diff options
Diffstat (limited to 'drivers/block/cciss.c')
| -rw-r--r-- | drivers/block/cciss.c | 6381 |
1 files changed, 4168 insertions, 2213 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 2cd3391ff87..4595c22f33f 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1,30 +1,30 @@ /* - * Disk Array driver for HP SA 5xxx and 6xxx Controllers - * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P. + * Disk Array driver for HP Smart Array controllers. + * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more details. + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA. * * Questions/Comments/Bugfixes to iss_storagedev@hp.com * */ -#include <linux/config.h> /* CONFIG_PROC_FS */ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci-aspm.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/delay.h> @@ -34,29 +34,55 @@ #include <linux/blkpg.h> #include <linux/timer.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/init.h> +#include <linux/jiffies.h> #include <linux/hdreg.h> #include <linux/spinlock.h> #include <linux/compat.h> -#include <linux/blktrace_api.h> +#include <linux/mutex.h> +#include <linux/bitmap.h> +#include <linux/io.h> #include <asm/uaccess.h> -#include <asm/io.h> #include <linux/dma-mapping.h> #include <linux/blkdev.h> #include <linux/genhd.h> #include <linux/completion.h> +#include <scsi/scsi.h> +#include <scsi/sg.h> +#include <scsi/scsi_ioctl.h> +#include <linux/cdrom.h> +#include <linux/scatterlist.h> +#include <linux/kthread.h> #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.10)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10) +#define DRIVER_NAME "HP CISS Driver (v 3.6.26)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10"); -MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); +MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); +MODULE_VERSION("3.6.26"); MODULE_LICENSE("GPL"); +static int cciss_tape_cmds = 6; +module_param(cciss_tape_cmds, int, 0644); +MODULE_PARM_DESC(cciss_tape_cmds, + "number of commands to allocate for tape devices (default: 6)"); +static int cciss_simple_mode; +module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(cciss_simple_mode, + "Use 'simple mode' rather than 'performant mode'"); + +static int cciss_allow_hpsa; +module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(cciss_allow_hpsa, + "Prevent cciss driver from accessing hardware known to be " + " supported by the hpsa driver"); + +static DEFINE_MUTEX(cciss_mutex); +static struct proc_dir_entry *proc_cciss; #include "cciss_cmd.h" #include "cciss.h" @@ -82,7 +108,8 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3233}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, {0,} }; @@ -111,7 +138,10 @@ static struct board_type products[] = { {0x3213103C, "Smart Array E200i", &SA5_access}, {0x3214103C, "Smart Array E200i", &SA5_access}, {0x3215103C, "Smart Array E200i", &SA5_access}, - {0x3233103C, "Smart Array E500", &SA5_access}, + {0x3237103C, "Smart Array E500", &SA5_access}, + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x323D103C, "Smart Array P700m", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -121,8 +151,6 @@ static struct board_type products[] = { /*define how many times we will try a command because of bus resets */ #define MAX_CMD_RETRIES 3 -#define READ_AHEAD 1024 -#define NR_CMDS 384 /* #commands that can be outstanding */ #define MAX_CTLR 32 /* Originally cciss driver only supports 8 major numbers */ @@ -130,58 +158,80 @@ static struct board_type products[] = { static ctlr_info_t *hba[MAX_CTLR]; -static void do_cciss_request(request_queue_t *q); -static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs); -static int cciss_open(struct inode *inode, struct file *filep); -static int cciss_release(struct inode *inode, struct file *filep); -static int cciss_ioctl(struct inode *inode, struct file *filep, +static struct task_struct *cciss_scan_thread; +static DEFINE_MUTEX(scan_mutex); +static LIST_HEAD(scan_q); + +static void do_cciss_request(struct request_queue *q); +static irqreturn_t do_cciss_intx(int irq, void *dev_id); +static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id); +static int cciss_open(struct block_device *bdev, fmode_t mode); +static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode); +static void cciss_release(struct gendisk *disk, fmode_t mode); +static int cciss_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); -static int revalidate_allvol(ctlr_info_t *host); static int cciss_revalidate(struct gendisk *disk); -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk); -static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, - int clear_all); - -static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, - int withirq, unsigned int *total_size, - unsigned int *block_size); -static void cciss_geometry_inquiry(int ctlr, int logvol, int withirq, - unsigned int total_size, - unsigned int block_size, - InquiryData_struct *inq_buff, +static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl); +static int deregister_disk(ctlr_info_t *h, int drv_index, + int clear_all, int via_ioctl); + +static void cciss_read_capacity(ctlr_info_t *h, int logvol, + sector_t *total_size, unsigned int *block_size); +static void cciss_read_capacity_16(ctlr_info_t *h, int logvol, + sector_t *total_size, unsigned int *block_size); +static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol, + sector_t total_size, + unsigned int block_size, InquiryData_struct *inq_buff, drive_info_struct *drv); -static void cciss_getgeometry(int cntl_num); -static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, - __u32); +static void cciss_interrupt_mode(ctlr_info_t *); +static int cciss_enter_simple_mode(struct ctlr_info *h); static void start_io(ctlr_info_t *h); -static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num, unsigned int log_unit, - __u8 page_code, unsigned char *scsi3addr, int cmd_type); -static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num, unsigned int log_unit, - __u8 page_code, int cmd_type); - -static void fail_all_cmds(unsigned long ctlr); +static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size, + __u8 page_code, unsigned char scsi3addr[], + int cmd_type); +static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, + int attempt_retry); +static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c); + +static int add_to_scan_list(struct ctlr_info *h); +static int scan_thread(void *data); +static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c); +static void cciss_hba_release(struct device *dev); +static void cciss_device_release(struct device *dev); +static void cciss_free_gendisk(ctlr_info_t *h, int drv_index); +static void cciss_free_drive_info(ctlr_info_t *h, int drv_index); +static inline u32 next_command(ctlr_info_t *h); +static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, + u32 *cfg_base_addr, u64 *cfg_base_addr_index, + u64 *cfg_offset); +static int cciss_pci_find_memory_BAR(struct pci_dev *pdev, + unsigned long *memory_bar); +static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag); +static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable); + +/* performant mode helper functions */ +static void calc_bucket_map(int *bucket, int num_buckets, int nsgs, + int *bucket_map); +static void cciss_put_controller_into_performant_mode(ctlr_info_t *h); #ifdef CONFIG_PROC_FS -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data); -static void cciss_procinit(int i); +static void cciss_procinit(ctlr_info_t *h); #else -static void cciss_procinit(int i) +static void cciss_procinit(ctlr_info_t *h) { } #endif /* CONFIG_PROC_FS */ #ifdef CONFIG_COMPAT -static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg); +static int cciss_compat_ioctl(struct block_device *, fmode_t, + unsigned, unsigned long); #endif -static struct block_device_operations cciss_fops = { +static const struct block_device_operations cciss_fops = { .owner = THIS_MODULE, - .open = cciss_open, + .open = cciss_unlocked_open, .release = cciss_release, .ioctl = cciss_ioctl, .getgeo = cciss_getgeo, @@ -191,38 +241,136 @@ static struct block_device_operations cciss_fops = { .revalidate_disk = cciss_revalidate, }; +/* set_performant_mode: Modify the tag for cciss performant + * set bit 0 for pull model, bits 3-1 for block fetch + * register number + */ +static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c) +{ + if (likely(h->transMethod & CFGTBL_Trans_Performant)) + c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); +} + /* * Enqueuing and dequeuing functions for cmdlists. */ -static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c) +static inline void addQ(struct list_head *list, CommandList_struct *c) { - if (*Qptr == NULL) { - *Qptr = c; - c->next = c->prev = c; - } else { - c->prev = (*Qptr)->prev; - c->next = (*Qptr); - (*Qptr)->prev->next = c; - (*Qptr)->prev = c; + list_add_tail(&c->list, list); +} + +static inline void removeQ(CommandList_struct *c) +{ + /* + * After kexec/dump some commands might still + * be in flight, which the firmware will try + * to complete. Resetting the firmware doesn't work + * with old fw revisions, so we have to mark + * them off as 'stale' to prevent the driver from + * falling over. + */ + if (WARN_ON(list_empty(&c->list))) { + c->cmd_type = CMD_MSG_STALE; + return; } + + list_del_init(&c->list); } -static inline CommandList_struct *removeQ(CommandList_struct **Qptr, - CommandList_struct *c) +static void enqueue_cmd_and_start_io(ctlr_info_t *h, + CommandList_struct *c) { - if (c && c->next != c) { - if (*Qptr == c) - *Qptr = c->next; - c->prev->next = c->next; - c->next->prev = c->prev; - } else { - *Qptr = NULL; + unsigned long flags; + set_performant_mode(h, c); + spin_lock_irqsave(&h->lock, flags); + addQ(&h->reqQ, c); + h->Qdepth++; + if (h->Qdepth > h->maxQsinceinit) + h->maxQsinceinit = h->Qdepth; + start_io(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list, + int nr_cmds) +{ + int i; + + if (!cmd_sg_list) + return; + for (i = 0; i < nr_cmds; i++) { + kfree(cmd_sg_list[i]); + cmd_sg_list[i] = NULL; } - return c; + kfree(cmd_sg_list); +} + +static SGDescriptor_struct **cciss_allocate_sg_chain_blocks( + ctlr_info_t *h, int chainsize, int nr_cmds) +{ + int j; + SGDescriptor_struct **cmd_sg_list; + + if (chainsize <= 0) + return NULL; + + cmd_sg_list = kmalloc(sizeof(*cmd_sg_list) * nr_cmds, GFP_KERNEL); + if (!cmd_sg_list) + return NULL; + + /* Build up chain blocks for each command */ + for (j = 0; j < nr_cmds; j++) { + /* Need a block of chainsized s/g elements. */ + cmd_sg_list[j] = kmalloc((chainsize * + sizeof(*cmd_sg_list[j])), GFP_KERNEL); + if (!cmd_sg_list[j]) { + dev_err(&h->pdev->dev, "Cannot get memory " + "for s/g chains.\n"); + goto clean; + } + } + return cmd_sg_list; +clean: + cciss_free_sg_chain_blocks(cmd_sg_list, nr_cmds); + return NULL; +} + +static void cciss_unmap_sg_chain_block(ctlr_info_t *h, CommandList_struct *c) +{ + SGDescriptor_struct *chain_sg; + u64bit temp64; + + if (c->Header.SGTotal <= h->max_cmd_sgentries) + return; + + chain_sg = &c->SG[h->max_cmd_sgentries - 1]; + temp64.val32.lower = chain_sg->Addr.lower; + temp64.val32.upper = chain_sg->Addr.upper; + pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE); +} + +static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c, + SGDescriptor_struct *chain_block, int len) +{ + SGDescriptor_struct *chain_sg; + u64bit temp64; + + chain_sg = &c->SG[h->max_cmd_sgentries - 1]; + chain_sg->Ext = CCISS_SG_CHAIN; + chain_sg->Len = len; + temp64.val = pci_map_single(h->pdev, chain_block, len, + PCI_DMA_TODEVICE); + chain_sg->Addr.lower = temp64.val32.lower; + chain_sg->Addr.upper = temp64.val32.upper; } #include "cciss_scsi.c" /* For SCSI tape support */ +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1) + #ifdef CONFIG_PROC_FS /* @@ -230,199 +378,662 @@ static inline CommandList_struct *removeQ(CommandList_struct **Qptr, */ #define ENG_GIG 1000000000 #define ENG_GIG_FACTOR (ENG_GIG/512) -#define RAID_UNKNOWN 6 -static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", - "UNKNOWN" -}; +#define ENGAGE_SCSI "engage scsi" -static struct proc_dir_entry *proc_cciss; +static void cciss_seq_show_header(struct seq_file *seq) +{ + ctlr_info_t *h = seq->private; + + seq_printf(seq, "%s: HP %s Controller\n" + "Board ID: 0x%08lx\n" + "Firmware Version: %c%c%c%c\n" + "IRQ: %d\n" + "Logical drives: %d\n" + "Current Q depth: %d\n" + "Current # commands on controller: %d\n" + "Max Q depth since init: %d\n" + "Max # commands on controller since init: %d\n" + "Max SG entries since init: %d\n", + h->devname, + h->product_name, + (unsigned long)h->board_id, + h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], + h->firm_ver[3], (unsigned int)h->intr[h->intr_mode], + h->num_luns, + h->Qdepth, h->commands_outstanding, + h->maxQsinceinit, h->max_outstanding, h->maxSG); + +#ifdef CONFIG_CISS_SCSI_TAPE + cciss_seq_tape_report(seq, h); +#endif /* CONFIG_CISS_SCSI_TAPE */ +} -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data) +static void *cciss_seq_start(struct seq_file *seq, loff_t *pos) { - off_t pos = 0; - off_t len = 0; - int size, i, ctlr; - ctlr_info_t *h = (ctlr_info_t *) data; - drive_info_struct *drv; + ctlr_info_t *h = seq->private; unsigned long flags; - sector_t vol_sz, vol_sz_frac; - - ctlr = h->ctlr; /* prevent displaying bogus info during configuration * or deconfiguration of a logical volume */ - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); + spin_lock_irqsave(&h->lock, flags); if (h->busy_configuring) { - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - return -EBUSY; + spin_unlock_irqrestore(&h->lock, flags); + return ERR_PTR(-EBUSY); } h->busy_configuring = 1; - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - - size = sprintf(buffer, "%s: HP %s Controller\n" - "Board ID: 0x%08lx\n" - "Firmware Version: %c%c%c%c\n" - "IRQ: %d\n" - "Logical drives: %d\n" - "Current Q depth: %d\n" - "Current # commands on controller: %d\n" - "Max Q depth since init: %d\n" - "Max # commands on controller since init: %d\n" - "Max SG entries since init: %d\n\n", - h->devname, - h->product_name, - (unsigned long)h->board_id, - h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], - h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], - h->num_luns, h->Qdepth, h->commands_outstanding, - h->maxQsinceinit, h->max_outstanding, h->maxSG); - - pos += size; - len += size; - cciss_proc_tape_report(ctlr, buffer, &pos, &len); - for (i = 0; i <= h->highest_lun; i++) { + spin_unlock_irqrestore(&h->lock, flags); - drv = &h->drv[i]; - if (drv->heads == 0) - continue; + if (*pos == 0) + cciss_seq_show_header(seq); - vol_sz = drv->nr_blocks; - vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); - vol_sz_frac *= 100; - sector_div(vol_sz_frac, ENG_GIG_FACTOR); + return pos; +} + +static int cciss_seq_show(struct seq_file *seq, void *v) +{ + sector_t vol_sz, vol_sz_frac; + ctlr_info_t *h = seq->private; + unsigned ctlr = h->ctlr; + loff_t *pos = v; + drive_info_struct *drv = h->drv[*pos]; + + if (*pos > h->highest_lun) + return 0; + + if (drv == NULL) /* it's possible for h->drv[] to have holes. */ + return 0; + + if (drv->heads == 0) + return 0; + + vol_sz = drv->nr_blocks; + vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); + vol_sz_frac *= 100; + sector_div(vol_sz_frac, ENG_GIG_FACTOR); + + if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN) + drv->raid_level = RAID_UNKNOWN; + seq_printf(seq, "cciss/c%dd%d:" + "\t%4u.%02uGB\tRAID %s\n", + ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac, + raid_label[drv->raid_level]); + return 0; +} + +static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ctlr_info_t *h = seq->private; + + if (*pos > h->highest_lun) + return NULL; + *pos += 1; + + return pos; +} + +static void cciss_seq_stop(struct seq_file *seq, void *v) +{ + ctlr_info_t *h = seq->private; + + /* Only reset h->busy_configuring if we succeeded in setting + * it during cciss_seq_start. */ + if (v == ERR_PTR(-EBUSY)) + return; - if (drv->raid_level > 5) - drv->raid_level = RAID_UNKNOWN; - size = sprintf(buffer + len, "cciss/c%dd%d:" - "\t%4u.%02uGB\tRAID %s\n", - ctlr, i, (int)vol_sz, (int)vol_sz_frac, - raid_label[drv->raid_level]); - pos += size; - len += size; - } - - *eof = 1; - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; h->busy_configuring = 0; - return len; } -static int -cciss_proc_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static const struct seq_operations cciss_seq_ops = { + .start = cciss_seq_start, + .show = cciss_seq_show, + .next = cciss_seq_next, + .stop = cciss_seq_stop, +}; + +static int cciss_seq_open(struct inode *inode, struct file *file) { - unsigned char cmd[80]; - int len; -#ifdef CONFIG_CISS_SCSI_TAPE - ctlr_info_t *h = (ctlr_info_t *) data; - int rc; + int ret = seq_open(file, &cciss_seq_ops); + struct seq_file *seq = file->private_data; + + if (!ret) + seq->private = PDE_DATA(inode); + + return ret; +} + +static ssize_t +cciss_proc_write(struct file *file, const char __user *buf, + size_t length, loff_t *ppos) +{ + int err; + char *buffer; + +#ifndef CONFIG_CISS_SCSI_TAPE + return -EINVAL; #endif - if (count > sizeof(cmd) - 1) + if (!buf || length > PAGE_SIZE - 1) return -EINVAL; - if (copy_from_user(cmd, buffer, count)) - return -EFAULT; - cmd[count] = '\0'; - len = strlen(cmd); // above 3 lines ensure safety - if (len && cmd[len - 1] == '\n') - cmd[--len] = '\0'; -# ifdef CONFIG_CISS_SCSI_TAPE - if (strcmp("engage scsi", cmd) == 0) { - rc = cciss_engage_scsi(h->ctlr); - if (rc != 0) - return -rc; - return count; - } + + buffer = (char *)__get_free_page(GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + err = -EFAULT; + if (copy_from_user(buffer, buf, length)) + goto out; + buffer[length] = '\0'; + +#ifdef CONFIG_CISS_SCSI_TAPE + if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) { + struct seq_file *seq = file->private_data; + ctlr_info_t *h = seq->private; + + err = cciss_engage_scsi(h); + if (err == 0) + err = length; + } else +#endif /* CONFIG_CISS_SCSI_TAPE */ + err = -EINVAL; /* might be nice to have "disengage" too, but it's not safely possible. (only 1 module use count, lock issues.) */ -# endif - return -EINVAL; + +out: + free_page((unsigned long)buffer); + return err; } -/* - * Get us a file in /proc/cciss that says something about each controller. - * Create /proc/cciss if it doesn't exist yet. - */ -static void __devinit cciss_procinit(int i) +static const struct file_operations cciss_proc_fops = { + .owner = THIS_MODULE, + .open = cciss_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = cciss_proc_write, +}; + +static void cciss_procinit(ctlr_info_t *h) { struct proc_dir_entry *pde; - if (proc_cciss == NULL) { - proc_cciss = proc_mkdir("cciss", proc_root_driver); - if (!proc_cciss) - return; + if (proc_cciss == NULL) + proc_cciss = proc_mkdir("driver/cciss", NULL); + if (!proc_cciss) + return; + pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP | + S_IROTH, proc_cciss, + &cciss_proc_fops, h); +} +#endif /* CONFIG_PROC_FS */ + +#define MAX_PRODUCT_NAME_LEN 19 + +#define to_hba(n) container_of(n, struct ctlr_info, dev) +#define to_drv(n) container_of(n, drive_info_struct, dev) + +/* List of controllers which cannot be hard reset on kexec with reset_devices */ +static u32 unresettable_controller[] = { + 0x324a103C, /* Smart Array P712m */ + 0x324b103C, /* SmartArray P711m */ + 0x3223103C, /* Smart Array P800 */ + 0x3234103C, /* Smart Array P400 */ + 0x3235103C, /* Smart Array P400i */ + 0x3211103C, /* Smart Array E200i */ + 0x3212103C, /* Smart Array E200 */ + 0x3213103C, /* Smart Array E200i */ + 0x3214103C, /* Smart Array E200i */ + 0x3215103C, /* Smart Array E200i */ + 0x3237103C, /* Smart Array E500 */ + 0x323D103C, /* Smart Array P700m */ + 0x409C0E11, /* Smart Array 6400 */ + 0x409D0E11, /* Smart Array 6400 EM */ +}; + +/* List of controllers which cannot even be soft reset */ +static u32 soft_unresettable_controller[] = { + 0x409C0E11, /* Smart Array 6400 */ + 0x409D0E11, /* Smart Array 6400 EM */ +}; + +static int ctlr_is_hard_resettable(u32 board_id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++) + if (unresettable_controller[i] == board_id) + return 0; + return 1; +} + +static int ctlr_is_soft_resettable(u32 board_id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++) + if (soft_unresettable_controller[i] == board_id) + return 0; + return 1; +} + +static int ctlr_is_resettable(u32 board_id) +{ + return ctlr_is_hard_resettable(board_id) || + ctlr_is_soft_resettable(board_id); +} + +static ssize_t host_show_resettable(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ctlr_info *h = to_hba(dev); + + return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id)); +} +static DEVICE_ATTR(resettable, S_IRUGO, host_show_resettable, NULL); + +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h = to_hba(dev); + + add_to_scan_list(h); + wake_up_process(cciss_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + + return count; +} +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); + +static ssize_t host_show_transport_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ctlr_info *h = to_hba(dev); + + return snprintf(buf, 20, "%s\n", + h->transMethod & CFGTBL_Trans_Performant ? + "performant" : "simple"); +} +static DEVICE_ATTR(transport_mode, S_IRUGO, host_show_transport_mode, NULL); + +static ssize_t dev_show_unique_id(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + __u8 sn[16]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(sn, drv->serial_no, sizeof(sn)); + spin_unlock_irqrestore(&h->lock, flags); + + if (ret) + return ret; + else + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} +static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); + +static ssize_t dev_show_vendor(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char vendor[VENDOR_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(vendor, drv->vendor, VENDOR_LEN + 1); + spin_unlock_irqrestore(&h->lock, flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); +} +static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); + +static ssize_t dev_show_model(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char model[MODEL_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(model, drv->model, MODEL_LEN + 1); + spin_unlock_irqrestore(&h->lock, flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); +} +static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); + +static ssize_t dev_show_rev(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char rev[REV_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(rev, drv->rev, REV_LEN + 1); + spin_unlock_irqrestore(&h->lock, flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); +} +static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); + +static ssize_t cciss_show_lunid(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + unsigned long flags; + unsigned char lunid[8]; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(&h->lock, flags); + return -EBUSY; + } + if (!drv->heads) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENOTTY; + } + memcpy(lunid, drv->LunID, sizeof(lunid)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} +static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); + +static ssize_t cciss_show_raid_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + int raid; + unsigned long flags; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(&h->lock, flags); + return -EBUSY; } + raid = drv->raid_level; + spin_unlock_irqrestore(&h->lock, flags); + if (raid < 0 || raid > RAID_UNKNOWN) + raid = RAID_UNKNOWN; - pde = create_proc_read_entry(hba[i]->devname, - S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, - proc_cciss, cciss_proc_get_info, hba[i]); - pde->write_proc = cciss_proc_write; + return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n", + raid_label[raid]); +} +static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); + +static ssize_t cciss_show_usage_count(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + unsigned long flags; + int count; + + spin_lock_irqsave(&h->lock, flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(&h->lock, flags); + return -EBUSY; + } + count = drv->usage_count; + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "%d\n", count); +} +static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); + +static struct attribute *cciss_host_attrs[] = { + &dev_attr_rescan.attr, + &dev_attr_resettable.attr, + &dev_attr_transport_mode.attr, + NULL +}; + +static struct attribute_group cciss_host_attr_group = { + .attrs = cciss_host_attrs, +}; + +static const struct attribute_group *cciss_host_attr_groups[] = { + &cciss_host_attr_group, + NULL +}; + +static struct device_type cciss_host_type = { + .name = "cciss_host", + .groups = cciss_host_attr_groups, + .release = cciss_hba_release, +}; + +static struct attribute *cciss_dev_attrs[] = { + &dev_attr_unique_id.attr, + &dev_attr_model.attr, + &dev_attr_vendor.attr, + &dev_attr_rev.attr, + &dev_attr_lunid.attr, + &dev_attr_raid_level.attr, + &dev_attr_usage_count.attr, + NULL +}; + +static struct attribute_group cciss_dev_attr_group = { + .attrs = cciss_dev_attrs, +}; + +static const struct