diff options
Diffstat (limited to 'drivers/char/moxa.c')
| -rw-r--r-- | drivers/char/moxa.c | 2851 |
1 files changed, 0 insertions, 2851 deletions
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c deleted file mode 100644 index 64b7b2b1835..00000000000 --- a/drivers/char/moxa.c +++ /dev/null @@ -1,2851 +0,0 @@ -/*****************************************************************************/ -/* - * moxa.c -- MOXA Intellio family multiport serial driver. - * - * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw). - * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* - * MOXA Intellio Series Driver - * for : LINUX - * date : 1999/1/7 - * version : 5.1 - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/serial.h> -#include <linux/tty_driver.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/completion.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> - -#define MOXA_VERSION "5.1k" - -#define MOXAMAJOR 172 -#define MOXACUMAJOR 173 - -#define MAX_BOARDS 4 /* Don't change this value */ -#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */ -#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD) - -/* - * Define the Moxa PCI vendor and device IDs. - */ -#define MOXA_BUS_TYPE_ISA 0 -#define MOXA_BUS_TYPE_PCI 1 - -enum { - MOXA_BOARD_C218_PCI = 1, - MOXA_BOARD_C218_ISA, - MOXA_BOARD_C320_PCI, - MOXA_BOARD_C320_ISA, - MOXA_BOARD_CP204J, -}; - -static char *moxa_brdname[] = -{ - "C218 Turbo PCI series", - "C218 Turbo ISA series", - "C320 Turbo PCI series", - "C320 Turbo ISA series", - "CP-204J series", -}; - -#ifdef CONFIG_PCI -static struct pci_device_id moxa_pcibrds[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218), - .driver_data = MOXA_BOARD_C218_PCI }, - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320), - .driver_data = MOXA_BOARD_C320_PCI }, - { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J), - .driver_data = MOXA_BOARD_CP204J }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, moxa_pcibrds); -#endif /* CONFIG_PCI */ - -struct moxa_isa_board_conf { - int boardType; - int numPorts; - unsigned long baseAddr; -}; - -static struct moxa_isa_board_conf moxa_isa_boards[] = -{ -/* {MOXA_BOARD_C218_ISA,8,0xDC000}, */ -}; - -static struct moxa_board_conf { - int boardType; - int numPorts; - unsigned long baseAddr; - int busType; - - int loadstat; - - void __iomem *basemem; - void __iomem *intNdx; - void __iomem *intPend; - void __iomem *intTable; -} moxa_boards[MAX_BOARDS]; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -struct moxaq_str { - int inq; - int outq; -}; - -struct moxa_port { - int type; - int port; - int close_delay; - unsigned short closing_wait; - int count; - int blocked_open; - long event; /* long req'd for set_bit --RR */ - int asyncflags; - unsigned long statusflags; - struct tty_struct *tty; - int cflag; - wait_queue_head_t open_wait; - struct completion close_wait; - - struct timer_list emptyTimer; - - char chkPort; - char lineCtrl; - void __iomem *tableAddr; - long curBaud; - char DCDState; - char lowChkFlag; - - ushort breakCnt; -}; - -/* statusflags */ -#define TXSTOPPED 0x1 -#define LOWWAIT 0x2 -#define EMPTYWAIT 0x4 -#define THROTTLE 0x8 - -#define SERIAL_DO_RESTART - -#define WAKEUP_CHARS 256 - -static int ttymajor = MOXAMAJOR; -/* Variables for insmod */ -#ifdef MODULE -static int baseaddr[4]; -static int type[4]; -static int numports[4]; -#endif - -MODULE_AUTHOR("William Chen"); -MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); -MODULE_LICENSE("GPL"); -#ifdef MODULE -module_param_array(type, int, NULL, 0); -module_param_array(baseaddr, int, NULL, 0); -module_param_array(numports, int, NULL, 0); -#endif -module_param(ttymajor, int, 0); - -/* - * static functions: - */ -static int moxa_open(struct tty_struct *, struct file *); -static void moxa_close(struct tty_struct *, struct file *); -static int moxa_write(struct tty_struct *, const unsigned char *, int); -static int moxa_write_room(struct tty_struct *); -static void moxa_flush_buffer(struct tty_struct *); -static int moxa_chars_in_buffer(struct tty_struct *); -static void moxa_flush_chars(struct tty_struct *); -static void moxa_put_char(struct tty_struct *, unsigned char); -static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long); -static void moxa_throttle(struct tty_struct *); -static void moxa_unthrottle(struct tty_struct *); -static void moxa_set_termios(struct tty_struct *, struct ktermios *); -static void moxa_stop(struct tty_struct *); -static void moxa_start(struct tty_struct *); -static void moxa_hangup(struct tty_struct *); -static int moxa_tiocmget(struct tty_struct *tty, struct file *file); -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); -static void moxa_poll(unsigned long); -static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); -static int moxa_block_till_ready(struct tty_struct *, struct file *, - struct moxa_port *); -static void moxa_setup_empty_event(struct tty_struct *); -static void moxa_check_xmit_empty(unsigned long); -static void moxa_shut_down(struct moxa_port *); -static void moxa_receive_data(struct moxa_port *); -/* - * moxa board interface functions: - */ -static void MoxaDriverInit(void); -static int MoxaDriverIoctl(unsigned int, unsigned long, int); -static int MoxaDriverPoll(void); -static int MoxaPortsOfCard(int); -static int MoxaPortIsValid(int); -static void MoxaPortEnable(int); -static void MoxaPortDisable(int); -static long MoxaPortGetMaxBaud(int); -static long MoxaPortSetBaud(int, long); -static int MoxaPortSetTermio(int, struct ktermios *, speed_t); -static int MoxaPortGetLineOut(int, int *, int *); -static void MoxaPortLineCtrl(int, int, int); -static void MoxaPortFlowCtrl(int, int, int, int, int, int); -static int MoxaPortLineStatus(int); -static int MoxaPortDCDChange(int); -static int MoxaPortDCDON(int); -static void MoxaPortFlushData(int, int); -static int MoxaPortWriteData(int, unsigned char *, int); -static int MoxaPortReadData(int, struct tty_struct *tty); -static int MoxaPortTxQueue(int); -static int MoxaPortRxQueue(int); -static int MoxaPortTxFree(int); -static void MoxaPortTxDisable(int); -static void MoxaPortTxEnable(int); -static int MoxaPortResetBrkCnt(int); -static void MoxaPortSendBreak(int, int); -static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *); -static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *); -static void MoxaSetFifo(int port, int enable); - -static const struct tty_operations moxa_ops = { - .open = moxa_open, - .close = moxa_close, - .write = moxa_write, - .write_room = moxa_write_room, - .flush_buffer = moxa_flush_buffer, - .chars_in_buffer = moxa_chars_in_buffer, - .flush_chars = moxa_flush_chars, - .put_char = moxa_put_char, - .ioctl = moxa_ioctl, - .throttle = moxa_throttle, - .unthrottle = moxa_unthrottle, - .set_termios = moxa_set_termios, - .stop = moxa_stop, - .start = moxa_start, - .hangup = moxa_hangup, - .tiocmget = moxa_tiocmget, - .tiocmset = moxa_tiocmset, -}; - -static struct tty_driver *moxaDriver; -static struct moxa_port moxa_ports[MAX_PORTS]; -static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); -static DEFINE_SPINLOCK(moxa_lock); - -#ifdef CONFIG_PCI -static int __devinit moxa_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct moxa_board_conf *board; - unsigned int i; - int board_type = ent->driver_data; - int retval; - - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "can't enable pci device\n"); - goto err; - } - - for (i = 0; i < MAX_BOARDS; i++) - if (moxa_boards[i].basemem == NULL) - break; - - retval = -ENODEV; - if (i >= MAX_BOARDS) { - dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards " - "found. Board is ignored.