmit_fifo_size; - do { - outb(info->xmit_buf[info->xmit_tail++], info->base + UART_TX); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--info->xmit_cnt <= 0) - break; - } while (--count > 0); - mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt); - -// added by James 03-12-2004. - info->mon_data.txcnt += (cnt - info->xmit_cnt); - info->mon_data.up_txcnt += (cnt - info->xmit_cnt); -// (above) added by James. - -/* added by casper 1/11/2000 */ - info->icount.tx += (cnt - info->xmit_cnt); -/* */ - - if (info->xmit_cnt < WAKEUP_CHARS) { - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); - } - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_check_modem_status(struct mxser_struct *info, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - info->icount.rng++; - if (status & UART_MSR_DDSR) - info->icount.dsr++; - if (status & UART_MSR_DDCD) - info->icount.dcd++; - if (status & UART_MSR_DCTS) - info->icount.cts++; - info->mon_data.modem_status = status; - wake_up_interruptible(&info->delta_msr_wait); - - - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - schedule_work(&info->tqueue); - } - - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } - } - } -} - -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return (0); - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - spin_lock_irqsave(&info->slock, flags); - if (!tty_hung_up_p(filp)) - info->count--; - spin_unlock_irqrestore(&info->slock, flags); - info->blocked_open++; - while (1) { - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ASYNC_CLOSING) && (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - if (retval) - return (retval); - info->flags |= ASYNC_NORMAL_ACTIVE; - return (0); -} - -static int mxser_startup(struct mxser_struct *info) -{ - - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return (-ENOMEM); - - spin_lock_irqsave(&info->slock, flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return (0); - } - - if (!info->base || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return (0); - } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->base + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - return (0); - } else - return (-ENODEV); - } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; -// info->IER = UART_IER_RLSI | UART_IER_RDI; - - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) - info->IER |= MOXA_MUST_IER_EGDAI; - // above add by Victor Yu. 08-30-2002 - outb(info->IER, info->base + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - spin_unlock_irqrestore(&info->slock, flags); - mxser_change_speed(info, NULL); - - info->flags |= ASYNC_INITIALIZED; - return (0); -} - -/* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void mxser_shutdown(struct mxser_struct *info) -{ - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ, if necessary - */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->base + UART_IER); - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->base + UART_MCR); - - /* clear Rx/Tx FIFO's */ - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - // above add by Victor Yu. 08-30-2002 - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->base + UART_RX); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - - // following add by Victor Yu. 09-23-2002 - if (info->IsMoxaMustChipFlag) { - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base); - } - // above add by Victor Yu. 09-23-2002 - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios) -{ - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - long baud; - unsigned long flags; - - - if (!info->tty || !info->tty->termios) - return ret; - cflag = info->tty->termios->c_cflag; - if (!(info->base)) - return ret; - - -#ifndef B921600 -#define B921600 (B460800 +1) -#endif - if (mxser_set_baud_method[info->port] == 0) { - switch (cflag & (CBAUD | CBAUDEX)) { - case B921600: - baud = 921600; - break; - case B460800: - baud = 460800; - break; - case B230400: - baud = 230400; - break; - case B115200: - baud = 115200; - break; - case B57600: - baud = 57600; - break; - case B38400: - baud = 38400; - break; - case B19200: - baud = 19200; - break; - case B9600: - baud = 9600; - break; - case B4800: - baud = 4800; - break; - case B2400: - baud = 2400; - break; - case B1800: - baud = 1800; - break; - case B1200: - baud = 1200; - break; - case B600: - baud = 600; - break; - case B300: - baud = 300; - break; - case B200: - baud = 200; - break; - case B150: - baud = 150; - break; - case B134: - baud = 134; - break; - case B110: - baud = 110; - break; - case B75: - baud = 75; - break; - case B50: - baud = 50; - break; - default: - baud = 0; - break; - } - mxser_set_baud(info, baud); - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) { - cval |= UART_LCR_EPAR; - } - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->IsMoxaMustChipFlag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else { - // above add by Victor Yu. 08-30-2002 - - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { - info->MCR |= UART_MCR_AFE; - //status = mxser_get_msr(info->base, 0, info->port); -/* save_flags(flags); - cli(); - status = inb(baseaddr + UART_MSR); - restore_flags(flags);*/ - //mxser_check_modem_status(info, status); - } else { - //status = mxser_get_msr(info->base, 0, info->port); - - //MX_LOCK(&info->slock); - status = inb(info->base + UART_MSR); - //MX_UNLOCK(&info->slock); - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } - } - } - } else { - info->flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->base + UART_MCR); - if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; - } else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->base + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) { - info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; - } - } - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { - spin_lock_irqsave(&info->slock, flags); - SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty)); - SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { - ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } - if (I_IXOFF(info->tty)) { - ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } - /* - if ( I_IXANY(info->tty) ) { - info->MCR |= MOXA_MUST_MCR_XON_ANY; - ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } else { - info->MCR &= ~MOXA_MUST_MCR_XON_ANY; - DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } - */ - spin_unlock_irqrestore(&info->slock, flags); - } - // above add by Victor Yu. 09-02-2002 - - - outb(fcr, info->base + UART_FCR); /* set fcr */ - outb(cval, info->base + UART_LCR); - - return ret; -} - - -static int mxser_set_baud(struct mxser_struct *info, long newspd) -{ - int quot = 0; - unsigned char cval; - int ret = 0; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return ret; - - if (!