diff options
Diffstat (limited to 'drivers/bluetooth/btusb.c')
| -rw-r--r-- | drivers/bluetooth/btusb.c | 787 |
1 files changed, 702 insertions, 85 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f00f596c102..6250fc2fb93 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -21,16 +21,9 @@ * */ -#include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/skbuff.h> - #include <linux/usb.h> +#include <linux/firmware.h> #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> @@ -55,13 +48,21 @@ static struct usb_driver btusb_driver; #define BTUSB_BROKEN_ISOC 0x20 #define BTUSB_WRONG_SCO_MTU 0x40 #define BTUSB_ATH3012 0x80 +#define BTUSB_INTEL 0x100 +#define BTUSB_BCM_PATCHRAM 0x200 -static struct usb_device_id btusb_table[] = { +static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + /* Apple-specific (Broadcom) devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) }, + + /* MediaTek MT76x0E */ + { USB_DEVICE(0x0e8d, 0x763f) }, + /* Broadcom SoftSailing reporting vendor specific */ - { USB_DEVICE(0x05ac, 0x21e1) }, + { USB_DEVICE(0x0a5c, 0x21e1) }, /* Apple MacBookPro 7,1 */ { USB_DEVICE(0x05ac, 0x8213) }, @@ -101,15 +102,31 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ - { USB_DEVICE(0x0a5c, 0x21e3) }, + { USB_DEVICE(0x0489, 0xe042) }, + { USB_DEVICE(0x04ca, 0x2003) }, + { USB_DEVICE(0x0b05, 0x17b5) }, + { USB_DEVICE(0x0b05, 0x17cb) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Foxconn - Hon Hai */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) }, + + /* Broadcom devices with vendor specific id */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Belkin F8065bf - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, + + /* IMC Networks - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) }, + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, btusb_table); -static struct usb_device_id blacklist_table[] = { +static const struct usb_device_id blacklist_table[] = { /* CSR BlueCore devices */ { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, @@ -117,23 +134,59 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, /* Atheros 3011 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, - { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, /* Atheros 3012 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + /* Broadcom BCM2035 */ - { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, - { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, + { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Broadcom BCM2045 */ { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, @@ -180,6 +233,10 @@ static struct usb_device_id blacklist_table[] = { /* Frontline ComProbe Bluetooth Sniffer */ { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, + /* Intel Bluetooth device */ + { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, + { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL }, + { } /* Terminating entry */ }; @@ -242,7 +299,7 @@ static int inc_tx(struct btusb_data *data) static void btusb_intr_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, @@ -281,7 +338,7 @@ static void btusb_intr_complete(struct urb *urb) static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; @@ -330,7 +387,7 @@ static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) static void btusb_bulk_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, @@ -369,7 +426,7 @@ static void btusb_bulk_complete(struct urb *urb) static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; @@ -416,7 +473,7 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) static void btusb_isoc_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); int i, err; BT_DBG("%s urb %p status %d count %d", hdev->name, @@ -483,7 +540,7 @@ static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; @@ -536,7 +593,7 @@ static void btusb_tx_complete(struct urb *urb) { struct sk_buff *skb = urb->context; struct hci_dev *hdev = (struct hci_dev *) skb->dev; - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); @@ -583,7 +640,7 @@ done: static int btusb_open(struct hci_dev *hdev) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); @@ -633,7 +690,7 @@ static void btusb_stop_traffic(struct btusb_data *data) static int btusb_close(struct hci_dev *hdev) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); @@ -663,7 +720,7 @@ failed: static int btusb_flush(struct hci_dev *hdev) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s", hdev->name); @@ -672,10 +729,9 @@ static int btusb_flush(struct hci_dev *hdev) return 0; } -static int btusb_send_frame(struct sk_buff *skb) +static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { - struct hci_dev *hdev = (struct hci_dev *) skb->dev; - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); struct usb_ctrlrequest *dr; struct urb *urb; unsigned int pipe; @@ -686,6 +742,8 @@ static int btusb_send_frame(struct