\n", MAX_BOARDS); - goto err; - } - - board = &moxa_boards[i]; - board->basemem = pci_iomap(pdev, 2, 0x4000); - if (board->basemem == NULL) { - dev_err(&pdev->dev, "can't remap io space 2\n"); - goto err; - } - - board->boardType = board_type; - switch (board_type) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - board->numPorts = 8; - break; - - case MOXA_BOARD_CP204J: - board->numPorts = 4; - break; - default: - board->numPorts = 0; - break; - } - board->busType = MOXA_BUS_TYPE_PCI; - - pci_set_drvdata(pdev, board); - - return (0); -err: - return retval; -} - -static void __devexit moxa_pci_remove(struct pci_dev *pdev) -{ - struct moxa_board_conf *brd = pci_get_drvdata(pdev); - - pci_iounmap(pdev, brd->basemem); - brd->basemem = NULL; -} - -static struct pci_driver moxa_pci_driver = { - .name = "moxa", - .id_table = moxa_pcibrds, - .probe = moxa_pci_probe, - .remove = __devexit_p(moxa_pci_remove) -}; -#endif /* CONFIG_PCI */ - -static int __init moxa_init(void) -{ - int i, numBoards, retval = 0; - struct moxa_port *ch; - - printk(KERN_INFO "MOXA Intellio family driver version %s\n", - MOXA_VERSION); - moxaDriver = alloc_tty_driver(MAX_PORTS + 1); - if (!moxaDriver) - return -ENOMEM; - - moxaDriver->owner = THIS_MODULE; - moxaDriver->name = "ttyMX"; - moxaDriver->major = ttymajor; - moxaDriver->minor_start = 0; - moxaDriver->type = TTY_DRIVER_TYPE_SERIAL; - moxaDriver->subtype = SERIAL_TYPE_NORMAL; - moxaDriver->init_termios = tty_std_termios; - moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; - moxaDriver->init_termios.c_ispeed = 9600; - moxaDriver->init_termios.c_ospeed = 9600; - moxaDriver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(moxaDriver, &moxa_ops); - - for (i = 0, ch = moxa_ports; i < MAX_PORTS; i++, ch++) { - ch->type = PORT_16550A; - ch->port = i; - ch->close_delay = 5 * HZ / 10; - ch->closing_wait = 30 * HZ; - ch->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; - init_waitqueue_head(&ch->open_wait); - init_completion(&ch->close_wait); - - setup_timer(&ch->emptyTimer, moxa_check_xmit_empty, - (unsigned long)ch); - } - - pr_debug("Moxa tty devices major number = %d\n", ttymajor); - - if (tty_register_driver(moxaDriver)) { - printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n"); - put_tty_driver(moxaDriver); - return -1; - } - - mod_timer(&moxaTimer, jiffies + HZ / 50); - - /* Find the boards defined in source code */ - numBoards = 0; - for (i = 0; i < MAX_BOARDS; i++) { - if ((moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) || - (moxa_isa_boards[i].boardType == MOXA_BOARD_C320_ISA)) { - moxa_boards[numBoards].boardType = moxa_isa_boards[i].boardType; - if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) - moxa_boards[numBoards].numPorts = 8; - else - moxa_boards[numBoards].numPorts = moxa_isa_boards[i].numPorts; - moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA; - moxa_boards[numBoards].baseAddr = moxa_isa_boards[i].baseAddr; - pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", - numBoards + 1, - moxa_brdname[moxa_boards[numBoards].boardType-1], - moxa_boards[numBoards].baseAddr); - numBoards++; - } - } - /* Find the boards defined form module args. */ -#ifdef MODULE - for (i = 0; i < MAX_BOARDS; i++) { - if ((type[i] == MOXA_BOARD_C218_ISA) || - (type[i] == MOXA_BOARD_C320_ISA)) { - pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", - numBoards + 1, moxa_brdname[type[i] - 1], - (unsigned long)baseaddr[i]); - if (numBoards >= MAX_BOARDS) { - printk(KERN_WARNING "More than %d MOXA " - "Intellio family boards found. Board " - "is ignored.\n", MAX_BOARDS); - continue; - } - moxa_boards[numBoards].boardType = type[i]; - if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) - moxa_boards[numBoards].numPorts = 8; - else - moxa_boards[numBoards].numPorts = numports[i]; - moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA; - moxa_boards[numBoards].baseAddr = baseaddr[i]; - numBoards++; - } - } -#endif - -#ifdef CONFIG_PCI - retval = pci_register_driver(&moxa_pci_driver); - if (retval) { - printk(KERN_ERR "Can't register moxa pci driver!\n"); - if (numBoards) - retval = 0; - } -#endif - - for (i = 0; i < numBoards; i++) { - moxa_boards[i].basemem = ioremap(moxa_boards[i].baseAddr, - 0x4000); - } - - return retval; -} - -static void __exit moxa_exit(void) -{ - int i; - - del_timer_sync(&moxaTimer); - - for (i = 0; i < MAX_PORTS; i++) - del_timer_sync(&moxa_ports[i].emptyTimer); - - if (tty_unregister_driver(moxaDriver)) - printk(KERN_ERR "Couldn't unregister MOXA Intellio family " - "serial driver\n"); - put_tty_driver(moxaDriver); - -#ifdef CONFIG_PCI - pci_unregister_driver(&moxa_pci_driver); -#endif - - for (i = 0; i < MAX_BOARDS; i++) - if (moxa_boards[i].basemem) - iounmap(moxa_boards[i].basemem); -} - -module_init(moxa_init); -module_exit(moxa_exit); - -static int moxa_open(struct tty_struct *tty, struct file *filp) -{ - struct moxa_port *ch; - int port; - int retval; - - port = tty->index; - if (port == MAX_PORTS) { - return (0); - } - if (!MoxaPortIsValid(port)) { - tty->driver_data = NULL; - return (-ENODEV); - } - - ch = &moxa_ports[port]; - ch->count++; - tty->driver_data = ch; - ch->tty = tty; - if (!(ch->asyncflags & ASYNC_INITIALIZED)) { - ch->statusflags = 0; - moxa_set_tty_param(tty, tty->termios); - MoxaPortLineCtrl(ch->port, 1, 1); - MoxaPortEnable(ch->port); - ch->asyncflags |= ASYNC_INITIALIZED; - } - retval = moxa_block_till_ready(tty, filp, ch); - - moxa_unthrottle(tty); - - if (ch->type == PORT_16550A) { - MoxaSetFifo(ch->port, 1); - } else { - MoxaSetFifo(ch->port, 0); - } - - return (retval); -} - -static void moxa_close(struct tty_struct *tty, struct file *filp) -{ - struct moxa_port *ch; - int port; - - port = tty->index; - if (port == MAX_PORTS) { - return; - } - if (!MoxaPortIsValid(port)) { - pr_debug("Invalid portno in moxa_close\n"); - tty->driver_data = NULL; - return; - } - if (tty->driver_data == NULL) { - return; - } - if (tty_hung_up_p(filp)) { - return; - } - ch = (struct moxa_port *) tty->driver_data; - - if ((tty->count == 1) && (ch->count != 1)) { - printk(KERN_WARNING "moxa_close: bad serial port count; " - "tty->count is 1, ch->count is %d\n", ch->count); - ch->count = 1; - } - if (--ch->count < 0) { - printk(KERN_WARNING "moxa_close: bad serial port count, " - "device=%s\n", tty->name); - ch->count = 0; - } - if (ch->count) { - return; - } - ch->asyncflags |= ASYNC_CLOSING; - - ch->cflag = tty->termios->c_cflag; - if (ch->asyncflags & ASYNC_INITIALIZED) { - moxa_setup_empty_event(tty); - tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */ - del_timer_sync(&moxa_ports[ch->port].emptyTimer); - } - moxa_shut_down(ch); - MoxaPortFlushData(port, 2); - - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - ch->event = 0; - ch->tty = NULL; - if (ch->blocked_open) { - if (ch->close_delay) { - msleep_interruptible(jiffies_to_msecs(ch->close_delay)); - } - wake_up_interruptible(&ch->open_wait); - } - ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - complete_all(&ch->close_wait); -} - -static int moxa_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct moxa_port *ch; - int len, port; - unsigned long flags; - - ch = (struct moxa_port *) tty->driver_data; - if (ch == NULL) - return (0); - port = ch->port; - - spin_lock_irqsave(&moxa_lock, flags); - len = MoxaPortWriteData(port, (unsigned char *) buf, count); - spin_unlock_irqrestore(&moxa_lock, flags); - - /********************************************* - if ( !(ch->statusflags & LOWWAIT) && - ((len != count) || (MoxaPortTxFree(port) <= 100)) ) - ************************************************/ - ch->statusflags |= LOWWAIT; - return (len); -} - -static int moxa_write_room(struct tty_struct *tty) -{ - struct moxa_port *ch; - - if (tty->stopped) - return (0); - ch = (struct moxa_port *) tty->driver_data; - if (ch == NULL) - return (0); - return (MoxaPortTxFree(ch->port)); -} - -static void moxa_flush_buffer(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - if (ch == NULL) - return; - MoxaPortFlushData(ch->port, 1); - tty_wakeup(tty); -} - -static int moxa_chars_in_buffer(struct tty_struct *tty) -{ - int chars; - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - /* - * Sigh...I have to check if driver_data is NULL here, because - * if an open() fails, the TTY subsystem eventually calls - * tty_wait_until_sent(), which calls the driver's chars_in_buffer() - * routine. And since the open() failed, we return 0 here. TDJ - */ - if (ch == NULL) - return (0); - chars = MoxaPortTxQueue(ch->port); - if (chars) { - /* - * Make it possible to wakeup anything waiting for output - * in tty_ioctl.c, etc. - */ - if (!(ch->statusflags & EMPTYWAIT)) - moxa_setup_empty_event(tty); - } - return (chars); -} - -static void moxa_flush_chars(struct tty_struct *tty) -{ - /* - * Don't think I need this, because this is called to empty the TX - * buffer for the 16450, 16550, etc. - */ -} - -static void moxa_put_char(struct tty_struct *tty, unsigned char c) -{ - struct moxa_port *ch; - int port; - unsigned long flags; - - ch = (struct moxa_port *) tty->driver_data; - if (ch == NULL) - return; - port = ch->port; - spin_lock_irqsave(&moxa_lock, flags); - MoxaPortWriteData(port, &c, 1); - spin_unlock_irqrestore(&moxa_lock, flags); - /************************************************ - if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) ) - *************************************************/ - ch->statusflags |= LOWWAIT; -} - -static int moxa_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - int port; - int flag = 0, dtr, rts; - - port = tty->index; - if ((port != MAX_PORTS) && (!ch)) - return (-EINVAL); - - MoxaPortGetLineOut(ch->port, &dtr, &rts); - if (dtr) - flag |= TIOCM_DTR; - if (rts) - flag |= TIOCM_RTS; - dtr = MoxaPortLineStatus(ch->port); - if (dtr & 1) - flag |= TIOCM_CTS; - if (dtr & 2) - flag |= TIOCM_DSR; - if (dtr & 4) - flag |= TIOCM_CD; - return flag; -} - -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - int port; - int dtr, rts; - - port = tty->index; - if ((port != MAX_PORTS) && (!ch)) - return (-EINVAL); - - MoxaPortGetLineOut(ch->port, &dtr, &rts); - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - MoxaPortLineCtrl(ch->port, dtr, rts); - return 