diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_watchdog.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_watchdog.c | 603 |
1 files changed, 367 insertions, 236 deletions
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 41f78e2c158..37b8be7cba9 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -35,6 +35,7 @@ #include <linux/moduleparam.h> #include <linux/ipmi.h> #include <linux/ipmi_smi.h> +#include <linux/mutex.h> #include <linux/watchdog.h> #include <linux/miscdevice.h> #include <linux/init.h> @@ -50,10 +51,22 @@ #include <linux/poll.h> #include <linux/string.h> #include <linux/ctype.h> -#include <asm/atomic.h> +#include <linux/delay.h> +#include <linux/atomic.h> -#ifdef CONFIG_X86_LOCAL_APIC -#include <asm/apic.h> +#ifdef CONFIG_X86 +/* + * This is ugly, but I've determined that x86 is the only architecture + * that can reasonably support the IPMI NMI watchdog timeout at this + * time. If another architecture adds this capability somehow, it + * will have to be a somewhat different mechanism and I have no idea + * how it will work. So in the unlikely event that another + * architecture supports this, we can figure out a good generic + * mechanism for it at that time. + */ +#include <asm/kdebug.h> +#include <asm/nmi.h> +#define HAVE_DIE_NMI #endif #define PFX "IPMI Watchdog: " @@ -86,9 +99,8 @@ /* Operations that can be performed on a pretimout. */ #define WDOG_PREOP_NONE 0 #define WDOG_PREOP_PANIC 1 -#define WDOG_PREOP_GIVE_DATA 2 /* Cause data to be available to - read. Doesn't work in NMI - mode. */ +/* Cause data to be available to read. Doesn't work in NMI mode. */ +#define WDOG_PREOP_GIVE_DATA 2 /* Actions to perform on a full timeout. */ #define WDOG_SET_TIMEOUT_ACT(byte, use) \ @@ -99,8 +111,10 @@ #define WDOG_TIMEOUT_POWER_DOWN 2 #define WDOG_TIMEOUT_POWER_CYCLE 3 -/* Byte 3 of the get command, byte 4 of the get response is the - pre-timeout in seconds. */ +/* + * Byte 3 of the get command, byte 4 of the get response is the + * pre-timeout in seconds. + */ /* Bits for setting byte 4 of the set command, byte 5 of the get response. */ #define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1) @@ -109,11 +123,13 @@ #define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4) #define WDOG_EXPIRE_CLEAR_OEM (1 << 5) -/* Setting/getting the watchdog timer value. This is for bytes 5 and - 6 (the timeout time) of the set command, and bytes 6 and 7 (the - timeout time) and 8 and 9 (the current countdown value) of the - response. The timeout value is given in seconds (in the command it - is 100ms intervals). */ +/* + * Setting/getting the watchdog timer value. This is for bytes 5 and + * 6 (the timeout time) of the set command, and bytes 6 and 7 (the + * timeout time) and 8 and 9 (the current countdown value) of the + * response. The timeout value is given in seconds (in the command it + * is 100ms intervals). + */ #define WDOG_SET_TIMEOUT(byte1, byte2, val) \ (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8) #define WDOG_GET_TIMEOUT(byte1, byte2) \ @@ -123,18 +139,10 @@ #define IPMI_WDOG_SET_TIMER 0x24 #define IPMI_WDOG_GET_TIMER 0x25 -/* These are here until the real ones get into the watchdog.h interface. */ -#ifndef WDIOC_GETTIMEOUT -#define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int) -#endif -#ifndef WDIOC_SET_PRETIMEOUT -#define WDIOC_SET_PRETIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 21, int) -#endif -#ifndef WDIOC_GET_PRETIMEOUT -#define WDIOC_GET_PRETIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 22, int) -#endif +#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80 -static int nowayout = WATCHDOG_NOWAYOUT; +static DEFINE_MUTEX(ipmi_watchdog_mutex); +static bool nowayout = WATCHDOG_NOWAYOUT; static ipmi_user_t watchdog_user; static int watchdog_ifnum; @@ -166,8 +174,6 @@ static char expect_close; static int ifnum_to_use = -1; -static DECLARE_RWSEM(register_sem); - /* Parameters to ipmi_set_timeout */ #define IPMI_SET_TIMEOUT_NO_HB 0 #define