diff options
Diffstat (limited to 'drivers/ata/pata_via.c')
| -rw-r--r-- | drivers/ata/pata_via.c | 606 |
1 files changed, 325 insertions, 281 deletions
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index d119a68c388..1ca6bcab369 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -1,7 +1,6 @@ /* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Documentation * Most chipset documentation available under NDA only @@ -23,6 +22,7 @@ * VIA VT8233c - UDMA100 * VIA VT8235 - UDMA133 * VIA VT8237 - UDMA133 + * VIA VT8237A - UDMA133 * VIA VT8237S - UDMA133 * VIA VT8251 - UDMA133 * @@ -55,36 +55,29 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> +#include <linux/gfp.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" -/* - * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx - * driver. - */ +enum { + VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */ + VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */ + VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */ + VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */ + VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */ + VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */ + VIA_NO_ENABLES = 0x40, /* Has no enablebits */ + VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */ +}; enum { - VIA_UDMA = 0x007, - VIA_UDMA_NONE = 0x000, - VIA_UDMA_33 = 0x001, - VIA_UDMA_66 = 0x002, - VIA_UDMA_100 = 0x003, - VIA_UDMA_133 = 0x004, - VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ - VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ - VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ - VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ - VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ - VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ - VIA_NO_ENABLES = 0x400, /* Has no enablebits */ - VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ }; /* @@ -96,35 +89,54 @@ static const struct via_isa_bridge { u16 id; u8 rev_min; u8 rev_max; - u16 flags; + u8 udma_mask; + u8 flags; } via_isa_bridges[] = { - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, - { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, - { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { NULL } }; +static const struct dmi_system_id no_atapi_dma_dmi_table[] = { + { + .ident = "AVERATEC 3200", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AVERATEC"), + DMI_MATCH(DMI_BOARD_NAME, "3200"), + }, + }, + { } +}; + +struct via_port { + u8 cached_device; +}; /* * Cable special cases @@ -177,10 +189,10 @@ static int via_cable_detect(struct ata_port *ap) { return ATA_CBL_SATA; /* Early chips are 40 wire */ - if ((config->flags & VIA_UDMA) < VIA_UDMA_66) + if (config->udma_mask < ATA_UDMA4) return ATA_CBL_PATA40; /* UDMA 66 chips have only drive side logic */ - else if ((config->flags & VIA_UDMA) < VIA_UDMA_100) + else if (config->udma_mask < ATA_UDMA5) return ATA_CBL_PATA_UNK; /* UDMA 100 or later */ pci_read_config_dword(pdev, 0x50, &ata66); @@ -210,28 +222,15 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) return -ENOENT; } - return ata_std_prereset(link, deadline); + return ata_sff_prereset(link, deadline); } /** - * via_error_handler - reset for VIA chips - * @ap: ATA port - * - * Handle the reset callback for the later chips with cable detect - */ - -static void via_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -/** - * via_do_set_mode - set initial PIO mode data + * via_do_set_mode - set transfer mode data * @ap: ATA interface * @adev: ATA device * @mode: ATA mode being programmed - * @tdiv: Clocks per PCI clock * @set_ast: Set to program address setup * @udma_type: UDMA mode/format of registers * @@ -242,17 +241,27 @@ static void via_error_handler(struct ata_port *ap) * on the two channels. */ -static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) +static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, + int mode, int set_ast, int udma_type) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_device *peer = ata_dev_pair(adev); struct ata_timing t, p; - static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ + static int via_clock = 33333; /* Bus clock in kHZ */ unsigned long T = 1000000000 / via_clock; - unsigned long UT = T/tdiv; + unsigned long UT = T; int ut; int offset = 3 - (2*ap->port_no) - adev->devno; + switch (udma_type) { + case ATA_UDMA4: + UT = T / 2; break; + case ATA_UDMA5: + UT = T / 3; break; + case ATA_UDMA6: + UT = T / 4; break; + } + /* Calculate the timing values we require */ ata_timing_compute(adev, mode, &t, T, UT); @@ -271,44 +280,49 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo pci_read_config_byte(pdev, 0x4C, &setup); setup &= ~(3 << shift); - setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ + setup |= (clamp_val(t.setup, 1, 4) - 1) << shift; pci_write_config_byte(pdev, 0x4C, setup); } /* Load the PIO mode bits */ pci_write_config_byte(pdev, 0x4F - ap->port_no, - ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1)); + ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1)); pci_write_config_byte(pdev, 0x48 + offset, - ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1)); + ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); /* Load the UDMA bits according to type */ - switch(udma_type) { - default: - /* BUG() ? */ - /* fall through */ - case 33: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03; - break; - case 66: - ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f; - break; - case 100: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; - break; - case 133: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; - break; + switch (udma_type) { + case ATA_UDMA2: + default: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; + break; + case ATA_UDMA4: + ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; + break; + case ATA_UDMA5: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; + case ATA_UDMA6: + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; + break; } /* Set UDMA unless device is not UDMA capable */ - if (udma_type && t.udma) { - u8 cable80_status; + if (udma_type) { + u8 udma_etc; + + pci_read_config_byte(pdev, 0x50 + offset, &udma_etc); - /* Get 80-wire cable detection bit */ - pci_read_config_byte(pdev, 0x50 + offset, &cable80_status); - cable80_status &= 0x10; + /* clear transfer mode bit */ + udma_etc &= ~0x20; - pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status); + if (t.udma) { + /* preserve 80-wire cable detection bit */ + udma_etc &= 0x10; + udma_etc |= ut; + } + + pci_write_config_byte(pdev, 0x50 + offset, udma_etc); } } @@ -316,108 +330,148 @@ static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) { const struct via_isa_bridge *config = ap->host->private_data; int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; - int mode = config->flags & VIA_UDMA; - static u8 tclock[5] = { 1, 1, 2, 3, 4 }; - static u8 udma[5] = { 0, 33, 66, 100, 133 }; - via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); + via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask); } static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) { const struct via_isa_bridge *config = ap->host->private_data; int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; - int mode = config->flags & VIA_UDMA; - static u8 tclock[5] = { 1, 1, 2, 3, 4 }; - static u8 udma[5] = { 0, 33, 66, 100, 133 }; - via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); + via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask); } -static struct scsi_host_template via_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; +/** + * via_mode_filter - filter buggy device/mode pairs + * @dev: ATA device + * @mask: Mode bitmask + * + * We need to apply some minimal filtering for old controllers and at least + * one breed of Transcend SSD. Return the updated mask. + */ -static struct ata_port_operations via_port_ops = { - .set_piomode = via_set_piomode, - .set_dmamode = via_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = via_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = via_cable_detect, +static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask) +{ + struct ata_host *host = dev->link->ap->host; + const struct via_isa_bridge *config = host->private_data; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + if (config->id == PCI_DEVICE_ID_VIA_82C586_0) { + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + if (strcmp(model_num, "TS64GSSD25-M") == 0) { + ata_dev_warn(dev, + "disabling UDMA mode due to reported lockups with this device\n"); + mask &= ~ ATA_MASK_UDMA; + } + } - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, + if (dev->class == ATA_DEV_ATAPI && + dmi_check_system(no_atapi_dma_dmi_table)) { + ata_dev_warn(dev, "controller locks up on ATAPI DMA, forcing PIO\n"); + mask &= ATA_MASK_PIO; + } - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + return mask; +} - .data_xfer = ata_data_xfer, +/** + * via_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * Note: This is to fix the internal bug of via chipsets, which + * will reset the device register after changing the IEN bit on + * ctl register + */ +static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + struct via_port *vp = ap->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + int newctl = 0; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + newctl = 1; + } - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + vp->cached_device = tf->device; + } else if (newctl) + iowrite8(vp->cached_device, ioaddr->device_addr); + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } - .port_start = ata_sff_port_start, -}; + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } -static struct ata_port_operations via_port_ops_noirq = { - .set_piomode = via_set_piomode, - .set_dmamode = via_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = via_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = via_cable_detect, + ata_wait_idle(ap); +} - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, +static int via_port_start(struct ata_port *ap) +{ + struct via_port *vp; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + int ret = ata_bmdma_port_start(ap); + if (ret < 0) + return ret; - .data_xfer = ata_data_xfer_noirq, + vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL); + if (vp == NULL) + return -ENOMEM; + ap->private_data = vp; + return 0; +} - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, +static struct scsi_host_template via_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; - .port_start = ata_sff_port_start, +static struct ata_port_operations via_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = via_cable_detect, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .prereset = via_pre_reset, + .sff_tf_load = via_tf_load, + .port_start = via_port_start, + .mode_filter = via_mode_filter, +}; + +static struct ata_port_operations via_port_ops_noirq = { + .inherits = &via_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, }; /** @@ -454,6 +508,27 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags) } } +static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config) +{ + u32 timing; + + /* Initialise the FIFO for the enabled channels. */ + via_config_fifo(pdev, config->flags); + + if (config->udma_mask == ATA_UDMA4) { + /* The 66 MHz devices require we enable the clock */ + pci_read_config_dword(pdev, 0x50, &timing); + timing |= 0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } + if (config->flags & VIA_BAD_CLK66) { + /* Disable the 66MHz clock on problem devices */ + pci_read_config_dword(pdev, 0x50, &timing); + timing &= ~0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } +} + /** * via_init_one - discovery callback * @pdev: PCI device @@ -467,139 +542,124 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { /* Early VIA without UDMA support */ static const struct ata_port_info via_mwdma_info = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ static const struct ata_port_info via_mwdma_info_borked = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ static const struct ata_port_info via_udma33_info = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ static const struct ata_port_info via_udma66_info = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ static const struct ata_port_info via_udma100_info = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ static const struct ata_port_info via_udma133_info = { - .