1 files changed, 9 insertions, 46 deletions

diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index d9db3f8d60e..4e006d74bef 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -35,7 +35,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -168,8 +167,7 @@ static const unsigned long JCACTSELtbl[2][7] = {
 };
 
 static const struct pci_device_id scc_pci_tbl[] = {
-	{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
 	{ }	/* terminate list */
 };
 
@@ -531,7 +529,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
 	 *
 	 * Old drivers/ide uses the 2mS rule and then waits for ready.
 	 */
-	msleep(150);
+	ata_msleep(ap, 150);
 
 	/* always check readiness of the master device */
 	rc = ata_sff_wait_ready(link, deadline);
@@ -560,7 +558,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
 			lbal = in_be32(ioaddr->lbal_addr);
 			if ((nsect == 1) && (lbal == 1))
 				break;
-			msleep(50);	/* give drive a breather */
+			ata_msleep(ap, 50);	/* give drive a breather */
 		}
 
 		rc = ata_sff_wait_ready(link, deadline);
@@ -638,8 +636,7 @@ static int scc_softreset(struct ata_link *link, unsigned int *classes,
 	DPRINTK("about to softreset, devmask=%x\n", devmask);
 	err_mask = scc_bus_softreset(ap, devmask, deadline);
 	if (err_mask) {
-		ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
-				err_mask);
+		ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", err_mask);
 		return -EIO;
 	}
 
@@ -828,18 +825,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
 }
 
 /**
- *	scc_pata_prereset - prepare for reset
- *	@ap: ATA port to be reset
- *	@deadline: deadline jiffies for the operation
- */
-
-static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
-	link->ap->cbl = ATA_CBL_PATA80;
-	return ata_sff_prereset(link, deadline);
-}
-
-/**
  *	scc_postreset - standard postreset callback
  *	@ap: the target ata_port
  *	@classes: classes of attached devices
@@ -948,7 +933,7 @@ static struct ata_port_operations scc_pata_ops = {
 	.bmdma_status		= scc_bmdma_status,
 	.sff_data_xfer		= scc_data_xfer,
 
-	.prereset		= scc_pata_prereset,
+	.cable_detect		= ata_cable_80wire,
 	.softreset		= scc_softreset,
 	.postreset		= scc_postreset,
 
@@ -960,7 +945,7 @@ static struct ata_port_operations scc_pata_ops = {
 
 static struct ata_port_info scc_port_info[] = {
 	{
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
 		/* No MWDMA */
 		.udma_mask	= ATA_UDMA6,
@@ -1073,15 +1058,12 @@ static int scc_host_init(struct ata_host *host)
 
 static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	static int printed_version;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
 	const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
 	struct ata_host *host;
 	int rc;
 
-	if (!printed_version++)
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			   "version " DRV_VERSION "\n");
+	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
 	if (!host)
@@ -1114,32 +1096,13 @@ static struct pci_driver scc_pci_driver = {
 	.id_table		= scc_pci_tbl,
 	.probe			= scc_init_one,
 	.remove			= ata_pci_remove_one,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	.suspend		= ata_pci_device_suspend,
 	.resume			= ata_pci_device_resume,
 #endif
 };
 
-static int __init scc_init (void)
-{
-	int rc;
-
-	DPRINTK("pci_register_driver\n");
-	rc = pci_register_driver(&scc_pci_driver);
-	if (rc)
-		return rc;
-
-	DPRINTK("done\n");
-	return 0;
-}
-
-static void __exit scc_exit (void)
-{
-	pci_unregister_driver(&scc_pci_driver);
-}
-
-module_init(scc_init);
-module_exit(scc_exit);
+module_pci_driver(scc_pci_driver);
 
 MODULE_AUTHOR("Toshiba corp");
 MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");