diff options
Diffstat (limited to 'drivers/bluetooth/Kconfig')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 104 |
1 files changed, 95 insertions, 9 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index b9fbe6e7f9a..f5ce64e03fd 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -2,7 +2,7 @@ menu "Bluetooth device drivers" depends on BT -config BT_HCIUSB +config BT_HCIBTUSB tristate "HCI USB driver" depends on USB help @@ -11,19 +11,22 @@ config BT_HCIUSB USB interface. Say Y here to compile support for Bluetooth USB devices into the - kernel or say M to compile it as module (hci_usb). + kernel or say M to compile it as module (btusb). -config BT_HCIUSB_SCO - bool "SCO (voice) support" - depends on BT_HCIUSB +config BT_HCIBTSDIO + tristate "HCI SDIO driver" + depends on MMC help - This option enables the SCO support in the HCI USB driver. You need this - to transmit voice data with your Bluetooth USB device. + Bluetooth HCI SDIO driver. + This driver is required if you want to use Bluetooth device with + SDIO interface. - Say Y here to compile support for SCO over HCI USB. + Say Y here to compile support for Bluetooth SDIO devices into the + kernel or say M to compile it as module (btsdio). config BT_HCIUART tristate "HCI UART driver" + depends on TTY help Bluetooth HCI UART driver. This driver is required if you want to use Bluetooth devices with @@ -47,6 +50,7 @@ config BT_HCIUART_H4 config BT_HCIUART_BCSP bool "BCSP protocol support" depends on BT_HCIUART + select BITREVERSE help BCSP (BlueCore Serial Protocol) is serial protocol for communication between Bluetooth device and host. This protocol is required for non @@ -55,6 +59,41 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. +config BT_HCIUART_ATH3K + bool "Atheros AR300x serial support" + depends on BT_HCIUART + help + HCIATH3K (HCI Atheros AR300x) is a serial protocol for + communication between host and Atheros AR300x Bluetooth devices. + This protocol enables AR300x chips to be enabled with + power management support. + Enable this if you have Atheros AR300x serial Bluetooth device. + + Say Y here to compile support for HCI UART ATH3K protocol. + +config BT_HCIUART_LL + bool "HCILL protocol support" + depends on BT_HCIUART + help + HCILL (HCI Low Level) is a serial protocol for communication + between Bluetooth device and host. This protocol is required for + serial Bluetooth devices that are based on Texas Instruments' + BRF chips. + + Say Y here to compile support for HCILL protocol. + +config BT_HCIUART_3WIRE + bool "Three-wire UART (H5) protocol support" + depends on BT_HCIUART + help + The HCI Three-wire UART Transport Layer makes it possible to + user the Bluetooth HCI over a serial port interface. The HCI + Three-wire UART Transport Layer assumes that the UART + communication may have bit errors, overrun errors or burst + errors and thereby making CTS/RTS lines unnecessary. + + Say Y here to compile support for Three-wire UART protocol. + config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB @@ -156,5 +195,52 @@ config BT_HCIVHCI Say Y here to compile support for virtual HCI devices into the kernel or say M to compile it as module (hci_vhci). -endmenu +config BT_MRVL + tristate "Marvell Bluetooth driver support" + help + The core driver to support Marvell Bluetooth devices. + + This driver is required if you want to support + Marvell Bluetooth devices, such as 8688/8787/8797/8897. + Say Y here to compile Marvell Bluetooth driver + into the kernel or say M to compile it as module. + +config BT_MRVL_SDIO + tristate "Marvell BT-over-SDIO driver" + depends on BT_MRVL && MMC + select FW_LOADER + help + The driver for Marvell Bluetooth chipsets with SDIO interface. + + This driver is required if you want to use Marvell Bluetooth + devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897 + chipsets are supported. + + Say Y here to compile support for Marvell BT-over-SDIO driver + into the kernel or say M to compile it as module. + +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +config BT_WILINK + tristate "Texas Instruments WiLink7 driver" + depends on TI_ST + help + This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS + combo devices. This makes use of shared transport line discipline + core driver to communicate with the BT core of the combo chip. + + Say Y here to compile support for Texas Instrument's WiLink7 driver + into the kernel or say M to compile it as module (btwilink). + +endmenu |