IPMI_SET_TIMEOUT_HB_IF_NECESSARY 1 @@ -177,11 +183,13 @@ static int ipmi_set_timeout(int do_heartbeat); static void ipmi_register_watchdog(int ipmi_intf); static void ipmi_unregister_watchdog(int ipmi_intf); -/* If true, the driver will start running as soon as it is configured - and ready. */ +/* + * If true, the driver will start running as soon as it is configured + * and ready. + */ static int start_now; -static int set_param_int(const char *val, struct kernel_param *kp) +static int set_param_timeout(const char *val, const struct kernel_param *kp) { char *endp; int l; @@ -193,19 +201,18 @@ static int set_param_int(const char *val, struct kernel_param *kp) if (endp == val) return -EINVAL; - down_read(®ister_sem); *((int *)kp->arg) = l; if (watchdog_user) rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); - up_read(®ister_sem); return rv; } -static int get_param_int(char *buffer, struct kernel_param *kp) -{ - return sprintf(buffer, "%i", *((int *)kp->arg)); -} +static struct kernel_param_ops param_ops_timeout = { + .set = set_param_timeout, + .get = param_get_int, +}; +#define param_check_timeout param_check_int typedef int (*action_fn)(const char *intval, char *outval); @@ -214,7 +221,7 @@ static int preaction_op(const char *inval, char *outval); static int preop_op(const char *inval, char *outval); static void check_parms(void); -static int set_param_str(const char *val, struct kernel_param *kp) +static int set_param_str(const char *val, const struct kernel_param *kp) { action_fn fn = (action_fn) kp->arg; int rv = 0; @@ -226,21 +233,19 @@ static int set_param_str(const char *val, struct kernel_param *kp) s = strstrip(valcp); - down_read(®ister_sem); rv = fn(s, NULL); if (rv) - goto out_unlock; + goto out; check_parms(); if (watchdog_user) rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); - out_unlock: - up_read(®ister_sem); + out: return rv; } -static int get_param_str(char *buffer, struct kernel_param *kp) +static int get_param_str(char *buffer, const struct kernel_param *kp) { action_fn fn = (action_fn) kp->arg; int rv; @@ -252,7 +257,7 @@ static int get_param_str(char *buffer, struct kernel_param *kp) } -static int set_param_wdog_ifnum(const char *val, struct kernel_param *kp) +static int set_param_wdog_ifnum(const char *val, const struct kernel_param *kp) { int rv = param_set_int(val, kp); if (rv) @@ -265,27 +270,38 @@ static int set_param_wdog_ifnum(const char *val, struct kernel_param *kp) return 0; } -module_param_call(ifnum_to_use, set_param_wdog_ifnum, get_param_int, - &ifnum_to_use, 0644); +static struct kernel_param_ops param_ops_wdog_ifnum = { + .set = set_param_wdog_ifnum, + .get = param_get_int, +}; + +#define param_check_wdog_ifnum param_check_int + +static struct kernel_param_ops param_ops_str = { + .set = set_param_str, + .get = get_param_str, +}; + +module_param(ifnum_to_use, wdog_ifnum, 0644); MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " "timer. Setting to -1 defaults to the first registered " "interface"); -module_param_call(timeout, set_param_int, get_param_int, &timeout, 0644); +module_param(timeout, timeout, 0644); MODULE_PARM_DESC(timeout, "Timeout value in seconds."); -module_param_call(pretimeout, set_param_int, get_param_int, &pretimeout, 0644); +module_param(pretimeout, timeout, 0644); MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds."); -module_param_call(action, set_param_str, get_param_str, action_op, 0644); +module_param_cb(action, ¶m_ops_str, action_op, 0644); MODULE_PARM_DESC(action, "Timeout action. One of: " "reset, none, power_cycle, power_off."); -module_param_call(preaction, set_param_str, get_param_str, preaction_op, 0644); +module_param_cb(preaction, ¶m_ops_str, preaction_op, 0644); MODULE_PARM_DESC(preaction, "Pretimeout action. One of: " "pre_none, pre_smi, pre_nmi, pre_int."); -module_param_call(preop, set_param_str, get_param_str, preop_op, 0644); +module_param_cb(preop, ¶m_ops_str, preop_op, 0644); MODULE_PARM_DESC(preop, "Pretimeout driver