attribute_group *cciss_dev_attr_groups[] = { + &cciss_dev_attr_group, + NULL +}; + +static struct device_type cciss_dev_type = { + .name = "cciss_device", + .groups = cciss_dev_attr_groups, + .release = cciss_device_release, +}; + +static struct bus_type cciss_bus_type = { + .name = "cciss", +}; + +/* + * cciss_hba_release is called when the reference count + * of h->dev goes to zero. + */ +static void cciss_hba_release(struct device *dev) +{ + /* + * nothing to do, but need this to avoid a warning + * about not having a release handler from lib/kref.c. + */ +} + +/* + * Initialize sysfs entry for each controller. This sets up and registers + * the 'cciss#' directory for each individual controller under + * /sys/bus/pci/devices/<dev>/. + */ +static int cciss_create_hba_sysfs_entry(struct ctlr_info *h) +{ + device_initialize(&h->dev); + h->dev.type = &cciss_host_type; + h->dev.bus = &cciss_bus_type; + dev_set_name(&h->dev, "%s", h->devname); + h->dev.parent = &h->pdev->dev; + + return device_add(&h->dev); +} + +/* + * Remove sysfs entries for an hba. + */ +static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) +{ + device_del(&h->dev); + put_device(&h->dev); /* final put. */ +} + +/* cciss_device_release is called when the reference count + * of h->drv[x]dev goes to zero. + */ +static void cciss_device_release(struct device *dev) +{ + drive_info_struct *drv = to_drv(dev); + kfree(drv); +} + +/* + * Initialize sysfs for each logical drive. This sets up and registers + * the 'c#d#' directory for each individual logical drive under + * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from + * /sys/block/cciss!c#d# to this entry. + */ +static long cciss_create_ld_sysfs_entry(struct ctlr_info *h, + int drv_index) +{ + struct device *dev; + + if (h->drv[drv_index]->device_initialized) + return 0; + + dev = &h->drv[drv_index]->dev; + device_initialize(dev); + dev->type = &cciss_dev_type; + dev->bus = &cciss_bus_type; + dev_set_name(dev, "c%dd%d", h->ctlr, drv_index); + dev->parent = &h->dev; + h->drv[drv_index]->device_initialized = 1; + return device_add(dev); +} + +/* + * Remove sysfs entries for a logical drive. + */ +static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index, + int ctlr_exiting) +{ + struct device *dev = &h->drv[drv_index]->dev; + + /* special case for c*d0, we only destroy it on controller exit */ + if (drv_index == 0 && !ctlr_exiting) + return; + + device_del(dev); + put_device(dev); /* the "final" put. */ + h->drv[drv_index] = NULL; } -#endif /* CONFIG_PROC_FS */ /* * For operations that cannot sleep, a command block is allocated at init, * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track - * which ones are free or in use. For operations that can wait for kmalloc - * to possible sleep, this routine can be called with get_from_pool set to 0. - * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was. + * which ones are free or in use. */ -static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool) +static CommandList_struct *cmd_alloc(ctlr_info_t *h) { CommandList_struct *c; int i; u64bit temp64; dma_addr_t cmd_dma_handle, err_dma_handle; - if (!get_from_pool) { - c = (CommandList_struct *) pci_alloc_consistent(h->pdev, - sizeof(CommandList_struct), &cmd_dma_handle); - if (c == NULL) + do { + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) return NULL; - memset(c, 0, sizeof(CommandList_struct)); + } while (test_and_set_bit(i, h->cmd_pool_bits) != 0); + c = h->cmd_pool + i; + memset(c, 0, sizeof(CommandList_struct)); + cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct); + c->err_info = h->errinfo_pool + i; + memset(c->err_info, 0, sizeof(ErrorInfo_struct)); + err_dma_handle = h->errinfo_pool_dhandle + + i * sizeof(ErrorInfo_struct); + h->nr_allocs++; - c->cmdindex = -1; + c->cmdindex = i; - c->err_info = (ErrorInfo_struct *) - pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct), - &err_dma_handle); + INIT_LIST_HEAD(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(ErrorInfo_struct); - if (c->err_info == NULL) { - pci_free_consistent(h->pdev, - sizeof(CommandList_struct), c, cmd_dma_handle); - return NULL; - } - memset(c->err_info, 0, sizeof(ErrorInfo_struct)); - } else { /* get it out of the controllers pool */ - - do { - i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); - if (i == NR_CMDS) - return NULL; - } while (test_and_set_bit - (i & (BITS_PER_LONG - 1), - h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: using command buffer %d\n", i); -#endif - c = h->cmd_pool + i; - memset(c, 0, sizeof(CommandList_struct)); - cmd_dma_handle = h->cmd_pool_dhandle - + i * sizeof(CommandList_struct); - c->err_info = h->errinfo_pool + i; - memset(c->err_info, 0, sizeof(ErrorInfo_struct)); - err_dma_handle = h->errinfo_pool_dhandle - + i * sizeof(ErrorInfo_struct); - h->nr_allocs++; + c->ctlr = h->ctlr; + return c; +} - c->cmdindex = i; +/* allocate a command using pci_alloc_consistent, used for ioctls, + * etc., not for the main i/o path. + */ +static CommandList_struct *cmd_special_alloc(ctlr_info_t *h) +{ + CommandList_struct *c; + u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + c = (CommandList_struct *) pci_alloc_consistent(h->pdev, + sizeof(CommandList_struct), &cmd_dma_handle); + if (c == NULL) + return NULL; + memset(c, 0, sizeof(CommandList_struct)); + + c->cmdindex = -1; + + c->err_info = (ErrorInfo_struct *) + pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct), + &err_dma_handle); + + if (c->err_info == NULL) { + pci_free_consistent(h->pdev, + sizeof(CommandList_struct), c, cmd_dma_handle); + return NULL; } + memset(c->err_info, 0, sizeof(ErrorInfo_struct)); + INIT_LIST_HEAD(&c->list); c->busaddr = (__u32) cmd_dma_handle; temp64.val = (__u64) err_dma_handle; c->ErrDesc.Addr.lower = temp64.val32.lower; @@ -433,27 +1044,25 @@ static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool) return c; } -/* - * Frees a command block that was previously allocated with cmd_alloc(). - */ -static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool) +static void cmd_free(ctlr_info_t *h, CommandList_struct *c) { int i; + + i = c - h->cmd_pool; + clear_bit(i, h->cmd_pool_bits); + h->nr_frees++; +} + +static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c) +{ u64bit temp64; - if (!got_from_pool) { - temp64.val32.lower = c->ErrDesc.Addr.lower; - temp64.val32.upper = c->ErrDesc.Addr.upper; - pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), - c->err_info, (dma_addr_t) temp64.val); - pci_free_consistent(h->pdev, sizeof(CommandList_struct), - c, (dma_addr_t) c->busaddr); - } else { - i = c - h->cmd_pool; - clear_bit(i & (BITS_PER_LONG - 1), - h->cmd_pool_bits + (i / BITS_PER_LONG)); - h->nr_frees++; - } + temp64.val32.lower = c->ErrDesc.Addr.lower; + temp64.val32.upper = c->ErrDesc.Addr.upper; + pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), + c->err_info, (dma_addr_t) temp64.val); + pci_free_consistent(h->pdev, sizeof(CommandList_struct), c, + (dma_addr_t) cciss_tag_discard_error_bits(h, (u32) c->busaddr)); } static inline ctlr_info_t *get_host(struct gendisk *disk) @@ -469,16 +1078,13 @@ static inline drive_info_struct *get_drv(struct gendisk *disk) /* * Open. Make sure the device is really there. */ -static int cciss_open(struct inode *inode, struct file *filep) +static int cciss_open(struct block_device *bdev, fmode_t mode) { - ctlr_info_t *host = get_host(inode->i_bdev->bd_disk); - drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk); - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name); -#endif /* CCISS_DEBUG */ + ctlr_info_t *h = get_host(bdev->bd_disk); + drive_info_struct *drv = get_drv(bdev->bd_disk); - if (host->busy_initializing || drv->busy_configuring) + dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name); + if (drv->busy_configuring) return -EBUSY; /* * Root is allowed to open raw volume zero even if it's not configured @@ -488,13 +1094,14 @@ static int cciss_open(struct inode *inode, struct file *filep) * but I'm already using way to many device nodes to claim another one * for "raw controller". */ - if (drv->nr_blocks == 0) { - if (iminor(inode) != 0) { /* not node 0? */ + if (drv->heads == 0) { + if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */ /* if not node 0 make sure it is a partition = 0 */ - if (iminor(inode) & 0x0f) { + if (MINOR(bdev->bd_dev) & 0x0f) { return -ENXIO; /* if it is, make sure we have a LUN ID */ - } else if (drv->LunID == 0) { + } else if (memcmp(drv->LunID, CTLR_LUNID, + sizeof(drv->LunID))) { return -ENXIO; } } @@ -502,45 +1109,47 @@ static int cciss_open(struct inode *inode, struct file *filep) return -EPERM; } drv->usage_count++; - host->usage_count++; + h->usage_count++; return 0; } +static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode) +{ + int ret; + + mutex_lock(&cciss_mutex); + ret = cciss_open(bdev, mode); + mutex_unlock(&cciss_mutex); + + return ret; +} + /* * Close. Sync first. */ -static int cciss_release(struct inode *inode, struct file *filep) +static void cciss_release(struct gendisk *disk, fmode_t mode) { - ctlr_info_t *host = get_host(inode->i_bdev->bd_disk); - drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk); - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss_release %s\n", - inode->i_bdev->bd_disk->disk_name); -#endif /* CCISS_DEBUG */ + ctlr_info_t *h; + drive_info_struct *drv; + mutex_lock(&cciss_mutex); + h = get_host(disk); + drv = get_drv(disk); + dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name); drv->usage_count--; - host->usage_count--; - return 0; + h->usage_count--; + mutex_unlock(&cciss_mutex); } #ifdef CONFIG_COMPAT -static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg) -{ - int ret; - lock_kernel(); - ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg); - unlock_kernel(); - return ret; -} - -static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, - unsigned long arg); -static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd, - unsigned long arg); +static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg); +static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg); -static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg) +static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg) { switch (cmd) { case CCISS_GETPCIINFO: @@ -558,20 +1167,20 @@ static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg) case CCISS_REGNEWD: case CCISS_RESCANDISK: case CCISS_GETLUNINFO: - return do_ioctl(f, cmd, arg); + return cciss_ioctl(bdev, mode, cmd, arg); case CCISS_PASSTHRU32: - return cciss_ioctl32_passthru(f, cmd, arg); + return cciss_ioctl32_passthru(bdev, mode, cmd, arg); case CCISS_BIG_PASSTHRU32: - return cciss_ioctl32_big_passthru(f, cmd, arg); + return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg); default: return -ENOIOCTLCMD; } } -static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, - unsigned long arg) +static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg) { IOCTL32_Command_struct __user *arg32 = (IOCTL32_Command_struct __user *) arg; @@ -580,6 +1189,7 @@ static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, int err; u32 cp; + memset(&arg64, 0, sizeof(arg64)); err = 0; err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, @@ -598,7 +1208,7 @@ static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, if (err) return -EFAULT; - err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -609,8 +1219,8 @@ static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, return err; } -static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, - unsigned long arg) +static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg) { BIG_IOCTL32_Command_struct __user *arg32 = (BIG_IOCTL32_Command_struct __user *) arg; @@ -620,6 +1230,7 @@ static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, int err; u32 cp; + memset(&arg64, 0, sizeof(arg64)); err = 0; err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, @@ -639,7 +1250,7 @@ static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, if (err) return -EFAULT; - err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p); + err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); if (err) return err; err |= @@ -664,574 +1275,495 @@ static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -/* - * ioctl - */ -static int cciss_ioctl(struct inode *inode, struct file *filep, - unsigned int cmd, unsigned long arg) +static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c) { - struct block_device *bdev = inode->i_bdev; - struct gendisk *disk = bdev->bd_disk; - ctlr_info_t *host = get_host(disk); - drive_info_struct *drv = get_drv(disk); - int ctlr = host->ctlr; - void __user *argp = (void __user *)arg; + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) + (void)check_for_unit_attention(h, c); +} -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg); -#endif /* CCISS_DEBUG */ +static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp) +{ + cciss_pci_info_struct pciinfo; - switch (cmd) { - case CCISS_GETPCIINFO: - { - cciss_pci_info_struct pciinfo; - - if (!arg) - return -EINVAL; - pciinfo.domain = pci_domain_nr(host->pdev->bus); - pciinfo.bus = host->pdev->bus->number; - pciinfo.dev_fn = host->pdev->devfn; - pciinfo.board_id = host->board_id; - if (copy_to_user - (argp, &pciinfo, sizeof(cciss_pci_info_struct))) - return -EFAULT; - return 0; - } - case CCISS_GETINTINFO: - { - cciss_coalint_struct intinfo; - if (!arg) - return -EINVAL; - intinfo.delay = - readl(&host->cfgtable->HostWrite.CoalIntDelay); - intinfo.count = - readl(&host->cfgtable->HostWrite.CoalIntCount); - if (copy_to_user - (argp, &intinfo, sizeof(cciss_coalint_struct))) - return -EFAULT; - return 0; - } - case CCISS_SETINTINFO: - { - cciss_coalint_struct intinfo; - unsigned long flags; - int i; - - if (!arg) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (copy_from_user - (&intinfo, argp, sizeof(cciss_coalint_struct))) - return -EFAULT; - if ((intinfo.delay == 0) && (intinfo.count == 0)) - { -// printk("cciss_ioctl: delay and count cannot be 0\n"); - return -EINVAL; - } - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - /* Update the field, and then ring the doorbell */ - writel(intinfo.delay, - &(host->cfgtable->HostWrite.CoalIntDelay)); - writel(intinfo.count, - &(host->cfgtable->HostWrite.CoalIntCount)); - writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); - - for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { - if (!(readl(host->vaddr + SA5_DOORBELL) - & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - udelay(1000); - } - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - if (i >= MAX_IOCTL_CONFIG_WAIT) - return -EAGAIN; - return 0; - } - case CCISS_GETNODENAME: - { - NodeName_type NodeName; - int i; - - if (!arg) - return -EINVAL; - for (i = 0; i < 16; i++) - NodeName[i] = - readb(&host->cfgtable->ServerName[i]); - if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) - return -EFAULT; - return 0; - } - case CCISS_SETNODENAME: - { - NodeName_type NodeName; - unsigned long flags; - int i; + if (!argp) + return -EINVAL; + pciinfo.domain = pci_domain_nr(h->pdev->bus); + pciinfo.bus = h->pdev->bus->number; + pciinfo.dev_fn = h->pdev->devfn; + pciinfo.board_id = h->board_id; + if (copy_to_user(argp, &pciinfo, sizeof(cciss_pci_info_struct))) + return -EFAULT; + return 0; +} - if (!arg) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; +static int cciss_getintinfo(ctlr_info_t *h, void __user *argp) +{ + cciss_coalint_struct intinfo; + unsigned long flags; - if (copy_from_user - (NodeName, argp, sizeof(NodeName_type))) - return -EFAULT; + if (!argp) + return -EINVAL; + spin_lock_irqsave(&h->lock, flags); + intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay); + intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount); + spin_unlock_irqrestore(&h->lock, flags); + if (copy_to_user + (argp, &intinfo, sizeof(cciss_coalint_struct))) + return -EFAULT; + return 0; +} - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); +static int cciss_setintinfo(ctlr_info_t *h, void __user *argp) +{ + cciss_coalint_struct intinfo; + unsigned long flags; + int i; - /* Update the field, and then ring the doorbell */ - for (i = 0; i < 16; i++) - writeb(NodeName[i], - &host->cfgtable->ServerName[i]); + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (copy_from_user(&intinfo, argp, sizeof(intinfo))) + return -EFAULT; + if ((intinfo.delay == 0) && (intinfo.count == 0)) + return -EINVAL; + spin_lock_irqsave(&h->lock, flags); + /* Update the field, and then ring the doorbell */ + writel(intinfo.delay, &(h->cfgtable->HostWrite.CoalIntDelay)); + writel(intinfo.count, &(h->cfgtable->HostWrite.CoalIntCount)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); + for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + udelay(1000); /* delay and try again */ + } + spin_unlock_irqrestore(&h->lock, flags); + if (i >= MAX_IOCTL_CONFIG_WAIT) + return -EAGAIN; + return 0; +} - for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { - if (!(readl(host->vaddr + SA5_DOORBELL) - & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - udelay(1000); - } - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - if (i >= MAX_IOCTL_CONFIG_WAIT) - return -EAGAIN; - return 0; - } +static int cciss_getnodename(ctlr_info_t *h, void __user *argp) +{ + NodeName_type NodeName; + unsigned long flags; + int i; - case CCISS_GETHEARTBEAT: - { - Heartbeat_type heartbeat; - - if (!arg) - return -EINVAL; - heartbeat = readl(&host->cfgtable->HeartBeat); - if (copy_to_user - (argp, &heartbeat, sizeof(Heartbeat_type))) - return -EFAULT; - return 0; - } - case CCISS_GETBUSTYPES: - { - BusTypes_type BusTypes; - - if (!arg) - return -EINVAL; - BusTypes = readl(&host->cfgtable->BusTypes); - if (copy_to_user - (argp, &BusTypes, sizeof(BusTypes_type))) - return -EFAULT; - return 0; - } - case CCISS_GETFIRMVER: - { - FirmwareVer_type firmware; + if (!argp) + return -EINVAL; + spin_lock_irqsave(&h->lock, flags); + for (i = 0; i < 16; i++) + NodeName[i] = readb(&h->cfgtable->ServerName[i]); + spin_unlock_irqrestore(&h->lock, flags); + if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) + return -EFAULT; + return 0; +} - if (!arg) - return -EINVAL; - memcpy(firmware, host->firm_ver, 4); +static int cciss_setnodename(ctlr_info_t *h, void __user *argp) +{ + NodeName_type NodeName; + unsigned long flags; + int i; - if (copy_to_user - (argp, firmware, sizeof(FirmwareVer_type))) - return -EFAULT; - return 0; - } - case CCISS_GETDRIVVER: - { - DriverVer_type DriverVer = DRIVER_VERSION; + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (copy_from_user(NodeName, argp, sizeof(NodeName_type))) + return -EFAULT; + spin_lock_irqsave(&h->lock, flags); + /* Update the field, and then ring the doorbell */ + for (i = 0; i < 16; i++) + writeb(NodeName[i], &h->cfgtable->ServerName[i]); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + udelay(1000); /* delay and try again */ + } + spin_unlock_irqrestore(&h->lock, flags); + if (i >= MAX_IOCTL_CONFIG_WAIT) + return -EAGAIN; + return 0; +} - if (!arg) - return -EINVAL; +static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp) +{ + Heartbeat_type heartbeat; + unsigned long flags; - if (copy_to_user - (argp, &DriverVer, sizeof(DriverVer_type))) - return -EFAULT; - return 0; - } + if (!argp) + return -EINVAL; + spin_lock_irqsave(&h->lock, flags); + heartbeat = readl(&h->cfgtable->HeartBeat); + spin_unlock_irqrestore(&h->lock, flags); + if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type))) + return -EFAULT; + return 0; +} - case CCISS_REVALIDVOLS: - if (bdev != bdev->bd_contains || drv != host->drv) - return -ENXIO; - return revalidate_allvol(host); - - case CCISS_GETLUNINFO:{ - LogvolInfo_struct luninfo; - - luninfo.LunID = drv->LunID; - luninfo.num_opens = drv->usage_count; - luninfo.num_parts = 0; - if (copy_to_user(argp, &luninfo, - sizeof(LogvolInfo_struct))) - return -EFAULT; - return 0; - } - case CCISS_DEREGDISK: - return rebuild_lun_table(host, disk); +static int cciss_getbustypes(ctlr_info_t *h, void __user *argp) +{ + BusTypes_type BusTypes; + unsigned long flags; - case CCISS_REGNEWD: - return rebuild_lun_table(host, NULL); + if (!argp) + return -EINVAL; + spin_lock_irqsave(&h->lock, flags); + BusTypes = readl(&h->cfgtable->BusTypes); + spin_unlock_irqrestore(&h->lock, flags); + if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type))) + return -EFAULT; + return 0; +} - case CCISS_PASSTHRU: - { - IOCTL_Command_struct iocommand; - CommandList_struct *c; - char *buff = NULL; - u64bit temp64; - unsigned long flags; - DECLARE_COMPLETION(wait); - - if (!arg) - return -EINVAL; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - if (copy_from_user - (&iocommand, argp, sizeof(IOCTL_Command_struct))) - return -EFAULT; - if ((iocommand.buf_size < 1) && - (iocommand.Request.Type.Direction != XFER_NONE)) { - return -EINVAL; - } -#if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */ - /* Check kmalloc limits */ - if (iocommand.buf_size > 128000) - return -EINVAL; -#endif - if (iocommand.buf_size > 0) { - buff = kmalloc(iocommand.buf_size, GFP_KERNEL); - if (buff == NULL) - return -EFAULT; - } - if (iocommand.Request.Type.Direction == XFER_WRITE) { - /* Copy the data into the buffer we created */ - if (copy_from_user - (buff, iocommand.buf, iocommand.buf_size)) { - kfree(buff); - return -EFAULT; - } - } else { - memset(buff, 0, iocommand.buf_size); - } - if ((c = cmd_alloc(host, 0)) == NULL) { - kfree(buff); - return -ENOMEM; - } - // Fill in the command type - c->cmd_type = CMD_IOCTL_PEND; - // Fill in Command Header - c->Header.ReplyQueue = 0; // unused in simple mode - if (iocommand.buf_size > 0) // buffer to fill - { - c->Header.SGList = 1; - c->Header.SGTotal = 1; - } else // no buffers to fill - { - c->Header.SGList = 0; - c->Header.SGTotal = 0; - } - c->Header.LUN = iocommand.LUN_info; - c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag - - // Fill in Request block - c->Request = iocommand.Request; - - // Fill in the scatter gather information - if (iocommand.buf_size > 0) { - temp64.val = pci_map_single(host->pdev, buff, - iocommand.buf_size, - PCI_DMA_BIDIRECTIONAL); - c->SG[0].Addr.lower = temp64.val32.lower; - c->SG[0].Addr.upper = temp64.val32.upper; - c->SG[0].Len = iocommand.buf_size; - c->SG[0].Ext = 0; // we are not chaining - } - c->waiting = &wait; - - /* Put the request on the tail of the request queue */ - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - addQ(&host->reqQ, c); - host->Qdepth++; - start_io(host); - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - - wait_for_completion(&wait); - - /* unlock the buffers from DMA */ - temp64.val32.lower = c->SG[0].Addr.lower; - temp64.