0; -} - -static int moxa_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - register int port; - void __user *argp = (void __user *)arg; - int retval; - - port = tty->index; - if ((port != MAX_PORTS) && (!ch)) - return (-EINVAL); - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return (retval); - moxa_setup_empty_event(tty); - tty_wait_until_sent(tty, 0); - if (!arg) - MoxaPortSendBreak(ch->port, 0); - return (0); - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return (retval); - moxa_setup_empty_event(tty); - tty_wait_until_sent(tty, 0); - MoxaPortSendBreak(ch->port, arg); - return (0); - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp); - case TIOCSSOFTCAR: - if(get_user(retval, (unsigned long __user *) argp)) - return -EFAULT; - arg = retval; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - if (C_CLOCAL(tty)) - ch->asyncflags &= ~ASYNC_CHECK_CD; - else - ch->asyncflags |= ASYNC_CHECK_CD; - return (0); - case TIOCGSERIAL: - return moxa_get_serial_info(ch, argp); - - case TIOCSSERIAL: - return moxa_set_serial_info(ch, argp); - default: - retval = MoxaDriverIoctl(cmd, arg, port); - } - return (retval); -} - -static void moxa_throttle(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - ch->statusflags |= THROTTLE; -} - -static void moxa_unthrottle(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - ch->statusflags &= ~THROTTLE; -} - -static void moxa_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - if (ch == NULL) - return; - moxa_set_tty_param(tty, old_termios); - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&ch->open_wait); -} - -static void moxa_stop(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - if (ch == NULL) - return; - MoxaPortTxDisable(ch->port); - ch->statusflags |= TXSTOPPED; -} - - -static void moxa_start(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - if (ch == NULL) - return; - - if (!(ch->statusflags & TXSTOPPED)) - return; - - MoxaPortTxEnable(ch->port); - ch->statusflags &= ~TXSTOPPED; -} - -static void moxa_hangup(struct tty_struct *tty) -{ - struct moxa_port *ch = (struct moxa_port *) tty->driver_data; - - moxa_flush_buffer(tty); - moxa_shut_down(ch); - ch->event = 0; - ch->count = 0; - ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE; - ch->tty = NULL; - wake_up_interruptible(&ch->open_wait); -} - -static void moxa_poll(unsigned long ignored) -{ - register int card; - struct moxa_port *ch; - struct tty_struct *tp; - int i, ports; - - del_timer(&moxaTimer); - - if (MoxaDriverPoll() < 0) { - mod_timer(&moxaTimer, jiffies + HZ / 50); - return; - } - for (card = 0; card < MAX_BOARDS; card++) { - if ((ports = MoxaPortsOfCard(card)) <= 0) - continue; - ch = &moxa_ports[card * MAX_PORTS_PER_BOARD]; - for (i = 0; i < ports; i++, ch++) { - if ((ch->asyncflags & ASYNC_INITIALIZED) == 0) - continue; - if (!(ch->statusflags & THROTTLE) && - (MoxaPortRxQueue(ch->port) > 0)) - moxa_receive_data(ch); - if ((tp = ch->tty) == 0) - continue; - if (ch->statusflags & LOWWAIT) { - if (MoxaPortTxQueue(ch->port) <= WAKEUP_CHARS) { - if (!tp->stopped) { - ch->statusflags &= ~LOWWAIT; - tty_wakeup(tp); - } - } - } - if (!I_IGNBRK(tp) && (MoxaPortResetBrkCnt(ch->port) > 0)) { - tty_insert_flip_char(tp, 0, TTY_BREAK); - tty_schedule_flip(tp); - } - if (MoxaPortDCDChange(ch->port)) { - if (ch->asyncflags & ASYNC_CHECK_CD) { - if (MoxaPortDCDON(ch->port)) - wake_up_interruptible(&ch->open_wait); - else { - tty_hangup(tp); - wake_up_interruptible(&ch->open_wait); - ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE; - } - } - } - } - } - - mod_timer(&moxaTimer, jiffies + HZ / 50); -} - -/******************************************************************************/ - -static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) -{ - register struct ktermios *ts; - struct moxa_port *ch; - int rts, cts, txflow, rxflow, xany, baud; - - ch = (struct moxa_port *) tty->driver_data; - ts = tty->termios; - if (ts->c_cflag & CLOCAL) - ch->asyncflags &= ~ASYNC_CHECK_CD; - else - ch->asyncflags |= ASYNC_CHECK_CD; - rts = cts = txflow = rxflow = xany = 0; - if (ts->c_cflag & CRTSCTS) - rts = cts = 1; - if (ts->c_iflag & IXON) - txflow = 1; - if (ts->c_iflag & IXOFF) - rxflow = 1; - if (ts->c_iflag & IXANY) - xany = 1; - - /* Clear the features we don't support */ - ts->c_cflag &= ~CMSPAR; - MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany); - baud = MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty)); - if (baud == -1) - baud = tty_termios_baud_rate(old_termios); - /* Not put the baud rate into the termios data */ - tty_encode_baud_rate(tty, baud, baud); -} - -static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, - struct moxa_port *ch) -{ - DECLARE_WAITQUEUE(wait,current); - unsigned long flags; - int retval; - int do_clocal = C_CLOCAL(tty); - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || (ch->asyncflags & ASYNC_CLOSING)) { - if (ch->asyncflags & ASYNC_CLOSING) - wait_for_completion_interruptible(&ch->close_wait); -#ifdef SERIAL_DO_RESTART - if (ch->asyncflags & ASYNC_HUP_NOTIFY) - return (-EAGAIN); - else - return (-ERESTARTSYS); -#else - return (-EAGAIN); -#endif - } - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - if (filp->f_flags & O_NONBLOCK) { - ch->asyncflags |= ASYNC_NORMAL_ACTIVE; - return (0); - } - /* - * Block waiting for the carrier detect and the line to become free - */ - retval = 0; - add_wait_queue(&ch->open_wait, &wait); - pr_debug("block_til_ready before block: ttys%d, count = %d\n", - ch->port, ch->count); - spin_lock_irqsave(&moxa_lock, flags); - if (!tty_hung_up_p(filp)) - ch->count--; - ch->blocked_open++; - spin_unlock_irqrestore(&moxa_lock, flags); - - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(ch->asyncflags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (ch->asyncflags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(ch->asyncflags & ASYNC_CLOSING) && (do_clocal || - MoxaPortDCDON(ch->port))) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&ch->open_wait, &wait); - - spin_lock_irqsave(&moxa_lock, flags); - if (!tty_hung_up_p(filp)) - ch->count++; - ch->blocked_open--; - spin_unlock_irqrestore(&moxa_lock, flags); - pr_debug("block_til_ready after blocking: ttys%d, count = %d\n", - ch->port, ch->count); - if (retval) - return (retval); - /* FIXME: review to see if we need to use set_bit on these */ - ch->asyncflags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static void moxa_setup_empty_event(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&moxa_lock, flags); - ch->statusflags |= EMPTYWAIT; - mod_timer(&moxa_ports[ch->port].emptyTimer, jiffies + HZ); - spin_unlock_irqrestore(&moxa_lock, flags); -} - -static void moxa_check_xmit_empty(unsigned long data) -{ - struct moxa_port *ch; - - ch = (struct moxa_port *) data; - if (ch->tty && (ch->statusflags & EMPTYWAIT)) { - if (MoxaPortTxQueue(ch->port) == 0) { - ch->statusflags &= ~EMPTYWAIT; - tty_wakeup(ch->tty); - return; - } - mod_timer(&moxa_ports[ch->port].emptyTimer, - round_jiffies(jiffies + HZ)); - } else - ch->statusflags &= ~EMPTYWAIT; -} - -static void moxa_shut_down(struct moxa_port *ch) -{ - struct tty_struct *tp; - - if (!(ch->asyncflags & ASYNC_INITIALIZED)) - return; - - tp = ch->tty; - - MoxaPortDisable(ch->port); - - /* - * If we're a modem control device and HUPCL is on, drop RTS & DTR. - */ - if (tp->termios->c_cflag & HUPCL) - MoxaPortLineCtrl(ch->port, 0, 0); - - ch->asyncflags &= ~ASYNC_INITIALIZED; -} - -static void moxa_receive_data(struct moxa_port *ch) -{ - struct tty_struct *tp; - struct ktermios *ts; - unsigned long flags; - - ts = NULL; - tp = ch->tty; - if (tp) - ts = tp->termios; - /************************************************** - if ( !tp || !ts || !