operation. One of: " "preop_none, preop_panic, preop_give_data."); @@ -293,7 +309,7 @@ module_param(start_now, int, 0444); MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" "soon as the driver is loaded."); -module_param(nowayout, int, 0644); +module_param(nowayout, bool, 0644); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=CONFIG_WATCHDOG_NOWAYOUT)"); @@ -306,10 +322,12 @@ static int ipmi_ignore_heartbeat; /* Is someone using the watchdog? Only one user is allowed. */ static unsigned long ipmi_wdog_open; -/* If set to 1, the heartbeat command will set the state to reset and - start the timer. The timer doesn't normally run when the driver is - first opened until the heartbeat is set the first time, this - variable is used to accomplish this. */ +/* + * If set to 1, the heartbeat command will set the state to reset and + * start the timer. The timer doesn't normally run when the driver is + * first opened until the heartbeat is set the first time, this + * variable is used to accomplish this. + */ static int ipmi_start_timer_on_heartbeat; /* IPMI version of the BMC. */ @@ -319,14 +337,19 @@ static unsigned char ipmi_version_minor; /* If a pretimeout occurs, this is used to allow only one panic to happen. */ static atomic_t preop_panic_excl = ATOMIC_INIT(-1); -static int ipmi_heartbeat(void); -static void panic_halt_ipmi_heartbeat(void); +#ifdef HAVE_DIE_NMI +static int testing_nmi; +static int nmi_handler_registered; +#endif +static int ipmi_heartbeat(void); -/* We use a mutex to make sure that only one thing can send a set - timeout at one time, because we only have one copy of the data. - The mutex is claimed when the set_timeout is sent and freed - when both messages are free. */ +/* + * We use a mutex to make sure that only one thing can send a set + * timeout at one time, because we only have one copy of the data. + * The mutex is claimed when the set_timeout is sent and freed + * when both messages are free. + */ static atomic_t set_timeout_tofree = ATOMIC_INIT(0); static DEFINE_MUTEX(set_timeout_lock); static DECLARE_COMPLETION(set_timeout_wait); @@ -340,15 +363,13 @@ static void set_timeout_free_recv(struct ipmi_recv_msg *msg) if (atomic_dec_and_test(&set_timeout_tofree)) complete(&set_timeout_wait); } -static struct ipmi_smi_msg set_timeout_smi_msg = -{ +static struct ipmi_smi_msg set_timeout_smi_msg = { .done = set_timeout_free_smi }; -static struct ipmi_recv_msg set_timeout_recv_msg = -{ +static struct ipmi_recv_msg set_timeout_recv_msg = { .done = set_timeout_free_recv }; - + static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, struct ipmi_recv_msg *recv_msg, int *send_heartbeat_now) @@ -360,17 +381,21 @@ static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, int hbnow = 0; + /* These can be cleared as we are setting the timeout. */ + pretimeout_since_last_heartbeat = 0; + data[0] = 0; WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); if ((ipmi_version_major > 1) - || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) - { + || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) { /* This is an IPMI 1.5-only feature. */ data[0] |= WDOG_DONT_STOP_ON_SET; } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { - /* In ipmi 1.0, setting the timer stops the watchdog, we - need to start it back up again. */ + /* + * In ipmi 1.0, setting the timer stops the watchdog, we + * need to start it back up again. + */ hbnow = 1; } @@ -434,55 +459,112 @@ static int ipmi_set_timeout(int do_heartbeat) wait_for_completion(&set_timeout_wait); + mutex_unlock(&set_timeout_lock); + if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB) || ((send_heartbeat_now) && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY))) - { rv = ipmi_heartbeat(); - } - mutex_unlock(&set_timeout_lock); out: return rv; } -static void dummy_smi_free(struct ipmi_smi_msg *msg) +static atomic_t panic_done_count = ATOMIC_INIT(0); + +static void panic_smi_free(struct ipmi_smi_msg *msg) { + atomic_dec(&panic_done_count); } -static