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(host->pdev, (dma_addr_t) temp64.val, - iocommand.buf_size, - PCI_DMA_BIDIRECTIONAL); - - /* Copy the error information out */ - iocommand.error_info = *(c->err_info); - if (copy_to_user - (argp, &iocommand, sizeof(IOCTL_Command_struct))) { - kfree(buff); - cmd_free(host, c, 0); - return -EFAULT; - } +static int cciss_getfirmver(ctlr_info_t *h, void __user *argp) +{ + FirmwareVer_type firmware; - if (iocommand.Request.Type.Direction == XFER_READ) { - /* Copy the data out of the buffer we created */ - if (copy_to_user - (iocommand.buf, buff, iocommand.buf_size)) { - kfree(buff); - cmd_free(host, c, 0); - return -EFAULT; - } - } + if (!argp) + return -EINVAL; + memcpy(firmware, h->firm_ver, 4); + + if (copy_to_user + (argp, firmware, sizeof(FirmwareVer_type))) + return -EFAULT; + return 0; +} + +static int cciss_getdrivver(ctlr_info_t *h, void __user *argp) +{ + DriverVer_type DriverVer = DRIVER_VERSION; + + if (!argp) + return -EINVAL; + if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) + return -EFAULT; + return 0; +} + +static int cciss_getluninfo(ctlr_info_t *h, + struct gendisk *disk, void __user *argp) +{ + LogvolInfo_struct luninfo; + drive_info_struct *drv = get_drv(disk); + + if (!argp) + return -EINVAL; + memcpy(&luninfo.LunID, drv->LunID, sizeof(luninfo.LunID)); + luninfo.num_opens = drv->usage_count; + luninfo.num_parts = 0; + if (copy_to_user(argp, &luninfo, sizeof(LogvolInfo_struct))) + return -EFAULT; + return 0; +} + +static int cciss_passthru(ctlr_info_t *h, void __user *argp) +{ + IOCTL_Command_struct iocommand; + CommandList_struct *c; + char *buff = NULL; + u64bit temp64; + DECLARE_COMPLETION_ONSTACK(wait); + + if (!argp) + return -EINVAL; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + if (copy_from_user + (&iocommand, argp, sizeof(IOCTL_Command_struct))) + return -EFAULT; + if ((iocommand.buf_size < 1) && + (iocommand.Request.Type.Direction != XFER_NONE)) { + return -EINVAL; + } + if (iocommand.buf_size > 0) { + buff = kmalloc(iocommand.buf_size, GFP_KERNEL); + if (buff == NULL) + return -EFAULT; + } + if (iocommand.Request.Type.Direction == XFER_WRITE) { + /* Copy the data into the buffer we created */ + if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { kfree(buff); - cmd_free(host, c, 0); - return 0; + return -EFAULT; } - case CCISS_BIG_PASSTHRU:{ - BIG_IOCTL_Command_struct *ioc; - CommandList_struct *c; - unsigned char **buff = NULL; - int *buff_size = NULL; - u64bit temp64; - unsigned long flags; - BYTE sg_used = 0; - int status = 0; - int i; - DECLARE_COMPLETION(wait); - __u32 left; - __u32 sz; - BYTE __user *data_ptr; - - if (!arg) - return -EINVAL; - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - ioc = (BIG_IOCTL_Command_struct *) - kmalloc(sizeof(*ioc), GFP_KERNEL); - if (!ioc) { - status = -ENOMEM; - goto cleanup1; - } - if (copy_from_user(ioc, argp, sizeof(*ioc))) { - status = -EFAULT; - goto cleanup1; - } - if ((ioc->buf_size < 1) && - (ioc->Request.Type.Direction != XFER_NONE)) { - status = -EINVAL; - goto cleanup1; - } - /* Check kmalloc limits using all SGs */ - if (ioc->malloc_size > MAX_KMALLOC_SIZE) { - status = -EINVAL; - goto cleanup1; - } - if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { - status = -EINVAL; - goto cleanup1; - } - buff = - kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); - if (!buff) { - status = -ENOMEM; - goto cleanup1; - } - buff_size = (int *)kmalloc(MAXSGENTRIES * sizeof(int), - GFP_KERNEL); - if (!buff_size) { - status = -ENOMEM; - goto cleanup1; - } - left = ioc->buf_size; - data_ptr = ioc->buf; - while (left) { - sz = (left > - ioc->malloc_size) ? ioc-> - malloc_size : left; - buff_size[sg_used] = sz; - buff[sg_used] = kmalloc(sz, GFP_KERNEL); - if (buff[sg_used] == NULL) { - status = -ENOMEM; - goto cleanup1; - } - if (ioc->Request.Type.Direction == XFER_WRITE) { - if (copy_from_user - (buff[sg_used], data_ptr, sz)) { - status = -ENOMEM; - goto cleanup1; - } - } else { - memset(buff[sg_used], 0, sz); - } - left -= sz; - data_ptr += sz; - sg_used++; - } - if ((c = cmd_alloc(host, 0)) == NULL) { - status = -ENOMEM; - goto cleanup1; - } - c->cmd_type = CMD_IOCTL_PEND; - c->Header.ReplyQueue = 0; + } else { + memset(buff, 0, iocommand.buf_size); + } + c = cmd_special_alloc(h); + if (!c) { + kfree(buff); + return -ENOMEM; + } + /* Fill in the command type */ + c->cmd_type = CMD_IOCTL_PEND; + /* Fill in Command Header */ + c->Header.ReplyQueue = 0; /* unused in simple mode */ + if (iocommand.buf_size > 0) { /* buffer to fill */ + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { /* no buffers to fill */ + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + c->Header.LUN = iocommand.LUN_info; + /* use the kernel address the cmd block for tag */ + c->Header.Tag.lower = c->busaddr; - if (ioc->buf_size > 0) { - c->Header.SGList = sg_used; - c->Header.SGTotal = sg_used; - } else { - c->Header.SGList = 0; - c->Header.SGTotal = 0; - } - c->Header.LUN = ioc->LUN_info; - c->Header.Tag.lower = c->busaddr; - - c->Request = ioc->Request; - if (ioc->buf_size > 0) { - int i; - for (i = 0; i < sg_used; i++) { - temp64.val = - pci_map_single(host->pdev, buff[i], - buff_size[i], - PCI_DMA_BIDIRECTIONAL); - c->SG[i].Addr.lower = - temp64.val32.lower; - c->SG[i].Addr.upper = - temp64.val32.upper; - c->SG[i].Len = buff_size[i]; - c->SG[i].Ext = 0; /* we are not chaining */ - } - } - c->waiting = &wait; - /* Put the request on the tail of the request queue */ - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - addQ(&host->reqQ, c); - host->Qdepth++; - start_io(host); - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - wait_for_completion(&wait); - /* unlock the buffers from DMA */ - for (i = 0; i < sg_used; i++) { - temp64.val32.lower = c->SG[i].Addr.lower; - temp64.val32.upper = c->SG[i].Addr.upper; - pci_unmap_single(host->pdev, - (dma_addr_t) temp64.val, buff_size[i], - PCI_DMA_BIDIRECTIONAL); - } - /* Copy the error information out */ - ioc->error_info = *(c->err_info); - if (copy_to_user(argp, ioc, sizeof(*ioc))) { - cmd_free(host, c, 0); - status = -EFAULT; - goto cleanup1; - } - if (ioc->Request.Type.Direction == XFER_READ) { - /* Copy the data out of the buffer we created */ - BYTE __user *ptr = ioc->buf; - for (i = 0; i < sg_used; i++) { - if (copy_to_user - (ptr, buff[i], buff_size[i])) { - cmd_free(host, c, 0); - status = -EFAULT; - goto cleanup1; - } - ptr += buff_size[i]; - } - } - cmd_free(host, c, 0); - status = 0; - cleanup1: - if (buff) { - for (i = 0; i < sg_used; i++) - kfree(buff[i]); - kfree(buff); - } - kfree(buff_size); - kfree(ioc); - return status; + /* Fill in Request block */ + c->Request = iocommand.Request; + + /* Fill in the scatter gather information */ + if (iocommand.buf_size > 0) { + temp64.val = pci_map_single(h->pdev, buff, + iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + c->SG[0].Addr.lower = temp64.val32.lower; + c->SG[0].Addr.upper = temp64.val32.upper; + c->SG[0].Len = iocommand.buf_size; + c->SG[0].Ext = 0; /* we are not chaining */ + } + c->waiting = &wait; + + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); + + /* unlock the buffers from DMA */ + temp64.val32.lower = c->SG[0].Addr.lower; + temp64.val32.upper = c->SG[0].Addr.upper; + pci_unmap_single(h->pdev, (dma_addr_t) temp64.val, iocommand.buf_size, + PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + + /* Copy the error information out */ + iocommand.error_info = *(c->err_info); + if (copy_to_user(argp, &iocommand, sizeof(IOCTL_Command_struct))) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + + if (iocommand.Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; } - default: - return -ENOTTY; } + kfree(buff); + cmd_special_free(h, c); + return 0; } -/* - * revalidate_allvol is for online array config utilities. After a - * utility reconfigures the drives in the array, it can use this function - * (through an ioctl) to make the driver zap any previous disk structs for - * that controller and get new ones. - * - * Right now I'm using the getgeometry() function to do this, but this - * function should probably be finer grained and allow you to revalidate one - * particular logical volume (instead of all of them on a particular - * controller). - */ -static int revalidate_allvol(ctlr_info_t *host) +static int cciss_bigpassthru(ctlr_info_t *h, void __user *argp) { - int ctlr = host->ctlr, i; - unsigned long flags; + BIG_IOCTL_Command_struct *ioc; + CommandList_struct *c; + unsigned char **buff = NULL; + int *buff_size = NULL; + u64bit temp64; + BYTE sg_used = 0; + int status = 0; + int i; + DECLARE_COMPLETION_ONSTACK(wait); + __u32 left; + __u32 sz; + BYTE __user *data_ptr; - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - if (host->usage_count > 1) { - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - printk(KERN_WARNING "cciss: Device busy for volume" - " revalidation (usage=%d)\n", host->usage_count); - return -EBUSY; + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + ioc = kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) { + status = -ENOMEM; + goto cleanup1; } - host->usage_count++; - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - - for (i = 0; i < NWD; i++) { - struct gendisk *disk = host->gendisk[i]; - if (disk) { - request_queue_t *q = disk->queue; - - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - if (q) - blk_cleanup_queue(q); + if (copy_from_user(ioc, argp, sizeof(*ioc))) { + status = -EFAULT; + goto cleanup1; + } + if ((ioc->buf_size < 1) && + (ioc->Request.Type.Direction != XFER_NONE)) { + status = -EINVAL; + goto cleanup1; + } + /* Check kmalloc limits using all SGs */ + if (ioc->malloc_size > MAX_KMALLOC_SIZE) { + status = -EINVAL; + goto cleanup1; + } + if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + status = -EINVAL; + goto cleanup1; + } + buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + if (!buff) { + status = -ENOMEM; + goto cleanup1; + } + buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + if (!buff_size) { + status = -ENOMEM; + goto cleanup1; + } + left = ioc->buf_size; + data_ptr = ioc->buf; + while (left) { + sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; + buff_size[sg_used] = sz; + buff[sg_used] = kmalloc(sz, GFP_KERNEL); + if (buff[sg_used] == NULL) { + status = -ENOMEM; + goto cleanup1; } + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { + status = -EFAULT; + goto cleanup1; + } + } else { + memset(buff[sg_used], 0, sz); + } + left -= sz; + data_ptr += sz; + sg_used++; } + c = cmd_special_alloc(h); + if (!c) { + status = -ENOMEM; + goto cleanup1; + } + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + c->Header.SGList = sg_used; + c->Header.SGTotal = sg_used; + c->Header.LUN = ioc->LUN_info; + c->Header.Tag.lower = c->busaddr; - /* - * Set the partition and block size structures for all volumes - * on this controller to zero. We will reread all of this data - */ - memset(host->drv, 0, sizeof(drive_info_struct) - * CISS_MAX_LUN); - /* - * Tell the array controller not to give us any interrupts while - * we check the new geometry. Then turn interrupts back on when - * we're done. - */ - host->access.set_intr_mask(host, CCISS_INTR_OFF); - cciss_getgeometry(ctlr); - host->access.set_intr_mask(host, CCISS_INTR_ON); - - /* Loop through each real device */ - for (i = 0; i < NWD; i++) { - struct gendisk *disk = host->gendisk[i]; - drive_info_struct *drv = &(host->drv[i]); - /* we must register the controller even if no disks exist */ - /* this is for the online array utilities */ - if (!drv->heads && i) - continue; - blk_queue_hardsect_size(drv->queue, drv->block_size); - set_capacity(disk, drv->nr_blocks); - add_disk(disk); + c->Request = ioc->Request; + for (i = 0; i < sg_used; i++) { + temp64.val = pci_map_single(h->pdev, buff[i], buff_size[i], + PCI_DMA_BIDIRECTIONAL); + c->SG[i].Addr.lower = temp64.val32.lower; + c->SG[i].Addr.upper = temp64.val32.upper; + c->SG[i].Len = buff_size[i]; + c->SG[i].Ext = 0; /* we are not chaining */ } - host->usage_count--; - return 0; + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); + /* unlock the buffers from DMA */ + for (i = 0; i < sg_used; i++) { + temp64.val32.lower = c->SG[i].Addr.lower; + temp64.val32.upper = c->SG[i].Addr.upper; + pci_unmap_single(h->pdev, + (dma_addr_t) temp64.val, buff_size[i], + PCI_DMA_BIDIRECTIONAL); + } + check_ioctl_unit_attention(h, c); + /* Copy the error information out */ + ioc->error_info = *(c->err_info); + if (copy_to_user(argp, ioc, sizeof(*ioc))) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + BYTE __user *ptr = ioc->buf; + for (i = 0; i < sg_used; i++) { + if (copy_to_user(ptr, buff[i], buff_size[i])) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + ptr += buff_size[i]; + } + } + cmd_special_free(h, c); + status = 0; +cleanup1: + if (buff) { + for (i = 0; i < sg_used; i++) + kfree(buff[i]); + kfree(buff); + } + kfree(buff_size); + kfree(ioc); + return status; } -static inline void complete_buffers(struct bio *bio, int status) +static int cciss_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) { - while (bio) { - struct bio *xbh = bio->bi_next; - int nr_sectors = bio_sectors(bio); + struct gendisk *disk = bdev->bd_disk; + ctlr_info_t *h = get_host(disk); + void __user *argp = (void __user *)arg; - bio->bi_next = NULL; - blk_finished_io(len); - bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO); - bio = xbh; + dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n", + cmd, arg); + switch (cmd) { + case CCISS_GETPCIINFO: + return cciss_getpciinfo(h, argp); + case CCISS_GETINTINFO: + return cciss_getintinfo(h, argp); + case CCISS_SETINTINFO: + return cciss_setintinfo(h, argp); + case CCISS_GETNODENAME: + return cciss_getnodename(h, argp); + case CCISS_SETNODENAME: + return cciss_setnodename(h, argp); + case CCISS_GETHEARTBEAT: + return cciss_getheartbeat(h, argp); + case CCISS_GETBUSTYPES: + return cciss_getbustypes(h, argp); + case CCISS_GETFIRMVER: + return cciss_getfirmver(h, argp); + case CCISS_GETDRIVVER: + return cciss_getdrivver(h, argp); + case CCISS_DEREGDISK: + case CCISS_REGNEWD: + case CCISS_REVALIDVOLS: + return rebuild_lun_table(h, 0, 1); + case CCISS_GETLUNINFO: + return cciss_getluninfo(h, disk, argp); + case CCISS_PASSTHRU: + return cciss_passthru(h, argp); + case CCISS_BIG_PASSTHRU: + return cciss_bigpassthru(h, argp); + + /* scsi_cmd_blk_ioctl handles these, below, though some are not */ + /* very meaningful for cciss. SG_IO is the main one people want. */ + + case SG_GET_VERSION_NUM: + case SG_SET_TIMEOUT: + case SG_GET_TIMEOUT: + case SG_GET_RESERVED_SIZE: + case SG_SET_RESERVED_SIZE: + case SG_EMULATED_HOST: + case SG_IO: + case SCSI_IOCTL_SEND_COMMAND: + return scsi_cmd_blk_ioctl(bdev, mode, cmd, argp); + + /* scsi_cmd_blk_ioctl would normally handle these, below, but */ + /* they aren't a good fit for cciss, as CD-ROMs are */ + /* not supported, and we don't have any bus/target/lun */ + /* which we present to the kernel. */ + + case CDROM_SEND_PACKET: + case CDROMCLOSETRAY: + case CDROMEJECT: + case SCSI_IOCTL_GET_IDLUN: + case SCSI_IOCTL_GET_BUS_NUMBER: + default: + return -ENOTTY; } } @@ -1245,7 +1777,7 @@ static void cciss_check_queues(ctlr_info_t *h) * in case the interrupt we serviced was from an ioctl and did not * free any new commands. */ - if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) + if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) return; /* We have room on the queue for more commands. Now we need to queue @@ -1257,14 +1789,17 @@ static void cciss_check_queues(ctlr_info_t *h) /* make sure the disk has been added and the drive is real * because this can be called from the middle of init_one. */ - if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads)) + if (!h->drv[curr_queue]) + continue; + if (!(h->drv[curr_queue]->queue) || + !(h->drv[curr_queue]->heads)) continue; blk_start_queue(h->gendisk[curr_queue]->queue); /* check to see if we have maxed out the number of commands * that can be placed on the queue. */ - if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) { + if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) { if (curr_queue == start_queue) { h->next_to_run = (start_queue + 1) % (h->highest_lun + 1); @@ -1273,153 +1808,467 @@ static void cciss_check_queues(ctlr_info_t *h) h->next_to_run = curr_queue; break; } - } else { - curr_queue = (curr_queue + 1) % (h->highest_lun + 1); } } } static void cciss_softirq_done(struct request *rq) { - CommandList_struct *cmd = rq->completion_data; - ctlr_info_t *h = hba[cmd->ctlr]; - unsigned long flags; + CommandList_struct *c = rq->completion_data; + ctlr_info_t *h = hba[c->ctlr]; + SGDescriptor_struct *curr_sg = c->SG; u64bit temp64; + unsigned long flags; int i, ddir; + int sg_index = 0; - if (cmd->Request.Type.Direction == XFER_READ) + if (c->Request.Type.Direction == XFER_READ) ddir = PCI_DMA_FROMDEVICE; else ddir = PCI_DMA_TODEVICE; /* command did not need to be retried */ /* unmap the DMA mapping for all the scatter gather elements */ - for (i = 0; i < cmd->Header.SGList; i++) { - temp64.val32.lower = cmd->SG[i].Addr.lower; - temp64.val32.upper = cmd->SG[i].Addr.upper; - pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir); + for (i = 0; i < c->Header.SGList; i++) { + if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) { + cciss_unmap_sg_chain_block(h, c); + /* Point to the next block */ + curr_sg = h->cmd_sg_list[c->cmdindex]; + sg_index = 0; + } + temp64.val32.lower = curr_sg[sg_index].Addr.lower; + temp64.val32.upper = curr_sg[sg_index].Addr.upper; + pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len, + ddir); + ++sg_index; } - complete_buffers(rq->bio, rq->errors); + dev_dbg(&h->pdev->dev, "Done with %p\n", rq); + + /* set the residual count for pc requests */ + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) + rq->resid_len = c->err_info->ResidualCnt; -#ifdef CCISS_DEBUG - printk("Done with %p\n", rq); -#endif /* CCISS_DEBUG */ + blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO); - add_disk_randomness(rq->rq_disk); spin_lock_irqsave(&h->lock, flags); - end_that_request_last(rq, rq->errors); - cmd_free(h, cmd, 1); + cmd_free(h, c); cciss_check_queues(h); spin_unlock_irqrestore(&h->lock, flags); } +static inline void log_unit_to_scsi3addr(ctlr_info_t *h, + unsigned char scsi3addr[], uint32_t log_unit) +{ + memcpy(scsi3addr, h->drv[log_unit]->LunID, + sizeof(h->drv[log_unit]->LunID)); +} + +/* This function gets the SCSI vendor, model, and revision of a logical drive + * via the inquiry page 0. Model, vendor, and rev are set to empty strings if + * they cannot be read. + */ +static void cciss_get_device_descr(ctlr_info_t *h, int logvol, + char *vendor, char *model, char *rev) +{ + int rc; + InquiryData_struct *inq_buf; + unsigned char scsi3addr[8]; + + *vendor = '\0'; + *model = '\0'; + *rev = '\0'; + + inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); + if (!inq_buf) + return; + + log_unit_to_scsi3addr(h, scsi3addr, logvol); + rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0, + scsi3addr, TYPE_CMD); + if (rc == IO_OK) { + memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN); + vendor[VENDOR_LEN] = '\0'; + memcpy(model, &inq_buf->data_byte[16], MODEL_LEN); + model[MODEL_LEN] = '\0'; + memcpy(rev, &inq_buf->data_byte[32], REV_LEN); + rev[REV_LEN] = '\0'; + } + + kfree(inq_buf); + return; +} + +/* This function gets the serial number of a logical drive via + * inquiry page 0x83. Serial no. is 16 bytes. If the serial + * number cannot be had, for whatever reason, 16 bytes of 0xff + * are returned instead. + */ +static void cciss_get_serial_no(ctlr_info_t *h, int logvol, + unsigned char *serial_no, int buflen) +{ +#define PAGE_83_INQ_BYTES 64 + int rc; + unsigned char *buf; + unsigned char scsi3addr[8]; + + if (buflen > 16) + buflen = 16; + memset(serial_no, 0xff, buflen); + buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL); + if (!buf) + return; + memset(serial_no, 0, buflen); + log_unit_to_scsi3addr(h, scsi3addr, logvol); + rc = sendcmd_withirq(h, CISS_INQUIRY, buf, + PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); + if (rc == IO_OK) + memcpy(serial_no, &buf[8], buflen); + kfree(buf); + return; +} + +/* + * cciss_add_disk sets up the block device queue for a logical drive + */ +static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, + int drv_index) +{ + disk->queue = blk_init_queue(do_cciss_request, &h->lock); + if (!disk->queue) + goto init_queue_failure; + sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); + disk->major = h->major; + disk->first_minor = drv_index << NWD_SHIFT; + disk->fops = &cciss_fops; + if (cciss_create_ld_sysfs_entry(h, drv_index)) + goto cleanup_queue; + disk->private_data = h->drv[drv_index]; + disk->driverfs_dev = &h->drv[drv_index]->dev; + + /* Set up queue information */ + blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); + + /* This is a hardware imposed limit. */ + blk_queue_max_segments(disk->queue, h->maxsgentries); + + blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors); + + blk_queue_softirq_done(disk->queue, cciss_softirq_done); + + disk->queue->queuedata = h; + + blk_queue_logical_block_size(disk->queue, + h->drv[drv_index]->block_size); + + /* Make sure all queue data is written out before */ + /* setting h->drv[drv_index]->queue, as setting this */ + /* allows the interrupt handler to start the queue */ + wmb(); + h->drv[drv_index]->queue = disk->queue; + add_disk(disk); + return 0; + +cleanup_queue: + blk_cleanup_queue(disk->queue); + disk->queue = NULL; +init_queue_failure: + return -1; +} + /* This function will check the usage_count of the drive to be updated/added. - * If the usage_count is zero then the drive information will be updated and - * the disk will be re-registered with the kernel. If not then it will be - * left alone for the next reboot. The exception to this is disk 0 which - * will always be left registered with the kernel since it is also the - * controller node. Any changes to disk 0 will show up on the next - * reboot. + * If the usage_count is zero and it is a heretofore unknown drive, or, + * the drive's capacity, geometry, or serial number has changed, + * then the drive information will be updated and the disk will be + * re-registered with the kernel. If these conditions don't hold, + * then it will be left alone for the next reboot. The exception to this + * is disk 0 which will always be left registered with the kernel since it + * is also the controller node. Any changes to disk 0 will show up on + * the next reboot. */ -static void cciss_update_drive_info(int ctlr, int drv_index) +static void cciss_update_drive_info(ctlr_info_t *h, int drv_index, + int first_time, int via_ioctl) { - ctlr_info_t *h = hba[ctlr]; struct gendisk *disk; - ReadCapdata_struct *size_buff = NULL; InquiryData_struct *inq_buff = NULL; unsigned int block_size; - unsigned int total_size; + sector_t total_size; unsigned long flags = 0; int ret = 0; - - /* if the disk already exists then deregister it before proceeding */ - if (h->drv[drv_index].raid_level != -1) { - spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); - h->drv[drv_index].busy_configuring = 1; - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - ret = deregister_disk(h->gendisk[drv_index], - &h->drv[drv_index], 0); - h->drv[drv_index].busy_configuring = 0; - } - - /* If the disk is in use return */ - if (ret) - return; + drive_info_struct *drvinfo; /* Get information about the disk and modify the driver structure */ - size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); - if (size_buff == NULL) - goto mem_msg; inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) + drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL); + if (inq_buff == NULL || drvinfo == NULL) goto mem_msg; - cciss_read_capacity(ctlr, drv_index, size_buff, 1, - &total_size, &block_size); - cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, - inq_buff, &h->drv[drv_index]); - - ++h->num_luns; - disk = h->gendisk[drv_index]; - set_capacity(disk, h->drv[drv_index].nr_blocks); + /* testing to see if 16-byte CDBs are already being used */ + if (h->cciss_read == CCISS_READ_16) { + cciss_read_capacity_16(h, drv_index, + &total_size, &block_size); - /* if it's the controller it's already added */ - if (drv_index) { - disk->queue = blk_init_queue(do_cciss_request, &h->lock); - - /* Set up queue information */ - disk->queue->backing_dev_info.ra_pages = READ_AHEAD; - blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); + } else { + cciss_read_capacity(h, drv_index, &total_size, &block_size); + /* if read_capacity returns all F's this volume is >2TB */ + /* in size so we switch to 16-byte CDB's for all */ + /* read/write ops */ + if (total_size == 0xFFFFFFFFULL) { + cciss_read_capacity_16(h, drv_index, + &total_size, &block_size); + h->cciss_read = CCISS_READ_16; + h->cciss_write = CCISS_WRITE_16; + } else { + h->cciss_read = CCISS_READ_10; + h->cciss_write = CCISS_WRITE_10; + } + } - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); + cciss_geometry_inquiry(h, drv_index, total_size, block_size, + inq_buff, drvinfo); + drvinfo->block_size = block_size; + drvinfo->nr_blocks = total_size + 1; + + cciss_get_device_descr(h, drv_index, drvinfo->vendor, + drvinfo->model, drvinfo->rev); + cciss_get_serial_no(h, drv_index, drvinfo->serial_no, + sizeof(drvinfo->serial_no)); + /* Save the lunid in case we deregister the disk, below. */ + memcpy(drvinfo->LunID, h->drv[drv_index]->LunID, + sizeof(drvinfo->LunID)); + + /* Is it the same disk we already know, and nothing's changed? */ + if (h->drv[drv_index]->raid_level != -1 && + ((memcmp(drvinfo->serial_no, + h->drv[drv_index]->serial_no, 16) == 0) && + drvinfo->block_size == h->drv[drv_index]->block_size && + drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks && + drvinfo->heads == h->drv[drv_index]->heads && + drvinfo->sectors == h->drv[drv_index]->sectors && + drvinfo->cylinders == h->drv[drv_index]->cylinders)) + /* The disk is unchanged, nothing to update */ + goto freeret; - blk_queue_max_sectors(disk->queue, 512); + /* If we get here it's not the same disk, or something's changed, + * so we need to * deregister it, and re-register it, if it's not + * in use. + * If the disk already exists then deregister it before proceeding + * (unless it's the first disk (for the controller node). + */ + if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) { + dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index); + spin_lock_irqsave(&h->lock, flags); + h->drv[drv_index]->busy_configuring = 1; + spin_unlock_irqrestore(&h->lock, flags); + + /* deregister_disk sets h->drv[drv_index]->queue = NULL + * which keeps the interrupt handler from starting + * the queue. + */ + ret = deregister_disk(h, drv_index, 0, via_ioctl); + } - blk_queue_softirq_done(disk->queue, cciss_softirq_done); + /* If the disk is in use return */ + if (ret) + goto freeret; - disk->queue->queuedata = hba[ctlr]; + /* Save the new information from cciss_geometry_inquiry + * and serial number inquiry. If the disk was deregistered + * above, then h->drv[drv_index] will be NULL. + */ + if (h->drv[drv_index] == NULL) { + drvinfo->device_initialized = 0; + h->drv[drv_index] = drvinfo; + drvinfo = NULL; /* so it won't be freed below. */ + } else { + /* special case for cxd0 */ + h->drv[drv_index]->block_size = drvinfo->block_size; + h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks; + h->drv[drv_index]->heads = drvinfo->heads; + h->drv[drv_index]->sectors = drvinfo->sectors; + h->drv[drv_index]->cylinders = drvinfo->cylinders; + h->drv[drv_index]->raid_level = drvinfo->raid_level; + memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16); + memcpy(h->drv[drv_index]->vendor, drvinfo->vendor, + VENDOR_LEN + 1); + memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1); + memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1); + } - blk_queue_hardsect_size(disk->queue, - hba[ctlr]->drv[drv_index].block_size); + ++h->num_luns; + disk = h->gendisk[drv_index]; + set_capacity(disk, h->drv[drv_index]->nr_blocks); - h->drv[drv_index].queue = disk->queue; - add_disk(disk); + /* If it's not disk 0 (drv_index != 0) + * or if it was disk 0, but there was previously + * no actual corresponding configured logical drive + * (raid_leve == -1) then we want to update the + * logical drive's information. + */ + if (drv_index || first_time) { + if (cciss_add_disk(h, disk, drv_index) != 0) { + cciss_free_gendisk(h, drv_index); + cciss_free_drive_info(h, drv_index); + dev_warn(&h->pdev->dev, "could not update disk %d\n", + drv_index); + --h->num_luns; + } } - freeret: - kfree(size_buff); +freeret: kfree(inq_buff); + kfree(drvinfo); return; - mem_msg: - printk(KERN_ERR "cciss: out of memory\n"); +mem_msg: + dev_err(&h->pdev->dev, "out of memory\n"); goto freeret; } /* This function will find the first index of the controllers drive array - * that has a -1 for the raid_level and will return that index. This is - * where new drives will be added. If the index to be returned is greater - * than the highest_lun index for the controller then highest_lun is set - * to this new index. If there are no available indexes then -1 is returned. + * that has a null drv pointer and allocate the drive info struct and + * will return that index This is where new drives will be added. + * If the index to be returned is greater than the highest_lun index for + * the controller then highest_lun is set * to this new index. + * If there are no available indexes or if tha allocation fails, then -1 + * is returned. * "controller_node" is used to know if this is a real + * logical drive, or just the controller node, which determines if this + * counts towards highest_lun. */ -static int cciss_find_free_drive_index(int ctlr) +static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node) { int i; + drive_info_struct *drv; + /* Search for an empty slot for our drive info */ for (i = 0; i < CISS_MAX_LUN; i++) { - if (hba[ctlr]->drv[i].raid_level == -1) { - if (i > hba[ctlr]->highest_lun) - hba[ctlr]->highest_lun = i; + + /* if not cxd0 case, and it's occupied, skip it. */ + if (h->drv[i] && i != 0) + continue; + /* + * If it's cxd0 case, and drv is alloc'ed already, and a + * disk is configured there, skip it. + */ + if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1) + continue; + + /* + * We've found an empty slot. Update highest_lun + * provided this isn't just the fake cxd0 controller node. + */ + if (i > h->highest_lun && !controller_node) + h->highest_lun = i; + + /* If adding a real disk at cxd0, and it's already alloc'ed */ + if (i == 0 && h->drv[i] != NULL) return i; + + /* + * Found an empty slot, not already alloc'ed. Allocate it. + * Mark it with raid_level == -1, so we know it's new later on. + */ + drv = kzalloc(sizeof(*drv), GFP_KERNEL); + if (!drv) + return -1; + drv->raid_level = -1; /* so we know it's new */ + h->drv[i] = drv; + return i; + } + return -1; +} + +static void cciss_free_drive_info(ctlr_info_t *h, int drv_index) +{ + kfree(h->drv[drv_index]); + h->drv[drv_index] = NULL; +} + +static void cciss_free_gendisk(ctlr_info_t *h, int drv_index) +{ + put_disk(h->gendisk[drv_index]); + h->gendisk[drv_index] = NULL; +} + +/* cciss_add_gendisk finds a free hba[]->drv structure + * and allocates a gendisk if needed, and sets the lunid + * in the drvinfo structure. It returns the index into + * the ->drv[] array, or -1 if none are free. + * is_controller_node indicates whether highest_lun should + * count this disk, or if it's only being added to provide + * a means to talk to the controller in case no logical + * drives have yet been configured. + */ +static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[], + int controller_node) +{ + int drv_index; + + drv_index = cciss_alloc_drive_info(h, controller_node); + if (drv_index == -1) + return -1; + + /*Check if the gendisk needs to be allocated */ + if (!h->gendisk[drv_index]) { + h->gendisk[drv_index] = + alloc_disk(1 << NWD_SHIFT); + if (!h->gendisk[drv_index]) { + dev_err(&h->pdev->dev, + "could not allocate a new disk %d\n", + drv_index); + goto err_free_drive_info; } } + memcpy(h->drv[drv_index]->LunID, lunid, + sizeof(h->drv[drv_index]->LunID)); + if (cciss_create_ld_sysfs_entry(h, drv_index)) + goto err_free_disk; + /* Don't need to mark this busy because nobody */ + /* else knows about this disk yet to contend */ + /* for access to it. */ + h->drv[drv_index]->busy_configuring = 0; + wmb(); + return drv_index; + +err_free_disk: + cciss_free_gendisk(h, drv_index); +err_free_drive_info: + cciss_free_drive_info(h, drv_index); return -1; } +/* This is for the special case of a controller which + * has no logical drives. In this case, we still need + * to register a disk so the controller can be accessed + * by the Array Config Utility. + */ +static void cciss_add_controller_node(ctlr_info_t *h) +{ + struct gendisk *disk; + int drv_index; + + if (h->gendisk[0] != NULL) /* already did this? Then bail. */ + return; + + drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1); + if (drv_index == -1) + goto error; + h->drv[drv_index]->block_size = 512; + h->drv[drv_index]->nr_blocks = 0; + h->drv[drv_index]->heads = 0; + h->drv[drv_index]->sectors = 0; + h->drv[drv_index]->cylinders = 0; + h->drv[drv_index]->raid_level = -1; + memset(h->drv[drv_index]->serial_no, 0, 16); + disk = h->gendisk[drv_index]; + if (cciss_add_disk(h, disk, drv_index) == 0) + return; + cciss_free_gendisk(h, drv_index); + cciss_free_drive_info(h, drv_index); +error: + dev_warn(&h->pdev->dev, "could not add disk 0.\n"); + return; +} + /* This function will add and remove logical drives from the Logical * drive array of the controller and maintain persistency of ordering * so that mount points are preserved until the next reboot. This allows @@ -1427,130 +2276,128 @@ static int cciss_find_free_drive_index(int ctlr) * without a re-ordering of those drives. * INPUT * h = The controller to perform the operations on - * del_disk = The disk to remove if specified. If the value given - * is NULL then no disk is removed. */ -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) +static int rebuild_lun_table(ctlr_info_t *h, int first_time, + int via_ioctl) { - int ctlr = h->ctlr; int num_luns; ReportLunData_struct *ld_buff = NULL; - drive_info_struct *drv = NULL; int return_code; int listlength = 0; int i; int drv_found; int drv_index = 0; - __u32 lunid = 0; + unsigned char lunid[8] = CTLR_LUNID; unsigned long flags; - /* Set busy_configuring flag for this operation */ - spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); - if (h->num_luns >= CISS_MAX_LUN) { - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - return -EINVAL; - } + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + /* Set busy_configuring flag for this operation */ + spin_lock_irqsave(&h->lock, flags); if (h->busy_configuring) { - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + spin_unlock_irqrestore(&h->lock, flags); return -EBUSY; } h->busy_configuring = 1; + spin_unlock_irqrestore(&h->lock, flags); + + ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); + if (ld_buff == NULL) + goto mem_msg; + + return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff, + sizeof(ReportLunData_struct), + 0, CTLR_LUNID, TYPE_CMD); + + if (return_code == IO_OK) + listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); + else { /* reading number of logical volumes failed */ + dev_warn(&h->pdev->dev, + "report logical volume command failed\n"); + listlength = 0; + goto freeret; + } + + num_luns = listlength / 8; /* 8 bytes per entry */ + if (num_luns > CISS_MAX_LUN) { + num_luns = CISS_MAX_LUN; + dev_warn(&h->pdev->dev, "more luns configured" + " on controller than can be handled by" + " this driver.\n"); + } - /* if del_disk is NULL then we are being called to add a new disk - * and update the logical drive table. If it is not NULL then - * we will check if the disk is in use or not. + if (num_luns == 0) + cciss_add_controller_node(h); + + /* Compare controller drive array to driver's drive array + * to see if any drives are missing on the controller due + * to action of Array Config Utility (user deletes drive) + * and deregister logical drives which have disappeared. */ - if (del_disk != NULL) { - drv = get_drv(del_disk); - drv->busy_configuring = 1; - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - return_code = deregister_disk(del_disk, drv, 1); - drv->busy_configuring = 0; - h->busy_configuring = 0; - return return_code; - } else { - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; + for (i = 0; i <= h->highest_lun; i++) { + int j; + drv_found = 0; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) - goto mem_msg; - - return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, - sizeof(ReportLunData_struct), 0, - 0, 0, TYPE_CMD); - - if (return_code == IO_OK) { - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[0])) - << 24; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[1])) - << 16; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[2])) - << 8; - listlength |= - 0xff & (unsigned int)(ld_buff->LUNListLength[3]); - } else { /* reading number of logical volumes failed */ - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - goto freeret; - } + /* skip holes in the array from already deleted drives */ + if (h->drv[i] == NULL) + continue; - num_luns = listlength / 8; /* 8 bytes per entry */ - if (num_luns > CISS_MAX_LUN) { - num_luns = CISS_MAX_LUN; - printk(KERN_WARNING "cciss: more luns configured" - " on controller than can be handled by" - " this driver.\n"); + for (j = 0; j < num_luns; j++) { + memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid)); + if (memcmp(h->drv[i]->LunID, lunid, + sizeof(lunid)) == 0) { + drv_found = 1; + break; + } } + if (!drv_found) { + /* Deregister it from the OS, it's gone. */ + spin_lock_irqsave(&h->lock, flags); + h->drv[i]->busy_configuring = 1; + spin_unlock_irqrestore(&h->lock, flags); + return_code = deregister_disk(h, i, 1, via_ioctl); + if (h->drv[i] != NULL) + h->drv[i]->busy_configuring = 0; + } + } - /* Compare controller drive array to drivers drive array. - * Check for updates in the drive information and any new drives - * on the controller. - */ - for (i = 0; i < num_luns; i++) { - int j; - - drv_found = 0; - - lunid = (0xff & - (unsigned int)(ld_buff->LUN[i][3])) << 24; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][2])) << 16; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][1])) << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); - - /* Find if the LUN is already in the drive array - * of the controller. If so then update its info - * if not is use. If it does not exist then find - * the first free index and add it. - */ - for (j = 0; j <= h->highest_lun; j++) { - if (h->drv[j].LunID == lunid) { - drv_index = j; - drv_found = 1; - } - } + /* Compare controller drive array to driver's drive array. + * Check for updates in the drive information and any new drives + * on the controller due to ACU adding logical drives, or changing + * a logical drive's size, etc. Reregister any new/changed drives + */ + for (i = 0; i < num_luns; i++) { + int j; - /* check if the drive was found already in the array */ - if (!drv_found) { - drv_index = cciss_find_free_drive_index(ctlr); - if (drv_index == -1) - goto freeret; + drv_found = 0; + memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid)); + /* Find if the LUN is already in the drive array + * of the driver. If so then update its info + * if not in use. If it does not exist then find + * the first free index and add it. + */ + for (j = 0; j <= h->highest_lun; j++) { + if (h->drv[j] != NULL && + memcmp(h->drv[j]->LunID, lunid, + sizeof(h->drv[j]->LunID)) == 0) { + drv_index = j; + drv_found = 1; + break; } - h->drv[drv_index].LunID = lunid; - cciss_update_drive_info(ctlr, drv_index); - } /* end for */ - } /* end else */ + } - freeret: + /* check if the drive was found already in the array */ + if (!drv_found) { + drv_index = cciss_add_gendisk(h, lunid, 0); + if (drv_index == -1) + goto freeret; + } + cciss_update_drive_info(h, drv_index, first_time, via_ioctl); + } /* end for */ + +freeret: kfree(ld_buff); h->busy_configuring = 0; /* We return -1 here to tell the ACU that we have registered/updated @@ -1558,11 +2405,31 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) * additional times. */ return -1; - mem_msg: - printk(KERN_ERR "cciss: out of memory\n"); +mem_msg: + dev_err(&h->pdev->dev, "out of memory\n"); + h->busy_configuring = 0; goto freeret; } +static void cciss_clear_drive_info(drive_info_struct *drive_info) +{ + /* zero out the disk size info */ + drive_info->nr_blocks = 0; + drive_info->block_size = 0; + drive_info->heads = 0; + drive_info->sectors = 0; + drive_info->cylinders = 0; + drive_info->raid_level = -1; + memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no)); + memset(drive_info->model, 0, sizeof(drive_info->model)); + memset(drive_info->rev, 0, sizeof(drive_info->rev)); + memset(drive_info->vendor, 0, sizeof(drive_info->vendor)); + /* + * don't clear the LUNID though, we need to remember which + * one this one is. + */ +} + /* This function will deregister the disk and it's queue from the * kernel. It must be called with the controller lock held and the * drv structures busy_configuring flag set. It's parameters are: @@ -1577,75 +2444,92 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) * the disk in preparation for re-adding it. In this case * the highest_lun should be left unchanged and the LunID * should not be cleared. + * via_ioctl + * This indicates whether we've reached this path via ioctl. + * This affects the maximum usage count allowed for c0d0 to be messed with. + * If this path is reached via ioctl(), then the max_usage_count will + * be 1, as the process calling ioctl() has got to have the device open. + * If we get here via sysfs, then the max usage count will be zero. */ -static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, - int clear_all) +static int deregister_disk(ctlr_info_t *h, int drv_index, + int clear_all, int via_ioctl) { - ctlr_info_t *h = get_host(disk); + int i; + struct gendisk *disk; + drive_info_struct *drv; + int recalculate_highest_lun; if (!capable(CAP_SYS_RAWIO)) return -EPERM; + drv = h->drv[drv_index]; + disk = h->gendisk[drv_index]; + /* make sure logical volume is NOT is use */ if (clear_all || (h->gendisk[0] == disk)) { - if (drv->usage_count > 1) + if (drv->usage_count > via_ioctl) return -EBUSY; } else if (drv->usage_count > 0) return -EBUSY; + recalculate_highest_lun = (drv == h->drv[h->highest_lun]); + /* invalidate the devices and deregister the disk. If it is disk * zero do not deregister it but just zero out it's values. This * allows us to delete disk zero but keep the controller registered. */ if (h->gendisk[0] != disk) { - if (disk) { - request_queue_t *q = disk->queue; - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - if (q) { - blk_cleanup_queue(q); - drv->queue = NULL; + struct request_queue *q = disk->queue; + if (disk->flags & GENHD_FL_UP) { + cciss_destroy_ld_sysfs_entry(h, drv_index, 0); + del_gendisk(disk); + } + if (q) + blk_cleanup_queue(q); + /* If clear_all is set then we are deleting the logical + * drive, not just refreshing its info. For drives + * other than disk 0 we will call put_disk. We do not + * do this for disk 0 as we need it to be able to + * configure the controller. + */ + if (clear_all){ + /* This isn't pretty, but we need to find the + * disk in our array and NULL our the pointer. + * This is so that we will call alloc_disk if + * this index is used again later. + */ + for (i=0; i < CISS_MAX_LUN; i++){ + if (h->gendisk[i] == disk) { + h->gendisk[i] = NULL; + break; + } } + put_disk(disk); } + } else { + set_capacity(disk, 0); + cciss_clear_drive_info(drv); } --h->num_luns; - /* zero out the disk size info */ - drv->nr_blocks = 0; - drv->block_size = 0; - drv->heads = 0; - drv->sectors = 0; - drv->cylinders = 0; - drv->raid_level = -1; /* This can be used as a flag variable to - * indicate that this element of the drive - * array is free. - */ - - if (clear_all) { - /* check to see if it was the last disk */ - if (drv == h->drv + h->highest_lun) { - /* if so, find the new hightest lun */ - int i, newhighest = -1; - for (i = 0; i < h->highest_lun; i++) { - /* if the disk has size > 0, it is available */ - if (h->drv[i].heads) - newhighest = i; - } - h->highest_lun = newhighest; - } - drv->LunID = 0; + /* if it was the last disk, find the new hightest lun */ + if (clear_all && recalculate_highest_lun) { + int newhighest = -1; + for (i = 0; i <= h->highest_lun; i++) { + /* if the disk has size > 0, it is available */ + if (h->drv[i] && h->drv[i]->heads) + newhighest = i; + } + h->highest_lun = newhighest; } return 0; } -static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, __u8 page_code, - unsigned char *scsi3addr, int cmd_type) +static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, + size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) { - ctlr_info_t *h = hba[ctlr]; u64bit buff_dma_handle; int status = IO_OK; @@ -1659,27 +2543,12 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Header.SGTotal = 0; } c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); c->Request.Type.Type = cmd_type; if (cmd_type == TYPE_CMD) { switch (cmd) { case CISS_INQUIRY: - /* If the logical unit number is 0 then, this is going - to controller so It's a physical command - mode = 0 target = 0. So we have nothing to write. - otherwise, if use_unit_num == 1, - mode = 1(volume set addressing) target = LUNID - otherwise, if use_unit_num == 2, - mode = 0(periph dev addr) target = scsi3addr */ - if (use_unit_num == 1) { - c->Header.LUN.LogDev.VolId = - h->drv[log_unit].LunID; - c->Header.LUN.LogDev.Mode = 1; - } else if (use_unit_num == 2) { - memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, - 8); - c->Header.LUN.LogDev.Mode = 0; - } /* are we trying to read a vital product page */ if (page_code != 0) { c->Request.CDB[1] = 0x01; @@ -1702,21 +2571,33 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.Type.Direction = XFER_READ; c->Request.Timeout = 0; c->Request.CDB[0] = cmd; - c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB + c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ c->Request.CDB[7] = (size >> 16) & 0xFF; c->Request.CDB[8] = (size >> 8) & 0xFF; c->Request.CDB[9] = size & 0xFF; break; case CCISS_READ_CAPACITY: - c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID; - c->Header.LUN.LogDev.Mode = 1; c->Request.CDBLen = 10; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_READ; c->Request.Timeout = 0; c->Request.CDB[0] = cmd; break; + case CCISS_READ_CAPACITY_16: + c->Request.CDBLen = 16; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + c->Request.CDB[1] = 0x10; + c->Request.CDB[10] = (size >> 24) & 0xFF; + c->Request.CDB[11] = (size >> 16) & 0xFF; + c->Request.CDB[12] = (size >> 8) & 0xFF; + c->Request.CDB[13] = size & 0xFF; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + break; case CCISS_CACHE_FLUSH: c->Request.CDBLen = 12; c->Request.Type.Attribute = ATTR_SIMPLE; @@ -1724,15 +2605,22 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.Timeout = 0; c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; + c->Request.CDB[7] = (size >> 8) & 0xFF; + c->Request.CDB[8] = size & 0xFF; + break; + case TEST_UNIT_READY: + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; break; default: - printk(KERN_WARNING - "cciss%d: Unknown Command 0x%c\n", ctlr, cmd); + dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd); return IO_ERROR; } } else if (cmd_type == TYPE_MSG) { switch (cmd) { - case 0: /* ABORT message */ + case CCISS_ABORT_MSG: c->Request.CDBLen = 12; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_WRITE; @@ -1742,15 +2630,16 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ /* buff contains the tag of the command to abort */ memcpy(&c->Request.CDB[4], buff, 8); break; - case 1: /* RESET message */ - c->Request.CDBLen = 12; + case CCISS_RESET_MSG: + c->Request.CDBLen = 16; c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; + c->Request.Type.Direction = XFER_NONE; c->Request.Timeout = 0; memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); c->Request.CDB[0] = cmd; /* reset */ - c->Request.CDB[1] = 0x04; /* reset a LUN */ - case 3: /* No-Op message */ + c->Request.CDB[1] = CCISS_RESET_TYPE_TARGET; + break; + case CCISS_NOOP_MSG: c->Request.CDBLen = 1; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_WRITE; @@ -1758,13 +2647,12 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.CDB[0] = cmd; break; default: - printk(KERN_WARNING - "cciss%d: unknown message type %d\n", ctlr, cmd); + dev_warn(&h->pdev->dev, + "unknown message type %d\n", cmd); return IO_ERROR; } } else { - printk(KERN_WARNING - "cciss%d: unknown command type %d\n", ctlr, cmd_type); + dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); return IO_ERROR; } /* Fill in the scatter gather information */ @@ -1780,193 +2668,279 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ return status; } -static int sendcmd_withirq(__u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int use_unit_num, - unsigned int log_unit, __u8 page_code, int cmd_type) +static int cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr, + u8 reset_type) { - ctlr_info_t *h = hba[ctlr]; CommandList_struct *c; - u64bit buff_dma_handle; - unsigned long flags; int return_status; - DECLARE_COMPLETION(wait); - if ((c = cmd_alloc(h, 0)) == NULL) + c = cmd_alloc(h); + if (!c) return -ENOMEM; - return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, NULL, cmd_type); + return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0, + CTLR_LUNID, TYPE_MSG); + c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ if (return_status != IO_OK) { - cmd_free(h, c, 0); + cmd_special_free(h, c); return return_status; } - resend_cmd2: - c->waiting = &wait; + c->waiting = NULL; + enqueue_cmd_and_start_io(h, c); + /* Don't wait for completion, the reset won't complete. Don't free + * the command either. This is the last command we will send before + * re-initializing everything, so it doesn't matter and won't leak. + */ + return 0; +} - /* Put the request on the tail of the queue and send it */ - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - addQ(&h->reqQ, c); - h->Qdepth++; - start_io(h); - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); +static int check_target_status(ctlr_info_t *h, CommandList_struct *c) +{ + switch (c->err_info->ScsiStatus) { + case SAM_STAT_GOOD: + return IO_OK; + case SAM_STAT_CHECK_CONDITION: + switch (0xf & c->err_info->SenseInfo[2]) { + case 0: return IO_OK; /* no sense */ + case 1: return IO_OK; /* recovered error */ + default: + if (check_for_unit_attention(h, c)) + return IO_NEEDS_RETRY; + dev_warn(&h->pdev->dev, "cmd 0x%02x " + "check condition, sense key = 0x%02x\n", + c->Request.CDB[0], c->err_info->SenseInfo[2]); + } + break; + default: + dev_warn(&h->pdev->dev, "cmd 0x%02x" + "scsi status = 0x%02x\n", + c->Request.CDB[0], c->err_info->ScsiStatus); + break; + } + return IO_ERROR; +} + +static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c) +{ + int return_status = IO_OK; + + if (c->err_info->CommandStatus == CMD_SUCCESS) + return IO_OK; + + switch (c->err_info->CommandStatus) { + case CMD_TARGET_STATUS: + return_status = check_target_status(h, c); + break; + case CMD_DATA_UNDERRUN: + case CMD_DATA_OVERRUN: + /* expected for inquiry and report lun commands */ + break; + case CMD_INVALID: + dev_warn(&h->pdev->dev, "cmd 0x%02x is " + "reported invalid\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cmd 0x%02x has " + "protocol error\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_HARDWARE_ERR: + dev_warn(&h->pdev->dev, "cmd 0x%02x had " + " hardware error\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_CONNECTION_LOST: + dev_warn(&h->pdev->dev, "cmd 0x%02x had " + "connection lost\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_ABORTED: + dev_warn(&h->pdev->dev, "cmd 0x%02x was " + "aborted\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_ABORT_FAILED: + dev_warn(&h->pdev->dev, "cmd 0x%02x reports " + "abort failed\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n", + c->Request.CDB[0]); + return_status = IO_NEEDS_RETRY; + break; + case CMD_UNABORTABLE: + dev_warn(&h->pdev->dev, "cmd unabortable\n"); + return_status = IO_ERROR; + break; + default: + dev_warn(&h->pdev->dev, "cmd 0x%02x returned " + "unknown status %x\n", c->Request.CDB[0], + c->err_info->CommandStatus); + return_status = IO_ERROR; + } + return return_status; +} + +static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, + int attempt_retry) +{ + DECLARE_COMPLETION_ONSTACK(wait); + u64bit buff_dma_handle; + int return_status = IO_OK; + +resend_cmd2: + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); wait_for_completion(&wait); - if (c->err_info->CommandStatus != 0) { /* an error has occurred */ - switch (c->err_info->CommandStatus) { - case CMD_TARGET_STATUS: - printk(KERN_WARNING "cciss: cmd %p has " - " completed with errors\n", c); - if (c->err_info->ScsiStatus) { - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status = %x\n", - c, c->err_info->ScsiStatus); - } + if (c->err_info->CommandStatus == 0 || !attempt_retry) + goto command_done; - break; - case CMD_DATA_UNDERRUN: - case CMD_DATA_OVERRUN: - /* expected for inquire and report lun commands */ - break; - case CMD_INVALID: - printk(KERN_WARNING "cciss: Cmd %p is " - "reported invalid\n", c); - return_status = IO_ERROR; - break; - case CMD_PROTOCOL_ERR: - printk(KERN_WARNING "cciss: cmd %p has " - "protocol error \n", c); - return_status = IO_ERROR; - break; - case CMD_HARDWARE_ERR: - printk(KERN_WARNING "cciss: cmd %p had " - " hardware error\n", c); - return_status = IO_ERROR; - break; - case CMD_CONNECTION_LOST: - printk(KERN_WARNING "cciss: cmd %p had " - "connection lost\n", c); - return_status = IO_ERROR; - break; - case CMD_ABORTED: - printk(KERN_WARNING "cciss: cmd %p was " - "aborted\n", c); - return_status = IO_ERROR; - break; - case CMD_ABORT_FAILED: - printk(KERN_WARNING "cciss: cmd %p reports " - "abort failed\n", c); - return_status = IO_ERROR; - break; - case CMD_UNSOLICITED_ABORT: - printk(KERN_WARNING - "cciss%d: unsolicited abort %p\n", ctlr, c); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying %p\n", ctlr, c); - c->retry_count++; - /* erase the old error information */ - memset(c->err_info, 0, - sizeof(ErrorInfo_struct)); - return_status = IO_OK; - INIT_COMPLETION(wait); - goto resend_cmd2; - } - return_status = IO_ERROR; - break; - default: - printk(KERN_WARNING "cciss: cmd %p returned " - "unknown status %x\n", c, - c->err_info->CommandStatus); - return_status = IO_ERROR; - } + return_status = process_sendcmd_error(h, c); + + if (return_status == IO_NEEDS_RETRY && + c->retry_count < MAX_CMD_RETRIES) { + dev_warn(&h->pdev->dev, "retrying 0x%02x\n", + c->Request.CDB[0]); + c->retry_count++; + /* erase the old error information */ + memset(c->err_info, 0, sizeof(ErrorInfo_struct)); + return_status = IO_OK; + reinit_completion(&wait); + goto resend_cmd2; } + +command_done: /* unlock the buffers from DMA */ buff_dma_handle.val32.lower = c->SG[0].Addr.lower; buff_dma_handle.val32.upper = c->SG[0].Addr.upper; pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); - cmd_free(h, c, 0); return return_status; } -static void cciss_geometry_inquiry(int ctlr, int logvol, - int withirq, unsigned int total_size, +static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size, + __u8 page_code, unsigned char scsi3addr[], + int cmd_type) +{ + CommandList_struct *c; + int return_status; + + c = cmd_special_alloc(h); + if (!c) + return -ENOMEM; + return_status = fill_cmd(h, c, cmd, buff, size, page_code, + scsi3addr, cmd_type); + if (return_status == IO_OK) + return_status = sendcmd_withirq_core(h, c, 1); + + cmd_special_free(h, c); + return return_status; +} + +static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol, + sector_t total_size, unsigned int block_size, InquiryData_struct *inq_buff, drive_info_struct *drv) { int return_code; + unsigned long t; + unsigned char scsi3addr[8]; + memset(inq_buff, 0, sizeof(InquiryData_struct)); - if (withirq) - return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, - inq_buff, sizeof(*inq_buff), 1, - logvol, 0xC1, TYPE_CMD); - else - return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff, - sizeof(*inq_buff), 1, logvol, 0xC1, NULL, - TYPE_CMD); + log_unit_to_scsi3addr(h, scsi3addr, logvol); + return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff, + sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD); if (return_code == IO_OK) { if (inq_buff->data_byte[8] == 0xFF) { - printk(KERN_WARNING - "cciss: reading geometry failed, volume " + dev_warn(&h->pdev->dev, + "reading geometry failed, volume " "does not support reading geometry\n"); - drv->block_size = block_size; - drv->nr_blocks = total_size; drv->heads = 255; - drv->sectors = 32; // Sectors per track - drv->cylinders = total_size / 255 / 32; + drv->sectors = 32; /* Sectors per track */ + drv->cylinders = total_size + 1; + drv->raid_level = RAID_UNKNOWN; } else { - unsigned int t; - - drv->block_size = block_size; - drv->nr_blocks = total_size; drv->heads = inq_buff->data_byte[6]; drv->sectors = inq_buff->data_byte[7]; drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8; drv->cylinders += inq_buff->data_byte[5]; drv->raid_level = inq_buff->data_byte[8]; - t = drv->heads * drv->sectors; - if (t > 1) { - drv->cylinders = total_size / t; - } + } + drv->block_size = block_size; + drv->nr_blocks = total_size + 1; + t = drv->heads * drv->sectors; + if (t > 1) { + sector_t real_size = total_size + 1; + unsigned long rem = sector_div(real_size, t); + if (rem) + real_size++; + drv->cylinders = real_size; } } else { /* Get geometry failed */ - printk(KERN_WARNING "cciss: reading geometry failed\n"); + dev_warn(&h->pdev->dev, "reading geometry failed\n"); } - printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n", - drv->heads, drv->sectors, drv->cylinders); } static void -cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, - int withirq, unsigned int *total_size, +cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size, unsigned int *block_size) { + ReadCapdata_struct *buf; int return_code; - memset(buf, 0, sizeof(*buf)); - if (withirq) - return_code = sendcmd_withirq(CCISS_READ_CAPACITY, - ctlr, buf, sizeof(*buf), 1, - logvol, 0, TYPE_CMD); - else - return_code = sendcmd(CCISS_READ_CAPACITY, - ctlr, buf, sizeof(*buf), 1, logvol, 0, - NULL, TYPE_CMD); + unsigned char scsi3addr[8]; + + buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); + if (!buf) { + dev_warn(&h->pdev->dev, "out of memory\n"); + return; + } + + log_unit_to_scsi3addr(h, scsi3addr, logvol); + return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf, + sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD); if (return_code == IO_OK) { - *total_size = - be32_to_cpu(*((__be32 *) & buf->total_size[0])) + 1; - *block_size = be32_to_cpu(*((__be32 *) & buf->block_size[0])); + *total_size = be32_to_cpu(*(__be32 *) buf->total_size); + *block_size = be32_to_cpu(*(__be32 *) buf->block_size); } else { /* read capacity command failed */ - printk(KERN_WARNING "cciss: read capacity failed\n"); + dev_warn(&h->pdev->dev, "read capacity failed\n"); *total_size = 0; *block_size = BLOCK_SIZE; } - printk(KERN_INFO " blocks= %u block_size= %d\n", - *total_size, *block_size); - return; + kfree(buf); +} + +static void cciss_read_capacity_16(ctlr_info_t *h, int logvol, + sector_t *total_size, unsigned int *block_size) +{ + ReadCapdata_struct_16 *buf; + int return_code; + unsigned char scsi3addr[8]; + + buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL); + if (!buf) { + dev_warn(&h->pdev->dev, "out of memory\n"); + return; + } + + log_unit_to_scsi3addr(h, scsi3addr, logvol); + return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16, + buf, sizeof(ReadCapdata_struct_16), + 0, scsi3addr, TYPE_CMD); + if (return_code == IO_OK) { + *total_size = be64_to_cpu(*(__be64 *) buf->total_size); + *block_size = be32_to_cpu(*(__be32 *) buf->block_size); + } else { /* read capacity command failed */ + dev_warn(&h->pdev->dev, "read capacity failed\n"); + *total_size = 0; + *block_size = BLOCK_SIZE; + } + dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n", + (unsigned long long)*total_size+1, *block_size); + kfree(buf); } static int cciss_revalidate(struct gendisk *disk) @@ -1976,12 +2950,14 @@ static int cciss_revalidate(struct gendisk *disk) int logvol; int FOUND = 0; unsigned int block_size; - unsigned int total_size; - ReadCapdata_struct *size_buff = NULL; + sector_t total_size; InquiryData_struct *inq_buff = NULL; - for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) { - if (h->drv[logvol].LunID == drv->LunID) { + for (logvol = 0; logvol <= h->highest_lun; logvol++) { + if (!h->drv[logvol]) + continue; + if (memcmp(h->drv[logvol]->LunID, drv->LunID, + sizeof(drv->LunID)) == 0) { FOUND = 1; break; } @@ -1990,259 +2966,29 @@ static int cciss_revalidate(struct gendisk *disk) if (!FOUND) return 1; - size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); - if (size_buff == NULL) { - printk(KERN_WARNING "cciss: out of memory\n"); - return 1; - } inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); if (inq_buff == NULL) { - printk(KERN_WARNING "cciss: out of memory\n"); - kfree(size_buff); + dev_warn(&h->pdev->dev, "out of memory\n"); return 1; } - - cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, - &block_size); - cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, + if (h->cciss_read == CCISS_READ_10) { + cciss_read_capacity(h, logvol, + &total_size, &block_size); + } else { + cciss_read_capacity_16(h, logvol, + &total_size, &block_size); + } + cciss_geometry_inquiry(h, logvol, total_size, block_size, inq_buff, drv); - blk_queue_hardsect_size(drv->queue, drv->block_size); + blk_queue_logical_block_size(drv->queue, drv->block_size); set_capacity(disk, drv->nr_blocks); - kfree(size_buff); kfree(inq_buff); return 0; } /* - * Wait polling for a command to complete. - * The memory mapped FIFO is polled for the completion. - * Used only at init time, interrupts from the HBA are disabled. - */ -static unsigned long pollcomplete(int ctlr) -{ - unsigned long done; - int i; - - /* Wait (up to 20 seconds) for a command to complete */ - - for (i = 20 * HZ; i > 0; i--) { - done = hba[ctlr]->access.command_completed(hba[ctlr]); - if (done == FIFO_EMPTY) - schedule_timeout_uninterruptible(1); - else - return done; - } - /* Invalid address to tell caller we ran out of time */ - return 1; -} - -static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) -{ - /* We get in here if sendcmd() is polling for completions - and gets some command back that it wasn't expecting -- - something other than that which it just sent down. - Ordinarily, that shouldn't happen, but it can happen when - the scsi tape stuff gets into error handling mode, and - starts using sendcmd() to try to abort commands and - reset tape drives. In that case, sendcmd may pick up - completions of commands that were sent to logical drives - through the block i/o system, or cciss ioctls completing, etc. - In that case, we need to save those completions for later - processing by the interrupt handler. - */ - -#ifdef CONFIG_CISS_SCSI_TAPE - struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects; - - /* If it's not the scsi tape stuff doing error handling, (abort */ - /* or reset) then we don't expect anything weird. */ - if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) { -#endif - printk(KERN_WARNING "cciss cciss%d: SendCmd " - "Invalid command list address returned! (%lx)\n", - ctlr, complete); - /* not much we can do. */ -#ifdef CONFIG_CISS_SCSI_TAPE - return 1; - } - - /* We've sent down an abort or reset, but something else - has completed */ - if (srl->ncompletions >= (NR_CMDS + 2)) { - /* Uh oh. No room to save it for later... */ - printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, " - "reject list overflow, command lost!\n", ctlr); - return 1; - } - /* Save it for later */ - srl->complete[srl->ncompletions] = complete; - srl->ncompletions++; -#endif - return 0; -} - -/* - * Send a command to the controller, and wait for it to complete. - * Only used at init time. - */ -static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, - __u8 page_code, unsigned char *scsi3addr, int cmd_type) -{ - CommandList_struct *c; - int i; - unsigned long complete; - ctlr_info_t *info_p = hba[ctlr]; - u64bit buff_dma_handle; - int status, done = 0; - - if ((c = cmd_alloc(info_p, 1)) == NULL) { - printk(KERN_WARNING "cciss: unable to get memory"); - return IO_ERROR; - } - status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, scsi3addr, cmd_type); - if (status != IO_OK) { - cmd_free(info_p, c, 1); - return status; - } - resend_cmd1: - /* - * Disable interrupt - */ -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: turning intr off\n"); -#endif /* CCISS_DEBUG */ - info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF); - - /* Make sure there is room in the command FIFO */ - /* Actually it should be completely empty at this time */ - /* unless we are in here doing error handling for the scsi */ - /* tape side of the driver. */ - for (i = 200000; i > 0; i--) { - /* if fifo isn't full go */ - if (!(info_p->access.fifo_full(info_p))) { - - break; - } - udelay(10); - printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," - " waiting!\n", ctlr); - } - /* - * Send the cmd - */ - info_p->access.submit_command(info_p, c); - done = 0; - do { - complete = pollcomplete(ctlr); - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: command completed\n"); -#endif /* CCISS_DEBUG */ - - if (complete == 1) { - printk(KERN_WARNING - "cciss cciss%d: SendCmd Timeout out, " - "No command list address returned!\n", ctlr); - status = IO_ERROR; - done = 1; - break; - } - - /* This will need to change for direct lookup completions */ - if ((complete & CISS_ERROR_BIT) - && (complete & ~CISS_ERROR_BIT) == c->busaddr) { - /* if data overrun or underun on Report command - ignore it - */ - if (((c->Request.CDB[0] == CISS_REPORT_LOG) || - (c->Request.CDB[0] == CISS_REPORT_PHYS) || - (c->Request.CDB[0] == CISS_INQUIRY)) && - ((c->err_info->CommandStatus == - CMD_DATA_OVERRUN) || - (c->err_info->CommandStatus == CMD_DATA_UNDERRUN) - )) { - complete = c->busaddr; - } else { - if (c->err_info->CommandStatus == - CMD_UNSOLICITED_ABORT) { - printk(KERN_WARNING "cciss%d: " - "unsolicited abort %p\n", - ctlr, c); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying %p\n", - ctlr, c); - c->retry_count++; - /* erase the old error */ - /* information */ - memset(c->err_info, 0, - sizeof - (ErrorInfo_struct)); - goto resend_cmd1; - } else { - printk(KERN_WARNING - "cciss%d: retried %p too " - "many times\n", ctlr, c); - status = IO_ERROR; - goto cleanup1; - } - } else if (c->err_info->CommandStatus == - CMD_UNABORTABLE) { - printk(KERN_WARNING - "cciss%d: command could not be aborted.\n", - ctlr); - status = IO_ERROR; - goto cleanup1; - } - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " Error %x \n", ctlr, - c->err_info->CommandStatus); - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " offensive info\n" - " size %x\n num %x value %x\n", - ctlr, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_size, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_num, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_value); - status = IO_ERROR; - goto cleanup1; - } - } - /* This will need changing for direct lookup completions */ - if (complete != c->busaddr) { - if (add_sendcmd_reject(cmd, ctlr, complete) != 0) { - BUG(); /* we are pretty much hosed if we get here. */ - } - continue; - } else - done = 1; - } while (!done); - - cleanup1: - /* unlock the data buffer from DMA */ - buff_dma_handle.val32.lower = c->SG[0].Addr.lower; - buff_dma_handle.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val, - c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); -#ifdef CONFIG_CISS_SCSI_TAPE - /* if we saved some commands for later, process them now. */ - if (info_p->scsi_rejects.ncompletions > 0) - do_cciss_intr(0, info_p, NULL); -#endif - cmd_free(info_p, c, 1); - return status; -} - -/* * Map (physical) PCI mem into (virtual) kernel space */ static void __iomem *remap_pci_mem(ulong base, ulong size) @@ -2262,26 +3008,27 @@ static void start_io(ctlr_info_t *h) { CommandList_struct *c; - while ((c = h->reqQ) != NULL) { + while (!list_empty(&h->reqQ)) { + c = list_entry(h->reqQ.next, CommandList_struct, list); /* can't do anything if fifo is full */ if ((h->access.fifo_full(h))) { - printk(KERN_WARNING "cciss: fifo full\n"); + dev_warn(&h->pdev->dev, "fifo full\n"); break; } /* Get the first entry from the Request Q */ - removeQ(&(h->reqQ), c); + removeQ(c); h->Qdepth--; /* Tell the controller execute command */ h->access.submit_command(h, c); /* Put job onto the completed Q */ - addQ(&(h->cmpQ), c); + addQ(&h->cmpQ, c); } } -/* Assumes that CCISS_LOCK(h->ctlr) is held. */ +/* Assumes that h->lock is held. */ /* Zeros out the error record and then resends the command back */ /* to the controller */ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) @@ -2290,7 +3037,7 @@ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) memset(c->err_info, 0, sizeof(ErrorInfo_struct)); /* add it to software queue and then send it to the controller */ - addQ(&(h->reqQ), c); + addQ(&h->reqQ, c); h->Qdepth++; if (h->Qdepth > h->maxQsinceinit) h->maxQsinceinit = h->Qdepth; @@ -2298,6 +3045,78 @@ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) start_io(h); } +static inline unsigned int make_status_bytes(unsigned int scsi_status_byte, + unsigned int msg_byte, unsigned int host_byte, + unsigned int driver_byte) +{ + /* inverse of macros in scsi.h */ + return (scsi_status_byte & 0xff) | + ((msg_byte & 0xff) << 8) | + ((host_byte & 0xff) << 16) | + ((driver_byte & 0xff) << 24); +} + +static inline int evaluate_target_status(ctlr_info_t *h, + CommandList_struct *cmd, int *retry_cmd) +{ + unsigned char sense_key; + unsigned char status_byte, msg_byte, host_byte, driver_byte; + int error_value; + + *retry_cmd = 0; + /* If we get in here, it means we got "target status", that is, scsi status */ + status_byte = cmd->err_info->ScsiStatus; + driver_byte = DRIVER_OK; + msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */ + + if (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) + host_byte = DID_PASSTHROUGH; + else + host_byte = DID_OK; + + error_value = make_status_bytes(status_byte, msg_byte, + host_byte, driver_byte); + + if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) { + if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) + dev_warn(&h->pdev->dev, "cmd %p " + "has SCSI Status 0x%x\n", + cmd, cmd->err_info->ScsiStatus); + return error_value; + } + + /* check the sense key */ + sense_key = 0xf & cmd->err_info->SenseInfo[2]; + /* no status or recovered error */ + if (((sense_key == 0x0) || (sense_key == 0x1)) && + (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)) + error_value = 0; + + if (check_for_unit_attention(h, cmd)) { + *retry_cmd = !(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC); + return 0; + } + + /* Not SG_IO or similar? */ + if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) { + if (error_value != 0) + dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION" + " sense key = 0x%x\n", cmd, sense_key); + return error_value; + } + + /* SG_IO or similar, copy sense data back */ + if (cmd->rq->sense) { + if (cmd->rq->sense_len > cmd->err_info->SenseLen) + cmd->rq->sense_len = cmd->err_info->SenseLen; + memcpy(cmd->rq->sense, cmd->err_info->SenseInfo, + cmd->rq->sense_len); + } else + cmd->rq->sense_len = 0; + + return error_value; +} + /* checks the status of the job and calls complete buffers to mark all * buffers for the completed job. Note that this function does not need * to hold the hba/queue lock. @@ -2305,145 +3124,196 @@ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd, int timeout) { - int status = 1; int retry_cmd = 0; + struct request *rq = cmd->rq; + + rq->errors = 0; if (timeout) - status = 0; - - if (cmd->err_info->CommandStatus != 0) { /* an error has occurred */ - switch (cmd->err_info->CommandStatus) { - unsigned char sense_key; - case CMD_TARGET_STATUS: - status = 0; - - if (cmd->err_info->ScsiStatus == 0x02) { - printk(KERN_WARNING "cciss: cmd %p " - "has CHECK CONDITION " - " byte 2 = 0x%x\n", cmd, - cmd->err_info->SenseInfo[2] - ); - /* check the sense key */ - sense_key = 0xf & cmd->err_info->SenseInfo[2]; - /* no status or recovered error */ - if ((sense_key == 0x0) || (sense_key == 0x1)) { - status = 1; - } - } else { - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status 0x%x\n", - cmd, cmd->err_info->ScsiStatus); - } - break; - case CMD_DATA_UNDERRUN: - printk(KERN_WARNING "cciss: cmd %p has" + rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT); + + if (cmd->err_info->CommandStatus == 0) /* no error has occurred */ + goto after_error_processing; + + switch (cmd->err_info->CommandStatus) { + case CMD_TARGET_STATUS: + rq->errors = evaluate_target_status(h, cmd, &retry_cmd); + break; + case CMD_DATA_UNDERRUN: + if (cmd->rq->cmd_type == REQ_TYPE_FS) { + dev_warn(&h->pdev->dev, "cmd %p has" " completed with data underrun " "reported\n", cmd); - break; - case CMD_DATA_OVERRUN: - printk(KERN_WARNING "cciss: cmd %p has" + cmd->rq->resid_len = cmd->err_info->ResidualCnt; + } + break; + case CMD_DATA_OVERRUN: + if (cmd->rq->cmd_type == REQ_TYPE_FS) + dev_warn(&h->pdev->dev, "cciss: cmd %p has" " completed with data overrun " "reported\n", cmd); - break; - case CMD_INVALID: - printk(KERN_WARNING "cciss: cmd %p is " - "reported invalid\n", cmd); - status = 0; - break; - case CMD_PROTOCOL_ERR: - printk(KERN_WARNING "cciss: cmd %p has " - "protocol error \n", cmd); - status = 0; - break; - case CMD_HARDWARE_ERR: - printk(KERN_WARNING "cciss: cmd %p had " - " hardware error\n", cmd); - status = 0; - break; - case CMD_CONNECTION_LOST: - printk(KERN_WARNING "cciss: cmd %p had " - "connection lost\n", cmd); - status = 0; - break; - case CMD_ABORTED: - printk(KERN_WARNING "cciss: cmd %p was " - "aborted\n", cmd); - status = 0; - break; - case CMD_ABORT_FAILED: - printk(KERN_WARNING "cciss: cmd %p reports " - "abort failed\n", cmd); - status = 0; - break; - case CMD_UNSOLICITED_ABORT: - printk(KERN_WARNING "cciss%d: unsolicited " - "abort %p\n", h->ctlr, cmd); - if (cmd->retry_count < MAX_CMD_RETRIES) { - retry_cmd = 1; - printk(KERN_WARNING - "cciss%d: retrying %p\n", h->ctlr, cmd); - cmd->retry_count++; - } else - printk(KERN_WARNING - "cciss%d: %p retried too " - "many times\n", h->ctlr, cmd); - status = 0; - break; - case CMD_TIMEOUT: - printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd); - status = 0; - break; - default: - printk(KERN_WARNING "cciss: cmd %p returned " - "unknown status %x\n", cmd, - cmd->err_info->CommandStatus); - status = 0; - } + break; + case CMD_INVALID: + dev_warn(&h->pdev->dev, "cciss: cmd %p is " + "reported invalid\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cciss: cmd %p has " + "protocol error\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_HARDWARE_ERR: + dev_warn(&h->pdev->dev, "cciss: cmd %p had " + " hardware error\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_CONNECTION_LOST: + dev_warn(&h->pdev->dev, "cciss: cmd %p had " + "connection lost\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_ABORTED: + dev_warn(&h->pdev->dev, "cciss: cmd %p was " + "aborted\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ABORT); + break; + case CMD_ABORT_FAILED: + dev_warn(&h->pdev->dev, "cciss: cmd %p reports " + "abort failed\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(&h->pdev->dev, "cciss%d: unsolicited " + "abort %p\n", h->ctlr, cmd); + if (cmd->retry_count < MAX_CMD_RETRIES) { + retry_cmd = 1; + dev_warn(&h->pdev->dev, "retrying %p\n", cmd); + cmd->retry_count++; + } else + dev_warn(&h->pdev->dev, + "%p retried too many times\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ABORT); + break; + case CMD_TIMEOUT: + dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); + break; + case CMD_UNABORTABLE: + dev_warn(&h->pdev->dev, "cmd %p unabortable\n", cmd); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC ? + DID_PASSTHROUGH : DID_ERROR); + break; + default: + dev_warn(&h->pdev->dev, "cmd %p returned " + "unknown status %x\n", cmd, + cmd->err_info->CommandStatus); + rq->errors = make_status_bytes(SAM_STAT_GOOD, + cmd->err_info->CommandStatus, DRIVER_OK, + (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ? + DID_PASSTHROUGH : DID_ERROR); } + +after_error_processing: + /* We need to return this command */ if (retry_cmd) { resend_cciss_cmd(h, cmd); return; } - cmd->rq->completion_data = cmd; - cmd->rq->errors = status; - blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE); blk_complete_request(cmd->rq); } +static inline u32 cciss_tag_contains_index(u32 tag) +{ +#define DIRECT_LOOKUP_BIT 0x10 + return tag & DIRECT_LOOKUP_BIT; +} + +static inline u32 cciss_tag_to_index(u32 tag) +{ +#define DIRECT_LOOKUP_SHIFT 5 + return tag >> DIRECT_LOOKUP_SHIFT; +} + +static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag) +{ +#define CCISS_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1) +#define CCISS_SIMPLE_ERROR_BITS 0x03 + if (likely(h->transMethod & CFGTBL_Trans_Performant)) + return tag & ~CCISS_PERF_ERROR_BITS; + return tag & ~CCISS_SIMPLE_ERROR_BITS; +} + +static inline void cciss_mark_tag_indexed(u32 *tag) +{ + *tag |= DIRECT_LOOKUP_BIT; +} + +static inline void cciss_set_tag_index(u32 *tag, u32 index) +{ + *tag |= (index << DIRECT_LOOKUP_SHIFT); +} + /* * Get a request and submit it to the controller. */ -static void do_cciss_request(request_queue_t *q) +static void do_cciss_request(struct request_queue *q) { ctlr_info_t *h = q->queuedata; CommandList_struct *c; - int start_blk, seg; + sector_t start_blk; + int