sk_buff *skb) if (!test_bit(HCI_RUNNING, &hdev->flags)) return -EBUSY; + skb->dev = (void *) hdev; + switch (bt_cb(skb)->pkt_type) { case HCI_COMMAND_PKT: urb = usb_alloc_urb(0, GFP_ATOMIC); @@ -726,14 +784,11 @@ static int btusb_send_frame(struct sk_buff *skb) usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_tx_complete, skb); - if (skb->priority >= HCI_PRIO_MAX - 1) - urb->transfer_flags = URB_ISO_ASAP; - hdev->stat.acl_tx++; break; case HCI_SCODATA_PKT: - if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1) + if (!data->isoc_tx_ep || hci_conn_num(hdev, SCO_LINK) < 1) return -ENODEV; urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC); @@ -786,30 +841,21 @@ done: return err; } -static void btusb_destruct(struct hci_dev *hdev) -{ - struct btusb_data *data = hdev->driver_data; - - BT_DBG("%s", hdev->name); - - kfree(data); -} - static void btusb_notify(struct hci_dev *hdev, unsigned int evt) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s evt %d", hdev->name, evt); - if (hdev->conn_hash.sco_num != data->sco_num) { - data->sco_num = hdev->conn_hash.sco_num; + if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { + data->sco_num = hci_conn_num(hdev, SCO_LINK); schedule_work(&data->work); } } static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) { - struct btusb_data *data = hdev->driver_data; + struct btusb_data *data = hci_get_drvdata(hdev); struct usb_interface *intf = data->isoc; struct usb_endpoint_descriptor *ep_desc; int i, err; @@ -854,9 +900,10 @@ static void btusb_work(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, work); struct hci_dev *hdev = data->hdev; + int new_alts; int err; - if (hdev->conn_hash.sco_num > 0) { + if (data->sco_num > 0) { if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); if (err < 0) { @@ -867,11 +914,19 @@ static void btusb_work(struct work_struct *work) set_bit(BTUSB_DID_ISO_RESUME, &data->flags); } - if (data->isoc_altsetting != 2) { + + if (hdev->voice_setting & 0x0020) { + static const int alts[3] = { 2, 4, 5 }; + new_alts = alts[data->sco_num - 1]; + } else { + new_alts = data->sco_num; + } + + if (data->isoc_altsetting != new_alts) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); - if (__set_isoc_interface(hdev, 2) < 0) + if (__set_isoc_interface(hdev, new_alts) < 0) return; } @@ -903,6 +958,578 @@ static void btusb_waker(struct work_struct *work) usb_autopm_put_interface(data->intf); } +static int btusb_setup_bcm92035(struct hci_dev *hdev) +{ + struct sk_buff *skb; + u8 val = 0x00; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb)); + else + kfree_skb(skb); + + return 0; +} + +static int btusb_setup_csr(struct hci_dev *hdev) +{ + struct hci_rp_read_local_version *rp; + struct sk_buff *skb; + int ret; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb)); + return -PTR_ERR(skb); + } + + rp = (struct hci_rp_read_local_version *) skb->data; + + if (!rp->status) { + if (le16_to_cpu(rp->manufacturer) != 10) { + /* Clear the reset quirk since this is not an actual + * early Bluetooth 1.1 device from CSR. + */ + clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + /* These fake CSR controllers have all a broken + * stored link key handling and so just disable it. + */ + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, + &hdev->quirks); + } + } + + ret = -bt_to_errno(rp->status); + + kfree_skb(skb); + + return ret; +} + +struct intel_version { + u8 status; + u8 hw_platform; + u8 hw_variant; + u8 hw_revision; + u8 fw_variant; + u8 fw_revision; + u8 fw_build_num; + u8 fw_build_ww; + u8 fw_build_yy; + u8 fw_patch_num; +} __packed; + +static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + char fwname[64]; + int ret; + + snprintf(fwname, sizeof(fwname), + "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", + ver->hw_platform, ver->hw_variant, ver->hw_revision, + ver->fw_variant, ver->fw_revision, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy); + + ret = request_firmware(&fw, fwname, &hdev->dev); + if (ret < 0) { + if (ret == -EINVAL) { + BT_ERR("%s Intel firmware file request failed (%d)", + hdev->name, ret); + return NULL; + } + + BT_ERR("%s failed to open Intel firmware file: %s(%d)", + hdev->name, fwname, ret); + + /* If the correct firmware patch file is not found, use the + * default firmware patch file instead + */ + snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq", + ver->hw_platform, ver->hw_variant); + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { + BT_ERR("%s failed to open default Intel fw file: %s", + hdev->name, fwname); + return NULL; + } + } + + BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname); + + return fw; +} + +static int btusb_setup_intel_patching(struct hci_dev *hdev, + const struct firmware *fw, + const u8 **fw_ptr, int *disable_patch) +{ + struct sk_buff *skb; + struct hci_command_hdr *cmd; + const u8 *cmd_param; + struct hci_event_hdr *evt = NULL; + const u8 *evt_param = NULL; + int remain = fw->size - (*fw_ptr - fw->data); + + /* The first byte indicates the types of the patch command or event. + * 0x01 means HCI command and 0x02 is HCI event. If the first bytes + * in the current firmware buffer doesn't start with 0x01 or + * the size of remain buffer is smaller than HCI command header, + * the firmware file is corrupted and it should stop the patching + * process. + */ + if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { + BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name); + return -EINVAL; + } + (*fw_ptr)++; + remain--; + + cmd = (struct hci_command_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*cmd); + remain -= sizeof(*cmd); + + /* Ensure that the remain firmware data is long enough than the length + * of command parameter. If not, the firmware file is corrupted. + */ + if (remain < cmd->plen) { + BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name); + return -EFAULT; + } + + /* If there is a command that loads a patch in the firmware + * file, then enable the patch upon success, otherwise just + * disable the manufacturer mode, for example patch activation + * is not required when the default firmware patch file is used + * because there are no patch data to load. + */ + if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) + *disable_patch = 0; + + cmd_param = *fw_ptr; + *fw_ptr += cmd->plen; + remain -= cmd->plen; + + /* This reads the expected events when the above command is sent to the + * device. Some vendor commands expects more than one events, for + * example command status event followed by vendor specific event. + * For this case, it only keeps the last expected event. so the command + * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of + * last expected event. + */ + while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { + (*fw_ptr)++; + remain--; + + evt = (struct hci_event_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*evt); + remain -= sizeof(*evt); + + if (remain < evt->plen) { + BT_ERR("%s Intel fw corrupted: invalid evt len", + hdev->name); + return -EFAULT; + } + + evt_param = *fw_ptr; + *fw_ptr += evt->plen; + remain -= evt->plen; + } + + /* Every HCI commands in the firmware file has its correspond event. + * If event is not found or remain is smaller than zero, the firmware + * file is corrupted. + */ + if (!evt || !evt_param || remain < 0) { + BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name); + return -EFAULT; + } + + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, + cmd_param, evt->evt, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", + hdev->name, cmd->opcode, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* It ensures that the returned event matches the event data read from + * the firmware file. At fist, it checks the length and then + * the contents of the event. + */ + if (skb->len != evt->plen) { + BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name, + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + + if (memcmp(skb->data, evt_param, evt->plen)) { + BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)", + hdev->name, le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_setup_intel(struct hci_dev *hdev) +{ + struct sk_buff *skb; + const struct firmware *fw; + const u8 *fw_ptr; + int disable_patch; + struct intel_version *ver; + + const u8 mfg_enable[] = { 0x01, 0x00 }; + const u8 mfg_disable[] = { 0x00, 0x00 }; + const u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; + const u8 mfg_reset_activate[] = { 0x00, 0x02 }; + + BT_DBG("%s", hdev->name); + + /* The controller has a bug with the first HCI command sent to it + * returning number of completed commands as zero. This would stall the + * command processing in the Bluetooth core. + * + * As a workaround, send HCI Reset command first which will reset the + * number of completed commands and allow normal command processing + * from now on. + */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending initial HCI reset command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + /* Read Intel specific controller version first to allow selection of + * which firmware file to load. + * + * The returned information are hardware variant and revision plus + * firmware variant, revision and build number. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s reading Intel fw version command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s Intel version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + ver = (struct intel_version *)skb->data; + if (ver->status) { + BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, + ver->status); + kfree_skb(skb); + return -bt_to_errno(ver->status); + } + + BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", + hdev->name, ver->hw_platform, ver->hw_variant, + ver->hw_revision, ver->fw_variant, ver->fw_revision, + ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy, + ver->fw_patch_num); + + /* fw_patch_num indicates the version of patch the device currently + * have. If there is no patch data in the device, it is always 0x00. + * So, if it is other than 0x00, no need to patch the deivce again. + */ + if (ver->fw_patch_num) { + BT_INFO("%s: Intel device is already patched. patch num: %02x", + hdev->name, ver->fw_patch_num); + kfree_skb(skb); + return 0; + } + + /* Opens the firmware patch file based on the firmware version read + * from the controller. If it fails to open the matching firmware + * patch file, it tries to open the default firmware patch file. + * If no patch file is found, allow the device to operate without + * a patch. + */ + fw = btusb_setup_intel_get_fw(hdev, ver); + if (!fw) { + kfree_skb(skb); + return 0; + } + fw_ptr = fw->data; + + /* This Intel specific command enables the manufacturer mode of the + * controller. + * + * Only while this mode is enabled, the driver can download the + * firmware patch data and configuration parameters. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s entering Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + release_firmware(fw); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + u8 evt_status = skb->data[0]; + BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", + hdev->name, evt_status); + kfree_skb(skb); + release_firmware(fw); + return -bt_to_errno(evt_status); + } + kfree_skb(skb); + + disable_patch = 1; + + /* The firmware data file consists of list of Intel specific HCI + * commands and its expected events. The first byte indicates the + * type of the message, either HCI command or HCI event. + * + * It reads the command and its expected event from the firmware file, + * and send to the controller. Once __hci_cmd_sync_ev() returns, + * the returned event is compared with the event read from the firmware + * file and it will continue until all the messages are downloaded to + * the controller. + * + * Once the firmware patching is completed successfully, + * the manufacturer mode is disabled with reset and activating the + * downloaded patch. + * + * If the firmware patching fails, the manufacturer mode is + * disabled with reset and deactivating the patch. + * + * If the default patch file is used, no reset is done when disabling + * the manufacturer. + */ + while (fw->size > fw_ptr - fw->data) { + int ret; + + ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr, + &disable_patch); + if (ret < 0) + goto exit_mfg_deactivate; + } + + release_firmware(fw); + + if (disable_patch) + goto exit_mfg_disable; + + /* Patching completed successfully and disable the manufacturer mode + * with reset and activate the downloaded firmware patches. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate), + mfg_reset_activate, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed and activated", + hdev->name); + + return 0; + +exit_mfg_disable: + /* Disable the manufacturer mode without reset */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name); + return 0; + +exit_mfg_deactivate: + release_firmware(fw); + + /* Patching failed. Disable the manufacturer mode with reset and + * deactivate the downloaded firmware patches. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate), + mfg_reset_deactivate, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated", + hdev->name); + + return 0; +} + +static int btusb_setup_bcm_patchram(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_device *udev = data->udev; + char fw_name[64]; + const struct firmware *fw; + const u8 *fw_ptr; + size_t fw_size; + const struct hci_command_hdr *cmd; + const u8 *cmd_param; + u16 opcode; + struct sk_buff *skb; + struct hci_rp_read_local_version *ver; + long ret; + + snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd", + udev->product ? udev->product : "BCM", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + ret = request_firmware(&fw, fw_name, &hdev->dev); + if (ret < 0) { + BT_INFO("%s: BCM: patch %s not found", hdev->name, + fw_name); + return 0; + } + + /* Reset */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); + goto done; + } + kfree_skb(skb); + + /* Read Local Version Info */ + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, ret); + goto done; + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto done; + } + + ver = (struct hci_rp_read_local_version *) skb->data; + BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev, + ver->lmp_ver, ver->lmp_subver); + kfree_skb(skb); + + /* Start Download */ + skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: BCM: Download Minidrv command failed (%ld)", + hdev->name, ret); + goto reset_fw; + } + kfree_skb(skb); + + /* 50 msec