diff options
Diffstat (limited to 'drivers/block/paride/comm.c')
| -rw-r--r-- | drivers/block/paride/comm.c | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/drivers/block/paride/comm.c b/drivers/block/paride/comm.c new file mode 100644 index 00000000000..d842956edf7 --- /dev/null +++ b/drivers/block/paride/comm.c @@ -0,0 +1,218 @@ +/* + comm.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + comm.c is a low-level protocol driver for some older models + of the DataStor "Commuter" parallel to IDE adapter. Some of + the parallel port devices marketed by Arista currently + use this adapter. +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto + +*/ + +#define COMM_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads, 8-bit writes + 1 8-bit reads and writes + 2 8-bit EPP mode +*/ + +#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0)) + +#define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4); +#define P2 w2(5);w2(7);w2(7);w2(5);w2(4); + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x08, 0x10 }; + +static int comm_read_regr( PIA *pi, int cont, int regr ) + +{ int l, h, r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(r); P1; w0(0); + w2(6); l = r1(); w0(0x80); h = r1(); w2(4); + return j44(l,h); + + case 1: w0(r+0x20); P1; + w0(0); w2(0x26); h = r0(); w2(4); + return h; + + case 2: + case 3: + case 4: w3(r+0x20); r1(); + w2(0x24); h = r4(); w2(4); + return h; + + } + return -1; +} + +static void comm_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: w0(r); P1; w0(val); P2; + break; + + case 2: + case 3: + case 4: w3(r); r1(); w4(val); + break; + } +} + +static void comm_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); w0(0xff); w2(6); + w2(4); w0(0xaa); w2(6); + w2(4); w0(0x00); w2(6); + w2(4); w0(0x87); w2(6); + w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4); +} + +static void comm_disconnect ( PIA *pi ) + +{ w2(0); w2(0); w2(0); w2(4); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void comm_read_block( PIA *pi, char * buf, int count ) + +{ int i, l, h; + + switch (pi->mode) { + + case 0: w0(0x48); P1; + for(i=0;i<count;i++) { + w0(0); w2(6); l = r1(); + w0(0x80); h = r1(); w2(4); + buf[i] = j44(l,h); + } + break; + + case 1: w0(0x68); P1; w0(0); + for(i=0;i<count;i++) { + w2(0x26); buf[i] = r0(); w2(0x24); + } + w2(4); + break; + + case 2: w3(0x68); r1(); w2(0x24); + for (i=0;i<count;i++) buf[i] = r4(); + w2(4); + break; + + case 3: w3(0x68); r1(); w2(0x24); + for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w(); + w2(4); + break; + + case 4: w3(0x68); r1(); w2(0x24); + for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l(); + w2(4); + break; + + } +} + +/* NB: Watch out for the byte swapped writes ! */ + +static void comm_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w0(0x68); P1; + for (k=0;k<count;k++) { + w2(5); w0(buf[k^1]); w2(7); + } + w2(5); w2(4); + break; + + case 2: w3(0x48); r1(); + for (k=0;k<count;k++) w4(buf[k^1]); + break; + + case 3: w3(0x48); r1(); + for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k)); + break; + + case 4: w3(0x48); r1(); + for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k)); + break; + + + } +} + +static void comm_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"}; + + printk("%s: comm %s, DataStor Commuter at 0x%x, ", + pi->device,COMM_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol comm = { + .owner = THIS_MODULE, + .name = "comm", + .max_mode = 5, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = comm_write_regr, + .read_regr = comm_read_regr, + .write_block = comm_write_block, + .read_block = comm_read_block, + .connect = comm_connect, + .disconnect = comm_disconnect, + .log_adapter = comm_log_adapter, +}; + +static int __init comm_init(void) +{ + return pi_register(&comm)-1; +} + +static void __exit comm_exit(void) +{ + pi_unregister(&comm); +} + +MODULE_LICENSE("GPL"); +module_init(comm_init) +module_exit(comm_exit) |