seg; struct request *creq; u64bit temp64; - struct scatterlist tmp_sg[MAXSGENTRIES]; + struct scatterlist *tmp_sg; + SGDescriptor_struct *curr_sg; drive_info_struct *drv; int i, dir; - - /* We call start_io here in case there is a command waiting on the - * queue that has not been sent. - */ - if (blk_queue_plugged(q)) - goto startio; + int sg_index = 0; + int chained = 0; queue: - creq = elv_next_request(q); + creq = blk_peek_request(q); if (!creq) goto startio; - BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); + BUG_ON(creq->nr_phys_segments > h->maxsgentries); - if ((c = cmd_alloc(h, 1)) == NULL) + c = cmd_alloc(h); + if (!c) goto full; - blkdev_dequeue_request(creq); + blk_start_request(creq); + tmp_sg = h->scatter_list[c->cmdindex]; spin_unlock_irq(q->queue_lock); c->cmd_type = CMD_RWREQ; @@ -2451,28 +3321,25 @@ static void do_cciss_request(request_queue_t *q) /* fill in the request */ drv = creq->rq_disk->private_data; - c->Header.ReplyQueue = 0; // unused in simple mode + c->Header.ReplyQueue = 0; /* unused in simple mode */ /* got command from pool, so use the command block index instead */ /* for direct lookups. */ /* The first 2 bits are reserved for controller error reporting. */ - c->Header.Tag.lower = (c->cmdindex << 3); - c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */ - c->Header.LUN.LogDev.VolId = drv->LunID; - c->Header.LUN.LogDev.Mode = 1; - c->Request.CDBLen = 10; // 12 byte commands not in FW yet; - c->Request.Type.Type = TYPE_CMD; // It is a command. + cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex); + cciss_mark_tag_indexed(&c->Header.Tag.lower); + memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID)); + c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */ + c->Request.Type.Type = TYPE_CMD; /* It is a command. */ c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE; - c->Request.Timeout = 0; // Don't time out + c->Request.Timeout = 0; /* Don't time out */ c->Request.CDB[0] = - (rq_data_dir(creq) == READ) ? CCISS_READ : CCISS_WRITE; - start_blk = creq->sector; -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector, - (int)creq->nr_sectors); -#endif /* CCISS_DEBUG */ - + (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write; + start_blk = blk_rq_pos(creq); + dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n", + (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq)); + sg_init_table(tmp_sg, h->maxsgentries); seg = blk_rq_map_sg(q, creq, tmp_sg); /* get the DMA records for the setup */ @@ -2481,46 +3348,97 @@ static void do_cciss_request(request_queue_t *q) else dir = PCI_DMA_TODEVICE; + curr_sg = c->SG; + sg_index = 0; + chained = 0; + for (i = 0; i < seg; i++) { - c->SG[i].Len = tmp_sg[i].length; - temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page, - tmp_sg[i].offset, - tmp_sg[i].length, dir); - c->SG[i].Addr.lower = temp64.val32.lower; - c->SG[i].Addr.upper = temp64.val32.upper; - c->SG[i].Ext = 0; // we are not chaining + if (((sg_index+1) == (h->max_cmd_sgentries)) && + !chained && ((seg - i) > 1)) { + /* Point to next chain block. */ + curr_sg = h->cmd_sg_list[c->cmdindex]; + sg_index = 0; + chained = 1; + } + curr_sg[sg_index].Len = tmp_sg[i].length; + temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]), + tmp_sg[i].offset, + tmp_sg[i].length, dir); + curr_sg[sg_index].Addr.lower = temp64.val32.lower; + curr_sg[sg_index].Addr.upper = temp64.val32.upper; + curr_sg[sg_index].Ext = 0; /* we are not chaining */ + ++sg_index; } + if (chained) + cciss_map_sg_chain_block(h, c, h->cmd_sg_list[c->cmdindex], + (seg - (h->max_cmd_sgentries - 1)) * + sizeof(SGDescriptor_struct)); + /* track how many SG entries we are using */ if (seg > h->maxSG) h->maxSG = seg; -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", - creq->nr_sectors, seg); -#endif /* CCISS_DEBUG */ - - c->Header.SGList = c->Header.SGTotal = seg; - c->Request.CDB[1] = 0; - c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB - c->Request.CDB[3] = (start_blk >> 16) & 0xff; - c->Request.CDB[4] = (start_blk >> 8) & 0xff; - c->Request.CDB[5] = start_blk & 0xff; - c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB - c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff; - c->Request.CDB[8] = creq->nr_sectors & 0xff; - c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; + dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments " + "chained[%d]\n", + blk_rq_sectors(creq), seg, chained); + + c->Header.SGTotal = seg + chained; + if (seg <= h->max_cmd_sgentries) + c->Header.SGList = c->Header.SGTotal; + else + c->Header.SGList = h->max_cmd_sgentries; + set_performant_mode(h, c); + + if (likely(creq->cmd_type == REQ_TYPE_FS)) { + if(h->cciss_read == CCISS_READ_10) { + c->Request.CDB[1] = 0; + c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */ + c->Request.CDB[3] = (start_blk >> 16) & 0xff; + c->Request.CDB[4] = (start_blk >> 8) & 0xff; + c->Request.CDB[5] = start_blk & 0xff; + c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */ + c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff; + c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff; + c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; + } else { + u32 upper32 = upper_32_bits(start_blk); + + c->Request.CDBLen = 16; + c->Request.CDB[1]= 0; + c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */ + c->Request.CDB[3]= (upper32 >> 16) & 0xff; + c->Request.CDB[4]= (upper32 >> 8) & 0xff; + c->Request.CDB[5]= upper32 & 0xff; + c->Request.CDB[6]= (start_blk >> 24) & 0xff; + c->Request.CDB[7]= (start_blk >> 16) & 0xff; + c->Request.CDB[8]= (start_blk >> 8) & 0xff; + c->Request.CDB[9]= start_blk & 0xff; + c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff; + c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff; + c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff; + c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff; + c->Request.CDB[14] = c->Request.CDB[15] = 0; + } + } else if (creq->cmd_type == REQ_TYPE_BLOCK_PC) { + c->Request.CDBLen = creq->cmd_len; + memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB); + } else { + dev_warn(&h->pdev->dev, "bad request type %d\n", + creq->cmd_type); + BUG(); + } spin_lock_irq(q->queue_lock); - addQ(&(h->reqQ), c); + addQ(&h->reqQ, c); h->Qdepth++; if (h->Qdepth > h->maxQsinceinit) h->maxQsinceinit = h->Qdepth; goto queue; - full: +full: blk_stop_queue(q); - startio: +startio: /* We will already have the driver lock here so not need * to lock it. */ @@ -2529,152 +3447,411 @@ static void do_cciss_request(request_queue_t *q) static inline unsigned long get_next_completion(ctlr_info_t *h) { -#ifdef CONFIG_CISS_SCSI_TAPE - /* Any rejects from sendcmd() lying around? Process them first */ - if (h->scsi_rejects.ncompletions == 0) - return h->access.command_completed(h); - else { - struct sendcmd_reject_list *srl; - int n; - srl = &h->scsi_rejects; - n = --srl->ncompletions; - /* printk("cciss%d: processing saved reject\n", h->ctlr); */ - printk("p"); - return srl->complete[n]; - } -#else return h->access.command_completed(h); -#endif } static inline int interrupt_pending(ctlr_info_t *h) { -#ifdef CONFIG_CISS_SCSI_TAPE - return (h->access.intr_pending(h) - || (h->scsi_rejects.ncompletions > 0)); -#else return h->access.intr_pending(h); -#endif } static inline long interrupt_not_for_us(ctlr_info_t *h) { + return ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); +} + +static inline int bad_tag(ctlr_info_t *h, u32 tag_index, + u32 raw_tag) +{ + if (unlikely(tag_index >= h->nr_cmds)) { + dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); + return 1; + } + return 0; +} + +static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c, + u32 raw_tag) +{ + removeQ(c); + if (likely(c->cmd_type == CMD_RWREQ)) + complete_command(h, c, 0); + else if (c->cmd_type == CMD_IOCTL_PEND) + complete(c->waiting); #ifdef CONFIG_CISS_SCSI_TAPE - return (((h->access.intr_pending(h) == 0) || - (h->interrupts_enabled == 0)) - && (h->scsi_rejects.ncompletions == 0)); -#else - return (((h->access.intr_pending(h) == 0) || - (h->interrupts_enabled == 0))); + else if (c->cmd_type == CMD_SCSI) + complete_scsi_command(c, 0, raw_tag); #endif } -static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs) +static inline u32 next_command(ctlr_info_t *h) { - ctlr_info_t *h = dev_id; + u32 a; + + if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant))) + return h->access.command_completed(h); + + if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { + a = *(h->reply_pool_head); /* Next cmd in ring buffer */ + (h->reply_pool_head)++; + h->commands_outstanding--; + } else { + a = FIFO_EMPTY; + } + /* Check for wraparound */ + if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { + h->reply_pool_head = h->reply_pool; + h->reply_pool_wraparound ^= 1; + } + return a; +} + +/* process completion of an indexed ("direct lookup") command */ +static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag) +{ + u32 tag_index; CommandList_struct *c; + + tag_index = cciss_tag_to_index(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return next_command(h); + c = h->cmd_pool + tag_index; + finish_cmd(h, c, raw_tag); + return next_command(h); +} + +/* process completion of a non-indexed command */ +static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag) +{ + CommandList_struct *c = NULL; + __u32 busaddr_masked, tag_masked; + + tag_masked = cciss_tag_discard_error_bits(h, raw_tag); + list_for_each_entry(c, &h->cmpQ, list) { + busaddr_masked = cciss_tag_discard_error_bits(h, c->busaddr); + if (busaddr_masked == tag_masked) { + finish_cmd(h, c, raw_tag); + return next_command(h); + } + } + bad_tag(h, h->nr_cmds + 1, raw_tag); + return next_command(h); +} + +/* Some controllers, like p400, will give us one interrupt + * after a soft reset, even if we turned interrupts off. + * Only need to check for this in the cciss_xxx_discard_completions + * functions. + */ +static int ignore_bogus_interrupt(ctlr_info_t *h) +{ + if (likely(!reset_devices)) + return 0; + + if (likely(h->interrupts_enabled)) + return 0; + + dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled " + "(known firmware bug.) Ignoring.\n"); + + return 1; +} + +static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; unsigned long flags; - __u32 a, a1, a2; + u32 raw_tag; + + if (ignore_bogus_interrupt(h)) + return IRQ_NONE; if (interrupt_not_for_us(h)) return IRQ_NONE; - /* - * If there are completed commands in the completion queue, - * we had better do something about it. - */ - spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + spin_lock_irqsave(&h->lock, flags); while (interrupt_pending(h)) { - while ((a = get_next_completion(h)) != FIFO_EMPTY) { - a1 = a; - if ((a & 0x04)) { - a2 = (a >> 3); - if (a2 >= NR_CMDS) { - printk(KERN_WARNING - "cciss: controller cciss%d failed, stopping.\n", - h->ctlr); - fail_all_cmds(h->ctlr); - return IRQ_HANDLED; - } + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) + raw_tag = next_command(h); + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} - c = h->cmd_pool + a2; - a = c->busaddr; +static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; + unsigned long flags; + u32 raw_tag; - } else { - a &= ~3; - if ((c = h->cmpQ) == NULL) { - printk(KERN_WARNING - "cciss: Completion of %08x ignored\n", - a1); - continue; - } - while (c->busaddr != a) { - c = c->next; - if (c == h->cmpQ) - break; - } - } - /* - * If we've found the command, take it off the - * completion Q and free it - */ - if (c->busaddr == a) { - removeQ(&h->cmpQ, c); - if (c->cmd_type == CMD_RWREQ) { - complete_command(h, c, 0); - } else if (c->cmd_type == CMD_IOCTL_PEND) { - complete(c->waiting); - } -# ifdef CONFIG_CISS_SCSI_TAPE - else if (c->cmd_type == CMD_SCSI) - complete_scsi_command(c, 0, a1); -# endif - continue; - } + if (ignore_bogus_interrupt(h)) + return IRQ_NONE; + + spin_lock_irqsave(&h->lock, flags); + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) + raw_tag = next_command(h); + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t do_cciss_intx(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; + unsigned long flags; + u32 raw_tag; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) { + if (cciss_tag_contains_index(raw_tag)) + raw_tag = process_indexed_cmd(h, raw_tag); + else + raw_tag = process_nonindexed_cmd(h, raw_tag); } } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); +/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never + * check the interrupt pending register because it is not set. + */ +static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id) +{ + ctlr_info_t *h = dev_id; + unsigned long flags; + u32 raw_tag; + + spin_lock_irqsave(&h->lock, flags); + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) { + if (cciss_tag_contains_index(raw_tag)) + raw_tag = process_indexed_cmd(h, raw_tag); + else + raw_tag = process_nonindexed_cmd(h, raw_tag); + } + spin_unlock_irqrestore(&h->lock, flags); return IRQ_HANDLED; } +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&scan_mutex); + list_for_each_entry(test_h, &scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + reinit_completion(&h->scan_wait); + list_add_tail(&h->scan_list, &scan_q); + ret = 1; + } + mutex_unlock(&scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. The controller + * can be in one of three states: + * 1. Doesn't need a scan + * 2. On the scan list, but not scanning yet (we remove it) + * 3. Busy scanning (and not on the list). In this case we want to wait for + * the scan to complete to make sure the scanning thread for this + * controller is completely idle. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + + mutex_lock(&scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) { + if (test_h == h) { /* state 2. */ + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&scan_mutex); + return; + } + } + if (h->busy_scanning) { /* state 3. */ + mutex_unlock(&scan_mutex); + wait_for_completion(&h->scan_wait); + } else { /* state 1, nothing to do. */ + mutex_unlock(&scan_mutex); + } +} + +/** + * scan_thread() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ +static int scan_thread(void *data) +{ + struct ctlr_info *h; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) + break; + + while (1) { + mutex_lock(&scan_mutex); + if (list_empty(&scan_q)) { + mutex_unlock(&scan_mutex); + break; + } + + h = list_entry(scan_q.next, + struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&scan_mutex); + + rebuild_lun_table(h, 0, 0); + complete_all(&h->scan_wait); + mutex_lock(&scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&scan_mutex); + } + } + + return 0; +} + +static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c) +{ + if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) + return 0; + + switch (c->err_info->SenseInfo[12]) { + case STATE_CHANGED: + dev_warn(&h->pdev->dev, "a state change " + "detected, command retried\n"); + return 1; + break; + case LUN_FAILED: + dev_warn(&h->pdev->dev, "LUN failure " + "detected, action required\n"); + return 1; + break; + case REPORT_LUNS_CHANGED: + dev_warn(&h->pdev->dev, "report LUN data changed\n"); + /* + * Here, we could call add_to_scan_list and wake up the scan thread, + * except that it's quite likely that we will get more than one + * REPORT_LUNS_CHANGED condition in quick succession, which means + * that those which occur after the first one will likely happen + * *during* the scan_thread's rescan. And the rescan code is not + * robust enough to restart in the middle, undoing what it has already + * done, and it's not clear that it's even possible to do this, since + * part of what it does is notify the block layer, which starts + * doing it's own i/o to read partition tables and so on, and the + * driver doesn't have visibility to know what might need undoing. + * In any event, if possible, it is horribly complicated to get right + * so we just don't do it for now. + * + * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + */ + return 1; + break; + case POWER_OR_RESET: + dev_warn(&h->pdev->dev, + "a power on or device reset detected\n"); + return 1; + break; + case UNIT_ATTENTION_CLEARED: + dev_warn(&h->pdev->dev, + "unit attention cleared by another initiator\n"); + return 1; + break; + default: + dev_warn(&h->pdev->dev, "unknown unit attention detected\n"); + return 1; + } +} + /* * We cannot read the structure directly, for portability we must use * the io functions. * This is for debug only. */ -#ifdef CCISS_DEBUG -static void print_cfg_table(CfgTable_struct *tb) +static void print_cfg_table(ctlr_info_t *h) { int i; char temp_name[17]; + CfgTable_struct *tb = h->cfgtable; - printk("Controller Configuration information\n"); - printk("------------------------------------\n"); + dev_dbg(&h->pdev->dev, "Controller Configuration information\n"); + dev_dbg(&h->pdev->dev, "------------------------------------\n"); for (i = 0; i < 4; i++) temp_name[i] = readb(&(tb->Signature[i])); temp_name[4] = '\0'; - printk(" Signature = %s\n", temp_name); - printk(" Spec Number = %d\n", readl(&(tb->SpecValence))); - printk(" Transport methods supported = 0x%x\n", + dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name); + dev_dbg(&h->pdev->dev, " Spec Number = %d\n", + readl(&(tb->SpecValence))); + dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n", readl(&(tb->TransportSupport))); - printk(" Transport methods active = 0x%x\n", + dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n", readl(&(tb->TransportActive))); - printk(" Requested transport Method = 0x%x\n", + dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n", readl(&(tb->HostWrite.TransportRequest))); - printk(" Coalesce Interrupt Delay = 0x%x\n", + dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n", readl(&(tb->HostWrite.CoalIntDelay))); - printk(" Coalesce Interrupt Count = 0x%x\n", + dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n", readl(&(tb->HostWrite.CoalIntCount))); - printk(" Max outstanding commands = 0x%d\n", + dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%d\n", readl(&(tb->CmdsOutMax))); - printk(" Bus Types = 0x%x\n", readl(&(tb->BusTypes))); + dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n", + readl(&(tb->BusTypes))); for (i = 0; i < 16; i++) temp_name[i] = readb(&(tb->ServerName[i])); temp_name[16] = '\0'; - printk(" Server Name = %s\n", temp_name); - printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat))); + dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name); + dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n", + readl(&(tb->HeartBeat))); } -#endif /* CCISS_DEBUG */ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) { @@ -2698,7 +3875,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) offset += 8; break; default: /* reserved in PCI 2.2 */ - printk(KERN_WARNING + dev_warn(&pdev->dev, "Base address is invalid\n"); return -1; break; @@ -2710,12 +3887,186 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) return -1; } +/* Fill in bucket_map[], given nsgs (the max number of + * scatter gather elements supported) and bucket[], + * which is an array of 8 integers. The bucket[] array + * contains 8 different DMA transfer sizes (in 16 + * byte increments) which the controller uses to fetch + * commands. This function fills in bucket_map[], which + * maps a given number of scatter gather elements to one of + * the 8 DMA transfer sizes. The point of it is to allow the + * controller to only do as much DMA as needed to fetch the + * command, with the DMA transfer size encoded in the lower + * bits of the command address. + */ +static void calc_bucket_map(int bucket[], int num_buckets, + int nsgs, int *bucket_map) +{ + int i, j, b, size; + + /* even a command with 0 SGs requires 4 blocks */ +#define MINIMUM_TRANSFER_BLOCKS 4 +#define NUM_BUCKETS 8 + /* Note, bucket_map must have nsgs+1 entries. */ + for (i = 0; i <= nsgs; i++) { + /* Compute size of a command with i SG entries */ + size = i + MINIMUM_TRANSFER_BLOCKS; + b = num_buckets; /* Assume the biggest bucket */ + /* Find the bucket that is just big enough */ + for (j = 0; j < 8; j++) { + if (bucket[j] >= size) { + b = j; + break; + } + } + /* for a command with i SG entries, use bucket b. */ + bucket_map[i] = b; + } +} + +static void cciss_wait_for_mode_change_ack(ctlr_info_t *h) +{ + int i; + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + usleep_range(10000, 20000); + } +} + +static void cciss_enter_performant_mode(ctlr_info_t *h, u32 use_short_tags) +{ + /* This is a bit complicated. There are 8 registers on + * the controller which we write to to tell it 8 different + * sizes of commands which there may be. It's a way of + * reducing the DMA done to fetch each command. Encoded into + * each command's tag are 3 bits which communicate to the controller + * which of the eight sizes that command fits within. The size of + * each command depends on how many scatter gather entries there are. + * Each SG entry requires 16 bytes. The eight registers are programmed + * with the number of 16-byte blocks a command of that size requires. + * The smallest command possible requires 5 such 16 byte blocks. + * the largest command possible requires MAXSGENTRIES + 4 16-byte + * blocks. Note, this only extends to the SG entries contained + * within the command block, and does not extend to chained blocks + * of SG elements. bft[] contains the eight values we write to + * the registers. They are not evenly distributed, but have more + * sizes for small commands, and fewer sizes for larger commands. + */ + __u32 trans_offset; + int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4}; + /* + * 5 = 1 s/g entry or 4k + * 6 = 2 s/g entry or 8k + * 8 = 4 s/g entry or 16k + * 10 = 6 s/g entry or 24k + */ + unsigned long register_value; + BUILD_BUG_ON(28 > MAXSGENTRIES + 4); + + h->reply_pool_wraparound = 1; /* spec: init to 1 */ + + /* Controller spec: zero out this buffer. */ + memset(h->reply_pool, 0, h->max_commands * sizeof(__u64)); + h->reply_pool_head = h->reply_pool; + + trans_offset = readl(&(h->cfgtable->TransMethodOffset)); + calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries, + h->blockFetchTable); + writel(bft[0], &h->transtable->BlockFetch0); + writel(bft[1], &h->transtable->BlockFetch1); + writel(bft[2], &h->transtable->BlockFetch2); + writel(bft[3], &h->transtable->BlockFetch3); + writel(bft[4], &h->transtable->BlockFetch4); + writel(bft[5], &h->transtable->BlockFetch5); + writel(bft[6], &h->transtable->BlockFetch6); + writel(bft[7], &h->transtable->BlockFetch7); + + /* size of controller ring buffer */ + writel(h->max_commands, &h->transtable->RepQSize); + writel(1, &h->transtable->RepQCount); + writel(0, &h->transtable->RepQCtrAddrLow32); + writel(0, &h->transtable->RepQCtrAddrHigh32); + writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32); + writel(0, &h->transtable->RepQAddr0High32); + writel(CFGTBL_Trans_Performant | use_short_tags, + &(h->cfgtable->HostWrite.TransportRequest)); + + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + cciss_wait_for_mode_change_ack(h); + register_value = readl(&(h->cfgtable->TransportActive)); + if (!(register_value & CFGTBL_Trans_Performant)) + dev_warn(&h->pdev->dev, "cciss: unable to get board into" + " performant mode\n"); +} + +static void cciss_put_controller_into_performant_mode(ctlr_info_t *h) +{ + __u32 trans_support; + + if (cciss_simple_mode) + return; + + dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n"); + /* Attempt to put controller into performant mode if supported */ + /* Does board support performant mode? */ + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & PERFORMANT_MODE)) + return; + + dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n"); + /* Performant mode demands commands on a 32 byte boundary + * pci_alloc_consistent aligns on page boundarys already. + * Just need to check if divisible by 32 + */ + if ((sizeof(CommandList_struct) % 32) != 0) { + dev_warn(&h->pdev->dev, "%s %d %s\n", + "cciss info: command size[", + (int)sizeof(CommandList_struct), + "] not divisible by 32, no performant mode..