diff options
Diffstat (limited to 'drivers/ata/sata_inic162x.c')
| -rw-r--r-- | drivers/ata/sata_inic162x.c | 66 |
1 files changed, 31 insertions, 35 deletions
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 83a44471b18..069827826b2 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -6,6 +6,18 @@ * * This file is released under GPL v2. * + * **** WARNING **** + * + * This driver never worked properly and unfortunately data corruption is + * relatively common. There isn't anyone working on the driver and there's + * no support from the vendor. Do not use this driver in any production + * environment. + * + * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491 + * https://bugzilla.kernel.org/show_bug.cgi?id=60565 + * + * ***************** + * * This controller is eccentric and easily locks up if something isn't * right. Documentation is available at initio's website but it only * documents registers (not programming model). @@ -273,12 +285,10 @@ static void inic_reset_port(void __iomem *port_base) static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) { void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; - void __iomem *addr; if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) return -EINVAL; - addr = scr_addr + scr_map[sc_reg] * 4; *val = readl(scr_addr + scr_map[sc_reg] * 4); /* this controller has stuck DIAG.N, ignore it */ @@ -396,9 +406,8 @@ static void inic_host_intr(struct ata_port *ap) } spurious: - ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: " - "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", - qc ? qc->tf.command : 0xff, irq_stat, idma_stat); + ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", + qc ? qc->tf.command : 0xff, irq_stat, idma_stat); } static irqreturn_t inic_interrupt(int irq, void *dev_instance) @@ -619,8 +628,9 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, rc = sata_link_resume(link, timing, deadline); if (rc) { - ata_link_printk(link, KERN_WARNING, "failed to resume " - "link after reset (errno=%d)\n", rc); + ata_link_warn(link, + "failed to resume link after reset (errno=%d)\n", + rc); return rc; } @@ -632,8 +642,9 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, rc = ata_wait_after_reset(link, deadline, inic_check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { - ata_link_printk(link, KERN_WARNING, "device not ready " - "after hardreset (errno=%d)\n", rc); + ata_link_warn(link, + "device not ready after hardreset (errno=%d)\n", + rc); return rc; } @@ -774,10 +785,10 @@ static int init_controller(void __iomem *mmio_base, u16 hctl) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int inic_pci_device_resume(struct pci_dev *pdev) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); struct inic_host_priv *hpriv = host->private_data; int rc; @@ -799,7 +810,6 @@ static int inic_pci_device_resume(struct pci_dev *pdev) static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int printed_version; const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; struct ata_host *host; struct inic_host_priv *hpriv; @@ -807,8 +817,9 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) int mmio_bar; int i, rc; - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + ata_print_version_once(&pdev->dev, DRV_VERSION); + + dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n"); /* alloc host */ host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); @@ -847,15 +858,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Set dma_mask. This devices doesn't support 64bit addressing. */ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); + dev_err(&pdev->dev, "32-bit DMA enable failed\n"); return rc; } rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); + dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); return rc; } @@ -866,15 +875,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) */ rc = pci_set_dma_max_seg_size(pdev, 65536 - 512); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "failed to set the maximum segment size.\n"); + dev_err(&pdev->dev, "failed to set the maximum segment size\n"); return rc; } rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "failed to initialize controller\n"); + dev_err(&pdev->dev, "failed to initialize controller\n"); return rc; } @@ -891,7 +898,7 @@ static const struct pci_device_id inic_pci_tbl[] = { static struct pci_driver inic_pci_driver = { .name = DRV_NAME, .id_table = inic_pci_tbl, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, .resume = inic_pci_device_resume, #endif @@ -899,21 +906,10 @@ static struct pci_driver inic_pci_driver = { .remove = ata_pci_remove_one, }; -static int __init inic_init(void) -{ - return pci_register_driver(&inic_pci_driver); -} - -static void __exit inic_exit(void) -{ - pci_unregister_driver(&inic_pci_driver); -} +module_pci_driver(inic_pci_driver); MODULE_AUTHOR("Tejun Heo"); MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(pci, inic_pci_tbl); MODULE_VERSION(DRV_VERSION); - -module_init(inic_init); -module_exit(inic_exit); |