(ts->c_cflag & CREAD) ) { - *****************************************************/ - if (!tp || !ts) { - MoxaPortFlushData(ch->port, 0); - return; - } - spin_lock_irqsave(&moxa_lock, flags); - MoxaPortReadData(ch->port, tp); - spin_unlock_irqrestore(&moxa_lock, flags); - tty_schedule_flip(tp); -} - -#define Magic_code 0x404 - -/* - * System Configuration - */ -/* - * for C218 BIOS initialization - */ -#define C218_ConfBase 0x800 -#define C218_status (C218_ConfBase + 0) /* BIOS running status */ -#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ -#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ -#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ -#define C218check_sum (C218_ConfBase + 8) /* BYTE */ -#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ -#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ -#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ -#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ -#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ - -#define C218_LoadBuf 0x0F00 -#define C218_KeyCode 0x218 -#define CP204J_KeyCode 0x204 - -/* - * for C320 BIOS initialization - */ -#define C320_ConfBase 0x800 -#define C320_LoadBuf 0x0f00 -#define STS_init 0x05 /* for C320_status */ - -#define C320_status C320_ConfBase + 0 /* BIOS running status */ -#define C320_diag C320_ConfBase + 2 /* diagnostic status */ -#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ -#define C320DLoad_len C320_ConfBase + 6 /* WORD */ -#define C320check_sum C320_ConfBase + 8 /* WORD */ -#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ -#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ -#define C320UART_no C320_ConfBase + 0x0e /* WORD */ - -#define C320_KeyCode 0x320 - -#define FixPage_addr 0x0000 /* starting addr of static page */ -#define DynPage_addr 0x2000 /* starting addr of dynamic page */ -#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ -#define Control_reg 0x1ff0 /* select page and reset control */ -#define HW_reset 0x80 - -/* - * Function Codes - */ -#define FC_CardReset 0x80 -#define FC_ChannelReset 1 /* C320 firmware not supported */ -#define FC_EnableCH 2 -#define FC_DisableCH 3 -#define FC_SetParam 4 -#define FC_SetMode 5 -#define FC_SetRate 6 -#define FC_LineControl 7 -#define FC_LineStatus 8 -#define FC_XmitControl 9 -#define FC_FlushQueue 10 -#define FC_SendBreak 11 -#define FC_StopBreak 12 -#define FC_LoopbackON 13 -#define FC_LoopbackOFF 14 -#define FC_ClrIrqTable 15 -#define FC_SendXon 16 -#define FC_SetTermIrq 17 /* C320 firmware not supported */ -#define FC_SetCntIrq 18 /* C320 firmware not supported */ -#define FC_SetBreakIrq 19 -#define FC_SetLineIrq 20 -#define FC_SetFlowCtl 21 -#define FC_GenIrq 22 -#define FC_InCD180 23 -#define FC_OutCD180 24 -#define FC_InUARTreg 23 -#define FC_OutUARTreg 24 -#define FC_SetXonXoff 25 -#define FC_OutCD180CCR 26 -#define FC_ExtIQueue 27 -#define FC_ExtOQueue 28 -#define FC_ClrLineIrq 29 -#define FC_HWFlowCtl 30 -#define FC_GetClockRate 35 -#define FC_SetBaud 36 -#define FC_SetDataMode 41 -#define FC_GetCCSR 43 -#define FC_GetDataError 45 -#define FC_RxControl 50 -#define FC_ImmSend 51 -#define FC_SetXonState 52 -#define FC_SetXoffState 53 -#define FC_SetRxFIFOTrig 54 -#define FC_SetTxFIFOCnt 55 -#define FC_UnixRate 56 -#define FC_UnixResetTimer 57 - -#define RxFIFOTrig1 0 -#define RxFIFOTrig4 1 -#define RxFIFOTrig8 2 -#define RxFIFOTrig14 3 - -/* - * Dual-Ported RAM - */ -#define DRAM_global 0 -#define INT_data (DRAM_global + 0) -#define Config_base (DRAM_global + 0x108) - -#define IRQindex (INT_data + 0) -#define IRQpending (INT_data + 4) -#define IRQtable (INT_data + 8) - -/* - * Interrupt Status - */ -#define IntrRx 0x01 /* receiver data O.K. */ -#define IntrTx 0x02 /* transmit buffer empty */ -#define IntrFunc 0x04 /* function complete */ -#define IntrBreak 0x08 /* received break */ -#define IntrLine 0x10 /* line status change - for transmitter */ -#define IntrIntr 0x20 /* received INTR code */ -#define IntrQuit 0x40 /* received QUIT code */ -#define IntrEOF 0x80 /* received EOF code */ - -#define IntrRxTrigger 0x100 /* rx data count reach tigger value */ -#define IntrTxTrigger 0x200 /* tx data count below trigger value */ - -#define Magic_no (Config_base + 0) -#define Card_model_no (Config_base + 2) -#define Total_ports (Config_base + 4) -#define Module_cnt (Config_base + 8) -#define Module_no (Config_base + 10) -#define Timer_10ms (Config_base + 14) -#define Disable_IRQ (Config_base + 20) -#define TMS320_PORT1 (Config_base + 22) -#define TMS320_PORT2 (Config_base + 24) -#define TMS320_CLOCK (Config_base + 26) - -/* - * DATA BUFFER in DRAM - */ -#define Extern_table 0x400 /* Base address of the external table - (24 words * 64) total 3K bytes - (24 words * 128) total 6K bytes */ -#define Extern_size 0x60 /* 96 bytes */ -#define RXrptr 0x00 /* read pointer for RX buffer */ -#define RXwptr 0x02 /* write pointer for RX buffer */ -#define TXrptr 0x04 /* read pointer for TX buffer */ -#define TXwptr 0x06 /* write pointer for TX buffer */ -#define HostStat 0x08 /* IRQ flag and general flag */ -#define FlagStat 0x0A -#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ - /* x x x x | | | | */ - /* | | | + CTS flow */ - /* | | +--- RTS flow */ - /* | +------ TX Xon/Xoff */ - /* +--------- RX Xon/Xoff */ -#define Break_cnt 0x0E /* received break count */ -#define CD180TXirq 0x10 /* if non-0: enable TX irq */ -#define RX_mask 0x12 -#define TX_mask 0x14 -#define Ofs_rxb 0x16 -#define Ofs_txb 0x18 -#define Page_rxb 0x1A -#define Page_txb 0x1C -#define EndPage_rxb 0x1E -#define EndPage_txb 0x20 -#define Data_error 0x22 -#define RxTrigger 0x28 -#define TxTrigger 0x2a - -#define rRXwptr 0x34 -#define Low_water 0x36 - -#define FuncCode 0x40 -#define FuncArg 0x42 -#define FuncArg1 0x44 - -#define C218rx_size 0x2000 /* 8K bytes */ -#define C218tx_size 0x8000 /* 32K bytes */ - -#define C218rx_mask (C218rx_size - 1) -#define C218tx_mask (C218tx_size - 1) - -#define C320p8rx_size 0x2000 -#define C320p8tx_size 0x8000 -#define C320p8rx_mask (C320p8rx_size - 1) -#define C320p8tx_mask (C320p8tx_size - 1) - -#define C320p16rx_size 0x2000 -#define C320p16tx_size 0x4000 -#define C320p16rx_mask (C320p16rx_size - 1) -#define C320p16tx_mask (C320p16tx_size - 1) - -#define C320p24rx_size 0x2000 -#define C320p24tx_size 0x2000 -#define C320p24rx_mask (C320p24rx_size - 1) -#define C320p24tx_mask (C320p24tx_size - 1) - -#define C320p32rx_size 0x1000 -#define C320p32tx_size 0x1000 -#define C320p32rx_mask (C320p32rx_size - 1) -#define C320p32tx_mask (C320p32tx_size - 1) - -#define Page_size 0x2000 -#define Page_mask (Page_size - 1) -#define C218rx_spage 3 -#define C218tx_spage 4 -#define C218rx_pageno 1 -#define C218tx_pageno 4 -#define C218buf_pageno 5 - -#define C320p8rx_spage 3 -#define C320p8tx_spage 4 -#define C320p8rx_pgno 1 -#define C320p8tx_pgno 4 -#define C320p8buf_pgno 5 - -#define C320p16rx_spage 3 -#define C320p16tx_spage 4 -#define C320p16rx_pgno 1 -#define C320p16tx_pgno 2 -#define C320p16buf_pgno 3 - -#define C320p24rx_spage 3 -#define C320p24tx_spage 4 -#define C320p24rx_pgno 1 -#define C320p24tx_pgno 1 -#define C320p24buf_pgno 2 - -#define C320p32rx_spage 3 -#define C320p32tx_ofs C320p32rx_size -#define C320p32tx_spage 3 -#define C320p32buf_pgno 1 - -/* - * Host Status - */ -#define WakeupRx 0x01 -#define WakeupTx 0x02 -#define WakeupBreak 0x08 -#define WakeupLine 0x10 -#define WakeupIntr 0x20 -#define WakeupQuit 0x40 -#define WakeupEOF 0x80 /* used in VTIME control */ -#define WakeupRxTrigger 0x100 -#define WakeupTxTrigger 0x200 -/* - * Flag status - */ -#define Rx_over 0x01 -#define Xoff_state 0x02 -#define Tx_flowOff 0x04 -#define Tx_enable 0x08 -#define CTS_state 0x10 -#define DSR_state 0x20 -#define DCD_state 0x80 -/* - * FlowControl - */ -#define CTS_FlowCtl 1 -#define RTS_FlowCtl 2 -#define Tx_FlowCtl 4 -#define Rx_FlowCtl 8 -#define IXM_IXANY 0x10 - -#define LowWater 128 - -#define DTR_ON 1 -#define RTS_ON 2 -#define CTS_ON 1 -#define DSR_ON 2 -#define DCD_ON 8 - -/* mode definition */ -#define MX_CS8 0x03 -#define MX_CS7 0x02 -#define MX_CS6 0x01 -#define MX_CS5 0x00 - -#define MX_STOP1 0x00 -#define MX_STOP15 0x04 -#define MX_STOP2 0x08 - -#define MX_PARNONE 0x00 -#define MX_PAREVEN 0x40 -#define MX_PARODD 0xC0 - -/* - * Query - */ - -struct mon_str { - int tick; - int rxcnt[MAX_PORTS]; - int txcnt[MAX_PORTS]; -}; - -#define DCD_changed 0x01 -#define DCD_oldstate 0x80 - -static unsigned char moxaBuff[10240]; -static int moxaLowWaterChk; -static int moxaCard; -static struct mon_str moxaLog; -static int moxaFuncTout = HZ / 2; - -static void moxafunc(void __iomem *, int, ushort); -static void moxa_wait_finish(void __iomem *); -static void moxa_low_water_check(void __iomem *); -static int moxaloadbios(int, unsigned char __user *, int); -static int moxafindcard(int); -static int moxaload320b(int, unsigned char __user *, int); -static int moxaloadcode(int, unsigned char __user *, int); -static int moxaloadc218(int, void __iomem *, int); -static int moxaloadc320(int, void __iomem *, int, int *); - -/***************************************************************************** - * Driver level functions: * - * 1. MoxaDriverInit(void); * - * 2. MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); * - * 3. MoxaDriverPoll(void); * - *****************************************************************************/ -void MoxaDriverInit(void) -{ - struct moxa_port *p; - unsigned int i; - - moxaFuncTout = HZ / 2; /* 500 mini-seconds */ - moxaCard = 0; - moxaLog.tick = 0; - moxaLowWaterChk = 0; - for (i = 0; i < MAX_PORTS; i++) { - p = &moxa_ports[i]; - p->chkPort = 0; - p->lowChkFlag = 0; - p->lineCtrl = 0; - moxaLog.rxcnt[i] = 0; - moxaLog.txcnt[i] = 0; - } -} - -#define MOXA 0x400 -#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ -#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ -#define MOXA_INIT_DRIVER (MOXA + 6) /* moxaCard=0 */ -#define MOXA_LOAD_BIOS (MOXA + 9) /* download BIOS */ -#define MOXA_FIND_BOARD (MOXA + 10) /* Check