void dummy_recv_free(struct ipmi_recv_msg *msg) +static void panic_recv_free(struct ipmi_recv_msg *msg) { + atomic_dec(&panic_done_count); } -static struct ipmi_smi_msg panic_halt_smi_msg = -{ - .done = dummy_smi_free + +static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = { + .done = panic_smi_free }; -static struct ipmi_recv_msg panic_halt_recv_msg = +static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = { + .done = panic_recv_free +}; + +static void panic_halt_ipmi_heartbeat(void) { - .done = dummy_recv_free + struct kernel_ipmi_msg msg; + struct ipmi_system_interface_addr addr; + int rv; + + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) + return; + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_RESET_TIMER; + msg.data = NULL; + msg.data_len = 0; + atomic_add(2, &panic_done_count); + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + &panic_halt_heartbeat_smi_msg, + &panic_halt_heartbeat_recv_msg, + 1); + if (rv) + atomic_sub(2, &panic_done_count); +} + +static struct ipmi_smi_msg panic_halt_smi_msg = { + .done = panic_smi_free +}; +static struct ipmi_recv_msg panic_halt_recv_msg = { + .done = panic_recv_free }; -/* Special call, doesn't claim any locks. This is only to be called - at panic or halt time, in run-to-completion mode, when the caller - is the only CPU and the only thing that will be going is these IPMI - calls. */ +/* + * Special call, doesn't claim any locks. This is only to be called + * at panic or halt time, in run-to-completion mode, when the caller + * is the only CPU and the only thing that will be going is these IPMI + * calls. + */ static void panic_halt_ipmi_set_timeout(void) { int send_heartbeat_now; int rv; + /* Wait for the messages to be free. */ + while (atomic_read(&panic_done_count) != 0) + ipmi_poll_interface(watchdog_user); + atomic_add(2, &panic_done_count); rv = i_ipmi_set_timeout(&panic_halt_smi_msg, &panic_halt_recv_msg, &send_heartbeat_now); - if (!rv) { + if (rv) { + atomic_sub(2, &panic_done_count); + printk(KERN_WARNING PFX + "Unable to extend the watchdog timeout."); + } else { if (send_heartbeat_now) panic_halt_ipmi_heartbeat(); } + while (atomic_read(&panic_done_count) != 0) + ipmi_poll_interface(watchdog_user); } -/* We use a semaphore to make sure that only one thing can send a - heartbeat at one time, because we only have one copy of the data. - The semaphore is claimed when the set_timeout is sent and freed - when both messages are free. */ +/* + * We use a mutex to make sure that only one thing can send a + * heartbeat at one time, because we only have one copy of the data. + * The semaphore is claimed when the set_timeout is sent and freed + * when both messages are free. + */ static atomic_t heartbeat_tofree = ATOMIC_INIT(0); static DEFINE_MUTEX(heartbeat_lock); static DECLARE_COMPLETION(heartbeat_wait); @@ -496,53 +578,46 @@ static void heartbeat_free_recv(struct ipmi_recv_msg *msg) if (atomic_dec_and_test(&heartbeat_tofree)) complete(&heartbeat_wait); } -static struct ipmi_smi_msg heartbeat_smi_msg = -{ +static struct ipmi_smi_msg heartbeat_smi_msg = { .done = heartbeat_free_smi }; -static struct ipmi_recv_msg heartbeat_recv_msg = -{ +static struct ipmi_recv_msg heartbeat_recv_msg = { .done = heartbeat_free_recv }; - -static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = -{ - .done = dummy_smi_free -}; -static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = -{ - .done = dummy_recv_free -}; - + static int ipmi_heartbeat(void) { struct kernel_ipmi_msg msg; int rv; struct ipmi_system_interface_addr addr; + int timeout_retries = 0; - if (ipmi_ignore_heartbeat) { + if (ipmi_ignore_heartbeat) return 0; - } if (ipmi_start_timer_on_heartbeat) { ipmi_start_timer_on_heartbeat = 0; ipmi_watchdog_state = action_val; return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); } else if (pretimeout_since_last_heartbeat) { - /* A pretimeout occurred, make sure we set the timeout. - We don't want to set the action, though, we