diff options
Diffstat (limited to 'drivers/base/power/runtime.c')
| -rw-r--r-- | drivers/base/power/runtime.c | 186 |
1 files changed, 179 insertions, 7 deletions
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 5bd4daa93ef..cd4e100a136 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -9,7 +9,6 @@ #include <linux/sched.h> #include <linux/pm_runtime.h> -#include <linux/jiffies.h> #include "power.h" static int rpm_resume(struct device *dev, int rpmflags); @@ -79,6 +78,53 @@ static void pm_runtime_cancel_pending(struct device *dev) dev->power.request = RPM_REQ_NONE; } +/* + * pm_runtime_autosuspend_expiration - Get a device's autosuspend-delay expiration time. + * @dev: Device to handle. + * + * Compute the autosuspend-delay expiration time based on the device's + * power.last_busy time. If the delay has already expired or is disabled + * (negative) or the power.use_autosuspend flag isn't set, return 0. + * Otherwise return the expiration time in jiffies (adjusted to be nonzero). + * + * This function may be called either with or without dev->power.lock held. + * Either way it can be racy, since power.last_busy may be updated at any time. + */ +unsigned long pm_runtime_autosuspend_expiration(struct device *dev) +{ + int autosuspend_delay; + long elapsed; + unsigned long last_busy; + unsigned long expires = 0; + + if (!dev->power.use_autosuspend) + goto out; + + autosuspend_delay = ACCESS_ONCE(dev->power.autosuspend_delay); + if (autosuspend_delay < 0) + goto out; + + last_busy = ACCESS_ONCE(dev->power.last_busy); + elapsed = jiffies - last_busy; + if (elapsed < 0) + goto out; /* jiffies has wrapped around. */ + + /* + * If the autosuspend_delay is >= 1 second, align the timer by rounding + * up to the nearest second. + */ + expires = last_busy + msecs_to_jiffies(autosuspend_delay); + if (autosuspend_delay >= 1000) + expires = round_jiffies(expires); + expires += !expires; + if (elapsed >= expires - last_busy) + expires = 0; /* Already expired. */ + + out: + return expires; +} +EXPORT_SYMBOL_GPL(pm_runtime_autosuspend_expiration); + /** * rpm_check_suspend_allowed - Test whether a device may be suspended. * @dev: Device to test. @@ -234,6 +280,32 @@ static int rpm_suspend(struct device *dev, int rpmflags) if (retval) goto out; + /* If the autosuspend_delay time hasn't expired yet, reschedule. */ + if ((rpmflags & RPM_AUTO) + && dev->power.runtime_status != RPM_SUSPENDING) { + unsigned long expires = pm_runtime_autosuspend_expiration(dev); + + if (expires != 0) { + /* Pending requests need to be canceled. */ + dev->power.request = RPM_REQ_NONE; + + /* + * Optimization: If the timer is already running and is + * set to expire at or before the autosuspend delay, + * avoid the overhead of resetting it. Just let it + * expire; pm_suspend_timer_fn() will take care of the + * rest. + */ + if (!(dev->power.timer_expires && time_before_eq( + dev->power.timer_expires, expires))) { + dev->power.timer_expires = expires; + mod_timer(&dev->power.suspend_timer, expires); + } + dev->power.timer_autosuspends = 1; + goto out; + } + } + /* Other scheduled or pending requests need to be canceled. */ pm_runtime_cancel_pending(dev); @@ -268,7 +340,8 @@ static int rpm_suspend(struct device *dev, int rpmflags) /* Carry out an asynchronous or a synchronous suspend. */ if (rpmflags & RPM_ASYNC) { - dev->power.request = RPM_REQ_SUSPEND; + dev->power.request = (rpmflags & RPM_AUTO) ? + RPM_REQ_AUTOSUSPEND : RPM_REQ_SUSPEND; if (!dev->power.request_pending) { dev->power.request_pending = true; queue_work(pm_wq, &dev->power.work); @@ -383,8 +456,15 @@ static int rpm_resume(struct device *dev, int rpmflags) if (retval) goto out; - /* Other scheduled or pending requests need to be canceled. */ - pm_runtime_cancel_pending(dev); + /* + * Other scheduled or pending requests need to be canceled. Small + * optimization: If an autosuspend timer is running, leave it running + * rather than cancelling it now only to restart it again in the near + * future. + */ + dev->power.request = RPM_REQ_NONE; + if (!dev->power.timer_autosuspends) + pm_runtime_deactivate_timer(dev); if (dev->power.runtime_status == RPM_ACTIVE) { retval = 1; @@ -568,6 +648,9 @@ static void pm_runtime_work(struct work_struct *work) case RPM_REQ_SUSPEND: rpm_suspend(dev, RPM_NOWAIT); break; + case RPM_REQ_AUTOSUSPEND: + rpm_suspend(dev, RPM_NOWAIT | RPM_AUTO); + break; case RPM_REQ_RESUME: rpm_resume(dev, RPM_NOWAIT); break; @@ -595,7 +678,8 @@ static void pm_suspend_timer_fn(unsigned long data) /* If 'expire' is after 'jiffies' we've been called too early. */ if (expires > 0 && !time_after(expires, jiffies)) { dev->power.timer_expires = 0; - rpm_suspend(dev, RPM_ASYNC); + rpm_suspend(dev, dev->power.timer_autosuspends ? + (RPM_ASYNC | RPM_AUTO) : RPM_ASYNC); } spin_unlock_irqrestore(&dev->power.lock, flags); @@ -627,6 +711,7 @@ int pm_schedule_suspend(struct device *dev, unsigned int delay) dev->power.timer_expires = jiffies + msecs_to_jiffies(delay); dev->power.timer_expires += !dev->power.timer_expires; + dev->power.timer_autosuspends = 0; mod_timer(&dev->power.suspend_timer, dev->power.timer_expires); out: @@ -670,7 +755,9 @@ EXPORT_SYMBOL_GPL(__pm_runtime_idle); * @dev: Device to suspend. * @rpmflags: Flag bits. * - * Carry out a suspend, either synchronous or asynchronous. + * If the RPM_GET_PUT flag is set, decrement the device's usage count and + * return immediately if it is larger than zero. Then carry out a suspend, + * either synchronous or asynchronous. * * This routine may be called in atomic context if the RPM_ASYNC flag is set. */ @@ -679,6 +766,11 @@ int __pm_runtime_suspend(struct device *dev, int rpmflags) unsigned long flags; int retval; + if (rpmflags & RPM_GET_PUT) { + if (!atomic_dec_and_test(&dev->power.usage_count)) + return 0; + } + spin_lock_irqsave(&dev->power.lock, flags); retval = rpm_suspend(dev, rpmflags); spin_unlock_irqrestore(&dev->power.lock, flags); @@ -980,7 +1072,7 @@ void pm_runtime_allow(struct device *dev) dev->power.runtime_auto = true; if (atomic_dec_and_test(&dev->power.usage_count)) - rpm_idle(dev, 0); + rpm_idle(dev, RPM_AUTO); out: spin_unlock_irq(&dev->power.lock); @@ -1007,6 +1099,86 @@ void pm_runtime_no_callbacks(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_no_callbacks); /** + * update_autosuspend - Handle a change to a device's autosuspend settings. + * @dev: Device to handle. + * @old_delay: The former autosuspend_delay value. + * @old_use: The former use_autosuspend value. + * + * Prevent runtime suspend if the new delay is negative and use_autosuspend is + * set; otherwise allow it. Send an idle notification if suspends are allowed. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static void update_autosuspend(struct device *dev, int old_delay, int old_use) +{ + int delay = dev->power.autosuspend_delay; + + /* Should runtime suspend be prevented now? */ + if (dev->power.use_autosuspend && delay < 0) { + + /* If it used to be allowed then prevent it. */ + if (!old_use || old_delay >= 0) { + atomic_inc(&dev->power.usage_count); + rpm_resume(dev, 0); + } + } + + /* Runtime suspend should be allowed now. */ + else { + + /* If it used to be prevented then allow it. */ + if (old_use && old_delay < 0) + atomic_dec(&dev->power.usage_count); + + /* Maybe we can autosuspend now. */ + rpm_idle(dev, RPM_AUTO); + } +} + +/** + * pm_runtime_set_autosuspend_delay - Set a device's autosuspend_delay value. + * @dev: Device to handle. + * @delay: Value of the new delay in milliseconds. + * + * Set the device's power.autosuspend_delay value. If it changes to negative + * and the power.use_autosuspend flag is set, prevent run-time suspends. If it + * changes the other way, allow run-time suspends. + */ +void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) +{ + int old_delay, old_use; + + spin_lock_irq(&dev->power.lock); + old_delay = dev->power.autosuspend_delay; + old_use = dev->power.use_autosuspend; + dev->power.autosuspend_delay = delay; + update_autosuspend(dev, old_delay, old_use); + spin_unlock_irq(&dev->power.lock); +} +EXPORT_SYMBOL_GPL(pm_runtime_set_autosuspend_delay); + +/** + * __pm_runtime_use_autosuspend - Set a device's use_autosuspend flag. + * @dev: Device to handle. + * @use: New value for use_autosuspend. + * + * Set the device's power.use_autosuspend flag, and allow or prevent run-time + * suspends as needed. + */ +void __pm_runtime_use_autosuspend(struct device *dev, bool use) +{ + int old_delay, old_use; + + spin_lock_irq(&dev->power.lock); + old_delay = dev->power.autosuspend_delay; + old_use = dev->power.use_autosuspend; + dev->power.use_autosuspend = use; + update_autosuspend(dev, old_delay, old_use); + spin_unlock_irq(&dev->power.lock); +} +EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend); + +/** * pm_runtime_init - Initialize run-time PM fields in given device object. * @dev: Device object to initialize. */ |