\n"); + return; + } + + /* Performant mode ring buffer and supporting data structures */ + h->reply_pool = (__u64 *)pci_alloc_consistent( + h->pdev, h->max_commands * sizeof(__u64), + &(h->reply_pool_dhandle)); + + /* Need a block fetch table for performant mode */ + h->blockFetchTable = kmalloc(((h->maxsgentries+1) * + sizeof(__u32)), GFP_KERNEL); + + if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL)) + goto clean_up; + + cciss_enter_performant_mode(h, + trans_support & CFGTBL_Trans_use_short_tags); + + /* Change the access methods to the performant access methods */ + h->access = SA5_performant_access; + h->transMethod = CFGTBL_Trans_Performant; + + return; +clean_up: + kfree(h->blockFetchTable); + if (h->reply_pool) + pci_free_consistent(h->pdev, + h->max_commands * sizeof(__u64), + h->reply_pool, + h->reply_pool_dhandle); + return; + +} /* cciss_put_controller_into_performant_mode */ + /* If MSI/MSI-X is supported by the kernel we will try to enable it on * controllers that are capable. If not, we use IO-APIC mode. */ -static void __devinit cciss_interrupt_mode(ctlr_info_t *c, - struct pci_dev *pdev, __u32 board_id) +static void cciss_interrupt_mode(ctlr_info_t *h) { #ifdef CONFIG_PCI_MSI int err; @@ -2724,387 +4075,884 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c, }; /* Some boards advertise MSI but don't really support it */ - if ((board_id == 0x40700E11) || - (board_id == 0x40800E11) || - (board_id == 0x40820E11) || (board_id == 0x40830E11)) + if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) || + (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11)) goto default_int_mode; - if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { - err = pci_enable_msix(pdev, cciss_msix_entries, 4); + if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) { + err = pci_enable_msix_exact(h->pdev, cciss_msix_entries, 4); if (!err) { - c->intr[0] = cciss_msix_entries[0].vector; - c->intr[1] = cciss_msix_entries[1].vector; - c->intr[2] = cciss_msix_entries[2].vector; - c->intr[3] = cciss_msix_entries[3].vector; - c->msix_vector = 1; + h->intr[0] = cciss_msix_entries[0].vector; + h->intr[1] = cciss_msix_entries[1].vector; + h->intr[2] = cciss_msix_entries[2].vector; + h->intr[3] = cciss_msix_entries[3].vector; + h->msix_vector = 1; return; - } - if (err > 0) { - printk(KERN_WARNING "cciss: only %d MSI-X vectors " - "available\n", err); } else { - printk(KERN_WARNING "cciss: MSI-X init failed %d\n", - err); + dev_warn(&h->pdev->dev, + "MSI-X init failed %d\n", err); } } - if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { - if (!pci_enable_msi(pdev)) { - c->intr[SIMPLE_MODE_INT] = pdev->irq; - c->msi_vector = 1; - return; - } else { - printk(KERN_WARNING "cciss: MSI init failed\n"); - c->intr[SIMPLE_MODE_INT] = pdev->irq; - return; - } + if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) { + if (!pci_enable_msi(h->pdev)) + h->msi_vector = 1; + else + dev_warn(&h->pdev->dev, "MSI init failed\n"); } - default_int_mode: +default_int_mode: #endif /* CONFIG_PCI_MSI */ /* if we get here we're going to use the default interrupt mode */ - c->intr[SIMPLE_MODE_INT] = pdev->irq; + h->intr[h->intr_mode] = h->pdev->irq; return; } -static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) +static int cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id) { - ushort subsystem_vendor_id, subsystem_device_id, command; - __u32 board_id, scratchpad = 0; - __u64 cfg_offset; - __u32 cfg_base_addr; - __u64 cfg_base_addr_index; - int i, err; + int i; + u32 subsystem_vendor_id, subsystem_device_id; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + *board_id = ((subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id; + + for (i = 0; i < ARRAY_SIZE(products); i++) { + /* Stand aside for hpsa driver on request */ + if (cciss_allow_hpsa) + return -ENODEV; + if (*board_id == products[i].board_id) + return i; + } + dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n", + *board_id); + return -ENODEV; +} + +static inline bool cciss_board_disabled(ctlr_info_t *h) +{ + u16 command; + + (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command); + return ((command & PCI_COMMAND_MEMORY) == 0); +} + +static int cciss_pci_find_memory_BAR(struct pci_dev *pdev, + unsigned long *memory_bar) +{ + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { + /* addressing mode bits already removed */ + *memory_bar = pci_resource_start(pdev, i); + dev_dbg(&pdev->dev, "memory BAR = %lx\n", + *memory_bar); + return 0; + } + dev_warn(&pdev->dev, "no memory BAR found\n"); + return -ENODEV; +} + +static int cciss_wait_for_board_state(struct pci_dev *pdev, + void __iomem *vaddr, int wait_for_ready) +#define BOARD_READY 1 +#define BOARD_NOT_READY 0 +{ + int i, iterations; + u32 scratchpad; + + if (wait_for_ready) + iterations = CCISS_BOARD_READY_ITERATIONS; + else + iterations = CCISS_BOARD_NOT_READY_ITERATIONS; + + for (i = 0; i < iterations; i++) { + scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET); + if (wait_for_ready) { + if (scratchpad == CCISS_FIRMWARE_READY) + return 0; + } else { + if (scratchpad != CCISS_FIRMWARE_READY) + return 0; + } + msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS); + } + dev_warn(&pdev->dev, "board not ready, timed out.\n"); + return -ENODEV; +} + +static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr, + u32 *cfg_base_addr, u64 *cfg_base_addr_index, + u64 *cfg_offset) +{ + *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET); + *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET); + *cfg_base_addr &= (u32) 0x0000ffff; + *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr); + if (*cfg_base_addr_index == -1) { + dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, " + "*cfg_base_addr = 0x%08x\n", *cfg_base_addr); + return -ENODEV; + } + return 0; +} + +static int cciss_find_cfgtables(ctlr_info_t *h) +{ + u64 cfg_offset; + u32 cfg_base_addr; + u64 cfg_base_addr_index; + u32 trans_offset; + int rc; + + rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr, + &cfg_base_addr_index, &cfg_offset); + if (rc) + return rc; + h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev, + cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable)); + if (!h->cfgtable) + return -ENOMEM; + rc = write_driver_ver_to_cfgtable(h->cfgtable); + if (rc) + return rc; + /* Find performant mode table. */ + trans_offset = readl(&h->cfgtable->TransMethodOffset); + h->transtable = remap_pci_mem(pci_resource_start(h->pdev, + cfg_base_addr_index)+cfg_offset+trans_offset, + sizeof(*h->transtable)); + if (!h->transtable) + return -ENOMEM; + return 0; +} + +static void cciss_get_max_perf_mode_cmds(struct ctlr_info *h) +{ + h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); + + /* Limit commands in memory limited kdump scenario. */ + if (reset_devices && h->max_commands > 32) + h->max_commands = 32; + + if (h->max_commands < 16) { + dev_warn(&h->pdev->dev, "Controller reports " + "max supported commands of %d, an obvious lie. " + "Using 16. Ensure that firmware is up to date.\n", + h->max_commands); + h->max_commands = 16; + } +} - /* check to see if controller has been disabled */ - /* BEFORE trying to enable it */ - (void)pci_read_config_word(pdev, PCI_COMMAND, &command); - if (!(command & 0x02)) { - printk(KERN_WARNING - "cciss: controller appears to be disabled\n"); +/* Interrogate the hardware for some limits: + * max commands, max SG elements without chaining, and with chaining, + * SG chain block size, etc. + */ +static void cciss_find_board_params(ctlr_info_t *h) +{ + cciss_get_max_perf_mode_cmds(h); + h->nr_cmds = h->max_commands - 4 - cciss_tape_cmds; + h->maxsgentries = readl(&(h->cfgtable->MaxSGElements)); + /* + * The P600 may exhibit poor performnace under some workloads + * if we use the value in the configuration table. Limit this + * controller to MAXSGENTRIES (32) instead. + */ + if (h->board_id == 0x3225103C) + h->maxsgentries = MAXSGENTRIES; + /* + * Limit in-command s/g elements to 32 save dma'able memory. + * Howvever spec says if 0, use 31 + */ + h->max_cmd_sgentries = 31; + if (h->maxsgentries > 512) { + h->max_cmd_sgentries = 32; + h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1; + h->maxsgentries--; /* save one for chain pointer */ + } else { + h->maxsgentries = 31; /* default to traditional values */ + h->chainsize = 0; + } +} + +static inline bool CISS_signature_present(ctlr_info_t *h) +{ + if (!check_signature(h->cfgtable->Signature, "CISS", 4)) { + dev_warn(&h->pdev->dev, "not a valid CISS config table\n"); + return false; + } + return true; +} + +/* Need to enable prefetch in the SCSI core for 6400 in x86 */ +static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h) +{ +#ifdef CONFIG_X86 + u32 prefetch; + + prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); + prefetch |= 0x100; + writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); +#endif +} + +/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result + * in a prefetch beyond physical memory. + */ +static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h) +{ + u32 dma_prefetch; + __u32 dma_refetch; + + if (h->board_id != 0x3225103C) + return; + dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); + dma_prefetch |= 0x8000; + writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); + pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch); + dma_refetch |= 0x1; + pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch); +} + +static int cciss_pci_init(ctlr_info_t *h) +{ + int prod_index, err; + + prod_index = cciss_lookup_board_id(h->pdev, &h->board_id); + if (prod_index < 0) + return -ENODEV; + h->product_name = products[prod_index].product_name; + h->access = *(products[prod_index].access); + + if (cciss_board_disabled(h)) { + dev_warn(&h->pdev->dev, "controller appears to be disabled\n"); return -ENODEV; } - err = pci_enable_device(pdev); + pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | + PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); + + err = pci_enable_device(h->pdev); if (err) { - printk(KERN_ERR "cciss: Unable to Enable PCI device\n"); + dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n"); return err; } - err = pci_request_regions(pdev, "cciss"); + err = pci_request_regions(h->pdev, "cciss"); if (err) { - printk(KERN_ERR "cciss: Cannot obtain PCI resources, " - "aborting\n"); - goto err_out_disable_pdev; + dev_warn(&h->pdev->dev, + "Cannot obtain PCI resources, aborting\n"); + return err; } - subsystem_vendor_id = pdev->subsystem_vendor; - subsystem_device_id = pdev->subsystem_device; - board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | - subsystem_vendor_id); - -#ifdef CCISS_DEBUG - printk("command = %x\n", command); - printk("irq = %x\n", pdev->irq); - printk("board_id = %x\n", board_id); -#endif /* CCISS_DEBUG */ + dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq); + dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id); /* If the kernel supports MSI/MSI-X we will try to enable that functionality, * else we use the IO-APIC interrupt assigned to us by system ROM. */ - cciss_interrupt_mode(c, pdev, board_id); - - /* - * Memory base addr is first addr , the second points to the config - * table - */ - - c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */ -#ifdef CCISS_DEBUG - printk("address 0 = %x\n", c->paddr); -#endif /* CCISS_DEBUG */ - c->vaddr = remap_pci_mem(c->paddr, 200); - - /* Wait for the board to become ready. (PCI hotplug needs this.) - * We poll for up to 120 secs, once per 100ms. */ - for (i = 0; i < 1200; i++) { - scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET); - if (scratchpad == CCISS_FIRMWARE_READY) - break; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ / 10); /* wait 100ms */ - } - if (scratchpad != CCISS_FIRMWARE_READY) { - printk(KERN_WARNING "cciss: Board not ready. Timed out.\n"); - err = -ENODEV; + cciss_interrupt_mode(h); + err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr); + if (err) + goto err_out_free_res; + h->vaddr = remap_pci_mem(h->paddr, 0x250); + if (!h->vaddr) { + err = -ENOMEM; goto err_out_free_res; } + err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); + if (err) + goto err_out_free_res; + err = cciss_find_cfgtables(h); + if (err) + goto err_out_free_res; + print_cfg_table(h); + cciss_find_board_params(h); - /* get the address index number */ - cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET); - cfg_base_addr &= (__u32) 0x0000ffff; -#ifdef CCISS_DEBUG - printk("cfg base address = %x\n", cfg_base_addr); -#endif /* CCISS_DEBUG */ - cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); -#ifdef CCISS_DEBUG - printk("cfg base address index = %x\n", cfg_base_addr_index); -#endif /* CCISS_DEBUG */ - if (cfg_base_addr_index == -1) { - printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n"); + if (!CISS_signature_present(h)) { err = -ENODEV; goto err_out_free_res; } + cciss_enable_scsi_prefetch(h); + cciss_p600_dma_prefetch_quirk(h); + err = cciss_enter_simple_mode(h); + if (err) + goto err_out_free_res; + cciss_put_controller_into_performant_mode(h); + return 0; - cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); -#ifdef CCISS_DEBUG - printk("cfg offset = %x\n", cfg_offset); -#endif /* CCISS_DEBUG */ - c->cfgtable = remap_pci_mem(pci_resource_start(pdev, - cfg_base_addr_index) + - cfg_offset, sizeof(CfgTable_struct)); - c->board_id = board_id; +err_out_free_res: + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + if (h->transtable) + iounmap(h->transtable); + if (h->cfgtable) + iounmap(h->cfgtable); + if (h->vaddr) + iounmap(h->vaddr); + pci_release_regions(h->pdev); + return err; +} -#ifdef CCISS_DEBUG - print_cfg_table(c->cfgtable); -#endif /* CCISS_DEBUG */ +/* Function to find the first free pointer into our hba[] array + * Returns -1 if no free entries are left. + */ +static int alloc_cciss_hba(struct pci_dev *pdev) +{ + int i; - for (i = 0; i < ARRAY_SIZE(products); i++) { - if (board_id == products[i].board_id) { - c->product_name = products[i].product_name; - c->access = *(products[i].access); - break; + for (i = 0; i < MAX_CTLR; i++) { + if (!hba[i]) { + ctlr_info_t *h; + + h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); + if (!h) + goto Enomem; + hba[i] = h; + return i; } } - if (i == ARRAY_SIZE(products)) { - printk(KERN_WARNING "cciss: Sorry, I don't know how" - " to access the Smart Array controller %08lx\n", - (unsigned long)board_id); - err = -ENODEV; - goto err_out_free_res; + dev_warn(&pdev->dev, "This driver supports a maximum" + " of %d controllers.\n", MAX_CTLR); + return -1; +Enomem: + dev_warn(&pdev->dev, "out of memory.\n"); + return -1; +} + +static void free_hba(ctlr_info_t *h) +{ + int i; + + hba[h->ctlr] = NULL; + for (i = 0; i < h->highest_lun + 1; i++) + if (h->gendisk[i] != NULL) + put_disk(h->gendisk[i]); + kfree(h); +} + +/* Send a message CDB to the firmware. */ +static int cciss_message(struct pci_dev *pdev, unsigned char opcode, + unsigned char type) +{ + typedef struct { + CommandListHeader_struct CommandHeader; + RequestBlock_struct Request; + ErrDescriptor_struct ErrorDescriptor; + } Command; + static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); + Command *cmd; + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + CCISS commands, so they must be allocated from the lower 4GiB of + memory. */ + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + iounmap(vaddr); + return -ENOMEM; } - if ((readb(&c->cfgtable->Signature[0]) != 'C') || - (readb(&c->cfgtable->Signature[1]) != 'I') || - (readb(&c->cfgtable->Signature[2]) != 'S') || - (readb(&c->cfgtable->Signature[3]) != 'S')) { - printk("Does not appear to be a valid CISS config table\n"); - err = -ENODEV; - goto err_out_free_res; + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; } -#ifdef CONFIG_X86 - { - /* Need to enable prefetch in the SCSI core for 6400 in x86 */ - __u32 prefetch; - prefetch = readl(&(c->cfgtable->SCSI_Prefetch)); - prefetch |= 0x100; - writel(prefetch, &(c->cfgtable->SCSI_Prefetch)); + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + although there's no guarantee, we assume that the address is at + least 4-byte aligned (most likely, it's page-aligned). */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ + + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < 10; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if ((tag & ~3) == paddr32) + break; + msleep(CCISS_POST_RESET_NOOP_TIMEOUT_MSECS); } -#endif -#ifdef CCISS_DEBUG - printk("Trying to put board into Simple mode\n"); -#endif /* CCISS_DEBUG */ - c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); - /* Update the field, and then ring the doorbell */ - writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest)); - writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); + iounmap(vaddr); - /* under certain very rare conditions, this can take awhile. - * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right - * as we enter this code.) */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { - if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); + /* we leak the DMA buffer here ... no choice since the controller could + still complete the command. */ + if (i == 10) { + dev_err(&pdev->dev, + "controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; } -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "I counter got to %d %x\n", i, - readl(c->vaddr + SA5_DOORBELL)); -#endif /* CCISS_DEBUG */ -#ifdef CCISS_DEBUG - print_cfg_table(c->cfgtable); -#endif /* CCISS_DEBUG */ + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); - if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { - printk(KERN_WARNING "cciss: unable to get board into" - " simple mode\n"); - err = -ENODEV; - goto err_out_free_res; + if (tag & 2) { + dev_err(&pdev->dev, "controller message %02x:%02x failed\n", + opcode, type); + return -EIO; } + + dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", + opcode, type); return 0; +} - err_out_free_res: - pci_release_regions(pdev); +#define cciss_noop(p) cciss_message(p, 3, 0) - err_out_disable_pdev: - pci_disable_device(pdev); - return err; +static int cciss_controller_hard_reset(struct pci_dev *pdev, + void * __iomem vaddr, u32 use_doorbell) +{ + u16 pmcsr; + int pos; + + if (use_doorbell) { + /* For everything after the P600, the PCI power state method + * of resetting the controller doesn't work, so we have this + * other way using the doorbell register. + */ + dev_info(&pdev->dev, "using doorbell to reset controller\n"); + writel(use_doorbell, vaddr + SA5_DOORBELL); + } else { /* Try to do it the PCI power state way */ + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to D0, + * this causes a secondary PCI reset which will reset the + * controller." */ + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + dev_err(&pdev->dev, + "cciss_controller_hard_reset: " + "PCI PM not supported\n"); + return -ENODEV; + } + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + /* + * The P600 requires a small delay when changing states. + * Otherwise we may think the board did not reset and we bail. + * This for kdump only and is particular to the P600. + */ + msleep(500); + } + return 0; } -/* - * Gets information about the local volumes attached to the controller. - */ -static void cciss_getgeometry(int cntl_num) +static void init_driver_version(char *driver_version, int len) +{ + memset(driver_version, 0, len); + strncpy(driver_version, "cciss " DRIVER_NAME, len - 1); +} + +static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable) +{ + char *driver_version; + int i, size = sizeof(cfgtable->driver_version); + + driver_version = kmalloc(size, GFP_KERNEL); + if (!driver_version) + return -ENOMEM; + + init_driver_version(driver_version, size); + for (i = 0; i < size; i++) + writeb(driver_version[i], &cfgtable->driver_version[i]); + kfree(driver_version); + return 0; +} + +static void read_driver_ver_from_cfgtable(CfgTable_struct __iomem *cfgtable, + unsigned char *driver_ver) { - ReportLunData_struct *ld_buff; - ReadCapdata_struct *size_buff; - InquiryData_struct *inq_buff; - int return_code; int i; - int listlength = 0; - __u32 lunid = 0; - int block_size; - int total_size; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - return; + for (i = 0; i < sizeof(cfgtable->driver_version); i++) + driver_ver[i] = readb(&cfgtable->driver_version[i]); +} + +static int controller_reset_failed(CfgTable_struct __iomem *cfgtable) +{ + + char *driver_ver, *old_driver_ver; + int rc, size = sizeof(cfgtable->driver_version); + + old_driver_ver = kmalloc(2 * size, GFP_KERNEL); + if (!old_driver_ver) + return -ENOMEM; + driver_ver = old_driver_ver + size; + + /* After a reset, the 32 bytes of "driver version" in the cfgtable + * should have been changed, otherwise we know the reset failed. + */ + init_driver_version(old_driver_ver, size); + read_driver_ver_from_cfgtable(cfgtable, driver_ver); + rc = !memcmp(driver_ver, old_driver_ver, size); + kfree(old_driver_ver); + return rc; +} + +/* This does a hard reset of the controller using PCI power management + * states or using the doorbell register. */ +static int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) +{ + u64 cfg_offset; + u32 cfg_base_addr; + u64 cfg_base_addr_index; + void __iomem *vaddr; + unsigned long paddr; + u32 misc_fw_support; + int rc; + CfgTable_struct __iomem *cfgtable; + u32 use_doorbell; + u32 board_id; + u16 command_register; + + /* For controllers as old a the p600, this is very nearly + * the same thing as + * + * pci_save_state(pci_dev); + * pci_set_power_state(pci_dev, PCI_D3hot); + * pci_set_power_state(pci_dev, PCI_D0); + * pci_restore_state(pci_dev); + * + * For controllers newer than the P600, the pci power state + * method of resetting doesn't work so we have another way + * using the doorbell register. + */ + + /* Exclude 640x boards. These are two pci devices in one slot + * which share a battery backed cache module. One controls the + * cache, the other accesses the cache through the one that controls + * it. If we reset the one controlling the cache, the other will + * likely not be happy. Just forbid resetting this conjoined mess. + */ + cciss_lookup_board_id(pdev, &board_id); + if (!ctlr_is_resettable(board_id)) { + dev_warn(&pdev->dev, "Cannot reset Smart Array 640x " + "due to shared cache module."); + return -ENODEV; } - size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); - if (size_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - return; + + /* if controller is soft- but not hard resettable... */ + if (!ctlr_is_hard_resettable(board_id)) + return -ENOTSUPP; /* try soft reset later. */ + + /* Save the PCI command register */ + pci_read_config_word(pdev, 4, &command_register); + /* Turn the board off. This is so that later pci_restore_state() + * won't turn the board on before the rest of config space is ready. + */ + pci_disable_device(pdev); + pci_save_state(pdev); + + /* find the first memory BAR, so we can find the cfg table */ + rc = cciss_pci_find_memory_BAR(pdev, &paddr); + if (rc) + return rc; + vaddr = remap_pci_mem(paddr, 0x250); + if (!vaddr) + return -ENOMEM; + + /* find cfgtable in order to check if reset via doorbell is supported */ + rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr, + &cfg_base_addr_index, &cfg_offset); + if (rc) + goto unmap_vaddr; + cfgtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable)); + if (!cfgtable) { + rc = -ENOMEM; + goto unmap_vaddr; } - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - kfree(size_buff); - return; + rc = write_driver_ver_to_cfgtable(cfgtable); + if (rc) + goto unmap_vaddr; + + /* If reset via doorbell register is supported, use that. + * There are two such methods. Favor the newest method. + */ + misc_fw_support = readl(&cfgtable->misc_fw_support); + use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2; + if (use_doorbell) { + use_doorbell = DOORBELL_CTLR_RESET2; + } else { + use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; + if (use_doorbell) { + dev_warn(&pdev->dev, "Controller claims that " + "'Bit 2 doorbell reset' is " + "supported, but not 'bit 5 doorbell reset'. " + "Firmware update is recommended.\n"); + rc = -ENOTSUPP; /* use the soft reset */ + goto unmap_cfgtable; + } } - /* Get the firmware version */ - return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, - sizeof(InquiryData_struct), 0, 0, 0, NULL, - TYPE_CMD); - if (return_code == IO_OK) { - hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32]; - hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33]; - hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34]; - hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35]; - } else { /* send command failed */ - printk(KERN_WARNING "cciss: unable to determine firmware" - " version of controller\n"); + rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell); + if (rc) + goto unmap_cfgtable; + pci_restore_state(pdev); + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "failed to enable device.\n"); + goto unmap_cfgtable; + } + pci_write_config_word(pdev, 4, command_register); + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + msleep(CCISS_POST_RESET_PAUSE_MSECS); + + /* Wait for board to become not ready, then ready. */ + dev_info(&pdev->dev, "Waiting for board to reset.\n"); + rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY); + if (rc) { + dev_warn(&pdev->dev, "Failed waiting for board to hard reset." + " Will try soft reset.\n"); + rc = -ENOTSUPP; /* Not expected, but try soft reset later */ + goto unmap_cfgtable; + } + rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY); + if (rc) { + dev_warn(&pdev->dev, + "failed waiting for board to become ready " + "after hard reset\n"); + goto unmap_cfgtable; } - /* Get the number of logical volumes */ - return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff, - sizeof(ReportLunData_struct), 0, 0, 0, NULL, - TYPE_CMD); - if (return_code == IO_OK) { -#ifdef CCISS_DEBUG - printk("LUN Data\n--------------------------\n"); -#endif /* CCISS_DEBUG */ - - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; - listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); - } else { /* reading number of logical volumes failed */ - - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; + rc = controller_reset_failed(vaddr); + if (rc < 0) + goto unmap_cfgtable; + if (rc) { + dev_warn(&pdev->dev, "Unable to successfully hard reset " + "controller. Will try soft reset.