want to - leave that alone (thus it can't be combined with the - above operation. */ - pretimeout_since_last_heartbeat = 0; + /* + * A pretimeout occurred, make sure we set the timeout. + * We don't want to set the action, though, we want to + * leave that alone (thus it can't be combined with the + * above operation. + */ return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); } mutex_lock(&heartbeat_lock); +restart: atomic_set(&heartbeat_tofree, 2); - /* Don't reset the timer if we have the timer turned off, that - re-enables the watchdog. */ + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) { mutex_unlock(&heartbeat_lock); return 0; @@ -574,62 +649,61 @@ static int ipmi_heartbeat(void) /* Wait for the heartbeat to be sent. */ wait_for_completion(&heartbeat_wait); - if (heartbeat_recv_msg.msg.data[0] != 0) { - /* Got an error in the heartbeat response. It was already - reported in ipmi_wdog_msg_handler, but we should return - an error here. */ - rv = -EINVAL; + if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) { + timeout_retries++; + if (timeout_retries > 3) { + printk(KERN_ERR PFX ": Unable to restore the IPMI" + " watchdog's settings, giving up.\n"); + rv = -EIO; + goto out_unlock; + } + + /* + * The timer was not initialized, that means the BMC was + * probably reset and lost the watchdog information. Attempt + * to restore the timer's info. Note that we still hold + * the heartbeat lock, to keep a heartbeat from happening + * in this process, so must say no heartbeat to avoid a + * deadlock on this mutex. + */ + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + if (rv) { + printk(KERN_ERR PFX ": Unable to send the command to" + " set the watchdog's settings, giving up.\n"); + goto out_unlock; + } + + /* We might need a new heartbeat, so do it now */ + goto restart; + } else if (heartbeat_recv_msg.msg.data[0] != 0) { + /* + * Got an error in the heartbeat response. It was already + * reported in ipmi_wdog_msg_handler, but we should return + * an error here. + */ + rv = -EINVAL; } +out_unlock: mutex_unlock(&heartbeat_lock); return rv; } -static void panic_halt_ipmi_heartbeat(void) -{ - struct kernel_ipmi_msg msg; - struct ipmi_system_interface_addr addr; - - - /* Don't reset the timer if we have the timer turned off, that - re-enables the watchdog. */ - if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) - return; - - addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - addr.channel = IPMI_BMC_CHANNEL; - addr.lun = 0; - - msg.netfn = 0x06; - msg.cmd = IPMI_WDOG_RESET_TIMER; - msg.data = NULL; - msg.data_len = 0; - ipmi_request_supply_msgs(watchdog_user, - (struct ipmi_addr *) &addr, - 0, - &msg, - NULL, - &panic_halt_heartbeat_smi_msg, - &panic_halt_heartbeat_recv_msg, - 1); -} - -static struct watchdog_info ident = -{ +static struct watchdog_info ident = { .options = 0, /* WDIOF_SETTIMEOUT, */ .firmware_version = 1, .identity = "IPMI" }; -static int ipmi_ioctl(struct inode *inode, struct file *file, +static int ipmi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int i; int val; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: i = copy_to_user(argp, &ident, sizeof(ident)); return i ? -EFAULT : 0; @@ -647,14 +721,14 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, return -EFAULT; return 0; - case WDIOC_SET_PRETIMEOUT: + case WDIOC_SETPRETIMEOUT: i = copy_from_user(&val, argp, sizeof(int)); if (i) return -EFAULT; pretimeout = val; return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); - case WDIOC_GET_PRETIMEOUT: + case WDIOC_GETPRETIMEOUT: i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); if (i) return -EFAULT; @@ -667,15 +741,13 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, i = copy_from_user(&val, argp, sizeof(int)); if (i) return -EFAULT; - if (val & WDIOS_DISABLECARD) - { + if (val & WDIOS_DISABLECARD) { ipmi_watchdog_state = WDOG_TIMEOUT_NONE; ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); ipmi_start_timer_on_heartbeat = 0; } - if (val & WDIOS_ENABLECARD) - { + if (val & WDIOS_ENABLECARD) { ipmi_watchdog_state = action_val; ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); } @@ -693,6 +765,19 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, } } +static long ipmi_unlocked_ioctl(struct file *file, + unsigned int cmd, + unsigned long arg) +{ + int ret; + + mutex_lock(&ipmi_watchdog_mutex); + ret = ipmi_ioctl(file, cmd, arg); + mutex_unlock(&ipmi_watchdog_mutex); + + return ret; +} + static ssize_t ipmi_write(struct file *file, const char __user *buf, size_t len, @@ -701,13 +786,13 @@ static ssize_t ipmi_write(struct file *file, int rv; if (len) { - if (!nowayout) { - size_t i; + if (!nowayout) { + size_t i; /* In case it was set long ago */ expect_close = 0; - for (i = 0; i != len; i++) { + for (i = 0; i != len; i++) { char c; if (get_user(c, buf + i)) @@ -719,9 +804,8 @@ static ssize_t ipmi_write(struct file *file, rv = ipmi_heartbeat(); if (rv) return rv; - return 1; } - return 0; + return len; } static ssize_t ipmi_read(struct file *file, @@ -735,15 +819,17 @@ static ssize_t ipmi_read(struct file *file, if (count <= 0) return 0; - /* Reading returns if the pretimeout has gone off, and it only does - it once per pretimeout. */ + /* + * Reading returns if the pretimeout has gone off, and it only does + * it once per pretimeout. + */ spin_lock(&ipmi_read_lock); if (!data_to_read) { if (file->f_flags & O_NONBLOCK) { rv = -EAGAIN; goto out; } - + init_waitqueue_entry(&wait, current); add_wait_queue(&read_q, &wait); while (!data_to_read) { @@ -753,7 +839,7 @@ static ssize_t ipmi_read(struct file *file, spin_lock(&ipmi_read_lock); } remove_wait_queue(&read_q, &wait); - + if (signal_pending(current)) { rv = -ERESTARTSYS; goto out; @@ -776,25 +862,28 @@ static ssize_t ipmi_read(struct file *file, static int ipmi_open(struct inode *ino, struct file *filep) { - switch (iminor(ino)) { - case WATCHDOG_MINOR: + switch (iminor(ino)) { + case WATCHDOG_MINOR: if (test_and_set_bit(0, &ipmi_wdog_open)) - return -EBUSY; + return -EBUSY; + - /* Don't start the timer now, let it start on the - first heartbeat. */ + /* + * Don't start the timer now, let it start on the + * first heartbeat. + */ ipmi_start_timer_on_heartbeat = 1; return nonseekable_open(ino, filep); default: return (-ENODEV); - } + } } static unsigned int ipmi_poll(struct file *file, poll_table *wait) { unsigned int mask = 0; - + poll_wait(file, &read_q, wait); spin_lock(&ipmi_read_lock); @@ -828,7 +917,6 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync (-1, filep, 0); expect_close = 0; return 0; @@ -839,10 +927,11 @@ static const struct file_operations ipmi_wdog_fops = { .read = ipmi_read, .poll = ipmi_poll, .write = ipmi_write, - .ioctl = ipmi_ioctl, + .unlocked_ioctl = ipmi_unlocked_ioctl, .open = ipmi_open, .release = ipmi_close, .fasync = ipmi_fasync, + .llseek = no_llseek, }; static struct miscdevice ipmi_wdog_miscdev = { @@ -854,12 +943,16 @@ static struct miscdevice ipmi_wdog_miscdev = { static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, void *handler_data) { - if (msg->msg.data[0] != 0) { + if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER && + msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) + printk(KERN_INFO PFX "response: The IPMI controller appears" + " to have been reset, will attempt to reinitialize" + " the watchdog timer\n"); + else if (msg->msg.data[0] != 0) printk(KERN_ERR PFX "response: Error %x on cmd %x\n", msg->msg.data[0], msg->msg.cmd); - } - + ipmi_free_recv_msg(msg); } @@ -879,14 +972,14 @@ static void ipmi_wdog_pretimeout_handler(void *handler_data) } } - /* On some machines, the heartbeat will give - an error and not work unless we re-enable - the timer. So do so. */ + /* + * On some machines, the heartbeat will give an error and not + * work unless we re-enable the timer. So do so. + */ pretimeout_since_last_heartbeat = 1; } -static struct ipmi_user_hndl ipmi_hndlrs = -{ +static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = ipmi_wdog_msg_handler, .