delay after Download Minidrv completes */ + msleep(50); + + fw_ptr = fw->data; + fw_size = fw->size; + + while (fw_size >= sizeof(*cmd)) { + cmd = (struct hci_command_hdr *) fw_ptr; + fw_ptr += sizeof(*cmd); + fw_size -= sizeof(*cmd); + + if (fw_size < cmd->plen) { + BT_ERR("%s: BCM: patch %s is corrupted", + hdev->name, fw_name); + ret = -EINVAL; + goto reset_fw; + } + + cmd_param = fw_ptr; + fw_ptr += cmd->plen; + fw_size -= cmd->plen; + + opcode = le16_to_cpu(cmd->opcode); + + skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: BCM: patch command %04x failed (%ld)", + hdev->name, opcode, ret); + goto reset_fw; + } + kfree_skb(skb); + } + + /* 250 msec delay after Launch Ram completes */ + msleep(250); + +reset_fw: + /* Reset */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); + goto done; + } + kfree_skb(skb); + + /* Read Local Version Info */ + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, ret); + goto done; + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto done; + } + + ver = (struct hci_rp_read_local_version *) skb->data; + BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev, + ver->lmp_ver, ver->lmp_subver); + kfree_skb(skb); + +done: + release_firmware(fw); + + return ret; +} + static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -945,7 +1572,7 @@ static int btusb_probe(struct usb_interface *intf, return -ENODEV; } - data = kzalloc(sizeof(*data), GFP_KERNEL); + data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -968,10 +1595,8 @@ static int btusb_probe(struct usb_interface *intf, } } - if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) { - kfree(data); + if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) return -ENODEV; - } data->cmdreq_type = USB_TYPE_CLASS; @@ -991,32 +1616,36 @@ static int btusb_probe(struct usb_interface *intf, init_usb_anchor(&data->deferred); hdev = hci_alloc_dev(); - if (!hdev) { - kfree(data); + if (!hdev) return -ENOMEM; - } hdev->bus = HCI_USB; - hdev->driver_data = data; + hci_set_drvdata(hdev, data); data->hdev = hdev; SET_HCIDEV_DEV(hdev, &intf->dev); - hdev->open = btusb_open; - hdev->close = btusb_close; - hdev->flush = btusb_flush; - hdev->send = btusb_send_frame; - hdev->destruct = btusb_destruct; - hdev->notify = btusb_notify; + hdev->open = btusb_open; + hdev->close = btusb_close; + hdev->flush = btusb_flush; + hdev->send = btusb_send_frame; + hdev->notify = btusb_notify; + + if (id->driver_info & BTUSB_BCM92035) + hdev->setup = btusb_setup_bcm92035; + + if (id->driver_info & BTUSB_BCM_PATCHRAM) + hdev->setup = btusb_setup_bcm_patchram; - hdev->owner = THIS_MODULE; + if (id->driver_info & BTUSB_INTEL) + hdev->setup = btusb_setup_intel; /* Interface numbers are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, 1); if (!reset) - set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { if (!disable_scofix) @@ -1028,15 +1657,20 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_DIGIANSWER) { data->cmdreq_type = USB_TYPE_VENDOR; - set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); } if (id->driver_info & BTUSB_CSR) { struct usb_device *udev = data->udev; + u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); /* Old firmware would otherwise execute USB reset */ - if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117) - set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); + if (bcdDevice < 0x117) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + /* Fake CSR devices with broken commands */ + if (bcdDevice <= 0x100) + hdev->setup = btusb_setup_csr; } if (id->driver_info & BTUSB_SNIFFER) { @@ -1049,23 +1683,11 @@ static int btusb_probe(struct usb_interface *intf, data->isoc = NULL; } - if (id->driver_info & BTUSB_BCM92035) { - unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 }; - struct sk_buff *skb; - - skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); - if (skb) { - memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); - skb_queue_tail(&hdev->driver_init, skb); - } - } - if (data->isoc) { err = usb_driver_claim_interface(&btusb_driver, data->isoc, data); if (err < 0) { hci_free_dev(hdev); - kfree(data); return err; } } @@ -1073,7 +1695,6 @@ static int btusb_probe(struct usb_interface *intf, err = hci_register_dev(hdev); if (err < 0) { hci_free_dev(hdev); - kfree(data); return err; } @@ -1093,9 +1714,6 @@ static void btusb_disconnect(struct usb_interface *intf) return; hdev = data->hdev; - - __hci_dev_hold(hdev); - usb_set_intfdata(data->intf, NULL); if (data->isoc) @@ -1108,8 +1726,6 @@ static void btusb_disconnect(struct usb_interface *intf) else if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); - __hci_dev_put(hdev); - hci_free_dev(hdev); } @@ -1224,6 +1840,7 @@ static struct usb_driver btusb_driver = { #endif .id_table = btusb_table, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(btusb_driver); |