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; - struct ata_port_info type; - const struct ata_port_info *ppi[] = { &type, NULL }; - struct pci_dev *isa = NULL; + const struct ata_port_info *ppi[] = { NULL, NULL }; + struct pci_dev *isa; const struct via_isa_bridge *config; - static int printed_version; u8 enable; - u32 timing; + unsigned long flags = id->driver_data; + int rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; /* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ - for (config = via_isa_bridges; config->id; config++) + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(config->flags & VIA_BAD_ID), config->id, NULL))) { + u8 rev = isa->revision; + pci_dev_put(isa); + + if ((id->device == 0x0415 || id->device == 0x3164) && + (config->id != id->device)) + continue; - if (isa->revision >= config->rev_min && - isa->revision <= config->rev_max) + if (rev >= config->rev_min && rev <= config->rev_max) break; - pci_dev_put(isa); } - if (!config->id) { - printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); - return -ENODEV; - } - pci_dev_put(isa); - - /* 0x40 low bits indicate enabled channels */ - pci_read_config_byte(pdev, 0x40 , &enable); - enable &= 3; - if (enable == 0) { - return -ENODEV; + if (!(config->flags & VIA_NO_ENABLES)) { + /* 0x40 low bits indicate enabled channels */ + pci_read_config_byte(pdev, 0x40 , &enable); + enable &= 3; + if (enable == 0) + return -ENODEV; } - /* Initialise the FIFO for the enabled channels. */ - via_config_fifo(pdev, config->flags); - /* Clock set up */ - switch(config->flags & VIA_UDMA) { - case VIA_UDMA_NONE: - if (config->flags & VIA_NO_UNMASK) - type = via_mwdma_info_borked; - else - type = via_mwdma_info; - break; - case VIA_UDMA_33: - type = via_udma33_info; - break; - case VIA_UDMA_66: - type = via_udma66_info; - /* The 66 MHz devices require we enable the clock */ - pci_read_config_dword(pdev, 0x50, &timing); - timing |= 0x80008; - pci_write_config_dword(pdev, 0x50, timing); - break; - case VIA_UDMA_100: - type = via_udma100_info; - break; - case VIA_UDMA_133: - type = via_udma133_info; - break; - default: - WARN_ON(1); - return -ENODEV; - } + switch (config->udma_mask) { + case 0x00: + if (config->flags & VIA_NO_UNMASK) + ppi[0] = &via_mwdma_info_borked; + else + ppi[0] = &via_mwdma_info; + break; + case ATA_UDMA2: + ppi[0] = &via_udma33_info; + break; + case ATA_UDMA4: + ppi[0] = &via_udma66_info; + break; + case ATA_UDMA5: + ppi[0] = &via_udma100_info; + break; + case ATA_UDMA6: + ppi[0] = &via_udma133_info; + break; + default: + WARN_ON(1); + return -ENODEV; + } - if (config->flags & VIA_BAD_CLK66) { - /* Disable the 66MHz clock on problem devices */ - pci_read_config_dword(pdev, 0x50, &timing); - timing &= ~0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } + via_fixup(pdev, config); /* We have established the device type, now fire it up */ - type.private_data = (void *)config; - - return ata_pci_init_one(pdev, ppi); + return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP /** * via_reinit_one - reinit after resume * @pdev; PCI device @@ -612,34 +672,29 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int via_reinit_one(struct pci_dev *pdev) { - u32 timing; - struct ata_host *host = dev_get_drvdata(&pdev->dev); - const struct via_isa_bridge *config = host->private_data; + struct ata_host *host = pci_get_drvdata(pdev); + int rc; - via_config_fifo(pdev, config->flags); + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; - if ((config->flags & VIA_UDMA) == VIA_UDMA_66) { - /* The 66 MHz devices require we enable the clock */ - pci_read_config_dword(pdev, 0x50, &timing); - timing |= 0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } - if (config->flags & VIA_BAD_CLK66) { - /* Disable the 66MHz clock on problem devices */ - pci_read_config_dword(pdev, 0x50, &timing); - timing &= ~0x80008; - pci_write_config_dword(pdev, 0x50, timing); - } - return ata_pci_device_resume(pdev); + via_fixup(pdev, host->private_data); + + ata_host_resume(host); + return 0; } #endif static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, { PCI_VDEVICE(VIA, 0x0571), }, { PCI_VDEVICE(VIA, 0x0581), }, { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, + { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE }, { }, }; @@ -649,27 +704,16 @@ static struct pci_driver via_pci_driver = { .id_table = via, .probe = via_init_one, .remove = ata_pci_remove_one, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, .resume = via_reinit_one, #endif }; -static int __init via_init(void) -{ - return pci_register_driver(&via_pci_driver); -} - -static void __exit via_exit(void) -{ - pci_unregister_driver(&via_pci_driver); -} +module_pci_driver(via_pci_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for VIA PATA"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, via); MODULE_VERSION(DRV_VERSION); - -module_init(via_init); -module_exit(via_exit); |