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler }; @@ -895,7 +988,6 @@ static void ipmi_register_watchdog(int ipmi_intf) { int rv = -EBUSY; - down_write(®ister_sem); if (watchdog_user) goto out; @@ -921,15 +1013,58 @@ static void ipmi_register_watchdog(int ipmi_intf) printk(KERN_CRIT PFX "Unable to register misc device\n"); } - out: - up_write(®ister_sem); +#ifdef HAVE_DIE_NMI + if (nmi_handler_registered) { + int old_pretimeout = pretimeout; + int old_timeout = timeout; + int old_preop_val = preop_val; + + /* + * Set the pretimeout to go off in a second and give + * ourselves plenty of time to stop the timer. + */ + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */ + pretimeout = 99; + timeout = 100; + + testing_nmi = 1; + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + if (rv) { + printk(KERN_WARNING PFX "Error starting timer to" + " test NMI: 0x%x. The NMI pretimeout will" + " likely not work\n", rv); + rv = 0; + goto out_restore; + } + + msleep(1500); + + if (testing_nmi != 2) { + printk(KERN_WARNING PFX "IPMI NMI didn't seem to" + " occur. The NMI pretimeout will" + " likely not work\n"); + } + out_restore: + testing_nmi = 0; + preop_val = old_preop_val; + pretimeout = old_pretimeout; + timeout = old_timeout; + } +#endif + + out: if ((start_now) && (rv == 0)) { /* Run from startup, so start the timer now. */ start_now = 0; /* Disable this function after first startup. */ ipmi_watchdog_state = action_val; ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); printk(KERN_INFO PFX "Starting now!\n"); + } else { + /* Stop the timer now. */ + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } } @@ -937,8 +1072,6 @@ static void ipmi_unregister_watchdog(int ipmi_intf) { int rv; - down_write(®ister_sem); - if (!watchdog_user) goto out; @@ -948,9 +1081,11 @@ static void ipmi_unregister_watchdog(int ipmi_intf) /* Make sure no one can call us any more. */ misc_deregister(&ipmi_wdog_miscdev); - /* Wait to make sure the message makes it out. The lower layer has - pointers to our buffers, we want to make sure they are done before - we release our memory. */ + /* + * Wait to make sure the message makes it out. The lower layer has + * pointers to our buffers, we want to make sure they are done before + * we release our memory. + */ while (atomic_read(&set_timeout_tofree)) schedule_timeout_uninterruptible(1); @@ -963,20 +1098,37 @@ static void ipmi_unregister_watchdog(int ipmi_intf) watchdog_user = NULL; out: - up_write(®ister_sem); + return; } -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI static int -ipmi_nmi(void *dev_id, int cpu, int handled) +ipmi_nmi(unsigned int val, struct pt_regs *regs) { - /* If we are not expecting a timeout, ignore it. */ + /* + * If we get here, it's an NMI that's not a memory or I/O + * error. We can't truly tell if it's from IPMI or not + * without sending a message, and sending a message is almost + * impossible because of locking. + */ + + if (testing_nmi) { + testing_nmi = 2; + return NMI_HANDLED; + } + + /* If we are not expecting a timeout, ignore it. */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) - return NOTIFY_DONE; + return NMI_DONE; - /* If no one else handled the NMI, we assume it was the IPMI - watchdog. */ - if ((!handled) && (preop_val == WDOG_PREOP_PANIC)) { + if (preaction_val != WDOG_PRETIMEOUT_NMI) + return NMI_DONE; + + /* + * If no one else handled the NMI, we assume it was the IPMI + * watchdog. + */ + if (preop_val == WDOG_PREOP_PANIC) { /* On some machines, the heartbeat will give an error and not work unless we re-enable the timer. So do so. */ @@ -985,34 +1137,24 @@ ipmi_nmi(void *dev_id, int cpu, int handled) panic(PFX "pre-timeout"); } - return NOTIFY_DONE; + return NMI_HANDLED; } - -static struct nmi_handler ipmi_nmi_handler = -{ - .link = LIST_HEAD_INIT(ipmi_nmi_handler.link), - .dev_name = "ipmi_watchdog", - .dev_id = NULL, - .handler = ipmi_nmi, - .priority = 0, /* Call us last. */ -}; -int nmi_handler_registered; #endif