(info->base)) - return ret; - - if (newspd > info->MaxCanSetBaudRate) - return 0; - - info->realbaud = newspd; - if (newspd == 134) { - quot = (2 * info->baud_base / 269); - } else if (newspd) { - quot = info->baud_base / newspd; - - if (quot == 0) - quot = 1; - - } else { - quot = 0; - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - spin_lock_irqsave(&info->slock, flags); - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - } else { - spin_lock_irqsave(&info->slock, flags); - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return ret; - } - - cval = inb(info->base + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */ - outb(cval, info->base + UART_LCR); /* reset DLAB */ - - - return ret; -} - - - -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return (-EFAULT); - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->port; - tmp.port = info->base; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return (0); -} - -static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - unsigned int flags; - int retval = 0; - - if (!new_info || !info->base) - return (-EFAULT); - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if ((new_serial.irq != info->irq) || (new_serial.port != info->base) || (new_serial.custom_divisor != info->custom_divisor) || (new_serial.baud_base != info->baud_base)) - return (-EPERM); - - flags = info->flags & ASYNC_SPD_MASK; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) - return (-EPERM); - info->flags = ((info->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; //(info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - } - - /* added by casper, 3/17/2000, for mouse */ - info->type = new_serial.type; - - process_txrx_fifo(info); - - /* */ - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { - mxser_change_speed(info, NULL); - } - } else { - retval = mxser_startup(info); - } - return (retval); -} - -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_struct *info, int duration) -{ - unsigned long flags; - - if (!info->base) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned char control, status; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return (-ENOIOCTLCMD); - if (tty->flags & (1 << TTY_IO_ERROR)) - return (-EIO); - - control = info->MCR; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - spin_lock_irqsave(&info->slock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - - -static int mxser_read_register(int, unsigned short *); -static int mxser_program_mode(int); -static void mxser_normal_mode(int); - -static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) -{ - int id, i, bits; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; - - hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART; - - id = mxser_read_register(cap, regs); - if (id == C168_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C168_ISA; - hwconf->ports = 8; - } else if (id == C104_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C104_ISA; - hwconf->ports = 4; - } else if (id == C102_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C102_ISA; - hwconf->ports = 2; - } else if (id == CI132_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI132; - hwconf->ports = 2; - } else if (id == CI134_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI134; - hwconf->ports = 4; - } else if (id == CI104J_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI104J; - hwconf->ports = 4; - } else - return (0); - - irq = 0; - if (hwconf->ports == 2) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - return (MXSER_ERR_IRQ_CONFLIT); - } else if (hwconf->ports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - return (MXSER_ERR_IRQ_CONFLIT); - } else if (hwconf->ports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - return (MXSER_ERR_IRQ_CONFLIT); - } - - if (!irq) { - return (MXSER_ERR_IRQ); - } - hwconf->irq = ((int) (irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) { - return (MXSER_ERR_VECTOR); - } - hwconf->vector = (int) regs[11]; /* interrupt vector */ - if (id == 1) - hwconf->vector_mask = 0x00FF; - else - hwconf->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - hwconf->baud_base[i] = 921600; - hwconf->MaxCanSetBaudRate[i] = 921600; // add by Victor Yu. 09-04-2002 - } else { - hwconf->baud_base[i] = 115200; - hwconf->MaxCanSetBaudRate[i] = 115200; // add by Victor Yu. 09-04-2002 - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); - - if (scratch & 0xC0) - hwconf->uart_type = PORT_16550A; - else - hwconf->uart_type = PORT_16450; - if (id == 1) - hwconf->ports = 8; - else - hwconf->ports = 4; - request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)"); - request_region(hwconf->vector, 1, "mxser(vector)"); - return (hwconf->ports); -} - -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int mxser_read_register(int port, unsigned short *regs) -{ - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return (id); - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void) inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return (id); -} - -static int mxser_program_mode(int port) -{ - int id, i, j, n; - //unsigned long flags; - - spin_lock(&gm_lock); - outb(0, port); - outb(0, port); - outb(0, port); - (void) inb(port); - (void) inb(port); - outb(0, port); - (void) inb(port); - //restore_flags(flags); - spin_unlock(&gm_lock); - - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID) && (id != CI104J_ASIC_ID)) - return (-1); - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return (id); -} - -static void mxser_normal_mode(int port) -{ - int i, n; - - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void) inb(port); - } - outb(0x00, port + 4); -} - -module_init(mxser_module_init); -module_exit(mxser_module_exit); |