if MOXA card exist? */ -#define MOXA_LOAD_C320B (MOXA + 11) /* download 320B firmware */ -#define MOXA_LOAD_CODE (MOXA + 12) /* download firmware */ -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_IOQUEUE (MOXA + 27) -#define MOXA_FLUSH_QUEUE (MOXA + 28) -#define MOXA_GET_CONF (MOXA + 35) /* configuration */ -#define MOXA_GET_MAJOR (MOXA + 63) -#define MOXA_GET_CUMAJOR (MOXA + 64) -#define MOXA_GETMSTATUS (MOXA + 65) - -struct dl_str { - char __user *buf; - int len; - int cardno; -}; - -static struct dl_str dltmp; - -void MoxaPortFlushData(int port, int mode) -{ - void __iomem *ofsAddr; - if ((mode < 0) || (mode > 2)) - return; - ofsAddr = moxa_ports[port].tableAddr; - moxafunc(ofsAddr, FC_FlushQueue, mode); - if (mode != 1) { - moxa_ports[port].lowChkFlag = 0; - moxa_low_water_check(ofsAddr); - } -} - -int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port) -{ - int i; - int status; - int MoxaPortTxQueue(int), MoxaPortRxQueue(int); - void __user *argp = (void __user *)arg; - - if (port == MAX_PORTS) { - if ((cmd != MOXA_GET_CONF) && (cmd != MOXA_INIT_DRIVER) && - (cmd != MOXA_LOAD_BIOS) && (cmd != MOXA_FIND_BOARD) && (cmd != MOXA_LOAD_C320B) && - (cmd != MOXA_LOAD_CODE) && (cmd != MOXA_GETDATACOUNT) && - (cmd != MOXA_GET_IOQUEUE) && (cmd != MOXA_GET_MAJOR) && - (cmd != MOXA_GET_CUMAJOR) && (cmd != MOXA_GETMSTATUS)) - return (-EINVAL); - } - switch (cmd) { - case MOXA_GET_CONF: - if(copy_to_user(argp, &moxa_boards, MAX_BOARDS * - sizeof(struct moxa_board_conf))) - return -EFAULT; - return (0); - case MOXA_INIT_DRIVER: - if ((int) arg == 0x404) - MoxaDriverInit(); - return (0); - case MOXA_GETDATACOUNT: - moxaLog.tick = jiffies; - if(copy_to_user(argp, &moxaLog, sizeof(struct mon_str))) - return -EFAULT; - return (0); - case MOXA_FLUSH_QUEUE: - MoxaPortFlushData(port, arg); - return (0); - case MOXA_GET_IOQUEUE: { - struct moxaq_str __user *argm = argp; - struct moxaq_str tmp; - - for (i = 0; i < MAX_PORTS; i++, argm++) { - memset(&tmp, 0, sizeof(tmp)); - if (moxa_ports[i].chkPort) { - tmp.inq = MoxaPortRxQueue(i); - tmp.outq = MoxaPortTxQueue(i); - } - if (copy_to_user(argm, &tmp, sizeof(tmp))) - return -EFAULT; - } - return (0); - } case MOXA_GET_OQUEUE: - i = MoxaPortTxQueue(port); - return put_user(i, (unsigned long __user *)argp); - case MOXA_GET_IQUEUE: - i = MoxaPortRxQueue(port); - return put_user(i, (unsigned long __user *)argp); - case MOXA_GET_MAJOR: - if(copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - case MOXA_GET_CUMAJOR: - i = 0; - if(copy_to_user(argp, &i, sizeof(int))) - return -EFAULT; - return 0; - case MOXA_GETMSTATUS: { - struct mxser_mstatus __user *argm = argp; - struct mxser_mstatus tmp; - struct moxa_port *p; - - for (i = 0; i < MAX_PORTS; i++, argm++) { - p = &moxa_ports[i]; - memset(&tmp, 0, sizeof(tmp)); - if (!p->chkPort) { - goto copy; - } else { - status = MoxaPortLineStatus(p->port); - if (status & 1) - tmp.cts = 1; - if (status & 2) - tmp.dsr = 1; - if (status & 4) - tmp.dcd = 1; - } - - if (!p->tty || !p->tty->termios) - tmp.cflag = p->cflag; - else - tmp.cflag = p->tty->termios->c_cflag; -copy: - if (copy_to_user(argm, &tmp, sizeof(tmp))) - return -EFAULT; - } - return 0; - } default: - return (-ENOIOCTLCMD); - case MOXA_LOAD_BIOS: - case MOXA_FIND_BOARD: - case MOXA_LOAD_C320B: - case MOXA_LOAD_CODE: - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - break; - } - - if(copy_from_user(&dltmp, argp, sizeof(struct dl_str))) - return -EFAULT; - if(dltmp.cardno < 0 || dltmp.cardno >= MAX_BOARDS || dltmp.len < 0) - return -EINVAL; - - switch(cmd) - { - case MOXA_LOAD_BIOS: - i = moxaloadbios(dltmp.cardno, dltmp.buf, dltmp.len); - return (i); - case MOXA_FIND_BOARD: - return moxafindcard(dltmp.cardno); - case MOXA_LOAD_C320B: - moxaload320b(dltmp.cardno, dltmp.buf, dltmp.len); - default: /* to keep gcc happy */ - return (0); - case MOXA_LOAD_CODE: - i = moxaloadcode(dltmp.cardno, dltmp.buf, dltmp.len); - if (i == -1) - return (-EFAULT); - return (i); - - } -} - -int MoxaDriverPoll(void) -{ - struct moxa_board_conf *brd; - register ushort temp; - register int card; - void __iomem *ofsAddr; - void __iomem *ip; - int port, p, ports; - - if (moxaCard == 0) - return (-1); - for (card = 0; card < MAX_BOARDS; card++) { - brd = &moxa_boards[card]; - if (brd->loadstat == 0) - continue; - if ((ports = brd->numPorts) == 0) - continue; - if (readb(brd->intPend) == 0xff) { - ip = brd->intTable + readb(brd->intNdx); - p = card * MAX_PORTS_PER_BOARD; - ports <<= 1; - for (port = 0; port < ports; port += 2, p++) { - if ((temp = readw(ip + port)) != 0) { - writew(0, ip + port); - ofsAddr = moxa_ports[p].tableAddr; - if (temp & IntrTx) - writew(readw(ofsAddr + HostStat) & ~WakeupTx, ofsAddr + HostStat); - if (temp & IntrBreak) { - moxa_ports[p].breakCnt++; - } - if (temp & IntrLine) { - if (readb(ofsAddr + FlagStat) & DCD_state) { - if ((moxa_ports[p].DCDState & DCD_oldstate) == 0) - moxa_ports[p].DCDState = (DCD_oldstate | - DCD_changed); - } else { - if (moxa_ports[p].DCDState & DCD_oldstate) - moxa_ports[p].DCDState = DCD_changed; - } - } - } - } - writeb(0, brd->intPend); - } - if (moxaLowWaterChk) { - p = card * MAX_PORTS_PER_BOARD; - for (port = 0; port < ports; port++, p++) { - if (moxa_ports[p].lowChkFlag) { - moxa_ports[p].lowChkFlag = 0; - ofsAddr = moxa_ports[p].tableAddr; - moxa_low_water_check(ofsAddr); - } - } - } - } - moxaLowWaterChk = 0; - return (0); -} - -/***************************************************************************** - * Card level function: * - * 1. MoxaPortsOfCard(int cardno); * - *****************************************************************************/ -int MoxaPortsOfCard(int cardno) -{ - - if (moxa_boards[cardno].boardType == 0) - return (0); - return (moxa_boards[cardno].numPorts); -} - -/***************************************************************************** - * Port level functions: * - * 1. MoxaPortIsValid(int port); * - * 2. MoxaPortEnable(int port); * - * 3. MoxaPortDisable(int port); * - * 4. MoxaPortGetMaxBaud(int port); * - * 6. MoxaPortSetBaud(int port, long baud); * - * 8. MoxaPortSetTermio(int port, unsigned char *termio); * - * 9. MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); * - * 10. MoxaPortLineCtrl(int port, int dtrState, int rtsState); * - * 11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany); * - * 12. MoxaPortLineStatus(int port); * - * 13. MoxaPortDCDChange(int port); * - * 14. MoxaPortDCDON(int port); * - * 15. MoxaPortFlushData(int port, int mode); * - * 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); * - * 17. MoxaPortReadData(int port, struct tty_struct *tty); * - * 20. MoxaPortTxQueue(int port); * - * 21. MoxaPortTxFree(int port); * - * 22. MoxaPortRxQueue(int port); * - * 24. MoxaPortTxDisable(int port); * - * 25. MoxaPortTxEnable(int port); * - * 27. MoxaPortResetBrkCnt(int port); * - * 30. MoxaPortSendBreak(int port, int ticks); * - *****************************************************************************/ -/* - * Moxa Port Number Description: - * - * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And, - * the port number using in MOXA driver functions will be 0 to 31 for - * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96 - * to 127 for fourth. For example, if you setup three MOXA boards, - * first board is C218, second board is C320-16 and third board is - * C320-32. The port number of first board (C218 - 8 ports) is from - * 0 to 7. The port number of second board (C320 - 16 ports) is form - * 32 to 47. The port number of third board (C320 - 32 ports) is from - * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to - * 127 will be invalid. - * - * - * Moxa Functions Description: - * - * Function 1: Driver initialization routine, this routine must be - * called when initialized driver. - * Syntax: - * void MoxaDriverInit(); - * - * - * Function 2: Moxa driver private IOCTL command processing. - * Syntax: - * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); - * - * unsigned int cmd : IOCTL command - * unsigned long arg : IOCTL argument - * int port : port number (0 - 127) - * - * return: 0 (OK) - * -EINVAL - * -ENOIOCTLCMD - * - * - * Function 3: Moxa driver polling process routine. - * Syntax: - * int MoxaDriverPoll(void); - * - * return: 0 ; polling O.K. - * -1 : no any Moxa card. - * - * - * Function 4: Get the ports of this card. - * Syntax: - * int MoxaPortsOfCard(int cardno); - * - * int cardno : card number (0 - 3) - * - * return: 0 : this card is invalid - * 8/16/24/32 - * - * - * Function 5: Check this port is valid or invalid - * Syntax: - * int MoxaPortIsValid(int port); - * int port : port number (0 - 127, ref port description) - * - * return: 0 : this port is invalid - * 1 : this port is valid - * - * - * Function 6: Enable this port to start Tx/Rx data. - * Syntax: - * void MoxaPortEnable(int port); - * int port : port number (0 - 127) - * - * - * Function 