static int wdog_reboot_handler(struct notifier_block *this, unsigned long code, void *unused) { - static int reboot_event_handled = 0; + static int reboot_event_handled; if ((watchdog_user) && (!reboot_event_handled)) { /* Make sure we only do this once. */ reboot_event_handled = 1; - if (code == SYS_DOWN || code == SYS_HALT) { + if (code == SYS_POWER_OFF || code == SYS_HALT) { /* Disable the WDT if we are shutting down. */ ipmi_watchdog_state = WDOG_TIMEOUT_NONE; - panic_halt_ipmi_set_timeout(); + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { /* Set a long timer to let the reboot happens, but reboot if it hangs, but only if the watchdog @@ -1020,7 +1162,7 @@ static int wdog_reboot_handler(struct notifier_block *this, timeout = 120; pretimeout = 0; ipmi_watchdog_state = WDOG_TIMEOUT_RESET; - panic_halt_ipmi_set_timeout(); + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } } return NOTIFY_OK; @@ -1036,7 +1178,7 @@ static int wdog_panic_handler(struct notifier_block *this, unsigned long event, void *unused) { - static int panic_event_handled = 0; + static int panic_event_handled; /* On a panic, if we have a panic timeout, make sure to extend the watchdog timer to a reasonable value to complete the @@ -1046,7 +1188,7 @@ static int wdog_panic_handler(struct notifier_block *this, ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { /* Make sure we do this only once. */ panic_event_handled = 1; - + timeout = 255; pretimeout = 0; panic_halt_ipmi_set_timeout(); @@ -1072,8 +1214,7 @@ static void ipmi_smi_gone(int if_num) ipmi_unregister_watchdog(if_num); } -static struct ipmi_smi_watcher smi_watcher = -{ +static struct ipmi_smi_watcher smi_watcher = { .owner = THIS_MODULE, .new_smi = ipmi_new_smi, .smi_gone = ipmi_smi_gone @@ -1113,7 +1254,7 @@ static int preaction_op(const char *inval, char *outval) preaction_val = WDOG_PRETIMEOUT_NONE; else if (strcmp(inval, "pre_smi") == 0) preaction_val = WDOG_PRETIMEOUT_SMI; -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI else if (strcmp(inval, "pre_nmi") == 0) preaction_val = WDOG_PRETIMEOUT_NMI; #endif @@ -1147,7 +1288,7 @@ static int preop_op(const char *inval, char *outval) static void check_parms(void) { -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI int do_nmi = 0; int rv; @@ -1160,20 +1301,10 @@ static void check_parms(void) preop_op("preop_none", NULL); do_nmi = 0; } -#ifdef CONFIG_X86_LOCAL_APIC - if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING PFX "nmi_watchdog is set to IO APIC" - " mode (value is %d), that is incompatible" - " with using NMI in the IPMI watchdog." - " Disabling IPMI nmi pretimeout.\n", - nmi_watchdog); - preaction_val = WDOG_PRETIMEOUT_NONE; - do_nmi = 0; - } -#endif } if (do_nmi && !nmi_handler_registered) { - rv = request_nmi(&ipmi_nmi_handler); + rv = register_nmi_handler(NMI_UNKNOWN, ipmi_nmi, 0, + "ipmi"); if (rv) { printk(KERN_WARNING PFX "Can't register nmi handler\n"); @@ -1181,7 +1312,7 @@ static void check_parms(void) } else nmi_handler_registered = 1; } else if (!do_nmi && nmi_handler_registered) { - release_nmi(&ipmi_nmi_handler); + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); nmi_handler_registered = 0; } #endif @@ -1217,9 +1348,9 @@ static int __init ipmi_wdog_init(void) rv = ipmi_smi_watcher_register(&smi_watcher); if (rv) { -#ifdef HAVE_NMI_HANDLER - if (preaction_val == WDOG_PRETIMEOUT_NMI) - release_nmi(&ipmi_nmi_handler); +#ifdef HAVE_DIE_NMI + if (nmi_handler_registered) + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); #endif atomic_notifier_chain_unregister(&panic_notifier_list, &wdog_panic_notifier); @@ -1238,9 +1369,9 @@ static void __exit ipmi_wdog_exit(void) ipmi_smi_watcher_unregister(&smi_watcher); ipmi_unregister_watchdog(watchdog_ifnum); -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI if (nmi_handler_registered) - release_nmi(&ipmi_nmi_handler); + unregister_nmi_handler(NMI_UNKNOWN, "ipmi"); #endif atomic_notifier_chain_unregister(&panic_notifier_list, |