\n"); + rc = -ENOTSUPP; /* Not expected, but try soft reset later */ + } else { + dev_info(&pdev->dev, "Board ready after hard reset.\n"); } - hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry - if (hba[cntl_num]->num_luns > CISS_MAX_LUN) { - printk(KERN_ERR - "ciss: only %d number of logical volumes supported\n", - CISS_MAX_LUN); - hba[cntl_num]->num_luns = CISS_MAX_LUN; - } -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", - ld_buff->LUNListLength[0], ld_buff->LUNListLength[1], - ld_buff->LUNListLength[2], ld_buff->LUNListLength[3], - hba[cntl_num]->num_luns); -#endif /* CCISS_DEBUG */ - - hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1; -// for(i=0; i< hba[cntl_num]->num_luns; i++) - for (i = 0; i < CISS_MAX_LUN; i++) { - if (i < hba[cntl_num]->num_luns) { - lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) - << 24; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) - << 16; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) - << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); - - hba[cntl_num]->drv[i].LunID = lunid; - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i, - ld_buff->LUN[i][0], ld_buff->LUN[i][1], - ld_buff->LUN[i][2], ld_buff->LUN[i][3], - hba[cntl_num]->drv[i].LunID); -#endif /* CCISS_DEBUG */ - cciss_read_capacity(cntl_num, i, size_buff, 0, - &total_size, &block_size); - cciss_geometry_inquiry(cntl_num, i, 0, total_size, - block_size, inq_buff, - &hba[cntl_num]->drv[i]); - } else { - /* initialize raid_level to indicate a free space */ - hba[cntl_num]->drv[i].raid_level = -1; - } + +unmap_cfgtable: + iounmap(cfgtable); + +unmap_vaddr: + iounmap(vaddr); + return rc; +} + +static int cciss_init_reset_devices(struct pci_dev *pdev) +{ + int rc, i; + + if (!reset_devices) + return 0; + + /* Reset the controller with a PCI power-cycle or via doorbell */ + rc = cciss_kdump_hard_reset_controller(pdev); + + /* -ENOTSUPP here means we cannot reset the controller + * but it's already (and still) up and running in + * "performant mode". Or, it might be 640x, which can't reset + * due to concerns about shared bbwc between 6402/6404 pair. + */ + if (rc == -ENOTSUPP) + return rc; /* just try to do the kdump anyhow. */ + if (rc) + return -ENODEV; + + /* Now try to get the controller to respond to a no-op */ + dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); + for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) { + if (cciss_noop(pdev) == 0) + break; + else + dev_warn(&pdev->dev, "no-op failed%s\n", + (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ? + "; re-trying" : "")); + msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS); } - kfree(ld_buff); - kfree(size_buff); - kfree(inq_buff); + return 0; } -/* Function to find the first free pointer into our hba[] array */ -/* Returns -1 if no free entries are left. */ -static int alloc_cciss_hba(void) +static int cciss_allocate_cmd_pool(ctlr_info_t *h) { - struct gendisk *disk[NWD]; - int i, n; - for (n = 0; n < NWD; n++) { - disk[n] = alloc_disk(1 << NWD_SHIFT); - if (!disk[n]) - goto out; + h->cmd_pool_bits = kmalloc(BITS_TO_LONGS(h->nr_cmds) * + sizeof(unsigned long), GFP_KERNEL); + h->cmd_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(CommandList_struct), + &(h->cmd_pool_dhandle)); + h->errinfo_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(ErrorInfo_struct), + &(h->errinfo_pool_dhandle)); + if ((h->cmd_pool_bits == NULL) + || (h->cmd_pool == NULL) + || (h->errinfo_pool == NULL)) { + dev_err(&h->pdev->dev, "out of memory"); + return -ENOMEM; } + return 0; +} - for (i = 0; i < MAX_CTLR; i++) { - if (!hba[i]) { - ctlr_info_t *p; - p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); - if (!p) - goto Enomem; - for (n = 0; n < NWD; n++) - p->gendisk[n] = disk[n]; - hba[i] = p; - return i; +static int cciss_allocate_scatterlists(ctlr_info_t *h) +{ + int i; + + /* zero it, so that on free we need not know how many were alloc'ed */ + h->scatter_list = kzalloc(h->max_commands * + sizeof(struct scatterlist *), GFP_KERNEL); + if (!h->scatter_list) + return -ENOMEM; + + for (i = 0; i < h->nr_cmds; i++) { + h->scatter_list[i] = kmalloc(sizeof(struct scatterlist) * + h->maxsgentries, GFP_KERNEL); + if (h->scatter_list[i] == NULL) { + dev_err(&h->pdev->dev, "could not allocate " + "s/g lists\n"); + return -ENOMEM; } } - printk(KERN_WARNING "cciss: This driver supports a maximum" - " of %d controllers.\n", MAX_CTLR); - goto out; - Enomem: - printk(KERN_ERR "cciss: out of memory.\n"); - out: - while (n--) - put_disk(disk[n]); + return 0; +} + +static void cciss_free_scatterlists(ctlr_info_t *h) +{ + int i; + + if (h->scatter_list) { + for (i = 0; i < h->nr_cmds; i++) + kfree(h->scatter_list[i]); + kfree(h->scatter_list); + } +} + +static void cciss_free_cmd_pool(ctlr_info_t *h) +{ + kfree(h->cmd_pool_bits); + if (h->cmd_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(CommandList_struct), + h->cmd_pool, h->cmd_pool_dhandle); + if (h->errinfo_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(ErrorInfo_struct), + h->errinfo_pool, h->errinfo_pool_dhandle); +} + +static int cciss_request_irq(ctlr_info_t *h, + irqreturn_t (*msixhandler)(int, void *), + irqreturn_t (*intxhandler)(int, void *)) +{ + if (h->msix_vector || h->msi_vector) { + if (!request_irq(h->intr[h->intr_mode], msixhandler, + 0, h->devname, h)) + return 0; + dev_err(&h->pdev->dev, "Unable to get msi irq %d" + " for %s\n", h->intr[h->intr_mode], + h->devname); + return -1; + } + + if (!request_irq(h->intr[h->intr_mode], intxhandler, + IRQF_SHARED, h->devname, h)) + return 0; + dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n", + h->intr[h->intr_mode], h->devname); return -1; } -static void free_hba(int i) +static int cciss_kdump_soft_reset(ctlr_info_t *h) { - ctlr_info_t *p = hba[i]; - int n; + if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) { + dev_warn(&h->pdev->dev, "Resetting array controller failed.\n"); + return -EIO; + } - hba[i] = NULL; - for (n = 0; n < NWD; n++) - put_disk(p->gendisk[n]); - kfree(p); + dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n"); + if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) { + dev_warn(&h->pdev->dev, "Soft reset had no effect.\n"); + return -1; + } + + dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n"); + if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) { + dev_warn(&h->pdev->dev, "Board failed to become ready " + "after soft reset.\n"); + return -1; + } + + return 0; +} + +static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h) +{ + int ctlr = h->ctlr; + + free_irq(h->intr[h->intr_mode], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ + cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); + cciss_free_scatterlists(h); + cciss_free_cmd_pool(h); + kfree(h->blockFetchTable); + if (h->reply_pool) + pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64), + h->reply_pool, h->reply_pool_dhandle); + if (h->transtable) + iounmap(h->transtable); + if (h->cfgtable) + iounmap(h->cfgtable); + if (h->vaddr) + iounmap(h->vaddr); + unregister_blkdev(h->major, h->devname); + cciss_destroy_hba_sysfs_entry(h); + pci_release_regions(h->pdev); + kfree(h); + hba[ctlr] = NULL; } /* @@ -3112,35 +4960,77 @@ static void free_hba(int i) * stealing all these major device numbers. * returns the number of block devices registered. */ -static int __devinit cciss_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int cciss_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - request_queue_t *q; int i; - int j; + int j = 0; int rc; - int dac; + int try_soft_reset = 0; + int dac, return_code; + InquiryData_struct *inq_buff; + ctlr_info_t *h; + unsigned long flags; + + /* + * By default the cciss driver is used for all older HP Smart Array + * controllers. There are module paramaters that allow a user to + * override this behavior and instead use the hpsa SCSI driver. If + * this is the case cciss may be loaded first from the kdump initrd + * image and cause a kernel panic. So if reset_devices is true and + * cciss_allow_hpsa is set just bail. + */ + if ((reset_devices) && (cciss_allow_hpsa == 1)) + return -ENODEV; + rc = cciss_init_reset_devices(pdev); + if (rc) { + if (rc != -ENOTSUPP) + return rc; + /* If the reset fails in a particular way (it has no way to do + * a proper hard reset, so returns -ENOTSUPP) we can try to do + * a soft reset once we get the controller configured up to the + * point that it can accept a command. + */ + try_soft_reset = 1; + rc = 0; + } - i = alloc_cciss_hba(); +reinit_after_soft_reset: + + i = alloc_cciss_hba(pdev); if (i < 0) - return -1; + return -ENOMEM; - hba[i]->busy_initializing = 1; + h = hba[i]; + h->pdev = pdev; + h->busy_initializing = 1; + h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; + INIT_LIST_HEAD(&h->cmpQ); + INIT_LIST_HEAD(&h->reqQ); + mutex_init(&h->busy_shutting_down); - if (cciss_pci_init(hba[i], pdev) != 0) - goto clean1; + if (cciss_pci_init(h) != 0) + goto clean_no_release_regions; + + sprintf(h->devname, "cciss%d", i); + h->ctlr = i; + + if (cciss_tape_cmds < 2) + cciss_tape_cmds = 2; + if (cciss_tape_cmds > 16) + cciss_tape_cmds = 16; + + init_completion(&h->scan_wait); - sprintf(hba[i]->devname, "cciss%d", i); - hba[i]->ctlr = i; - hba[i]->pdev = pdev; + if (cciss_create_hba_sysfs_entry(h)) + goto clean0; /* configure PCI DMA stuff */ - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) dac = 1; - else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) + else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) dac = 0; else { - printk(KERN_ERR "cciss: no suitable DMA available\n"); + dev_err(&h->pdev->dev, "no suitable DMA available\n"); goto clean1; } @@ -3150,224 +5040,294 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, * 8 controller support. */ if (i < MAX_CTLR_ORIG) - hba[i]->major = COMPAQ_CISS_MAJOR + i; - rc = register_blkdev(hba[i]->major, hba[i]->devname); + h->major = COMPAQ_CISS_MAJOR + i; + rc = register_blkdev(h->major, h->devname); if (rc == -EBUSY || rc == -EINVAL) { - printk(KERN_ERR - "cciss: Unable to get major number %d for %s " - "on hba %d\n", hba[i]->major, hba[i]->devname, i); + dev_err(&h->pdev->dev, + "Unable to get major number %d for %s " + "on hba %d\n", h->major, h->devname, i); goto clean1; } else { if (i >= MAX_CTLR_ORIG) - hba[i]->major = rc; + h->major = rc; } /* make sure the board interrupts are off */ - hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF); - if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr, - IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) { - printk(KERN_ERR "cciss: Unable to get irq %d for %s\n", - hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + rc = cciss_request_irq(h, do_cciss_msix_intr, do_cciss_intx); + if (rc) goto clean2; - } - printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", - hba[i]->devname, pdev->device, pci_name(pdev), - hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not"); - - hba[i]->cmd_pool_bits = - kmalloc(((NR_CMDS + BITS_PER_LONG - - 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); - hba[i]->cmd_pool = (CommandList_struct *) - pci_alloc_consistent(hba[i]->pdev, - NR_CMDS * sizeof(CommandList_struct), - &(hba[i]->cmd_pool_dhandle)); - hba[i]->errinfo_pool = (ErrorInfo_struct *) - pci_alloc_consistent(hba[i]->pdev, - NR_CMDS * sizeof(ErrorInfo_struct), - &(hba[i]->errinfo_pool_dhandle)); - if ((hba[i]->cmd_pool_bits == NULL) - || (hba[i]->cmd_pool == NULL) - || (hba[i]->errinfo_pool == NULL)) { - printk(KERN_ERR "cciss: out of memory"); + dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", + h->devname, pdev->device, pci_name(pdev), + h->intr[h->intr_mode], dac ? "" : " not"); + + if (cciss_allocate_cmd_pool(h)) goto clean4; - } -#ifdef CONFIG_CISS_SCSI_TAPE - hba[i]->scsi_rejects.complete = - kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) * - (NR_CMDS + 5), GFP_KERNEL); - if (hba[i]->scsi_rejects.complete == NULL) { - printk(KERN_ERR "cciss: out of memory"); + + if (cciss_allocate_scatterlists(h)) goto clean4; - } -#endif - spin_lock_init(&hba[i]->lock); + + h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h, + h->chainsize, h->nr_cmds); + if (!h->cmd_sg_list && h->chainsize > 0) + goto clean4; + + spin_lock_init(&h->lock); /* Initialize the pdev driver private data. - have it point to hba[i]. */ - pci_set_drvdata(pdev, hba[i]); + have it point to h. */ + pci_set_drvdata(pdev, h); /* command and error info recs zeroed out before they are used */ - memset(hba[i]->cmd_pool_bits, 0, - ((NR_CMDS + BITS_PER_LONG - - 1) / BITS_PER_LONG) * sizeof(unsigned long)); + bitmap_zero(h->cmd_pool_bits, h->nr_cmds); -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i); -#endif /* CCISS_DEBUG */ + h->num_luns = 0; + h->highest_lun = -1; + for (j = 0; j < CISS_MAX_LUN; j++) { + h->drv[j] = NULL; + h->gendisk[j] = NULL; + } - cciss_getgeometry(i); + /* At this point, the controller is ready to take commands. + * Now, if reset_devices and the hard reset didn't work, try + * the soft reset and see if that works. + */ + if (try_soft_reset) { + + /* This is kind of gross. We may or may not get a completion + * from the soft reset command, and if we do, then the value + * from the fifo may or may not be valid. So, we wait 10 secs + * after the reset throwing away any completions we get during + * that time. Unregister the interrupt handler and register + * fake ones to scoop up any residual completions. + */ + spin_lock_irqsave(&h->lock, flags); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + spin_unlock_irqrestore(&h->lock, flags); + free_irq(h->intr[h->intr_mode], h); + rc = cciss_request_irq(h, cciss_msix_discard_completions, + cciss_intx_discard_completions); + if (rc) { + dev_warn(&h->pdev->dev, "Failed to request_irq after " + "soft reset.\n"); + goto clean4; + } + + rc = cciss_kdump_soft_reset(h); + if (rc) { + dev_warn(&h->pdev->dev, "Soft reset failed.\n"); + goto clean4; + } - cciss_scsi_setup(i); + dev_info(&h->pdev->dev, "Board READY.\n"); + dev_info(&h->pdev->dev, + "Waiting for stale completions to drain.\n"); + h->access.set_intr_mask(h, CCISS_INTR_ON); + msleep(10000); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + + rc = controller_reset_failed(h->cfgtable); + if (rc) + dev_info(&h->pdev->dev, + "Soft reset appears to have failed.\n"); + + /* since the controller's reset, we have to go back and re-init + * everything. Easiest to just forget what we've done and do it + * all over again. + */ + cciss_undo_allocations_after_kdump_soft_reset(h); + try_soft_reset = 0; + if (rc) + /* don't go to clean4, we already unallocated */ + return -ENODEV; + + goto reinit_after_soft_reset; + } + + cciss_scsi_setup(h); /* Turn the interrupts on so we can service requests */ - hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); + h->access.set_intr_mask(h, CCISS_INTR_ON); - cciss_procinit(i); - hba[i]->busy_initializing = 0; + /* Get the firmware version */ + inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); + if (inq_buff == NULL) { + dev_err(&h->pdev->dev, "out of memory\n"); + goto clean4; + } - for (j = 0; j < NWD; j++) { /* mfm */ - drive_info_struct *drv = &(hba[i]->drv[j]); - struct gendisk *disk = hba[i]->gendisk[j]; + return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff, + sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD); + if (return_code == IO_OK) { + h->firm_ver[0] = inq_buff->data_byte[32]; + h->firm_ver[1] = inq_buff->data_byte[33]; + h->firm_ver[2] = inq_buff->data_byte[34]; + h->firm_ver[3] = inq_buff->data_byte[35]; + } else { /* send command failed */ + dev_warn(&h->pdev->dev, "unable to determine firmware" + " version of controller\n"); + } + kfree(inq_buff); - q = blk_init_queue(do_cciss_request, &hba[i]->lock); - if (!q) { - printk(KERN_ERR - "cciss: unable to allocate queue for disk %d\n", - j); - break; - } - drv->queue = q; + cciss_procinit(h); - q->backing_dev_info.ra_pages = READ_AHEAD; - blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); + h->cciss_max_sectors = 8192; - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(q, MAXSGENTRIES); + rebuild_lun_table(h, 1, 0); + cciss_engage_scsi(h); + h->busy_initializing = 0; + return 0; - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(q, MAXSGENTRIES); +clean4: + cciss_free_cmd_pool(h); + cciss_free_scatterlists(h); + cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); + free_irq(h->intr[h->intr_mode], h); +clean2: + unregister_blkdev(h->major, h->devname); +clean1: + cciss_destroy_hba_sysfs_entry(h); +clean0: + pci_release_regions(pdev); +clean_no_release_regions: + h->busy_initializing = 0; - blk_queue_max_sectors(q, 512); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_set_drvdata(pdev, NULL); + free_hba(h); + return -ENODEV; +} - blk_queue_softirq_done(q, cciss_softirq_done); +static void cciss_shutdown(struct pci_dev *pdev) +{ + ctlr_info_t *h; + char *flush_buf; + int return_code; - q->queuedata = hba[i]; - sprintf(disk->disk_name, "cciss/c%dd%d", i, j); - disk->major = hba[i]->major; - disk->first_minor = j << NWD_SHIFT; - disk->fops = &cciss_fops; - disk->queue = q; - disk->private_data = drv; - disk->driverfs_dev = &pdev->dev; - /* we must register the controller even if no disks exist */ - /* this is for the online array utilities */ - if (!drv->heads && j) - continue; - blk_queue_hardsect_size(q, drv->block_size); - set_capacity(disk, drv->nr_blocks); - add_disk(disk); + h = pci_get_drvdata(pdev); + flush_buf = kzalloc(4, GFP_KERNEL); + if (!flush_buf) { + dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n"); + return; } + /* write all data in the battery backed cache to disk */ + return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf, + 4, 0, CTLR_LUNID, TYPE_CMD); + kfree(flush_buf); + if (return_code != IO_OK) + dev_warn(&h->pdev->dev, "Error flushing cache\n"); + h->access.set_intr_mask(h, CCISS_INTR_OFF); + free_irq(h->intr[h->intr_mode], h); +} - return 1; - - clean4: -#ifdef CONFIG_CISS_SCSI_TAPE - kfree(hba[i]->scsi_rejects.complete); -#endif - kfree(hba[i]->cmd_pool_bits); - if (hba[i]->cmd_pool) - pci_free_consistent(hba[i]->pdev, - NR_CMDS * sizeof(CommandList_struct), - hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); - if (hba[i]->errinfo_pool) - pci_free_consistent(hba[i]->pdev, - NR_CMDS * sizeof(ErrorInfo_struct), - hba[i]->errinfo_pool, - hba[i]->errinfo_pool_dhandle); - free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); - clean2: - unregister_blkdev(hba[i]->major, hba[i]->devname); - clean1: - hba[i]->busy_initializing = 0; - free_hba(i); - return -1; +static int cciss_enter_simple_mode(struct ctlr_info *h) +{ + u32 trans_support; + + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & SIMPLE_MODE)) + return -ENOTSUPP; + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + cciss_wait_for_mode_change_ack(h); + print_cfg_table(h); + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&h->pdev->dev, "unable to get board into simple mode\n"); + return -ENODEV; + } + h->transMethod = CFGTBL_Trans_Simple; + return 0; } -static void __devexit cciss_remove_one(struct pci_dev *pdev) + +static void cciss_remove_one(struct pci_dev *pdev) { - ctlr_info_t *tmp_ptr; + ctlr_info_t *h; int i, j; - char flush_buf[4]; - int return_code; if (pci_get_drvdata(pdev) == NULL) { - printk(KERN_ERR "cciss: Unable to remove device \n"); + dev_err(&pdev->dev, "Unable to remove device\n"); return; } - tmp_ptr = pci_get_drvdata(pdev); - i = tmp_ptr->ctlr; + + h = pci_get_drvdata(pdev); + i = h->ctlr; if (hba[i] == NULL) { - printk(KERN_ERR "cciss: device appears to " - "already be removed \n"); + dev_err(&pdev->dev, "device appears to already be removed\n"); return; } - /* Turn board interrupts off and send the flush cache command */ - /* sendcmd will turn off interrupt, and send the flush... - * To write all data in the battery backed cache to disks */ - memset(flush_buf, 0, 4); - return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL, - TYPE_CMD); - if (return_code != IO_OK) { - printk(KERN_WARNING "Error Flushing cache on controller %d\n", - i); - } - free_irq(hba[i]->intr[2], hba[i]); -#ifdef CONFIG_PCI_MSI - if (hba[i]->msix_vector) - pci_disable_msix(hba[i]->pdev); - else if (hba[i]->msi_vector) - pci_disable_msi(hba[i]->pdev); -#endif /* CONFIG_PCI_MSI */ + mutex_lock(&h->busy_shutting_down); - iounmap(hba[i]->vaddr); - cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ - unregister_blkdev(hba[i]->major, hba[i]->devname); - remove_proc_entry(hba[i]->devname, proc_cciss); + remove_from_scan_list(h); + remove_proc_entry(h->devname, proc_cciss); + unregister_blkdev(h->major, h->devname); /* remove it from the disk list */ - for (j = 0; j < NWD; j++) { - struct gendisk *disk = hba[i]->gendisk[j]; + for (j = 0; j < CISS_MAX_LUN; j++) { + struct gendisk *disk = h->gendisk[j]; if (disk) { - request_queue_t *q = disk->queue; + struct request_queue *q = disk->queue; - if (disk->flags & GENHD_FL_UP) + if (disk->flags & GENHD_FL_UP) { + cciss_destroy_ld_sysfs_entry(h, j, 1); del_gendisk(disk); + } if (q) blk_cleanup_queue(q); } } - pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct), - hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); - pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct), - hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); - kfree(hba[i]->cmd_pool_bits); #ifdef CONFIG_CISS_SCSI_TAPE - kfree(hba[i]->scsi_rejects.complete); + cciss_unregister_scsi(h); /* unhook from SCSI subsystem */ #endif + + cciss_shutdown(pdev); + +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ + + iounmap(h->transtable); + iounmap(h->cfgtable); + iounmap(h->vaddr); + + cciss_free_cmd_pool(h); + /* Free up sg elements */ + for (j = 0; j < h->nr_cmds; j++) + kfree(h->scatter_list[j]); + kfree(h->scatter_list); + cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds); + kfree(h->blockFetchTable); + if (h->reply_pool) + pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64), + h->reply_pool, h->reply_pool_dhandle); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ pci_release_regions(pdev); - pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_hba(i); + cciss_destroy_hba_sysfs_entry(h); + mutex_unlock(&h->busy_shutting_down); + free_hba(h); } static struct pci_driver cciss_pci_driver = { .name = "cciss", .probe = cciss_init_one, - .remove = __devexit_p(cciss_remove_one), + .remove = cciss_remove_one, .id_table = cciss_pci_device_id, /* id_table */ + .shutdown = cciss_shutdown, }; /* @@ -3376,10 +5336,40 @@ static struct pci_driver cciss_pci_driver = { */ static int __init cciss_init(void) { + int err; + + /* + * The hardware requires that commands are aligned on a 64-bit + * boundary. Given that we use pci_alloc_consistent() to allocate an + * array of them, the size must be a multiple of 8 bytes. + */ + BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT); printk(KERN_INFO DRIVER_NAME "\n"); + err = bus_register(&cciss_bus_type); + if (err) + return err; + + /* Start the scan thread */ + cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan"); + if (IS_ERR(cciss_scan_thread)) { + err = PTR_ERR(cciss_scan_thread); + goto err_bus_unregister; + } + /* Register for our PCI devices */ - return pci_register_driver(&cciss_pci_driver); + err = pci_register_driver(&cciss_pci_driver); + if (err) + goto err_thread_stop; + + return err; + +err_thread_stop: + kthread_stop(cciss_scan_thread); +err_bus_unregister: + bus_unregister(&cciss_bus_type); + + return err; } static void __exit cciss_cleanup(void) @@ -3390,50 +5380,15 @@ static void __exit cciss_cleanup(void) /* double check that all controller entrys have been removed */ for (i = 0; i < MAX_CTLR; i++) { if (hba[i] != NULL) { - printk(KERN_WARNING "cciss: had to remove" - " controller %d\n", i); + dev_warn(&hba[i]->pdev->dev, + "had to remove controller\n"); cciss_remove_one(hba[i]->pdev); } } - remove_proc_entry("cciss", proc_root_driver); -} - -static void fail_all_cmds(unsigned long ctlr) -{ - /* If we get here, the board is apparently dead. */ - ctlr_info_t *h = hba[ctlr]; - CommandList_struct *c; - unsigned long flags; - - printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr); - h->alive = 0; /* the controller apparently died... */ - - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); - - pci_disable_device(h->pdev); /* Make sure it is really dead. */ - - /* move everything off the request queue onto the completed queue */ - while ((c = h->reqQ) != NULL) { - removeQ(&(h->reqQ), c); - h->Qdepth--; - addQ(&(h->cmpQ), c); - } - - /* Now, fail everything on the completed queue with a HW error */ - while ((c = h->cmpQ) != NULL) { - removeQ(&h->cmpQ, c); - c->err_info->CommandStatus = CMD_HARDWARE_ERR; - if (c->cmd_type == CMD_RWREQ) { - complete_command(h, c, 0); - } else if (c->cmd_type == CMD_IOCTL_PEND) - complete(c->waiting); -#ifdef CONFIG_CISS_SCSI_TAPE - else if (c->cmd_type == CMD_SCSI) - complete_scsi_command(c, 0, 0); -#endif - } - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - return; + kthread_stop(cciss_scan_thread); + if (proc_cciss) + remove_proc_entry("driver/cciss", NULL); + bus_unregister(&cciss_bus_type); } module_init(cciss_init); |