7: Disable this port - * Syntax: - * void MoxaPortDisable(int port); - * int port : port number (0 - 127) - * - * - * Function 8: Get the maximun available baud rate of this port. - * Syntax: - * long MoxaPortGetMaxBaud(int port); - * int port : port number (0 - 127) - * - * return: 0 : this port is invalid - * 38400/57600/115200 bps - * - * - * Function 10: Setting baud rate of this port. - * Syntax: - * long MoxaPortSetBaud(int port, long baud); - * int port : port number (0 - 127) - * long baud : baud rate (50 - 115200) - * - * return: 0 : this port is invalid or baud < 50 - * 50 - 115200 : the real baud rate set to the port, if - * the argument baud is large than maximun - * available baud rate, the real setting - * baud rate will be the maximun baud rate. - * - * - * Function 12: Configure the port. - * Syntax: - * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud); - * int port : port number (0 - 127) - * struct ktermios * termio : termio structure pointer - * speed_t baud : baud rate - * - * return: -1 : this port is invalid or termio == NULL - * 0 : setting O.K. - * - * - * Function 13: Get the DTR/RTS state of this port. - * Syntax: - * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); - * int port : port number (0 - 127) - * int * dtrState : pointer to INT to receive the current DTR - * state. (if NULL, this function will not - * write to this address) - * int * rtsState : pointer to INT to receive the current RTS - * state. (if NULL, this function will not - * write to this address) - * - * return: -1 : this port is invalid - * 0 : O.K. - * - * - * Function 14: Setting the DTR/RTS output state of this port. - * Syntax: - * void MoxaPortLineCtrl(int port, int dtrState, int rtsState); - * int port : port number (0 - 127) - * int dtrState : DTR output state (0: off, 1: on) - * int rtsState : RTS output state (0: off, 1: on) - * - * - * Function 15: Setting the flow control of this port. - * Syntax: - * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow, - * int txFlow,int xany); - * int port : port number (0 - 127) - * int rtsFlow : H/W RTS flow control (0: no, 1: yes) - * int ctsFlow : H/W CTS flow control (0: no, 1: yes) - * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes) - * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes) - * int xany : S/W XANY flow control (0: no, 1: yes) - * - * - * Function 16: Get ths line status of this port - * Syntax: - * int MoxaPortLineStatus(int port); - * int port : port number (0 - 127) - * - * return: Bit 0 - CTS state (0: off, 1: on) - * Bit 1 - DSR state (0: off, 1: on) - * Bit 2 - DCD state (0: off, 1: on) - * - * - * Function 17: Check the DCD state has changed since the last read - * of this function. - * Syntax: - * int MoxaPortDCDChange(int port); - * int port : port number (0 - 127) - * - * return: 0 : no changed - * 1 : DCD has changed - * - * - * Function 18: Check ths current DCD state is ON or not. - * Syntax: - * int MoxaPortDCDON(int port); - * int port : port number (0 - 127) - * - * return: 0 : DCD off - * 1 : DCD on - * - * - * Function 19: Flush the Rx/Tx buffer data of this port. - * Syntax: - * void MoxaPortFlushData(int port, int mode); - * int port : port number (0 - 127) - * int mode - * 0 : flush the Rx buffer - * 1 : flush the Tx buffer - * 2 : flush the Rx and Tx buffer - * - * - * Function 20: Write data. - * Syntax: - * int MoxaPortWriteData(int port, unsigned char * buffer, int length); - * int port : port number (0 - 127) - * unsigned char * buffer : pointer to write data buffer. - * int length : write data length - * - * return: 0 - length : real write data length - * - * - * Function 21: Read data. - * Syntax: - * int MoxaPortReadData(int port, struct tty_struct *tty); - * int port : port number (0 - 127) - * struct tty_struct *tty : tty for data - * - * return: 0 - length : real read data length - * - * - * Function 24: Get the Tx buffer current queued data bytes - * Syntax: - * int MoxaPortTxQueue(int port); - * int port : port number (0 - 127) - * - * return: .. : Tx buffer current queued data bytes - * - * - * Function 25: Get the Tx buffer current free space - * Syntax: - * int MoxaPortTxFree(int port); - * int port : port number (0 - 127) - * - * return: .. : Tx buffer current free space - * - * - * Function 26: Get the Rx buffer current queued data bytes - * Syntax: - * int MoxaPortRxQueue(int port); - * int port : port number (0 - 127) - * - * return: .. : Rx buffer current queued data bytes - * - * - * Function 28: Disable port data transmission. - * Syntax: - * void MoxaPortTxDisable(int port); - * int port : port number (0 - 127) - * - * - * Function 29: Enable port data transmission. - * Syntax: - * void MoxaPortTxEnable(int port); - * int port : port number (0 - 127) - * - * - * Function 31: Get the received BREAK signal count and reset it. - * Syntax: - * int MoxaPortResetBrkCnt(int port); - * int port : port number (0 - 127) - * - * return: 0 - .. : BREAK signal count - * - * - * Function 34: Send out a BREAK signal. - * Syntax: - * void MoxaPortSendBreak(int port, int ms100); - * int port : port number (0 - 127) - * int ms100 : break signal time interval. - * unit: 100 mini-second. if ms100 == 0, it will - * send out a about 250 ms BREAK signal. - * - */ -int MoxaPortIsValid(int port) -{ - - if (moxaCard == 0) - return (0); - if (moxa_ports[port].chkPort == 0) - return (0); - return (1); -} - -void MoxaPortEnable(int port) -{ - void __iomem *ofsAddr; - int MoxaPortLineStatus(int); - short lowwater = 512; - - ofsAddr = moxa_ports[port].tableAddr; - writew(lowwater, ofsAddr + Low_water); - moxa_ports[port].breakCnt = 0; - if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) || - (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) { - moxafunc(ofsAddr, FC_SetBreakIrq, 0); - } else { - writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat); - } - - moxafunc(ofsAddr, FC_SetLineIrq, Magic_code); - moxafunc(ofsAddr, FC_FlushQueue, 2); - - moxafunc(ofsAddr, FC_EnableCH, Magic_code); - MoxaPortLineStatus(port); -} - -void MoxaPortDisable(int port) -{ - void __iomem *ofsAddr = moxa_ports[port].tableAddr; - - moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */ - moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code); - writew(0, ofsAddr + HostStat); - moxafunc(ofsAddr, FC_DisableCH, Magic_code); -} - -long MoxaPortGetMaxBaud(int port) -{ - if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) || - (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) - return (460800L); - else - return (921600L); -} - - -long MoxaPortSetBaud(int port, long baud) -{ - void __iomem *ofsAddr; - long max, clock; - unsigned int val; - - if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0)) - return (0); - ofsAddr = moxa_ports[port].tableAddr; - if (baud > max) - baud = max; - if (max == 38400L) - clock = 614400L; /* for 9.8304 Mhz : max. 38400 bps */ - else if (max == 57600L) - clock = 691200L; /* for 11.0592 Mhz : max. 57600 bps */ - else - clock = 921600L; /* for 14.7456 Mhz : max. 115200 bps */ - val = clock / baud; - moxafunc(ofsAddr, FC_SetBaud, val); - baud = clock / val; - moxa_ports[port].curBaud = baud; - return (baud); -} - -int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud) -{ - void __iomem *ofsAddr; - tcflag_t cflag; - tcflag_t mode = 0; - - if (moxa_ports[port].chkPort == 0 || termio == 0) - return (-1); - ofsAddr = moxa_ports[port].tableAddr; - cflag = termio->c_cflag; /* termio->c_cflag */ - - mode = termio->c_cflag & CSIZE; - if (mode == CS5) - mode = MX_CS5; - else if (mode == CS6) - mode = MX_CS6; - else if (mode == CS7) - mode = MX_CS7; - else if (mode == CS8) - mode = MX_CS8; - - if (termio->c_cflag & CSTOPB) { - if (mode == MX_CS5) - mode |= MX_STOP15; - else - mode |= MX_STOP2; - } else - mode |= MX_STOP1; - - if (termio->c_cflag & PARENB) { - if (termio->c_cflag & PARODD) - mode |= MX_PARODD; - else - mode |= MX_PAREVEN; - } else - mode |= MX_PARNONE; - - moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode); - - if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) || - (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) { - if (baud >= 921600L) - return (-1); - } - baud = MoxaPortSetBaud(port, baud); - - if (termio->c_iflag & (IXON | IXOFF | IXANY)) { - writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); - writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); - writeb(FC_SetXonXoff, ofsAddr + FuncCode); - moxa_wait_finish(ofsAddr); - - } - return (baud); -} - -int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState) -{ - - if (!MoxaPortIsValid(port)) - return (-1); - if (dtrState) { - if (moxa_ports[port].lineCtrl & DTR_ON) - *dtrState = 1; - else - *dtrState = 0; - } - if (rtsState) { - if (moxa_ports[port].lineCtrl & RTS_ON) - *rtsState = 1; - else - *rtsState = 0; - } - return (0); -} - -void MoxaPortLineCtrl(int port, int dtr, int rts) -{ - void __iomem *ofsAddr; - int mode; - - ofsAddr = moxa_ports[port].tableAddr; - mode = 0; - if (dtr) - mode |= DTR_ON; - if (rts) - mode |= RTS_ON; - moxa_ports[port].lineCtrl = mode; - moxafunc(ofsAddr, FC_LineControl, mode); -} - -void MoxaPortFlowCtrl(int port, int rts, int cts, int txflow, int rxflow, int txany) -{ - void __iomem *ofsAddr; - int mode; - - ofsAddr = moxa_ports[port].tableAddr; - mode = 0; - if (rts) - mode |= RTS_FlowCtl; - if (cts) - mode |= CTS_FlowCtl; - if (txflow) - mode |= Tx_FlowCtl; - if (rxflow) - mode |= Rx_FlowCtl; - if (txany) - mode |= IXM_IXANY; - moxafunc(ofsAddr, FC_SetFlowCtl, mode); -} - -int MoxaPortLineStatus(int port) -{ - void __iomem *ofsAddr; - int val; - - ofsAddr = moxa_ports[port].tableAddr; - if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) || - (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) { - moxafunc(ofsAddr, FC_LineStatus, 0); - val = readw(ofsAddr + FuncArg); - } else { - val = readw(ofsAddr + FlagStat) >> 4; - } - val &= 0x0B; - if (val & 8) { - val |= 4; - if ((moxa_ports[port].DCDState & DCD_oldstate) == 0) - moxa_ports[port].DCDState = (DCD_oldstate | DCD_changed); - } else { - if (moxa_ports[port].DCDState & DCD_oldstate) - moxa_ports[port].DCDState = DCD_changed; - } - val &= 7; - return (val); -} - -int MoxaPortDCDChange(int port) -{ - int n; - - if (moxa_ports[port].chkPort == 0) - return (0); - n = moxa_ports[port].DCDState; - moxa_ports[port].DCDState &= ~DCD_changed; - n &= DCD_changed; - return (n); -} - -int MoxaPortDCDON(int port) -{ - int n; - - if (moxa_ports[port].chkPort == 0) - return (0); - if (moxa_ports[port].DCDState & DCD_oldstate) - n = 1; - else - n = 0; - return (n); -} - -int MoxaPortWriteData(int port, unsigned char * buffer, int len) -{ - int c, total, i; - ushort tail; - int cnt; - ushort head, tx_mask, spage, epage; - ushort pageno, pageofs, bufhead; - void __iomem *baseAddr, *ofsAddr, *ofs; - - ofsAddr = moxa_ports[port].tableAddr; - baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem; - tx_mask = readw(ofsAddr + TX_mask); - spage = readw(ofsAddr + Page_txb); - epage = readw(ofsAddr + EndPage_txb); - tail = readw(ofsAddr + TXwptr); - head = readw(ofsAddr + TXrptr); - c = (head > tail) ? (head - tail - 1) - : (head - tail + tx_mask); - if (c > len) - c = len; - moxaLog.txcnt[port] += c; - total = c; - if (spage == epage) { - bufhead = readw(ofsAddr + Ofs_txb); - writew(spage, baseAddr + Control_reg); - while (c > 0) { - if (head > tail) - len = head - tail - 1; - else - len = tx_mask + 1 - tail; - len = (c > len) ? len : c; - ofs = baseAddr + DynPage_addr + bufhead + tail; - for (i = 0; i < len; i++) - writeb(*buffer++, ofs + i); - tail = (tail + len) & tx_mask; - c -= len; - } - writew(tail, ofsAddr + TXwptr); - } else { - len = c; - pageno = spage + (tail >> 13); - pageofs = tail & Page_mask; - do { - cnt = Page_size - pageofs; - if (cnt > c) - cnt = c; - c -= cnt; - writeb(pageno, baseAddr + Control_reg); - ofs = baseAddr + DynPage_addr + pageofs; - for (i = 0; i < cnt; i++) - writeb(*buffer++, ofs + i); - if (c == 0) { - writew((tail + len) & tx_mask, ofsAddr + TXwptr); - break; - } - if (++pageno == epage) - pageno = spage; - pageofs = 0; - } while (1); - } - writeb(1, ofsAddr + CD180TXirq); /* start to send */ - return (total); -} - -int MoxaPortReadData(int port, struct tty_struct *tty) -{ - register ushort head, pageofs; - int i, count, cnt, len, total, remain; - ushort tail, rx_mask, spage, epage; - ushort pageno, bufhead; - void __iomem *baseAddr, *ofsAddr, *ofs; - - ofsAddr = moxa_ports[port].tableAddr; - baseAddr = moxa_boards[port / MAX_PORTS_PER_BOARD].basemem; - head = readw(ofsAddr + RXrptr); - tail = readw(ofsAddr + RXwptr); - rx_mask = readw(ofsAddr + RX_mask); - spage = readw(ofsAddr + Page_rxb); - epage = readw(ofsAddr + EndPage_rxb); - count = (tail >= head) ? (tail - head) - : (tail - head + rx_mask + 1); - if (count == 0) - return 0; - - total = count; - remain = count - total; - moxaLog.rxcnt[port] += total; - count = total; - if (spage == epage) { - bufhead = readw(ofsAddr + Ofs_rxb); - writew(spage, baseAddr + Control_reg); - while (count > 0) { - if (tail >= head) - len = tail - head; - else - len = rx_mask + 1 - head; - len = (count > len) ? len : count; - ofs = baseAddr + DynPage_addr + bufhead + head; - for (i = 0; i < len; i++) - tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL); - head = (head + len) & rx_mask; - count -= len; - } - writew(head, ofsAddr + RXrptr); - } else { - len = count; - pageno = spage + (head >> 13); - pageofs = head & Page_mask; - do { - cnt = Page_size - pageofs; - if (cnt > count) - cnt = count; - count -= cnt; - writew(pageno, baseAddr + Control_reg); - ofs = baseAddr + DynPage_addr + pageofs; - for (i = 0; i < cnt; i++) - tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL); - if (count == 0) { - writew((head + len) & rx_mask, ofsAddr + RXrptr); - break; - } - if (++pageno == epage) - pageno = spage; - pageofs = 0; - } while (1); - } - if ((readb(ofsAddr + FlagStat) & Xoff_state) && (remain < LowWater)) { - moxaLowWaterChk = 1; - moxa_ports[port].lowChkFlag = 1; - } - return (total); -} - - -int MoxaPortTxQueue(int port) -{ - void __iomem *ofsAddr; - ushort rptr, wptr, mask; - int len; - - ofsAddr = moxa_ports[port].tableAddr; - rptr = readw(ofsAddr + TXrptr); - wptr = readw(ofsAddr + TXwptr); - mask = readw(ofsAddr + TX_mask); - len = (wptr - rptr) & mask; - return (len); -} - -int MoxaPortTxFree(int port) -{ - void __iomem *ofsAddr; - ushort rptr, wptr, mask; - int len; - - ofsAddr = moxa_ports[port].tableAddr; - rptr = readw(ofsAddr + TXrptr); - wptr = readw(ofsAddr + TXwptr); - mask = readw(ofsAddr + TX_mask); - len = mask - ((wptr - rptr) & mask); - return (len); -} - -int MoxaPortRxQueue(int port) -{ - void __iomem *ofsAddr; - ushort rptr, wptr, mask; - int len; - - ofsAddr = moxa_ports[port].tableAddr; - rptr = readw(ofsAddr + RXrptr); - wptr = readw(ofsAddr + RXwptr); - mask = readw(ofsAddr + RX_mask); - len = (wptr - rptr) & mask; - return (len); -} - - -void MoxaPortTxDisable(int port) -{ - void __iomem *ofsAddr; - - ofsAddr = moxa_ports[port].tableAddr; - moxafunc(ofsAddr, FC_SetXoffState, Magic_code); -} - -void MoxaPortTxEnable(int port) -{ - void __iomem *ofsAddr; - - ofsAddr = moxa_ports[port].tableAddr; - moxafunc(ofsAddr, FC_SetXonState, Magic_code); -} - - -int MoxaPortResetBrkCnt(int port) -{ - ushort cnt; - cnt = moxa_ports[port].breakCnt; - moxa_ports[port].breakCnt = 0; - return (cnt); -} - - -void MoxaPortSendBreak(int port, int ms100) -{ - void __iomem *ofsAddr; - - ofsAddr = moxa_ports[port].tableAddr; - if (ms100) { - moxafunc(ofsAddr, FC_SendBreak, Magic_code); - msleep(ms100 * 10); - } else { - moxafunc(ofsAddr, FC_SendBreak, Magic_code); - msleep(250); - } - moxafunc(ofsAddr, FC_StopBreak, Magic_code); -} - -static int moxa_get_serial_info(struct moxa_port *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->port; - tmp.port = 0; - tmp.irq = 0; - tmp.flags = info->asyncflags; - tmp.baud_base = 921600; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = 0; - tmp.hub6 = 0; - if(copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return (0); -} - - -static int moxa_set_serial_info(struct moxa_port *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - - if(copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if ((new_serial.irq != 0) || - (new_serial.port != 0) || -// (new_serial.type != info->type) || - (new_serial.custom_divisor != 0) || - (new_serial.baud_base != 921600)) - return (-EPERM); - - if (!capable(CAP_SYS_ADMIN)) { - if (((new_serial.flags & ~ASYNC_USR_MASK) != - (info->asyncflags & ~ASYNC_USR_MASK))) - return (-EPERM); - } else { - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - } - - new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS); - new_serial.flags |= (info->asyncflags & ASYNC_FLAGS); - - if (new_serial.type == PORT_16550A) { - MoxaSetFifo(info->port, 1); - } else { - MoxaSetFifo(info->port, 0); - } - - info->type = new_serial.type; - return (0); -} - - - -/***************************************************************************** - * Static local functions: * - *****************************************************************************/ -static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg) -{ - - writew(arg, ofsAddr + FuncArg); - writew(cmd, ofsAddr + FuncCode); - moxa_wait_finish(ofsAddr); -} - -static void moxa_wait_finish(void __iomem *ofsAddr) -{ - unsigned long i, j; - - i = jiffies; - while (readw(ofsAddr + FuncCode) != 0) { - j = jiffies; - if ((j - i) > moxaFuncTout) { - return; - } - } -} - -static void moxa_low_water_check(void __iomem *ofsAddr) -{ - int len; - ushort rptr, wptr, mask; - - if (readb(ofsAddr + FlagStat) & Xoff_state) { - rptr = readw(ofsAddr + RXrptr); - wptr = readw(ofsAddr + RXwptr); - mask = readw(ofsAddr + RX_mask); - len = (wptr - rptr) & mask; - if (len <= Low_water) - moxafunc(ofsAddr, FC_SendXon, 0); - } -} - -static int moxaloadbios(int cardno, unsigned char __user *tmp, int len) -{ - void __iomem *baseAddr; - int i; - - if(len < 0 || len > sizeof(moxaBuff)) - return -EINVAL; - if(copy_from_user(moxaBuff, tmp, len)) - return -EFAULT; - baseAddr = moxa_boards[cardno].basemem; - writeb(HW_reset, baseAddr + Control_reg); /* reset */ - msleep(10); - for (i = 0; i < 4096; i++) - writeb(0, baseAddr + i); /* clear fix page */ - for (i = 0; i < len; i++) - writeb(moxaBuff[i], baseAddr + i); /* download BIOS */ - writeb(0, baseAddr + Control_reg); /* restart */ - return (0); -} - -static int moxafindcard(int cardno) -{ - void __iomem *baseAddr; - ushort tmp; - - baseAddr = moxa_boards[cardno].basemem; - switch (moxa_boards[cardno].boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - if ((tmp = readw(baseAddr + C218_key)) != C218_KeyCode) { - return (-1); - } - break; - case MOXA_BOARD_CP204J: - if ((tmp = readw(baseAddr + C218_key)) != CP204J_KeyCode) { - return (-1); - } - break; - default: - if ((tmp = readw(baseAddr + C320_key)) != C320_KeyCode) { - return (-1); - } - if ((tmp = readw(baseAddr + C320_status)) != STS_init) { - return (-2); - } - } - return (0); -} - -static int moxaload320b(int cardno, unsigned char __user *tmp, int len) -{ - void __iomem *baseAddr; - int i; - - if(len < 0 || len > sizeof(moxaBuff)) - return -EINVAL; - if(copy_from_user(moxaBuff, tmp, len)) - return -EFAULT; - baseAddr = moxa_boards[cardno].basemem; - writew(len - 7168 - 2, baseAddr + C320bapi_len); - writeb(1, baseAddr + Control_reg); /* Select Page 1 */ - for (i = 0; i < 7168; i++) - writeb(moxaBuff[i], baseAddr + DynPage_addr + i); - writeb(2, baseAddr + Control_reg); /* Select Page 2 */ - for (i = 0; i < (len - 7168); i++) - writeb(moxaBuff[i + 7168], baseAddr + DynPage_addr + i); - return (0); -} - -static int moxaloadcode(int cardno, unsigned char __user *tmp, int len) -{ - void __iomem *baseAddr, *ofsAddr; - int retval, port, i; - - if(len < 0 || len > sizeof(moxaBuff)) - return -EINVAL; - if(copy_from_user(moxaBuff, tmp, len)) - return -EFAULT; - baseAddr = moxa_boards[cardno].basemem; - switch (moxa_boards[cardno].boardType) { - case MOXA_BOARD_C218_ISA: - case MOXA_BOARD_C218_PCI: - case MOXA_BOARD_CP204J: - retval = moxaloadc218(cardno, baseAddr, len); - if (retval) - return (retval); - port = cardno * MAX_PORTS_PER_BOARD; - for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) { - struct moxa_port *p = &moxa_ports[port]; - - p->chkPort = 1; - p->curBaud = 9600L; - p->DCDState = 0; - p->tableAddr = baseAddr + Extern_table + Extern_size * i; - ofsAddr = p->tableAddr; - writew(C218rx_mask, ofsAddr + RX_mask); - writew(C218tx_mask, ofsAddr + TX_mask); - writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb); - - writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb); - - } - break; - default: - retval = moxaloadc320(cardno, baseAddr, len, - &moxa_boards[cardno].numPorts); - if (retval) - return (retval); - port = cardno * MAX_PORTS_PER_BOARD; - for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) { - struct moxa_port *p = &moxa_ports[port]; - - p->chkPort = 1; - p->curBaud = 9600L; - p->DCDState = 0; - p->tableAddr = baseAddr + Extern_table + Extern_size * i; - ofsAddr = p->tableAddr; - if (moxa_boards[cardno].numPorts == 8) { - writew(C320p8rx_mask, ofsAddr + RX_mask); - writew(C320p8tx_mask, ofsAddr + TX_mask); - writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb); - - } else if (moxa_boards[cardno].numPorts == 16) { - writew(C320p16rx_mask, ofsAddr + RX_mask); - writew(C320p16tx_mask, ofsAddr + TX_mask); - writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb); - - } else if (moxa_boards[cardno].numPorts == 24) { - writew(C320p24rx_mask, ofsAddr + RX_mask); - writew(C320p24tx_mask, ofsAddr + TX_mask); - writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb); - writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb); - writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); - } else if (moxa_boards[cardno].numPorts == 32) { - writew(C320p32rx_mask, ofsAddr + RX_mask); - writew(C320p32tx_mask, ofsAddr + TX_mask); - writew(C320p32tx_ofs, ofsAddr + Ofs_txb); - writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb); - writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb); - writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb); - writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); - } - } - break; - } - moxa_boards[cardno].loadstat = 1; - return (0); -} - -static int moxaloadc218(int cardno, void __iomem *baseAddr, int len) -{ - char retry; - int i, j, len1, len2; - ushort usum, *ptr, keycode; - - if (moxa_boards[cardno].boardType == MOXA_BOARD_CP204J) - keycode = CP204J_KeyCode; - else - keycode = C218_KeyCode; - usum = 0; - len1 = len >> 1; - ptr = (ushort *) moxaBuff; - for (i = 0; i < len1; i++) - usum += le16_to_cpu(*(ptr + i)); - retry = 0; - do { - len1 = len >> 1; - j = 0; - while (len1) { - len2 = (len1 > 2048) ? 2048 : len1; - len1 -= len2; - for (i = 0; i < len2 << 1; i++) - writeb(moxaBuff[i + j], baseAddr + C218_LoadBuf + i); - j += i; - - writew(len2, baseAddr + C218DLoad_len); - writew(0, baseAddr + C218_key); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + C218_key) == keycode) - break; - msleep(10); - } - if (readw(baseAddr + C218_key) != keycode) { - return (-1); - } - } - writew(0, baseAddr + C218DLoad_len); - writew(usum, baseAddr + C218check_sum); - writew(0, baseAddr + C218_key); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + C218_key) == keycode) - break; - msleep(10); - } - retry++; - } while ((readb(baseAddr + C218chksum_ok) != 1) && (retry < 3)); - if (readb(baseAddr + C218chksum_ok) != 1) { - return (-1); - } - writew(0, baseAddr + C218_key); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) { - return (-1); - } - writew(1, baseAddr + Disable_IRQ); - writew(0, baseAddr + Magic_no); - for (i = 0; i < 100; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) { - return (-1); - } - moxaCard = 1; - moxa_boards[cardno].intNdx = baseAddr + IRQindex; - moxa_boards[cardno].intPend = baseAddr + IRQpending; - moxa_boards[cardno].intTable = baseAddr + IRQtable; - return (0); -} - -static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPorts) -{ - ushort usum; - int i, j, wlen, len2, retry; - ushort *uptr; - - usum = 0; - wlen = len >> 1; - uptr = (ushort *) moxaBuff; - for (i = 0; i < wlen; i++) - usum += le16_to_cpu(uptr[i]); - retry = 0; - j = 0; - do { - while (wlen) { - if (wlen > 2048) - len2 = 2048; - else - len2 = wlen; - wlen -= len2; - len2 <<= 1; - for (i = 0; i < len2; i++) - writeb(moxaBuff[j + i], baseAddr + C320_LoadBuf + i); - len2 >>= 1; - j += i; - writew(len2, baseAddr + C320DLoad_len); - writew(0, baseAddr + C320_key); - for (i = 0; i < 10; i++) { - if (readw(baseAddr + C320_key) == C320_KeyCode) - break; - msleep(10); - } - if (readw(baseAddr + C320_key) != C320_KeyCode) - return (-1); - } - writew(0, baseAddr + C320DLoad_len); - writew(usum, baseAddr + C320check_sum); - writew(0, baseAddr + C320_key); - for (i = 0; i < 10; i++) { - if (readw(baseAddr + C320_key) == C320_KeyCode) - break; - msleep(10); - } - retry++; - } while ((readb(baseAddr + C320chksum_ok) != 1) && (retry < 3)); - if (readb(baseAddr + C320chksum_ok) != 1) - return (-1); - writew(0, baseAddr + C320_key); - for (i = 0; i < 600; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return (-100); - - if (moxa_boards[cardno].busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */ - writew(0x3800, baseAddr + TMS320_PORT1); - writew(0x3900, baseAddr + TMS320_PORT2); - writew(28499, baseAddr + TMS320_CLOCK); - } else { - writew(0x3200, baseAddr + TMS320_PORT1); - writew(0x3400, baseAddr + TMS320_PORT2); - writew(19999, baseAddr + TMS320_CLOCK); - } - writew(1, baseAddr + Disable_IRQ); - writew(0, baseAddr + Magic_no); - for (i = 0; i < 500; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return (-102); - - j = readw(baseAddr + Module_cnt); - if (j <= 0) - return (-101); - *numPorts = j * 8; - writew(j, baseAddr + Module_no); - writew(0, baseAddr + Magic_no); - for (i = 0; i < 600; i++) { - if (readw(baseAddr + Magic_no) == Magic_code) - break; - msleep(10); - } - if (readw(baseAddr + Magic_no) != Magic_code) - return (-102); - moxaCard = 1; - moxa_boards[cardno].intNdx = baseAddr + IRQindex; - moxa_boards[cardno].intPend = baseAddr + IRQpending; - moxa_boards[cardno].intTable = baseAddr + IRQtable; - return (0); -} - -static void MoxaSetFifo(int port, int enable) -{ - void __iomem *ofsAddr = moxa_ports[port].tableAddr; - - if (!enable) { - moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0); - moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1); - } else { - moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3); - moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16); - } -} |